 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
S18T2CJ-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Master Electronics | BS18-C | Panduit Corp | Butt Splice non-insulated 22 – 18 AWG wire range standard package. RoHS : Compliant |
| 3,056 | |
| CCT-58S180-TS | Teledyne Coax Switches | Coaxial Switch - SP8T - 28 VDC Normally Open - 26.5 GHz - 50 Ohms - 1.7:1 VSWR - TTL Drivers With Diodes - D-Sub Connector. RoHS : Compliant |
| 5 | ||
| CCS-18S180-T | Teledyne Coax Switches | RF Switch Commercial DC-12GHz SMA Failsafe SP8T TTL RoHS : Compliant |
| 2 | ||
| IDSS-18-S-18.00 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-06-S-18.90-01-N | Samtec Inc | This flat Tiger Eye™ IDC socket cable system features an exceptionally low profile design with a multi-finger BeCu contact system for high reliability and high cycle applications. Optional rugged strain relief is available for a more robust connection in RoHS : Compliant |
| 0 | ||
| FFSD-08-S-18.49-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-10-S-18.27-01-F-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-10-S-18.28-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-25-S-18.00-01-N-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FN9244ES1-8-06 | TE Connectivity | IEC Inlet HP Filter 250VAC 8A Faston Earth Lin MOQ Reduction RoHS : Compliant |
| 0 | ||
| EP1WSS180RJ | TE Connectivity | EP 1W (SS) 180R 5% RoHS : Compliant |
| 0 | ||
| FRCIR02RFS-18-3P-F80-T54 | ITT Interconnect Solutions | Conn Rcpt Male 2POS Gold Crimp RoHS : Compliant |
| 0 | ||
| FRCIR02RFS181PF80T39VO | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| CIR00RS18-12P-F80T54-NPT1 | ITT Interconnect Solutions | Circular Connector - Receptacle - Male Pins - 6 Position - Shell Size-Insert 18-12 - Bayonet Lock - Crimp Contacts - Panel (Flange) Mount. RoHS : Compliant |
| 0 | ||
| CIR02RFS-18-11P-F80-V0 | ITT Interconnect Solutions | Circular Connector - Receptacle - Male Pins - 5 Position - Shell Size-Insert 18-11 - Bayonet Lock - Crimp Contacts - Panel (Flange) Mount. RoHS : Not Compliant |
| 0 | ||
 Avnet Americas | MMZ1005S182ET000 | TDK Corporation | Ferrite Bead, 0402 [1005 Metric], 1.8 kohm, 200 mA, MMZ-E Series, 1.5 ohm, ? 25% - Tape and Reel (Alt: MMZ1005S182ET000) RoHS : Compliant |
| 190,000 | |
| ES07B-GS18 | Vishay Intertechnologies | SWITCHING DIODE GENPURP SMF DO219AB - Tape and Reel (Alt: ES07B-GS18) RoHS : Compliant |
| 50,000 | ||
| MLG1005S18NJT000 | TDK Corporation | - Tape and Reel (Alt: MLG1005S18NJT000) RoHS : Compliant |
| 30,000 | ||
| LQG15HS18NJ02D | Murata Manufacturing Co Ltd | - Tape and Reel (Alt: LQG15HS18NJ02D) RoHS : Compliant |
| 10,000 | ||
| LS4148-GS18 | Vishay Intertechnologies | - Tape and Reel (Alt: LS4148-GS18) RoHS : Compliant |
| 10,000 | ||
| MPZ1608S181ATDH5 | TDK Corporation | - Tape and Reel (Alt: MPZ1608S181ATDH5) RoHS : Compliant |
| 8,000 | ||
LQW18AS18NJ0ZD%20Wirewound.jpg) | Murata Manufacturing Co Ltd | - Tape and Reel (Alt: LQW18AS18NJ0ZD) RoHS : Compliant |
| 8,000 | ||
| ECS-184-18-5PX-TR | ECS International Inc | - Tape and Reel (Alt: ECS-184-18-5PX-TR) RoHS : Compliant |
| 5,000 | ||
| SQS180ENW-T1_GE3 | Vishay Intertechnologies | Automotive N-Channel 40 V (D-S) 175C MOSFET PowerPAK 1212-8SLW - Tape and Reel (Alt: SQS180ENW-T1_GE3) RoHS : Not Compliant |
| 3,000 | ||
PTS181230V020 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 30 VDC, 200 mA, 400 mA, 0.02 s - Tape and Reel (Alt: PTS181230V020) RoHS : Compliant |
| 2,000 | ||
ASPI-6045S-180M-T | Abracon Corporation | - Tape and Reel (Alt: ASPI-6045S-180M-T) RoHS : Compliant |
| 1,500 | ||
| PS181HDMQFN56GTR2-A1 | Parade Technologies Ltd | - Bulk (Alt: PS181HDMQFN56GTR2-A1) RoHS : Not Compliant |
| 1,470 | ||
| RWR84S1820FSBSL | Vishay Intertechnologies | - Bulk (Alt: RWR84S1820FSBSL) RoHS : Not Compliant |
| 100 | ||
| RWR81S1870FRB12 | Vishay Intertechnologies | Through Hole Resistor, 187 ohm, RWR Series, 1 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Bulk (Alt: RWR81S1870FRB12) RoHS : Not Compliant |
| 75 | ||
| A8504952S18W | Amphenol Corporation | - Bulk (Alt: A8504952S18W) RoHS : Not Compliant |
| 1 | ||
 Newark | MTLW-102-05-G-S-180 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 2Pos; |Samtec, Inc. MTLW-102-05-G-S-180 RoHS : Compliant |
| 2,906 | |
| MTLW-102-05-G-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 2Pos; |Samtec, Inc. MTLW-102-05-G-S-185 RoHS : Compliant |
| 2,906 | ||
| 0402CS-18NXJRW | Coilcraft Inc | |Coilcraft 0402CS-18NXJRW RoHS : Compliant |
| 2,427 | ||
| 0402CS-18NXJRW | Coilcraft Inc | |Coilcraft 0402CS-18NXJRW RoHS : Compliant |
| 2,427 | ||
| MTMM-102-05-S-S-180 | Samtec Inc | Pin Header, Mtmm-102-05-S-S-180; |Samtec, Inc. MTMM-102-05-S-S-180 RoHS : Compliant |
| 2,150 | ||
| MTLW-106-07-G-S-189 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 6Pos; |Samtec, Inc. MTLW-106-07-G-S-189 RoHS : Compliant |
| 1,223 | ||
| MTMM-103-06-G-S-180-002 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 3Pos; |Samtec, Inc. MTMM-103-06-G-S-180-002 RoHS : Compliant |
| 1,164 | ||
| MTLW-107-05-G-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 7Pos; |Samtec, Inc. MTLW-107-05-G-S-185 RoHS : Compliant |
| 1,048 | ||
| MTLW-140-05-T-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 40Pos; |Samtec, Inc. MTLW-140-05-T-S-185 RoHS : Compliant |
| 500 | ||
| MTLW-115-05-G-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 15Pos; |Samtec, Inc. MTLW-115-05-G-S-185 RoHS : Compliant |
| 439 | ||
| RTS1BS18N23PHEC03R | Amphenol Sine Systems | Circular Connector, Rcpt, 23Pos, Crimp; Connector Type:Circular Industrial; Product Range:Ecomate Aquarius Series; Circular Connector Shell Style:Cable Mount Receptacle; No. Of Contacts:23Contacts; Coupling Style:Bayonet Rohs Compliant: Yes RoHS : Compliant |
| 50 | ||
| ECS130US18 | XP Power | Psu, Ac/Dc, Open Frame, Med, Adj, Fixed; |Xp Power ECS130US18 RoHS : Compliant |
| 33 | ||
| MDLM-37P6PS18B-F222 | ITT Interconnect Solutions | Cable Assy, Micro-D Plug-Free End, 18"; Connector To Connector:Micro-D Plug To Free End; No. Of Positions:37Positions; Cable Length - Imperial:18"; Cable Length - Metric:457.2Mm; Jacket Color:Multi-Colored; Product Range:Mdlm Series Rohs Compliant: Yes RoHS : Compliant |
| 13 | ||
| QS18VN6FF50Q7 | Banner Engineering Corp | Photoelectric Sensor, Digital-Npn, 50Mm; |Banner Engineering QS18VN6FF50Q7 RoHS : Compliant |
| 4 | ||
| RTS1BS18N23P03 | Amphenol Sine Systems | Receptacle, Inline, 23 Positions, Size 18, Pin Contact, Silicone Rubber Seal Rohs Compliant: Yes |Amphenol Sine/tuchel RTS1BS18N23P03 RoHS : Compliant |
| 2 | ||
 Analog Devices Inc | DS1818-10+ | Analog Devices Inc | 3.3V EconoReset with Pushbutto RoHS : Compliant |
| 90,549 | |
| DS1856B-050+ | Analog Devices Inc | Dual, Temperature-Controlled R RoHS : Compliant |
| 75,786 | ||
| DS1813-15+ | Analog Devices Inc | 5V EconoReset with Pushbutton RoHS : Compliant |
| 49,729 | ||
| DS1822+PAR | Analog Devices Inc | Econo 1-Wire Digital Thermomet RoHS : Compliant |
| 16,387 | ||
| DS1811R-15+T&R | Analog Devices Inc | 5V EconoReset with Open Drain RoHS : Compliant |
| 12,256 | ||
| DS1848B-010+T&R | Analog Devices Inc | Dual Temperature-Controlled NV RoHS : Compliant | 7,500 | |||
| DS1830AU+ | Analog Devices Inc | Reset Sequence Pushbutton RoHS : Compliant |
| 1,806 | ||
| DS1851E-010+ | Analog Devices Inc | Dual Temperature-Controlled NV RoHS : Compliant |
| 1,310 | ||
| DS1804U-050+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 446 | ||
| MAXREFDES18# | Analog Devices Inc | Reference design 16-bit PLC An |
| 12 | ||
| ADBMS1804AWFSCCSZ-R7 | Analog Devices Inc | 12V car low voltage battery mo RoHS : Compliant | 0 | |||
| DS1847B-010+ | Analog Devices Inc | Dual Temperature-Controlled NV RoHS : Compliant |
| 0 | ||
| LTC2327IMS-18#PBF | Analog Devices Inc | 18-B, 500ksps, ±10.24V True Bi RoHS : Compliant |
| 0 | ||
| LTC2328HMS-18#TRPBF | Analog Devices Inc | 18-B, 1Msps, ±10.24V True Bipo RoHS : Compliant |
| 0 | ||
| LTC2364IMS-18#TRPBF | Analog Devices Inc | 18-B, 250ksps, Pseudo-Diff Uni RoHS : Compliant |
| 0 | ||
 RS | QS-1/8-6 (153002) | Festo | PUSH-IN CONNECTOR, 1 PORT R 1/8 THREAD & 1 PORT 6MM OD TUBE, BLUE RING |
| 93 | |
| BS18-C | Panduit Corp | BUTT SPLICE NON-INSULATED 22 - 18 AWG WIRE RANGE RoHS : Compliant |
| 49 | ||
| NAS1829C4E04 | RAF Electronic Hardware | STAINLESS STEEL HEX MALE/FEMALE STANDOFF, PASSIVATED |
| 44 | ||
| NAS1831A4C32 | RAF Electronic Hardware | ALUMINUM HEX FEMALE STANDOFF/ANODIZE PLATE |
| 35 | ||
| SMBQS18A (69721) | Banner Engineering Corp | MOUNTING BRACKET, SENSORS WITH 18 MM THREAD, ZINC, SMB SERIES |
| 15 | ||
| BAM00F0 (BES 18-SM-2) | Balluff Inc | BES - INDUCTIVE SENSOR ACCESSORIES, BES18-SM-2 |
| 9 | ||
| S8VS-18024A (S8VS18024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 7.5A, 85-264V, ENCLOSED, PFC, 180W, S8VS SERIES |
| 8 | ||
| QS18EP6DVQ8 (75228) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 600MM, 10-30VDC, PNP, QD, QS18 |
| 5 | ||
| S18RW3DQ (29829) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 100MM, 20-250VAC, SSAC, QD, S18 |
| 4 | ||
| QS18VN6FQ8 (71782) | Banner Engineering Corp | WORLD-BEAM, GLASS FIBER, RANGE DEPENDS, QS18 SERIES |
| 2 | ||
| S18DLWXXPT (31673) | Banner Engineering Corp | INDICATOR PANEL EZ-LIGHT 18MM WHITE 10-30VDC PNP 4 WIRE SCREWS 31673 |
| 2 | ||
| VS18S511DF218A | Norgren | VALVE, 5/2, SOL/SOL, VS18 SERIES |
| 1 | ||
| BOS01KT (BOS 18E-X-RS20-S4) | Balluff Inc | PHOTOELECTRIC SENSOR, THROUGH BEAM, 20M, 10-30 VDC, M12, LED, 18E SERIES |
| 1 | ||
| ACS180-04S-02A4-2 (3AXD50000857388) | ABB Group | AC DRIVE, 3-PHASE, 200-240V, 0.5HP, FRAME R0, ACS311, ACS310 SERIES |
| 1 | ||
| S18 | Klein Tools Inc | 9/16" HOLLOW SHANK NUT DRIVER; 4" SHANK |
| 0 | ||
 STMicroelectronics | LD1117AS18TR | STMicroelectronics | Low drop fixed and adjustable positive voltage regulators RoHS : Compliant |
| 12,192 | |
| LD1117S18CTR | STMicroelectronics | Adjustable and fixed low drop positive voltage regulator RoHS : Compliant |
| 6,022 | ||
TS1852AIST | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 3,963 | ||
TS1851ILT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 2,519 | ||
| TS1871AILT | STMicroelectronics | 1.8V Input/Output Rail-to-Rail Low Power Operational Amplifiers RoHS : Compliant |
| 1,950 | ||
L78S18CV | STMicroelectronics | positive voltage regulator RoHS : Compliant |
| 133 | ||
| TS1851IDT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
| TS1872AIST | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
| TS1872AIYDT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1874AIYPT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
TS1874AIDT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
| TS1872IYDT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
| TS1874AIYDT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
| TS1874IPT | STMicroelectronics | 1.8V min. voltage supply, micropower RoHS : Compliant |
| 0 | ||
LFTVS18-1F3 | STMicroelectronics | 20 A - 8/20 ?s, 12 V TVS in CSP P 0.4 mm RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | MCP1826S-1802E/AB | Microchip Technology Inc | 1.0A LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 18,340 | |
| MCP1755S-1802E/MC | Microchip Technology Inc | 16v, 300 mA low quiescent current LDO with shutdown, DFN, Projected EOL: 2040-12-26 RoHS : Compliant |
| 17,100 | ||
| MCP1825S-1802E/AB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 15,150 | ||
| MCP1825S-1802E/DBVAO | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2051-01-09 RoHS : Compliant |
| 13,182 | ||
MCP1826S-1802E/EB | Microchip Technology Inc | 1.0A LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 10,900 | ||
MCP1825S-1802E/EB | Microchip Technology Inc | 500MA LOW VOLTAGE, LOW IQ LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 4,100 | ||
| MCP1826S-1802E/DB | Microchip Technology Inc | 1.0A LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 3,869 | ||
MCP23S18T-E/MJ | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2036-10-02 RoHS : Compliant |
| 1,035 | ||
| AC31S18A | Microchip Technology Inc | AVR Programming Adapter, Projected EOL: RoHS : Compliant |
| 279 | ||
MCP23S18-E/SP | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SPDIP, Projected EOL: 2036-09-30 RoHS : Compliant |
| 210 | ||
| MCP23S18T-E/MJVAO | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2046-07-06 RoHS : Compliant |
| 148 | ||
MCP23S18-E/SO | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with 12C Interface, SOIC, Projected EOL: 2036-09-30 RoHS : Compliant |
| 107 | ||
| MCP1825S-1802E/DB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 58 | ||
| MCP23S18-E/MJ | Microchip Technology Inc | 16-Bit, Open Drain I/O Expander with I2C Interface, QFN, Projected EOL: 2036-10-02 RoHS : Compliant |
| 27 | ||
| AT68166H-YS18-E | Microchip Technology Inc | 16Mbit 512Kx32 SRAM MCM,18ns Prot, CQFP, Projected EOL: 2040-12-03 - Contact for Pricing RoHS : Compliant | 3 | |||
 Bisco Industries | NAS1802-06-9 | Parker Fasteners | 13,060 | |||
| NAS1801-3-30 | Heartland Precision Fasteners Inc | 5,756 | ||||
| NAS1829-4E24 | RAF Electronic Hardware | 4,572 | ||||
| NAS1829C4E04 | Lyn-Tron Inc | 4,104 | ||||
| NAS1829A3C09 | RAF Electronic Hardware | 495 | ||||
| NAS1829C4G11 | Lyn-Tron Inc | 146 | ||||
| AES18U164875EA3A31 | SOCKET SCREWS | 110 | ||||
| AES18C112250EA3A31 | SOCKET SCREWS | 75 | ||||
| NAS1802-06-9 | NAS HEX CAP SCREWS | 45 | ||||
| NAS1829C4E04 | RAF Electronic Hardware | 40 | ||||
| NAS1829C4G11 | NAS SPACERS/STANDOFFS/HANDLES | 23 | ||||
| NAS1802-06-9 | Heartland Precision Fasteners Inc | 10 | ||||
| NAS1829C4E04 | UNICORP | 3 | ||||
| NAS1801-3-30 | Mac Fastteners Inc | 2 | ||||
| NAS1829-4E24 | NAS SPACERS/STANDOFFS/HANDLES | 2 | ||||
 Rochester Electronics | DS1830AU+ | Analog Devices Inc | Supervisory Circuit 2.55V, 2.88V, 3.06V 8-SOP Tube RoHS : Compliant |
| 600 | |
| SN74ALS1808AN | Texas Instruments | AND Gate, ALS Series, 6-Func, 2-Input, TTL, PDIP20 RoHS : Not Compliant |
| 125 | ||
| DS1804Z-100 | Maxim Integrated Products | Pot Digital 1 Element 100 POS 100 kOhm 2.7V ±20% 8-SOIC Tube RoHS : Not Compliant |
| 7 | ||
| DS1806E-100 | Maxim Integrated Products | Pot Digital 6 Element 64 POS 100 kOhm 2.7V ±20% 20-SOP Tube RoHS : Not Compliant |
| 11 | ||
DS1811-15/T&R | Maxim Integrated Products | Supervisory Circuit 4.13V TO-226-3 T/R RoHS : Not Compliant |
| 2,000 | ||
| DS1813-10 | Maxim Integrated Products | Supervisory Circuit 4.35V TO-226-3 Bag RoHS : Not Compliant |
| 4,906 | ||
| DS1813-15+ | Maxim Integrated Products | Supervisory Circuit 4.13V TO-226-3 Bag RoHS : Compliant |
| 6,696 | ||
DS1813R-5-U | Maxim Integrated Products | 5V Econoreset With Pushbutton RoHS : Not Compliant |
| 2,705 | ||
| DS1814CR-5-U+ | Maxim Integrated Products | DS1814 5-Volt Micromonitor RoHS : Compliant |
| 2,786 | ||
| DS1830AU+ | Maxim Integrated Products | Supervisory Circuit 2.55V, 2.88V, 3.06V 8-SOP Tube RoHS : Compliant |
| 820 | ||
DS1847B-010+ | Maxim Integrated Products | Pot Digital 2 Element 256 POS 10 kOhm 3V ±20% 16-BGA Tray RoHS : Compliant |
| 745 | ||
| DS1855B-050 | Maxim Integrated Products | Digital Potentiometer, 2 Func, 50000ohm, 2-wire Serial Control Interface, 256 Positions, PBGA16 RoHS : Not Compliant |
| 2,920 | ||
| DS1867SN-050/TR/ | Maxim Integrated Products | DS1867 Dual Digital Potentiometer With Eeprom RoHS : Not Compliant |
| 2,000 | ||
| NP80N04MHE-S18-AY | Renesas Electronics Corporation | MOSFET N-Channel 40V 80A TO-220-3 Tube RoHS : Compliant |
| 227,950 | ||
| TS1851IDT | STMicroelectronics | Op Amp Standard 656kHz 8-SOIC T/R RoHS : Compliant |
| 2,500 | ||
 Sager | FFSD-06-S-18.90-01-N | Samtec Inc | Ribbon Cables / IDC Cables .050 Low Profile Tiger Eye IDC Ribbon Cable Assembly RoHS : Compliant |
| 0 | |
| FN9244ES1-8-06 | TE Connectivity | AC Power Entry Modules 8A IEC INLET FILTER SNAP-IN W/CHOKE RoHS : Compliant |
| 0 | ||
| BS18-C | Panduit Corp | Terminals BUTT SPLICE 22-18 RoHS : Compliant |
| 0 | ||
| CPAS-181-ZWGG-15DI | Samtec Inc | IC & Component Sockets |
| 0 | ||
| 482-G111-K1M1-A1S1-8A | E-T-A | Circuit Breakers | 0 | |||
| 23S180 | Murata Power Solutions | Power Inductors - SMD | 0 | |||
| 10599-22-9CS1830 | TE Connectivity | TE Connectivity 10599-22-9CS1830 | 0 | |||
| ZG05L2-4S-1.8HU/R | Hirose Electric Co Ltd | Automotive Connectors | 0 | |||
| S1856MPC10NF | TE Connectivity | TE Connectivity | 0 | |||
ATS-18A-103-C2-R1 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,SUPER FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-18A-108-C3-R1 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,SUPER FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
ATS-18A-115-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 |
| 0 | ||
ATS-18A-121-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
ATS-18A-134-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
| ATS-18A-139-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T766 |
| 0 | ||
 Coilcraft Direct | 0603LS-181XGRC | Coilcraft Inc | RF inductor, ferrite core, 2% tol, SMT, RoHS, Halogen Free R RoHS : Compliant |
| 5,663 | |
| 0805LS-182XGEC | Coilcraft Inc | RF inductor, ferrite core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 3,284 | ||
| 1008CS-180XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 2,214 | ||
| 1008CS-180XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,884 | ||
| 0805LS-182XJLC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS RoHS : Compliant |
| 1,882 | ||
| 0805CS-181XFRC | Coilcraft Inc | RF inductor, ceramic core, 1% tol, SMT, RoHS, halogen-free RoHS : Compliant | 1,400 | |||
| 1008LS-182XJLC | Coilcraft Inc | RF inductor, ferrite core, 5% tol, SMT, RoHS RoHS : Compliant |
| 1,381 | ||
| 1008CS-182XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,225 | ||
| 0603CS-18NXGE | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 1,030 | ||
| 0402CS-18NXJRW | Coilcraft Inc | RF Inductor, ceramic core, 5% toll, SMT, RoHS, halogen-free RoHS : Compliant |
| 1,016 | ||
| 0603CS-18NXJL | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 541 | ||
| 1008HS-180TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, Halogen-Free RoHS : Compliant |
| 0 | ||
| 0805HS-180TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 0603LS-183XGEC | Coilcraft Inc | RF inductor, ferrite core, 2% tol, SMT, RoHS, Halogen Free RoHS : Compliant | 0 | |||
| 0603CS-18NXHR | Coilcraft Inc | RF inductor, ceramic core, 3% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
 TME | TZMC47-GS18 | Vishay Intertechnologies | Diode: Zener; 500mW; 47V; SMD; MiniMELF,SOD80; 100nA RoHS : Compliant |
| 590,000 | |
| TZMC12-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 12V; SMD; MiniMELF,SOD80; single diode RoHS : Compliant |
| 21,186 | ||
| S18211TC421 | Molex | Connector: valve connector; industrial; 24V; for cable; 2P |
| 59 | ||
| VMS-180C-48-CNF | Bel Power Solutions | VMS-180C-48-CNF |
| 51 | ||
| POSAC-C13AS/NZS18 | POS | Cable; H05VV-F; 3x0.75mm2; AS/NZS 3112 (I) plug,IEC C13 female |
| 36 | ||
| ECS130US18 | XP Power | Power supply: switching; open; 130W; 80÷264VAC; OUT: 1; 18VDC; 7.3A RoHS : Compliant |
| 1 | ||
| ES 18 I | Pneumatic Components Limited (PCL) | Quick connection coupling; 0÷35bar; brass; 39mm; NW 7,2 |
| 0 | ||
| EMH350PS18-01 | XP Power | Power supply: switching; open; 354W; 80÷275VAC; OUT: 1; 18VDC; 19.5A |
| 0 | ||
| BZT55C18-GS18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 18V; SMD; SOD80; single diode RoHS : Compliant |
| 0 | ||
CMS-1852-24SP | Same Sky | Loudspeaker; miniature; 2W; 4Ω; Ø18x5.2mm; 20kHz; Ø: 18mm RoHS : Compliant |
| 0 | ||
| RTS1BS18N23P03 | Amphenol Corporation | Connector: circular; plug; industrial; eco|mate Aquarius; crimped |
| 0 | ||
| TS1851IDT | STMicroelectronics | IC: operational amplifier; 656kHz; Ch: 1; 1.8÷6VDC; SO8; 6mV RoHS : Compliant |
| 0 | ||
| TS18710D0000G | Amphenol Anytek | Connector: pluggable terminal block; plug; female; power supply |
| 0 | ||
| VSMY3850-GS18 | Vishay Intertechnologies | IR transmitter; PLCC2; 850nm; transparent; 55mW; 120°; 1.6VDC; SMD RoHS : Compliant |
| 0 | ||
| E2A-S18LS08-WP-C1 2M | OMRON Corporation | Sensor: inductive; OUT: NPN / NO; 0÷8mm; 12÷24VDC; M18; 2m; IP67 |
| 0 | ||
 Ameya Holding Limited | VS18VUA1LAMTR | ROHM Semiconductor | 瞬态电压抑制器 RoHS : Compliant |
| 6,100 | |
| VS18VUA1LAMTFTR | ROHM Semiconductor | 瞬态电压抑制器（AEC-Q101标准） RoHS : Compliant |
| 3,000 | ||
| DS1811R-15+TR | Analog Devices Inc | DS1811R-15 ECONORESET | 2,529 | |||
| NS18B20-QTOS | Suzhou Novosense Microelectronics Co Ltd | 2,000 | ||||
| LP3873ES-1.8V | Texas Instruments | 409 | ||||
| DS1816R-10+T&R | Analog Devices Inc | DS1816 Series 2.97 V 250 ms SMT Open Drain Simple Reset/Power On Reset - SOT-23 RoHS : Compliant | 389 | |||
| DS1804Z-010+ | Analog Devices Inc | RoHS : Compliant | 100 | |||
| VS18VUA1LBTBR1 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| VS18VUA1VWMTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| ICS1892Y | Renesas Electronics Corporation | 91 | ||||
| DS1818R-5+T&R | Analog Devices Inc | DS1818 Series 3.15 V 250 ms SMT Open Drain Simple Reset/Power On Reset - SOT-23 RoHS : Compliant | 86 | |||
| DS1804Z-010+T&R | Analog Devices Inc | DS1804 Series 100 Step 10kOhm Non-Volatile Trimmer Potentiometer - SOIC-8 RoHS : Compliant | 45 | |||
| DS1804-010+ | Analog Devices Inc | IC: digital potentiometer; 10kΩ; Up/Down Protocol; 7bit; DIP8; THT RoHS : Compliant | 27 | |||
SN65LVDS180PWR | Texas Instruments | IC DIFF LINE DVR/RCVR HS 14TSSOP RoHS : Compliant | 27 | |||
| DS1818R-10+T&R | Analog Devices Inc | DS1818 Series 2.97 V 250 ms SMT Open Drain Simple Reset/Power On Reset - SOT-23 RoHS : Compliant | 25 | |||
 ComSIT USA | DS1818R20TR | Analog Devices Inc | AVAILABLE EU | 1,944 | ||
ComSIT USA | BZT52B5V6VGS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 5.6V V(Z), 1.96%, 0.41W, Silicon, Unidirectional RoHS : Compliant | 165,670 | ||
| ZMY20GS18 | Vishay Intertechnologies | ZENER DIODE Zener Diode, 20V V(Z), 6%, 1W, Silicon, Unidirectional, DO-213AB RoHS : Compliant | 60,000 | |||
| TZMB6V8GS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 6.8V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 60,000 | |||
| TZMC30GS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 30V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 50,000 | |||
| TZMB9V1GS18 | Vishay Intertechnologies | Zener Diode, 9.1V V(Z), 2%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 40,000 | |||
| TZMC22GS18 | Vishay Intertechnologies | Zener Diode, 22V V(Z), 5%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 10,000 | |||
| 1N4148WSVGS18 | Vishay Intertechnologies | SMALL SIGNAL FAST SWITCHING DIODE Rectifier Diode, 1 Phase, 1 Element, 0.15A, 100V V(RRM), Silicon RoHS : Compliant | 10,000 | |||
| VLME31N2Q134GS18 | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 8,000 | |||
| ZM4742AGS18 | Vishay Intertechnologies | ZENER DIODE Zener Diode, 12V V(Z), 5%, 1W, Silicon, Unidirectional, DO-213AB RoHS : Compliant | 5,000 | |||
| TS1851IDT | STMicroelectronics | 1.8V INPUT/OUTPUT RAIL-TO-RAIL LOW POWER OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 3000uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 2,500 | |||
| 1S1885A | Toshiba America Electronic Components | SILICON DIFFUSED TYPE RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 1.2A, 100V V(RRM), Silicon, DO-15 RoHS : Not Compliant | 1,800 | |||
| DS181215 | Maxim Integrated Products | 5V ECONORESET WITH ACTIVE HIGH PUSH-PULL OUTPUT Power Supply Support Circuit, Fixed, 1 Channel, +4.13VV, CMOS, PBCY3 RoHS : Not Compliant | 1,300 | |||
Z8S18020VSC | Zilog Inc | ENHANCED MICROPROCESSOR WITH FASTER EXECUTION, POWER-SAVER MODE, LOW EMI Microprocessor, 8-Bit, 20MHz, CMOS, PQCC68 RoHS : Not Compliant | 112 | |||
| ICS1893CFILE | ics | 3.3-V 10BASE-T/100BASE-TX INTEGRATED PHYCEIVER Interface Circuit, 1-Trnsvr, CMOS, PDSO48 RoHS : Compliant | 17 | |||
EP2S180F1020C4N | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Compliant | 5 | |||
 Interstate Connecting Components | MS3450LS18-9PZ | Conesys | Wall Mt. Receptacle Stainless Psvt |
| 36 | |
| MS3450KS18-4SY | Conesys | Wall Mt. Receptacle Stainless Psvt |
| 12 | ||
| FRCIR02RFS181PF80T39VO | ITT Interconnect Solutions | FRCIR02RFS-18-1P-F80-T39-VO | 0 | |||
| FRITS4102RFS18-19SB0F7 | Glenair Inc | 0 | ||||
| CIR00RS18-12P-F80T54-NPT1 | ITT Interconnect Solutions | MFR PN: 000860870 |
| 0 | ||
| CIR02RFS1812PF80T12 | ITT Interconnect Solutions | CIR02RFS-18-12P-F80-T12 | 0 | |||
| 388HS182XM15-04 | Glenair Inc | Glenair | 0 | |||
| RPS-18-12/2.0-4-CS-001 | TE Connectivity | RPS-18-12/2.0-4-CS-0016 | 0 | |||
| RTS1BS18N23P03 | Amphenol Sine Systems | RECPT INLINE 23 POS SZ 18, PIN, SILCN SEAL |
| 0 | ||
| RTS1BS18N23PHEC03R | Amphenol Sine Systems | RECEPTACLE, INLINE, 23 POSITIO | 0 | |||
| A85049109S18TX056 | Amphenol PCD | M85049109S18TX05-6 | 0 | |||
| A85049146S18X08 | Amphenol PCD | M85049146S18X08 | 0 | |||
| MS3406DS18-1SZ | Conesys | CONNECT STRT PLUG |
| 0 | ||
| MS3450LS18-15A | Amphenol Aerospace | RECEPT 3450LS1815A | 0 | |||
| MS3451LS18-12S L/C | Amphenol Aerospace | RECEPT 3451LS1812SL | 0 | |||
 NexGen Digital | RMC16S-181JTH50K | Kamaya Inc | 18,000 | |||
| RMC1/16S-181JTH99 | Kamaya Inc | 6,634 | ||||
| LQG15HS18NJ02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 5,167 | |||
| 1008CS-180KXBC | Coilcraft Inc | 1,991 | ||||
| 0805CS180XJBC | Coilcraft Inc | 933 | ||||
| 1008HS-181TJBC | Coilcraft Inc | RoHS : Not Compliant | 875 | |||
| 1008CS-182XJBC | Coilcraft Inc | RoHS : Not Compliant | 814 | |||
| 1812LS-183XJBC | Coilcraft Inc | RoHS : Not Compliant | 500 | |||
| DS1818R-5+ | Maxim Integrated Products | 143 | ||||
| ATC600S180GT250 | American Technical Ceramics Corp | 82 | ||||
| 0603LS-181XJLC | Coilcraft Inc | RoHS : Compliant | 60 | |||
| LP3873ES-1.8/NOPB | National Semiconductor Corporation | RoHS : Compliant | 49 | |||
| NAS186DD3C6.B | 40 | |||||
| DS1818R-5-U+ | Maxim Integrated Products | RoHS : Compliant | 13 | |||
| DS18S20Z | Dallas Semiconductor | RoHS : Not Compliant | 8 | |||
 PEI Genesis | EXS-18-H6-20-313PN-05 | Amphenol Corporation |
| 0 | ||
| RTS1BS18N23P03 | Amphenol Sine Systems |
| 0 | |||
| S1802-04-1.5-34 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-13-1.5-34 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-28-2.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| S1814-2712T | SOURIAU-SUNBANK |
| 0 | |||
| S1844-65R30SD | SOURIAU-SUNBANK |
| 0 | |||
| S1852-64-34 | SOURIAU-SUNBANK |
| 0 | |||
| S1895-09R02-3H | SOURIAU-SUNBANK |
| 0 | |||
| S1895-28R01-3H | SOURIAU-SUNBANK |
| 0 | |||
| S4160CS1807-12 | SOURIAU-SUNBANK |
| 0 | |||
| S5283S1812CN6-109 | SOURIAU-SUNBANK |
| 0 | |||
| 85330ES1808P6 | SOURIAU-SUNBANK |
| 0 | |||
| 85337RS1808P6L | SOURIAU-SUNBANK |
| 0 | |||
| AE83383S18317 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
 Powell Electronics | MTLW-102-05-G-S-180 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 1,918 | |
| MTMM-103-06-G-S-180-002 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 768 | ||
| MTLW-107-05-G-S-185 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 692 | ||
| MTLW-140-05-T-S-185 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 330 | ||
| MS3456LS18-4SZ | Conesys | Straight Plug |
| 182 | ||
| AIS18F08AP024-Q65 | Altech Corporation | SENSOR-M18-S8.0-F-1030VDC |
| 74 | ||
| MS3456KS18-9S | Conesys | Straight Plug |
| 52 | ||
| MS3456LS18-8PY | Conesys | STAIGHT PLUG |
| 41 | ||
| MS3450LS18-9PZ | Conesys | Wall Mount Receptacle |
| 28 | ||
| MS3450KS18-1PLC | Amphenol Corporation | CONNECTOR |
| 6 | ||
| MS3454LS18-10SW | Conesys | JAM NUT REC. |
| 4 | ||
| MS3454LS18-1PX | Conesys | Jam Nut Receptacle |
| 4 | ||
| MS3456KS18-12S | Conesys | Straight Plug |
| 4 | ||
| MS3459LS18-12SZ | Conesys | Self Locking Plug |
| 4 | ||
| 3459KS188S | Amphenol Corporation | MIL-C 5015 AMPHENOL/MATRIX CONNECTOR |
| 3 | ||
 PUI | CBW57-HS-18A | 122 | ||||
| 0103-1P07S18TSAA01 | 5 | |||||
 Richardson RFPD | CS-18S18C-T | Teledyne Relays | RF Switch SP8T 0MHz to 8GHz 60dB RoHS : Compliant | 0 | ||
| CCS-18S18C-T | Teledyne Relays | RF Coaxial Switch RoHS : Not Compliant | 0 | |||
| CCS-18S18O-T | Teledyne Relays | RF Switch SP8T 0MHz to 8GHz 60dB RoHS : Not Compliant | 0 | |||
| CCS-18N48C | Teledyne Relays | RF COAXIAL SWITCH RoHS : Compliant | 0 | |||
| CMZF12S1.8-6000 | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
406I35S18M43200 | CTS Corporation | Crystal 18.432MHz ±30ppm (Tol) ±50ppm (Stability) RoHS : Compliant |
| 0 | ||
| ZFW48S1.8-8000 | Wall Industries Inc | 30 Watts DC/DC Converter Single Output RoHS : Compliant | 0 | |||
| ACS5S18RJTR | Ohmite Mfg Co | WIREWOUND RESISTOR RoHS : Compliant | 0 | |||
| TS180F-50W | Spectrum Control | RF COAX TERMINATION RoHS : Compliant |
| 0 | ||
| TS180FC | Spectrum Control | Terminations Sma, Up To 26.5 Ghz, 1Watt RoHS : Compliant |
| 0 | ||
| EKMS181VSN122MQ45S | United Chemi-Con Inc | Cap Aluminum Lytic 1200uF 180V 20% (25.4 X 45mm) S RoHS : Compliant | 0 | |||
| 600S180KT250XT | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 10% Pad SMD 0603 125C Ul RoHS : Compliant | 0 | |||
| EKMS181VSN102MR30S | United Chemi-Con Inc | Cap Aluminum Lytic 1000uF 180V 20% (30 X 30mm) Sna RoHS : Compliant | 0 | |||
| LTC2327IMS-18#PBF | Analog Devices Inc | 1-Channel Single ADC SAR 500ksps 18-bit Serial 16- RoHS : Compliant |
| 0 | ||
| LTC2328HMS-18#TRPBF | Analog Devices Inc | 1-Channel Single ADC SAR 1Msps 18-bit Serial 16-Pi RoHS : Compliant |
| 0 | ||
 Rutronik | TZMC12-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 12V 5% MINIMELF RoHS : Compliant |
| 170,000 | |
| S07J-GS18 | Vishay Intertechnologies | SI-DIODE 0,7A 600V SMF DO219AB RoHS : Compliant |
| 140,000 | ||
| LL4448-GS18 | Vishay Intertechnologies | SI-DIODE 0,150A 100V MINIMELF RoHS : Compliant |
| 100,000 | ||
| TZMB18-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 2% MINIMELF RoHS : Compliant |
| 100,000 | ||
| TZMC5V1-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 5,1V 5% MINIMELF RoHS : Compliant |
| 80,000 | ||
| TZMC10-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 10V 5% MINIMELF RoHS : Compliant |
| 70,000 | ||
| LQG15HS18NJ02D | Murata Manufacturing Co Ltd | LQG15HS 0,018uH 300mA 5% MLT RoHS : Compliant |
| 40,000 | ||
| BAV103-GS18 | Vishay Intertechnologies | SI - DIODE 0,25A 250V MINIMELF RoHS : Compliant |
| 40,000 | ||
| TZMC18-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 5% MINIMELF RoHS : Compliant |
| 30,000 | ||
| TZMC75-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 75V 5% MINIMELF RoHS : Compliant |
| 20,000 | ||
| TZMC39-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 39V 5% MINIMELF RoHS : Compliant |
| 10,000 | ||
| TZMC27-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 27V 5% MINIMELF RoHS : Compliant |
| 10,000 | ||
| ZM4742A-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 12V 5% MELF RoHS : Compliant |
| 10,000 | ||
| PTS181216V050 | Eaton Electronics | 0.5A resettable PTC 16V 1812 RoHS : Compliant |
| 2,000 | ||
| IS181C | Isocom Components | COUPLER SMD-4 50 -600% 5mA 5V RoHS : Compliant |
| 10 | ||
 Chip 1 Exchange | AS186-302 | Skyworks Solutions Inc | INSTOCK RoHS : Not Compliant | 29,660 | ||
| MLK1005S18NJ | TDK Corporation | INSTOCK RoHS : Compliant | 24,495 | |||
| RS1-8201-J1 | INSTOCK | 23,677 | ||||
| CWS1812-102JTR | INSTOCK | 22,500 | ||||
| BZT55C13-GS18 | INSTOCK | 9,900 | ||||
| BZX84B2V4-GS18 | Vishay Intertechnologies | INSTOCK | 8,500 | |||
| MMSZ4689-V-GS18 | INSTOCK | 7,290 | ||||
| SN74ALS1808AN | INSTOCK | 1,877 | ||||
| IS181D | INSTOCK | 1,620 | ||||
| DS18B20X/T&R | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 576 | |||
| SN74ALS1808AN | Texas Instruments | INSTOCK RoHS : Not Compliant | 350 | |||
| VLMG3105-GS18 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 188 | |||
| NAS1837T2 | INSTOCK | 50 | ||||
| DS1804Z-100 | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 49 | |||
| DS1830AS | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 5 | |||
 Avnet Abacus | LQG15HS18NJ02D | Murata Manufacturing Co Ltd | Multilayer Inductor 18 nH 036 ohm 22 GHz 300 mA 0402 1005 Metric LQG15HS02 Series (Alt: LQG15HS18NJ02D) RoHS : Compliant | 40,000 | ||
| MMZ1005S182ET000 | TDK Corporation | Ferrite Bead 0402 1005 Metric 18 kohm 200 mA MMZE Series 15 ohm 25 (Alt: MMZ1005S182ET000) RoHS : Compliant | 40,000 | |||
| MMZ1005S182ETD25 | TDK Corporation | MMZ1005S182ETD25 (Alt: MMZ1005S182ETD25) RoHS : Compliant | 10,000 | |||
| PTS181230V020 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 30 VDC 200 mA 400 mA 002 s - Tape and Reel (Alt: PTS181230V020) RoHS : Compliant | 8,000 | |||
| PTS181216V110 | Eaton Corporation | Resettable Fuse PPTC 1812 4532 Metric PolyTron PTS1812 16 VDC 11 A 22 A 05 s - Tape and Reel (Alt: PTS181216V110) RoHS : Compliant | 2,000 | |||
| ATBS-PS-1805 | Amphenol Corporation | Backshell for T1618PSX and AT1615PSX Series 1518 Position HeavyDuty Connectors 18 Shell Size ST Thermoplastic (Alt: ATBS-PS-1805) RoHS : Compliant | 1,050 | |||
ECM140US18 | XP Power | POWER SUPPLY 140WATT OPEN FRAME (Alt: ECM140US18) RoHS : Compliant | 10 | |||
| ECS130US18 | XP Power | PSU 130W COMPACT OPEN FRAME (Alt: ECS130US18) RoHS : Compliant | 0 | |||
| SLB125S18C | Advanced Energy Industries Inc | (Alt: SLB125S18C) RoHS : Compliant | 0 | |||
| 406I35S18M43200 | CTS Corporation | - Tape and Reel (Alt: 406I35S18M43200) RoHS : Compliant | 0 | |||
| MTLW-107-05-G-S-185 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 7 Contacts Through Hole MTLW Series (Alt: MTLW-107-05-G-S-185) RoHS : Compliant | 0 | |||
| MTLW-102-05-G-S-185 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 2 Contacts Through Hole MTLW Series (Alt: MTLW-102-05-G-S-185) RoHS : Compliant | 0 | |||
| MTLW-106-07-G-S-189 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 6 Contacts Through Hole MTLW Series (Alt: MTLW-106-07-G-S-189) RoHS : Compliant | 0 | |||
| MTMM-102-05-S-S-180 | Samtec Inc | (Alt: MTMM-102-05-S-S-180) RoHS : Compliant | 0 | |||
| MTMM-103-06-G-S-180-002 | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 1 Rows 3 Contacts Through Hole MTMM Series (Alt: MTMM-103-06-G-S-180-002) RoHS : Compliant | 0 | |||
Avnet Asia | EYGS182307 | Panasonic Electronic Components | (Alt: EYGS182307) RoHS : Compliant | 50 | ||
| CCS-180719-01-MP | Samtec Inc | SATCCS-180719-01-MP CUSTOM HDR COMPONENT (Alt: CCS-180719-01-MP) RoHS : Compliant | 0 | |||
| 1SS187(TE85L,F) | Toshiba America Electronic Components | (Alt: 1SS187(TE85L,F)) RoHS : Compliant | 0 | |||
| PTS181224V110 | Eaton Corporation | SMD Resettable Fuse, PPTC, 1812 (4532 Metric), PTS1812, 24 VDC, 1.1 A, 2.2 A, 500 ms (Alt: PTS181224V110) RoHS : Compliant | 0 | |||
| LL41-GS18 | Vishay Intertechnologies | (Alt: LL41-GS18) RoHS : Compliant |
| 0 | ||
| PTS18126V260 | Eaton Corporation | (Alt: PTS18126V260) RoHS : Compliant | 0 | |||
| PTS18128V150 | Eaton Corporation | (Alt: PTS18128V150) RoHS : Compliant | 0 | |||
| LL4448-GS18 | Vishay Intertechnologies | (Alt: LL4448-GS18) RoHS : Compliant | 0 | |||
| LQG15HS18NJ02D | Murata Manufacturing Co Ltd | (Alt: LQG15HS18NJ02D) RoHS : Compliant | 0 | |||
| 1SS184,LF(T | Toshiba America Electronic Components | (Alt: 1SS184,LF(T) RoHS : Compliant | 0 | |||
| 1SS187,LF(T | Toshiba America Electronic Components | (Alt: 1SS187,LF(T) RoHS : Compliant | 0 | |||
| PTS181230V020 | Eaton Corporation | Resettable Fuse, PPTC, 1812 (4532 Metric), PolyTron PTS1812, 30 VDC, 200 mA, 400 mA, 0.02 s (Alt: PTS181230V020) RoHS : Compliant | 0 | |||
| AES-FM-S18 | AMD | (Alt: AES-FM-S18) RoHS : Not Compliant |
| 0 | ||
| TZMC39-GS18 | Vishay Intertechnologies | (Alt: TZMC39-GS18) RoHS : Compliant | 0 | |||
| LL4150GS18 | Vishay Intertechnologies | (Alt: LL4150GS18) RoHS : Compliant | 0 | |||
 Avnet Silica | PTVS18VP1UP,115 | Nexperia | TVS Diode PTVS Unidirectional 18 V 292 V SOD128 2 Pins (Alt: PTVS18VP1UP,115) RoHS : Compliant | 141,000 | ||
| LD1117S18CTR | STMicroelectronics | LDO Regulator Pos 18V 13A 4Pin3Tab SOT223 TR (Alt: LD1117S18CTR) RoHS : Compliant | 117,500 | |||
| TS1871AIYLT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AIYLT) RoHS : Compliant | 111,000 | |||
| TS1874IPT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IPT) RoHS : Compliant | 42,500 | |||
| LD1117S18TR | STMicroelectronics | Fixed LDO Voltage Regulator 15V in 11V Dropout 18V950mA out SOT2233 (Alt: LD1117S18TR) RoHS : Compliant | 42,500 | |||
| LD1117AS18TR | STMicroelectronics | LDO Regulator Pos 18V 1A 4Pin3Tab SOT223 TR (Alt: LD1117AS18TR) RoHS : Compliant | 30,000 | |||
| TS1874AIYPT | STMicroelectronics | Operational Amplifier RRIO 4 Channels 18 MHz 06 Vs 18V to 6V TSSOP 14 Pins (Alt: TS1874AIYPT) RoHS : Compliant | 12,500 | |||
| LDL1117S18R | STMicroelectronics | Fixed LDO Voltage Regulator 26 V to 18 V input 40 mV Dropout 18 V 12 A out SOT2234 (Alt: LDL1117S18R) RoHS : Compliant | 12,500 | |||
| TS1871AILT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871AILT) RoHS : Compliant | 9,000 | |||
| TS1872IDT | STMicroelectronics | OP Amp Dual GP RR IO 6V 8Pin SO N TR (Alt: TS1872IDT) RoHS : Compliant | 7,500 | |||
| TS1871ILT | STMicroelectronics | OP Amp Single GP RR IO 6V 5Pin SOT23 TR (Alt: TS1871ILT) RoHS : Compliant | 6,000 | |||
| TS1874IYPT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin TSSOP TR (Alt: TS1874IYPT) RoHS : Compliant | 2,500 | |||
| TS1874AIYDT | STMicroelectronics | OP Amp Quad GP RR IO 6V 14Pin SOIC TR (Alt: TS1874AIYDT) RoHS : Compliant | 2,500 | |||
| MCP23S18-E/MJ | Microchip Technology Inc | IO Expander 16 bit I2C Serial SPI 18 V 55 V QFN 24 Pins (Alt: MCP23S18-E/MJ) RoHS : Compliant | 91 | |||
| 71V25761S183PFGI | Renesas Electronics Corporation | (Alt: 71V25761S183PFGI) RoHS : Compliant | 72 | |||
 Braemac Americas-Symmetry | AMMLPDBLCS-18.4320T | Abracon Corporation |
| 0 | ||
| AMMLPEBLJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPFLAVRS-18.4320T | Abracon Corporation |
| 0 | |||
| 770-RPS1831-200G | DFI Inc | RPS183-H610EDB, 2 DDR5, Rear I/O (2 DP*++, 2 LAN, 2 USB 3.2 Gen2, 2 USB 2.0 Type A), Internal I/O (1 M.2 M/B/E Key, 1 eDP*, 1 HDMI*, 2 USB 3.2 Gen1, 1 USB 2.0 Type A), w/TPM, DC19~24V, -5 to 65 C |
| 0 | ||
ABLS-18.432MHZ-20-B-3-H-T | Abracon Corporation | CRYSTAL 18.4320MHZ 20PF SMD RoHS : Compliant |
| 0 | ||
| AMMLPEBVRS-18.4320T | Abracon Corporation |
| 0 | |||
| CFM600S180 | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| EC2645ETTTS-18.432M TR | Abracon Corporation | Standard Clock Oscillator 18.432MHz SMD 5.0mm x 7.0mm 50ppm -40C to +85C |
| 0 | ||
| AMMLPABVCS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPDBVJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPEBVCS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPFLBXJS-18.4320T | Abracon Corporation |
| 0 | |||
| AMMLPVBLJS-18.4320T | Abracon Corporation |
| 0 | |||
| CFM500S180-PC | Cincon Electronics Corporation | AC-DC AC-DC MODULES RoHS : Compliant |
| 0 | ||
| AMMLPDBVRS-18.4320T | Abracon Corporation |
| 0 | |||
 Chip-Germany GmbH | ABLS-18.432MHZ-B2-T | Abracon Corporation | 49 | |||
| WS18-3D460 | SICK AG | 1 | ||||
 Component Electronics, Inc | 1008CS-180XJLC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,750 | |
| DS1803Z-010-T/R | Dallas Semiconductor | IN STOCK SHIP TODAY |
| 1,510 | ||
| 1008LS-182XKBB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 900 | ||
| 1008CS-180XJBB | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 110 | ||
| SCS18B48-10.000MHZ | Suntsu Electronics Inc | IN STOCK SHIP TODAY |
| 100 | ||
| DS1833A | Dallas Semiconductor | IN STOCK SHIP TODAY | 64 | |||
| S1812R-474K | API Delevan | IN STOCK SHIP TODAY RoHS : Compliant |
| 56 | ||
| DS1867-100 | Dallas Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 34 | ||
| NAS1831A4B16 | IN STOCK SHIP TODAY | 28 | ||||
| MS18235-1BT | Dialight | IN STOCK SHIP TODAY |
| 20 | ||
| MTLW-140-05-T-S-185 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| Z8S18020VSC | Zilog Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| BM90-220S18-00 | Enargy Power Corporation | IN STOCK SHIP TODAY |
| 4 | ||
| S8VS-18024 | OMRON Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| MS18237-1 | Dialight | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | TPS-187-10 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly |
| 40,515 | |
| TPS-187-12 | PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly |
| 10,418 | ||
| NAS1829C3C12 | Military Specifications |
| 2,500 | |||
| SS182RF9C070L-24-02 | Tech-Etch | CLIP-ON CYLINDRICAL RADIUS | 7 | |||
| BOS-180 | Sugatsune Kogyo Co Ltd | 0 | ||||
| RS-1809-0562 | Heyco | RS 0187 OD X091 ID X562 LG NAT | 0 | |||
| 27XTS1870442 | Essentra Components | FIR TREE RIVET, .182-.192 HOLE | 0 | |||
| D4-A35T12DSS18PSNA | Southco | D4-A35T12DSS18PSNA | 0 | |||
| D4-A35T51DSS18PSNA | Southco | D4-A35T51DSS18PSNA | 0 | |||
| NAS1829C3A05 | RAF Electronic Hardware | 0 | ||||
| NAS1831AC3B04 | RAF Electronic Hardware | 3/16 FEMALE FEMALE STANDOFF | 0 | |||
| MSCBS-18-01 | Essentra Components | CB SptThrd MLMtrcNat1-1/8 in Spc | 0 | |||
| 010832S187 | Essentra Components | SET SCREW, SLOTTED HEAD, 8-32 | 0 | |||
| D4-A5T14DSS18PSNA | Southco | D4-A5T14DSS18PSNA | 0 | |||
| RS-1809-0750 | Heyco | RS 0187 OD X091 ID X750 LG NAT | 0 | |||
 EBV Elektronik | BAV103-GS18 | Vishay Intertechnologies | SWITCHING DIODE GENPURP SOD80 MINIMELF (Alt: BAV103-GS18) RoHS : Compliant | 5,970,000 | ||
| S07J-GS18 | Vishay Intertechnologies | (Alt: S07J-GS18) RoHS : Compliant | 3,320,000 | |||
| TZMC47-GS18 | Vishay Intertechnologies | (Alt: TZMC47-GS18) RoHS : Compliant | 840,000 | |||
| TZMC39-GS18 | Vishay Intertechnologies | (Alt: TZMC39-GS18) RoHS : Compliant | 230,000 | |||
| TZMC5V6-GS18 | Vishay Intertechnologies | (Alt: TZMC5V6-GS18) RoHS : Compliant | 150,000 | |||
| TZMC5V1-GS18 | Vishay Intertechnologies | (Alt: TZMC5V1-GS18) RoHS : Compliant | 80,000 | |||
| BZT55B9V1-GS18 | Vishay Intertechnologies | ZENER DIODE SOD80 QUADROMELF (Alt: BZT55B9V1-GS18) RoHS : Compliant | 80,000 | |||
| BAS81-GS18 | Vishay Intertechnologies | (Alt: BAS81-GS18) RoHS : Compliant | 40,000 | |||
| TZMC12-GS18 | Vishay Intertechnologies | (Alt: TZMC12-GS18) RoHS : Compliant | 40,000 | |||
| TZMB5V6-GS18 | Vishay Intertechnologies | (Alt: TZMB5V6-GS18) RoHS : Compliant | 30,000 | |||
| LL4448-GS18 | Vishay Intertechnologies | (Alt: LL4448-GS18) RoHS : Compliant | 20,000 | |||
| TZMC3V3-GS18 | Vishay Intertechnologies | (Alt: TZMC3V3-GS18) RoHS : Compliant | 20,000 | |||
| TS1852IST | STMicroelectronics | OP Amp Dual GP RR IO 6V 8Pin MSOP TR (Alt: TS1852IST) RoHS : Compliant | 8,000 | |||
| 1SS184(TE85L,F) | Toshiba America Electronic Components | Diode Switching 85V 03A 3Pin SMini TR (Alt: 1SS184(TE85L,F)) RoHS : Compliant | 3,000 | |||
| MCP23S18-E/SO | Microchip Technology Inc | IO Expander 28Pin SOIC W (Alt: MCP23S18-E/SO) RoHS : Compliant | 54 | |||
 FDH Electronics | MS18029-23 | Marco | Terminals & Spl |
| 630 | |
| MS3402DS18-1AZ | Corsair Electrical Connectors Inc | Connector |
| 98 | ||
| MS3402DS18-11P-LC | Corsair Electrical Connectors Inc | Connector |
| 35 | ||
| MS3402DS18-11PX | Corsair Electrical Connectors Inc | Connector |
| 35 | ||
| MS3402DS18-1E-LC | Corsair Electrical Connectors Inc | Connector |
| 28 | ||
| MS18029-6S-16 | R&B Electronics | Connector Acc |
| 25 | ||
| MS3402DS18-22EY-LC | Corsair Electrical Connectors Inc | Connector |
| 25 | ||
| MS3402DS18-3A | Corsair Electrical Connectors Inc | Connector |
| 22 | ||
| MS18029-6S-5 | MilSpec Products Inc | Connector Acc |
| 3 | ||
| MS18029-1S18 | R&B Electronics | Wire and Cable | 2 | |||
| MS18029-23 | Arvan Inc | Terminals & Spl |
| 1 | ||
| MS18029-6S-16 | Arvan Inc | Terminal Strip | 1 | |||
| MS18029-1S-18 | R&B Electronics | Wire and Cable |
| 0 | ||
| MS18029-23 | R&B Electronics | Wire and Cable |
| 0 | ||
| MS18029-6S-5 | R&B Electronics | Connector Acc |
| 0 | ||
 Flip Electronics | NCP160BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 160,000 | |
| Z8S18020VSG1960 | Littelfuse Inc | Stock, Ship Today | 25,586 | |||
| FAN2558S18X | onsemi | Stock, Ship Today RoHS : Compliant |
| 7,702 | ||
| NCP161BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,885 | ||
| Z8S18020VEG00TR | Littelfuse Inc | Stock, Ship Today | 4,550 | |||
NCP5663DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,400 | ||
| Z8S18010FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 2,126 | |||
| Z8S18010VSG | Littelfuse Inc | Stock, Ship Today | 1,675 | |||
| NCP59301DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 700 | ||
| NCP5663DS18G | onsemi | Stock, Ship Today RoHS : Compliant |
| 297 | ||
| Z8S18020VEG | Littelfuse Inc | Stock, Ship Today | 204 | |||
| Z8S18033FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 161 | |||
| EP2S180F1020C3 | Altera Corporation | Stock RoHS : Not Compliant | 10 | |||
| ICS80HCPS1848CHMI | Integrated Device Technology Inc | Stock | 4 | |||
| IDT80HCPS1848CHMI | Integrated Device Technology Inc | Stock | 4 | |||
 Maritex | FPV160808S180PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0603; 18VDC; 40pF RoHS : Compliant |
| 11,880 | |
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 330K | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x330K; 1/8W; 5% |
| 4,010 | ||
| WS18P6SMB | Cyg Wayon Circuit Protection Co Ltd | Transil Diode (TVS); 600W; 18V; 20.5A; unidirectional; -65+150 deg.C; SMD; DO214AA(SMB) RoHS : Compliant |
| 3,765 | ||
| ADBMS1818ASWZ-RL | Analog Devices Inc | Battery Management ICs; ADBMS1818ASWZ-RL; ANALOG DEVICES; 64 RoHS : Compliant |
| 3,627 | ||
| SIL RNL A TYPE, 9PINS 1/8W 5%, 8X 470K | Royal Electronic Factory (Thailand) Co Ltd | Resistor network; RA8x470K; 1/8W; 5% |
| 3,090 | ||
| FPV201209S180PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0805; 18VDC; 45pF RoHS : Compliant |
| 3,000 | ||
| DCPS1821W-CT | CONNTHERM | DC plug; female; inner diameter 2.1mm; outer diameter 5.5mm |
| 2,600 | ||
| MPZ1608S181ATDH5 | TDK Corporation | Ferrite Beads; MPZ1608S181ATDH5; TDK; 600 �m; 0603; 180 ?; 50 m? RoHS : Compliant |
| 1,029 | ||
| PLS18S-CT | CONNTHERM | Pin Header; pitch 2.54mm, 1x18 pins, assembly: THT; male; straight; single row |
| 1,000 | ||
| DCPS1810B-CT | CONNTHERM | DC plug; female; inner diameter 1.0mm; outer diameter 3.8mm |
| 980 | ||
| ZG05L2-4S-1.8HU/R | Hirose Electric Co Ltd | USB/DVI/HDMI Accessories; ZG05L2-4S-1.8HU/R; HIROSE ELECTRIC |
| 965 | ||
SN75ALS181NSR | Texas Instruments | Other Interface ICs; SN75ALS181NSR; TEXAS INSTRUMENTS; 14; 5.25 V; 4.75 V; SOP RoHS : Compliant |
| 490 | ||
| QOS1.8432MHZ-TTL/CMOS-5V-30PPM-DIL8-ROHS | Fronter Electronics Co Ltd | Quartz oscillator; 1.8432 MHz; 30ppm |
| 414 | ||
| EG-S180P24-2-V20W90 10W 6500K IP20 | NiViss | LED strip; Tile type; vertical&horizontal bending; cool white 6500K; CRI min. 90; 24V; 500x250 mm; 180LED/piece; 10 W; IP20; cut every 50mm/83.3mm; buttons entry; 0.5 m piece |
| 3 | ||
| DS18B20+T&R | Analog Devices Inc | Temperature Sensors; DS18B20+T&R; ANALOG DEVICES; 3; 9.4 mm; TO-92-3 RoHS : Compliant |
| 3 | ||
 Pasternack Enterprises US | PE39437/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE39437/HS-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE39437/HS-18 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE39437/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 434 | |
| PE3C0062LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0062LF/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C0062LF/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder. |
| 162 | ||
| PE3C0349/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Female Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMA male to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C0349/HS-18 can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C0349/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0349/HS-18 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 157 | ||
| PE3W17167/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17167/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17167/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17167/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17167/HS-180 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 64 | ||
| PE3W16752/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using TCOM-240 Coax with HeatShrink., Pasternack’s PE3W16752/HS-18 SMA male to SMA male RF cable assembly using TCOM-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W16752/HS-18 can also be known as an SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.312-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16752/HS-18 RF cable has a PE jacket of 0.24-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W16752/HS-18 SMA plug to SMA plug cable assembly is built with TCOM-240, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 14 | ||
| PE3W13564/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W13564/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W13564/HS-180 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink. |
| 0 | ||
| PE39423/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE39423/HS-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE39423/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W12044/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Smooth Bore SMP Male Bulkhead to 2.92mm Male Cable 18 Inch Length Using RG405 Coax with HeatShrink., Radio frequency assembly smooth bore SMP male bulkhead to 2.92mm male cable 18 inch length using RG405 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to 2.92mm male cable 18 inch length using RG405 coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and 2.92mm cable connection on the other. Our SMP to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3W12044/HS-18 can also be known as a SMP plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMP plug to 2.92mm plug cable assembly PE3W12044/HS-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP male bulkhead to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12044/HS-18 can also be used in the other direction and will be 2.92mm male to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this smooth bore SMP male bulkhead to 2.92mm male cable 18 inch length using RG405 coax with heatshrink. |
| 0 | ||
| PE3W09153/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female Right Angle to SMA Female Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMP female right angle to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMA cable connection on the other. Our right angle SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. PE3W09153/HS-18 can also be known as a right angle SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA jack cable assembly PE3W09153/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09153/HS-18 can also be used in the other direction and will be SMA female to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMA female cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 0 | ||
| PE3W12421/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. 7/16 DIN Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low loss 7/16 DIN to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W12421/HS-180 can also be known as a low loss 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3W12421/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12421/HS-180 can also be used in the other direction and will be N type male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink. |
| 0 | ||
| PE3W17134/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. N Male to N Male Cable 18 Inch Length Using TCOM-600 Coax with HeatShrink., Pasternack’s PE3W17134/HS-18 type N male to type N male RF cable assembly using TCOM-600 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17134/HS-18 can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.86-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17134/HS-18 RF cable has a PE jacket of 0.59-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. This PE3W17134/HS-18 type N plug to type N plug cable assembly is built with TCOM-600, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W07633LF/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to 3.5mm Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to 3.5mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to 3.5mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to 3.5mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and 3.5mm cable connection on the other. Our SMA to 3.5mm cable assemblies have a male gender on end 1 and male on end 2. PE3W07633LF/HS-18 can also be known as a SMA plug to 3.5mm plug cable assembly and will be shipped same-day as it is purchased. SMA plug to 3.5mm plug cable assembly PE3W07633LF/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to 3.5mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to 3.5mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07633LF/HS-18 can also be used in the other direction and will be 3.5mm male to SMA male cable assembly if the opposite connectivity is required. SMA plug to 3.5mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to 3.5mm cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to 3.5mm male cable 18 inch length using PE-SR402FLJ coax with heatshrink, LF solder. |
| 0 | ||
| PE3W17373/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. N Male to N Male Cable 18 Inch Length Using TCOM-600 Coax with HeatShrink., Pasternack’s PE3W17373/HS-18 type N male to type N male RF cable assembly using TCOM-600 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17373/HS-18 can also be known as a type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.81-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17373/HS-18 RF cable has a PE jacket of 0.59-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. This PE3W17373/HS-18 type N plug to type N plug cable assembly is built with TCOM-600, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. This type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W11930/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Reverse Polarity TNC Jack Bulkhead to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax with HeatShrink., Radio frequency assembly reverse polarity TNC jack bulkhead to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity TNC jack bulkhead to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and SMA cable connection on the other. Our reverse polarity TNC to SMA cable assemblies have a jack gender on end 1 and male on end 2. PE3W11930/HS-18 can also be known as a reverse polarity TNC female to SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC female to SMA plug cable assembly PE3W11930/HS-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable reverse polarity TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance. RF specs on this reverse polarity TNC jack bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11930/HS-18 can also be used in the other direction and will be SMA male to reverse polarity TNC jack bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity female bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC jack bulkhead to SMA male cable 18 inch length using PE-SR402FLJ coax with heatshrink. |
| 0 | ||
| PE3W10051/HS-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Mini SMP Female Right Angle to SMP Female Cable 18 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly mini SMP female right angle to SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMP cable connection on the other. Our right angle mini SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W10051/HS-18 can also be known as a right angle mini SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMP jack cable assembly PE3W10051/HS-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable Mini SMP cable assembly is manufactured with right angle mini SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency mini SMP right angle female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10051/HS-18 can also be used in the other direction and will be SMP female to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMP cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMP female cable 18 inch length using PE-SR405FLJ coax with heatshrink. |
| 0 | ||
 Relay Specialties | CBW57-HS-18A | OptiFuse | Thermal Circuit Breaker; 18 A 125/250 VAC; 32/50 VDC M11 x 1.0 |
| 122 | |
| MS188-903 | Stancor | STANCOR RELAY |
| 11 | ||
 TE Connectivity | WHDS-18-2 | TE Connectivity | STRAIN RELIEF, HD30, 18SZ, RA Primary Product Material: Steel Automotive Connector Accessory Type: Strain Relief Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Steel Strain Relief | Automotive Connector Accessories | Part Number: WHDS-18-2 | Internal Number: WHDS-18-2 | Alias Number: ZPF000000000131686 | TE Connectivity RoHS : Compliant |
| 944 | |
| WHDS-18-1 | TE Connectivity | STRAIN RELIEF, HD30, 18SZ, ST Primary Product Material: Steel Automotive Connector Accessory Type: Strain Relief Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Steel Strain Relief | Automotive Connector Accessories | Part Number: WHDS-18-1 | Internal Number: WHDS-18-1 | Alias Number: ZPF000000000131685 | TE Connectivity RoHS : Compliant |
| 288 | ||
| HSC100S18RJ | TE Connectivity | HSC100S 18R 5% Screw Terminal Resistance Value: 18 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 18 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S18RJ | Internal Number: 3-2176731-1 | TE Connectivity RoHS : Compliant |
| 22 | ||
| HSC150S18KJ | TE Connectivity | HSC150S 18K 5% Screw Terminal Resistance Value: 18K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminium Housed & Hsc | 18K Ω Wire Wound 5 % Power Resistor | Part Number: HSC150S18KJ | Internal Number: 6-2176732-4 | TE Connectivity RoHS : Compliant |
| 21 | ||
| HSC100S180RJ | TE Connectivity | HSC100S 180R 5% Screw Terminal Resistance Value: 180 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 180 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S180RJ | Internal Number: 4-2176731-3 | TE Connectivity RoHS : Compliant |
| 14 | ||
 Venkel Ltd. | WRFI0402-S-18NGT | VENKEL LTD | Wirewound RF Inductor;0402;18nH;�2% RoHS : Not Compliant | 16,000 | ||
| SHPI626650S-180MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI0402-S-18NJT | VENKEL LTD | Wirewound RF Inductor;0402;18nH;�5% RoHS : Not Compliant | 0 | |||
| WRFI0402-S-18NKT | VENKEL LTD | Wirewound RF Inductor;0402;18nH;�10% RoHS : Not Compliant | 0 | |||
| SHPI121245S-180MU | VENKEL LTD | Shielded High Power Inductor;121245;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI0603-S-18NGT-13 | VENKEL LTD | Wirewound RF Inductor;0603;18nH;�2% RoHS : Not Compliant | 0 | |||
| SHPI121245S-181MU | VENKEL LTD | Shielded High Power Inductor;121245;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| WRFI1008-S-18NKT | VENKEL LTD | Wirewound RF Inductor;1008;18nH;�10% RoHS : Not Compliant | 0 | |||
| SHPI121280S-181MU | VENKEL LTD | Shielded High Power Inductor;121280;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI626630S-181MU | VENKEL LTD | Shielded High Power Inductor;626630;Standard;180uH;�20% RoHS : Compliant | 0 | |||
| SHPI737334S-180MU | VENKEL LTD | Shielded High Power Inductor;737334;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121280S-180MU | VENKEL LTD | Shielded High Power Inductor;121280;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121210S-180MU | VENKEL LTD | Shielded High Power Inductor;121210;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| WRFI1008-S-18NJT | VENKEL LTD | Wirewound RF Inductor;1008;18nH;�5% RoHS : Not Compliant | 0 | |||
| SS18W-EVL | VENKEL LTD | Rectifier;SMA;80V;1A RoHS : Not Compliant | 0 | |||
 Vyrian | SN74ALS1805ANP3 | Texas Instruments | NOR Gate, TTL, PDIP20 RoHS : Not Compliant | 9,780 | ||
| SN54S189BW | Texas Instruments | Standard SRAM, 16X4, 50ns, TTL, CDFP16 RoHS : Not Compliant | 8,802 | |||
| SN74LS183FN3 | Texas Instruments | Adder/Subtractor, TTL, PQCC20 RoHS : Not Compliant | 8,420 | |||
| SNC54LS181J | Texas Instruments | Arithmetic Logic Unit, TTL, CDIP24 RoHS : Not Compliant | 7,944 | |||
| SNC54S189AW | Texas Instruments | Standard SRAM, 16X4, 50ns, TTL, CDFP16 RoHS : Not Compliant | 7,716 | |||
| SN74AS181BFN | Texas Instruments | Arithmetic Logic Unit, AS Series, 4-Bit, TTL, PQCC28 RoHS : Not Compliant | 7,062 | |||
| S8VS-18024 | OMRON Corporation | AC-DC Regulated Power Supply Module, 1 Output, 180W, Hybrid RoHS : Compliant | 6,727 | |||
| SN65LVDS180DRQ1 | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO14 RoHS : Compliant | 6,239 | |||
| SN74LS183NP3 | Texas Instruments | Adder/Subtractor, TTL, PDIP14 RoHS : Not Compliant | 6,007 | |||
SN74AS181ADWR | Texas Instruments | Arithmetic Logic Unit, AS Series, 4-Bit, Inverted Output, TTL, PDSO24 RoHS : Compliant | 5,443 | |||
| SN74ALS1808AN | Texas Instruments | AND Gate, ALS Series, 6-Func, 2-Input, TTL, PDIP20 RoHS : Not Compliant | 5,060 | |||
| SN74S181DWR | Texas Instruments | Arithmetic Logic Unit, S Series, 4-Bit, TTL, PDSO24 | 5,024 | |||
| SN54AS182FK | Texas Instruments | Look-Ahead Carry Generator, AS Series, 4-Bit, TTL, CQCC20 RoHS : Not Compliant | 4,304 | |||
| SN54AS1805J | Texas Instruments | NOR Gate, AS Series, 6-Func, 2-Input, TTL, CDIP20 RoHS : Not Compliant | 3,807 | |||
| BZD27C39P-GS18 | Vishay Intertechnologies | Zener Diode, 39V V(Z), 5.13%, 0.8W, Silicon, Unidirectional, DO-219AB RoHS : Compliant | 622 | |||
 Win Source Electronics | IS181D | Isocom Components | OPTOISO 3.75KV TRANS MINI-FLAT RoHS : Compliant |
| 311,504 | |
| DS18B20 | Nexperia | 11 B -55 ~ 125C 1-WIRE DIGITAL, |
| 160,000 | ||
| DS1804Z-010+ | Maxim Integrated Products | IC POT TRIMMER NV 10KOHM 8-SOIC / Digital Potentiometer 10kOhm 100POS Non-Volatile Linear 8-Pin SOIC N Tube RoHS : Compliant |
| 67,500 | ||
| DS18S20Z | Maxim Integrated Products | SENSOR TEMPERATURE 1-WIRE 8SOIC RoHS : Not Compliant |
| 46,560 | ||
| DS1822Z+T&R | Maxim Integrated Products | SENSOR TEMPERATURE 1-WIRE 8SOIC RoHS : Compliant |
| 42,980 | ||
| PTVS18VP1UP | Nexperia | 600 W Transient Voltage Suppressor RoHS : Compliant |
| 42,500 | ||
| DS1819AR-10/T&R | Maxim Integrated Products | IC SUPERVISOR 1 CHANNEL SOT23-5 RoHS : Not Compliant |
| 40,840 | ||
| LQG15HS18NJ02D | Murata Manufacturing Co Ltd | FIXED IND 18NH 400MA 360 MOHM RoHS : Compliant |
| 24,300 | ||
| DS18B20Z+T&R | Maxim Integrated Products | SENSOR TEMPERATURE 1-WIRE 8SOIC RoHS : Compliant |
| 19,860 | ||
| DS1841N+T&R | Maxim Integrated Products | IC RES LOG NV I2C 10-TDFN / Digital Potentiometer 3.6kOhm 128POS Non-Volatile Log 10-Pin TDFN EP T/R |
| 13,440 | ||
| DS1845E-010+ | Maxim Integrated Products | IC POT/MEM DUAL NV 10K 14-TSSOP RoHS : Compliant |
| 10,000 | ||
| DS1813R-5/T | Maxim Integrated Products |
| 4,670 | |||
SN75ALS180DRG4 | Texas Instruments | IC DIFF LINE DRVR/RCVR 14-SOIC RoHS : Compliant |
| 3,190 | ||
| DS1845E-010+T&R | Maxim Integrated Products | IC POT/MEM DUAL NV 10K 14-TSSOP / Digital Potentiometer 10kOhm 100/256POS Non-Volatile Linear 14-Pin TSSOP T/R RoHS : Compliant |
| 3,000 | ||
| AS186-302 | Skyworks Solutions Inc | IC RF SWITCH SPDT 4GHZ 8MSOP RoHS : Not Compliant |
| 719 | ||
 Wuhan P&S | SM8S18AHE3_A/I | Vishay Intertechnologies | Surface Mount Transient Voltage Suppressors RoHS : Compliant |
| 27,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand