Rev C

DCPDL06 SERIES

6 Watt DC/DC Power Converters

07/10/2013

Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •

Fax 603-778-9797

website: www.wallindustries.com • e-mail: sales@wallindustries.com

Page 3 of 7

SPECIFICATIONS: DCPDL06 SERIES

All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.

We reserve the right to change specifications based on technological advances.

SPECIFICATION

TEST CONDITIONS

Min

Typ

Max

Unit

ENVIRONMENTAL SPECIFICATIONS

Operating Ambient Temperature

Without derating

Standard models

-40

+65

°C

Suffix “M” models

-40

+70

°C

Suffix “H” models

-40

+65

°C

Storage Temperature

-55

+125

°C

Relative Humidity

5

95

% RH

Thermal Shock

MIL-STD-810F

Vibration

MIL-STD-810F

MTBF

BELLCORE TR-NWT-000332. Case 1: 50% Stress, Ta =

40°C

2,097,000 hours

MIL-HDBK-217F, Ta=25°C, Full

load (G/B controlled environment)

Standard models

770,500 hours

Suffix “H” models

770,500 hours

Suffix “M” models

998,700 hours

PHYSICAL SPECIFICATIONS

Weight

Standard models

0.17oz (4.8g)

Suffix “M” models

0.21oz (5.9g)

Suffix “H” models

0.17oz (4.8g)

Dimensions (L x W x H)

Standard models

0.86x0.36x0.44 inch

(21.8x9.1x11.2 mm)

Suffix “M” models

0.86x0.36x0.44 inch

(21.8x9.1x11.2 mm)

Suffix “H” models

0.86x0.36x0.44 inch

(21.8x9.1x11.2 mm)

Case Material

Standard models

Non-conductive black plastic

Suffix “M” models

Copper

Suffix “H” models

Non-conductive black plastic

Base Material

none

Potting Material

Silicon (UL94-V0)

SAFETY & EMC CHARACTERISTICS

Safety Approvals

IEC60950-1, UL60950-1, EN60950-1

EMI (See Note 1)

EN55022

Class A, Class B

ESD

EN61000-4-2

Air

Contact

±8KV

±6KV

Perf. Criteria A

Radiated Immunity

EN61000-4-3

10 V/m

Perf. Criteria A

Fast Transient (See Note 2)

EN61000-4-4

±2KV

Perf. Criteria A

Surge (See Note 2)

EN61000-4-5

±1KV

Perf. Criteria A

Conducted Immunity

EN61000-4-6

10 Vrms

Perf. Criteria A

NOTES

1. The DCPDL06 series can only meet EMI Class A or Class B and input reflected ripple current with external components added. Please

contact factory for more information.

2. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.

The following are the filter capacitors recommended:5VDC input models: Nippon chemi-con KY series, 330µF/50V

Other input models: Nippon chemi-con KY series, 220µF/100V

3. Two case types are available for this series. Plastic case is standard; for the metal case add the suffix “M” to the model number. See the

model number setup on page 7 for ordering details.

4. 1600VDC I/O isolation is standard; for 3000VDC I/O isolation add the suffix “H” to the model number (Ex: DCPDL06-24S12H). 3000VDC

I/O isolation is only available for plastic case models.

CAUTION: This power module is not internally fused. An input line fuse must always be used.

*Due to advances in technology, specifications subject to change without notice.