 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
L2012-R56 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Ameya Holding Limited | CBL2012T2R2M | TAIYO YUDEN | RoHS : Compliant | 4,000 | ||
| BRL2012T4R7M | TAIYO YUDEN | RoHS : Compliant | 3,000 | |||
| BRL2012T2R2M | TAIYO YUDEN | RoHS : Compliant | 3,000 | |||
| BRL2012T100M | TAIYO YUDEN | RoHS : Compliant | 3,000 | |||
 ComSIT USA | WSL20106L000FEA | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 5,809 | ||
| WSL2010R0300FEA18 | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 15,312 | |||
 Rutronik | WSL2010R0100FEA18 | Vishay Intertechnologies | LO2010 0,01R 1% 1W TK75 HIGHPOWER RoHS : Compliant |
| 4,000 | |
| 409-3-100L2-010-550808-BS-0055 | MPE-Garry GmbH | FFC-Cable 10P pitch=1.00mm L=055mm RoHS : Compliant |
| 3 | ||
 Chip-Germany GmbH | BL2012S34055 | EOI Techne srl | 125 | |||
| PSA25L-201 | Phihong USA | 1 | ||||
 DB Roberts | TL-20-102-07 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. |
| 6,628 | |
| TL-20-102-52 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. RoHS : Compliant |
| 1,387 | ||
| TL-20-101-07 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. |
| 31 | ||
| TL-20-101-52 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. |
| 3 | ||
| TL-20-105-07 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. | 0 | |||
| TL-20-105-52 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. | 0 | |||
| TL-20-104-07 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. | 0 | |||
| TL-20-104-52 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. | 0 | |||
| TL-20-103-07 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. | 0 | |||
| TL-20-103-52 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. | 0 | |||
| TL-20-106-07 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. | 0 | |||
| TL-20-106-52 | Southco | Southcos Over-Center Series Latches provide a mechanical advantage through lever actuated over-center action that pulls panels together and holds them secure. | 0 | |||
 Flip Electronics | ESDL2011PFCT5G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,030,000 | |
| ESDL2012MX4T5G | onsemi | Stock, Ship Today RoHS : Compliant |
| 26,458 | ||
| SESDL2012MX4T5G-ENG | onsemi | Stock, Ship Today | 10,000 | |||
| SESDL2012AMX4T5G-ENG | onsemi | Stock, Ship Today | 10,000 | |||
| NLGTL2014DTR2G | onsemi | Stock, Ship Today RoHS : Compliant | 7,500 | |||
 Maritex | FL201209-R68K LFR | Prosperity Dielectrics Co Ltd | Inductor; SMD; 0.68uH; 0.15A; 0.80R; 0805; 10% |
| 12,365 | |
| FL201209-R15K LFR | Prosperity Dielectrics Co Ltd | Inductor; SMD; 0.15uH; 0.25A; 0.4R; 0805; 10% |
| 12,222 | ||
| MPL2012S1R0MHT | Sunlord | Inductor; SMD; 1uH; 1A; 0.11R; 0805; 20% RoHS : Compliant |
| 3,254 | ||
| RI2512L201JT | Guangdong Hottech Industrrial Co | Chip Resistor; SMD; 2512; 200Ohm; 5%; 1W |
| 2,936 | ||
PI4GTL2014LEX | Diodes Incorporated | Level Translators; PI4GTL2014LEX; DIODES; 2.3 V; 3.6 V RoHS : Compliant |
| 1,884 | ||
| GTL2014PWZ | NXP Semiconductors | Level Translators; GTL2014PWZ; NXP SEMICONDUCTORS RoHS : Compliant |
| 735 | ||
| FL201209-R10K LFR | Prosperity Dielectrics Co Ltd | Inductor; SMD; 0.10uH; 0.25A; 0.3R; 0805; 10% |
| 252 | ||
RL2010FK-070R25L.jpg) | YAGEO Corporation | Chip Resistor; SMD; 2010; 0R25; 1%; 3/4W RoHS : Compliant |
| 248 | ||
| RL2010FK-070R2L | YAGEO Corporation | Chip Resistor; SMD; 2010; 0R2; 1%; 3/4W RoHS : Compliant |
| 248 | ||
| RNP-SDWL2012C12NJSTF | RDA Microelectronics | Coil SMD; 0805; 12nH; 5% |
| 100 | ||
| RNP-SDWL2012CR10JSTF | RDA Microelectronics | Coil SMD; 0805; 100nH; 5% |
| 100 | ||
| RNP-SDWL2012CR12JSTF | RDA Microelectronics | Coil SMD; 0805; 120nH; 5% |
| 100 | ||
| FL201209-1R5K LFR | Prosperity Dielectrics Co Ltd | Inductor; SMD; 1.5uH; 0.05A; 0.50R; 0805; 10% |
| 2 | ||
 Pasternack Enterprises US | PE80L2011 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 18 GHz, Maximum Insertion Loss: 2.1 dB, Design Type: High Power, Peak Power: 20 Watt, Leakage (CW): 21.5 dBm. High Power Limiter, SMA, 20W Peak Power, 19 dBm Flat Leakage, 1 GHz to 18 GHz. The PE80L2011 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA male to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 20 watts. Our PE80L2011 is a high power coaxial RF power limiter with a maximum insertion loss of 2.1 dB. Pasternack SMA to SMA limiter has a minimum frequency of 1 GHz and a maximum frequency of 18 GHz. This high-quality radio frequency limiter is constructed of aluminum and has a maximum leakage power of 21.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. Our 20 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.5:1 and whereas the typical output VSWR is 1.8:1. Our PE80L2011 limiter supports a maximum average input power of 6 W. This high power limiter is 0.71 inches long, 0.59 inches wide, and 0.37 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | |
| PE80L2018 | Pasternack Enterprises | Key Specifications, Connector In Series: 2.92mm, Connector In Gender: Female, Connector Out Series: 2.92mm, Connector Out Gender: Female, Minimum Frequency: 29 GHz, Maximum Frequency: 39 GHz, Maximum Insertion Loss: 2.5 dB, Design Type: High Power, Peak Power: 10 Watt, Leakage (CW): 20.5 dBm. High Power Limiter, 2.92mm, 10W Peak Power, 20 dBm Flat Leakage, 29 GHz to 39 GHz. The PE80L2018 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a 2.92mm female to 2.92mm female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 10 watts. Our PE80L2018 is a high power coaxial RF power limiter with a maximum insertion loss of 2.5 dB. Pasternack 2.92mm to 2.92mm limiter has a minimum frequency of 29 GHz and a maximum frequency of 39 GHz. This high-quality radio frequency limiter is constructed from aluminum and features a typical leakage power of 20 dBm and a maximum leakage power of 20.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 2 dB. Our 10 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.8:1 and whereas the typical output VSWR is 2:1. This high power limiter is 0.79 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power 2.92mm limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2012 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 50 MHz, Maximum Frequency: 21 GHz, Design Type: High Power, Peak Power: 10 Watt, Leakage (CW): 20.5 dBm. High Power Limiter, SMA, 10W Peak Power, 18 dBm Flat Leakage, 50 MHz to 21 GHz. The PE80L2012 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 10 watts. Pasternack SMA to SMA limiter has a minimum frequency of 50 MHz and a maximum frequency of 21 GHz. This high-quality radio frequency limiter is constructed from aluminum and features a typical leakage power of 18 dBm and a maximum leakage power of 20.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. Our 10 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.6:1 and whereas the typical output VSWR is 1.8:1. Our PE80L2012 limiter supports a maximum average input power of 4 W. This high power limiter is 0.79 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2017 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 4 GHz, Maximum Insertion Loss: 1.1 dB, Design Type: High Power, Peak Power: 100 Watt, Leakage (CW): 18 dBm. High Power Limiter, SMA, 100W Peak Power, 18 dBm Flat Leakage, 2 GHz to 4 GHz. The PE80L2017 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 100 watts. Our PE80L2017 is a high power coaxial RF power limiter with a maximum insertion loss of 1.1 dB. Pasternack SMA to SMA limiter has a minimum frequency of 2 GHz and a maximum frequency of 4 GHz. This high-quality radio frequency limiter is constructed of copper and has a maximum leakage power of 18 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 0.9 dB. Our 100 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.4:1 and whereas the typical output VSWR is 1.5:1. This high power limiter is 1.26 inches long, 0.71 inches wide, and 0.55 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2019 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 7.5 GHz, Maximum Frequency: 12.5 GHz, Maximum Insertion Loss: 1 dB, Design Type: High Power, Peak Power: 50 Watt. High Power Limiter, SMA, 50W Peak Power, 18 dBm Flat Leakage, 7.5 GHz to 12.5 GHz. The PE80L2019 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 50 watts. Our PE80L2019 is a high power coaxial RF power limiter with a maximum insertion loss of 1 dB. Pasternack SMA to SMA limiter has a minimum frequency of 7.5 GHz and a maximum frequency of 12.5 GHz. This high-quality radio frequency limiter is constructed of aluminum and has a typical leakage power of 18 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 0.75 dB. Our 50 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.3:1 and whereas the typical output VSWR is 1.5:1. Our PE80L2019 limiter supports a maximum average input power of 10 W. This high power limiter is 0.79 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2014 | Pasternack Enterprises | Key Specifications, Connector In Series: 2.92mm, Connector In Gender: Female, Connector Out Series: 2.92mm, Connector Out Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 26 GHz, Maximum Insertion Loss: 2.1 dB, Design Type: High Power, Peak Power: 10 Watt, Leakage (CW): 18 dBm. High Power Limiter, 2.92mm, 10W Peak Power, 18 dBm Flat Leakage, 2 GHz to 26 GHz. The PE80L2014 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a 2.92mm female to 2.92mm female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 10 watts. Our PE80L2014 is a high power coaxial RF power limiter with a maximum insertion loss of 2.1 dB. Pasternack 2.92mm to 2.92mm limiter has a minimum frequency of 2 GHz and a maximum frequency of 26 GHz. This high-quality radio frequency limiter is constructed of aluminum and has a maximum leakage power of 18 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 1.8 dB. Our 10 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.6:1 and whereas the typical output VSWR is 2.1:1. Our PE80L2014 limiter supports a maximum average input power of 5 W. This high power limiter is 0.79 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power 2.92mm limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2015 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 2 GHz, Maximum Insertion Loss: 0.5 dB, Design Type: High Power, Peak Power: 20 Watt, Leakage (CW): 21.5 dBm. High Power Limiter, SMA, 20W Peak Power, 19 dBm Flat Leakage, 1 GHz to 2 GHz. The PE80L2015 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 20 watts. Our PE80L2015 is a high power coaxial RF power limiter with a maximum insertion loss of 0.5 dB. Pasternack SMA to SMA limiter has a minimum frequency of 1 GHz and a maximum frequency of 2 GHz. This high-quality radio frequency limiter is constructed from aluminum and features a typical leakage power of 19 dBm and a maximum leakage power of 21.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 0.35 dB. Our 20 Watt limiter operates in temperatures ranging from -45 to 85 degrees C. Typical input VSWR for this limiter is 1.2:1 and whereas the typical output VSWR is 1.3:1. Our PE80L2015 limiter supports a maximum average input power of 6 W. This high power limiter is 0.51 inches long, 0.39 inches wide, and 0.31 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2013 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 18 GHz, Maximum Insertion Loss: 4 dB, Design Type: High Power, Leakage (CW): -15 dBm. High Power Limiter, SMA, 1W CW Power, -20 dBm Flat Leakage, 1 GHz to 18 GHz. The PE80L2013 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. Our PE80L2013 is a high power coaxial RF power limiter with a maximum insertion loss of 4 dB. Pasternack SMA to SMA limiter has a minimum frequency of 1 GHz and a maximum frequency of 18 GHz. This high-quality radio frequency limiter is constructed from aluminum and features a typical leakage power of -20 dBm and a maximum leakage power of -15 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 3.5 dB. Typical input VSWR for this limiter is 1.5:1 and whereas the typical output VSWR is 2:1. Our PE80L2013 limiter supports a maximum average input power of 1 W. This high power limiter is 1.77 inches long, 1.18 inches wide, and 0.47 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2010 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 50 MHz, Maximum Frequency: 6 GHz, Maximum Insertion Loss: 2 dB, Design Type: High Power, Peak Power: 100 Watt. High Power Limiter, SMA, 100W Peak Power, 16.5 dBm Flat Leakage, 50 MHz to 6 GHz. The PE80L2010 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 100 watts. Our PE80L2010 is a high power coaxial RF power limiter with a maximum insertion loss of 2 dB. Pasternack SMA to SMA limiter has a minimum frequency of 50 MHz and a maximum frequency of 6 GHz. This high-quality radio frequency limiter is constructed of copper and has a typical leakage power of 16.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 1.5 dB. Our 100 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.5:1 and whereas the typical output VSWR is 2:1. Our PE80L2010 limiter supports a maximum average input power of 30 W. This high power limiter is 1.26 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE80L2016 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 500 MHz, Maximum Frequency: 6 GHz, Maximum Insertion Loss: 1 dB, Design Type: High Power, Peak Power: 100 Watt, Leakage (CW): 16 dBm. High Power Limiter, SMA, 100W Peak Power, 16 dBm Flat Leakage, 500 MHz to 6 GHz. The PE80L2016 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 100 watts. Our PE80L2016 is a high power coaxial RF power limiter with a maximum insertion loss of 1 dB. Pasternack SMA to SMA limiter has a minimum frequency of 500 MHz and a maximum frequency of 6 GHz. This high-quality radio frequency limiter is constructed of aluminum and has a maximum leakage power of 16 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. The Pasternack high power limiter has a typical insertion loss of 0.8 dB. Our 100 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.8:1 and whereas the typical output VSWR is 2:1. Our PE80L2016 limiter supports a maximum average input power of 50 W. This high power limiter is 0.79 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 1 | ||
 Venkel Ltd. | SWCR0603-RL-201JT | VENKEL LTD | Surge Withstanding CR;0603;1/8W;�200PPM;200R;�5% RoHS : Compliant | 0 | ||
| PWCR0805-BL-201JT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;200R;�5% RoHS : Compliant | 0 | |||
| SWCR0603-UL-201JT | VENKEL LTD | Surge Withstanding CR;0603;1/3W;�200PPM;200R;�5% RoHS : Compliant | 0 | |||
| SWCR0805-BL-201KT | VENKEL LTD | Surge Withstanding CR;0805;2/5W;�200PPM;200R;�10% RoHS : Compliant | 0 | |||
| SWCR0603-RL-201MT | VENKEL LTD | Surge Withstanding CR;0603;1/8W;�200PPM;200R;�20% RoHS : Compliant | 0 | |||
| SWCR0603-TL-201KT | VENKEL LTD | Surge Withstanding CR;0603;1/4W;�200PPM;200R;�10% RoHS : Compliant | 0 | |||
| SWCR0805-VL-201KT | VENKEL LTD | Surge Withstanding CR;0805;1/2W;�200PPM;200R;�10% RoHS : Compliant | 0 | |||
| PWCR0805-TL-201JT | VENKEL LTD | Pulse Withstanding CR;0805;1/4W;�200PPM;200R;�5% RoHS : Compliant | 0 | |||
| SWCR0603-TL-201JT | VENKEL LTD | Surge Withstanding CR;0603;1/4W;�200PPM;200R;�5% RoHS : Compliant | 0 | |||
| SWCR0805-VL-201JT | VENKEL LTD | Surge Withstanding CR;0805;1/2W;�200PPM;200R;�5% RoHS : Compliant | 0 | |||
| SWCR0805-TL-201MT | VENKEL LTD | Surge Withstanding CR;0805;1/4W;�200PPM;200R;�20% RoHS : Compliant | 0 | |||
| PWCR0603-QL-201JT | VENKEL LTD | Pulse Withstanding CR;0603;1/10W;�200PPM;200R;�5% RoHS : Compliant | 0 | |||
| AGCR0201-NL-201JT | VENKEL LTD | Auto Grade Resistor;0201;1/20W;�200PPM;200R;�5% RoHS : Compliant | 0 | |||
| PWCR0603-TL-201JT | VENKEL LTD | Pulse Withstanding CR;0603;1/4W;�200PPM;200R;�5% RoHS : Compliant | 0 | |||
| PWCR0805-VL-201JT | VENKEL LTD | Pulse Withstanding CR;0805;1/2W;�200PPM;200R;�5% RoHS : Compliant | 0 | |||
 Waytek, Inc. | AL-20-100-SS-CT-C | Advanced Cable Ties Inc | ACT AL-20-100-SS-CT-C 316 coated stainless steel cable tie is a corrosion-resistant metal tie with 150 lb. tensile strength for securing wire bundles, hoses, and tubing in harsh environments. Its coated stainless construction supports durable fastening where heat, moisture, chemicals, or vibration are present. |
| 1,000 | |
 Wuhan P&S | WSL2010R0680FEA | Vishay Intertechnologies | Current sensing resistor RoHS : Compliant |
| 12,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand