000-0059M1730-104

Page 2 of 18

SLG59M1730C

Pin Description

Ordering Information

Pin #

Pin Name

Type

Pin Description

A1

ON

Input

A low-to-high transition on this pin initiates the operation of the SLG59M1730C. ON is

the ON pin input circuit does not have an internal pull-down resistor, connect this pin

to a general-purpose output (GPO) of a microcontroller, an application processor, or a

system controller – do not allow this pin to be open-circuited. In order to activate the

SLG59M1730C’s controlled inrush current control circuitry, ON shall be toggled HIGH

B1

VIN

MOSFET

Input terminal connection of the p-channel MOSFET. Connect a 10 µF (or larger)

low-ESR capacitor from this pin to ground. Capacitors used at VIN should be rated at

10 V or higher.

B2

VOUT

MOSFET

Output terminal connection of the p-channel MOSFET. For optimal operation of the

SLG59M1730C controlled inrush current profile, connect a 30 µF (or smaller) capacitor

from this pin to ground. Capacitors used at VOUT should be rated at 10 V or higher.

A2

GND

GND

Ground connection. Connect this pin to system analog or power ground plane.

Part Number

Type

Production Flow

SLG59M1730C

WLCSP 4L

Industrial, -40

°C to 85 °C

SLG59M1730CTR

WLCSP 4L (Tape and Reel)

Industrial, -40

°C to 85 °C