3

Assembly Instruction

Assembly Instructions

1. TRIM CABLE JACKET ONLY, AS SHOWN ABOVE.

2. SLIDE BACK NUT ONTO CABLE UNTIL TRIMMED END OF JACKET IS FLUSH WITH FRONT

OF NUT. SOLDER NUT TO CABLE.

3. TRIM DIELECTRIC AS SHOWN.

4. INSTALL INSULATOR OVER CABLE CENTER CONDUCTOR.

5. SOLDER CONTACT TO CENTER CONDUCTOR.

6. INSERT CABLE ASSEMBLY INTO CONNECTOR BODY AND TIGHTEN TO 35-45 INCH-

OUNCES TORQUE.

PE45370 REV 1.0

Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,

inventory and certifications: SSMC Jack Bulkhead Mount Connector Clamp/Solder Attachment for PE-SR405AL, PE-SR-

405FL, PE-SR405FLJ, PE-SR405TN, RG405 PE45370

RF Connectors Technical Data Sheet

PE45370

SSMC Jack Bulkhead Mount Connector Clamp/

Solder Attachment for PE-SR405AL, PE-SR405FL,

PE-SR405FLJ, PE-SR405TN, RG405