InGaN Chip Led

HT-12H Series

Official Product

Product: HT-12H Series

Data Sheet No.

Tentative Product

****************

HT-12H Series

Specifications are subject to change without notice. Data and

drawings herein are copyrighted.

June 18, 2013

Version of 1.0

Page

5/21

Specification

Material

Quantity

Resin

Water clear

Epoxy resin

Carrier tape

Per EIA 481-1A specs

Conductive black tape

4000pcs per reel

Reel

Per EIA 481-1A specs

Conductive black

Label

HT standard

Paper

Packing bag

220x240mm

Aluminum laminated bag/ no-zipper

One reel per bag

Carton

HT standard

Paper

Others:

Each immediate box consists of 5 reels. The 5 reels may not necessarily have the same lot number or the same

bin combinations of Iv,

of a product label as well.

ATTENTION: Electrostatic Discharge (ESD) protection

The symbol to the left denotes that ESD precaution is needed. ESD protection for

GaP and AlGaAs based chips is necessary even though they are relatively safe in

the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and

InGaN based chips are STATIC SENSITIVE devices. ESD precaution must be taken during

design and assembly.

If manual work or processing is needed, please ensure the device is adequately protected

from ESD during the process.