| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
S260R-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | L225S260F11LDK | Lucki | CRYSTAL26.000MHZ 9pF SMD 2520 |
| 50,000 | |
| L214S260C313LDK | Lucki | Crystal 26MHZ 7.3PF 10PPM |
| 50,000 | ||
| QT252S-26.000MAAV-T | QST Corporation | 2.5X2.0 SEAM SEAL MHZXTAL -4PAD |
| 3,000 | ||
| S260 | Switchcraft Conxall | CONN PLUG STEREO 5.23MM 3COND RoHS : Compliant |
| 650 | ||
| ECS-260-10-36B-CKM-TR | ECS International Inc | CRYSTAL 26.000 MHZ 10PF SMD |
| 648 | ||
| ECS-260-10-36B-CKM-TR | ECS International Inc | CRYSTAL 26.000 MHZ 10PF SMD |
| 648 | ||
| ECS-260-10-36B-CKM-TR | ECS International Inc | CRYSTAL 26.000 MHZ 10PF SMD |
| 648 | ||
| QT216S-26.000MEEV-T | QST Corporation | 2.0X1.6 10/10PPM -20~70C 8PF |
| 378 | ||
| QT216S-26.000MEEV-T | QST Corporation | 2.0X1.6 10/10PPM -20~70C 8PF |
| 378 | ||
| QT216S-26.000MDII-T | FTS | 2.0x1.6 XTAL 20ppm 20ppm 16pF |
| 25 | ||
| 094M30LS-26.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 050200LS-26.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 055157LS-26.00-S | Helix Linear Technologies | Trapezoidal Screw |
| 10 | ||
| RD013315RS-26.00-T | Helix Linear Technologies | Rounded Acme Screw |
| 10 | ||
| RD014020LS-26.00-T | Helix Linear Technologies | Rounded Acme Screw |
| 10 | ||
![]() Avnet Americas | MBRS260T3G | onsemi | Schottky Rectifier, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 630 mV - Tape and Reel (Alt: MBRS260T3G) RoHS : Compliant |
| 1,237,500 | |
| MURS260-E3/5BT | Vishay Intertechnologies | 2A, 600V, 50NS, SMB UF RECT. SMD - Tape and Reel (Alt: MURS260-E3/5BT) RoHS : Compliant |
| 12,800 | ||
| MURS260T3G | onsemi | Power Rectifier, Ultra-Fast Recovery, 2 A, 600 V - Tape and Reel (Alt: MURS260T3G) RoHS : Compliant |
| 7,500 | ||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal, Surface Mount, 6 MHz, SMD, 11.4mm x 4.7mm, 30 ppm, 18 pF, 30 ppm, ABLS2 Series - Tape and Reel (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant |
| 5,000 | ||
| MPZ1608S260ATAH0 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% - Tape and Reel (Alt: MPZ1608S260ATAH0) RoHS : Compliant |
| 4,000 | ||
| ECS-260-8-36-CKY-TR | ECS International Inc | Crystal Fundamental 26MHz 8pF ?10ppm ?10ppm 4-Pin CSMD T/R - Tape and Reel (Alt: ECS-260-8-36-CKY-TR) RoHS : Compliant |
| 1,000 | ||
| ECS-260-10-36-CKM-TR | ECS International Inc | 26MHz 10ppm 10ppm 10pF 60 Ohm Fundamental -20 C ~ 70 C - Surface Mount 4-SMD - Tape and Reel (Alt: ECS-260-10-36-CKM-TR) RoHS : Compliant |
| 0 | ||
| ECS-260-10-36B-CKM-TR | ECS International Inc | 26.000 MHZ 10PF ECX-2236B 10/10 PPM -20 ~ +70C 1 PPM AGING 2520 4-SMD ROHS - Tape and Reel (Alt: ECS-260-10-36B-CKM-TR) RoHS : Compliant |
| 0 | ||
| SW-04-04-T-S-260-180 | Samtec Inc | - Bulk (Alt: SW-04-04-T-S-260-180) RoHS : Compliant |
| 0 | ||
| TW-02-02-L-S-260-SM | Samtec Inc | - Bulk (Alt: TW-02-02-L-S-260-SM) RoHS : Compliant | 0 | |||
| TW-06-02-T-S-260-SM | Samtec Inc | - Bulk (Alt: TW-06-02-T-S-260-SM) RoHS : Compliant | 0 | |||
| 55PC1111-22-9-9CS2606 | TE Connectivity | - Bag (Alt: 182177-000) RoHS : Compliant |
| 0 | ||
| 55PC0211-12-9CS2600 | TE Connectivity | - Bag (Alt: 390627-000) RoHS : Compliant |
| 0 | ||
| SIT1602AC-71-18S-26.000000D | SiTime Corporation | - Tape and Reel (Alt: SIT1602AC-71-18S-26.000000D) RoHS : Compliant |
| 0 | ||
| SIT1602BC-12-YYS-26.000000E | SiTime Corporation | MEMS Crystal Oscillator 26MHz 1.62V to 3.63V 15pF 4-Pin SMD T/R - Tape and Reel (Alt: SIT1602BC-12-YYS-26.000000E) RoHS : Compliant |
| 0 | ||
![]() Newark | MTMM-101-04-T-S-260 | Samtec Inc | PIN HEADER, BOARD-TO-BOARD, 1 ROWS; RoHS : Compliant |
| 2,849 | |
| MTSW-202-08-T-S-260 | Samtec Inc | HDR, BRD-TO-BRD, 5.08MM, 2POS; RoHS : Compliant |
| 1,497 | ||
| MTMM-105-07-S-S-260 | Samtec Inc | HDR, BRD-TO-BRD, 2MM, 5POS; RoHS : Compliant |
| 1,039 | ||
| ECS-260-10-36B-CKM-TR | ECS International Inc | CRYSTAL, 26MHZ, 10PF, SMD, 2.5MM X 2MM; RoHS : Not Compliant |
| 995 | ||
| ECS-260-10-36B-CKM-TR | ECS International Inc | CRYSTAL, 26MHZ, 10PF, SMD, 2.5MM X 2MM; RoHS : Not Compliant |
| 995 | ||
| MTLW-108-07-T-S-260 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 8POS; RoHS : Compliant |
| 540 | ||
| QT252S-26.000MAAV-T | TXC Corporation | XTAL, 26MHZ, SMD, 2.5MM X 2MM, 30PPM; RoHS : Compliant |
| 500 | ||
| QT252S-26.000MAHE-T | TXC Corporation | XTAL, 26MHZ, SMD, 2.5MM X 2MM, 30PPM; RoHS : Compliant |
| 500 | ||
| DW-01-17-T-S-260 | Samtec Inc | STACKING BOARD CONNECTOR, DW SERIES; RoHS : Compliant |
| 434 | ||
| HMTSW-102-08-G-S-260 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 2POS; RoHS : Compliant |
| 432 | ||
| TW-08-02-T-S-260-060 | Samtec Inc | CONN STACK BRD, 2MM, 8POS, HDR; RoHS : Compliant |
| 351 | ||
| DW-04-08-T-S-260 | Samtec Inc | CONN STACK BRD, 2.54MM, 4POS, HDR; RoHS : Compliant |
| 328 | ||
| DW-08-08-L-S-260 | Samtec Inc | CONN STACK BRD, 2.54MM, 8POS, HDR; RoHS : Compliant |
| 244 | ||
| B82720S2601N040 | TDK Corporation | POWER LINE CHOKE, 0.6A, 4.4MH, SMD; RoHS : Compliant |
| 192 | ||
| DW-50-08-G-S-260 | Samtec Inc | CONN STACK BRD, 2.54MM, 50POS, HDR; RoHS : Compliant |
| 118 | ||
![]() NXP Semiconductors | SFS2600HMBEDAD | NXP Semiconductors | S32K148 for Infotainment Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 745 | |
| SFS2603HMBE6AD | NXP Semiconductors | S32K324 for BMS Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 500 | ||
![]() RS | DLCBS2-6-01 | Essentra Components | SPACER; DUAL LOCK; NATURAL; 3/8 IN |
| 151 | |
| S260 | Switchcraft Conxall | PLUG PHONE 3 SCREW 0.206 2.7 IN. 0.206 IN. RoHS : Compliant |
| 45 | ||
| BNS260-02Z-ST-R (101184361) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS, RIGHT HAND DOOR, INTGRTD CONNECTO |
| 44 | ||
| BNS260-02/01Z-ST-R (101184362) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS,1) NC SIGNALING CONTACT, RT HAND DOO |
| 26 | ||
| BNS260-11Z-ST-L (101184379) | Schmersal | SAFETY SENSOR, CODED MAGNET, 1)NO/1)NC CONTACTS, LEFT HAND DOOR, CONNECTOR |
| 23 | ||
| 3RS26002BW30 | Siemens | TEMPERATURE MONITORING RELAY ;3RS26002BW30 |
| 8 | ||
| M2SS2-60B01 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 1NC MAIN |
| 3 | ||
| 3RS26001BA30 | Siemens | TEMPERATURE MONITORING RELAY, 3RS26001BA30 |
| 3 | ||
| BNS260-02ZG-ST-L (101184381) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS, LED, LEFT HAND DOOR |
| 3 | ||
| BNS260-11/01ZG-ST-L (101184384) | Schmersal | SAFETY SENSOR, CODED MAGNET, 1)NO/1)NC CONTACTS, SIGNALING CONTACT, LED, LH DOOR |
| 3 | ||
| MJS2-60B | ABB Low Voltage Products and Systems | JS 2-POS MOM |
| 2 | ||
| CCP2S-2-60CF | Eaton Bussmann | COMPACT CIRCUIT PROTECTOR;2 POLE;W/SIDE MOUNT MECHANISM RIGHT SIDE;CUBEFORCE;60A |
| 2 | ||
| SM312FPMHS (26071) | Banner Engineering Corp | MINI-BEAM, HIGH SPEED PLASTIC FIBER OPTIC, RANGE, MINI-BEAM SERIES |
| 2 | ||
| BNS260 SPACER PLATE (101184643) | Schmersal | SPACER PLATE, FOR BNS260 CODED MAGNET SAFETY SENSOR |
| 1 | ||
| BHS0030 (BES 516-300-S260-S4-D) | Balluff Inc | PROXIMITY SENSOR, BES 516-300-S260-S4-D |
| 1 | ||
![]() Microchip Technology Inc | UES2603 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 861 | |
| UES2605HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 284 | ||
| UES2606 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 79 | ||
| UES2602 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 17 | ||
| UES2605 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2604 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2601R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2604R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2602R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2603R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2603E3 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2051-09-21 - Contact for Pricing RoHS : Compliant | 0 | |||
| UES2604HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2602HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2606HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2606RHR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | A2T21S260W12NR3 | NXP Semiconductors | Airfast RF Power LDMOS Transistor RoHS : Compliant |
| 1,000 | |
| A2T18S260W12NR3 | NXP Semiconductors | Airfast RF Power LDMOS Transistor RoHS : Compliant |
| 932 | ||
| A2T21S260-12SR3 | NXP Semiconductors | Airfast RF Power LDMOS Transistor 2110-2170 MHz, 65 W Avg., 28 V RoHS : Compliant |
| 36 | ||
| NCP163AFCS260T2G | onsemi | LDO Regulator, 250 mA, Ultra-High PSRR, Ultra-Low Noise 2.6 V, Active Discharge RoHS : Compliant |
| 110,000 | ||
| NRVBS260NT3G | onsemi | Schottky Power Rectifier, Surface Mount, 2.0 A, 60 V, SMB Package RoHS : Not Compliant |
| 64,500 | ||
| MURS260T3G | onsemi | Rectifier Single Standard 600V 2A SMB T/R RoHS : Compliant |
| 2,000 | ||
SN74S260N![]() | Texas Instruments | Logic IC NOR Gate 2 Element 5V 14-DIP Tube RoHS : Not Compliant |
| 17,280 | ||
SN74S260D![]() | Texas Instruments | SN74S260 Dual 5-input positive-NOR gates RoHS : Compliant |
| 18,395 | ||
| BBS2600BPBR | Intel Corporation | Embedded Computer Accessory, Board, Carton |
| 638 | ||
IRS2608DSPBF![]() | International Rectifier | Half Bridge Based Peripheral Driver, 0.35A, CMOS, PDSO8 RoHS : Compliant |
| 7,087 | ||
IRS2609DSPBF![]() | International Rectifier | Half Bridge Based MOSFET Driver, 0.2A, CMOS, PDSO8 RoHS : Compliant |
| 2,908 | ||
| HIP6006CB-TS2604 | Intersil Corporation | Switching Controller, Voltage-mode, 0.35A, 1000kHz Switching Freq-Max, BIPolar, PDSO14 ' RoHS : Not Compliant |
| 2,420 | ||
| DM54LS260W/883 | National Semiconductor Corporation | NOR Gate, LS Series, 2-Func, 5-Input, TTL, CDFP14 RoHS : Not Compliant |
| 8 | ||
SIT1602BC-22-18S-26.000000G![]() | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 26MHz 1.62V ~ 1.98V ±25ppm 4-SMD T/R RoHS : Compliant |
| 248 | ||
| SIT8003AC-22-33S-26.00000V | SiTime Corporation | SiT8003 - 1 to 110 MHz, Low Power Oscillator RoHS : Compliant |
| 3,000 | ||
![]() Sager | S260 | Switchcraft Conxall | Phone Connectors 3 COND.206BLACK RoHS : Compliant |
| 0 | |
| SW-04-04-T-S-260-180 | Samtec Inc | Power to the Board .200 Flex Stack RoHS : Compliant |
| 0 | ||
| TW-02-02-L-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-03-06-S-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-04-12-L-S-260-180 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-05-03-L-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-06-02-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-06-07-S-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-08-04-L-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-09-03-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-11-04-L-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-12-03-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-15-04-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-16-03-T-S-260-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-17-06-L-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() TME | ABLS-26.000MHZ-K4F-T![]() | Abracon Corporation | Crystal; 18pF; SMD; ESR: 40Ω; 26MHz; Freq.stability: ±50ppm RoHS : Unknown |
| 1,676 | |
| BPS 260-1 | Schmersal | Magnet; IP67; -25÷70°C; 26x36x13mm |
| 90 | ||
| BNS 260-02Z-ST-R | Schmersal | Safety switch: magnetic; BNS 260; NC x2; IP67; Electr.connect: M8 |
| 60 | ||
| BNS 260-11ZG-ST-L | Schmersal | Safety switch: magnetic; BNS 260; NC + NO; IP67; plastic; -25÷70°C |
| 28 | ||
| BNS 260-11Z-ST-L | Schmersal | Safety switch: magnetic; BNS 260; NC + NO; IP67; plastic; -25÷70°C |
| 20 | ||
| BNS 260-02ZG-ST-L | Schmersal | Safety switch: magnetic; BNS 260; NC x2; IP67; Electr.connect: M8 |
| 17 | ||
| BNS 260-02/01ZG-ST-R | Schmersal | Safety switch: magnetic; BNS 260; NC x3; IP67; -25÷70°C |
| 9 | ||
| BNS 260-11Z-ST-R | Schmersal | Safety switch: magnetic |
| 8 | ||
| EOS2 604 A | ReeR spa | Safety light curtain; H: 610mm; 12m; EOS2 A; Resolution: 40mm |
| 0 | ||
| QT161S-26.000MAAB-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 6pF; Freq.stability: ±30ppm |
| 0 | ||
| QT161S-26.000MEEI-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 16pF; Freq.stability: ±10ppm |
| 0 | ||
| QT252S-26.000MAAJ-T | QST Corporation | Crystal; 26MHz; SMD; 2.5x2x0.55mm; 18pF; Freq.stability: ±30ppm |
| 0 | ||
| QT252S-26.000MEEQ-T | QST Corporation | Crystal; 26MHz; SMD; 2.5x2x0.55mm; 10pF; Freq.stability: ±10ppm |
| 0 | ||
| B82720S2601N040 | TDK Corporation | Inductor: wire with current compensation; SMD; 4.4mH; 600mA RoHS : Compliant |
| 0 | ||
| B72500E0140S260 | TDK Corporation | Varistor: ceramics; SMD; 0603; 14VAC; 18VDC; 200mJ; 30A; 24.5V; ±15% RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | MURS260T3G | onsemi | MURS Series 2 A 600 V 75 ns Surface Mount Ultrafast Power Rectifier - CASE-403A RoHS : Compliant | 60,000 | ||
| DFLS260-7 | Diodes Incorporated | DFLS260 Series 60 V 2 A Surface Mount Schottky Barrier Rectifier - PowerDI-123 RoHS : Compliant | 15,416 | |||
| NTS260ESFT1G | onsemi | 2A 60V LOW LEAKAGE TRENC RoHS : Compliant | 10,336 | |||
| MBRS260T3G | onsemi | MBRS Series 2 A 60 V Surface Mount Schottky Power Rectifier RoHS : Compliant | 2,500 | |||
| SS26-0B00-02 | Broadcom Limited | 1,476 | ||||
![]() ComSIT USA | NTS260SFT1G | onsemi | AVAILABLE EU RoHS : Compliant | 791 | ||
| NRVTS260ESFT1G | onsemi | AVAILABLE EU RoHS : Compliant | 1,068 | |||
| MURS260T3G | onsemi | AVAILABLE EU RoHS : Compliant | 4,626 | |||
| MBRS260T3G | onsemi | AVAILABLE EU RoHS : Compliant | 3,000 | |||
![]() ComSIT USA | NRVBS260T3G | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon, DO-214AA RoHS : Compliant | 26,902 | ||
| OGS260 | omega | Electronic Component RoHS : Not Compliant | 12,000 | |||
| LGS260DOH | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Green, Diffused, 2.9mm RoHS : Not Compliant | 8,624 | |||
| GTCSSPM113LQLS260350R18 | OSRAM GmbH | Single Color LED RoHS : Compliant | 6,000 | |||
| B72500E5170S260 | TDK Electronics | SMD MULTILAYER VARISTOR Varistor, 22V, 0.075J, Surface Mount RoHS : Compliant | 4,000 | |||
| LGS260DO | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Green, Diffused, T-1, 2.9mm RoHS : Compliant | 3,000 | |||
IRS2607DSTRPBF![]() | International Rectifier | HIGH AND LOW SIDE DRIVER Full Bridge Based MOSFET Driver, 0.2A, CMOS, PDSO8 RoHS : Compliant | 2,500 | |||
| LGS260DOJ | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Green, Diffused, 2.9mm RoHS : Not Compliant | 1,995 | |||
| LYS260DOGEG | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Yellow, Diffused, 2.9mm RoHS : Not Compliant | 1,330 | |||
| LGS260D0GEGURT | Siemens | Electronic Component RoHS : Not Compliant | 960 | |||
| LYS260DO | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Yellow, Diffused, 2.9mm RoHS : Not Compliant | 640 | |||
| NRVTS260ESFT1G | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon RoHS : Compliant | 90 | |||
| DV8526515S2600RA | dev | Electronic Component RoHS : Compliant | 88 | |||
S2600M![]() | RCA | SILICON CONTROLLED RECTIFIER Silicon Controlled Rectifier, 7A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-5 RoHS : Not Compliant | 30 | |||
![]() Interstate Connecting Components | 55PC1111-22-9-9CS2606 | TE Connectivity | 55PC1111-22-9-9CS2606 | 0 | ||
| 55PC0211-12-9CS2600 | TE Connectivity | 55PC0211-12-9CS2600 | 0 | |||
| 55PC1121-16-6/9-9CS260 | TE Connectivity | 55PC1121-16-6/9-9CS2607 | 0 | |||
| 55PC0231-22-3/6/9CS260 | TE Connectivity | 55PC0231-22-3/6/9CS2602 | 0 | |||
| 55PC0211-4-9CS2600 | TE Connectivity | 55PC0211-4-9CS2600 | 0 | |||
| 55PC1111-16-9-9CS2606 | TE Connectivity | 55PC1111-16-9-9CS2606 | 0 | |||
| 55PC1121-18-6/9-9CS260 | TE Connectivity | 55PC1121-18-6/9-9CS2607 | 0 | |||
| 55PC0212-20-3CS2603 | TE Connectivity | 55PC0212-20-3CS2603 RoHS : Compliant | 0 | |||
| 55PC0231-14-3/6/9CS260 | TE Connectivity | 55PC0231-14-3/6/9CS2602 | 0 | |||
| 712FS260A1424-3 | Glenair Inc | GTK CONDUIT FITTING | 0 | |||
| 55PC1111-18-9-9CS2606 | TE Connectivity | 55PC1111-18-9-9CS2606 | 0 | |||
| 55PC0221-20-6/9CS2601 | TE Connectivity | 55PC0221-20-6/9CS2601 | 0 | |||
| 55PC0232-6-3/6/9CS2605 | TE Connectivity | 55PC0232-6-3/6/9CS2605 | 0 | |||
| 55PC0222-16-6/9CS2604 | TE Connectivity | 55PC0222-16-6/9CS2604 | 0 | |||
| 55PC0212-20-9CS2603 | TE Connectivity | 55PC0212-20-9CS2603 | 0 | |||
![]() NexGen Digital | MURS260T3G | onsemi | RoHS : Compliant | 17 | ||
| TKS2606CT-ND | TOKO Inc | 8 | ||||
![]() PEI Genesis | S3186FM77S2-6.0-34-2.0 | SOURIAU-SUNBANK |
| 0 | ||
| S2907S2606BIS034-000 | SOURIAU-SUNBANK |
| 0 | |||
| S4866S2608-34-1-3 | SOURIAU-SUNBANK |
| 0 | |||
| NRS-2-6000-5H | SOURIAU-SUNBANK |
| 0 | |||
| S3186F15S2-6.0-34-1.5 | SOURIAU-SUNBANK |
| 0 | |||
| DPX3NE-A318-34S-2601-FO | ITT Interconnect Solutions |
| 0 | |||
| S2900AS2607AIS034-000 | SOURIAU-SUNBANK |
| 0 | |||
| S2900AS2608LNS034-000 | SOURIAU-SUNBANK |
| 0 | |||
| DPX3NE-A318-34S-2601-F0 | ITT Interconnect Solutions |
| 0 | |||
![]() Powell Electronics | 55PC1111-22-9-9CS2606 | TE Connectivity | Connectors |
| 76,815 | |
| MTMM-101-04-T-S-260 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,880 | ||
| MTSW-202-08-T-S-260 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 988 | ||
| MTMM-105-07-S-S-260 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 686 | ||
| TW-03-03-T-S-260-060 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 643 | ||
| MTLW-108-07-T-S-260 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 356 | ||
| DW-01-17-T-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 286 | ||
| HMTSW-102-08-G-S-260 | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 285 | ||
| MTSW-118-09-T-S-260 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 244 | ||
| TW-08-02-T-S-260-060 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 232 | ||
| DW-04-08-T-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 216 | ||
| DW-06-15-L-S-260 | Samtec Inc | Flexible Board Stacking Header, 0.100 Pi RoHS : Compliant |
| 184 | ||
| DW-08-08-L-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 161 | ||
| MTSW-136-08-S-S-260 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 94 | ||
| DW-50-08-G-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 78 | ||
![]() Chip 1 Exchange | TS260S_R2_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 146,211 | ||
| LS-S260-DO | OSRAM GmbH | INSTOCK | 66,000 | |||
| LSS260-DO | OSRAM GmbH | INSTOCK RoHS : Not Compliant | 66,000 | |||
| MURS260T3G | onsemi | INSTOCK RoHS : Compliant | 61,750 | |||
| LGS260DO | OSRAM GmbH | INSTOCK | 17,493 | |||
| LGS260DO | Siemens | INSTOCK | 10,433 | |||
| MURS260T3G-ON | onsemi | INSTOCK | 7,155 | |||
| KLM4S260RY | TKS | INSTOCK | 3,224 | |||
| LYS260-D0 | OSRAM GmbH | INSTOCK | 2,985 | |||
| NTS260ESFT1G | onsemi | INSTOCK RoHS : Compliant | 1,500 | |||
| MPZ1608S260ATDH5 | TDK Corporation | INSTOCK RoHS : Compliant | 911 | |||
| PS2601 | INSTOCK | 49 | ||||
| DM54LS260J/883 | INSTOCK | 4 | ||||
| 54LS260DMQB | INSTOCK | 2 | ||||
| DM54LS2603J/883QS | INSTOCK | 2 | ||||
![]() Avnet Abacus | MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead 0603 1608 Metric 26 ohm 6 A MPZ Series 0007 ohm 25 (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 16,000 | ||
| B82725S2602N41 | TDK Corporation | (Alt: B82725S2602N041) RoHS : Compliant | 10,000 | |||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal Surface Mount 6 MHz SMD 114mm x 47mm 30 ppm 18 pF 30 ppm ABLS2 Series - Tape and Reel (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant | 3,000 | |||
| ECS-260-10-33B-CKM-TR | ECS International Inc | - Tape and Reel (Alt: ECS-260-10-33B-CKM-TR) RoHS : Compliant | 1,000 | |||
| MF-LS260 | Bourns Inc | (Alt: MF-LS260) RoHS : Compliant | 0 | |||
| 578S260CTT | CTS Corporation | - Tape and Reel (Alt: 578S260CTT) RoHS : Compliant | 0 | |||
| 578S260CAT | CTS Corporation | - Tape and Reel (Alt: 578S260CAT) RoHS : Compliant | 0 | |||
| 588S260X2CTT | CTS Corporation | - Tape and Reel (Alt: 588S260X2CTT) RoHS : Compliant | 0 | |||
| B72500E140S260 | TDK Corporation | TVS Varistor 14 VAC 18 VDC CTVS Standard 42 V 0603 1608 Metric Multilayer Varistor MLV (Alt: B72500E0140S260) RoHS : Compliant | 0 | |||
| DW-01-17-T-S-260 | Samtec Inc | Stacking Board Connector DW Series 1 Contacts Header Through Hole 1 Rows (Alt: DW-01-17-T-S-260) RoHS : Compliant | 0 | |||
| MTMM-101-04-T-S-260 | Samtec Inc | Pin Header BoardtoBoard 1 Rows 1 Contacts Through Hole MTMM Series (Alt: MTMM-101-04-T-S-260) RoHS : Compliant | 0 | |||
| MTLW-108-07-T-S-260 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 8 Contacts Through Hole MTLW Series (Alt: MTLW-108-07-T-S-260) RoHS : Compliant | 0 | |||
| MTSW-136-08-S-S-260 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 36 Contacts Through Hole MTSW Series (Alt: MTSW-136-08-S-S-260) RoHS : Compliant | 0 | |||
| ECS-260-8-47-CKM-TR | ECS International Inc | Crystal Standard 26 MHz SMD 16mm x 12mm x 03mm 10 ppm 8 pF 10 ppm ECX1247 - Tape and Reel (Alt: ECS-260-8-47-CKM-TR) RoHS : Compliant | 0 | |||
ECS-260-10-37Q-EP-TR![]() | ECS International Inc | - Tape and Reel (Alt: ECS-260-10-37Q-EP-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 0 | ||
| ECS-260-6-37B2-CKY-TR | ECS International Inc | (Alt: ECS-260-6-37B2-CKY-TR) RoHS : Compliant | 0 | |||
| MPZ1608S260ATAH0 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATAH0) RoHS : Compliant | 0 | |||
| MURS260T3G | onsemi | Power Rectifier, Ultra-Fast Recovery, 2 A, 600 V (Alt: MURS260T3G) RoHS : Compliant | 0 | |||
| PS26-057 | Sumida Corporation | (Alt: PS26-057) RoHS : Compliant | 0 | |||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal, Surface Mount, 6 MHz, SMD, 11.4mm x 4.7mm, 30 ppm, 18 pF, 30 ppm, ABLS2 Series (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant | 0 | |||
| TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant |
| 0 | ||
| ECS-260-8-30B-CKM | ECS International Inc | Crystal 26MHz 8pF 4-Pin Miniature SMD (Alt: ECS-260-8-30B-CKM) RoHS : Compliant | 0 | |||
| MBRS260T3G | onsemi | Schottky Rectifier, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MURS260T3G | onsemi | Power Rectifier UltraFast Recovery 2 A 600 V (Alt: MURS260T3G) RoHS : Compliant | 130,000 | ||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 90,000 | |||
| DFLS260-7 | Diodes Incorporated | Schottky Rectifier 60 V 2 A Single PowerDI 123 2 Pins 620 mV (Alt: DFLS260-7) RoHS : Compliant | 54,000 | |||
| CS2600-CN | Cirrus Logic | CLOCK SYNTHESIZER AND MULTIPLIER WITH PHASE SYNC A MULTIPLE (Alt: CS2600-CN) RoHS : Compliant | 0 | |||
| CS2600-CNR | Cirrus Logic | (Alt: CS2600-CNR) RoHS : Compliant | 0 | |||
| SL2S2602FTB | NXP Semiconductors | (Alt: SL2S2602FTB) RoHS : Compliant | 0 | |||
| FS2600AMBA0 | NXP Semiconductors | LQFP48 SAFETY SBC (Alt: FS2600AMBA0) RoHS : Compliant | 0 | |||
| MFS2600AMDA0AD | NXP Semiconductors | (Alt: MFS2600AMDA0AD) RoHS : Compliant | 0 | |||
| MFS2601AMDA0AD | NXP Semiconductors | (Alt: MFS2601AMDA0AD) RoHS : Compliant | 0 | |||
| SL2S2602FUD/BGZ | NXP Semiconductors | ICODE SLIX2 IC Wafer ISOIEC 1569323 (Alt: SL2S2602FUD/BGZ) RoHS : Compliant | 0 | |||
| MFS2602AMBA0ADR2 | NXP Semiconductors | AUTO SBC (Alt: MFS2602AMBA0ADR2) RoHS : Compliant | 0 | |||
| NCP163AFCS260T2G | onsemi | LDO Regulator 250 mA UltraHigh PSRR UltraLow Noise 26 V Active Discharge ONSSPCLDO (Alt: NCP163AFCS260T2G) RoHS : Compliant | 0 | |||
| SIT1602BI-13-18S-26.000000 | SiTime Corporation | (Alt: SIT1602BI-13-18S-26.000000) RoHS : Compliant | 0 | |||
| SIT1618BA-73-33S-26.000000E | SiTime Corporation | (Alt: SIT1618BA-73-33S-26.000000E) RoHS : Compliant | 0 | |||
| SIT1602BI-13-YYS-26.000000G | SiTime Corporation | MEMS Crystal Oscillator 26MHz 162V to 363V 15pF 4Pin SMD TR (Alt: SIT1602BI-13-YYS-26.000000G) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMMLPAALJS-26.0000T | Abracon Corporation |
| 0 | ||
| AMMLPVBVJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDAXCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEAXJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBLJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBXJS-26.0000T | Abracon Corporation |
| 0 | |||
| ABLS-26.000MHZ-D7G-F-T | Abracon Corporation | CRYSTAL 26.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| AMMLPABLRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAVJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBXCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABVJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEBXRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLALJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPAAXRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABVCS-26.0000T | Abracon Corporation |
| 0 | |||
![]() DB Roberts | TAS260A | Essentra Components | 1.25 IN SQUARE ALL METAL GLIDE | 0 | ||
| DLCBS2-6-01 | Essentra Components | CB SptDual LckNatural3/8 in Spc CB Support Dual Lock Natural | 0 | |||
| LCBS-2-6-01 | Essentra Components | CB SptDual LckNatural3/8 in Spc CB Spt Dual Lock Natural | 0 | |||
| XL-JS260TT | Sugatsune Kogyo Co Ltd | 0 | ||||
| OFBLTS2.6-05-PP | Essentra Components | 0 | ||||
![]() EBV Elektronik | TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant | 5,000 | ||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 2,500 | |||
| S2-60BW4 | SIMCom | CASING S260BW4 (Alt: S2-60BW4) RoHS : Not Compliant | 0 | |||
| S2-60BWC | SIMCom | CASING S260BWC (Alt: S2-60BWC) RoHS : Not Compliant | 0 | |||
| S2-60BW9 | SIMCom | PCB Board for S260BWF (Alt: S2-60BW9) RoHS : Compliant | 0 | |||
| MURS260T3G | onsemi | Power Rectifier UltraFast Recovery 2 A 600 V (Alt: MURS260T3G) RoHS : Compliant | 0 | |||
| SS26-0A0P-01 | Broadcom Limited | PPEX89144A01DB (Alt: SS26-0A0P-01) RoHS : Not Compliant | 0 | |||
| NRVBS260NT3G | onsemi | Schottky Power Rectifier Surface Mount 20 A 60 V SMB Package (Alt: NRVBS260NT3G) RoHS : Compliant | 0 | |||
| SS26-0B00-02 | Broadcom Limited | (Alt: SS26-0B00-02) RoHS : Compliant | 0 | |||
| MFS2600AMDA0AD | NXP Semiconductors | (Alt: MFS2600AMDA0AD) RoHS : Compliant | 0 | |||
| MFS2601AMDA0AD | NXP Semiconductors | (Alt: MFS2601AMDA0AD) RoHS : Compliant | 0 | |||
| PFS2603HMBK9AD | NXP Semiconductors | SOT1571eFS26 12NC 935466770557 (Alt: PFS2603HMBK9AD) RoHS : Compliant | 0 | |||
| MURS260HE3_A/H | Vishay Intertechnologies | (Alt: MURS260HE3_A/H) RoHS : Compliant | 0 | |||
| SL2S2602FUD/BGZ | NXP Semiconductors | ICODE SLIX2 IC Wafer ISOIEC 1569323 (Alt: SL2S2602FUD/BGZ) RoHS : Compliant | 0 | |||
| MFS2600AMDA0ADR2 | NXP Semiconductors | AUTO SBC (Alt: MFS2600AMDA0ADR2) RoHS : Compliant | 0 | |||
![]() Flip Electronics | NTS260SFT1G | onsemi | Stock, Ship Today RoHS : Compliant | 1,231,645 | ||
| A2T18S260-12SR3 | NXP Semiconductors | Stock RoHS : Compliant | 22,000 | |||
| MFS2603AMBA0AD | NXP Semiconductors | Stock RoHS : Compliant | 2,250 | |||
| MFS2603AMDA0AD | NXP Semiconductors | Stock | 500 | |||
![]() Master Electronics | S260 | Switchcraft Conxall | Conn Phone Plug M 3 POS Screw ST Cable Mount 3 Terminal 1 Port RoHS : Compliant |
| 401 | |
| SW-04-04-T-S-260-180 | Samtec Inc | .200 FLEX STACK RoHS : Compliant |
| 0 | ||
| TW-02-02-L-S-260-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-02-03-G-S-260-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-03-06-S-S-260-SM | Samtec Inc | 2Mm Terminal Strips |Samtec Inc. TW-03-06-S-S-260-SM RoHS : Compliant |
| 0 | ||
| TW-04-12-L-S-260-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-05-03-L-S-260-SM | Samtec Inc | 2Mm Terminal Strips |Samtec TW-05-03-L-S-260-SM RoHS : Compliant |
| 0 | ||
| TW-05-03-L-S-260-SM-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-05-04-G-S-260-SM-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-06-02-T-S-260-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-06-03-S-S-260-SM-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-06-04-L-S-260-SM-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-06-06-F-S-260-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-06-07-S-S-260-SM | Samtec Inc | 2Mm Terminal Strips |Samtec TW-06-07-S-S-260-SM RoHS : Compliant |
| 0 | ||
| TW-06-07-T-S-260-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | B82725S2602N041 | TDK Corporation | Common Mode Chokes / Filters RING CORE CHOKE 2x7.8mH 6.0A RoHS : Compliant |
| 50 | |
| MJS2-60B | ABB Low Voltage Products and Systems | Joystick 2-pos, Mom, w/o latching, Black, Non-illum, Chrome Metal, No contact block, 1SFA611702R6006 |
| 5 | ||
| M2SS2-60B01 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 1NC MAIN |
| 3 | ||
| M2SS2-60B02 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 2NC |
| 3 | ||
| CCP2S-2-60CF | Eaton Bussmann | Compact Circuit Protector;2 Pole;W/Side Mount Mechanism Right Side;CUBEForce;60A |
| 2 | ||
| M3SS2-60B20 | ABB Low Voltage Products and Systems | 3POS SW MOM BLK KNOB 2-NO |
| 1 | ||
| M2SS2-60B20 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 2NO |
| 0 | ||
| M2SS2-60B11 | ABB Low Voltage Products and Systems | 2POS KNOB; A&C; BLK; 1N0-1NC |
| 0 | ||
| BI2-CRS260-ADZ30X2-B3131/S34 | TURCK Inc | Proximity Sensor,Inductive Cylinder Position,Insertion Type,2mm Range |
| 0 | ||
| BI2-CRS260-AP4X2-H1141/S34 | TURCK Inc | Inductive Prox Sensor, R/A 12.7mm Smooth Barrel, R: 2mm flush, 3wire DC PNP NO, M12 Conn, 4570890 |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2346/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2346/HS2-60 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2346/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2346/HS2-60 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink. |
| 4,296 | |
| PE3C0053/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-240 Coax with Double Heatshrink., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0053/HS2-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0053/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink. |
| 2,168 | ||
| PE3C1135/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1135/HS2-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1135/HS2-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink. |
| 2,148 | ||
| PE3C3196/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Female to N Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a female gender on end 1 and male on end 2. PE3C3196/HS2-60 can also be known as a low loss SMA jack to N type plug cable assembly and will be shipped same-day as it is purchased. SMA jack to type N plug cable assembly PE3C3196/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3196/HS2-60 can also be used in the other direction and will be N type male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 814 | ||
| PE3C6334/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C6334/HS2-60 can also be known as a low loss right angle N type plug to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF plug cable assembly PE3C6334/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency N type right angle male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6334/HS2-60 can also be used in the other direction and will be UHF male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 507 | ||
| PE3C6335/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Female Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and female on end 2. PE3C6335/HS2-60 can also be known as a low loss right angle N type plug to UHF jack cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF jack cable assembly PE3C6335/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency type N right angle male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6335/HS2-60 can also be used in the other direction and will be UHF female to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 279 | ||
| PE3C0108/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to N Female Bulkhead Cable 12 Inch Length Using LMR-240 Coax with Double HeatShrink., Radio frequency assembly TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and N type bulkhead cable connection on the other. Our TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly, PE3C0108/HS2-60, can also be known as a TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to N type jack cable assembly PE3C0108/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0108/HS2-60 can also be used in the other direction and will be type N female bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink. |
| 240 | ||
| PE3C2368/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male RA to TNC Male RA Low Loss Cable 60 Inch Length Using LMR-400-DB Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2368/HS2-60 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C2368/HS2-60 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink. |
| 78 | ||
| PE3C1609/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMB Plug to SMA Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C1609/HS2-60 can also be known as a low loss SMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SMA plug cable assembly PE3C1609/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1609/HS2-60 can also be used in the other direction and will be SMA male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE3W00029/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-400 Coax with Double HeatShrink., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our low loss N type to type N cable assemblies have a female gender on end 1 and female on end 2. PE3W00029/HS2-60 can also be known as a low loss N type jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3W00029/HS2-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N female bulkhead to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink. |
| 0 | ||
| PE3C0051/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-60 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE3W00013/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00013/HS2-60 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3W00013/HS2-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00013/HS2-60 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink. |
| 0 | ||
| PE345/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE345/HS2-60 can also be known as a low loss type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE345/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE345/HS2-60 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE3C1041/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1041/HS2-60 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C1041/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1041/HS2-60 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE3C6004/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax with Double HeatShrink., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C6004/HS2-60 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C6004/HS2-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6004/HS2-60 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink. |
| 0 | ||
![]() Teledyne HiRel | DM54LS260J/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | ||
| DM54LS260E/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | |||
![]() Vyrian | MURS260T3 | onsemi | Rectifier Diode, 1 Phase, 1 Element, 2A, 600V V(RRM), Silicon, DO-214AA RoHS : Not Compliant | 12,296 | ||
| NTS260ESFT1G | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon RoHS : Compliant | 12,108 | |||
| SN74S260N1 | Texas Instruments | NOR Gate, TTL, PDIP14 RoHS : Not Compliant | 8,653 | |||
| SN74S260NP1 | Texas Instruments | NOR Gate, TTL, PDIP14 RoHS : Not Compliant | 8,613 | |||
| SN74S260D3 | Texas Instruments | NOR Gate, 2-Func, 5-Input, TTL, PDSO14 RoHS : Not Compliant | 8,567 | |||
| TMS2603NC | Texas Instruments | Arithmetic Circuit, MOS, PDIP24 RoHS : Not Compliant | 8,085 | |||
| SNJ54S260W-10 | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, CDFP14 | 7,825 | |||
SN74S260DG4![]() | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, PDSO14 RoHS : Compliant | 7,306 | |||
LM3S2608-IBZ50-A2![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, 50MHz, CMOS, PBGA108 RoHS : Compliant | 4,987 | |||
| SN74S260N-00 | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, PDIP14 | 4,722 | |||
| SN74S260J-00 | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, CDIP14 | 4,018 | |||
SN74S260NE4![]() | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, PDIP14 RoHS : Compliant | 3,639 | |||
LM3S2601-EQC50-A2![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, 50MHz, CMOS, PQFP100 RoHS : Compliant | 3,448 | |||
| TMS2602NC | Texas Instruments | Arithmetic Circuit, MOS, PDIP24 RoHS : Not Compliant | 3,158 | |||
| UES2605 | Microchip Technology Inc | Rectifier Diode, 1 Phase, 2 Element, 300V V(RRM), Silicon RoHS : Not Compliant | 2,838 | |||
![]() Win Source Electronics | NRVTS260ESFT1G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 300,000 | |
| DFLS260-7 | Diodes Incorporated | DIODE SCHOTTKY 60V 2A POWERDI123 RoHS : Compliant |
| 299,865 | ||
| MPZ1608S260ATAH0 | TDK Corporation | FERRITE BEAD 26 OHM 0603 1LN RoHS : Compliant |
| 204,000 | ||
| SDCW4532S-2-601TF | Sunlord | CMC 1A 2LN 600 OHM SMD RoHS : Compliant |
| 200,000 | ||
| MURS260T3 | onsemi | DIODE GEN PURP 600V 2A SMB RoHS : Not Compliant |
| 171,750 | ||
| MURS260T3G | onsemi | DIODE GEN PURP 600V 2A SMB / Rectifier Diode Switching 600V 2A 75ns 2-Pin SMB T/R RoHS : Compliant |
| 169,370 | ||
| NRVTS260ESFT3G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 140,000 | ||
| DFLS260Q-7 | Diodes Incorporated | DIODE SCHOTTKY 60V 2A POWERDI123 RoHS : Compliant |
| 64,088 | ||
| MBRS260T3G | onsemi | DIODE SCHOTTKY 60V 2A SMB RoHS : Compliant |
| 60,000 | ||
| NTS260SFT1G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 23,900 | ||
| NTS260ESFT1G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 22,500 | ||
| TGS2600 | FIGARO Engineering Inc |
| 5,850 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |