Rev 1.0

Page 10 of 12

www.sitime.com

Dimensions and Patterns

Package Size – Dimensions (Unit: mm)

[8]

Recommended Land Pattern (Unit: mm)

[9]

3.2 x 2.5 x 0.75 mm

3.2 x 2.5 x 0.75 mm

7.0 x 5.0 x 0.90 mm

[10]

7.0 x 5.0 x 0.90 mm

[10]

Notes:

8. Top Marking: Y denotes manufacturing origin and XXXX denotes manufacturing lot number. The value of “Y” will depend on the assembly location of the

device.

9. A capacitor of value 0.1 µF or higher between Vdd and GND is required. An additional 10 µF capacitor between Vdd and GND is required for the best

phase jitter performance

10. The center pad has no electrical function. Soldering down the center pad to the GND is recommended for best thermal dissipation, but is optional.