| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
W032240JL-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() TME | D2AW0329D | OMRON Corporation | Microswitch SNAP ACTION |
| 311 | |
| D2AW0325A | OMRON Corporation | Microswitch SNAP ACTION |
| 264 | ||
| D2AW0328F | OMRON Corporation | Microswitch SNAP ACTION |
| 80 | ||
| LU202W032GG4 | KIOXIA | Pendrive: USB A; USB 2.0; 32GB; HAYABUSA; white |
| 40 | ||
| W032015 | WORKPRO | Clamp; universal; aluminium; max.51mm |
| 16 | ||
| LU301W032GG4 | KIOXIA | Pendrive: USB A; USB 3.2; 32GB; HAYABUSA; white |
| 13 | ||
| TW-03-25 | igus Inc | Trolley; aluminium,iglidur® J2; DryLin® T; linear guides |
| 2 | ||
| EVW032 | ifm efector inc | Cable: for sensors; automatics |
| 0 | ||
| F5L150S25W-032 | Advanced Thermal Solutions Inc | Heatsink: heat pipe; flat; natural; L: 150mm; copper; raw; 24W |
| 0 | ||
| EFW(03)-240X80T0800 | KEMET Corporation | Mat EMI/EMC: shielding; 240x80x0.3mm; Permeability: 230; EFW |
| 0 | ||
| EFW(03)-240X240 | KEMET Corporation | Mat EMI/EMC: shielding; 240x240x0.3mm; Permeability: 230; EFW |
| 0 | ||
| EFW(03)-240X240T0800 | KEMET Corporation | Mat EMI/EMC: shielding; 240x240x0.3mm; Permeability: 230; EFW |
| 0 | ||
| SNFPW032207HD2KSSD | Wima | Capacitor: polypropylene; 220nF; 3kVDC; 24x45.5x41.5mm; ±10% RoHS : Compliant |
| 0 | ||
| MKP1W032207F00KSSD | Wima | Capacitor: polypropylene; 220nF; 3kVDC; 700VAC; 41.5x19x32mm; THT RoHS : Compliant |
| 0 | ||
| W1W032768D06ZDT | WTL | Crystal; 32.768kHz; 6pF; ±20ppm; ±3ppm/year; 2x1.2x0.6mm; -40÷85°C |
| 0 | ||
![]() Avnet Americas | DW-03-20-G-D-770 | Samtec Inc | - Bulk (Alt: DW-03-20-G-D-770) RoHS : Compliant |
| 0 | |
| DW-03-20-L-D-834 | Samtec Inc | Board Stackers & Spacers, Pin Header, 21.18 mm, 6 Contacts, Solder, 2 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-03-20-L-D-834) RoHS : Compliant |
| 0 | ||
| DW-03-20-T-D-625 | Samtec Inc | - Bulk (Alt: DW-03-20-T-D-625) RoHS : Compliant |
| 0 | ||
| HW-03-20-G-S-330-SM | Samtec Inc | Board Stackers & Spacers, Pin Header, 8.38 mm, 3 Contacts, Solder, 1 Rows, 2.54 mm - Bulk (Alt: HW-03-20-G-S-330-SM) RoHS : Compliant |
| 0 | ||
| DW-03-20-L-S-730 | Samtec Inc | - Bulk (Alt: DW-03-20-L-S-730) RoHS : Compliant |
| 0 | ||
| DW-03-20-S-S-610 | Samtec Inc | - Bulk (Alt: DW-03-20-S-S-610) RoHS : Compliant |
| 0 | ||
| ZW-03-20-T-S-850-140 | Samtec Inc | - Bulk (Alt: ZW-03-20-T-S-850-140) RoHS : Compliant |
| 0 | ||
| DW-03-20-T-D-827 | Samtec Inc | - Bulk (Alt: DW-03-20-T-D-827) RoHS : Compliant |
| 0 | ||
| CPW032K500FB14 | Vishay Intertechnologies | CPW-3 2.5K 1% B14 - Bulk (Alt: CPW032K500FB14) RoHS : Not Compliant |
| 0 | ||
| HW-03-20-F-D-750-SM | Samtec Inc | - Bulk (Alt: HW-03-20-F-D-750-SM) RoHS : Compliant |
| 0 | ||
| HW-03-20-F-D-800-SM-A | Samtec Inc | Board Stackers & Spacers, Pin Header, 20.32 mm, 6 Contacts, Solder, 2 Rows, 2.54 mm, HW Series - Bulk (Alt: HW-03-20-F-D-800-SM-A) RoHS : Compliant |
| 0 | ||
| HW-03-20-F-D-835-SM-A | Samtec Inc | Board Stackers & Spacers, Pin Header, 21.21 mm, 6 Contacts, Solder, 2 Rows, 2.54 mm, HW Series - Bulk (Alt: HW-03-20-F-D-835-SM-A) RoHS : Compliant |
| 0 | ||
| HW-03-20-F-D-550-SM | Samtec Inc | - Bulk (Alt: HW-03-20-F-D-550-SM) RoHS : Compliant |
| 0 | ||
| K32W032S1M2VPJAT | NXP Semiconductors | - Trays (Alt: K32W032S1M2VPJAT) RoHS : Compliant | 0 | |||
| HW-03-20-L-D-866-SM-A | Samtec Inc | Board Stackers & Spacers, Pin Header, 22 mm, 6 Contacts, Solder, 2 Rows, 2.54 mm, HW Series - Bulk (Alt: HW-03-20-L-D-866-SM-A) RoHS : Compliant |
| 0 | ||
![]() Newark | DW-03-20-G-D-770 | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. DW-03-20-G-D-770 RoHS : Compliant |
| 1,901 | |
| DW-03-20-L-D-748 | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. DW-03-20-L-D-748 RoHS : Compliant |
| 1,901 | ||
| ZW-03-20-L-D-787-120 | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. ZW-03-20-L-D-787-120 RoHS : Compliant |
| 1,901 | ||
| DW-03-20-T-D-625 | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. DW-03-20-T-D-625 RoHS : Compliant |
| 798 | ||
| DW-03-20-G-S-748 | Samtec Inc | Conn Stack Brd, 2.54Mm, 3Pos, Hdr; |Samtec, Inc. DW-03-20-G-S-748 RoHS : Compliant |
| 354 | ||
| DW-03-20-L-S-730 | Samtec Inc | Conn Stack Brd, 2.54Mm, 3Pos, Hdr; |Samtec, Inc. DW-03-20-L-S-730 RoHS : Compliant |
| 339 | ||
| DW-03-20-S-S-610 | Samtec Inc | Conn Stack Brd, 2.54Mm, 3Pos, Hdr; |Samtec, Inc. DW-03-20-S-S-610 RoHS : Compliant |
| 339 | ||
| DW-03-20-T-S-846 | Samtec Inc | Conn Stack Brd, 2.54Mm, 3Pos, Hdr; |Samtec, Inc. DW-03-20-T-S-846 RoHS : Compliant |
| 326 | ||
| ZW-03-20-T-S-850-140 | Samtec Inc | Conn Stack Brd, 2.54Mm, 3Pos, Hdr; |Samtec, Inc. ZW-03-20-T-S-850-140 RoHS : Compliant |
| 326 | ||
| DW-03-20-T-D-827 | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. DW-03-20-T-D-827 RoHS : Compliant |
| 309 | ||
| DW-03-20-G-Q-750 | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. DW-03-20-G-Q-750 RoHS : Compliant |
| 297 | ||
| HW-03-20-T-D-905-SM | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. HW-03-20-T-D-905-SM RoHS : Compliant |
| 288 | ||
| HW-03-20-T-D-800-SM | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. HW-03-20-T-D-800-SM RoHS : Compliant |
| 288 | ||
| DW-03-20-T-D-900-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 6Pos, Hdr; |Samtec, Inc. DW-03-20-T-D-900-LL RoHS : Compliant |
| 240 | ||
| SW-032-135 | Bivar Inc | Fasteners, Screw Insulator Washer; Inter |Bivar SW-032-135 RoHS : Compliant |
| 12 | ||
![]() RS | SW-032-135 | Bivar Inc | SHOULDER WASHER, HI-TEMP,#4 SCREW,.130OD/.032 H BUSHING, BLK POLYPHENYLENE SULFIDE RoHS : Compliant |
| 796 | |
| RTW03-25RC (HWS100A-3/A) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC, 115230VAC, OUTPUT 3.3V 25A,82.5W |
| 1 | ||
| FW0320B | Essentra Components | FLAT WASHER:BLACK NYLON |
| 0 | ||
| FW0328B | Essentra Components | FLAT WASHER: BLACK NYLON |
| 0 | ||
| FW0322B | Essentra Components | FLAT WASHER: BLACK NYLON |
| 0 | ||
| FW0324B | Essentra Components | FLAT WASHER: BLACK NYLON |
| 0 | ||
| CW032020 | Metal Work Pneumatic USA Inc | ROD, REPLACEMENT, FOR CYLINDER, FOR 122L32F020 |
| 0 | ||
| MAPW0320D | MTE Corp | MTE MATRIX AP HARMONIC FILTER 480V;60HZ 320A NEMA3R |
| 0 | ||
| RLW-032207 | MTE Corp | MTE RLW LINE/LOAD REACTOR 208-690V;50-60HZ 322A OPEN 0.225MH |
| 0 | ||
| MAPW0320D009 | MTE Corp | MTE MATRIX AP HARMONIC FILTER 480V;60HZ 320A NEMA3R W/ 009 CONTACTOR OPTION |
| 0 | ||
| GTND-W-032-075 | Fabco-Air | CYLINDER, AIR, COMPACT, MAGNET, GUIDED TOOLPLATE, 32MM BORE, NPT, GLOBAL SERIES |
| 0 | ||
| S85049/90-11W03-230S | SOURIAU-SUNBANK | STAINLESS STEEL & TITANIUM BACKSHELLS |
| 0 | ||
| S85049/88-25W03-230S | SOURIAU-SUNBANK | ALUMINUM & BRONZE BACKSHELLS |
| 0 | ||
| RTW03-25R (HWS100A-3) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC, 115230VAC, OUTPUT 3.3V 25A,82.5W |
| 0 | ||
| V451SW03-2ZA00-0 (RCV-00012813 | V451SW03-2ZA00-0 | V451SW032ZA000) | Carling Technologies | ROCKER SWITCH;SEALED;CONTURA;V-SERIES |
| 0 | ||
![]() Microchip Technology Inc | PIC16CR57C/W032 | Microchip Technology Inc | No description available, Projected EOL: - Contact for Pricing | 0 | ||
![]() Bisco Industries | PF11MW-032-12 | PennEngineering (PEM) | 1,808 | |||
| PF11MW-032-11 | PennEngineering (PEM) | 741 | ||||
| SW-032-135 | Bivar Inc | RoHS : Compliant | 668 | |||
| 159-W03-2P | NUTS | 44 | ||||
| PF11MW-032-11BL | PennEngineering (PEM) | 13 | ||||
![]() Sager | DW-03-20-G-D-770 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 1,901 | |
| DW-03-20-L-D-834 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 1,901 | ||
| DW-03-20-L-S-730 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 339 | ||
| DW-03-20-S-S-610 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 339 | ||
| DW-03-20-T-D-827 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 309 | ||
| DW-03-20-F-S-800 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-03-20-G-S-744 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-03-20-S-D-800 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-03-20-F-D-575 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-03-20-F-S-840 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-03-20-G-D-888 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-03-20-F-D-750-SM | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HW-03-20-F-D-800-SM-A | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HW-03-20-F-D-835-SM-A | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HW-03-20-F-S-975-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() ComSIT USA | M58LW032C90N6E![]() | STMicroelectronics | 32 MBIT (2MBIT X 16, UNIFORM BLOCK, BURST) 3V SUPPLY FLASH MEMORY Flash, 2MX16, 90ns, PDSO56 RoHS : Compliant | 429 | ||
![]() Interstate Connecting Components | SW-032-135 | Bivar Inc | SHOULDER WASHER, HI-TEMP, #4 SCREW, 0.130 OD / 0.032 H BUS RoHS : Compliant |
| 9,154 | |
| 687-461XW032U | Glenair Inc | MICRO-D HARDWARE HOLE CAP ASSEMBLY |
| 30 | ||
| M85049/144S20W03-2 | Amphenol PCD | M85049144S20W03-2 | 0 | |||
| M85049/144S16W03-2 | Amphenol PCD | M85049144S16W03-2 | 0 | |||
| M85049/144S44W03-2 | Amphenol PCD | M85049144S44W03-2 | 0 | |||
| M85049/144-14W03-2 | Amphenol PCD | M85049144-14W03-2 | 0 | |||
| M85049/144-12W03-2 | Amphenol PCD | M85049144-12W03-2 | 0 | |||
| M85049/144S61W03-2 | Amphenol PCD | M85049144S61W03-2 | 0 | |||
| M85049/144S03W03-2 | Amphenol PCD | M85049144S03W03-2 | 0 | |||
| M85049/144-18W03-2 | Amphenol PCD | M85049144-18W03-2 | 0 | |||
| M85049/144-22W03-2 | Amphenol PCD | M85049144-22W03-2 | 0 | |||
| M85049/144-24W03-2 | Amphenol PCD | M85049144-24W03-2 | 0 | |||
| M85049/144S24W03-2 | Amphenol PCD | M85049144S24W03-2 | 0 | |||
| M85049/144-20W03-2 | Amphenol PCD | M85049144-20W03-2 | 0 | |||
| M85049/144S28W03-2 | Amphenol PCD | M85049144S28W03-2 | 0 | |||
![]() NexGen Digital | MKP1W032207F00KSSD | Wima | RoHS : Compliant | 12,880 | ||
![]() Powell Electronics | DW-03-20-G-D-770 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 1,255 | |
| DW-03-20-L-D-834 | Samtec Inc | Flexible Board Stacking Header, 0.100 Pi RoHS : Compliant |
| 1,255 | ||
| ZW-03-20-G-D-554-288 | Samtec Inc | Cable Assembly, Wire-to-Board, ZIF RoHS : Compliant |
| 1,255 | ||
| DW-03-20-L-D-748 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 1,255 | ||
| ZW-03-20-L-D-787-120 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 1,255 | ||
| DW-03-20-T-D-625 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 527 | ||
| HW-03-20-G-S-330-SM | Samtec Inc | Cable Assembly, Wire-to-Board, High-Prof RoHS : Compliant |
| 379 | ||
| DW-03-20-G-S-748 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 234 | ||
| DW-03-20-L-S-730 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 224 | ||
| DW-03-20-S-S-610 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 224 | ||
| ZW-03-20-T-S-850-140 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 215 | ||
| DW-03-20-T-S-846 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 215 | ||
| DW-03-20-T-D-827 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 204 | ||
| HW-03-20-T-D-905-SM | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 190 | ||
| HW-03-20-T-D-800-SM | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 190 | ||
![]() Chip 1 Exchange | M58LW032C90N1 | INSTOCK | 998 | |||
| M58LW032C90N6 | INSTOCK | 495 | ||||
M58LW032C90ZA6E![]() | STMicroelectronics | INSTOCK RoHS : Compliant | 190 | |||
![]() Avnet Abacus | DW-03-20-G-S-748 | Samtec Inc | Stacking Board Connector DW Series 3 Contacts Header 254 mm Through Hole 1 Rows (Alt: DW-03-20-G-S-748) RoHS : Compliant | 0 | ||
| EW-03-20-G-D-510 | Samtec Inc | (Alt: EW-03-20-G-D-510) RoHS : Compliant | 0 | |||
| DW-03-20-F-S-855 | Samtec Inc | Board Stackers Spacers Pin Header 2172 mm 3 Contacts Solder 1 Rows 254 mm DW Series (Alt: DW-03-20-F-S-855) RoHS : Compliant | 0 | |||
| EW-03-20-T-D-650 | Samtec Inc | Stacking Board Connector EW Series 6 Contacts Header 254 mm Through Hole 2 Rows (Alt: EW-03-20-T-D-650) RoHS : Compliant | 0 | |||
| DW-03-20-F-D-787 | Samtec Inc | (Alt: DW-03-20-F-D-787) RoHS : Compliant | 0 | |||
| DW-03-20-G-D-780 | Samtec Inc | Board Stackers Spacers Pin Header 1981 mm 6 Contacts Solder 2 Rows 254 mm DW Series (Alt: DW-03-20-G-D-780) RoHS : Compliant | 0 | |||
| DW-03-20-L-D-600 | Samtec Inc | Stacking Board Connector DW Series 6 Contacts Header 254 mm Through Hole 2 Rows (Alt: DW-03-20-L-D-600) RoHS : Compliant | 0 | |||
| HW-03-20-L-D-787-SM | Samtec Inc | Board Stackers Spacers Pin Header 1999 mm 6 Contacts Solder 2 Rows 254 mm HW Series (Alt: HW-03-20-L-D-787-SM) RoHS : Compliant | 0 | |||
| HW-03-20-G-D-785-SM | Samtec Inc | Stacking Board Connector HW Series 6 Contacts Header 254 mm Surface Mount 2 Rows (Alt: HW-03-20-G-D-785-SM) RoHS : Compliant | 0 | |||
| EFW(03)-240X80T0800 | KEMET Corporation | Noise Suppression Sheet for Mobile Phone Display Digital Still Camera Digital Video Camera (Alt: EFW(03)-240X80T0800) RoHS : Compliant | 0 | |||
| ZW-03-20-G-D-554-288 | Samtec Inc | (Alt: ZW-03-20-G-D-554-288) RoHS : Compliant | 0 | |||
| HW-03-20-G-D-840-125 | Samtec Inc | Board Stackers Spacers Pin Header 2134 mm 6 Contacts Solder 2 Rows 254 mm HW Series (Alt: HW-03-20-G-D-840-125) RoHS : Compliant | 0 | |||
| ZW-03-20-G-S-886-122 | Samtec Inc | (Alt: ZW-03-20-G-S-886-122) RoHS : Compliant | 0 | |||
| HW-03-20-G-D-536-297 | Samtec Inc | Stacking Board Connector HW Series 6 Contacts Header 254 mm Through Hole 2 Rows (Alt: HW-03-20-G-D-536-297) RoHS : Compliant | 0 | |||
| HW-03-20-F-D-835-SM-A | Samtec Inc | Board Stackers Spacers Pin Header 2121 mm 6 Contacts Solder 2 Rows 254 mm HW Series (Alt: HW-03-20-F-D-835-SM-A) RoHS : Compliant | 0 | |||
![]() Avnet Asia | B59110W2111W032 | TDK Corporation | Ultrasonic Sensor, 45? Beam Angle, 74.5 kHz, -40 ?C to 85 ?C, 2 m, W2110W111 Series (Alt: B59110W2111W032) RoHS : Compliant | 0 | ||
![]() Avnet Silica | K32W032S1M2VPJAT | NXP Semiconductors | ARM MCU 32bit ARM CortexM4 ARM CortexM0 72 MHz 125 MB 384 KB 176 Pins VFBGA (Alt: K32W032S1M2VPJAT) RoHS : Compliant | 0 | ||
| K32W032S1M2CAVAR | NXP Semiconductors | ARM MCU 32bit ARM CortexM4 ARM CortexM0 72 MHz 125 MB 384 KB 191 Pins WLCSP (Alt: K32W032S1M2CAVAR) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | SW-032-135 | Bivar Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 550 | |
![]() DB Roberts | PF11MW-032-12 | PennEngineering (PEM) | Compensates for mating hole misalignment.Installs into any panel hardness. |
| 2,550 | |
| PF11MW-032-11BL | PennEngineering (PEM) | Compensates for mating hole misalignment.Installs into any panel hardness. |
| 809 | ||
| PF11MW-032-11 | PennEngineering (PEM) | Compensates for mating hole misalignment.Installs into any panel hardness. |
| 43 | ||
| NNN8-FLW-032-THK | Esterline NMC |
| 17 | |||
| 17W03223 | Essentra Components | FLAT WASHER, .189 ID, .330 OD, | 0 | |||
| PF11PMW-032-2B | PennEngineering (PEM) | 19-PANEL FASTENERS | 0 | |||
| 17W03281B | Essentra Components | FLAT WASHER, .280 ID, .335 OD, | 0 | |||
| PF12MW-032-11 | PennEngineering (PEM) | Compensates for mating hole misalignment.Installs into any panel hardness. | 0 | |||
| 17W03221B | Essentra Components | FLAT WASHER, .128 ID, .322 OD, | 0 | |||
| PF11PMW-032-1B | PennEngineering (PEM) | 19-PANEL FASTENERS | 0 | |||
| 17W03280B | Essentra Components | FLAT WASHER, .150 ID, .329 OD, | 0 | |||
| 17W03221 | Essentra Components | 0 | ||||
| 17W03280 | Essentra Components | FLAT WASHER, .150 ID, .329 OD, | 0 | |||
| 17W03281 | Essentra Components | FLAT WASHER, .280 ID, .335 OD, | 0 | |||
| 17W03223B | Essentra Components | FLAT WASHER, .189 ID, .330 OD, | 0 | |||
![]() Master Electronics | DW-03-20-F-Q-785 | Samtec Inc | RoHS : Compliant |
| 0 | |
| DW-03-20-F-S-675 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-03-20-F-S-800 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-03-20-F-T-845 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-03-20-G-S-744 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-03-20-L-D-795 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-03-20-L-S-565 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-03-20-S-D-800 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-03-20-T-D-827 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| EW-03-20-G-D-610 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EW-03-20-G-S-750 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| EW-03-20-G-D-650 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-03-20-F-D-575 | Samtec Inc | Conn Board Stacker HDR 6 POS 14.61mm Stack Height 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| DW-03-20-F-D-700 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-03-20-F-S-714 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | ASW0323-YT100-Y208 | IDEC Corporation | Industrial Panel Mount Indicators / Switch Indicators 22MM SEL.SW |
| 4 | |
| RTW0325RC | TDK-Lambda Corporation | Switching Power Supplies 82.5W 3.3V 25A |
| 0 | ||
| B59110W2111W032 | TDK Corporation | Distance Sensor Modules Ultrasonic sensor module USSM1.0 Plus FM |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03293/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to SMA Male Cable 12 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly N male to SMA male cable 12 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to SMA male cable 12 inch length using RG142 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W03293/HS-12 can also be known as a type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.97-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03293/HS-12 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 70 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W03293/HS-12 is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W03293/HS-12 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements. |
| 2,684 | |
| PE3W03271-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 12 inches. 7/16 DIN Male to N Male Low Loss Cable 12 Inch Length Using LMR-400-UF Coax., Radio frequency assembly 7/16 DIN male to N male low loss cable 12 inch length using LMR-400-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 7/16 DIN male to N male low loss cable 12 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and N type cable connection on the other. Our low loss 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to type N cable is a male to male coax assembly, PE3W03271-12, can also be known as a low loss 7/16 DIN plug to type N plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to N type plug cable assembly PE3W03271-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03271-12 can also be used in the other direction and will be type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to N male low loss cable 12 inch length using LMR-400-UF coax. |
| 52 | ||
| PE3W03271-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 60 inches. 7/16 DIN Male to N Male Low Loss Cable 60 Inch Length Using LMR-400-UF Coax., Radio frequency assembly 7/16 DIN male to N male low loss cable 60 inch length using LMR-400-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 7/16 DIN male to N male low loss cable 60 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low loss 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to type N cable is a male to male coax assembly, PE3W03271-60, can also be known as a low loss 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3W03271-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03271-60 can also be used in the other direction and will be N type male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to N male low loss cable 60 inch length using LMR-400-UF coax. |
| 52 | ||
| PE3W03256 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. QMA Male to SMA Male Right Angle Cable Using RG142 Coax., Radio frequency assembly QMA male to SMA male right angle cable using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male to SMA male right angle cable using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QMA cable connection on one end and right angle SMA cable connection on the other. Our QMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to SMA cable is a male to male coax assembly, PE3W03256, can also be known as a QMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to SMA plug cable assembly PE3W03256 is built with RG142 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with QMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency QMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03256 can also be used in the other direction and will be right angle SMA male to QMA male cable assembly if the opposite connectivity is required. QMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to SMA male right angle cable using RG142 coax. | 0 | |||
| PE3W03292/HS | Pasternack Enterprises | 0 | ||||
| PE3W03238LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to MCX Plug Right Angle Cable 24 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to MCX plug right angle cable 24 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug right angle cable 24 inch length using RG316 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle MCX cable connection on the other. Our SMA to right angle MCX cable assemblies have a male gender on end 1 and plug on end 2. PE3W03238LF/HS-24 can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MCX male cable assembly PE3W03238LF/HS-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03238LF/HS-24 can also be used in the other direction and will be right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MCX plug right angle cable 24 inch length using RG316 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W03255 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using PE-SR405FLJ Coax. PE3W03255 is a SMA male to SMA female bulkhead cable using PE-SR405FLJ coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W03255 SMA male to SMA female bulkhead cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3W03240 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm. 2.92mm Male to 2.92mm Male Cable Using PE-SR047AL Coax. PE3W03240 is a 2.92mm male to 2.92mm male cable using PE-SR047AL coax. This Pasternack 2.92mm male to 2.92mm male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 2.92mm for connector 2. Our male 2.92mm to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W03240 2.92mm male to 2.92mm male cable assembly is constructed with PE-SR047AL coax. | 0 | |||
| PE3W03277/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. TNC Male to N Female Cable Using LMR-600-DB Coax with HeatShrink. PE3W03277/HS is a TNC male to N female cable using LMR-600-DB coax. This Pasternack TNC male to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03277/HS TNC male to N female cable assembly is constructed with LMR-600-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03221 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. N Male to N Female 4 Hole Flange Cable Using RG214 Coax. PE3W03221 is a N male to N female 4 hole flange cable using RG214 coax. This Pasternack N male to N female 4 hole flange cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03221 N male to N female 4 hole flange cable assembly is constructed with RG214 coax. | 0 | |||
| PE3W03238-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to MCX Plug Right Angle Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to MCX plug right angle cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug right angle cable 12 inch length using RG316 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle MCX cable connection on the other. Our SMA to right angle MCX cable assemblies have a male gender on end 1 and plug on end 2. PE3W03238-12 can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MCX male cable assembly PE3W03238-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03238-12 can also be used in the other direction and will be right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MCX plug right angle cable 12 inch length using RG316 coax. |
| 0 | ||
| PE3W03238LF/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Male to MCX Plug Right Angle Cable 72 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to MCX plug right angle cable 72 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug right angle cable 72 inch length using RG316 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle MCX cable connection on the other. Our SMA to right angle MCX cable assemblies have a male gender on end 1 and plug on end 2. PE3W03238LF/HS-72 can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MCX male cable assembly PE3W03238LF/HS-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03238LF/HS-72 can also be used in the other direction and will be right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MCX plug right angle cable 72 inch length using RG316 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W03244LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 24 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 24 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 24 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-24 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-24 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W03258 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Male Cable Using LMR-400-UF Coax. PE3W03258 is a 7/16 DIN male to N male cable using LMR-400-UF coax. This Pasternack 7/16 DIN male to N male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm N for connector 2. Our male 7/16 DIN to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03258 7/16 DIN male to N male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03264/SP-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male Right Angle to MCX Plug Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to MCX plug right angle low loss cable 200 cm length using LMR-100 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MCX plug right angle low loss cable 200 cm length using LMR-100 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MCX cable connection on the other. Our low loss right angle SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W03264/SP-200CM can also be known as a low loss right angle SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03264/SP-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MCX male cable assembly PE3W03264/SP-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03264/SP-200CM can also be used in the other direction and will be a right angle MCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Vyrian | M58LW032D90N1P | STMicroelectronics | 3,750 | |||
M58LW032A110ZA6T![]() | STMicroelectronics | RoHS : Not Compliant | 3,550 | |||
M58LW032A110N6T![]() | STMicroelectronics | RoHS : Not Compliant | 3,400 | |||
M58LW032D90ZA6T![]() | STMicroelectronics | RoHS : Not Compliant | 3,200 | |||
M58LW032C110N6F![]() | STMicroelectronics | RoHS : Compliant | 2,500 | |||
M58LW032C90ZA1F![]() | STMicroelectronics | RoHS : Compliant | 2,350 | |||
M58LW032D90N1E![]() | STMicroelectronics | RoHS : Compliant | 1,950 | |||
| M58LW032D110N6PE | STMicroelectronics | 1,800 | ||||
M58LW032C90N1F![]() | STMicroelectronics | RoHS : Compliant | 1,650 | |||
M58BW032BT45ZA3T![]() | STMicroelectronics | 540 | ||||
| M58LW032A90ZA1T | Micron Technology Inc | 490 | ||||
M58BW032DB45ZA3T![]() | STMicroelectronics | 490 | ||||
M58BW032DB60T3T![]() | STMicroelectronics | 400 | ||||
| M58BW032DT60T6 | STMicroelectronics | RoHS : Unknown | 300 | |||
M58BW032DT60T6T![]() | STMicroelectronics | 300 | ||||
![]() Win Source Electronics | FEMDMW032G-88A19 | FORESEE | 32GB eMMC 5.1 FBGA-153(11.5x13) Memory (ICs) RoHS |
| 1,520 | |
| FEMDRW032G-88A19 | Lexar | 32GB EMMC TLC 5.1 -40C+85C INDW |
| 1,520 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |