www.ti.com

ABSOLUTE MAXIMUM RATINGS

TPS73001, TPS73018

TPS73025

TPS73030, TPS73033

SBVS054A – NOVEMBER 2004 – REVISED NOVEMBER 2004

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated

circuits be handled with appropriate precautions. Failure to observe proper handling and installation

procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision

integrated circuits may be more susceptible to damage because very small parametric changes could

cause the device not to meet its published specifications.

PRODUCT

VOLTAGE

PACKAGE

SYMBOL

PART NUMBER

TPS73001

1.22 V to 5.5 V

SOT23 (DBV)

PGVI

TPS73001DBVR

TPS73018

1.8 V

SOT23 (DBV)

PHHI

TPS73018DBVR

TPS73025

2.5 V

SOT23 (DBV)

-40

°C to +125°C

PGWI

TPS73025DBVR

TPS73030

3 V

SOT23 (DBV)

PGYI

TPS73030DBVR

TPS73033

3.3 V

SOT23 (DBV)

PHUI

TPS73033DBVR

(1)

For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet.

(2)

DBVR indicates tape and reel of 3000 parts.

UNIT

-0.3 V to 6 V

-0.3 V to 6 V

Peak output current

Internally limited

ESD rating, HBM

2 kV

ESD rating, CDM

500 V

Continuous total power dissipation

See Dissipation Ratings Table

Junction temperature range

-40

°C to 150°C

-65

°C to 150°C

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

2