 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
S180-WP-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Avnet Americas | SQS180ENW-T1_GE3 | Vishay Intertechnologies | Automotive N-Channel 40 V (D-S) 175C MOSFET PowerPAK 1212-8SLW - Tape and Reel (Alt: SQS180ENW-T1_GE3) RoHS : Not Compliant |
| 3,000 | |
| 600S180FW250XT | Kyocera AVX Components | - Tape and Reel (Alt: 600S180FW250XT) RoHS : Not Compliant |
| 2,000 | ||
ASPI-6045S-180M-T | Abracon Corporation | - Tape and Reel (Alt: ASPI-6045S-180M-T) RoHS : Compliant |
| 1,500 | ||
| 16SVPS180M | Panasonic Electronic Components | Polymer Aluminium Electrolytic Capacitor, 180 uF, 16 V, Radial Can - SMD, 0.029 ohm - Tape and Reel (Alt: 16SVPS180M) RoHS : Compliant |
| 1,000 | ||
| AHDPBS-18-002 | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: AHDPBS-18-002) RoHS : Compliant |
| 68 | ||
| TW-50-12-T-S-180-120 | Samtec Inc | Board Stackers & Spacers, Pin Header, 4.57 mm, 50 Contacts, Solder, 1 Rows, 2 mm, TW Series - Bulk (Alt: TW-50-12-T-S-180-120) RoHS : Compliant |
| 0 | ||
| RWR81S1800DSRSL | Vishay Intertechnologies | Through Hole Resistor, 180 ohm, RWR Series, 1 W, ? 0.5%, Axial Leaded, Wirewound, ? 20ppm/?C - Custom Tape W/Leader (Alt: RWR81S1800DSRSL) RoHS : Not Compliant |
| 0 | ||
| TCSD-05-S-18.00-01-F-N-P01-RW | Samtec Inc | - Bulk (Alt: TCSD-05-S-18.00-01-F-N-P01-RW) RoHS : Compliant | 0 | |||
| TCSD-12-S-18.00-01 | Samtec Inc | - Bulk (Alt: TCSD-12-S-18.00-01) RoHS : Compliant |
| 0 | ||
| SMRF3013S-180J | Gowanda Electronics Corporation | - Bulk (Alt: SMRF3013S-180J) RoHS : Not Compliant |
| 0 | ||
| M83723/82S18089(LC) | Amphenol Corporation | Circular Connector, MIL-DTL-83723 Series III, Wall Mount Receptacle, 8 Contacts, Threaded, 18-8 - Bulk (Alt: M83723/82S18089(LC)) RoHS : Not Compliant |
| 0 | ||
| M83723/84S1808Y(LC) | Amphenol Corporation | Circular Connector, MIL-DTL-83723 Series III, Jam Nut Receptacle, 8 Contacts, Threaded, 18-8, Gold - Bulk (Alt: M83723/84S1808Y(LC)) RoHS : Not Compliant |
| 0 | ||
| MCS1805GS-330-B-P | Monolithic Power Systems | Current Sensor, Hall Effect, Linear, Bidirectional, ? 2.5%, SOIC, 8 Pins - Tape and Reel (Alt: MCS1805GS-330-B-P) RoHS : Not Compliant |
| 0 | ||
| 17S180K | Gowanda Electronics Corporation | - Bulk (Alt: 17S180K) RoHS : Not Compliant |
| 0 | ||
| MCS1803GS-30-P | Monolithic Power Systems | Hall Effect-Based Linear Current Sensor IC ?30A 66mV/A 100kHz 8-Pin SOIC - Tape and Reel (Alt: MCS1803GS-30-P) RoHS : Compliant |
| 0 | ||
 Newark | MTLW-101-05-G-S-180 | Samtec Inc | PIN HEADER, BOARD-TO-BOARD, 1 ROWS; RoHS : Compliant |
| 3,650 | |
| MTLW-101-06-S-S-180 | Samtec Inc | PIN HEADER, BOARD-TO-BOARD, 1 ROWS; RoHS : Compliant |
| 2,591 | ||
| TW-02-02-T-S-180-095 | Samtec Inc | CONN STACK BRD, 2MM, 2POS, HDR; RoHS : Compliant |
| 1,390 | ||
| MTSW-106-07-T-S-180 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 6POS; RoHS : Compliant |
| 1,328 | ||
| MTMM-106-05-S-S-180 | Samtec Inc | HDR, BRD-TO-BRD, 2MM, 6POS; RoHS : Compliant |
| 855 | ||
| ASPI-6045S-180M-T | Abracon Corporation | POWER IND, 18UH, SHIELDED, 1.85A; RoHS : Compliant |
| 713 | ||
| ASPI-6045S-180M-T | Abracon Corporation | POWER IND, 18UH, SHIELDED, 1.85A; RoHS : Compliant |
| 713 | ||
| DS1803Z-050+ | Analog Devices Inc | DIGITAL POT, 50K, DUAL, NSOIC-16; RoHS : Compliant |
| 473 | ||
| MTLW-114-05-G-S-180 | Samtec Inc | HDR, BRD-TO-BRD, 2.54MM, 14POS; RoHS : Compliant |
| 439 | ||
| MTMM-121-03-T-S-180 | Samtec Inc | HDR, BRD-TO-BRD, 2MM, 21POS; RoHS : Compliant |
| 228 | ||
| MTMM-150-05-G-S-180 | Samtec Inc | HDR, BRD-TO-BRD, 2MM, 50POS; RoHS : Compliant |
| 186 | ||
| TW-20-02-T-S-180-090 | Samtec Inc | CONN STACK BRD, 2MM, 20POS, HDR; RoHS : Compliant |
| 135 | ||
| MTMM-130-04-T-S-180 | Samtec Inc | HDR, BRD-TO-BRD, 2MM, 30POS; RoHS : Compliant |
| 117 | ||
| MTS18008 | BlockMaster Blocks | EB 18P 3.50MM GREEN VERTICAL; RoHS : Compliant |
| 10 | ||
| EVCS1805-S-540-B-00A | Monolithic Power Systems | EVAL BOARD, CURRENT SENSOR, 5V, +/-40A; RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | DS1801E-014+ | Analog Devices Inc | Dual Audio Taper Potentiometer RoHS : Compliant |
| 9,607 | |
| DS1803Z-100+ | Analog Devices Inc | Addressable Dual Digital Poten RoHS : Compliant |
| 7,241 | ||
| DS1803Z-050+ | Analog Devices Inc | Addressable Dual Digital Poten RoHS : Compliant |
| 4,499 | ||
| DS18030-100+ | Analog Devices Inc | Addressable Dual Digital Poten RoHS : Compliant |
| 4,362 | ||
| DS1809U-010+ | Analog Devices Inc | Dallastat RoHS : Compliant |
| 3,618 | ||
| DS1804U-100+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 1,135 | ||
| ADBMS1804AWFSCCSZ | Analog Devices Inc | 12V car low voltage battery mo RoHS : Compliant | 1,125 | |||
| DS1804U-010+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 900 | ||
| DS1804Z-100+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 500 | ||
| DS1804U-050+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 446 | ||
| ADZS-180PWM-SAM | Analog Devices Inc | PWM/Memory 180-Pin Probing Boa |
| 16 | ||
| DS1803Z-050+T&R | Analog Devices Inc | Addressable Dual Digital Poten RoHS : Compliant |
| 0 | ||
| DS1809U-010+T&R | Analog Devices Inc | Dallastat RoHS : Compliant |
| 0 | ||
| ADBMS1804AWFSCCSZ-RL | Analog Devices Inc | 12V car low voltage battery mo RoHS : Compliant | 0 | |||
| ADBMS1804AWFSCCSZ-R7 | Analog Devices Inc | 12V car low voltage battery mo RoHS : Compliant | 0 | |||
 RS | S8VS-18024A (S8VS18024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 7.5A, 85-264V, ENCLOSED, PFC, 180W, S8VS SERIES |
| 8 | |
| ACS180-04S-12A6-4 (3AXD50000864768) | ABB Group | ACS150-03E-08A8-4 PN 4, 0KW, I2N 8, 8A IP20 |
| 8 | ||
| ACS180-04S-25A0-4 (3AXD50000864782) | ABB Group | AC DRIVE, 3-PHASE, 380-480V, 15HP, FRAME R3, ACS311, ACS310 SERIES |
| 6 | ||
| ACS180-04S-050A-4 (3AXD50000864829) | ABB Group | AC DRIVE, 3-PHASE, 380-480V, 30HP, FRAME R4, ACS311, ACS310 SERIES |
| 5 | ||
| NEBV-Z4WA2L-R-E-0.5-N-M8G3-S1 (8047683) | Festo | CONNECTING CABLE FIELD DEVICE TO CONTROLLER ZC 2/2 TO M8A 2/2 .5M |
| 5 | ||
| BAM00T3 (BOS 18,0-KB-1) | Balluff Inc | BALLUFF MOUNTING CLAMP FOR USE WITH 0-KB-1 BOS 18 M18 SENSOR |
| 4 | ||
| VES180PS12 | XP Power | POWER SUPPLY, AC-DC, EXTERNAL, DESKTOP, 180W, 12V@15A, 90-264V IN RoHS : Compliant |
| 3 | ||
| BAM00F8 (BES 18,0-KB-3-F) | Balluff Inc | BES - INDUCTIVE SENSOR ACCESSORIES, BES 18.0-KB-3-F |
| 3 | ||
| BAM00T0 (BOS 18,0-HW-3) | Balluff Inc | BOS - PHOTOELECTRIC SENSORS & ACCESSORIES, BOS 18.0-HW-3 |
| 2 | ||
| ACS180-04S-06A9-2 (3AXD50000858712) | ABB Group | MICRO DRIVE, 3-PHASE, 200VAC, 1HP, 03U, N1/IP21, FRAME R1, ACS150 SERIES |
| 2 | ||
| VPPM-12L-L-1-G12-0L10H-LK-S1 (8024266) | Festo | PROPORTIONAL-PRESSURE REGULATOR, 3 WAY, G1/2, 1-10 BAR REG RANGE, 7000L/MIN |
| 2 | ||
| 01002-7954 (XH25D-SS-1800-ABZC-28V/V-SM18) | BEI Sensors | ENCODER, INCREMENTAL, OPTICAL, 5-28VDC, 3/8" SHAFT, 1800 CYCLES/TURN, 2 CHANNEL |
| 2 | ||
| HWS1800T-24 (HWS1800T24) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,24V,75A,85-265V IN, ENCLOSED, PANEL MOUNT, PFC, HWS1800T SERIES |
| 1 | ||
| ACS180-04S-04A8-2 (3AXD50000857401) | ABB Group | MICRO DRIVE, 0.75HP, 03U, WALL MOUNT, N1/IP21, 200VAC, ACS150 SERIES |
| 1 | ||
| 01005-1218 (XH25D-SS-18000-T5-ABZC-28V/V-EM18) | BEI Sensors | ENCODER, INCREMENTAL, OPTICAL, 5-28VDC, 3/8" SHAFT, 18000 CYCLES/TURN, 2 CHANNEL |
| 1 | ||
 Microchip Technology Inc | MCP1826S-1802E/AB | Microchip Technology Inc | 1.0A LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 18,340 | |
| MCP1755S-1802E/MC | Microchip Technology Inc | 16v, 300 mA low quiescent current LDO with shutdown, DFN, Projected EOL: 2040-12-26 RoHS : Compliant |
| 17,100 | ||
| MCP1825S-1802E/AB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 15,150 | ||
| MCP1825S-1802E/DBVAO | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2051-01-09 RoHS : Compliant |
| 13,182 | ||
MCP1826S-1802E/EB | Microchip Technology Inc | 1.0A LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 11,200 | ||
MCP1827S-1802E/EB | Microchip Technology Inc | 1.5A LDO Regulator, DDPAK, Projected EOL: 2036-09-06 RoHS : Compliant |
| 9,850 | ||
| MCP1825S-1802E/EB | Microchip Technology Inc | 500MA LOW VOLTAGE, LOW IQ LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 5,000 | ||
MCP1826S-1802E/DB | Microchip Technology Inc | 1.0A LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 4,134 | ||
| MCP1825S-1802E/DB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 1,384 | ||
| MCP1827S-1802E/AB | Microchip Technology Inc | 1.5A LDO Regulator, TO-220, Projected EOL: 2036-09-06 RoHS : Compliant |
| 1,000 | ||
| TFS180H | Microchip Technology Inc | TFS180H, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| TFS180L | Microchip Technology Inc | TFS180L, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| TFS180N | Microchip Technology Inc | TFS180N, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| UPS180/TR13 | Microchip Technology Inc | Small-Signal Schottky _ 1 PMT (D0216), Projected EOL: 2051-02-02 RoHS : Compliant |
| 0 | ||
| PL611S-18-001 | Microchip Technology Inc | Programmable Clock, SOT-23, Projected EOL: 2044-08-04 - Contact for Pricing RoHS : Compliant | 0 | |||
 Rochester Electronics | BLC8G27LS-180AVY | NXP Semiconductors | RF Power Field-Effect Transistor, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 50 | |
SN65LVDS180PWG4 | Texas Instruments | IC INTERFACE Transceiver LVDS 150Mbps, 400Mbps 3V - 3.6V 14-SOP Tube RoHS : Compliant |
| 5 | ||
SN65LVDS180PWRG4Q1 | Texas Instruments | IC INTERFACE Transceiver LVDS 400Mbps 3V - 3.6V 14-SOP T/R RoHS : Compliant |
| 8,457 | ||
EP2S180F1020C5 | Altera Corporation | Field Programmable Gate Array, 71760 CLBs, 640MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Not Compliant |
| 320 | ||
| EP2S180F1508C3 | Altera Corporation | Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1508 RoHS : Not Compliant |
| 2 | ||
| BLC8G27LS-180AVY | Ampleon | RF Power Field-Effect Transistor, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 633 | ||
| BLC8G27LS-180AVZ | Ampleon | RF Power Field-Effect Transistor, 2-Element, S Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 115 | ||
| MPXS3015VMS180 | Freescale Semiconductor | Microcontroller, 32-Bit, FLASH, E200 CPU, 180MHz, CMOS, PBGA473 RoHS : Compliant |
| 468 | ||
DS1802+ | Maxim Integrated Products | Digital Potentiometer, 2 Func, 50000ohm, Push-button Control Interface, 65 Positions, PDIP20 RoHS : Compliant |
| 490 | ||
| DS1804X-100/T&R | Maxim Integrated Products | DS1804 NV Trimmer Potentiometer RoHS : Not Compliant |
| 4,392 | ||
| DS1806-010+ | Maxim Integrated Products | DS1806 Digital Sextet Potentiometer |
| 1,422 | ||
DS1806S-010 | Maxim Integrated Products | Digital Potentiometer, 1 Func, 10000ohm, 3-wire Serial Control Interface, 64 Positions, PDSO20 RoHS : Not Compliant |
| 913 | ||
| DS1806S-050+ | Maxim Integrated Products | DS1806 Digital Sextet Potentiometer RoHS : Compliant |
| 5,843 | ||
DS1809-100 | Maxim Integrated Products | Digital Potentiometer RoHS : Not Compliant |
| 71 | ||
| DZ2S180C0L | ROHM Semiconductor | Zener Diode RoHS : Compliant |
| 9,878,774 | ||
 Sager | TW-50-12-T-S-180-120 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 74 | |
| TW-15-02-F-S-180-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TCMD-05-S-18.00-01-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| TCSD-05-S-18.00-01-F-N-P01-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| TCSD-12-S-18.00-01 | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket Cable Assemblies, 2.00mm Pitch RoHS : Compliant |
| 0 | ||
| 59HS18-05-1-16S | Grayhill Inc | Rotary Switches Rotary Switch, Military, shaft/panel seal, 18°, 5 deck, 1 pole/deck, 16 position/pole, shorting RoHS : Compliant | 0 | |||
| IDSD-10-S-18.00-T | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDSD-13-S-18.00-G-ST2 | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDSS-08-S-18.00-T-ST8 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HCMD-05-S-18.00-01-ST3-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HCSD-07-S-18.00-01-N | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket and Terminal Cable Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HCSS-08-S-18.00-01-N | Samtec Inc | Ribbon Cables / IDC Cables IDC Socket and Terminal Cable Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDMD-02-S-18.00-G-ST4 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDMS-07-S-18.00-G | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Single-Row IDC Male Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDMS-32-S-18.00-G-ST2-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
 Coilcraft Direct | 0805CS-180XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 7,134 | |
| 0805CS-180XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 7,134 | ||
| 0805CS-180XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 4,099 | ||
| 0805CS-180XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 4,099 | ||
| 1206CS-180XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 2,793 | ||
| 1206CS-180XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, Halogen Free RoHS : Compliant |
| 2,793 | ||
| 1008CS-180XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 2,630 | ||
| 1008CS-180XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 2,630 | ||
| 1206CS-180XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, Halogen Free RoHS : Compliant |
| 2,385 | ||
| 1008CS-180XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,884 | ||
| 1206CS-180XJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, Halogen Free RoHS : Compliant |
| 978 | ||
| 0805HS-180TGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008HS-180TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, Halogen-Free RoHS : Compliant |
| 0 | ||
| 0805HS-180TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 1008CS-180XJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 0 | ||
 TME | MOF2WS-180K | SR Components Inc | Resistor: metal oxide; 180kΩ; THT; 2W; ±5%; 350V; Ø0.7x35mm; axial |
| 1,390 | |
| CFM500S180C | Cincon Electronics Corporation | Power supply: switching; open; 500W; 80÷264VAC; OUT: 1; 18VDC; 93.5% RoHS : Compliant |
| 5 | ||
| CS 180 | Eaton Corporation | Vent; A: 335mm; B: 214mm; C: 55mm; D: 69mm; E: 76mm; F: 29mm; G: 17mm |
| 3 | ||
| AHDPBS-18-002 | Amphenol Corporation | Connector: automotive RoHS : Compliant |
| 0 | ||
| BA-S 180806 F-7035 | Bopla | Enclosure: multipurpose; X: 86mm; Y: 199mm; Z: 60mm; BOCUBE ALU; grey |
| 0 | ||
| BV302S18015 | ZETTLER Magnetics Inc | Transformer: encapsulated; 1.5VA; 230VAC; 18V; 83mA; PCB |
| 0 | ||
| FS-1,80-RD-07-02-G | Ingun Prufmittelbau GmbH | Assembly stud; L: 14mm; H: 7mm; Ø: 1.8mm; FS-ST; plug-in |
| 0 | ||
| CF1WS-180R | SR Components Inc | Resistor: carbon film; 180Ω; THT; 1W; ±5%; 500V; Ø0.6x26mm; Ø3.2x9mm |
| 0 | ||
| AHDPBS-18-001 | Amphenol Corporation | Connector: automotive RoHS : Compliant |
| 0 | ||
| DS1804-050+ | Analog Devices Inc | IC: digital potentiometer; Up/Down Protocol; 50kΩ; 7bit; DIP8; THT RoHS : Compliant |
| 0 | ||
| DS1809Z-010+ | Analog Devices Inc | IC: digital potentiometer; Up/Down Protocol; 10kΩ; 6bit; SO8; SMD RoHS : Compliant |
| 0 | ||
| FFMD-05-S-18.00-01 | Samtec Inc | Ribbon cable with IDC connectors; IDC plug,cables; PIN: 10; 18" RoHS : Compliant |
| 0 | ||
| FFMD-18-S-18.00-01 | Samtec Inc | Ribbon cable with IDC connectors; IDC plug,cables; PIN: 36; 18" RoHS : Compliant |
| 0 | ||
| OPD-S18012LY-BW | Opto Plus LED Corporation | Display: LED; 7-segment; 45mm; 1.8"; No.char: 1; yellow; 180mcd |
| 0 | ||
| OPD-S18013LY-BW | Opto Plus LED Corporation | Display: LED; 7-segment; 45mm; 1.8"; No.char: 1; yellow; 180mcd |
| 0 | ||
 ComSIT USA | 600S180FT250XT | AMERICAN TECHNICAL CERAMICS/AVX/KYOCERA AVX | AVAILABLE EU | 1,496 | ||
ComSIT USA | DZ2S18000L | Panasonic Electronic Components | SILICON EPITAXIAL PLANAR TYPE ZENER DIODE Zener Diode, 18V V(Z), 5%, 0.15W, Silicon, Unidirectional RoHS : Compliant | 15,000 | ||
| DS1803E100+T | Maxim Integrated Products | Pot Digital 2 Element 256 POS 100 kOhm 2.7V �20% 14-SOP T/R RoHS : Compliant | 1,850 | |||
| DS1803Z010+TR | Maxim Integrated Products | Pot Digital 2 Element 256 POS 10 kOhm 2.7V �20% 16-SOIC T/R RoHS : Compliant | 1,710 | |||
SN65ALS180DR | Texas Instruments | DIFFERENTIAL DRIVER AND RECEIVER PAIR Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO14 RoHS : Not Compliant | 1,330 | |||
| SDS180PS12 | XP Power | AC-DC Regulated Power Supply Module RoHS : Not Compliant | 366 | |||
| DS1803E100+ | Maxim Integrated Products | Pot Digital 2 Element 256 POS 100 kOhm 2.7V �20% 14-SOP Tube RoHS : Compliant | 324 | |||
| DS1804L+ | Maxim Integrated Products | Electronic Component RoHS : Compliant | 222 | |||
| HKC3330S18000LF | hkc | Electronic Component RoHS : Compliant | 146 | |||
Z8S18020VSC | Zilog Inc | ENHANCED MICROPROCESSOR WITH FASTER EXECUTION, POWER-SAVER MODE, LOW EMI Microprocessor, 8-Bit, 20MHz, CMOS, PQCC68 RoHS : Not Compliant | 112 | |||
| 3146110828S1808456HC | Electro Adapter Inc | Electronic Component RoHS : Not Compliant | 20 | |||
| RCEC400GS1802JB | Vishay Intertechnologies | POWER RESISTOR Fixed Resistor, Metal Glaze/thick Film, 400W, 18000ohm, 4000V, 5% +/-Tol, 150ppm/Cel, Chassis Mount RoHS : Not Compliant | 20 | |||
| EP2S180F1508C3N | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 8970 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1508 RoHS : Compliant | 12 | |||
| EP2S180F1020C4N | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Compliant | 5 | |||
| EP2S180F1020C4 | al | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Not Compliant | 1 | |||
| EP2S180F1020I4 | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Not Compliant | 1 | |||
 Interstate Connecting Components | M83723/82S1808Y L/C | Conesys | WALL MT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | |
| M83723/97S18087 L/C | Conesys | SELF LOCK, RFI PLUG, SOCKET, 83723 SIII |
| 0 | ||
| 983-0RS 18-02 PN-L | TE Connectivity | 983-0RS 18-02 PN-L | 0 | |||
| 983-6S 18-02 S6 A1208 | TE Connectivity | 983-6S 18-02 S6 A1208 | 0 | |||
| 983-6S 18-08 SN | TE Connectivity | 983-6S 18-08 SN | 0 | |||
| 121-195-28BELLP-S-180 | Glenair Inc | EMI/RFI HARSH CHEMICAL ENVIRO INTERNAL BRAID | 0 | |||
| M83723/82S18087 | Conesys | WALL MT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/98S1808N | Conesys | SELF LOCK RFI PLUG, PIN, 83723 SIII THRE |
| 0 | ||
| 85333ES1802S6126 | SOURIAU-SUNBANK | J6203 | 0 | |||
| M83723/82S18086 | Conesys | WALL MT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/83S1808Y L/C | Conesys | WALL MT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| MS18062C40 | Amphenol Aerospace | SHELL, DUMMY | 0 | |||
| M83723/84S18089 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/82S18087 L/C | Conesys | WALL MT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/84S1808Y | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
 NexGen Digital | 1008CS-180KXBC | Coilcraft Inc | 1,991 | |||
| 0805CS180XJBC | Coilcraft Inc | 933 | ||||
| ATC600S180GT250 | American Technical Ceramics Corp | 82 | ||||
 PEI Genesis | 85333ES1808PN | SOURIAU-SUNBANK |
| 25 | ||
| 85330RS1808PNL | SOURIAU-SUNBANK |
| 20 | |||
| S1802-07-1.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| 06A1001S1804CN3 | SOURIAU-SUNBANK |
| 0 | |||
| AE83398S1808N | Aero-Electric Connector Inc |
| 0 | |||
| 06A1012S1804CN2 | SOURIAU-SUNBANK |
| 0 | |||
| 06A1024S1806CN5 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-04-1.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-13-1.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| M83723/98S1808N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| S1802-04-2.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-13-2.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| S5172FS1803A1.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| AE83398S18088 | Aero-Electric Connector Inc |
| 0 | |||
| S1802-04-1.0-4 | SOURIAU-SUNBANK |
| 0 | |||
 Richardson RFPD | TS180M-50W | Spectrum Control | TERMINATIONS SMA, UP TO 18 GHZ, 50WATTS RoHS : Not Compliant |
| 10 | |
| 600S180FT250T4K | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 1% Pad SMD 0603 125C T/R RoHS : Compliant | 0 | |||
| 600S180FT250X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
| 600S180GT250T\\4K | Kyocera AVX Components | Multilayer Ceramic Chip RF and Microwave Capacitor RoHS : Compliant | 0 | |||
| TS180M-25W | Spectrum Control | Terminations Sma, Up To 18 Ghz, 25Watts RoHS : Compliant |
| 0 | ||
| 600S180FW250XT\\4K | Kyocera AVX Components | Multilayer Ceramic Chip RF and Microwave Capacitor | 0 | |||
| 600S180JT250XT\\4K | Kyocera AVX Components | Multilayer Ceramic Chip RF and Microwave Capacitor RoHS : Compliant | 0 | |||
| 600S180FW250T | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 1% Pad SMD 0603 125C Ult RoHS : Not Compliant | 0 | |||
| S21S180D15JN | Tamura Corporation of America | Hall Effect Current S RoHS : Compliant |
| 0 | ||
| 600S180KT250XT | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 10% Pad SMD 0603 125C Ul RoHS : Compliant | 0 | |||
| CCR-38S180 | Teledyne Relays | RF Switch SP8T 0MHz to 12GHz 60dB RoHS : Compliant |
| 0 | ||
| TS180X-50W | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| 600S180JT250X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
| 600S180GT250T | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 2% Pad SMD 0603 125C Ult RoHS : Compliant | 0 | |||
| 600S180GT250XT | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 2% Pad SMD 0603 125C Ult RoHS : Compliant | 0 | |||
 Chip 1 Exchange | 1008CS-180-XKBC | INSTOCK | 16,000 | |||
| MF60SS-180F-A5 | ASJ Holdings Limited | INSTOCK | 10,000 | |||
| S1803C-60.000 | INSTOCK | 7,917 | ||||
| IS180 | Isocom Components | INSTOCK RoHS : Unknown | 5,785 | |||
| 251R14S180GV4T | JOHNS | INSTOCK | 3,195 | |||
| Z8S18010FSC | INSTOCK | 2,521 | ||||
| 0805CS180XGBC | Coilcraft Inc | INSTOCK | 2,000 | |||
| 805CS-180XJBC | INSTOCK | 1,123 | ||||
| SN65ALS180DR | Texas Instruments | INSTOCK RoHS : Compliant | 818 | |||
| SN75ALS180D# | Texas Instruments | INSTOCK | 500 | |||
| 0805CS-180XGLC | INSTOCK | 433 | ||||
| SN74AS1805N | INSTOCK | 172 | ||||
| DS1804Z-100 | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 49 | |||
Z8S18020FSC | Zilog Inc | INSTOCK RoHS : Not Compliant | 48 | |||
| DS1802 | INSTOCK | 37 | ||||
 Avnet Abacus | ATBS-PS-1805 | Amphenol Corporation | Backshell for T1618PSX and AT1615PSX Series 1518 Position HeavyDuty Connectors 18 Shell Size ST Thermoplastic (Alt: ATBS-PS-1805) RoHS : Compliant | 1,050 | ||
| ATS180A | CTS Corporation | (Alt: ATS180A) RoHS : Compliant | 0 | |||
| MF-LS180S | Bourns Inc | (Alt: MF-LS180S) RoHS : Compliant | 0 | |||
| DZ2S180C0L | Panasonic Electronic Components | ZENER DIODE BIDIRECTIONAL SURGE ABSORPTION VZ18V (Alt: DZ2S180C0L) RoHS : Compliant | 0 | |||
| TRS1-80MCR01V | KEMET Corporation | (Alt: TRS1-80MCR01V) RoHS : Compliant | 0 | |||
| NPI43LS180MTRF | NIC Components Corp | Power Inductor SMD 18 uH 20 920 mA Unshielded 182 A 4mm x 4mm x 3mm (Alt: NPI43LS180MTRF) RoHS : Compliant | 0 | |||
| NPIS84LS180MTRF | NIC Components Corp | - Tape and Reel (Alt: NPIS84LS180MTRF) RoHS : Compliant | 0 | |||
| S180J33SL0R63K7R | Vishay Intertechnologies | (Alt: S180J33SL0R63K7R) RoHS : Compliant | 0 | |||
| TRJA106M010S1800 | Kyocera AVX Components | Surface Mount Tantalum Capacitor 10 uF 10 V 20 55 C 125 C 1206 321618 Metric (Alt: TRJA106M010S1800) RoHS : Compliant | 0 | |||
| S180J25SL0N6UJ5R | Vishay Intertechnologies | (Alt: S180J25SL0N6UJ5R) RoHS : Compliant | 0 | |||
| TPSA685K006S1800 | Kyocera AVX Components | - Tape and Reel (Alt: TPSA685K006S1800) RoHS : Compliant | 0 | |||
| ASPI-6045S-180M-T | Abracon Corporation | - Tape and Reel (Alt: ASPI-6045S-180M-T) RoHS : Compliant | 0 | |||
| ZF5S-18-03-T-WT-TR | Samtec Inc | (Alt: ZF5S-18-03-T-WT-TR) RoHS : Compliant | 0 | |||
| MTMM-112-06-L-S-180 | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 1 Rows 12 Contacts Through Hole MTMM Series (Alt: MTMM-112-06-L-S-180) RoHS : Compliant | 0 | |||
| AECS1806D07ZS-3000S | Abracon Corporation | External Antenna Shark Fin Multi Band 76MHz108MHz 1561GHz 1602GHz 171GHz 269GHz (Alt: AECS1806D07ZS-3000S) RoHS : Compliant | 0 | |||
Avnet Asia | CCS-180719-01-MP | Samtec Inc | SATCCS-180719-01-MP CUSTOM HDR COMPONENT (Alt: CCS-180719-01-MP) RoHS : Compliant | 0 | ||
| NCP163AFCS180T2G | onsemi | LDO Regulator, 250 mA, Ultra-High PSRR, Ultra-Low Noise 1.8 V, Active Discharge. ONSSPCLDO; (Alt: NCP163AFCS180T2G) RoHS : Compliant | 0 | |||
| NCP161AFCS180T2G | onsemi | LDO Regulator, 450 mA, Ultra-High PSRR, Ultra-Low Noise 1.8V, Active Discharge. ONSSPCLDO; (Alt: NCP161AFCS180T2G) RoHS : Compliant | 0 | |||
251R14S180JV4T | Johanson Technology Inc | Cap Ceramic 18pF 250V C0G 5% SMD 0603 125?C Paper T/R (Alt: 251R14S180JV4T) RoHS : Compliant | 0 | |||
| 16SVPS180M | Panasonic Electronic Components | Polymer Aluminium Electrolytic Capacitor, 180 uF, 16 V, Radial Can - SMD, 0.029 ohm (Alt: 16SVPS180M) RoHS : Compliant | 0 | |||
 Avnet Silica | MCS1803GS-50 | Monolithic Power Systems | (Alt: MCS1803GS-50) RoHS : Compliant | 0 | ||
| MCS1803GS-30-P | Monolithic Power Systems | Hall EffectBased Linear Current Sensor IC 30A 66mVA 100kHz 8Pin SOIC (Alt: MCS1803GS-30-P) RoHS : Compliant | 0 | |||
| MCS1802GS-30-P | Monolithic Power Systems | Hall EffectBased Linear Current Sensor IC 30A 44mVA 100kHz 8Pin SOIC (Alt: MCS1802GS-30-P) RoHS : Compliant | 0 | |||
| MCS1802GS-05-P | Monolithic Power Systems | Hall EffectBased Linear Current Sensor IC 5A 264mVA 100kHz 8Pin SOIC (Alt: MCS1802GS-05-P) RoHS : Compliant | 0 | |||
| MCS1802GS-50-P | Monolithic Power Systems | Hall EffectBased Linear Current Sensor IC 50A 264mVA 100kHz 8Pin SOIC (Alt: MCS1802GS-50-P) RoHS : Compliant | 0 | |||
| MCS1806GS-5-30-P | Monolithic Power Systems | Current Sensor SOIC 8 Pins (Alt: MCS1806GS-5-30-P) RoHS : Compliant | 0 | |||
| NCP163BFCS180T2G | onsemi | LDO Regulator 250 mA UltraHigh PSRR UltraLow Noise 18 V NonActive Discharge (Alt: NCP163BFCS180T2G) RoHS : Compliant | 0 | |||
| MCS1806GS-3-20-Z | Monolithic Power Systems | Current Sensor 25 20A 100kHz 8Pin SOIC TR (Alt: MCS1806GS-3-20-Z) RoHS : Compliant | 0 | |||
| EV10AS180AMGSD/T | Teledyne HiRel | Analog to Digital Converter 10 bit Pipelined 15 GSPS Differential Single Ended LVDS (Alt: EV10AS180AMGSD/T) RoHS : Compliant | 0 | |||
| MCS1806GS-3-10-P | Monolithic Power Systems | Current Sensor SOIC 8 Pins (Alt: MCS1806GS-3-10-P) RoHS : Compliant | 0 | |||
| MCS1805GS-330-B-Z | Monolithic Power Systems | LINEAR HALLEFFECT CURRENT SENSOR WITH OCD3KVRMS ISOLATION (Alt: MCS1805GS-330-B-Z) RoHS : Compliant | 0 | |||
| MCS1805GS-310-B-P | Monolithic Power Systems | Current Sensor Hall Effect Linear Bidirectional 25 SOIC 8 Pins (Alt: MCS1805GS-310-B-P) RoHS : Compliant | 0 | |||
| MCS1805GS-320-U-Z | Monolithic Power Systems | (Alt: MCS1805GS-320-U-Z) RoHS : Compliant | 0 | |||
| MCS1805GS-520-B-Z | Monolithic Power Systems | (Alt: MCS1805GS-520-B-Z) RoHS : Compliant | 0 | |||
| CS18056_VICTORIA-MINI-WWW-PC | LEDIL | LED Lens Cover 90 Wide Beam Polycarbonate 180mm x 108mm Box (Alt: CS18056_VICTORIA-MINI-WWW-PC) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | 251R14S180GV4T | Johanson Dielectrics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 44,000 | |
| 0805CS-180XJLC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,706 | ||
| 1008CS-180XJBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 3,800 | |||
| 1008CS-180XJLC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,750 | ||
500R07S180GV4T | Johanson Dielectrics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 750 | ||
| 0805CS-180XGBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 150 | |||
| EGS-1-80-649R-1% | Vishay Dale | IN STOCK SHIP TODAY |
| 100 | ||
| EGS-1-80-.732-1%B12 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 100 | ||
| EGS-1-80-0.499R-1% | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 47 | ||
| LS1808N102K302NX | Novacap | IN STOCK SHIP TODAY |
| 33 | ||
| RWR81S1800FM | Vishay Dale | IN STOCK SHIP TODAY RoHS : Unknown |
| 28 | ||
| MS18029-11S-8 | ARVAN | IN STOCK SHIP TODAY |
| 19 | ||
| DS1804-010 | Dallas Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant | 14 | |||
| BM90-220S18-00 | Enargy Power Corporation | IN STOCK SHIP TODAY |
| 4 | ||
| MP2-S180-51P1-TR30 | 3M | IN STOCK SHIP TODAY | 3 | |||
 DB Roberts | NAS1801-04-5 | Military Specifications |
| 12,822 | ||
| NAS1801-3-10 | Military Specifications |
| 272 | |||
| NAS1802-08-10.D | Military Specifications | SCREW DFARS COMPLIANT REQUIRED |
| 227 | ||
| NAS1802-06-6 | Military Specifications |
| 29 | |||
| NAS1801-06-15 | Military Specifications |
| 10 | |||
| S-180-5 | Shercon Inc |
| 1 | |||
| RS-1809-1000 | Heyco | RS 0187 OD X091 IDX1000 LG NAT | 0 | |||
| S-180-8 | Shercon Inc | S HOOK .180 X 8 250/BAG | 0 | |||
| RS-1809-0687 | Heyco | RS 0187 OD X091 ID X687 LG NAT | 0 | |||
| RS-1809-0812 | Heyco | RS 0187 OD X091 ID X812 LG NAT | 0 | |||
| CA-1032S-180 | SHEREX FASTENING SO | 10-32 | 0 | |||
| RS-1809-0750 | Heyco | RS 0187 OD X091 ID X750 LG NAT | 0 | |||
| BOS-180 | Sugatsune Kogyo Co Ltd | 0 | ||||
| S-180-14 | Shercon Inc | 250 PER BOX | 0 | |||
| RS-1809-0375 | Heyco | RS 0187 OD X091 ID X375 LG NAT | 0 | |||
 EBV Elektronik | SS18-0B00-00 | Broadcom Limited | Switch Fabric SMT PCIe PEX9700 Series 33 Lanes 9 Ports 2 HotPlug Controllers (Alt: SS18-0B00-00) RoHS : Compliant | 0 | ||
| VS-180NQ045PBF | Vishay Intertechnologies | Modules Rectifiers HALFPAK SK (Alt: VS-180NQ045PBF) RoHS : Compliant | 0 | |||
| UFS180JE3/TR13 | Microchip Technology Inc | (Alt: UFS180JE3/TR13) RoHS : Compliant | 0 | |||
| NCP163AFCS180T2G | onsemi | LDO Regulator 250 mA UltraHigh PSRR UltraLow Noise 18 V Active Discharge ONSSPCLDO (Alt: NCP163AFCS180T2G) RoHS : Compliant | 0 | |||
| NCP161AFCS180T2G | onsemi | LDO Regulator 450 mA UltraHigh PSRR UltraLow Noise 18V Active Discharge ONSSPCLDO (Alt: NCP161AFCS180T2G) RoHS : Compliant | 0 | |||
| SQS180ENW-T1_GE3 | Vishay Intertechnologies | Automotive NChannel 40 V DS 175C MOSFET PowerPAK 12128SLW (Alt: SQS180ENW-T1_GE3) RoHS : Compliant | 0 | |||
| MCP1826S-1802E/AB | Microchip Technology Inc | (Alt: MCP1826S-1802E/AB) RoHS : Compliant | 0 | |||
| SQS180ELNW-T1_GE3 | Vishay Intertechnologies | (Alt: SQS180ELNW-T1_GE3) RoHS : Compliant | 0 | |||
| MCP1826S-1802E/DB | Microchip Technology Inc | (Alt: MCP1826S-1802E/DB) RoHS : Compliant | 0 | |||
| MCP1825S-1802E/DB | Microchip Technology Inc | LDO Regulator Pos 18V 05A 4Pin3Tab SOT223 Tube (Alt: MCP1825S-1802E/DB) RoHS : Compliant | 0 | |||
| CS18048_HB-IP-24-W | LEDIL | LED Lens Cover 60 Wide Beam PMMA 173mm x 714mm x 10mm Box (Alt: CS18048_HB-IP-24-W) RoHS : Compliant | 0 | |||
| CS18047_HB-IP-24-M | LEDIL | LED Lighting Multi Lens 30 Wide Beam PMMA 173mm x 714mm x 10mm Box (Alt: CS18047_HB-IP-24-M) RoHS : Compliant | 0 | |||
| CS18049_HB-IP-24-WWW | LEDIL | MultiLens For Use With For Use With J Series 5050 Round LESLUXEON 5050 Square LESDuris S8SEOUL (Alt: CS18049_HB-IP-24-WWW) RoHS : Compliant | 0 | |||
| 6PS18012E4FG38393NWSA1 | Infineon Technologies AG | (Alt: SP001054242) RoHS : Not Compliant | 0 | |||
| CS18051_STRADA-IP-24-DWC | LEDIL | LED Lens Array 173mm x 71mm x 9mm Polycarbonate Box (Alt: CS18051_STRADA-IP-24-DWC) RoHS : Compliant | 0 | |||
 FDH Electronics | 983-7S18-08SN-L | TE Connectivity | Connector |
| 92 | |
| MS18029-3S-6 | Marco | Connector Acc |
| 54 | ||
| MS18029-6S-3 | R&B Electronics | Connector Acc |
| 27 | ||
| MS18029-6S-14 | Marco | Connector Acc | 10 | |||
| MS18029-11S-14 | R&B Electronics | Connector Acc |
| 5 | ||
| MS18029-1L8 | Arvan Inc | Backshells & Ac | 3 | |||
| MS18029-21 | Arvan Inc | Terminals & Spl |
| 2 | ||
| MS18029-5L-4 | R&B Electronics | Wire and Cable | 0 | |||
| MS18029-1S-8 | R&B Electronics | Wire and Cable | 0 | |||
| MS18029-21 | R&B Electronics | Wire and Cable | 0 | |||
| MS18029-6S-14 | R&B Electronics | Wire and Cable | 0 | |||
| MS18029-1S-11 | R&B Electronics | Wire and Cable | 0 | |||
| MS18029-4L-4 | R&B Electronics | Connector Acc |
| 0 | ||
| MS18029-2L-6 | R&B Electronics | Connector Acc |
| 0 | ||
| MS18029-2S-10 | R&B Electronics | Wire and Cable | 0 | |||
 Flip Electronics | NCP161AFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant | 200,000 | ||
| NCP160BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 160,000 | ||
| Z8S18020VSG1960 | Littelfuse Inc | Stock, Ship Today | 25,586 | |||
| NCP161BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,885 | ||
| Z8S18020VEG00TR | Littelfuse Inc | Stock, Ship Today | 4,550 | |||
| Z8S18010VEG | Littelfuse Inc | Stock, Ship Today | 2,375 | |||
| Z8S18010FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 2,126 | |||
| Z8S18010VSG | Littelfuse Inc | Stock, Ship Today | 1,675 | |||
| Z8S18020FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 725 | |||
| Z8S18010FEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 305 | |||
| Z8S18020VEG | Littelfuse Inc | Stock, Ship Today | 204 | |||
| Z8S18033FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 161 | |||
| EP2S180F1020C3 | Altera Corporation | Stock RoHS : Not Compliant | 10 | |||
 Master Electronics | TW-02-02-S-S-180-095 | Samtec Inc | RoHS : Compliant |
| 0 | |
| TW-03-01-L-S-180-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-03-02-T-S-180-075 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-05-02-T-S-180-SM-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-05-09-F-S-180-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-10-12-T-S-180-070 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-13-02-G-S-180-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-15-02-F-S-180-090 | Samtec Inc | Conn Board Stacker HDR 15 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| TCMD-05-S-18.00-01-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCSD-08-S-18.00-01-N-P01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TCSD-12-S-18.00-01 | Samtec Inc | IDC SOCKET CABLE ASSEMBLI RoHS : Compliant |
| 0 | ||
| TCSD-16-S-18.07-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-31-02-G-S-180-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-50-12-T-S-180-120 | Samtec Inc | Board Stackers & Spacers Pin Header 4.57 mm 50 Contacts Solder 1 Rows 2 mm TW Series RoHS : Compliant |
| 0 | ||
| T2SDT-05-24-S-18.00-D-NUS | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C0112/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0112/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0112/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0112/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 376 | |
| PE3C0062/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0062/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0062/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink. |
| 166 | ||
| PE3C0062LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0062LF/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C0062LF/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder. |
| 166 | ||
| PE3C10780/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600-FR Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C10780/HS-180 low loss type N male to right angle type N male RF cable assembly using LMR-600-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C10780/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10780/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. This PE3C10780/HS-180 type N plug to type N plug cable assembly is built with LMR-600-FR, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 180-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C10780/HS-180 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. This low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 160 | ||
| PE3W17710/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to 4.3-10 Male Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17710/HS-180 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17710/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17710/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17710/HS-180 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 32 | ||
| PE3W12421/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. 7/16 DIN Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low loss 7/16 DIN to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W12421/HS-180 can also be known as a low loss 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3W12421/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12421/HS-180 can also be used in the other direction and will be N type male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink. |
| 0 | ||
| PE3C1548/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1548/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C1548/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink. |
| 0 | ||
| PE3C1548LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C1548LF/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C1548LF/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder. |
| 0 | ||
| PE3W05445LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Female to N Female Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink, LF Solder., Radio frequency assembly N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a female gender on end 1 and female on end 2. PE3W05445LF/HS-180 can also be known as a low loss type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. N type jack to type N jack cable assembly PE3W05445LF/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type female to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder. |
| 0 | ||
| PE3C1446/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male right angle to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C1446/HS-180 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1446/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C1446/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2605/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2605/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2605/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-DB coax with Times Microwave components with heatshrink. |
| 0 | ||
| PE3W07880/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male right angle to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W07880/HS-180 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07880/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W07880/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W07880/HS-180 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01814/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W01814/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01814/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W01814/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W18962/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male right angle to N male right angle low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male right angle low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W18962/HS-180 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18962/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W18962/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0050/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle type N cable connection on the other. Our low loss N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0050/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0050/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0050/HS-180 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink. |
| 0 | ||
 TE Connectivity | HSC100S180RJ | TE Connectivity | HSC100S 180R 5% Screw Terminal Resistance Value: 180 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 180 Ω Wire Wound 5 % Power Resistor | Part Number: HSC100S180RJ | Internal Number: 4-2176731-3 | TE Connectivity RoHS : Compliant |
| 14 | |
 Venkel Ltd. | SHPI626630S-180MU | VENKEL LTD | Shielded High Power Inductor;626630;Standard;18uH;�20% RoHS : Compliant | 0 | ||
| SHPI121245S-180MU | VENKEL LTD | Shielded High Power Inductor;121245;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI737345S-180MU | VENKEL LTD | Shielded High Power Inductor;737345;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121280S-180MU | VENKEL LTD | Shielded High Power Inductor;121280;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121210S-180MU | VENKEL LTD | Shielded High Power Inductor;121210;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI737334S-180MU | VENKEL LTD | Shielded High Power Inductor;737334;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121260S-180MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI626650S-180MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;18uH;�20% RoHS : Compliant | 0 | |||
 Vyrian | 0805CS-180XJLB | Coilcraft Inc | General Purpose Inductor, 0.018uH, 5%, 1 Element, Ceramic-Core, SMD, 0805 RoHS : Compliant | 15,907 | ||
| DS1806S-100+T&R | Analog Devices Inc | Digital Potentiometer, 100000ohm, 3-wire Serial Control Interface, 64 Positions, PDSO20 RoHS : Compliant | 12,164 | |||
| DS1803E-50+ | Analog Devices Inc | Digital Potentiometer, 2 Func, 50000ohm, 2-wire Serial Control Interface, 256 Positions, CMOS, PDSO14 RoHS : Compliant | 11,101 | |||
| DS1803E-050-IND | Analog Devices Inc | Digital Potentiometer, 50000ohm, 2-wire Serial Control Interface, 256 Positions, PDIP16 RoHS : Not Compliant | 10,801 | |||
| DS1807-IND | Analog Devices Inc | Digital Potentiometer, 45000ohm, 2-wire Serial Control Interface, 65 Positions, PDIP14 RoHS : Not Compliant | 10,619 | |||
| DS1804U-100+T&R | Analog Devices Inc | Digital Potentiometer, 1 Func, 100000ohm, Increment/decrement Control Interface, 100 Positions, PDSO8 RoHS : Compliant | 8,858 | |||
| DS1803S-050 | Analog Devices Inc | Digital Potentiometer, 50000ohm, 2-wire Serial Control Interface, 256 Positions, PDSO16 RoHS : Not Compliant | 8,422 | |||
| DS1807S+ | Analog Devices Inc | Digital Potentiometer, 2 Func, 45000ohm, 2-wire Serial Control Interface, 65 Positions, CMOS, PDSO16 RoHS : Compliant | 7,135 | |||
| DS1804Z-050-T-R | Analog Devices (Maxim Integrated) | 6,754 | ||||
| DS1804U-100+TR | Analog Devices (Maxim Integrated) | 6,627 | ||||
| DS1804U-010+T&R | Analog Devices Inc | Digital Potentiometer, 1 Func, 10000ohm, Increment/decrement Control Interface, 100 Positions, PDSO8 RoHS : Compliant | 6,051 | |||
| DS1803Z-050+ | Analog Devices Inc | Digital Potentiometer, 2 Func, 50000ohm, 2-wire Serial Control Interface, 256 Positions, CMOS, PDSO16 RoHS : Compliant | 6,037 | |||
| DS1803E-100/T&R/C01 | Analog Devices Inc | Digital Potentiometer | 5,099 | |||
| DS1801S-T-R | Analog Devices (Maxim Integrated) | 5,033 | ||||
DS1809Z-010+T&R | Maxim Integrated Products | Analog Circuit, 1 Func, PDSO8 RoHS : Compliant | 304 | |||
 Win Source Electronics | NCP163AFCS180T2G | onsemi | IC REG LINEAR 1.8V 250MA 4WLCSP / Linear Voltage Regulator IC Positive Fixed 1 Output 250mA 4-WLCSP (0.64x0.64) RoHS : Compliant |
| 205,690 | |
TVS1800DRVR | Texas Instruments | UNIDIR PRECISION SURGE DIODE / RoHS : Compliant |
| 60,090 | ||
| MS-180 | Hirose Electric Co Ltd | CONN COAX JACK STR 50 OHM SMD RoHS : Compliant |
| 50,000 | ||
| DS1804Z-010+ | Maxim Integrated Products | IC POT TRIMMER NV 10KOHM 8-SOIC / Digital Potentiometer 10kOhm 100POS Non-Volatile Linear 8-Pin SOIC N Tube RoHS : Compliant |
| 30,000 | ||
| DS1804Z-010 | Maxim Integrated Products | IC DGTL POT 10KOHM 100TAP 8SOIC RoHS : Not Compliant |
| 30,000 | ||
| DS1803E-100+T&R | Maxim Integrated Products | Digital Potentiometer 256POS 100k Ohm 2Pot 14-Pin TSSOP T/R RoHS : Compliant |
| 18,450 | ||
| DS1804Z-010+T&R | Maxim Integrated Products | IC POT TRIMMER NV 10KOHM 8-SOIC RoHS : Compliant |
| 5,000 | ||
| DS1805E-010 | Maxim Integrated Products | IC DGT POT 10KOHM 256TAP 14TSSOP RoHS : Not Compliant |
| 3,472 | ||
| DS1805E-010+ | Maxim Integrated Products | IC DGT POT 10KOHM 256TAP 14TSSOP RoHS : Compliant |
| 3,472 | ||
SN75ALS180D | Texas Instruments | IC DIFF DRVR/RCVR PAIR 14-SOIC RoHS : Compliant |
| 3,410 | ||
| SN75ALS180DR | Texas Instruments | IC DIFF DRVR/RCVR PAIR 14-SOIC RoHS : Compliant |
| 3,250 | ||
SN75ALS180DG4 | Texas Instruments | DIFFERENTIAL DRIVER AND RECEIVER PAIRS RoHS : Compliant |
| 3,190 | ||
| SN75ALS180DRG4 | Texas Instruments | IC DIFF LINE DRVR/RCVR 14-SOIC RoHS : Compliant |
| 3,190 | ||
| EP2S180F1020I4 | Intel Corporation | IC FPGA 742 I/O 1020FBGA RoHS : Not Compliant |
| 500 | ||
| EP2S180F1020I4N | Altera Corporation | IC FPGA 742 I/O 1020FBGA RoHS : Compliant |
| 500 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand