MP2235

– SYNCHRONOUS STEP-DOWN CONVERTER WITH INTERNAL MOSFETS

NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third

party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not

assume any legal responsibility for any said applications.

MP2235 Rev. 1.0

www.MonolithicPower.com

21

5/16/2013

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2013 MPS. All Rights Reserved.

PACKAGE INFORMATION

TSOT23-8

FRONT VIEW

NOTE:

1) ALL DIMENSIONS ARE IN MILLIMETERS.

2) PACKAGE LENGTH DOES NOT INCLUDE MOLD

FLASH, PROTRUSION OR GATE BURR.

3) PACKAGE WIDTH DOES NOT INCLUDE

INTERLEAD FLASH OR PROTRUSION.

4) LEAD COPLANARITY (BOTTOM OF LEADS

AFTER FORMING) SHALL BE 0.10 MILLIMETERS

MAX.

5) JEDEC REFERENCE IS MO-193, VARIATION BA.

6) DRAWING IS NOT TO SCALE.

7) PIN 1 IS LOWER LEFT PIN WHEN READING TOP

MARK FROM LEFT TO RIGHT, (SEE EXAMPLE TOP

MARK)

TOP VIEW

RECOMMENDED LAND PATTERN

SEATING PLANE

SIDE VIEW

DETAIL ''A''

SEE DETAIL ''A''

IAAAA

PIN 1 ID

See note 7

EXAMPLE

TOP MARK