PRV6

www.vishay.com

Vishay Sfernice

Revision: 04-Jul-17

4

Document Number: 51035

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

MARKING

• Vishay trademark

• Part number

• Manufacturing date code

•Terminal: 1

PACKAGING

• Box of 15, 20, 25, or 50 pieces, code B12, B15, B17, or B25, depending of body and shaft construction

OPTIONS

SPECIAL FEATURES

Panel sealing

Except for dia. 4 mm shaft, an O.ring is supplied with the potentiometer. This O.ring should be placed

into the groove of the body and ensures the panel sealing.

For dia. 4 mm shaft please see note “P” in ordering information.

Shaft locking

Shafts

Shaft lengths are measured from the mounting face to the free end of the shaft. Special shafts are

available if the customer supplies a drawing. The shaft slot is aligned to the wiper within ± 10°.

Hardware

Nuts, washer and O.ring are separately supplied (not mounted on the potentiometer), in a small bag

placed in the packaging.

Locating peg

Except for dia. 4 mm shaft, the potentiometers are delivered with 2 opposite locating pegs orientated

at 45°.These 2 pegs can be easily broken-off by the customer. On request, the orientation of the pegs

can be at 30° instead of 45°.