 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LF10M7CAA0-R0 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Avnet Americas | MLF1005G1R0KT000 | TDK Corporation | - Tape and Reel (Alt: MLF1005G1R0KT000) RoHS : Compliant |
| 10,000 | |
| MLF1005G1R8KT000 | TDK Corporation | Multilayer Inductor, 1.8 uH, 750 Milliohm, ? 10%, 180 MHz, 30 mA, 0402 [1005 Metric] - Tape and Reel (Alt: MLF1005G1R8KT000) RoHS : Compliant |
| 10,000 | ||
| LF10WBP-12S(31) | Hirose Electric Co Ltd | - Trays (Alt: LF10WBP-12S(31)) RoHS : Compliant |
| 46 | ||
| RLF100-11/12 | ebm-papst | Fan Blower, Centrifugal, 12 VDC, DC, 127 mm, 25 mm, 37.7 CFM - Bulk (Alt: RLF100-11/12) RoHS : Compliant |
| 0 | ||
| LF10WBP-12S(33) | Hirose Electric Co Ltd | Connector Circular Shielded Small Waterproof Socket 12 Position Solder Straight Cable Mount 12 Term - Trays (Alt: LF10WBP-12S(33)) RoHS : Compliant |
| 0 | ||
| MK02FN128VLF10 | NXP Semiconductors | - Trays (Alt: MK02FN128VLF10) RoHS : Compliant |
| 0 | ||
| ITS4106R18-12SWB1ZLF10F7 | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS4106R18-12SWB1ZLF10F7) RoHS : Not Compliant |
| 0 | ||
| ITS4108R18-19SB1ZLF10F7 | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS4108R18-19SB1ZLF10F7) RoHS : Not Compliant |
| 0 | ||
| ITS41030A18-12PWB1ZLF10F7 | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS41030A18-12PWB1ZLF10F7) RoHS : Not Compliant |
| 0 | ||
| RLF100-11/14/2U | ebm-papst | Fan Blower, Centrifugal, 24 VDC, DC, 127 mm, 25 mm, 37.7 CFM - Bulk (Alt: RLF100-11/14/2U) RoHS : Compliant |
| 0 | ||
| BLF10H6600PU | Flip Electronics | LDMOS POWER TRANSISTOR - Trays (Alt: BLF10H6600PU) RoHS : Compliant |
| 0 | ||
| IS61NLF102418-7.5TQLI-TR | Integrated Silicon Solution Inc | SRAM Chip Sync Dual 3.3V 18M-Bit 1M x 18 7.5ns 100-Pin TQFP T/R - Tape and Reel (Alt: IS61NLF102418-7.5TQLI-TR) RoHS : Not Compliant |
| 0 | ||
| ITS41030A18-12PB1ZLF10F7 | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS41030A18-12PB1ZLF10F7) RoHS : Not Compliant |
| 0 | ||
| LF10WBPD-12P(35) | Hirose Electric Co Ltd | - Bulk (Alt: LF10WBPD-12P(35)) RoHS : Not Compliant |
| 0 | ||
| MLF1005GR39KTD25 | TDK Corporation | - Tape and Reel (Alt: MLF1005GR39KTD25) RoHS : Compliant |
| 0 | ||
 Newark | MLF1005VR15JTD25 | TDK Corporation | INDUCTOR, AEC-Q200, 0.15UH, 350MHZ, 0402; RoHS : Compliant |
| 6,208 | |
| MLF1005VR15JTD25 | TDK Corporation | INDUCTOR, AEC-Q200, 0.15UH, 350MHZ, 0402; RoHS : Compliant |
| 6,208 | ||
| MLF1005VR47JT000 | TDK Corporation | INDUCTOR, 0.47UH, 190MHZ, SHLD, 0402; RoHS : Compliant |
| 248 | ||
| MLF1005VR47JT000 | TDK Corporation | INDUCTOR, 0.47UH, 190MHZ, SHLD, 0402; RoHS : Compliant |
| 248 | ||
| LF10WBP-4S(31) | Hirose Electric Co Ltd | CIRCULAR CONNECTOR, PLUG, 4POS, CABLE; RoHS : Compliant |
| 75 | ||
| LF10WBP-12S(33) | Hirose Electric Co Ltd | CIRCULAR CONN, PLUG, 12POS, SOLDER; RoHS : Compliant |
| 41 | ||
| SLF10145T-101M1R0-PF | TDK Corporation | INDUCTOR, 100UH, 1.1A, 20%, WIREWOUND; Available until stocks are exhausted RoHS : Compliant |
| 21 | ||
| SLF10145T-101M1R0-PF | TDK Corporation | INDUCTOR, 100UH, 1.1A, 20%, WIREWOUND; Available until stocks are exhausted RoHS : Compliant |
| 21 | ||
| LF10WBR-12PC | Hirose Electric Co Ltd | CIRCULAR CONN, RCPT, 12POS, CRIMP; RoHS : Compliant |
| 17 | ||
| TLF100P3CQP | Banner Engineering Corp | SIGNAL TOWER, 3 STACK, 30VDC, QC; No. of Stacks / Tiers:3; Module Lens Colour:Green, Red, Yellow; Supply Voltage VAC:-; Supply Voltage VDC:30V; Visual Signal Type:Flashing, Steady; Tones:Continuous; Lens Diameter:100mm RoHS Compliant: Yes RoHS : Compliant |
| 8 | ||
| TLF100P4C | Banner Engineering Corp | SIGNAL TOWER, 4 STACK, 30VDC, CABLE; No. of Stacks / Tiers:4; Module Lens Colour:Blue, Green, Red, Yellow; Supply Voltage VAC:-; Supply Voltage VDC:30V; Visual Signal Type:Flashing, Steady; Tones:Continuous; Lens Diameter:100mm RoHS Compliant: Yes RoHS : Compliant |
| 6 | ||
| TLF100P4ACQP | Banner Engineering Corp | SIGNAL TOWER, 4 STACK, 30VDC, QC; No. of Stacks / Tiers:4; Module Lens Colour:Blue, Green, Red, Yellow; Supply Voltage VAC:-; Supply Voltage VDC:30V; Visual Signal Type:Flashing, Steady; Tones:Continuous; Lens Diameter:100mm RoHS Compliant: Yes RoHS : Compliant |
| 6 | ||
| TLF100PDLGYR | Banner Engineering Corp | SIGNAL TOWER, 3 STACK, 24VDC, CABLE; No. of Stacks / Tiers:3; Module Lens Colour:Green, Red, Yellow; Supply Voltage VAC:-; Supply Voltage VDC:24V; Visual Signal Type:Flashing, Steady; Tones:-; Lens Diameter:100mm RoHS Compliant: Yes RoHS : Compliant |
| 6 | ||
| TLF100P4KCQP | Banner Engineering Corp | SIGNAL TOWER, 4 STACK, 30VDC, QC; No. of Stacks / Tiers:4; Module Lens Colour:Multicolor; Supply Voltage VAC:-; Supply Voltage VDC:30V; Visual Signal Type:Dimming, Flashing; Tones:Continuous; Lens Diameter:100mm RoHS Compliant: Yes RoHS : Compliant |
| 6 | ||
| TLF100P3 | Banner Engineering Corp | SIGNAL TOWER, 3 STACK, 30VDC, CABLE; No. of Stacks / Tiers:3; Module Lens Colour:Green, Red, Yellow; Supply Voltage VAC:-; Supply Voltage VDC:30V; Visual Signal Type:Flashing, Steady; Tones:Continuous; Lens Diameter:100mm RoHS Compliant: Yes RoHS : Compliant |
| 3 | ||
 Analog Devices Inc | AD6674-LF1000EBZ | Analog Devices Inc | Eval Bd for AD6674-1000(up to RoHS : Compliant |
| 18 | |
| AD9234-LF1000EBZ | Analog Devices Inc | AD9234-1000EBZ up to 1GHz inpu RoHS : Compliant |
| 4 | ||
 NXP Semiconductors | MKV30F128VLF10 | NXP Semiconductors | Kinetis KV30: 100MHz Cortex-M4F Real-time Control MCU, 128KB Flash, 16KB SRAM, 48-LQFP, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 1,534 | |
 RS | PM2-LF10B | Panasonic Electronic Components | SENSOR, CONVERGENT, NPN, 5 TO 24VDC, 2.5 TO 8MM, 100 MA |
| 92 | |
| 1014294 (US-EMLF (104X70)) | Phoenix Contact | LABEL CARD |
| 20 | ||
| RLF100-11/14 | ebm-papst | CENTRIFUGAL BLOWER, 24VDC, 127X25MM, FLATPAC, 37.7CFM, 8W, 60DBA, RLF100 SERIES |
| 19 | ||
| 1014291 (US-EMLF (104X140)) | Phoenix Contact | LABEL CARD |
| 12 | ||
| HW4S-2LF10 | IDEC Corporation | SWITCH, HW MTL BZL SS 2POS MAINT LVR 1 RoHS : Compliant |
| 4 | ||
| 17LF100X3/4 | B&B Electronics Manufacturing Company | TIMING PULLEY, 2.03'' PD, 2'' OD, 3/4'' FINISHED BORE, STEEL |
| 3 | ||
| PM2-LF10 | Panasonic Electronic Components | SENSOR, OPTOSWITCH, CONVERGENT, NPN, 5 TO 24VDC, 2.5 TO 8MM, 100 MA, PM2 SERIES RoHS : Compliant |
| 2 | ||
| PM2-LF10B-C1 | Panasonic Electronic Components | SENSOR, PHOTOELECTRIC, CONVERGENT, NPN, DO, 5 TO 24VDC, 2.5 TO 8MM, 100MA |
| 2 | ||
| HW1S-2LF10 | IDEC Corporation | SELECTOR SWITCH, 22MM, 2POSITIONS, LEVER, 1NO, SCREWTERMINAL RoHS : Compliant |
| 1 | ||
| RLF100-11/12 | ebm-papst | CENTRIFUGAL BLOWER, 12VDC, 127X25MM, FLATPAC, 37.7CFM, 8W, 60DBA, RLF100 SERIES RoHS : Compliant |
| 1 | ||
| 0800549 (EMLF (108XE)R) | Phoenix Contact | LABEL;HIGHTLY FLEXIBLE WHITE;PVC;WHITE;4.252" WX0.157" L;108.00MMX4.00MM;BULK |
| 1 | ||
| LF10 | Astrodyne TDI Power Supplies & EMI Filters | HIGH PERFORMANCE LOW LEAKAGE SWITCH MODE EMI FILTER, 10A, LF SERIES |
| 0 | ||
| MLF10C1HS2 (MLF10C1PS2) | IKO International Inc | STAINLESS STEEL MINIATURE LINEAR WAY, C-LUBE MAINTENANCE FREE, STANDARD LENGTH |
| 0 | ||
| LWLF10R60BHS2 (LWLF10R60BPS2) | IKO International Inc | STAINLESS STEEL MINIATURE LINEAR WAY, 60 MM RAIL, HIGH ACCURACY GRADE, WIDE TYP |
| 0 | ||
| LWLF10R160BPS2 (LWLF10R160BHS2) | IKO International Inc | STAINLESS STEEL MINIATURE LINEAR WAY, 160 MM RAIL, PRECISION ACCURACY GRADE, WI |
| 0 | ||
 Bisco Industries | TLF-10C-0625 | KATO Fastening Systems Inc | 819 | |||
| TLF-10C-0625Y | KATO Fastening Systems Inc | 650 | ||||
| TLF-10C-0938 | KATO Fastening Systems Inc | 99 | ||||
| 2525LF10 | MISC. INDUSTRIAL HRD | 50 | ||||
| TLF-10C-0625A | KATO Fastening Systems Inc | 27 | ||||
| 31WLF1032 | MISCELLANEOUS | 11 | ||||
| LF1-0405-04 | MISC. BEARINGS/BUSHINGS | 10 | ||||
| W68LF-10M-4 | Parker Hannifin Corp | 2 | ||||
 Rochester Electronics | BLF10M6LS200U,112 | NXP Semiconductors | BLF10M6LS200, Power LDMOS transistor, SOT502 (LDMOST) RoHS : Compliant |
| 260 | |
| MKV30F128VLF10 | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 128kB (128k x 8) 100MHz 48-QFP Tray RoHS : Compliant |
| 80,000 | ||
| BLF10M6200,112 | NXP Semiconductors | Power LDMOS transistor RoHS : Compliant |
| 1,150 | ||
| BLF1046 | Ampleon | BLF1046 - UHF power LDMOS transistor RoHS : Not Compliant |
| 3,454 | ||
| BLF10H6600PSU | Ampleon | 600W Power LDMOS transistor RoHS : Compliant |
| 16 | ||
| BLF10M6200,112 | Ampleon | Power LDMOS transistor RoHS : Compliant |
| 537 | ||
MKV30F64VLF10 | Freescale Semiconductor | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 64kB (64k x 8) 100MHz 48-QFP Tray RoHS : Compliant |
| 100 | ||
IS61NLF102436B-6.5TQLI | Integrated Silicon Solution Inc | IS61NLF102436B - 36Mb,"No-Wait"/Flowthrough,Sync,1Mb x 36,6.5ns,3.3v I/O,100 Pin TQFP, RoHS : Compliant |
| 288 | ||
| AUXCLF1010ZSTRL | International Rectifier | MOSFET 40V, 60V RoHS : Compliant |
| 800 | ||
| BLF1046 | Rochester Electronics LLC | BLF1046 - UHF power LDMOS transistor RoHS : Not Compliant |
| 79 | ||
 Sager | KSLF-10-4N | ABB Group | BRZ BOLT SUBSTA STUD CONNECTR 90DEG |
| 0 | |
| RLF100-11/12 | ebm-papst | Blowers & Centrifugal Fans Blower, 127x127x25mm, 12VDC, 37.7CFM, 8W, 5100RPM, Ball, Speed Signal, FlatPak RoHS : Compliant |
| 0 | ||
| M25CLF1006E2-SMB | ABB Group | FUSE, MCLF, 25KV, 100A MOD6E2 W/BRK |
| 0 | ||
| M15CLF100-22-WMBQTMA | ABB Group | MOLDED CLF 100A 8.3KV L-N 200A WELL |
| 0 | ||
| M15CLF100-EDC | ABB Group | FUSE, MCLF, 15KV, 100A |
| 0 | ||
| M25CLF100-6E2-CS2100 | ABB Group | 25KV MOLDED CLF (FUSE)W-CS2100 |
| 0 | ||
| KSLF-10-4NNS | ABB Group | BRZ BOLT SUBSTA STUD CONNECTR 90DEG |
| 0 | ||
| HW1S-2LF10-MATRA-BAE | IDEC Corporation | Control Switches MATRA BAE |
| 0 | ||
| RLF100-11/14/2U | ebm-papst | Blowers & Centrifugal Fans DC Radial Blower, 127x127x25mm, 24VDC, FlatPak Series |
| 0 | ||
| KSLF-10-4NNR | ABB Group | BRZ BOLT SUBSTA STUD CNCTR 90DEG TP |
| 0 | ||
| KSLF-10-4NNS-SS | ABB Group | BRZ BOLT SUBSTA STUD CONNECTR 90DEG |
| 0 | ||
| LF1005-S/SP21 | LEM Holdings SSA | Industrial Current Sensors | 0 | |||
| LF1005-S/SP46 | LEM Holdings SSA | Industrial Current Sensors | 0 | |||
| M15CLF100-66-WMBQ | ABB Group | 25KV MOLDED CLF W-WMBQ |
| 0 | ||
| 38WKABR50KLF10 | TT electronics / BI Technologies | Trimmer Resistors - Through Hole 0.15W 50K Ohms 10% SINGLE TURN |
| 0 | ||
 TME | SCW-SC3LF-100R-F | TT Electronics plc | Resistor: thick film; 100Ω; 1225; 3W; ±1%; SC3; -55÷150°C |
| 3,600 | |
| MLF1005VR47JT000 | TDK Corporation | Inductor: ferrite; SMD; 0402; 470nH; 120mA; R: 950mΩ; ±5%; -55÷125°C RoHS : Compliant |
| 1,668 | ||
| FLF-102B | FerroCore | Ferrite: two-piece; on round cable; Ø: 9.5mm; 144Ω; A: 21.5mm |
| 1,528 | ||
| SLF10145T-221MR65-PF | TDK Corporation | Inductor: ferrite; SMD; 220uH; 0.7A; R: 564mΩ; ±20%; SLF RoHS : Compliant |
| 446 | ||
| LF10WBPD-4S(31) | Hirose Electric Co Ltd | Connector: circular; internal bayonet,bayonet,EasyLock; plug RoHS : Compliant |
| 210 | ||
| KQ2LF10-03A | SMSC | Push-in fitting; threaded,angled 90°; -1÷10bar; Thread: Rc 3/8" |
| 3 | ||
| BCH16LF10330F5C2 | Schneider Electric | Motor: servo motor; 1kW; 220VAC; IP65; 0÷40°C; 2500imp/revol; 19mm |
| 0 | ||
| P50LF10SNK-5071 | Shindengen Electronic Manufacturing Co Ltd | Transistor: N-MOSFET; EETMOS3; unipolar; 100V; 50A; Idm: 200A; 217W |
| 0 | ||
| LF10WBR-4P(03) | Hirose Electric Co Ltd | Connector: circular; external bayonet,bayonet; socket; PIN: 4; 10A RoHS : Compliant |
| 0 | ||
| MKV30F128VLF10 | NXP Semiconductors | IC: ARM microcontroller; 16kBSRAM,128kBFLASH; LQFP48; KINETIS RoHS : Compliant |
| 0 | ||
| LF10WBR-C(31) | Hirose Electric Co Ltd | Accessories: protection cover; LF; metal RoHS : Compliant |
| 0 | ||
| LF10WBP-12SC | Hirose Electric Co Ltd | Connector: circular; internal bayonet,bayonet; plug; PIN: 12; 2A RoHS : Compliant |
| 0 | ||
| DLF-103U-1A | FerroCore | Inductor: wire; THT; 10mH; 1A; R: 260mΩ; 250V; Inductor: toroidal |
| 0 | ||
| EB2S 160/3LF 100A 3P | ETI Polam | Power breaker; Poles: 3; screw type; Inom: 100A; 690VAC; IP20; MCCB |
| 0 | ||
IS61LF102418B-7.5TQLI-TR | Integrated Silicon Solution Inc | IC: SRAM memory; 18MbSRAM; 1Mx18bit; 3.3V; 7.5ns; QFP100; parallel RoHS : Compliant |
| 0 | ||
 ComSIT USA | SLF10145T152MR22 | TDK Corporation | General Purpose Inductor, 1500uH, 20%, 1 Element, Ferrite-Core, SMD, 4040 RoHS : Compliant | 7,114 | ||
| SLF10145T220M1R9H | TDK Corporation | WOUND FERRITE INDUCTOR FOR POWER CIRCUIT General Purpose Inductor, 22uH, 20%, 1 Element, Ferrite-Core, SMD, 4040 RoHS : Compliant | 6,500 | |||
| SLF10145T680M1R2 | TDK Corporation | SMD INDUCTOR FOR POWER LINE General Purpose Inductor, 68uH, 20%, 1 Element, Ferrite-Core, SMD, 4040 RoHS : Not Compliant | 5,500 | |||
| CLF10040T220MH | TDK Corporation | General Purpose Inductor, 22uH, 20%, 1 Element, SMD, 3938 RoHS : Compliant | 4,800 | |||
| SFELF10M7GAAC02B0 | Murata Manufacturing Co Ltd | Electronic Component RoHS : Compliant | 4,000 | |||
| RLF10160T470M2R0D | TDK Corporation | IND FIXED Wirewound Ferrite �20% RoHS : Compliant | 2,499 | |||
| CLF10040T470M | TDK Corporation | INDUCTOR FOR POWER CIRCUITS General Purpose Inductor RoHS : Compliant | 2,400 | |||
| SLF10145T100M2R5H | TDK Corporation | WOUND FERRITE INDUCTOR FOR POWER CIRCUIT General Purpose Inductor, 10uH, 20%, 1 Element, Ferrite-Core, SMD, 4040 RoHS : Compliant | 1,500 | |||
| TLWR9600PTC27SELF10 | Vishay Intertechnologies | TELUX LED Single Color LED, Red, Clear Nondiffused, 2.7mm RoHS : Compliant | 1,190 | |||
| RLF10160T470M2R0H | TDK Corporation | IND FIXED Wirewound Ferrite �20% RoHS : Compliant | 1,000 | |||
| SLF10145T220M1R9 | TDK Corporation | SMD INDUCTOR FOR POWER LINE General Purpose Inductor, 22uH, 20%, 1 Element, Ferrite-Core, SMD, 4040 RoHS : Not Compliant | 950 | |||
| VLF10045T101M1R3 | TDK Corporation | SMD INDUCTOR FOR POWER LINE General Purpose Inductor, 100uH, 20%, 1 Element, Ferrite-Core, SMD, 3938 RoHS : Compliant | 785 | |||
| SLF1014ST331MR54H | TDK Corporation | Electronic Component RoHS : Compliant | 475 | |||
| HM6264BLF10LT | Hitachi Ltd | Electronic Component RoHS : Not Compliant | 115 | |||
| BLF1043 | NXP Semiconductors | UHF POWER LDMOS TRANSISTOR RF Power Field-Effect Transistor, 1-Element, Ultra High Frequency Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 1 | |||
 Interstate Connecting Components | ITS4106A18-19SB1ZLF10F | Glenair Inc | 0 | |||
| HVSLF10022A001 | Amphenol PCD | HVSLF10 2 POLE BOX MOUNT RECEP | 0 | |||
| HVSLF10082C102 | Amphenol PCD | HVSLF180 2 POLE RA PLUG WITH H | 0 | |||
| 370DS002LF1006H3 | Glenair Inc | ENVIRO BS DIRECT COUPLING | 0 | |||
| CIR06LF-10SL-3S | ITT Interconnect Solutions | 5015 BAY STRGHT PLUG 3#16 SKT |
| 0 | ||
| 440FJ030LF1003 | Glenair Inc | 0 | ||||
| HVSLF10062B101 | Amphenol PCD | HVSLF180 2 POLE STRAIGHT PLUG | 0 | |||
| HVSLF10082A001 | Amphenol PCD | HVSLF180 2 POLE RA PLUG WITHOU | 0 | |||
| ITS4106A18-12SB1ZLF10F | Glenair Inc | 0 | ||||
| ITS4108A18-19SB1ZLF10F | Glenair Inc | 0 | ||||
| HVSLF10062A101 | Amphenol PCD | HVSLF180 2 POLE STRAIGHT PLUG | 0 | |||
| CIR06LF-10SL-4S | ITT Interconnect Solutions | 5015 BAY STRGHT PLUG 2#16 SKT |
| 0 | ||
| ITS4108R18-12SB1ZLF10F | Glenair Inc | 0 | ||||
| HVSLF10022C101 | Amphenol PCD | HVSLF10 2 POLE BOX MOUNT RECEP | 0 | |||
| ITS41030A18-4PB1ZLF10F | Glenair Inc | 0 | ||||
 NexGen Digital | SLF10145T-101MIR0-HC | TDK Corporation | 4,000 | |||
| SLF10145T-220M1R9-HC | TDK Corporation | 3,500 | ||||
| SLF10145T-471MR47-HC | TDK Corporation | 2,500 | ||||
| SLF10145T-330M1R6-PF | TDK Corporation | RoHS : Compliant | 1,000 | |||
 Powell Electronics | M55302/64LF10Y/46 | AirBorn a molex company | Military Rectangular PCB Connector |
| 254 | |
| M55302/64LF10Y/19 | AirBorn a molex company | Military Rectangular PCB Connector |
| 254 | ||
| M55302/64LF10Y/64 | AirBorn a molex company | Military Rectangular PCB Connector |
| 254 | ||
| M55302/62LF10M | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 254 | ||
| M55302/64LF10Y/27 | AirBorn a molex company | Military Rectangular PCB Connector |
| 254 | ||
| M55302/64LF10Y/15 | AirBorn a molex company | Military Rectangular PCB Connector |
| 254 | ||
| M55302/64LF10Y/60 | AirBorn a molex company | Military Rectangular PCB Connector |
| 254 | ||
| M55302/64LF10Y/35 | AirBorn a molex company | Military Rectangular PCB Connector |
| 254 | ||
| M55302/64LF10Y/4 | AirBorn a molex company | Military Rectangular PCB Connector |
| 254 | ||
| M55302/58LF10Y/12 | AirBorn a molex company | Military Rectangular PCB Connector |
| 20 | ||
| M55302/58LF10Y/49 | AirBorn a molex company | Military Rectangular PCB Connector |
| 20 | ||
| M55302/58LF10Y/30 | AirBorn a molex company | Military Rectangular PCB Connector |
| 20 | ||
| M55302/58LF10Y/18 | AirBorn a molex company | Military Rectangular PCB Connector |
| 20 | ||
| M55302/58LF10Y/63 | AirBorn a molex company | Military Rectangular PCB Connector |
| 20 | ||
| M55302/58LF10Y/38 | AirBorn a molex company | Military Rectangular PCB Connector |
| 20 | ||
 Richardson RFPD | AD9234-LF1000EBZ | Analog Devices Inc | AD9234BCPZ-1000/AD9234BCPZRL7-1000 ADC Evaluation RoHS : Compliant |
| 0 | |
| AD9680-LF1000EBZ | Analog Devices Inc | AD9680-1000 ADC Evaluation Board 1GSPS SPI Control RoHS : Compliant |
| 0 | ||
| AD6674-LF1000EBZ | Analog Devices Inc | AD6674-1000 RF Transceiver Evaluation Board RoHS : Compliant |
| 0 | ||
 Rutronik | P32LF10SL | Shindengen Electronic Manufacturing Co Ltd | N-CH 100V 32A 15,7mOhm LF RoHS : Compliant |
| 100 | |
 Chip 1 Exchange | 278LF-10-24 | Abracon Corporation | INSTOCK | 141,700 | ||
| SLF10145T-680M1R2-PF | TDK Corporation | INSTOCK RoHS : Compliant | 39,321 | |||
| SFELF10M7HA0G-B0 | Murata Manufacturing Co Ltd | INSTOCK RoHS : Compliant | 14,500 | |||
| RLF10160T-220M2R5-D | TDK Corporation | INSTOCK | 11,000 | |||
| SLF10145T-101M1R0-PF | TDK Corporation | INSTOCK RoHS : Compliant | 6,000 | |||
| SLF10145T-100M2R5-PF | INSTOCK | 1,447 | ||||
| SFELF10M7JAXE-B0 | Murata Manufacturing Co Ltd | INSTOCK | 566 | |||
| SLF10145T-471MR47-H | INSTOCK | 150 | ||||
| ELF1010RR-332J-PF | TDK Corporation | INSTOCK RoHS : Compliant | 136 | |||
| SLF10145T-330M1R6-PF | TDK Corporation | INSTOCK RoHS : Compliant | 100 | |||
| SLF1045T-330M1R6 | INSTOCK | 70 | ||||
| SLF10165T-4R4N4R73PF | TDK Corporation | INSTOCK | 12 | |||
| SLF10145T-331MR54-PF | TDK Corporation | INSTOCK RoHS : Compliant | 12 | |||
| CLF10060NIT-6R8N-D | TDK Corporation | INSTOCK RoHS : Compliant | 5 | |||
| SLF10145T-100M2R5-PF | TDK Corporation | INSTOCK RoHS : Compliant | 3 | |||
 Avnet Abacus | MLF1005GR82JTD25 | TDK Corporation | Multilayer Inductor AECQ200 SHLD 082 H 059 ohm 130 MHz 40 mA 0402 1005 Metric (Alt: MLF1005GR82JTD25) RoHS : Compliant | 190,000 | ||
| MLF1005G1R0KT000 | TDK Corporation | (Alt: MLF1005G1R0KT000) RoHS : Compliant | 10,000 | |||
| LF10WBRB-12SD | Hirose Electric Co Ltd | (Alt: CL0136-1016-4-00) RoHS : Compliant | 300 | |||
| LF10WBP-12S(31) | Hirose Electric Co Ltd | (Alt: CL0136-0007-8-31) RoHS : Compliant | 300 | |||
| LF10WBPD-4S | Hirose Electric Co Ltd | (Alt: CL0136-0014-3-00) RoHS : Compliant | 0 | |||
| MLF1005LR82KT | TDK Corporation | Multilayer Inductor 820 nH 590 Milliohm 10 130 MHz 35 mA 0402 1005 Metric (Alt: MLF1005LR82KT) RoHS : Compliant | 0 | |||
| MLF1005VR12JT000 | TDK Corporation | Multilayer Inductor 120 nH 330 Milliohm 5 800 MHz 180 mA 0402 1005 Metric (Alt: MLF1005VR12JT000) RoHS : Compliant | 0 | |||
| CLF10040T-101M-CA | TDK Corporation | Power Inductor SMD 100 uH 20 1 A Shielded 13 A 10mm x 97mm x 38mm (Alt: CLF10040T-101M-CA) RoHS : Compliant | 0 | |||
| CDALF10M7GA040-B0 | Murata Manufacturing Co Ltd | (Alt: CDALF10M7GA040-B0) RoHS : Compliant | 0 | |||
| CLF10060NIT-151M-D | TDK Corporation | Power Inductor SMD 150 uH 20 15 A Shielded 135 A 101mm x 10mm x 6mm (Alt: CLF10060NIT-151M-D) RoHS : Compliant | 0 | |||
| CLF10060NIT-1R0N-D | TDK Corporation | Power Inductor SMD 1 uH 30 105 A Shielded 15 A 101mm x 10mm x 6mm (Alt: CLF10060NIT-1R0N-D) RoHS : Compliant | 0 | |||
| CLF10060NIT-101M-D | TDK Corporation | Power Inductor SMD 100 uH 20 19 A Shielded 165 A 101mm x 10mm x 6mm (Alt: CLF10060NIT-101M-D) RoHS : Compliant | 0 | |||
| CLF10060NIT-471M-D | TDK Corporation | Power Inductor SMD 470 uH 20 900 mA Shielded 750 mA 101mm x 10mm x 6mm (Alt: CLF10060NIT-471M-D) RoHS : Compliant | 0 | |||
| SLF10145T-680M1R2-PF | TDK Corporation | (Alt: SLF10145T-680M1R2-PF) RoHS : Compliant | 0 | |||
| FOX801BELF-100 / 254LF-10-2 | Abracon Corporation | VCTCXO SMD Low Profile 10 MHz 3V Clipped Sine 3075C 114x96x20 (Alt: FOX801BELF-100) RoHS : Compliant | 0 | |||
Avnet Asia | SLF10145T-220M1R9-PF | TDK Corporation | (Alt: SLF10145T-220M1R9-PF) RoHS : Compliant | 0 | ||
| LF1005-N2R4DAAT/LF | Advanced Ceramic X Corporation | (Alt: LF1005-N2R4DAAT/LF) RoHS : Compliant | 0 | |||
| LF1005-NR77NBAT/LF | Advanced Ceramic X Corporation | ADOLF1005-NR77NBAT/LF LOW PASS FILTER,10 (Alt: LF1005-NR77NBAT/LF) RoHS : Compliant | 0 | |||
| LF1005-W2R5NBAT/LF | Advanced Ceramic X Corporation | ADOLF1005-W2R5NBAT/LF LOW PASS FILTER,25 (Alt: LF1005-W2R5NBAT/LF) RoHS : Compliant | 0 | |||
| IS61NLF102418-7.5TQLI | Integrated Silicon Solution Inc | SRAM Chip Sync Dual 3.3V 18M-Bit 1M x 18 7.5ns 100-Pin TQFP (Alt: IS61NLF102418-7.5TQLI) RoHS : Compliant | 0 | |||
| LF1005-W1R9NBAT/LF | Advanced Ceramic X Corporation | ADOLF1005-W1R9NBAT/LF LOW PASS FILTER,10 (Alt: LF1005-W1R9NBAT/LF) RoHS : Compliant | 0 | |||
| MLF1005VR18JT000 | TDK Corporation | (Alt: MLF1005VR18JT000) RoHS : Compliant | 0 | |||
| IS61LF102436B-7.5TQLI | Integrated Silicon Solution Inc | SRAM Chip Sync Quad 3.3V 36M-Bit 1M x 36 7.5ns 100-Pin TQFP (Alt: IS61LF102436B-7.5TQLI) RoHS : Compliant | 0 | |||
| MLF1005GR82JTD25 | TDK Corporation | (Alt: MLF1005GR82JTD25) RoHS : Compliant | 0 | |||
 Avnet Silica | MKV30F128VLF10 | NXP Semiconductors | MCU 32Bit KV30F ARM Cortex M4 RISC 128KB Flash 18V25V33V 48Pin LQFP Brick (Alt: MKV30F128VLF10) RoHS : Compliant | 500 | ||
| MKV30F64VLF10 | NXP Semiconductors | MCU 32Bit KV30F ARM Cortex M4 RISC 64KB Flash 33V 48Pin LQFP Tray (Alt: MKV30F64VLF10) RoHS : Compliant | 0 | |||
| MK02FN128VLF10 | NXP Semiconductors | (Alt: MK02FN128VLF10) RoHS : Compliant | 0 | |||
| MKV30F64VLF10R | NXP Semiconductors | MCU 100MHz ARM CortexM4F Realtime Control 64KB Flash 16KB SRAM 48LQFP (Alt: MKV30F64VLF10R) RoHS : Compliant | 0 | |||
IS61LF102418A-7.5B3 | Integrated Silicon Solution Inc | SRAM Chip Sync Dual 33V 18MBit 1M x 18 75ns 165Pin BGA (Alt: IS61LF102418A-7.5B3) RoHS : Compliant | 0 | |||
| IS61LF102436B-6.5TQL | Integrated Silicon Solution Inc | SRAM Chip Sync Single 33V 36MBit 1M X 36 65ns 100Pin TQFP (Alt: IS61LF102436B-6.5TQL) RoHS : Compliant | 0 | |||
| IS61LF102436B-7.5TQLI | Integrated Silicon Solution Inc | SRAM Chip Sync Quad 33V 36MBit 1M x 36 75ns 100Pin TQFP (Alt: IS61LF102436B-7.5TQLI) RoHS : Compliant | 0 | |||
| IS61LF102418B-7.5TQLI | Integrated Silicon Solution Inc | 18MBFLOWTHROUGHSYNC1M X 1875NS33V IO 100PIN TQFP ROHS (Alt: IS61LF102418B-7.5TQLI) RoHS : Compliant | 0 | |||
| IS64LF102436B-7.5TQLA3 | Integrated Silicon Solution Inc | 36MBFLOWTHROUGHSYNC1024K X 3675NS33V IO 100 PIN TQFP AUTOMOTIVE TEMP (Alt: IS64LF102436B-7.5TQLA3) RoHS : Compliant | 0 | |||
| IS61NLF102418B-7.5TQLI | Integrated Silicon Solution Inc | 18MbNoWaitFlowthroughSync1Mb x 1875ns33v25v IO100 Pin TQFP RoHS (Alt: IS61NLF102418B-7.5TQLI) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | SLF10145T-100M2R5 | TDK Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 752 | |
| SLF10145T-101M1R0-PF | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 321 | ||
| SLF10145T-470M1R4-PF | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 204 | ||
| SLF10145T-100M2R5-PF | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 183 | ||
| SLF10145T-221MR65 | TDK Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 161 | ||
| SLF10145T-681MR38-PF | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 156 | ||
| SLF10145T-220M1R9-PF | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 70 | ||
| LF-101E | IN STOCK SHIP TODAY |
| 7 | |||
| SLF10145T-220M1R9 | TDK Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
| LF10WBR-C1-03 | Hirose Electric Co Ltd | IN STOCK SHIP TODAY |
| 2 | ||
 DB Roberts | LF10A | Essentra Components | TAPERED CAPPLUG WIDE FLGLDPE B | 0 | ||
| LF-10 | Essentra Components | 0 | ||||
 EBV Elektronik | MK02FN64VLF10 | NXP Semiconductors | (Alt: MK02FN64VLF10) RoHS : Compliant | 1,250 | ||
| MK02FN128VLF10 | NXP Semiconductors | (Alt: MK02FN128VLF10) RoHS : Compliant | 1,000 | |||
| MK02FN64VLF10 | NXP Semiconductors | (Alt: MK02FN64VLF10) RoHS : Compliant | 0 | |||
| MKV30F64VLF10 | NXP Semiconductors | MCU 32Bit KV30F ARM Cortex M4 RISC 64KB Flash 33V 48Pin LQFP Tray (Alt: MKV30F64VLF10) RoHS : Compliant | 0 | |||
| MKV30F64VLF10R | NXP Semiconductors | MCU 100MHz ARM CortexM4F Realtime Control 64KB Flash 16KB SRAM 48LQFP (Alt: MKV30F64VLF10R) RoHS : Compliant | 0 | |||
| MKV30F128VLF10 | NXP Semiconductors | MCU 32Bit KV30F ARM Cortex M4 RISC 128KB Flash 18V25V33V 48Pin LQFP Brick (Alt: MKV30F128VLF10) RoHS : Compliant | 0 | |||
 FDH Electronics | LF-109B109-03M | ELECTRO ENTERPRISES INC | Data Bus |
| 282 | |
| LF-109B109-010M | ELECTRO ENTERPRISES INC | Data Bus | 282 | |||
| LF-109B109-005M | ELECTRO ENTERPRISES INC | Data Bus | 282 | |||
| LF-109B109-015M | ELECTRO ENTERPRISES INC | Data Bus | 282 | |||
| LF10WBP-12S(31) | Hirose Electric Co Ltd | Circular Conn RoHS : Compliant | 15 | |||
| LF-104B106-046M | ELECTRO ENTERPRISES INC | Cable Assembly |
| 5 | ||
| LF-103D103-8M | ELECTRO ENTERPRISES INC | Data Bus |
| 3 | ||
| LF-104B104-10M | ELECTRO ENTERPRISES INC | Data Bus |
| 2 | ||
| LF-104B104-1M | ELECTRO ENTERPRISES INC | Data Bus |
| 2 | ||
| LF-104B104-2M | ELECTRO ENTERPRISES INC | Data Bus |
| 2 | ||
| LF-104B104-7M | ELECTRO ENTERPRISES INC | Data Bus |
| 2 | ||
| 310AS001LF10D | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 310AS001LF10T | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 620LS048LF10 | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 311AS001LF1003 | Glenair Inc | Connector | 0 | |||
 Flip Electronics | MK02FN64VLF10 | NXP Semiconductors | Stock RoHS : Compliant | 11,250 | ||
| MKV30F64VLF10R | NXP Semiconductors | Stock RoHS : Compliant | 10,880 | |||
| MKV30F128VLF10 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 387 | ||
| BLF10M6135U | Flip Electronics Manufacturing Services | Stock, Ship Today | 180 | |||
| BLF10M6200U | Flip Electronics Manufacturing Services | Stock, Ship Today | 121 | |||
| BLF10H6600PU | Flip Electronics Manufacturing Services | Stock, Ship Today | 63 | |||
 Maritex | SLF10145T-470M1R4-PF | TDK Corporation | SMD Inductors; SLF10145T-470M1R4-PF; TDK; 47 �H; 1 kHz; 120 m?; 10.1 mm RoHS : Compliant |
| 13,358 | |
| SLF10145T-330M1R6-PF | TDK Corporation | SMD Inductors; SLF10145T-330M1R6-PF; TDK; 1.7 A; 33 �H; 1 kHz; 97.8 m? RoHS : Compliant |
| 4,205 | ||
| SLF10145T-330M1R6-H | TDK Corporation | SMD Inductors; SLF10145T-330M1R6-H; TDK; 33 �H; 1 kHz; 97.8 m?; 10.1 mm RoHS : Compliant |
| 1,215 | ||
| CLF10060NIT-150M-D | TDK Corporation | SMD Inductors; CLF10060NIT-150M-D; TDK; 15 �H; 100 kHz; 36 m?; 10 mm RoHS : Compliant |
| 1,099 | ||
CLF10040T-220M-D | TDK Corporation | SMD Inductors; CLF10040T-220M-D; TDK; 2.7 A; 22 �H; 100 kHz; 66 m? RoHS : Compliant |
| 815 | ||
| SLF10145T-471MR47-PF | TDK Corporation | SMD Inductors; SLF10145T-471MR47-PF; TDK; 470 �H; 1 kHz; 1.236 ?; 10.1 mm RoHS : Compliant |
| 768 | ||
| 3006P-104-LF 100K OHM | Allconnect | Multi turn potentiometer; 100K |
| 346 | ||
| 3006P-101-LF 100 OHM | Allconnect | Multi turn potentiometer; 100R |
| 100 | ||
| 3006P-103-LF 10K OHM | Allconnect | Multi turn potentiometer; 10K |
| 100 | ||
| LF10WBP-12S(31) | Hirose Electric Co Ltd | Circular Connectors; LF10WBP-12S(31); HIROSE ELECTRIC; 12; Plug RoHS : Compliant |
| 73 | ||
| MLF1005G2R2KT000 | TDK Corporation | SMD Inductors; MLF1005G2R2KT000; TDK; 2.2 �H; 10 MHz; 1.3 ?; 500 �m RoHS : Compliant |
| 9 | ||
| LF10WBJ-4P | Hirose Electric Co Ltd | Circular Connectors; LF10WBJ-4P; HIROSE ELECTRIC; 4; Cable, Free Hanging; 4; Circular RoHS : Compliant |
| 5 | ||
 Master Electronics | RLF100-11/14 | ebm-papst | DC Blower Centrifugal Ball Bearing 24V 16V to 30V 37.7CFM 60dB RoHS : Compliant |
| 131 | |
| RLF100-11/18/2HP-182 | ebm-papst | Fan Blower - Centrifugal - 48VDC - 127mm x 127mm x 25mm - 47 CFM - 6400 RPM. RoHS : Compliant |
| 110 | ||
| RLF100-11/12 | ebm-papst | DC Blower Centrifugal Ball Bearing 12V 8V to 15V 37.7CFM 60dB RoHS : Compliant |
| 5 | ||
| EMLF-(108XE)R-RD | Phoenix Contact | Label - highly flexible - Roll - red - unlabeled - can be labeled with: THERMOMARK ROLLMASTER 300/600 - THERMOMARK X1.2 - THERMOMARK ROLL X1 - THERMOMARK ROLL 2.0 - THERMOMARK ROLL - mounting type: adhesive - lettering field size: 108 x 48000 mm - Number of individual labels: 1 RoHS : Compliant |
| 0 | ||
| HW1S-2LF10-MATRA-BAE | IDEC Corporation | MATRA BAE RoHS : Compliant |
| 0 | ||
| US-EMLF-(104X70)-YE | Phoenix Contact | Plastic label - Card - yellow - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - THERMOMARK PRIME - THERMOMARK CARD 2.0 - THERMOMARK CARD - mounting type: adhesive - lettering field size: 104 x 70 mm - Number of individual labels: 2 RoHS : Compliant |
| 0 | ||
| CIR06LF-10SL-3S | ITT Interconnect Solutions | Circular Connector - Straight Plug - Female Sockets - 3 Position - Shell Size-Insert 10SL-3 - Bayonet Lock - Solder Cup Termination. RoHS : Not Compliant |
| 0 | ||
| US-EMLF-(104X140)-BU | Phoenix Contact | Plastic label - Card - blue - unlabeled - can be labeled with: BLUEMARK ID COLOR - BLUEMARK ID - THERMOMARK PRIME - THERMOMARK CARD 2.0 - THERMOMARK CARD - mounting type: adhesive - lettering field size: 104 x 140 mm - Number of individual labels: 1 RoHS : Compliant |
| 0 | ||
| CIR06LF-10SL-4S | ITT Interconnect Solutions | Circular Connector - Straight Plug - Female Sockets - 2 Position - Shell Size-Insert 10SL-4 - Bayonet Lock - Solder Cup Termination. RoHS : Not Compliant |
| 0 | ||
| PM2-LF10-C1 | Panasonic Electronic Components | Photoelectric Sensor Convergent-Reflective Light ON NPN Open Collector 0.008m 3-Pin RoHS : Compliant |
| 0 | ||
| HW4S-21LF10 | IDEC Corporation | SELECTOR SWITCH RoHS : Compliant |
| 0 | ||
| ICB30LF10NO | Carlo Gavazzi Holding AG | ProXimity Sensor Cylindrical NPN NO M30 | Carlo Gavazzi Inc. ICB30LF10NO RoHS : Compliant |
| 0 | ||
| EMLF-(108XE)R-YE | Phoenix Contact | Label - highly flexible - Roll - yellow - unlabeled - can be labeled with: THERMOMARK ROLLMASTER 300/600 - THERMOMARK X1.2 - THERMOMARK ROLL X1 - THERMOMARK ROLL 2.0 - THERMOMARK ROLL - mounting type: adhesive - lettering field size: 108 x 48000 mm - Number of individual labels: 1 RoHS : Compliant |
| 0 | ||
| HW1S-2LF10 | IDEC Corporation | Switch Selector N.O. SPST 90° Lever 10A 440VAC 220VDC 745.7VA Screw 500000Cycles Panel Mount RoHS : Compliant |
| 0 | ||
| SL-F1000 | Panasonic Electronic Components | RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C2679LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to MCX Plug Right Angle Cable 100 CM Length Using PE-SR405FLJ Coax, LF Solder., Radio frequency assembly SMA male to MCX plug right angle cable 100 cm length using PE-SR405FLJ coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to MCX plug right angle cable 100 cm length using PE-SR405FLJ coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle MCX cable connection on the other. Our SMA to right angle MCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MCX cable is a male to plug coax assembly, PE3C2679LF-100CM, can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MCX male cable assembly PE3C2679LF-100CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2679LF-100CM can also be used in the other direction and will be right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MCX plug right angle cable 100 cm length using PE-SR405FLJ coax, LF solder. |
| 144 | |
| PE37927LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to MMCX Plug Right Angle Cable 100 CM Length Using PE-047SR Coax, LF Solder., Radio frequency assembly SMA male to MMCX plug right angle cable 100 cm length using PE-047SR coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to MMCX plug right angle cable 100 cm length using PE-047SR coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle MMCX cable connection on the other. Our SMA to right angle MMCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MMCX cable is a male to plug coax assembly, PE37927LF-100CM, can also be known as a SMA plug to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MMCX male cable assembly PE37927LF-100CM is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37927LF-100CM can also be used in the other direction and will be right angle MMCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MMCX plug right angle cable 100 cm length using PE-047SR coax, LF solder. |
| 3 | ||
| PE3483LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 39.3 inches. SMA Male to SMA Male Right Angle Cable 100 cm Length Using PE-SR402FL Coax, RoHS., Radio frequency assembly SMA male to SMA male right angle cable 100 cm length using PE-SR402FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 100 cm length using PE-SR402FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3483LF-100CM, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3483LF-100CM is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3483LF-100CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 100 cm length using PE-SR402FL coax, RoHS. |
| 2 | ||
| PE3062LF-108 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 108 inches. N Male to N Male Cable 108 Inch Length Using RG214 Coax, RoHS., Radio frequency assembly N male to N male cable 108 inch length using RG214 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 108 inch length using RG214 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3062LF-108, can also be known as a type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3062LF-108 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency N type male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 108 inch length using RG214 coax, RoHS. RoHS : Compliant |
| 0 | ||
| PE33581LF-108 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 108 inches. HN Male to HN Male Right Angle Cable 108 Inch Length Using RG214 Coax, LF Solder., Radio frequency assembly HN male to HN male right angle cable 108 inch length using RG214 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male right angle cable 108 inch length using RG214 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and right angle HN cable connection on the other. Our HN to right angle HN cable assembly has male gender on end 1 and male on end 2. PE33581LF-108 can also be known as a HN plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE (LD) dielectric type. HN plug to HN plug cable assembly PE33581LF-108 is built with RG214 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to right angle HN cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE33581LF-108 RF cable are available on our downloadable PDF datasheet.PE33581LF-108 can also be used in the other direction and will be right angle HN male to HN male cable assembly if the opposite connectivity is required. HN plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2626LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. TNC Male to MMCX Plug Low Loss Cable 100 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly TNC male to MMCX plug low loss cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to MMCX plug low loss cable 100 cm length using LMR-100 coax, LF solder, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to MMCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and MMCX cable connection on the other. Our low loss TNC to MMCX cable assemblies have a male gender on end 1 and plug on end 2. PE3C2626LF-100CM can also be known as a low loss TNC plug to MMCX male cable assembly and will be shipped same-day as it is purchased. TNC plug to MMCX male cable assembly PE3C2626LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC male to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2626LF-100CM can also be used in the other direction and will be MMCX plug to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to MMCX cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to MMCX plug low loss cable 100 cm length using LMR-100 coax, LF solder. |
| 0 | ||
| PE3C3408LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SSMB Plug to BNC Male Cable 100 CM Length Using RG316 Coax, LF Solder., Radio frequency assembly SSMB plug to BNC male cable 100 cm length using RG316 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMB plug to BNC male cable 100 cm length using RG316 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMB to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMB cable connection on one end and BNC cable connection on the other. Our SSMB to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SSMB to BNC cable is a plug to male coax assembly, PE3C3408LF-100CM, can also be known as a SSMB male to BNC plug cable assembly and will be shipped same-day as it is purchased. SSMB male to BNC plug cable assembly PE3C3408LF-100CM is built with RG316 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMB plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3408LF-100CM can also be used in the other direction and will be BNC male to SSMB plug cable assembly if the opposite connectivity is required. SSMB male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMB to BNC cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMB plug to BNC male cable 100 cm length using RG316 coax, LF solder. |
| 0 | ||
| PE34728LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Reverse Polarity SMA Female Bulkhead to MMCX Plug Right Angle Cable 100 cm Length Using RG316 Coax, LF Solder., Radio frequency assembly reverse polarity SMA female bulkhead to MMCX plug right angle cable 100 cm length using RG316 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA female bulkhead to MMCX plug right angle cable 100 cm length using RG316 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA bulkhead cable connection on one end and right angle MMCX cable connection on the other. Our reverse polarity SMA to right angle MMCX cable assemblies have a female gender on end 1 and plug on end 2. This reverse polarity SMA to MMCX cable is a female to plug coax assembly, PE34728LF-100CM, can also be known as a reverse polarity SMA jack to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to MMCX male cable assembly PE34728LF-100CM is built with RG316 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency reverse polarity SMA female bulkhead to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34728LF-100CM can also be used in the other direction and will be right angle MMCX plug to reverse polarity SMA female bulkhead cable assembly if the opposite connectivity is required. SMA reverse polarity jack bulkhead to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female bulkhead to MMCX plug right angle cable 100 cm length using RG316 coax, LF solder. |
| 0 | ||
| PE3W07667LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Black FAKRA Plug to SMA Male Low Loss Cable 100 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly black FAKRA plug to SMA male low loss cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The black FAKRA plug to SMA male low loss cable 100 cm length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a FAKRA cable connection on one end and a SMA cable connection on the other. Our low loss a FAKRA to a SMA cable assembly has plug gender on end 1 and male on end 2. PE3W07667LF-100CM can also be known as a low loss FAKRA male to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07667LF-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. FAKRA male to SMA plug cable assembly PE3W07667LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W07667LF-100CM can also be used in the other direction and will be SMA male to FAKRA plug cable assembly if the opposite connectivity is required. Low loss FAKRA male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W08152LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Water Blue FAKRA Jack Right Angle to SMA Male Cable 100 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly water blue FAKRA jack right angle to SMA male cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Water blue FAKRA jack right angle to SMA male cable 100 cm length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle FAKRA cable connection on one end and SMA cable connection on the other. Our right angle FAKRA to SMA cable assemblies have a jack gender on end 1 and male on end 2. This FAKRA to SMA cable is a jack to male coax assembly, PE3W08152LF-100CM, can also be known as a right angle FAKRA female to SMA plug cable assembly and will be shipped same-day as it is purchased. FAKRA female to SMA plug cable assembly PE3W08152LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency FAKRA right angle jack to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08152LF-100CM can also be used in the other direction and will be SMA male to right angle FAKRA jack cable assembly if the opposite connectivity is required. FAKRA right angle female to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack right angle to SMA male cable 100 cm length using LMR-100 coax, LF solder. |
| 0 | ||
| PE3C1689LF-108 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length, Max: 108 inches. N Male to N Male Cable 108 Inch Length Using RG214 Coax, LF Solder., Radio frequency assembly N male to N male cable 108 inch length using RG214 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male cable 108 inch length using RG214 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our type N to type N cable assembly has male gender on end 1 and male on end 2. PE3C1689LF-108 can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.600 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. N type plug to type N plug cable assembly PE3C1689LF-108 is built with RG214 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C1689LF-108 RF cable are available on our downloadable PDF datasheet. Type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02707LF-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Female Bulkhead to SMA Male Low Loss Cable 100 cm Length Using LMR-400 Coax, LF Solder., Radio frequency assembly N female bulkhead to SMA male low loss cable 100 cm length using LMR-400 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to SMA male low loss cable 100 cm length using LMR-400 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a female gender on end 1 and male on end 2. This type N to SMA cable is a female to male coax assembly, PE3W02707LF-100CM, can also be known as a low loss type N jack to SMA plug cable assembly and will be shipped same-day as it is purchased. N type jack to SMA plug cable assembly PE3W02707LF-100CM is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02707LF-100CM can also be used in the other direction and will be SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss N type jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male low loss cable 100 cm length using LMR-400 coax, LF solder. |
| 0 | ||
| PE3W02909LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMB Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax, LF Solder., Radio frequency assembly SMA male to SMB plug right angle low loss cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMB plug right angle low loss cable 100 cm length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle SMB cable connection on the other. Our low loss SMA to right angle SMB cable assembly has a male gender on end 1 and a plug on end 2. PE3W02909LF-100CM can also be known as a low loss SMA plug to right angle SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02909LF-100CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to right angle SMB plug cable has a maximum VSWR of 1.4:1. SMA plug to SMB male cable assembly PE3W02909LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02909LF-100CM can also be used in the other direction and will be a right angle SMB plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMB right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0436LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. N Male to N Male Low Loss Cable 100 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly N male to N male low loss cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 100 cm length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0436LF-100CM can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C0436LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 100 cm length using LMR-100 coax, LF solder. |
| 0 | ||
| PE3W02685LF-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMA Male Low Loss Cable 100 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 100 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 100 cm length using LMR-100 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W02685LF-100CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W02685LF-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 100 cm length using LMR-100 coax, LF solder. |
| 0 | ||
 Vyrian | RLF100-11/18/2HP-182 | Ebm-papst Mulfingen & Kg | DC Fan, Centrifugal Construction, 48V, 17W | 17,672 | ||
| LF10WBP-12S(03) | Hirose Electric | Circular Connector | 16,921 | |||
| RLF100-11/14 | Ebm-papst Mulfingen & Kg | DC Fan, Centrifugal Construction, 0.34A, 24V, 8W | 14,744 | |||
| LF10WBJ-4S | Hirose Electric | Circular Connector, 4 Contact(s), Zinc Alloy, Female, Crimp Terminal, Jack | 13,228 | |||
| RLF100-11/12 | Ebm-papst Mulfingen & Kg | DC Fan, Centrifugal Construction, 0.67A, 12V, 8W | 12,640 | |||
| MKV30F128VLF10P | NXP Semiconductors | RISC Microcontroller, 32-Bit, 100MHz, CMOS RoHS : Compliant | 12,464 | |||
| LF10WBP-12S(33) | Hirose Electric | Circular Connector | 11,836 | |||
| SLF10145T-470M1R4-PF | TDK Corporation | General Purpose Inductor, 47uH, 20%, 1 Element, Ferrite-Core, SMD, 4040 RoHS : Compliant | 10,730 | |||
| HMC6814LF10 | Analog Devices Inc | 9,753 | ||||
| AD9680-LF1000EBZ | Analog Devices Inc | RoHS : Compliant | 9,359 | |||
| LF10WBP-4S(31) | Hirose Electric | Circular Connector | 8,586 | |||
| AD9234-LF1000EBZ | Analog Devices Inc | RoHS : Compliant | 7,685 | |||
| TMDSCCS-ALLF10 | Texas Instruments | 5,218 | ||||
| TMDSCCSSUB12ALLF10 | Texas Instruments | 4,873 | ||||
| SMA7022MU-LF1054 | Allegro MicroSystems | Interface Circuit | 478 | |||
 Win Source Electronics | VLF10045T-4R7N6R1 | TDK Corporation | SMD Inductors(Coils) For Power Line(Wound, Magnetic Shielded) | FIXED IND 4.7UH 6.1A 15 MOHM SMD RoHS : Compliant |
| 80,000 | |
| SLF10165T-100M3R8-3PF | TDK Corporation | FIXED IND 10UH 3.8A 22.2 MOHM / Inductor Power Shielded Wirewound 10uH 20% 100KHz Ferrite 3.8A 0.0222Ohm DCR T/R |
| 47,823 | ||
| SLF10145T-101M1R0-PF | TDK Corporation | Inductor Power Shielded Wirewound 100uH 20% 1KHz Ferrite 1.1A 0.24Ohm DCR T/R / FIXED IND 100UH 1.1A 240 MOHM RoHS : Compliant |
| 36,000 | ||
| SLF10145T-151MR79-PF | TDK Corporation | FIXED IND 150UH 810MA 420 MOHM RoHS : Compliant |
| 31,767 | ||
| SLF10145T-470M1R4-PF | TDK Corporation | Inductor Power Shielded Wirewound 47uH 20% 1KHz Ferrite 1.5A 0.12Ohm DCR T/R / FIXED IND 47UH 1.5A 120 MOHM SMD RoHS : Compliant |
| 24,992 | ||
| SLF10145T-471MR47-PF | TDK Corporation | FIXED IND 470UH 470MA 1.236 OHM RoHS : Compliant |
| 15,677 | ||
| SLF10145T-220M1R9-PF | TDK Corporation | Inductor Power Shielded Wirewound 22uH 20% 1KHz Ferrite 1.9A 0.0709Ohm DCR T/R / FIXED IND 22UH 1.9A 70.9 MOHM RoHS : Compliant |
| 13,473 | ||
| SLF10145T-150M2R2-PF | TDK Corporation | FIXED IND 15UH 2.2A 56.6 MOHM RoHS : Compliant |
| 13,160 | ||
| SLF10145T-100M2R5-PF | TDK Corporation | FIXED IND 10UH 2.5A 43.7 MOHM RoHS : Compliant |
| 12,992 | ||
| SLF10145T-680M1R2-PF | TDK Corporation | FIXED IND 68UH 1.3A 168 MOHM SMD RoHS : Compliant |
| 9,010 | ||
| CLF10060NIT-2R2N-D | TDK Corporation | FIXED IND 2.2UH 8.5A 9.23MOHM SM RoHS : Compliant |
| 7,220 | ||
| SLF10145T-470M1R4-H | TDK Corporation | FIXED IND 47UH 1.5A 100 MOHM SMD RoHS : Compliant |
| 5,500 | ||
| CLF10040T-470M | TDK Corporation | FIXED IND 47UH 1.3A 150 MOHM SMD RoHS : Compliant |
| 4,800 | ||
| MK02FN128VLF10 | Nexperia | IC MCU 32BIT 128KB FLASH 48LQFP |
| 1,250 | ||
| LF 1005-S/SP16 | LEM Holdings SSA | LF 1005-S/SP16 / Current Sensor Channel |
| 360 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand