KK270P-3CD3CG

HIGH EFFICIENCY MULTICRYSTALLINE

PHOTOVOLTAIC MODULE

HIGHLIGHTS OF KYOCERA PHOTOVOLTAIC MODULES

APPLICATIONS

LIMITED WARRANTY

ELECTRICAL CHARACTERISTICS

This module has passed 2,400Pa mechanical load test based on IEC61215 ed.2

This module is manufactured in ISO9001 certified factories.

Registered No.: JMI0036 (Japan), CN07/00321(China), FM26856 (Mexico)

TUV.COM Internet platform for tested quality and service ID 0000023299.

Kyocera’s advanced cell processing technology and automated production facilities produce highly efficient multi crystalline

photovoltaic modules.

The conversion efficiency of the Kyocera solar cell is over 18.4%.

These cells are encapsulated between a tempered glass cover and a EVA pottant with back sheet to provide efficient

protection from severe environmental conditions.

The entire laminate is installed an anodized aluminum frame to provide structural strength and ease of installation.

Equipped with plug in connectors.

Grid-Connected Systems

Stand -Alone Solar Power Systems for

data monitoring

(Long term output warranty shall warrant if PV Module(s) exhibits power output of less than 90% of the original minimum rated power specified at the time of sale within 10 years and

less than 80% within 25

years after the date of sale the Customer. The power output values shall be those measured under Kyocera‘s standard measurement conditions. Regarding

the warranty conditions in detail, please refer to Warranty issued by Kyocera)

Current-Voltage characteristics of Photovoltaic Module

KK270P-3CD3CG at various cell temperatures

at Kyocera Corporation laboratory.

Current-Voltage characteristics of Photovoltaic

Module KK270P-3CD73CG at various irradiance levels

at Kyocera Corporation laboratory.

0

1

2

3

4

5

6

7

8

9

10

0

1

2

3

4

5

6

7

8

9

10

0

10

20

30

40

50

0

10

20

30

40

75

̊C 50 ̊C 25 ̊C