| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
S26G-ABS-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Newark | MTSW-102-08-S-S-265 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 2Pos; |Samtec, Inc. MTSW-102-08-S-S-265 RoHS : Compliant |
| 2,793 | |
| MTLW-101-07-L-S-260 | Samtec Inc | Pin Header, Board-To-Board, 1 Rows; |Samtec, Inc. MTLW-101-07-L-S-260 RoHS : Compliant |
| 2,591 | ||
| MTSW-103-24-L-S-263 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 3Pos; |Samtec, Inc. MTSW-103-24-L-S-263 RoHS : Compliant |
| 2,197 | ||
| MTSW-106-08-L-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 6Pos; |Samtec, Inc. MTSW-106-08-L-S-260 RoHS : Compliant |
| 1,328 | ||
| 10090770-S264ALF | Amphenol Communications Solutions | High Density D Sub, Receptacle, 26 Position; D Sub Connector Type:High Density; Gender:Receptacle; Product Range:Fci 10090770 Series; No. Of Contacts:26Contacts; D Sub Shell Size:Da; Contact Termination Type:Solder Cup Rohs Compliant: Yes RoHS : Compliant |
| 1,196 | ||
| TW-03-03-T-S-260-060 | Samtec Inc | Conn Stack Brd, 2Mm, 3Pos, Hdr; |Samtec, Inc. TW-03-03-T-S-260-060 RoHS : Compliant |
| 974 | ||
| MTSW-109-22-T-S-265 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 9Pos; |Samtec, Inc. MTSW-109-22-T-S-265 RoHS : Compliant |
| 888 | ||
| MTSW-106-22-L-S-260-RA | Samtec Inc | Pin Header, Mtsw-106-22-L-S-260-Ra; |Samtec, Inc. MTSW-106-22-L-S-260-RA RoHS : Compliant |
| 778 | ||
| MTMM-107-11-G-S-268 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 7Pos; |Samtec, Inc. MTMM-107-11-G-S-268 RoHS : Compliant |
| 759 | ||
| MTMM-108-10-T-S-265 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 8Pos; |Samtec, Inc. MTMM-108-10-T-S-265 RoHS : Compliant |
| 660 | ||
| QT161S-26.000MAHB-T | TXC Corporation | Xtal, 26Mhz, 6Pf, Smd, 1.6Mm X 1.2Mm; |Txc QT161S-26.000MAHB-T RoHS : Compliant |
| 500 | ||
| QT161S-26.000MAHB-T | TXC Corporation | Xtal, 26Mhz, 6Pf, Smd, 1.6Mm X 1.2Mm; |Txc QT161S-26.000MAHB-T RoHS : Compliant |
| 500 | ||
| ZW-14-15-T-S-265-240 | Samtec Inc | Conn Stack Brd, 2.54Mm, 14Pos, Hdr; |Samtec, Inc. ZW-14-15-T-S-265-240 RoHS : Compliant |
| 161 | ||
| MTSW-136-08-S-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 36Pos; |Samtec, Inc. MTSW-136-08-S-S-260 RoHS : Compliant |
| 143 | ||
| 1TVS151800S2623 | ABB Low Voltage Products and Systems | Vertical Split Load Brd, 250A, 12+12Way; |Abb 1TVS151800S2623 RoHS : Not Compliant |
| 2 | ||
![]() Analog Devices Inc | MAX6315US26D1+T | Analog Devices Inc | Open-Drain SOT µP Reset Circui RoHS : Compliant |
| 76,354 | |
| MAX6390XS26D4+T | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant |
| 37,500 | ||
| MAX6314US26D4+T | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant |
| 27,500 | ||
| MAX6314US26D2+T | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant |
| 13,254 | ||
| MAX6314US26D3+T | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant |
| 12,757 | ||
| MAX6805US26D3+T | Analog Devices Inc | 4-Pin, Low-Power µP Reset Circ RoHS : Compliant |
| 10,000 | ||
| MAX6387XS26D3+T | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant | 7,500 | |||
| MAX6386XS26D2+T | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant |
| 5,420 | ||
| MAX6805US26D3+ | Analog Devices Inc | 4-Pin, Low-Power µP Reset Circ RoHS : Compliant | 3,861 | |||
| MAX6315US26D3+ | Analog Devices Inc | Open-Drain SOT µP Reset Circui RoHS : Compliant | 1,081 | |||
| MAX6390XS26D4+ | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant | 0 | |||
| MAX6315US26D1+ | Analog Devices Inc | Open-Drain SOT µP Reset Circui RoHS : Compliant | 0 | |||
| MAX6421XS26+ | Analog Devices Inc | Low-Power, SC70/SOT µP Reset C RoHS : Compliant | 0 | |||
| MAX6386XS26D2+ | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant | 0 | |||
| MAX6423US26+ | Analog Devices Inc | Low-Power, SC70/SOT µP Reset C RoHS : Compliant | 0 | |||
![]() RS | DLCBS2-6-01 | Essentra Components | SPACER; DUAL LOCK; NATURAL; 3/8 IN |
| 151 | |
| BNS260-02Z-ST-R (101184361) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS, RIGHT HAND DOOR, INTGRTD CONNECTO |
| 39 | ||
| VS26S517DF213A | Norgren | VALVE, 5/2, SOL/SPR RTNL, 24VDC, LOCK, SOFT SEAL SPOOL |
| 23 | ||
| PS2/6/16BP | ABB Low Voltage Products and Systems | BUSBAR, 2-PHASE, 6-POLE, 80A, FOR S200U& S200UP |
| 14 | ||
| VS26S517DF318A | Norgren | E-VALVE 5/2 SOL-SPR INT 115VAC |
| 9 | ||
| 2AS2-6 | Altech Corporation | 3 POSITIONS METAL PUSH BUTTON 22.5MM STRAIGHT SPRING RETURN TO CENTRE |
| 4 | ||
| XS26-2 | Banner Engineering Corp | SAFETY CONTROLLER, EXPANDABLE, 2 SAFETYPAIRS OUT/UP TO 26 INPUTS, 24VDC |
| 4 | ||
| CLS26-SMSM-04.00F | Amphenol Times Microwave Systems | TEST CABLE, ARMORED, 26 GHZ MA, MALE-S MA MALE, 4FT, CLARITY SERIES |
| 3 | ||
| DS26FK | Eaton Cutler-Hammer | SAFETY SWITCH ACCESS/R FUSE CLIP KIT 60A DH-DT/3P 600V |
| 2 | ||
| MJS2-60B | ABB Low Voltage Products and Systems | JS 2-POS MOM |
| 2 | ||
| BOS0089 (BOS 26K-PA-1HC-S4-C) | Balluff Inc | SENSOR, PHOTOELECTRIC DIFFUSE BGS, BLOCK, RED LIGHT, 300MM, PNP, LO/DO, M12 |
| 2 | ||
| MIKE2A/3M/LL2/SMAM/S/S/26 (1408049) | Siretta Ltd | ANTENNA, MIKE2A GSM/3G WHIP ANTENNA 3M SMA-M |
| 2 | ||
| BHS0030 (BES 516-300-S260-S4-D) | Balluff Inc | PROXIMITY SENSOR, BES 516-300-S260-S4-D |
| 1 | ||
| MIKE2A/3M/SMAM/S/S/26 (8968308) | Siretta Ltd | ANTENNA, WHIP QUAD BAND GSM/GPRS AND 3G MAGNETIC MOUNT ANTENNA, SMA MALE, 3M |
| 1 | ||
| 0803929 (MM-WMS-2 6 4 (EX10)R C1 WH/BK) | Phoenix Contact | MM-WMS-2 6 4 (EX10)R C1 WH/BK THERMOFOX SERIES |
| 1 | ||
![]() STMicroelectronics | STS26N3LLH6![]() | STMicroelectronics | N-channel 30 V, 0.0038 Ohm, 26 A, SO-8 STripFET(TM) VI DeepGATE(TM) Power MOSFET RoHS : Compliant |
| 78 | |
![]() Microchip Technology Inc | MCP6S26-I/SL![]() | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, SOIC, Projected EOL: 2036-04-04 RoHS : Compliant |
| 52,175 | |
MCP6S26-I/P![]() | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, PDIP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 5,134 | ||
MCP6S26T-I/ST![]() | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, TSSOP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 2,500 | ||
MCP6S26-I/ST![]() | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, TSSOP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 1,994 | ||
MCP6S26T-I/SL![]() | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, SOIC, Projected EOL: 2036-04-04 RoHS : Compliant |
| 1,990 | ||
| UES2603 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 861 | ||
| UES2605HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 284 | ||
| UES2606HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 242 | ||
| UES2606 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 79 | ||
| UES2602 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 17 | ||
| TFS265 | Microchip Technology Inc | TFS265, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| UES2604 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS2657 | Microchip Technology Inc | TFS2657, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| TFS261B | Microchip Technology Inc | TFS261B, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| UES2604HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
![]() Sager | MTLW-101-07-L-S-260 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 2,591 | |
| MTLW-114-07-L-S-260 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 221 | ||
| 55PC0236-24-9/93/96CS2666 | TE Connectivity | TE Connectivity | 0 | |||
| 55PC025A-26-MST5CS2666 | TE Connectivity | TE Connectivity | 0 | |||
| 55PC212A-26-9/96-9CS2666 | TE Connectivity | TE Connectivity 55PC212A-26-9/96-9CS2666 | 0 | |||
| ATS-HP-F6L150S26W-241 | Advanced Thermal Solutions Inc | Liquid Cold Plates, Liquid Cooling & Heat Pipes Heat Pipe, Copper, High Performance, Flat, 150x8.6x2mm |
| 0 | ||
| AP-GT13-30/1.6-2.9S-2(64) | Hirose Electric Co Ltd | Bench Top Tools AUTO CRMP APP TOOL GT13 SER | 0 | |||
| MTC100-JA1-P11-T05CS2684 | TE Connectivity | Rack & Panel Connectors | 0 | |||
| MTLW-136-08-G-S-260 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| NRAS2600-15A-BAM-100V | IDEC Corporation | Circuit Breakers No Replacement | 0 | |||
| CS2660-9ERG | Bel Power Solutions | POWER SUPPLY;;DC-DC CONVERTER;;;;;;IND RUGED CASSETTE;;;;;; |
| 0 | ||
| IDMS-26-D-99.99-T | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSS-26-S-12.00-T-ST8 | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Single-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HCSD-08-S-26.00-01-T | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HCSS-26-S-03.00-01-T | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
![]() Coilcraft Direct | 0805CS-261XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | |
| 0805CS-261XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008HS-261TJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() Interstate Connecting Components | 55A0812-8-96CS2654 | TE Connectivity | 55A0812-8-96CS2654 RoHS : Compliant | 0 | ||
| 55FB1531-20-FLT3-0CS26 | TE Connectivity | 55FB1531-20-FLT3-0CS2636 | 0 | |||
| 55PC0211-24-9CS2600 | TE Connectivity | 55PC0211-24-9CS2600 | 0 | |||
| 55PC0214-20-9CS2614 | TE Connectivity | 55PC0214-20-9CS2614 RoHS : Compliant | 0 | |||
| 55PC0231-12-3/6/9CS260 | TE Connectivity | 55PC0231-12-3/6/9CS2602 | 0 | |||
| ATBS-263-0405 | Amphenol Sine Systems | Backshell, AT, 4 way, 180 degr strain relief,fits AT06-4S |
| 0 | ||
| MJS-26PL79 | ITT Interconnect Solutions | MJS-26PL79 | 0 | |||
| YDTS26F09-35ACV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F09-35SNV002 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F11-05BBV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F13-04ADV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F13-35ABV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F15-05ACV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F15-35SDV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
| YDTS26F17-06ABV001 | TE Connectivity | PLUG ASSY RoHS : Compliant | 0 | |||
![]() Powell Electronics | 55A0812-8-96CS2654 | TE Connectivity | Connectors RoHS : Compliant |
| 9,059 | |
| 55FB1544-24-FLT4-0CS2636 | TE Connectivity | Connectors |
| 2,451 | ||
| MTLW-101-07-L-S-260 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 1,710 | ||
| MTSW-103-24-L-S-263 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 1,450 | ||
| 55PC0214-20-9CS2614 | TE Connectivity | Connectors RoHS : Compliant |
| 1,205 | ||
| TW-03-09-T-S-260-040 | Samtec Inc | Cable Assembly, Wire-to-Board, Through-H RoHS : Compliant |
| 643 | ||
| MTSW-109-22-T-S-265 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 586 | ||
| MTMM-108-10-T-S-265 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 436 | ||
| MTLW-114-07-L-S-260 | Samtec Inc | .100 Mini Mate Universal Single Row Disc RoHS : Compliant |
| 146 | ||
| 10090770-S264ALF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 128 | ||
| ZW-14-15-T-S-265-240 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 106 | ||
| YDTS26W09-98PAV001 | TE Connectivity | PLUG ASSY RoHS : Compliant |
| 30 | ||
| YDTS26F17-35SNV001 | TE Connectivity | PLUG ASSY RoHS : Compliant |
| 24 | ||
| YDTS26W11-99PNV001 | TE Connectivity | PLUG ASSY RoHS : Compliant |
| 13 | ||
| YDTS26W21-16PNV001 | TE Connectivity | PLUG ASSY RoHS : Compliant |
| 2 | ||
![]() PUI | SS26-HF | 25,000 | ||||
| 2211-1X06G00S/2.6/2.8B | 1,113 | |||||
| 2211-1X04G00S-2.6-2.8B | 499 | |||||
| 2211-2X40G00S-2.6-2.8B | 333 | |||||
| 2211-1X01G00S-2.6-2.8 | 200 | |||||
| 2011-2X03G00S-2.6-10.9B-I | 200 | |||||
| 2211-1X09G00S-2.6-2.8B | 153 | |||||
| 2211-1X07G00S/2.6/2.8B | 34 | |||||
![]() Chip 1 Exchange | LS-S260-DO | OSRAM GmbH | INSTOCK | 66,000 | ||
MAX6390XS26D7+T![]() | Maxim Integrated Products | INSTOCK RoHS : Compliant | 17,350 | |||
MAX6315US26D3+![]() | Maxim Integrated Products | INSTOCK RoHS : Compliant | 5,880 | |||
| STIFTWANNE MKS 2651 | STOCK | INSTOCK | 3,249 | |||
| LGS260-D0 | OSRAM GmbH | INSTOCK | 3,000 | |||
| S269B0 | Siemens | INSTOCK | 2,194 | |||
| NTS260ESFT1G | onsemi | INSTOCK RoHS : Compliant | 1,500 | |||
| MKS2662-6-0-1212 | INSTOCK | 696 | ||||
| DS26LV31TMX | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 630 | |||
| 74LS26LYOP | Texas Instruments | INSTOCK | 495 | |||
| S269B0 | INSTOCK | 250 | ||||
| DS26C32ATN | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 202 | |||
| DS26C31TM | INSTOCK | 114 | ||||
| DM54LS260J/883QS | INSTOCK | 6 | ||||
| DM54LS2603J/883QS | INSTOCK | 2 | ||||
![]() Avnet Asia | PB5615-S26 | PanJit Semiconductor | (Alt: PB5615-S26) RoHS : Compliant |
| 3,000 | |
| SDCS2/64GBSP | Kingston Technology Company | 64GBSP (Alt: SDCS2/64GBSP) RoHS : Compliant | 0 | |||
PTVS26VS1UR,115![]() | Nexperia | TVS Diode, PTVSxS1UR Series, Unidirectional, 26 V, 42.1 V, SOD-123, 2 Pins (Alt: PTVS26VS1UR,115) RoHS : Compliant |
| 0 | ||
PTVS26VU1UPAZ![]() | Nexperia | TVS Diode, PTVSxU1UPA Series, Unidirectional, 26 V, 43.5 V, DFN2020, 3 Pins (Alt: PTVS26VU1UPAZ) RoHS : Compliant | 0 | |||
| SS26SHE3_B/I | Vishay Intertechnologies | (Alt: SS26SHE3_B/I) RoHS : Compliant | 0 | |||
| SISS26LDN-T1-GE3 | Vishay Intertechnologies | (Alt: SISS26LDN-T1-GE3) RoHS : Compliant | 0 | |||
| MURS260T3G | onsemi | (Alt: MURS260T3G) RoHS : Compliant | 0 | |||
| SS26T3G | onsemi | (Alt: SS26T3G) RoHS : Compliant |
| 0 | ||
| NRVBS260NT3G | onsemi | (Alt: NRVBS260NT3G) RoHS : Compliant | 0 | |||
| SS26 | Taiwan Semiconductor | (Alt: SS26) RoHS : Compliant | 0 | |||
| SS26-E3/52T | Vishay Intertechnologies | Schottky Rectifier, SS Series, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 700 mV (Alt: SS26-E3/52T) RoHS : Compliant | 0 | |||
| SS26SHE3_B/H | Vishay Intertechnologies | Diode Schottky 60V 2A 2-Pin DO-214AC T/R (Alt: SS26SHE3_B/H) RoHS : Compliant | 0 | |||
| FDMS2672 | onsemi | N-Channel UltraFET Trench? MOSFET 200V, 20A, 77mO (Alt: FDMS2672) RoHS : Compliant | 0 | |||
| FDS2672 | onsemi | (Alt: FDS2672) RoHS : Compliant | 0 | |||
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 0 | |||
![]() DB Roberts | 2034-080-SS-26 | RAF Electronic Hardware | 0 | |||
| 2234-1024-S-26 | RAF Electronic Hardware | 0 | ||||
| 0211-SS-26 | RAF Electronic Hardware | 0 | ||||
| 0616-SS-26 | RAF Electronic Hardware | 0 | ||||
| 0208-S-26 | RAF Electronic Hardware | 0 | ||||
| 1018-125-SS-26 | RAF Electronic Hardware | 0 | ||||
| 0421-SS-26 | RAF Electronic Hardware | 0 | ||||
| 0445-SS-26 | RAF Electronic Hardware | 0 | ||||
| N1D82X042130S262 | Avdel | WITH GLEITMO 605 LUB CORE HARD | 0 | |||
| M0275-SS-26 | RAF Electronic Hardware | 0 | ||||
| 0817-SS-26 | RAF Electronic Hardware | BLACK OXIDE STAINLESS STEEL | 0 | |||
| 0818-S-26 | RAF Electronic Hardware | 0 | ||||
| M0351-SS-26 | RAF Electronic Hardware | 0 | ||||
| 8225-1032-SS-26 | RAF Electronic Hardware | 0 | ||||
| 0887-S-26 | RAF Electronic Hardware | 0 | ||||
![]() Flip Electronics | NTS260SFT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,231,645 | |
| S26HS512TGABHI003 | Cypress Semiconductor | Stock RoHS : Compliant | 18,733 | |||
| S26HS512TGABHA000 | Cypress Semiconductor | Stock | 18,733 | |||
S26KL512SDABHM030![]() | Cypress Semiconductor | Stock RoHS : Compliant | 2,650 | |||
| S26KL512SDABHN030 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 2,650 | ||
| S26HS01GTFPBHI023 | Infineon Technologies AG | Stock RoHS : Compliant | 2,500 | |||
| S26KS128SDABHI030 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant |
| 1,060 | ||
| S26KS128SDGBHV030 | Cypress Semiconductor | Stock RoHS : Compliant | 1,009 | |||
| S26KL128SDABHN033 | Cypress Semiconductor | Stock | 980 | |||
| S26KL128SDABHI021 | Cypress Semiconductor | Stock | 967 | |||
| S26KL128SDABHN020 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 967 | ||
| S26KS128SDGBHN033 | Cypress Semiconductor | Stock | 752 | |||
| S26HL512TFPBHI010 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 676 | ||
| MFS2603AMDA0AD | NXP Semiconductors | Stock | 500 | |||
| S26KS512SDGBHV030 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 257 | ||
![]() Maritex | FPV160808S260PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0603; 26VDC; 25pF RoHS : Compliant |
| 3,860 | |
| TGS2610-C00 | FIGARO Engineering Inc | MOS-type propane, butane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW |
| 2,454 | ||
| SS26FL | onsemi | Rectifier Diodes & Bridges; SS26FL; ON SEMICONDUCTOR; 2 A; 60 V RoHS : Compliant |
| 2,374 | ||
| TGS2611-C00 | FIGARO Engineering Inc | MOS-type methane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW |
| 1,491 | ||
| TGS2610-D00 | FIGARO Engineering Inc | MOS-type propane, butane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW; filter built-in |
| 995 | ||
| PBMS26S-CT | CONNTHERM | Pin Header; pitch 2.00mm; 1x26 pins; assembly: THT; female; straight; single row |
| 901 | ||
| SM24W3S26 | SOURIAU-SUNBANK | Male terminal; current 5A; for AWG26-24 RoHS : Compliant |
| 450 | ||
| TGS2611-E00 | FIGARO Engineering Inc | MOS-type methane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW; filter built-in |
| 326 | ||
| SS26T3G | onsemi | Rectifier Diodes & Bridges; SS26T3G; ON SEMICONDUCTOR; 2; 2 A; 60 V; 200 �A RoHS : Compliant |
| 129 | ||
| TGS2612 | FIGARO Engineering Inc | MOS-Type methane, propane, butane gas sensor; range: 1-25%LEL; support: 5V; power: 280mW; filter built-in |
| 81 | ||
| TGS2600 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm H2; supply: 5V; power: 210mW |
| 62 | ||
| TGS2603 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-10ppm C2H5OH; supply: 5V; power: 240 mW |
| 42 | ||
| TGS2602 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm C2H5OH; supply: 5V; power: 280mW |
| 34 | ||
| NS-26CW108-XHEQ38A2 | NiViss | MCPCB module; aluminium 5052; circle 108mm; 26 x XPEHEW-L1-00BE8; warm white; Q3; 8A2; cable red; blue 25cm; RoHS |
| 6 | ||
SN74LS266D![]() | Texas Instruments | Logic Gates; SN74LS266D; TEXAS INSTRUMENTS; 14; NOR, XNOR; 5.25 V; 4.75 V RoHS : Compliant |
| 2 | ||
![]() Master Electronics | AT-S-26-6/6/S-25![]() | ASSMANN WSW components GmbH | MODULAR CABLE RoHS : Compliant |
| 100 | |
| IDSS-26-S-26.63 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 55A0812-8-96CS2654 | TE Connectivity | High Performance Cable Single RoHS : Compliant |
| 0 | ||
| 55A6502-22-9/96-9CS2621 | TE Connectivity | 55A6502-22-9/96-9CS2621 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55A7226-20-3/6/9-9CS2628 | TE Connectivity | 55A7226-20-3/6/9-9CS2628 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55A7227-12-MSL4-9CS2628 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part RYC55A7227-12-MSL4-9CS262 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55FB1544-24-FLT4-0CS2636 | TE Connectivity | 55Fb1544-24-Flt4-0Cs2636 |Raychem Te Connectivity 55FB1544-24-FLT4-0CS2636 RoHS : Not Compliant |
| 0 | ||
| 55PC0211-24-9CS2600 | TE Connectivity | High Performance Cable 1Conductors 24AWG Tin Plated Copper White 600Vac MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55PC0212-22-9CS2603 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55PC0214-20-9CS2614 | TE Connectivity | High Performance Cable 1Conductors 20 Silver Coated High Strength Copper Alloy White 600V RoHS : Compliant |
| 0 | ||
| 55PC212A-26-9/96-9CS2666 | TE Connectivity | 55PC212A-26-9/96-9CS2666 MOQ Reduction RoHS : Compliant |
| 0 | ||
| MTLW-101-07-L-S-260 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-103-07-T-S-268 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-106-07-L-S-265 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-114-07-L-S-260 | Samtec Inc | .100 LOW PROFILE VARIAB RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2346/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2346/HS2-60 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2346/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2346/HS2-60 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink. |
| 4,213 | |
| PE3C1135/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1135/HS2-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1135/HS2-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink. |
| 2,106 | ||
| PE3C0053/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-240 Coax with Double Heatshrink., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0053/HS2-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0053/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink. |
| 2,009 | ||
| PE3C3196/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Female to N Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a female gender on end 1 and male on end 2. PE3C3196/HS2-60 can also be known as a low loss SMA jack to N type plug cable assembly and will be shipped same-day as it is purchased. SMA jack to type N plug cable assembly PE3C3196/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3196/HS2-60 can also be used in the other direction and will be N type male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 790 | ||
| PE3C6334/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C6334/HS2-60 can also be known as a low loss right angle N type plug to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF plug cable assembly PE3C6334/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency N type right angle male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6334/HS2-60 can also be used in the other direction and will be UHF male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 254 | ||
| PE3C0108/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to N Female Bulkhead Cable 12 Inch Length Using LMR-240 Coax with Double HeatShrink., Radio frequency assembly TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and N type bulkhead cable connection on the other. Our TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly, PE3C0108/HS2-60, can also be known as a TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to N type jack cable assembly PE3C0108/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0108/HS2-60 can also be used in the other direction and will be type N female bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink. |
| 240 | ||
| PE3W06854/HS2-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 60 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854/HS2-60, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854/HS2-60 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink. |
| 114 | ||
| PE3C0051/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-60 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE3W00029/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-400 Coax with Double HeatShrink., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our low loss N type to type N cable assemblies have a female gender on end 1 and female on end 2. PE3W00029/HS2-60 can also be known as a low loss N type jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3W00029/HS2-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N female bulkhead to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink. |
| 0 | ||
| PE345/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE345/HS2-60 can also be known as a low loss type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE345/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE345/HS2-60 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE3C1527/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. BNC Male to BNC Male Cable 6 Inch Length Using RG316-DS Coax with Double HeatShrink., Radio frequency assembly BNC male to BNC male cable 6 inch length using RG316-DS coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC male cable 6 inch length using RG316-DS coax with double heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1527/HS2-6 can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C1527/HS2-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 6 inch length using RG316-DS coax with double heatshrink. |
| 0 | ||
| PE3C7527/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Female Right Angle to SMA Female Bulkhead Cable 6 Inch Length Using PE-P086 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA female bulkhead cable 6 inch length using PE-P086 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female right angle to SMA female bulkhead cable 6 inch length using PE-P086 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and a SMA bulkhead cable connection on the other. Our right angle mini SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3C7527/HS2-6 can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7527/HS2-6 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our right angle Mini SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. Mini SMP jack to SMA jack cable assembly PE3C7527/HS2-6 is built with PE-P086 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7527/HS2-6 can also be used in the other direction and will be a SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W12598/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMC, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMC Plug to SMB Plug Right Angle Cable 6 Inch Length Using RG178 Coax with Double HeatShrink., Radio frequency assembly SMC plug to SMB plug right angle cable 6 inch length using RG178 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMC plug to SMB plug right angle cable 6 inch length using RG178 coax with double heatshrink, SMC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and right angle SMB cable connection on the other. Our SMC to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. PE3W12598/HS2-6 can also be known as a SMC male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMC male to SMB male cable assembly PE3W12598/HS2-6 is built with RG178 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMC plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12598/HS2-6 can also be used in the other direction and will be right angle SMB plug to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMB cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMB plug right angle cable 6 inch length using RG178 coax with double heatshrink. |
| 0 | ||
| PE35568/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMB Jack Cable 6 Inch Length Using RG316-DS Coax with Double HeatShrink., Radio frequency assembly SMA male to SMB jack cable 6 inch length using RG316-DS coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack cable 6 inch length using RG316-DS coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assembly has male gender on end 1 and jack on end 2. PE35568/HS2-6 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMB female cable assembly PE35568/HS2-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE35568/HS2-6 RF cable are available on our downloadable PDF datasheet.PE35568/HS2-6 can also be used in the other direction and will be SMB jack to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1609/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMB Plug to SMA Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C1609/HS2-60 can also be known as a low loss SMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SMA plug cable assembly PE3C1609/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1609/HS2-60 can also be used in the other direction and will be SMA male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
![]() Teledyne HiRel | DM54LS260E/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | ||
| DM54LS260J/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |