| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty.
BuyNow |
RS | DELPE-88D (80813)
| Banner Engineering Corp | CDS LP/EU 8 M/M ST/ST 2.4 ZSM8X22 2 NP GN B 2.44 6, 80813 | 1 : $41.65
5 : $39.57
10 : $38.32
|
| 0
 |
Component Electronics, Inc | MBA0204-50-1%-PE-88R7
| Vishay Beyschlag | IN STOCK SHIP TODAY | 1,000 : $0.15
100 : $0.17
1 : $0.23
|
| 870
 |
Pasternack Enterprises US | PE88X2003
| Pasternack Enterprises | Key Specifications (Click on Data Sheet Above for Additional Details).. 2x Frequency Multiplier Module, 8 GHz to 21 GHz Output Frequency, +10 dBm Output Power, Field Replaceable SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2003 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of Error and a maximum frequency input of Error. This SMA microwave frequency multiplier / doubler output minimum frequency is Error and output maximum frequency of Error. SMA frequency doubler / multiplier PE88X2003 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. | 1 : $7,130.0
5 : $6,844.8
10 : $6,559.6
|
| 3
|
PE88D25000
| Pasternack Enterprises | | 1 : $1,620.0
5 : $1,555.2
10 : $1,490.4
25 : $1,425.6
|
| 2
|
PE88X2026
| Pasternack Enterprises | Key Specifications, Output Connector: WR-10 Waveguide with UG-387/U-M Flange, Connector Input: SMA Female, Minimum Output Frequency: 75 GHz, Maximum Output Frequency: 11 GHz, Output Frequency Band: W band, Multiplication Factor: 6 X, Multiplier Type: Active, Typical Output Power: 10 dB, Typical Input Power: 6 dB. WR-10 Waveguide with UG-387/U-M Flanged 6x Active Frequency Multiplier, W band, 75 GHz to 11 GHz Frequency and +10 dBm Power Outputs. All WR-10 waveguide with UG-387/U-M flanges active 6X multipliers, (aka doublers) from Pasternack's exclusive waveguide frequency connector series, have same-day shipping internationally for all online or phone-in purchases. We supply over 100,000 microwave, RF, and millimeter-wave components including these frequency 6X waveguide doublers (or multipliers) PE88X2026 that can multiply an input power ranging as low as 5 dBm to 6 dBm into as much as 10 dBm. Our active frequency 6X multiplier is manufactured to handle a W band frequency input range of 12.5 GHz to 18.33 GHz and W band 75 GHz to 11 GHz output. Call or go online to get PE88X2026 active 5 dBm to 6 dBm waveguide doublers with that are kept in our facility certified to ISO 9001:2015, stocked for same-day, worldwide trade. These microwave doublers with UG-387/U-Mod can multiply a 12.5 GHz to 18.33 GHz input signal into a larger harmonic output of W band 75 GHz to 11 GHz. Pasternack is the optimal place to buy rugged aluminum waveguide radio frequency doublers because unlike our competitors, we keep active multipliers model PE88X2026 with feed-thru-pin SMA female flanges constantly in stock. Expert technical support and 75 GHz to 11 GHz industry-leading output frequency are just two things that are always available with our top-tier female SMA 6X multipliers with -15 dBc harmonic suppression and UG-387/U-Mod pin connectors. Pasternack offers a deep and broad selection of over 100,000 RF microwave components like this frequency multiplier with 270 mA of DC current and SMA female to WR-10 waveguide with UG-387/U-M flanges and feed-thru-pin connectors. 6X multipliers with -15 dBc harmonic suppression send 75 GHz input signals through bandpass filters to select the desired harmonics multiplied to 11 GHz output. These WR-10 waveguide with UG-387/U-M flanges feed-thru-pin waveguides with aluminum UG-387/U-Mod flanged connectors have a typical input VSWR (voltage standing wave ratio) of 2.5:1 and a DC current bias of 270 mA. W band waveguide 6 dBm to 10 dBm doublers operate at -15 dBc harmonic suppression in the W band 75 GHz to 11 GHz range of frequencies. Throughout the whole process of W band signal and power amplification this 75 GHz to 11 GHz frequency multiplier with waveguide connection typically has an input drive level between 5 - 10 dBm and a maximum loss of only -15 dB. The waveguide SMA female series UG-387/U-Mod flanges connection can withstand input frequencies of 12.5 GHz - 18.33 GHz multiplied to 11 GHz - 75 GHz, are globally available for shipping ISO 9001:2015 certified, with CAD drawings for each WR-10 waveguide with UG-387/U-M flanges aluminum feed-thru-pin frequency doubler purchased. Pasternack well-made doubler W band WR-10 waveguide with UG-387/U-M flanges frequency active multipliers are regularly used for communication test equipment and applications of RADAR/satellite/wireless, across the W band 75 GHz-11 GHz frequencies. Downloadable dimensions and specifications in our PDF datasheets avaiable: height of 1.704 in.; width of 1.673 in.; length of 1.673 in.; are REACH compliant operating in the temperature range of -40°C - 80°C and ship fast the same day you ordered. For questions or aid in ordering WR-10 waveguide with UG-387/U-M flanges active no limit multiplier modules just trust in the Pasternack.com specialized customer service sales team and check-out our hassle-free online interface here for 10 dBm 6X multipliers. | 1 : $11,800.0
25 : $11,210.0
50 : $10,620.0
100 : $10,148.0
|
| 1
|
PE88X2013
| Pasternack Enterprises | Key Specifications, Input Frequency, Min: 2 GHz, Input Frequency, Max: 4 GHz, Output Frequency, Min: 4 GHz, Output Frequency, Max: 8 GHz, Conversion Loss: 18 dB, Input VSWR, Max: 3, Output VSWR, MAX: 2.5. 2x Frequency Multiplier, 4000 MHz to 8000 MHz Output Frequency, 14 dB Conversion Loss, SMA. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2013 from Pasternack has SMA conectors and are 50 Ohm. Our SMA frequency multiplier is manufactured for a minimum frequency input of 2 GHz and a maximum frequency input of 4 GHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 4 GHz and output maximum frequency of 8 GHz. SMA frequency doubler / multiplier PE88X2013 from Pasternack is rated for a dBm P1dB and is just one part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock; Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts. | 1 : $457.99
5 : $439.67
10 : $421.35
25 : $403.03
|
| 1
|
PE88X2025
| Pasternack Enterprises | Key Specifications, Output Connector: WR-12 Waveguide with UG-387/U Flange, Connector Input: SMA Female, Minimum Output Frequency: 60 GHz, Maximum Output Frequency: 90 GHz, Output Frequency Band: E band, Multiplication Factor: 6 X, Multiplier Type: Active, Typical Output Power: 20 dB, Typical Input Power: 3 dB. WR-12 Waveguide with UG-387/U Flanged 6x Active Frequency Multiplier, E band, 60 GHz to 90 GHz Frequency and +20 dBm Power Outputs. All WR-12 waveguide with UG-387/U flanges active 6X multipliers, (aka doublers) from Pasternack's exclusive waveguide frequency connector series, have same-day shipping internationally for all online or phone-in purchases. We supply over 100,000 microwave, RF, and millimeter-wave components including these frequency 6X waveguide doublers (or multipliers) PE88X2025 that can multiply an input power ranging as low as 1 dBm to 3 dBm into as much as 20 dBm. Our active frequency 6X multiplier is manufactured to handle a E band frequency input range of 10 GHz to 15 GHz and E band 60 GHz to 90 GHz output. Call or go online to get PE88X2025 active 1 dBm to 3 dBm waveguide doublers with that are kept in our facility certified to ISO 9001:2015, stocked for same-day, worldwide trade. These microwave doublers with UG-387/U can multiply a 10 GHz to 15 GHz input signal into a larger harmonic output of E band 60 GHz to 90 GHz. Pasternack is the optimal place to buy rugged aluminum waveguide radio frequency doublers because unlike our competitors, we keep active multipliers model PE88X2025 with feed-thru-pin SMA female flanges constantly in stock. Expert technical support and 60 GHz to 90 GHz industry-leading output frequency are just two things that are always available with our top-tier female SMA 6X multipliers with -15 dBc harmonic suppression and UG-387/U pin connectors. Pasternack offers a deep and broad selection of over 100,000 RF microwave components like this frequency multiplier with 231 mA of DC current and SMA female to WR-12 waveguide with UG-387/U flanges and feed-thru-pin connectors. 6X multipliers with -15 dBc harmonic suppression send 60 GHz input signals through bandpass filters to select the desired harmonics multiplied to 90 GHz output. These WR-12 waveguide with UG-387/U flanges feed-thru-pin waveguides with aluminum UG-387/U flanged connectors have a typical input VSWR (voltage standing wave ratio) of 2.5:1 and a DC current bias of 231 mA. E band waveguide 3 dBm to 20 dBm doublers operate at -15 dBc harmonic suppression in the E band 60 GHz to 90 GHz range of frequencies. Throughout the whole process of E band signal and power amplification this 60 GHz to 90 GHz frequency multiplier with waveguide connection typically has an input drive level between 1 - 10 dBm and a maximum loss of only -15 dB. The waveguide SMA female series UG-387/U flanges connection can withstand input frequencies of 10 GHz - 15 GHz multiplied to 90 GHz - 60 GHz, are globally available for shipping ISO 9001:2015 certified, with CAD drawings for each WR-12 waveguide with UG-387/U flanges aluminum feed-thru-pin frequency doubler purchased. Pasternack well-made doubler E band WR-12 waveguide with UG-387/U flanges frequency active multipliers are regularly used for communication test equipment and applications of RADAR/satellite/wireless, across the E band 60 GHz-90 GHz frequencies. Downloadable dimensions and specifications in our PDF datasheets avaiable: height of 1.704 in.; width of 1.673 in.; length of 1.673 in.; are REACH compliant operating in the temperature range of -40°C - 80°C and ship fast the same day you ordered. For questions or aid in ordering WR-12 waveguide with UG-387/U flanges active no limit multiplier modules just trust in the Pasternack.com specialized customer service sales team and check-out our hassle-free online interface here for 10 dBm 6X multipliers. | 1 : $13,100.0
25 : $12,445.0
50 : $11,790.0
100 : $11,266.0
|
| 1
|
PE88X2028
| Pasternack Enterprises | Key Specifications, Input Frequency, Min: 11.5 MHz, Input Frequency, Max: 16.5 MHz, Output Frequency, Min: 23 MHz, Output Frequency, Max: 33 MHz, Input VSWR, Max: 2, Output VSWR, MAX: 2.2. Active 2x Frequency Multiplier, 23 to 33 GHz Output Frequency, +10 dBm Output Power, 2.92mm Female. RF coaxial frequency multiplier (also referred to as a coaxial frequency doubler) PE88X2028 from Pasternack has SMA/2.92mm conectors and are 50 Ohm. Our SMA/2.92mm frequency multiplier is manufactured for a minimum frequency input of 11.5 MHz and a maximum frequency input of 16.5 MHz. This SMA microwave frequency multiplier / doubler output minimum frequency is 23 MHz and output maximum frequency of 33 MHz. Our active 2x frequency multiplier can operate at temperatures ranging from -40° to 85° deg C and has a maximum VSWR of 2:1. Make your online purchase right now to take advantage of our same-day shipping. This active 2x frequency multiplier is powered by DC voltage ranging from 9 to 15 Vdc with 125 mA of DC current. Our 50 Ohm frequency multiplier has an input threaded SMA female connector and output 2.92mm female connector. This active frequency multiplier is suitable for Aerospace & Defense, Test & Measurement, Microwave Radio Systems, Military & Commercial Communication Systems, Research & Development, SATCOM and Wireless Communications applications. Our SMA female multiplier comes with a 50 Ohm impedance and a max input power rating (CW) of 6 dBm. The active 2x frequency multiplier has a typical fundamental isolation of 20 dB. Our active 2x frequency multiplier has a storage temperature ranging from -55° to 105° deg C. Our active 2x frequency multiplier has a typical phase noise of -132 dBc/Hz at 100kHz offset. This 6 dBm active frequency multiplier has an overall length of 1.25 inches, a width of 1.25 inches, and a weight of 0.085 lbs. Our active 2x frequency multiplier has a typical conversion gain of 12.00 dB. Additional dimensions and specifications for this active 2x frequency multiplier are on our downloadable PDF datasheet above. SMA frequency doubler / multiplier PE88X2028 from Pasternack is rated for a 6 dBm and is just one part of over 40,000 RF, microwave, and millimeter wave components from supplier Pasternack. This RF frequency multiplier with SMA connectors is in-stock. Pasternack is where to buy your radio frequency components for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts.For further information on similar products, our expert technical support and trained sales team can get you to the ideal active 2x frequency multiplier as per your requirements. | 1 : $1,650.0
5 : $1,584.0
10 : $1,518.0
25 : $1,452.0
|
| 1
|
PE88D12000
| Pasternack Enterprises | | 1 : $2,060.0
5 : $1,977.6
10 : $1,895.2
25 : $1,812.8
|
| 0
|
PE88D8000
| Pasternack Enterprises | | 1 : $3,200.0
5 : $3,072.0
10 : $2,944.0
|
| 0
|
PE88D8002
| Pasternack Enterprises | | 1 : $1,670.0
5 : $1,636.6
10 : $1,603.2
25 : $1,569.8
|
| 0
|
PE88D8003
| Pasternack Enterprises | | 1 : $1,040.0
5 : $998.4
10 : $956.8
25 : $915.2
|
| 0
|
PE88D8004
| Pasternack Enterprises | Key Specifications, Input Frequency (Sine Wave) min: 100 MHz, Input Frequency (Sine Wave) max: 24 GHz, Output Frequency (Square Wave) min: 12.5 MHz, Output Frequency (Square Wave) max : 3 GHz, Divide by Ratio: 8, Output Power typ: 2, Absolute Max Input Power: 13 dBm, Operating DC Voltage typ: 12. Frequency Divider, Divide by 8 Prescaler Module, 100 MHz to 24 GHz, SMA. The PE88D8004 divide-by-8 prescaler frequency divider module from Pasternack has a 50 Ohm impedance. Our frequency divider has threaded SMA female connectors. This 50 Ohm connectorized frequency divider can operate at temperatures ranging from -40 to +85 deg C. Our prescaler frequency divider module has an input frequency range of 100 MHz to 24 GHz and an output frequency range of 12.5 MHz to 3 GHz. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s coax frequency divider has a typical phase noise of -150 dBc/Hz at 100kHz offset. This SMA female frequency divider comes with an 50 Ohm impedance and a maximum input power rating (CW) of 13 dBm. The prescaler frequency divider module is powered by DC voltage ranging from 9 to 15 Vdc with a supply current of 100 mA. This frequency divider has an overall length of 1.25 inches, a width of 1.25 inches, and a weight of 0.085 lbs. Our connectorized frequency divider is suitable for aerospace & defense, test & measurement, microwave radio systems, military & commercial communication systems, research & development, SATCOM and wireless communications applications. This frequency divider PE88D8004 from Pasternack is manufactured with an SMA input connector. Our frequency divider has a storage temperature ranging from -55 to +105 deg C. Additional dimensions and specifications for this divided-by-8 prescaler frequency divider module is on our downloadable PDF datasheet above. Pasternack’s 50 Ohm prescaler frequency divider module with a maximum input power (CW) rating of 13 dBm is in stock and currently available for purchase. Our connectorized frequency divider is part of over one million RF, microwave, and millimeter wave components ready for same-day shipment anywhere in the world. For further information on similar products, our expert technical support and trained sales team can get you to the ideal prescaler frequency divider module as per your requirements. | 1 : $2,680.0
5 : $2,572.8
10 : $2,465.6
25 : $2,358.4
|
| 0
|
PE88D2004
| Pasternack Enterprises | Key Specifications, Input Frequency (Sine Wave) min: 100 MHz, Input Frequency (Sine Wave) max: 24 GHz, Output Frequency (Square Wave) min: 50 MHz, Output Frequency (Square Wave) max : 12 GHz, Divide by Ratio: 2, Output Power typ: 0, Absolute Max Input Power: 13 dBm, Operating DC Voltage typ: 12. Frequency Divider, Divide by 2 Prescaler Module, 100 MHz to 24 GHz, SMA. The PE88D2004 divide-by-2 prescaler frequency divider module from Pasternack has a 50 Ohm impedance. Our frequency divider has threaded SMA female connectors. This 50 Ohm connectorized frequency divider can operate at temperatures ranging from -40 to +85 deg C. Our prescaler frequency divider module has an input frequency range of 100 MHz to 24 GHz and an output frequency range of 50 MHz to 12 GHz. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s coax frequency divider has a typical phase noise of -150 dBc/Hz at 100kHz offset. This SMA female frequency divider comes with an 50 Ohm impedance and a maximum input power rating (CW) of 13 dBm. The prescaler frequency divider module is powered by DC voltage ranging from 9 to 15 Vdc with a supply current of 90 mA. This frequency divider has an overall length of 1.25 inches, a width of 1.25 inches, and a weight of 0.085 lbs. Our connectorized frequency divider is suitable for aerospace & defense, test & measurement, microwave radio systems, military & commercial communication systems, research & development, SATCOM and wireless communications applications. This frequency divider PE88D2004 from Pasternack is manufactured with an SMA input connector. Our frequency divider has a storage temperature ranging from -55 to +105 deg C. Additional dimensions and specifications for this divided-by-2 prescaler frequency divider module is on our downloadable PDF datasheet above. Pasternack’s 50 Ohm prescaler frequency divider module with a maximum input power (CW) rating of 13 dBm is in stock and currently available for purchase. Our connectorized frequency divider is part of over one million RF, microwave, and millimeter wave components ready for same-day shipment anywhere in the world. For further information on similar products, our expert technical support and trained sales team can get you to the ideal prescaler frequency divider module as per your requirements. | 1 : $2,680.0
5 : $2,572.8
10 : $2,465.6
25 : $2,358.4
|
| 0
|
PE88D6000
| Pasternack Enterprises | | 1 : $1,470.0
5 : $1,411.2
10 : $1,352.4
25 : $1,293.6
|
| 0
|
PE88D8001
| Pasternack Enterprises | | 1 : $1,310.0
5 : $1,257.6
10 : $1,205.2
25 : $1,152.8
|
| 0
|
PE88D24000
| Pasternack Enterprises | | 1 : $1,150.0
5 : $1,127.0
10 : $1,104.0
25 : $1,081.0
|
| 0
|
Vyrian | PE88D5000
| Analog Devices Inc | | | 11,957
|
PE88D2000
| Analog Devices Inc | | | 11,271
|
PE88X2002
| Analog Devices Inc | | | 9,305
|
PE88D4000
| Analog Devices Inc | | | 8,616
|
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand