| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
P1100-F-RX nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | CLP-110-02-F-D-BE-P-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 20 Contacts, Solder, CLP Series, Phosphor Bronze - Tape and Reel (Alt: CLP-110-02-F-D-BE-P-TR) RoHS : Compliant |
| 10,800 | |
| CLP-110-02-S-D-K-TR | Samtec Inc | - Tape and Reel (Alt: CLP-110-02-S-D-K-TR) RoHS : Compliant |
| 4,800 | ||
| RCWP110016R5FKTN | Vishay Intertechnologies | - Tape and Reel (Alt: RCWP110016R5FKTN) RoHS : Not Compliant |
| 4,000 | ||
| RCWP11006K19FKS3 | Vishay Intertechnologies | - Tape and Reel (Alt: RCWP11006K19FKS3) RoHS : Not Compliant |
| 4,000 | ||
| RCWP110030R9FKTN | Vishay Intertechnologies | - Tape and Reel (Alt: RCWP110030R9FKTN) RoHS : Not Compliant |
| 4,000 | ||
| RCWP110068R1FKTP | Vishay Intertechnologies | - Tape and Reel (Alt: RCWP110068R1FKTP) RoHS : Not Compliant |
| 4,000 | ||
| RCWP11006K19FKTN | Vishay Intertechnologies | - Tape and Reel (Alt: RCWP11006K19FKTN) RoHS : Not Compliant |
| 4,000 | ||
| CLP-110-02-L-D-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 20 Contacts, Solder, CLP Series, Phosphor Bronze - Tape and Reel (Alt: CLP-110-02-L-D-TR) RoHS : Compliant |
| 2,400 | ||
| CLP-110-02-L-D-K-TR | Samtec Inc | - Tape and Reel (Alt: CLP-110-02-L-D-K-TR) RoHS : Compliant |
| 1,200 | ||
| RCWP11003R90GMS6 | Vishay Intertechnologies | - Tape and Reel (Alt: RCWP11003R90GMS6) RoHS : Not Compliant |
| 1,200 | ||
| CLP-110-02-F-D-A-P | Samtec Inc | - Rail/Tube (Alt: CLP-110-02-F-D-A-P) RoHS : Compliant |
| 454 | ||
| CLP-110-02-F-D-A | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 20 Contacts, Surface Mount, CLP - Rail/Tube (Alt: CLP-110-02-F-D-A) RoHS : Compliant |
| 115 | ||
| EVALXDPP1100Q024DBTOBO1 | Infineon Technologies AG | EVALXDPP1100Q024DBTOBO1 - Boxed Product (Development Kits) (Alt: EVALXDPP1100Q024DBTOBO1) RoHS : Not Compliant |
| 1 | ||
| 3292P-1-100LF | Bourns Inc | - Rail/Tube (Alt: 3292P-1-100LF) RoHS : Compliant |
| 0 | ||
| PR-25AP-1/10-0600-3/8-M12 | Omega Engineering | AIR TEMPERATURE RTD PROBE WITH M12 CONNECTOR - Bulk (Alt: PR-25AP-1/10-0600-3/8-M12) RoHS : Not Compliant |
| 0 | ||
![]() Newark | RK73H1ETTP1100F | KOA Speer Electronics Inc | RES, 110R, 1%, 0.1W, 0402; RoHS : Compliant |
| 38,791 | |
| RK73H1ETTP1100F | KOA Speer Electronics Inc | RES, 110R, 1%, 0.1W, 0402; RoHS : Compliant |
| 38,791 | ||
| MFP1-100K JI | TT Electronics Welwyn Components | RES, 100K, 5%, 1W, AXIAL, METAL FILM; RoHS : Compliant |
| 5,611 | ||
| CHP1-100-4641-F-7 | TT Electronics Resistors | RESISTOR; Available until stocks are exhausted RoHS : Compliant |
| 1,500 | ||
| OP-1100 | BlockMaster Blocks | PCB SCREW TERMINAL W/ M6 SCREW 1000V 135; RoHS : Compliant |
| 480 | ||
| 3006P-1-100LF | Bourns Inc | TRIMMER POTENTIOMETER, 10 OHM 15TURN THROUGH HOLE; Trimmer Type:Multi Turn; Element Material:Cermet; Adjustment Type:Side Adjust; Track Resistance:10ohm; Potentiometer Mounting:Through Hole; No. of Turns:15Turns; Power Rating:750mW RoHS Compliant: Yes RoHS : Compliant |
| 300 | ||
| CLP-110-02-L-D | Samtec Inc | RECEPTACLE, 1.27MM, SMD, 20WAY; RoHS : Compliant |
| 298 | ||
| 3006P-1-100LF | Bourns Inc | TRIMMER, 15 TURN 10R; RoHS : Compliant |
| 274 | ||
| ARTP-1100 | L-com Inc | RF / COAXIAL CONNECTOR, TNC RP COAXIAL; RoHS : Compliant |
| 240 | ||
| ARMMP-1100 | L-com Inc | RF / COAXIAL CONNECTOR,MMCX RP COAXIAL; RoHS : Compliant |
| 203 | ||
| 3299P-1-100LF | Bourns Inc | TRIMMER, MULTI TURN, CERMET, SIDE ADJUST; RoHS : Compliant |
| 113 | ||
| ARSP-1100 | L-com Inc | RF COAX CONN, SMA RP PLUG, 50 OHM, CABLE; RoHS : Compliant |
| 65 | ||
| CLP-110-02-L-D | Samtec Inc | CONN, RCPT, 20POS, 2ROW, 1.27MM, SMT; RoHS : Compliant |
| 55 | ||
| CLP-110-02-L-D-P | Samtec Inc | BTB CONN, RCPT, 20POS, 2ROW, 1.27MM; RoHS : Compliant |
| 2 | ||
| P1100 | nVent Hoffman | PLINTH FRONT REAR 100X1000; RoHS : Compliant |
| 0 | ||
![]() RS | 3006P-1-100LF | Bourns Inc | TRIMMER, CERMET, REST 10 OHMS, PCB,15 TURNS, PWR 0.75W, DIM 0.75INLX0.19INWX0.25INH RoHS : Compliant |
| 185 | |
| RCP11003115/120VAC | Carlo Gavazzi Holding AG | 3PDT SOCKET MOUNT RELAY PLUG IN 10 A 115 - 120V AC |
| 44 | ||
| RCP11003230VAC | Carlo Gavazzi Holding AG | RELAY, 3PDT, 230VAC, 10A, LED, 11 PIN OCTAL PLUG-IN |
| 13 | ||
| RCP1100324VAC | Carlo Gavazzi Holding AG | 3PDT SOCKET MOUNT OCTAL RELAY PLUG IN, 10 A, 24V AC |
| 9 | ||
| N27P 1100U0 | Sifam Tinsley Precision Instrumentation Ltd | N27P 1-PHASE NETWORK POWER METER, DIN RAIL MT., 1/5A AC, 2 RELAY OUT. |
| 5 | ||
| STBXMP1100 | Schneider Electric | TERMINATION PLATE - SPARE RoHS : Compliant |
| 3 | ||
| RCP1100324VDC | Carlo Gavazzi Holding AG | RELAY, 3PDT, 24VDC, 10A, LED, 11 PIN OCTAL PLUG-IN |
| 2 | ||
| WP1100C | Intermatic | COVER, WEATHERPROOF, SGL, VERT/H |
| 1 | ||
| TP1100H150 | Gates | POWERGRIP TWIN POWER TIMING BELT |
| 0 | ||
| 01EBCP1100EXAT (COP.01EBCP1100EXAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
| 01EBCP1100GRAT (COP.01EBCP1100GRAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
| 02EBCP1100EXAT (COP.02EBCP1100EXAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
| 03EBCP1100GRAT (COP.03EBCP1100GRAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
| 02EBCP1100GRAT (COP.02EBCP1100GRAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
| 03EBCP1100EXAT (COP.03EBCP1100EXAT) | SKF Cooper | COOPER PILLOW BLOCK, BORE DIA. 11 IN |
| 0 | ||
![]() Bisco Industries | TP-110-02-2-T | Components Corporation | 12,000 | |||
| PLP1-100-FD | Bivar Inc | 5,000 | ||||
| MP-1100-06-DS-4X9 | Sullins Connector Solutions | 2,800 | ||||
| P1100-9 | Electro-Term/Hollingsworth | 1,000 | ||||
| PLP1-100-F | Bivar Inc | RoHS : Compliant | 83 | |||
| SLP-1-100-413-01 | Essentra Components | 45 | ||||
| SLP-1-100-307-01 | Essentra Components | 37 | ||||
| SP1-10-01 | Essentra Components | 4 | ||||
![]() Rochester Electronics | NX5P1100UKZ | NXP Semiconductors | Logic Controlled High-Side Power Switch RoHS : Not Compliant |
| 12,407 | |
| SNP1100SAT3G | onsemi | THY SPCL SMB RoHS : Compliant |
| 4,708 | ||
| XDPP1100Q040XUMA1 | Infineon Technologies AG | Digital power supply controller with PMBus interface & ARM CORTEX RoHS : Compliant |
| 9,527 | ||
| TSP50P11007CNL | Texas Instruments | SPEECH CMOS TSP50P11C RoHS : Not Compliant |
| 1,763 | ||
![]() Sager | 3760DP/1100 | ABB Group | Thomas & Betts |
| 0 | |
| RF174-01SR1-03SP1-1000 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
| RF316-02RP1-02RP1-1000 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 316 Cable RoHS : Compliant | 0 | |||
| CLP-110-02-F-D-BE-P | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-110-02-FM-D | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-110-02-G-D-BE-P-FR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-110-02-LM-D-BE-PA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| CLP-110-02-F-D-A-K | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-110-02-FM-D-PA-TR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| CLP-110-02-L-D-A-P-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| CLP-110-02-S-D-BE-K-TR | Samtec Inc | Headers & Wire Housings Low Profile Dual-Wipe Socket, .050 Pitch RoHS : Compliant |
| 0 | ||
| RF174-02SP1-02SP1-1000 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 174 Cable RoHS : Compliant | 0 | |||
| RF316-07SP1-07SP1-1000 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 316 Cable RoHS : Compliant | 0 | |||
| RF316-13GP1-13GP1-1000 | Samtec Inc | RF Cable Assemblies 50 Ohm RF Cable Assembly, RG 316 Cable RoHS : Compliant | 0 | |||
| P1-10047 | OTTO Engineering Inc | Pushbutton Switches 10A 28VDC | 0 | |||
![]() TME | DG242V-5.08-02P-11-00Z(H) | Degson Electronics Co Ltd | Connector: PCB terminal block; terminal; 15A; 300V; PIN: 2; on PCBs |
| 1,917 | |
| CHP11002200F | TT Electronics plc | Resistor: thick film; 220Ω; 1W |
| 1,500 | ||
| CHP1-100-1200-F7 | TT Electronics plc | Resistor: thick film; 120Ω; 1W |
| 1,500 | ||
| D-WS2.5-QU-01P-11-00Z(H) | Degson Electronics Co Ltd | Separating plate; grey |
| 98 | ||
| D-WS1.5-QU-01P-11-00Z(H) | Degson Electronics Co Ltd | Separating plate; grey |
| 64 | ||
| D-DSKK4-01P-11-00Z(H) | Degson Electronics Co Ltd | End piece |
| 52 | ||
| D-WS4-QU-01P-11-00Z(H) | Degson Electronics Co Ltd | Separating plate; grey |
| 50 | ||
| DFA6-07P-11-00Z(H) | Degson Electronics Co Ltd | Comb bridge; PIN: 7; grey |
| 43 | ||
| DFA4-03P-11-00Z(H) | Degson Electronics Co Ltd | Comb bridge; PIN: 3; grey |
| 33 | ||
| CLP-110-02-F-D-BE-P-TR | Samtec Inc | Connector: pin strips; socket; female; PIN: 20; vertical; SMT; 2x10 RoHS : Compliant |
| 10 | ||
| 2EDGRC-5.0-3P-11-00A(H) | Degson Electronics Co Ltd | Connector: pluggable terminal block; socket; male; 20A; 320V; THT |
| 0 | ||
| DFB10-05P-11-00Z(H) | Degson Electronics Co Ltd | Comb bridge; PIN: 5; red |
| 0 | ||
| DG801-01P-11-00Z(H) | Degson Electronics Co Ltd | Connector: terminal block; 6.3A; 250V; screw terminal; brass; grey |
| 0 | ||
| DG242V-5.08-03P-11-00AH | Degson Electronics Co Ltd | Connector: PCB terminal block; terminal; 15A; 300V; PIN: 3; on PCBs |
| 0 | ||
| DG250-3.5-08P-11-00A(H) | Degson Electronics Co Ltd | Connector: PCB terminal block; terminal; 5A; 400V; PIN: 8; on PCBs RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | CLP11002FDAP | Samtec Inc | AVAILABLE EU | 1,377 | ||
![]() ComSIT USA | 4816P1100LF | Bourns Inc | THICK FILM SURFACE MOUNTED MEDIUM BODY RESISTOR Array/Network Resistor, Isolated, Metal Glaze/thick Film, 1.28W, 10ohm, 50V, 2% +/-Tol, 250ppm/Cel, Surface Mount, 2244 RoHS : Compliant | 2,404 | ||
![]() Interstate Connecting Components | EP1100000000G | Amphenol Anytek | EP - 5.0 - 11P 13.75MM PIN 1. | 0 | ||
| MTFP1100C-PKG | Amphenol Fiber Systems International | INVALID CALLOUT DO NOT USE | 0 | |||
| U95L1P1100A | Amphenol High Speed Interconnects | 1X1 QSFP28 CAGE WITH HEAT SINK | 0 | |||
| U95L1P1100A | Amphenol FCi | 1X1 QSFP28 CAGE WITH HEAT SINK | 0 | |||
| SGRP-1-1000 | TE Connectivity | SGRP-1-1000 RoHS : Not Compliant | 0 | |||
| U95T1P11001 | Amphenol High Speed Interconnects | 1X1 ULTRA PORT QSFP CAGE , HS, | 0 | |||
| U95T1P11001 | Amphenol FCi | 1X1 ULTRA PORT QSFP CAGE , HS, | 0 | |||
| U95L2P1100A | Amphenol FCi | 1X2 QSFP28 | 0 | |||
| U95L2P1100A | Amphenol High Speed Interconnects | 1X2 QSFP28 | 0 | |||
| MTFP1100 | Amphenol Fiber Systems International | TFOCA II TERMINI, SM | 0 | |||
| CL1P1100 | SOURIAU-SUNBANK | RoHS : Compliant | 0 | |||
| YHVP1100-1P-90-B-0 | TE Connectivity | HVP1100-1PHI XE,90,KEY B RoHS : Compliant |
| 0 | ||
| U90A2P1100A | Amphenol FCi | 1X2 QSFP+ CAGE | 0 | |||
| U90A2P1100A | Amphenol High Speed Interconnects | 1X2 QSFP CAGE | 0 | |||
| OP1100000000G | Amphenol Anytek | OP - 5.0- 11P 12.5MM TIN-PLAT | 0 | |||
![]() NexGen Digital | P1100SARP![]() | Littelfuse Inc | RoHS : Not Compliant | 8,626 | ||
| CHP1-100-15R0G | TT Electronics Resistors | 758 | ||||
| CLP-110-02-F-D-P-TR | Samtec Inc | RoHS : Compliant | 102 | |||
| CHP110010R0F | TT Electronics Resistors | RoHS : Not Compliant | 10 | |||
![]() PEI Genesis | KAP1100 | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
| MTFP1100 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | PLP1-100-S | Bivar Inc | Light Pipe, Rigid, Panel Mount (Rear), 3 |
| 15,680 | |
| PLP1-100-FS | Bivar Inc | Light Pipe, Rigid, Panel Mount (Rear), G |
| 13,846 | ||
| CLP-110-02-F-D-K-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 7,833 | ||
| CLP-110-02-S-D-K-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 3,410 | ||
| CLP-110-02-F-D-A | Samtec Inc | SOCKET STRIP 1.27MM 10POS 2ROW RoHS : Compliant |
| 1,809 | ||
| CLP-110-02-G-D-P-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 1,474 | ||
| CLP-110-02-F-D-A-P-TR | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 1,140 | ||
| CLP-110-02-L-DH-A-TR | Samtec Inc | SOCKET STRIP 1.27MM 10POS 2ROW HORZ RoHS : Compliant |
| 594 | ||
| CLP-110-02-F-D | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 98 | ||
| CLP-110-02-L-D-P | Samtec Inc | SOCKET STRIP 1.27MM 10POS 2ROW RoHS : Compliant |
| 69 | ||
| CLP-110-02-G-D-A | Samtec Inc | SOCKET STRIP 1.27MM 10POS 2ROW RoHS : Compliant |
| 58 | ||
| CLP-110-02-F-D-K | Samtec Inc | SOCKET STRIP 1.27MM 10POS 2ROW RoHS : Compliant |
| 58 | ||
| CLP-110-02-F-D-P | Samtec Inc | SOCKET STRIP 1.27MM 10POS 2ROW RoHS : Compliant |
| 54 | ||
| CLP-110-02-L-D | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 12 | ||
| CLP-110-02-G-D | Samtec Inc | .050 Tiger Claw Rugged Reliable Dual Wip RoHS : Compliant |
| 1 | ||
![]() Richardson RFPD | PSEP11000500U | Wall Industries Inc | 100 to 200 Watts AC/DC Open Frame Power Supplies S RoHS : Compliant | 0 | ||
| PSEP11001200 | Wall Industries Inc | AC/DC Open Frame Power Supply | 0 | |||
| PSEP11001800 | Wall Industries Inc | AC/DC Open Frame Power Supply RoHS : Compliant | 0 | |||
| PSEP11001900 | Wall Industries Inc | AC/DC Open Frame Power Supply | 0 | |||
| PSEP11002400 | Wall Industries Inc | AC/DC Open Frame Power Supply RoHS : Compliant | 0 | |||
| IPP-1100 | Innovative Power Products Inc | Combiner with Connector RoHS : Compliant | 0 | |||
| PSEP11003600 | Wall Industries Inc | AC/DC Open Frame Power Supply | 0 | |||
| PSEP11000500 | Wall Industries Inc | 100 to 200 Watts AC/DC Open Frame Power Supply Sin RoHS : Compliant | 0 | |||
| OP110000C | Analog Devices Inc | Op Amp Quad GP ±22V Die Tray RoHS : Compliant | 0 | |||
| PSEP11004800 | Wall Industries Inc | AC/DC Open Frame Power Supply RoHS : Compliant | 0 | |||
| RF402-01SP1-01SP1-1000 | Samtec Inc | Cable Assembly Coaxial 1m 19AWG SMA to SMA PL-PL S RoHS : Compliant | 0 | |||
![]() Rutronik | FP11001_LISA2-M-PIN | LEDIL | LENS+HOLDER FOR OSRAM OSLON SSL RoHS : Compliant |
| 115 | |
![]() Chip 1 Exchange | DG250-3.5-02P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 96,942 | ||
| DG250-3.5-04P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 46,911 | |||
| DG250-3.5-05P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 14,172 | |||
| D-DS4-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 9,100 | |||
| PC16-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 5,324 | |||
| TS-K-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 5,185 | |||
| D-WS6-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 3,900 | |||
| 2EDGRC-5.08-04P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 3,454 | |||
| D-PC16-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 3,120 | |||
| 15EDGK-3.5-02P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 2,681 | |||
| D-WS10-TW-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 2,671 | |||
| 2EDGK-5.08-03P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 1,883 | |||
| DGH16-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 1,519 | |||
| TS-KK3-01P-11-00AH | Degson Electronics Co Ltd | INSTOCK | 1,430 | |||
| CLP-110-02-L-D-A-K-TR | INSTOCK | 240 | ||||
![]() Avnet Abacus | CLP-110-02-F-D-P-FR | Samtec Inc | (Alt: CLP-110-02-F-D-P-FR) RoHS : Compliant | 7,200 | ||
| CLP-110-02-L-D | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 20 Contacts Solder CLP Series Phosphor Bronze (Alt: CLP-110-02-L-D) RoHS : Compliant | 748 | |||
| CLP-110-02-F-D-P-TR | Samtec Inc | (Alt: CLP-110-02-F-D-P-TR) RoHS : Compliant | 622 | |||
| CLP-110-02-F-D-BE-K-TR | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 20 Contacts Solder CLP Series Phosphor Bronze (Alt: CLP-110-02-F-D-BE-K-TR) RoHS : Compliant | 326 | |||
| 637P11005I3T | CTS Corporation | - Tape and Reel (Alt: 637P11005I3T) RoHS : Compliant | 0 | |||
| 3266P-1-100LF | Bourns Inc | (Alt: 3266P-1-100LF) RoHS : Compliant | 0 | |||
| RK73H1ETTP1100F | KOA Speer Electronics Inc | SMD Chip Resistor 110 ohm 1 100 mW 0402 1005 Metric Thick Film Precision - Tape and Reel (Alt: RK73H1ETTP1100F) RoHS : Compliant | 0 | |||
| CLP-110-02-L-D-A | Samtec Inc | (Alt: CLP-110-02-L-D-A) RoHS : Compliant | 0 | |||
| RCWP1100270RJNWB | Vishay Intertechnologies | (Alt: RCWP1100270RJNWB) RoHS : Not Compliant | 0 | |||
| CLP-110-02-L-DH-TR | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 20 Contacts Surface Mount Right Angle (Alt: CLP-110-02-L-DH-TR) RoHS : Compliant | 0 | |||
| CLP-110-02-F-D-BE-P | Samtec Inc | Conn Socket Strip SKT 20 POS 127mm Solder ST SMD Tube (Alt: CLP-110-02-F-D-BE-P) RoHS : Compliant | 0 | |||
| CLP-110-02-F-DH-A-TR | Samtec Inc | (Alt: CLP-110-02-F-DH-A-TR) RoHS : Compliant | 0 | |||
| CLP-110-02-L-D-A-P-TR | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 20 Contacts Solder CLP Series Phosphor Bronze (Alt: CLP-110-02-L-D-A-P-TR) RoHS : Compliant | 0 | |||
| CLP-110-02-L-D-A-K-TR | Samtec Inc | PCB Receptacle BoardtoBoard 127 mm 2 Rows 20 Contacts Solder CLP Series Phosphor Bronze (Alt: CLP-110-02-L-D-A-K-TR) RoHS : Compliant | 0 | |||
| CLP-110-02-G-D-BE-K-TR | Samtec Inc | (Alt: CLP-110-02-G-D-BE-K-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | DMP1100UCB4-7![]() | Diodes Incorporated | (Alt: DMP1100UCB4-7) RoHS : Compliant |
| 15,000 | |
| CLP-110-02-L-D-A-P-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 20 Contacts, Solder, CLP Series, Phosphor Bronze (Alt: CLP-110-02-L-D-A-P-TR) RoHS : Compliant | 0 | |||
| TLMP1100-GS15 | Vishay Intertechnologies | (Alt: TLMP1100-GS15) RoHS : Compliant | 0 | |||
| CLP-110-02-F-D-K-TR | Samtec Inc | PCB Receptacle, Board-to-Board, 1.27 mm, 2 Rows, 20 Contacts, Solder, CLP Series, Phosphor Bronze (Alt: CLP-110-02-F-D-K-TR) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | FP1100016 | Diodes Incorporated | (Alt: FP1100016) RoHS : Compliant | 0 | ||
DMP1100UCB4-7![]() | Diodes Incorporated | (Alt: DMP1100UCB4-7) RoHS : Compliant | 0 | |||
| FP11002_LISA2-W-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11002_LISA2-W-PIN) RoHS : Compliant | 0 | |||
| FP11001_LISA2-M-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11001_LISA2-M-PIN) RoHS : Compliant | 0 | |||
| FP11003_LISA2-WW-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11003_LISA2-WW-PIN) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | RK73H1ETTP1100F | YAGEO Corporation | IN STOCK SHIP TODAY |
| 11,560 | |
| RK73H1ETTP1100F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,350 | ||
| CHP1100R220G | TT Electronics Resistors | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,300 | ||
| P1100-HC-15.000MHZ | Pletronics Inc | IN STOCK SHIP TODAY | 1,250 | |||
| 280DH-1LP11-000 | ETRI | IN STOCK SHIP TODAY |
| 481 | ||
| FKP1-100/2000/5-PCM15 | Wima | IN STOCK SHIP TODAY |
| 409 | ||
| CLP-110-02-G-D-BE | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 180 | ||
| TP1-100 | Cooper Industries | IN STOCK SHIP TODAY |
| 109 | ||
| P1100-HC-30.000MHZ | Pletronics Inc | IN STOCK SHIP TODAY |
| 31 | ||
| 4816P-1-100 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 22 | ||
| 225DH-1LP11-000 | ETRI | IN STOCK SHIP TODAY |
| 8 | ||
| P1100-32.4216MHZ | NAMHAN | IN STOCK SHIP TODAY |
| 5 | ||
| 230DH-1LP11-000 | ETRI | IN STOCK SHIP TODAY |
| 4 | ||
| 126DH-1LP11-0000 | ETRI | IN STOCK SHIP TODAY | 1 | |||
| TP1100A-4C | ZURN | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | DWP1100A | Essentra Components |
| 115 | ||
| BP1100A | Essentra Components | 1.004 DIA BARREL PLUGLDPE NATU | 0 | |||
| SP1-10-01 | Essentra Components | SpacerLockNatural5/8 in Spc Spacer Locking Natural | 0 | |||
| KSLSP1-10-01 | Essentra Components | CB SptKeyslotNatural5/8 in Spc CB Support Keyslot Natural | 0 | |||
| TLP-1100/NI | Sugatsune Kogyo Co Ltd | BAR FOR TLP, 1100MM | 0 | |||
| MBRP1-100-01 | Essentra Components | MINI BARB RIVT PIN,NAT,.100 IN | 0 | |||
![]() EBV Elektronik | FP11002_LISA2-W-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11002_LISA2-W-PIN) RoHS : Compliant | 9,400 | ||
| FP11001_LISA2-M-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11001_LISA2-M-PIN) RoHS : Compliant | 5,000 | |||
| TLMP1100-GS15 | Vishay Intertechnologies | LED Single Chip Pure Green 561nm 30mA 2Pin SMD TR (Alt: TLMP1100-GS15) RoHS : Compliant | 0 | |||
| XDPP1100Q040XUMA1 | Infineon Technologies AG | (Alt: SP005404783) RoHS : Compliant | 0 | |||
| XDPP1100Q024XUMA1 | Infineon Technologies AG | Digital Power Supply Controller 3V to 36V 24Pin VQFN TR (Alt: SP005404779) RoHS : Compliant | 0 | |||
| FP11003_LISA2-WW-PIN | LEDIL | LENS ROUND 1 POS 99MM OD 66MM H (Alt: FP11003_LISA2-WW-PIN) RoHS : Compliant | 0 | |||
![]() FDH Electronics | CLP-110-02-H-D-P-TR | Samtec Inc | PCB Connectors RoHS : Compliant | 6,800 | ||
| P110012FRRD | Western Filament Inc | Harness Mgmt |
| 57 | ||
| CL1P1100 | SOURIAU-SUNBANK | Connector Misc RoHS : Compliant | 0 | |||
![]() Maritex | DG242V-5.0-02P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 2-ways; vertical entry; range wire 0.2-2.5mm2 (AWG 28-12); spring-loaded; orange; UL 300V/15A |
| 1,000 | |
| DG250-3.5-02P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 3.5mm; 2-ways; oblique entry; range wire 0.2-1.5mm2 (AWG 22-16); spring-loaded; grey; UL 300V/8A |
| 900 | ||
| DG242V-5.08-02P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.08mm; 2-ways; vertical entry; range wire 0.2-2.5mm2 (AWG 28-12); spring-loaded; orange; UL 300V/15A |
| 839 | ||
| DG235-5.0-03P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 3-ways; side entry; range wire 1.5mm2 (AWG 20-16); spring-loaded; gray; UL 300V/8A |
| 733 | ||
| DG242V-5.0-06P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 6ways; vertical entry; range wire 0.2-2.5mm2 (AWG 28-12); spring-loaded; orange; UL 300V/15A |
| 578 | ||
| DG235-5.0-04P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 4-ways; side entry; range wire 1.5mm2 (AWG 20-16); spring-loaded; gray; UL 300V/8A |
| 400 | ||
| DG250-2.5-04P-11-00A(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 2.5mm; 4-ways; oblique entry; range wire 0.5mm2 (AWG 24-20); spring-loaded; grey; UL 300V/2A TUV 250V/6A RoHS : Compliant |
| 180 | ||
| DG242V-5.0-05P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 5-ways; vertical entry; range wire 0.2-2.5mm2 (AWG 28-12); spring-loaded; orange; UL 300V/15A |
| 100 | ||
| DG235-3.81-06P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 3.81mm; 6-ways; side entry; range wire 1.5mm2 (AWG 20-18); spring-loaded; gray; UL 300V/5A, TUV 250V/10A |
| 97 | ||
| DG242R-5.0-06P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 6-ways; side entry; range wire 0.2-2.5mm2 (AWG 28-12); spring-loaded; orange; UL 300V/15A |
| 95 | ||
| DG235-7.5-04P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 7.5mm; 4-ways; side entry; range wire 1.5mm2 (AWG 20-18); spring-loaded; black; UL 300V/5A, TUV 450V/15A |
| 90 | ||
| DG242R-5.0-04P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 4-ways; side entry; range wire 0.2-2.5mm2 (AWG 28-12); spring-loaded; orange; UL 300V/15A |
| 90 | ||
| DG235-5.0-08P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 8-ways; side entry; range wire 1.5mm2 (AWG 20-16); spring-loaded; gray; UL 300V/8A |
| 63 | ||
| DG202-5.0-03P-11-00Z(H) | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 3-ways; range wire 2.5mm2 (AWG 20-12); spring-loaded; gray; UL 300V/12A |
| 10 | ||
| DC2.5-01P-11-00Z(H) | Degson Electronics Co Ltd | Installation terminal block; 1-level; 4-contacts for wire 0.5-4mm2 (22-10AWG); screw type; grey; for DIN rail; 500V/32A |
| 8 | ||
![]() Master Electronics | 299DH-1LP11-000 | ETRI Rosenburg | DC Fan Axial Ball Bearing 12V 7V to 13.8V 51.1CFM 34dB 92 X 92 X 25.4mm RoHS : Compliant |
| 567 | |
| 3760DP/1100 | Thomas & Betts | FS/FD Non-Metallic Line - 30 Amp - 3 Pole - 4 Wire - 600VAC - Spec Grade UL 94-5VA Plug - 1.100 Inch Bushing ID. RoHS : Compliant |
| 0 | ||
| 3292P-1-100LF | Bourns Inc | Res Cermet Trimmer 10 Ohm 10% 0.5W(1/2W) 25(Elec)Turn 2.29mm (9.53 X 11.05 X 3.81mm) Pin Thru-Hole Tube RoHS : Compliant |
| 0 | ||
| 4816P-1-100 | Bourns Inc | Res Thick Film NET 10 Ohm 1 Ohm 1.28W ±250ppm/°C ISOL Molded 16-Pin SOM Gull Wing SMD T/R RoHS : Not Compliant |
| 0 | ||
| CLP-110-02-F-D-BE-P | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-FM-D | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-G-D-BE-P-FR | Samtec Inc | LOW PROFILE DUAL-WIPE SOC RoHS : Compliant |
| 0 | ||
| CLP-110-02-LM-D-BE-PA | Samtec Inc | .050 Tiger Claw™ Rugged Reliable Dual Wipe Socket Strip RoHS : Compliant |
| 0 | ||
| CLP-110-02-LTL-D-BE-A-K-FR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CLP-110-02-SM-D-A-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CHP-1-100-2R00-J-LF | TT Electronics Resistors | Cylindrical SMD Metal Glaze Resistor - 2 Ohm ±5% - 1W - ±100ppm/°C - Pb Free - 2512 - +150°C - AEC-Q200 RoHS : Compliant |
| 0 | ||
| 3352P-1-100LF | Bourns Inc | Res Cermet Trimmer 10 Ohm 20% 0.5W(1/2W) 1(Elec)/1(Mech)Turn (8.89 X 10.67 X 5.33mm) Pin Thru-Hole Bag RoHS : Compliant |
| 0 | ||
| 3266P-1-100LF | Bourns Inc | Res Cermet Trimmer 10 Ohm 10% 0.25W(1/4W) 12(Elec)Turn 1.78mm (6.71 X 7.5 X 4.42mm) Pin Thru-Hole Tube RoHS : Compliant |
| 0 | ||
| CHP11002871F | TT Electronics Resistors | Cylindrical SMD Metal Glaze Resistor - 2.87 kOhm ±1% - 1W - ±100ppm/°C - 2512 - +150°C - AEC-Q200 RoHS : Compliant |
| 0 | ||
| CHP110068R0F | TT Electronics Resistors | Cylindrical SMD Metal Glaze Resistor - 68 Ohm ±1% - 1W - ±100ppm/°C - 2512 - +150°C - AEC-Q200 RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 3059P-1-100LF | Bourns Inc | Trimmer Resistors - Through Hole 10 OHMS 10% 1-1/4IN PC Mount RoHS : Compliant |
| 50 | |
| 3339P-1-100LF | Bourns Inc | Trimmer Resistors - Through Hole 10ohm 5/16" Rnd 4Turn Cermet RoHS : Compliant |
| 50 | ||
| PLP1-100-FS | Bivar Inc | LED Light Pipes 3mm FF Smoked Lens .100" Rigid LitePipe |
| 50 | ||
| P1100S3NLRP-A | Littelfuse Inc | Thyristor Surge Protection Devices - TSPD SIDACtor Bi 90V 3000A DO214AB RoHS RoHS : Compliant |
| 50 | ||
| PLP1-100-FD | Bivar Inc | LED Light Pipes 3mm FF Diff Lens .100" Rigid LitePipe |
| 50 | ||
| RCP11003230VAC | Carlo Gavazzi Holding AG | Relay; 3PDT; 230VAC; 10A; LED; 11 Pin Octal Plug-In |
| 26 | ||
| 3057P-1-100 | Bourns Inc | Trimmer Resistors - Through Hole 10 OHMS 5% 1 1/4IN PC Mount RoHS : Compliant |
| 15 | ||
| P1-10025 | OTTO Engineering Inc | Basic / Snap Action Switches S/A MS25089-4AR EX .187 BTN |
| 12 | ||
| P1-10047 | OTTO Engineering Inc | Basic / Snap Action Switches 10A 28VDC |
| 10 | ||
| P1-10050 | OTTO Engineering Inc | Basic / Snap Action Switches S/A P1-12611 EX .188 LG BTN |
| 8 | ||
| N27P 1100U0 | Sifam Tinsley Precision Instrumentation Ltd | N27P 1-Phase Network Power Meter, DIN Rail Mt., 1/5A AC, 2 Relay Out |
| 5 | ||
| 3250P-1-100 | Bourns Inc | Trimmer Resistors - Through Hole 10 OHMS 5% Square Sealed RoHS : Compliant |
| 0 | ||
| N30P 110000U0 | Sifam Tinsley Precision Instrumentation Ltd | N30P Power & Energy Digital Panel Meter, 85-253V, RS-485 + Add. Outputs |
| 0 | ||
| SP1100ST-0.012-02-1212 | The Bergquist Company | Thermal Interface Products Sil-Pad, Insulating, Conductive, Soft Tack, 12"x12" Sheet, 0.012" Thickness |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06854-SP1-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 100 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854-SP1-100CM, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854-SP1-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854-SP1-100CM can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink. |
| 122 | |
| PE3W01725-SP1-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 39.37 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm Push-On MCX Plug Right Angle Cable 100 cm Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 100 cm length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 100 cm length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and right angle MCX cable connection on the other. Our BNC to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. This BNC to MCX cable is a female to plug coax assembly, PE3W01725-SP1-100CM, can also be known as a BNC jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. BNC jack to MCX male cable assembly PE3W01725-SP1-100CM is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle MCX cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female bulkhead to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01725-SP1-100CM can also be used in the other direction and will be right angle MCX plug to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to MCX cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC female bulkhead to 75 Ohm push-on MCX plug right angle cable 100 cm length using 75 Ohm RG179 coax. |
| 114 | ||
| PE70MP1100 | Pasternack Enterprises | Key Specifications, Connector In Series: BNC, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: BNC, Connector Out Gender: Female, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 7.5 dB. 50 Ohm BNC Male to 75 Ohm BNC Female Matching Pad Operating from DC to 3 GHz. RF impedance matching pad (also referred to as coaxial matching pad) PE70MP1100 from Pasternack has BNC connector in and is 50 Ohm, BNC connector out and is 75 Ohm. This coaxial BNC to BNC impedance matching pad has a male BNC in and a female BNC out. Our 50 Ohm BNC to 75 Ohm BNC impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm BNC male to 75 Ohm BNC female RF impedance matching pad design has a maximum attenuation of 7.5. Body material of the 50 Ohm BNC to 75 Ohm BNC matching pad is brass. 50 Ohm BNC male to 75 Ohm BNC female RF impedance pad PE70MP1100 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 0.5 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with BNC to BNC connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 3 | ||
| PEWCP1100N-30 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-90, Flange Size: None Flange, Flange Type : UG Cover Flange, Flange Group : Standard, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.35:1, Maximum Insertion Loss: 0.2 dB, Coupling: 30 dB. WR-90 Waveguide 30 dB Loop Coupler, UG Cover Flange, N Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. Pasternack’s PEWCP1100N-30 is a WR-90 directional loop coupler. This directional waveguide coupler has type N connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 8.2 GHz and 12.5 GHz. The PEWCP1100N-30 WR-90 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 30 dB. This 30 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-90 directional waveguide coupler is rated for a maximum input power (CW) of 1,000 Watts. This 12.5 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-90 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 100,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1100N-30 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 1,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG cover flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a UG cover flange has a minimum coupler directivity of 15 dB. This WR-90 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 2 | ||
| PEWCP1100S-30 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-90, Flange Size: None Flange, Flange Type : UG Cover Flange, Flange Group : Standard, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.35:1, Maximum Insertion Loss: 0.2 dB, Coupling: 30 dB. WR-90 Waveguide 30 dB Loop Coupler, UG Cover Flange, SMA Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. Pasternack’s PEWCP1100S-30 is a WR-90 directional loop coupler. This directional waveguide coupler has SMA connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 8.2 GHz and 12.5 GHz. The PEWCP1100S-30 WR-90 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 30 dB. This 30 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-90 directional waveguide coupler is rated for a maximum input power (CW) of 1,000 Watts. This 12.5 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-90 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 100,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1100S-30 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 1,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG cover flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a UG cover flange has a minimum coupler directivity of 15 dB. This WR-90 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 2 | ||
| PEWCP1100S-50 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-90, Flange Size: None Flange, Flange Type : UG Cover Flange, Flange Group : Standard, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.35:1, Maximum Insertion Loss: 0.2 dB, Coupling: 50 dB. WR-90 Waveguide 50 dB Loop Coupler, UG Cover Flange, SMA Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. Pasternack’s PEWCP1100S-50 is a WR-90 directional loop coupler. This directional waveguide coupler has SMA connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 8.2 GHz and 12.5 GHz. The PEWCP1100S-50 WR-90 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 50 dB. This 50 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-90 directional waveguide coupler is rated for a maximum input power (CW) of 1,000 Watts. This 12.5 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-90 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 100,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1100S-50 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 1,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG cover flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a UG cover flange has a minimum coupler directivity of 15 dB. This WR-90 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 1 | ||
| PEWCP1100N-40 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-90, Flange Size: None Flange, Flange Type : UG Cover Flange, Flange Group : Standard, Minimum Frequency: 8.2 GHz, Maximum Frequency: 12.5 GHz, Maximum VSWR: 1.35:1, Maximum Insertion Loss: 0.2 dB, Coupling: 40 dB. WR-90 Waveguide 40 dB Loop Coupler, UG Cover Flange, N Female Coupled Port, 8.2 GHz to 12.5 GHz, Aluminum. Pasternack’s PEWCP1100N-40 is a WR-90 directional loop coupler. This directional waveguide coupler has type N connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 8.2 GHz and 12.5 GHz. The PEWCP1100N-40 WR-90 waveguide coupler is a great option for test benches, radar, satellite, microwave radio, attenuation measurements, power measurements and source leveling applications. This waveguide loop coupler has a coupling accuracy of 40 dB. This 40 dB waveguide coupler has an aluminum body with chromate conversion plating. Our WR-90 directional waveguide coupler is rated for a maximum input power (CW) of 1,000 Watts. This 12.5 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this WR-90 waveguide coupler are on our downloadable PDF datasheet above. This directional waveguide coupler has 100,000 Watts of peak power along with a directivity of 15 dB. The PEWCP1100N-40 loop coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our 1,000 Watts (CW) waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG cover flange which is made up of aluminum material with chromate conversion plating. The waveguide coupler with a UG cover flange has a minimum coupler directivity of 15 dB. This WR-90 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same business day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal directional loop coupler for your requirement. |
| 1 | ||
| PE3W03732/SP1-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable Using LMR-400 Coax with HeatShrink and 90 Deg. Clock in 100CM., Radio frequency assembly N male right angle to TNC male right angle low loss cable using LMR-400 coax with heatshrink and 90 deg. clock in 100CM from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to TNC male right angle low loss cable using LMR-400 coax with heatshrink and 90 deg. clock in 100CM, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle N type cable connection on one end and right angle TNC cable connection on the other. Our right angle type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This N type to TNC cable is a male to male coax assembly, PE3W03732/SP1-100CM, can also be known as a right angle type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W03732/SP1-100CM is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03732/SP1-100CM can also be used in the other direction and will be right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable using LMR-400 coax with heatshrink and 90 deg. clock in 100CM. |
| 0 | ||
| PE2CP1100 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 4 GHz, Maximum Frequency: 18 GHz, Maximum Input Power: 50 Watt, Coupling Value: 6 dB. Directional 6 dB SMA Coupler From 4 GHz to 18 GHz Rated to 50 Watts. RF coupler part number PE2CP1100 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 4 GHz and a maximum frequency of 18 GHz. Directional coupler part # PE2CP1100 is constructed with a coupling value of 6 dB and a coupler directivity of 12 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.5 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.5 dB and a maximum VSWR of 1.5. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1100 directional 6 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 0 | ||
![]() Venkel Ltd. | UPTF2010-2W-P-1100BT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | ||
| HPTF2010-UP-1100AT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;110R;�0.05% RoHS : Compliant | 0 | |||
| UPTF2512-2W-P-1100AT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�5PPM;110R;�0.05% RoHS : Compliant | 0 | |||
| MELFC0204-TP-1100BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | |||
| HPTF0805-RP-1100UT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�5PPM;110R;�0.01% RoHS : Compliant | 0 | |||
| HPTF0805-RP-1100DT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�5PPM;110R;�0.5% RoHS : Compliant | 0 | |||
| UPTF2512-2W-P-1100CT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�5PPM;110R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-1100AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;110R;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-1100CT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;110R;�0.25% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-1100DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;110R;�0.5% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-1100AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;110R;�0.05% RoHS : Compliant | 0 | |||
| HPTF0603-QP-1100BT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | |||
| UPTF2512-2W-P-1100BT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-1100AT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;110R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-1100BT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;110R;�0.1% RoHS : Compliant | 0 | |||
![]() Vyrian | CLP-110-02-F-D-BE-A-K | Samtec Inc | Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Socket RoHS : Compliant | 13,127 | ||
P1100SCLRP![]() | Littelfuse Inc | Thyristor Surge Protector RoHS : Compliant | 12,641 | |||
| CLP-110-02-F-DH-A-TR | Samtec Inc | Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Socket RoHS : Compliant | 11,686 | |||
| P1100EBLAP | Littelfuse Inc | SIDAC, 130V V(BO) Max RoHS : Compliant | 11,059 | |||
| NP1100SCT3G | onsemi | Thyristor Surge Protector, 130V V(BO) Max, DO-214AA RoHS : Compliant | 10,584 | |||
P1100ECMCLRP1![]() | Littelfuse Inc | Thyristor Surge Protector, 130V V(BO) Max, 30A RoHS : Compliant | 9,577 | |||
| A9P11-0031 | OMRON Corporation | Pushbutton Switch, SPDT, On-on, Alternate, 0.05A, 60VDC, 5 PCB Hole Cnt, Solder Terminal, Through Hole-straight RoHS : Compliant | 9,382 | |||
| CLP-110-02-F-D-A-K | Samtec Inc | Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Socket RoHS : Compliant | 8,621 | |||
| P1100GALRP | Littelfuse Inc | Thyristor Surge Protector, 130V V(BO) Max, DO-15 RoHS : Compliant | 8,510 | |||
| P1100ECMCAP | Littelfuse Inc | 7,116 | ||||
P1100EALRP2![]() | Littelfuse Inc | Thyristor Surge Protector, 130V V(BO) Max, 20A, TO-92 RoHS : Compliant | 6,341 | |||
| P1100Q12BLRP | Littelfuse Inc | Thyristor Surge Protector RoHS : Compliant | 5,315 | |||
| CLP-110-02-L-D-P-FR | Samtec Inc | Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket RoHS : Compliant | 725 | |||
| CHP1-1001002F7LF | Tt Electronics Plc | Fixed Resistor, Metal Glaze/thick Film, 1W, 10000ohm, 350V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 2512 | 492 | |||
| RF179-74BJ3-72RP1-1000 | Samtec Inc | Cable Assembly RoHS : Compliant | 402 | |||
![]() Waytek, Inc. | 175-P1-100-2 | MP | 100A Manual Push to Trip Reset 1/4" Stud 90° Panel Mount Circuit Breaker |
| 62 | |
| 875-P1-100-2 | MP | Panel Mount High Amp Circuit Breaker, Type III, On-Off 100 Amps, 48VDC |
| 43 | ||
![]() Win Source Electronics | DMP1100UCB4-7![]() | Diodes Incorporated | MOSFET P-CHA 12V 2.5A WLB0808 / Qualified to AEC-Q101 Standards for High Reliability RoHS : Compliant |
| 990,000 | |
P1100SDLRP![]() | Littelfuse Inc | SIDACTOR BI 90V 1000A DO214 RoHS : Compliant |
| 10,000 | ||
| 3006P-1-100LF | Bourns Inc | TRIMMER 10 OHM 0.75W PC PIN SIDE RoHS : Compliant |
| 2,000 | ||
| TLMP1100-GS08 | Vishay Huntington | LED GREEN 0603 SMD / Standard 0603 SMD LED |
| 100 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |