P10G-TN3-R Price, nhà phân phối, Stock

Key Specifications, Antenna Type: Log Periodic, Polarization: Vertical, Minimum Frequency: 617 MHz, Maximum Frequency: 2.7 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Nominal Gain: 10 dBi, Maximum Input VSWR: 2:1. 10-10-11 dBi Log Periodic Antenna 617-698 MHz, 698-960 MHz, 1.71-2.7 GHz, N Type Female, V-pol, 1.5:1 Typ VSWR., Pasternack’s PEANLP1003 directional log periodic, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 10-10-11 dBi log periodic Antenna operates within a range of 617 MHz-2.7 GHz and comes with N Type female Connector which is ideal for boosting 5G, LTE, CMDA, LoRA, IoT and WIFI. Manufactured to the highest international standards, our commercial grade, vertical polarized log periodic antenna with heavy duty steel mast mounting brackets and a lightweight abs radome is ideally suited for all weather operation. The directional antenna with band 1 frequency range of 617 MHz to 698 MHz, gain of 10, VSWR max of 2:1 at F1; and band 2 with a frequency range of 698 MHz to 960 MHz, gain of 10 and VSWR max of 2:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PEANLP1003 antenna has a F1 HPBW Vertical Elevation of 50 Degrees, F2 HPBW Vertical Elevation of 50 Degrees and a HPBW Horizontal Azimuth of 75 Degrees with 50 Watts max input power. The multi band directional antenna has a type N female standard polarity threaded connector, gain nominal of 10-10-11 dBi gain and can be used to boost cellular LTE signals. The model PEANLP1003 designed specifically for the outdoors has an operational temperature between -40° to 70° deg C, and can withstand a wind velocity of up to 150 MPH. Ideal for boosting existing cellular signals to reach further distances, the antenna has an impedance of 50 Ohms and max input power of 50 Watts. Built tough, this Type N connector has an overall length of 17.5in, width of 1.5in, and weighs 1.05lbs. The mounting pole diameter is between 1.57in - 1.97in, and operates on the 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz cellular band. Pasternack’s PEANLP1003 with white colored abs Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PEANLP1003 is a directional series antenna with a multi band type and has a 10-10-11 dBi gain nominal. The included mounting bracket and hardware for this multi band log periodic antenna with abs radome, makes it very easy to install. The directional 700 MHz, 800 MHz, 900 MHz, 1.7 GHz, 1.9 GHz, 2 GHz, 2.7 GHz band antenna with vertical polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 10-10-11 dBi directional 617 MHz-2.7 GHz N Type female connector antennas. Order our LTE outdoor directional antenna PEANLP1003, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx.

1 : $190.99
25 : $181.44
50 : $171.89
100 : $164.25

112

PE2CP1034

Pasternack Enterprises

1 : $181.99
10 : $174.71
25 : $167.43

PE73SP1023

Pasternack Enterprises

Key Specifications, Impedance: 50 Ohm, Connector In Series: N, Connector In Gender: Male, Connector Out Series: N, Connector Out Gender: Female, Minimum Frequency: 125 MHz, Maximum Frequency: 1 GHz, Maximum Input Power: 375 Watts, Direction: Directional, Throughput Energy: 220 uJ. Type N M/F In/Out Coax RF Surge Protector, 125MHz - 1GHz, DC Block, 375W, 20kA, Blocking Cap and Gas Tube., RF coaxial surge protector (sometimes referred to as a lightning arrestor or surge suppressor) PE73SP1023 from Pasternack is in-stock and will ship same business day as it is purchased. This radio frequency coax surge protector suppressor protects against high electromagnetic pulses (EMP) / power surges that are typically caused by lightning or severe electrical changes. Our Type N M/F in/out coax RF surge protector, 125MHz - 1GHz, DC block, 375W, 20kA, blocking cap and gas tube is typically used with a RF system of one or more components exposed to the outdoors, like an antenna. The coaxial lightning surge arrestor is designed to pass through the desired frequency range while protecting the RF equipment from DC surges. This Pasternack coax surge protector PE73SP1023 is 50 Ohm and has a type N input. The 50 Ohm type N surge protector is a male gender for input and N type in female for output. Our N type M/F surge protectors utilize blocking cap and gas tube protection technology. The frequency range of this blocking cap and gas tube type N M/F lightning surge arrestor is 125 MHz to 1 GHz. Power handling maximum of PE73SP1023 is 375 W. The Pasternack 375 Watts type N surge suppressor is rated at 220 uJ let-through. This coax lightning protection component has a 600 maximum voltage. Additional product specs and CAD drawing with dimensions for this male to female type N surge protector from Pasternack can be found in the details of the specifications datasheet PDF on this page. Pasternack is a supplier of one of the broadest and deepest inventory of RF, microwave and millimeter wave components available for shipping same business day. Our ISO 9001:2008 registered facilities will ship the coaxial surge protector components from stock the business day of your purchase. Expert technical support and a friendly, knowledgeable sales team are here to help you with your RF requirements. These and many other reasons are why Pasternack is one of the best websites where to find and buy coaxial N type surge protector products.

1 : $21.39
25 : $20.32
50 : $19.25
100 : $18.4

PEWCP1082-50

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-159, Flange Size: None, Flange Type : CPR-159F, Minimum Frequency: 4.64 GHz, Maximum Frequency: 7.05 GHz, Maximum VSWR: 1.25:1, Coupling: 50 dB. WR-159 Waveguide 50 dB Crossguide Coupler, CPR-159F Flange, N Female Coupled Port, 4.64 GHz to 7.05 GHz, Aluminum. The PEWCP1082-50 is a 50 dB WR-159 three port crossguide coupler with intergrated N Female connector for the coupled port. This coupler can be mounted directly into the waveguide signal path, connected via coax to allow signal sampling /monitoring. The coupler has a typical VSWR of 1.1:1 and are made of Aluminum with CPR-159F flanges. The PEWCP1082-50 is part of a family of cross guide couplers offered by Pasternack with coupling values ranging from 20 to 50 dB.

1 : $2,020.0
5 : $1,939.2
10 : $1,858.4
25 : $1,777.6

PE8DP1006

Pasternack Enterprises

Key Specifications, Filter Impedance: 75 Ohm, LP Passband Frequency, Min: 5 MHz, LP Passband Frequency, Max: 42 MHz, HP Passband Frequency, Min: 54 MHz, HP Passband Frequency, Max: 1.25 GHz, Connector Series: F, Connector Gender: Female, Connector Group: Threaded, Filter Length: 2.933 in, Filter Width: 1.299 in, Filter Height: 0.705 in, LP Return Loss, Min: 14 dB, HP Return Loss, Min: 12 dB, LP Insertion Loss, Max: 2.2 dB, HP Insertion Loss, Max: 2.2 dB. Diplexer 75 Ohm Type F Female, 5 to 42 MHz Low Pass, 54 to 1250 MHz High Pass., The Pasternack PE8DP1006 diplexer with 75 Ohm impedance is a passive RF device that enables frequency-domain multiplexing and covers different low-pass and high-pass frequency bands depending on the end-user applications. This is a 3-port device that has good insertion loss and VSWR performance with one low pass 5 MHz to 42 MHz frequency port, one high pass 54 MHz to 1.25 GHz frequency port, and one common port. Pasternack’s high pass 54 MHz to 1.25 GHz diplexer filter has a threaded type F female connector that is rugged and vibration resistant. The PE8DP1006 threaded type RF diplexer body has a polished surface finish that provides uniformity of surfaces and increases aesthetics. The filter has a 2.933 in length, a 1.299 in width, and a height of 0.705 in making it the best fit for satellite TV and cable TV applications. PE8DP1006 diplexer has a minimum low pass return loss of 14 dB, a minimum high pass return loss of 12 dB, maximum low pass insertion loss of 2.2 dB, and maximum high pass insertion loss of 2.2 dB which indicates that the line is well matched and gives better performance compared to the low-cost options in the market space. The body of this 75 Ohm RF diplexer with F female threaded type connectors is made of zinc. This Pasternack PE8DP1006 RF diplexer with 75 Ohm impedance is in stock and ready to ship the same day you order. Based on your specifications, our expert technical support and highly trained sales team can find the ideal 75 Ohm zinc diplexer with threaded type F female connector.

1 : $149.99
10 : $143.99
25 : $137.99
100 : $131.99

PE73SP1025

Pasternack Enterprises

Key Specifications, Impedance: 50 Ohm, Connector In Series: N, Connector In Gender: Female, Connector Out Series: N, Connector Out Gender: Female, Minimum Frequency: 1.5 MHz, Maximum Frequency: 700 MHz, Maximum Input Power: 2,000 Watts, Direction: Directional, Throughput Energy: 3,500 uJ. Type N F/F In/Out Coax RF Surge Protector, 1.5MHz - 700MHz, DC Block, 2kW, 50kA, Blocking Cap and Gas Tube., RF coaxial surge protector (sometimes referred to as a lightning arrestor or surge suppressor) PE73SP1025 from Pasternack is in-stock and will ship same business day as it is purchased. This radio frequency coax surge protector suppressor protects against high electromagnetic pulses (EMP) / power surges that are typically caused by lightning or severe electrical changes. Our Type N F/F in/out coax RF surge protector, 1.5MHz - 700MHz, DC block, 2kW, 50kA, blocking cap and gas tube is typically used with a RF system of one or more components exposed to the outdoors, like an antenna. The coaxial lightning surge arrestor is designed to pass through the desired frequency range while protecting the RF equipment from DC surges. This Pasternack coax surge protector PE73SP1025 is 50 Ohm and has a type N input. The 50 Ohm N type surge protector is a female gender for input and type N in female for output. Our type N F/F surge protectors utilize blocking cap and gas tube protection technology. The frequency range of this blocking cap and gas tube type N F/F lightning surge arrestor is 1.5 MHz to 700 MHz. Power handling maximum of PE73SP1025 is 2,000 W. The Pasternack 2,000 Watts N type surge suppressor is rated at 3500 uJ let-through. This coax lightning protection component has a 600 maximum voltage. Additional product specs and CAD drawing with dimensions for this female to female type N surge protector from Pasternack can be found in the details of the specifications datasheet PDF on this page. Pasternack is a supplier of one of the broadest and deepest inventory of RF, microwave and millimeter wave components available for shipping same business day. Our ISO 9001:2008 registered facilities will ship the coaxial surge protector components from stock the business day of your purchase. Expert technical support and a friendly, knowledgeable sales team are here to help you with your RF requirements. These and many other reasons are why Pasternack is one of the best websites where to find and buy coaxial N type surge protector products.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

PEWCP1085N-40

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-75, Flange Size: None, Flange Type : UG Cover, Minimum Frequency: 9.84 GHz, Maximum Frequency: 15 GHz, Maximum VSWR: 1.25:1, Coupling: 40 dB. WR-75 Waveguide 40 dB Crossguide Coupler, UG Cover Flange, N Female Coupled Port, 9.84 GHz to 15 GHz, Brass. The PEWCP1085N-40 is a 40 dB WR-75 three port crossguide coupler with intergrated N Female connector for the coupled port. This coupler can be mounted directly into the waveguide signal path, connected via coax to allow signal sampling /monitoring. The coupler has a typical VSWR of 1.1:1 and are made of Brass with UG Cover flanges. The PEWCP1085N-40 is part of a family of cross guide couplers offered by Pasternack with coupling values ranging from 20 to 50 dB.

1 : $1,580.0
5 : $1,516.8
10 : $1,453.6
25 : $1,390.4

PEANFP1054

Pasternack Enterprises

Key Specifications. Antenna Type Flat Panel Polarization RHCP Minimum Frequency 902 MHz Maximum Frequency 928 MHz Connector 1 Polarity Standard Connector Series SMA Connector Gender Male Impedance 50 Ohm Maximum Input VSWR 1.3:1. 902 to 928 MHz RFID Flat Panel Antenna, RHCP, 9 dBi, White ABS, SMA Male, IP54. Pasternack's PEANFP1054 is a RHCP RFID flat panel antenna. The PEANFP1054 with a 9 dBi gain nominal is a Directional antenna. Our 902 to 928 MHz antenna has SMA Male connector, With an impedance of 50 Ohms and max input power of 50 Watts, the PEANFP1054 flat panel RHCP antenna is well suited for Radio Frequency Identification tag reading applications. This 902-928 MHz 9 dBi gain RFID antenna is highly directional providing the reader radio the capabilities of simultaneously reading a multitude of RFID tags with a high degree of accuracy, Pasternack's RFID PEANFP1054 has a radome made of ABS in White color and comes from a facility certified to ISO 9001:2015. This SMA Male connectized Antenna has an overall length of 10 in, width of 10 in, and weighs 1.87 lbs. Use our on-line ordering system to purchase your PEANFP1054 RFID Directional RHCP antenna 24 hours a day with same-day shipping and no MOQs (minimum order quantities).

1 : $177.99
10 : $170.87
25 : $163.75
100 : $156.63

PE2CP1057A

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: N, Connector Gender: Female, Minimum Frequency: 380 MHz, Maximum Frequency: 4 GHz, Maximum Input Power: 200 Watt, Coupling Value: 6 dB. Low PIM Directional 6 dB N Coupler To 4 GHz Rated to 200 Watts. RF coupler part number PE2CP1057A from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with type N ports. Our directional coupler design uses type N ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 380 MHz and a maximum frequency of 4 GHz. Directional coupler part # PE2CP1057A is constructed with a coupling value of 6 dB and a coupler directivity of 17 dB. This female type N directional coupler is built with a maximum insertion loss of 0.3 dB and a maximum input power of 200 watts. Our directional coupler design with type N connector is rated for a maximum insertion loss of 0.3 dB and a maximum VSWR of 1.22. Additional female N type coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1057A directional 6 dB type N coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $877.99
5 : $842.87
10 : $807.75
25 : $772.63

PEWCP1089-40

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-28, Flange Size: None, Flange Type : UG Cover, Minimum Frequency: 26.5 GHz, Maximum Frequency: 40 GHz, Maximum VSWR: 1.25:1, Coupling: 30 dB. WR-28 Waveguide 40 dB Crossguide Coupler, UG Cover Flange, UG Cover Flange Coupled, 26.5 GHz to 40 GHz, Brass. The PEWCP1089-40 is a 40 dB WR-28 three port crossguide coupler with intergrated UG Cover Flange for the coupled port. This coupler can be mounted directly into the waveguide signal path, connected via waveguide to allow signal sampling /monitoring. The coupler has a typical VSWR of 1.1:1 and are made of Brass with UG Cover flanges. The PEWCP1089-40 is part of a family of cross guide couplers offered by Pasternack with coupling values ranging from 20 to 50 dB.

1 : $2,160.0
5 : $2,073.6
10 : $1,987.2
25 : $1,900.8

PEWCP1052A

Pasternack Enterprises

1 : $989.99
5 : $950.39
10 : $910.79
25 : $871.19

PE51MP1009

Pasternack Enterprises

Key Specifications, Antenna Type: Vehicular, Polarization: Linear, Vertical, Minimum Frequency: 144 MHz, Maximum Frequency: 174 MHz, Connector Series: NMO Mount, Impedance: 50 Ohm, Maximum Input VSWR: 2:1.

1 : $121.99
25 : $109.79
50 : $97.59
100 : $85.39

PEWCP1059

Pasternack Enterprises

1 : $706.99
5 : $678.71
10 : $650.43

PE2CP1024-6

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 800 MHz, Maximum Frequency: 2.5 GHz, Maximum Input Power: 50 Watt, Coupling Value: 6 dB. Directional 6 dB SMA Coupler From 800 MHz to 2.5 GHz Rated to 50 Watts. RF coupler part number PE2CP1024-6 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 800 MHz and a maximum frequency of 2.5 GHz. Directional coupler part # PE2CP1024-6 is constructed with a coupling value of 6 dB and a coupler directivity of 20 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.5 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.5 dB and a maximum VSWR of 1.25. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1024-6 directional 6 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $640.99
10 : $615.35
25 : $589.71

PE73SP1029

Pasternack Enterprises

Key Specifications, Impedance: 50 Ohm, Connector In Series: N, Connector In Gender: Female, Connector Out Series: N, Connector Out Gender: Female, Minimum Frequency: 125 MHz, Maximum Frequency: 1 GHz, Maximum Input Power: 200 Watts, Direction: Directional, Throughput Energy: 250 uJ. Type N F/F In/Out Bulkhead Coax RF Surge Protector, 125MHz - 1GHz, DC Block, 200W, 50kA, Blocking Cap and Gas Tube., RF coaxial surge protector (sometimes referred to as a lightning arrestor or surge suppressor) PE73SP1029 from Pasternack is in-stock and will ship same business day as it is purchased. This radio frequency coax surge protector suppressor protects against high electromagnetic pulses (EMP) / power surges that are typically caused by lightning or severe electrical changes. Our Type N F/F in/out bulkhead coax RF surge protector, 125MHz - 1GHz, DC block, 200W, 50kA, blocking cap and gas tube is typically used with a RF system of one or more components exposed to the outdoors, like an antenna. The coaxial lightning surge arrestor is designed to pass through the desired frequency range while protecting the RF equipment from DC surges. This Pasternack coax surge protector PE73SP1029 is 50 Ohm and has a type N input. The 50 Ohm type N surge protector is a female gender for input and N type in female for output. Our type N F/F surge protectors utilize blocking cap and gas tube protection technology. The frequency range of this blocking cap and gas tube type N F/F lightning surge arrestor is 125 MHz to 1 GHz. Power handling maximum of PE73SP1029 is 200 W. The Pasternack 200 Watts N type bulkhead surge suppressor is rated at 250 uJ let-through. This coax lightning protection component has a 330 maximum voltage. Additional product specs and CAD drawing with dimensions for this female to female N type surge protector from Pasternack can be found in the details of the specifications datasheet PDF on this page. Pasternack is a supplier of one of the broadest and deepest inventory of RF, microwave and millimeter wave components available for shipping same business day. Our ISO 9001:2008 registered facilities will ship the coaxial surge protector components from stock the business day of your purchase. Expert technical support and a friendly, knowledgeable sales team are here to help you with your RF requirements. These and many other reasons are why Pasternack is one of the best websites where to find and buy coaxial type N bulkhead surge protector products.

1 : $38.99
10 : $37.43
25 : $35.87

Teledyne HiRel

CY37064P100-125AXC

Teledyne HiRel

PLD, 64 MACROCELL, ELECTRICALLY ALTERABLE, 150 MHZ TOGGLE SPEED

Venkel Ltd.

MELFC0204-TP-1023BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�5PPM;102K;�0.1%
RoHS : Compliant

MELFC0204-ZP-1002CT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�5PPM;10K;�0.25%
RoHS : Compliant

UPTF0402-16W-P-1000DT

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�5PPM;100R;�0.5%
RoHS : Compliant

UPTF0402-16W-P-1021AT

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�5PPM;1.02K;�0.05%
RoHS : Compliant

UPTF0402-16W-P-1090BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�5PPM;109R;�0.1%
RoHS : Compliant

UPTF0402-16W-P-1091UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�5PPM;1.09K;�0.01%
RoHS : Compliant

UPTF0603-16W-P-1011BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;1.01K;�0.1%
RoHS : Compliant

UPTF0603-16W-P-1012UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;10.1K;�0.01%
RoHS : Compliant

UPTF0603-16W-P-1021BT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;1.02K;�0.1%
RoHS : Compliant

UPTF0603-16W-P-1022UT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;10.2K;�0.01%
RoHS : Compliant

UPTF0603-16W-P-1052CT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;10.5K;�0.25%
RoHS : Compliant

UPTF0603-16W-P-1060DT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;106R;�0.5%
RoHS : Compliant

UPTF0805-10W-P-1022CT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;10.2K;�0.25%
RoHS : Compliant

UPTF0805-10W-P-1040BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;104R;�0.1%
RoHS : Compliant

UPTF0805-10W-P-1041UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;1.04K;�0.01%
RoHS : Compliant

Vyrian

NCP1075ABP100G

onsemi

Switching Controller, Current-mode, 110kHz Switching Freq-Max, MOS, PDIP7
RoHS : Compliant

12,023

NCP1079ABP100G

onsemi

Switching Controller, Current-mode, 110kHz Switching Freq-Max, MOS, PDIP7
RoHS : Compliant

11,161

NCP1072P100BG

onsemi

Switching Controller, Current-mode, 100kHz Switching Freq-Max, PDIP7
RoHS : Compliant

11,110

NCP1053P100

onsemi

Switching Regulator, Voltage-mode, 2A, 113kHz Switching Freq-Max, PDIP8
RoHS : Not Compliant

10,612

NCP1027P100G

onsemi

Switching Regulator, Current-mode, 0.8A, 110kHz Switching Freq-Max, PDIP8
RoHS : Compliant

9,689

NCP1051P100

onsemi

Switching Regulator, Voltage-mode, 2A, 113kHz Switching Freq-Max, PDIP8
RoHS : Not Compliant

8,839

NCP1050P100

onsemi

Switching Regulator, Voltage-mode, 2A, 113kHz Switching Freq-Max, PDIP8
RoHS : Not Compliant

8,749

NCP1013AP100G

onsemi

Switching Regulator, Current-mode, 1A, 110kHz Switching Freq-Max, PDIP7
RoHS : Compliant

7,914

NCP1055P100G

onsemi

Switching Regulator, Voltage-mode, 2A, 113kHz Switching Freq-Max, PDIP8
RoHS : Compliant

6,673

NCP1012AP100G

onsemi

Switching Regulator, Current-mode, 1A, 110kHz Switching Freq-Max, PDIP7
RoHS : Compliant

6,062

NCP1014AP100

onsemi

Switching Regulator, Current-mode, 1A, 110kHz Switching Freq-Max, PDIP7
RoHS : Not Compliant

5,875

NCP1079BAP100G

onsemi

Switching Controller, Current-mode, 110kHz Switching Freq-Max, MOS, PDIP7
RoHS : Compliant

5,586

NCP1077ABP100G

onsemi

Switching Controller, Current-mode, 110kHz Switching Freq-Max, MOS, PDIP7
RoHS : Compliant

4,978

NCP1053P100G

onsemi

Switching Regulator, Voltage-mode, 2A, 113kHz Switching Freq-Max, PDIP8
RoHS : Compliant

4,653

NCP1014AP100G

onsemi

Switching Regulator, Current-mode, 1A, 110kHz Switching Freq-Max, PDIP7
RoHS : Compliant

4,026

Waytek, Inc.

AL-MP-1000-0-C-5M

Advanced Cable Ties Inc

ACT AL-MP-1000-0-C-5M cable tie mounting base is a black 1" mount designed to anchor cable ties to panels and flat surfaces. It features a square base, four-way tie entry, and rubber adhesive backing for organized wire routing and harness support in general-purpose installations.

100 : $0.24
200 : $0.2218
500 : $0.2016
1,000 : $0.1865
5,000 : $0.1777

18,500

AL-MP-1000-9-C-5M

Advanced Cable Ties Inc

ACT AL-MP-1000-9-C-5M cable tie mounting base is a natural nylon mount designed to anchor cable ties to panels and flat surfaces. It features a square base, four-way tie entry, and a screw-mount style for organized wire routing and harness support in general-purpose installations.

50 : $0.2754
200 : $0.2552
500 : $0.2313
1,000 : $0.2142
5,000 : $0.2038

8,168

MP10B23F

Amphenol Sine Systems

Amphenol Sine Systems MP10B23F machined male pin terminal is a gold-plated RADSOK contact for 12-10 Ga. wire. Made from copper alloy, this size 16 pin terminal is rated up to 35A for MagnaMate ATHP connector assemblies.

1 : $1.2056
10 : $1.1286
50 : $1.0736
100 : $0.9746
200 : $0.9416
500 : $0.9086

3,932

321-A2P-10 BCC

Short Stop Circuit Breaker, Type 1, In-Line Mounting Bracket, 10A, 14VDC

1 : $2.8679
10 : $2.6061
50 : $2.3681
100 : $2.2253
200 : $2.0944
500 : $1.9992

500

175-P1-060-2

60A Manuel Push to Trip Reset 1/4" Stud 90° Panel Mount disc way, no repl

1 : $22.74
5 : $21.83
10 : $20.91
50 : $20.15
100 : $19.54
200 : $19.09

137

875-P1-080-2

Panel Mount High Amp Circuit Breaker, Type III, On-Off, 80 Amps, 48VDC