| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
K1110BACSM-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() TME | B72207S301K111 | TDK Corporation | Varistor: metal-oxide; THT; 300VAC; 385VDC; 470V; 1.2kA; 7mm |
| 1,941,800 | |
| BLH126K112B104 | Knowles Precision Devices | Capacitor: polypropylene; 12uF; 1.1kVDC; Leads: axial; THT; BLH |
| 70 | ||
| EFDKA80K117F064DH | Eaton Corporation | Capacitor: polypropylene; 110uF; 800VDC; Leads: radial; THT; ±10% |
| 35 | ||
| 3SK1112-1BB40 | Siemens | Automation module: safety relay; 24VDC; for DIN rail mounting RoHS : Compliant |
| 2 | ||
| RK11K1140A3L | Alps Alpine Co Ltd | Potentiometer: shaft; 10kΩ; single turn; vertical; 50mW; ±20%; 6mm RoHS : Compliant |
| 0 | ||
| 3LD3030-1TK11 | Siemens | Switch-disconnector; Poles: 3; on panel,for DIN rail mounting RoHS : Compliant |
| 0 | ||
| 3SK1122-2CB41 | Siemens | Automation module: safety relay; 24VDC; for DIN rail mounting RoHS : Compliant |
| 0 | ||
| 8 PK 1125 RB | OPTIBELT GmbH | Wedge belt |
| 0 | ||
| 3517-4 08 K11 S03V03 | Lumberg Connect GmbH | Connector: card edge; plug; RAST 2.5; female; power supply; 4A |
| 0 | ||
| 3LD2405-0TK11 | Siemens | Switch-disconnector; Poles: 3; on panel; 250A; -25÷55°C; 3LD2 RoHS : Compliant |
| 0 | ||
| 3LD2430-0TK11 | Siemens | Switch-disconnector; Poles: 3; on panel,for DIN rail mounting RoHS : Compliant |
| 0 | ||
| 3LD3230-0TK11 | Siemens | Switch-disconnector; Poles: 3; on panel,for DIN rail mounting RoHS : Compliant |
| 0 | ||
| 3SK1121-1CB44 | Siemens | Automation module: safety relay; 24VDC; for DIN rail mounting RoHS : Compliant |
| 0 | ||
| 9TK118 | KING TONY | Leverage spoon; 458mm |
| 0 | ||
| FK 11 L AU / RT | Schutzinger GmbH | Laboratory connector: 2mm banana; plug; 10A; 33VAC; 70VDC; red |
| 0 | ||
![]() Avnet Americas | AC0402FR-075K11L | YAGEO Corporation | SMD Chip Resistor, 5.11 kOhm, ? 1%, 63 mW, 0402 [1005 Metric], Thick Film, General Purpose - Tape and Reel (Alt: AC0402FR-075K11L) RoHS : Compliant |
| 240,000 | |
| CRCW12065K11FKTA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW12065K11FKTA) RoHS : Not Compliant |
| 25,000 | ||
| M55342K11B10E0RS2 | Vishay Intertechnologies | SMD Chip Resistor, 10 kohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K11B10E0RS2) RoHS : Not Compliant |
| 22,500 | ||
| M55342K11B1E00RS2 | Vishay Intertechnologies | SMD Chip Resistor, 1 kohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K11B1E00RS2) RoHS : Not Compliant | 20,000 | |||
| CRCW04025K11FKEDC | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW04025K11FKEDC) RoHS : Compliant |
| 20,000 | ||
C3216X7R2J103K115AA![]() | TDK Corporation | SMD Multilayer Ceramic Capacitor, 0.010 uF, 630 V, 1206 [3216 Metric], ? 10%, X7R, C Series, 3.2 mm - Tape and Reel (Alt: C3216X7R2J103K115AA) RoHS : Compliant |
| 14,000 | ||
CGA5H4X7R2J472K115AA![]() | TDK Corporation | - Tape and Reel (Alt: CGA5H4X7R2J472K115AA) RoHS : Compliant |
| 12,000 | ||
| AC0603FR-075K11L | YAGEO Corporation | SMD Chip Resistor, 5.11 kOhm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film, General Purpose - Tape and Reel (Alt: AC0603FR-075K11L) RoHS : Compliant |
| 5,000 | ||
| M55342K11B100DRS3 | Vishay Intertechnologies | SMD Chip Resistor, 100 ohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K11B100DRS3) RoHS : Not Compliant |
| 5,000 | ||
C3216X7R1H224K115AA![]() | TDK Corporation | - Tape and Reel (Alt: C3216X7R1H224K115AA) RoHS : Compliant |
| 2,000 | ||
| RK09K1130A6S | Alpine Electronics (Asia) Ltd | - Bulk (Alt: RK09K1130A6S) RoHS : Compliant |
| 2,000 | ||
| M55342K11B2E49RUL | Vishay Intertechnologies | SMD Chip Resistor, 2.49 kohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K11B2E49RUL) RoHS : Not Compliant | 1,000 | |||
| CMF505K1100FHEB | Vishay Intertechnologies | - Tape and Reel (Alt: CMF505K1100FHEB) RoHS : Compliant |
| 1,000 | ||
| M8340107K1152FGD03 | Vishay Intertechnologies | MSM06A-03 11.5K 1% K M8340107K1152FG D03 - Rail/Tube (Alt: M8340107K1152FGD03) RoHS : Not Compliant |
| 190 | ||
TK11A65W,S5X![]() | Toshiba America Electronic Components | - Rail/Tube (Alt: TK11A65W,S5X) RoHS : Compliant |
| 45 | ||
![]() Newark | CRCW12065K11FKTA | Vishay Intertechnologies | Chip Res Smd, 5K11, ±1%, 250Mw; |Vishay CRCW12065K11FKTA RoHS : Not Compliant |
| 9,540 | |
| CRCW12065K11FKTA | Vishay Intertechnologies | Chip Res Smd, 5K11, ±1%, 250Mw; |Vishay CRCW12065K11FKTA RoHS : Not Compliant |
| 9,540 | ||
C3216X7R2J222K115AA![]() | TDK Corporation | Cap, Mlcc, 2200Pf, 630V, 1206; |Tdk C3216X7R2J222K115AA RoHS : Compliant |
| 4,000 | ||
C3216X7R2J222K115AA![]() | TDK Corporation | Cap, Mlcc, 2200Pf, 630V, 1206; |Tdk C3216X7R2J222K115AA RoHS : Compliant |
| 4,000 | ||
| AC0603FR-075K11L | YAGEO Corporation | Chip Res Smd, 5K11, ±1%, 100Mw; |Yageo AC0603FR-075K11L RoHS : Compliant |
| 2,014 | ||
| AC0603FR-075K11L | YAGEO Corporation | Chip Res Smd, 5K11, ±1%, 100Mw; |Yageo AC0603FR-075K11L RoHS : Compliant |
| 2,014 | ||
CGA5H2X7R2A473K115AA![]() | TDK Corporation | Cap, 0.047?f, 100V, 10%, X7R, 1206; Available Until Stocks Are Exhausted Alternative Available |Tdk CGA5H2X7R2A473K115AA RoHS : Compliant |
| 2,000 | ||
| FS32K116LIT0VLFT | NXP Semiconductors | Mcu, 32Bit, 48Mhz, Lqfp-48; |NXP Semiconductors FS32K116LIT0VLFT RoHS : Compliant |
| 135 | ||
| BLH205K112A042 | Knowles CDE | Cap Pwr Film, 2Uf, 1.1Kv, Pc Pin; Available Until Stocks Are Exhausted |Cornell Dubilier BLH205K112A042 RoHS : Compliant |
| 105 | ||
| 8530K11 | Safran Group | Toggle Switch, Off-(On), Spst; |Safran Power 8530K11 RoHS : Not Compliant |
| 61 | ||
| BLH406K112C134 | Knowles CDE | Cap Pwr Film, 40Uf, 1.1Kv, Pc Pin; Available Until Stocks Are Exhausted |Cornell Dubilier BLH406K112C134 RoHS : Compliant |
| 47 | ||
| DNFF080BK115 | Hammond Manufacturing | Fan Kit, Dnff Series, 80Mm Fan, 115Vac; |Hammond DNFF080BK115 RoHS : Compliant |
| 14 | ||
| K11M07-P09LCC0-6570 | ODU Steckverbindungssysteme Gmbh & Co Kg | Circular Connector, Rcpt, 9Pos, Cable; Product Range:Medi-Snap Series; Circular Connector Shell Style:Cable Mount Receptacle; No. Of Contacts:9Contacts; Circular Contact Type:Solder Socket; Coupling Style:Push-Pull Rohs Compliant: Yes RoHS : Compliant |
| 13 | ||
| EFDKA70K117F064DHT | Eaton Electronics | Cap Pwr Film, 110Uf, 700V, Radial; |Eaton Electronics EFDKA70K117F064DHT RoHS : Compliant |
| 4 | ||
| K11 | Daniels Manufacturing Corporation (DMC) | Positioner; |Daniels K11 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | LTC2222CUK-11#PBF | Analog Devices Inc | 11-B, 105Msps ADC RoHS : Compliant |
| 0 | |
| LTC2222IUK-11#TRPBF | Analog Devices Inc | 11-B, 105Msps ADC RoHS : Compliant |
| 0 | ||
| LTC2222CUK-11#TRPBF | Analog Devices Inc | 11-B, 105Msps ADC RoHS : Compliant |
| 0 | ||
| LTC2222IUK-11#PBF | Analog Devices Inc | 11-B, 105Msps ADC RoHS : Compliant |
| 0 | ||
![]() RS | 8530K11 | SAFRAN | SWITCH, TOGGLE, 1 POLE, OFF-NONE-(ON), 11A, 115VAC, IP68 SEALED, SCREW TERMINAL |
| 75 | |
| VP5006PK111H00 | Norgren | VALVE, PROPORTIONAL CONTROL, 10V, 90PSI, 1/4NPT, VP50 SERIES |
| 8 | ||
| ER6-WK11 (COMP-203) | Dantona Industries Inc | BATTERY, NON-RECHARGEABLE, LITHIUM,3.6VDC,1.9AH, CONNECTOR, REPLACEMENT BATTERY, |
| 7 | ||
| SK 1 1/2 | Martin Sprocket & Gear Inc | BUSHING, QD, QUICK DISCONNECT, SK, 1 1/2" BORE |
| 6 | ||
| LELK1-1RS4-30452-80 | Sensata Technologies | CIRCUIT BREAKER MAGNETIC-HYDRAULIC 80A TOGGLE 80 VDC UL489 1 POLE |
| 5 | ||
| M22-WRK-K11 | Eaton Cutler-Hammer | NON-ILLUMINATED SWITCH, SILVER BEZEL, 2-POS, 1NO-1NC, MAINTAINED, M22 SERIES |
| 3 | ||
| LELHK111-1-62-25.0-U-01-V | Sensata Technologies | CIRCUIT BREAKER, HYDRAULIC MAGNETIC, 3 POLE, LEL SERIES |
| 3 | ||
| CELHPK11-1REC4-32537-1 | Sensata Technologies | CIRCUIT BREAKER HYDMAG 2 PL 80VDC 200A PLUG IN AUX SW UL489A |
| 2 | ||
| IHM04-1B5PSVU2K (1101608) | SICK AG | INDUCTIVE PROXIMITY SENSORS, IHM04-1B5PSVU2K |
| 2 | ||
| 1236563 (EV-T1G2CC-DC80A-7,0M6ASBK11) | Phoenix Contact | EV-T1G2CC-DC80A-7,0M6ASBK11, EV CHARGING CABLES |
| 2 | ||
| CE3K1-10R-11 | ABB Low Voltage Products and Systems | 30MM KE-REL RED 1 NO |
| 1 | ||
| K71EA00KS6K11 | Norgren | VALVE, PNEUMATIC DIRECT SOLENOID, NUGGET 200 VALVES |
| 1 | ||
| EZA-MBK-11 (71470) | Banner Engineering Corp | RIGHT ANGLE MOUNTING BRACKET FOR EZ SCREEN EMITTER OR RECEIVER, STEEL |
| 1 | ||
| IELBXK1-1-72-60.0-GK-N6-V | Sensata Technologies | CIRCUIT BREAKER, HYDRAULIC, MAGNETIC, 1 POLE, IEL SERIES |
| 1 | ||
| K11 | Norgren | SOLENOID OPERATOR, PTF, NON LOCK, NONDET,2 POSIT, INT PILOT, FOR NUGGET 200 VALVE |
| 0 | ||
![]() Microchip Technology Inc | VSC8514XMK-11 | Microchip Technology Inc | 4 Port GbE Cu PHY with QGMII and No SyncE, VQFN, Projected EOL: 2046-10-19 RoHS : Compliant |
| 10 | |
![]() Rochester Electronics | FS32K116LIT0VLFT | NXP Semiconductors | IC MCU ARM® Cortex®-M0+ 32Bit 1 Core FLASH 128kB (128k x 8) 48MHz 48-QFP Tray RoHS : Compliant |
| 2,442 | |
LPC1104UK,118![]() | NXP Semiconductors | IC MCU ARM® Cortex®-M0 32Bit 1 Core FLASH 32kB (32k x 8) 50MHz 16-BGA T/R RoHS : Compliant |
| 29,634 | ||
PEMI2STD/CK,115![]() | NXP Semiconductors | EMI FILTER Low Pass RC (Pi) SOT-665 T/R RoHS : Compliant |
| 192,000 | ||
PEMI2STD/RK,115![]() | NXP Semiconductors | EMI FILTER Low Pass RC (Pi) SOT-665 T/R RoHS : Compliant |
| 8,000 | ||
CBTD3384DK,118![]() | NXP Semiconductors | IC Bus Switch 2 Element 5 x 1:1 MUX/DEMUX 4.5V - 5.5V 24-SOP T/R RoHS : Compliant |
| 7,020 | ||
74CBTLV3384DK,118![]() | NXP Semiconductors | Bus Driver, CBTLV/3B Series, 1-Func, 10-Bit, True Output, CMOS, PDSO24 RoHS : Compliant |
| 22,500 | ||
UJA1164TK,118![]() | NXP Semiconductors | Specialized Power Management System Basis Chip 14-SON T/R RoHS : Compliant |
| 5 | ||
UJA1018TK,118![]() | NXP Semiconductors | Specialized Power Management System Basis Chip 16-SON T/R RoHS : Compliant |
| 5,659 | ||
PEMI2STD/HK,115![]() | NXP Semiconductors | EMI FILTER Low Pass RC (Pi) SOT-665 T/R RoHS : Compliant |
| 184,000 | ||
UJA1161TK,118![]() | NXP Semiconductors | IC INTERFACE Transceiver CAN 2Mbps 4.5V - 28V 14-SON T/R RoHS : Compliant |
| 3,785 | ||
| RP114K111D5-TR | Nisshinbo Micro Devices | Fixed Positive LDO Regulator, 1.15V, 0.59V Dropout, CMOS, PDSO4 RoHS : Compliant |
| 30,000 | ||
| 2SK1133(0)-T1B-A | Renesas Electronics Corporation | MOSFET N-Channel 50V 100mA (Ta) SOT-23-3 RoHS : Compliant |
| 8,851 | ||
2SK1160-E![]() | Renesas Electronics Corporation | MOSFET N-Channel 500V 8A TO-220-3 Tube RoHS : Compliant |
| 716 | ||
LK112M33TR![]() | STMicroelectronics | IC VOLT REG Fixed 1 REG 3.3V 150mA SOT-23-5 T/R RoHS : Compliant |
| 9,598 | ||
| SSM3K119TU,LF(B | Toshiba America Electronic Components | MOSFET N-Channel 30V 2.5A 3-SMD RoHS : Compliant |
| 69,000 | ||
![]() Sager | IELHK111-1-61F-60.0-ABK-11-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 294 | |
| IULK1-1REC4-52-60.0-AK-11 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| TK118A-RT | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| TMS-SCE-0.5K-1-1/2-2.0-9 | TE Connectivity | Heat Shrink Tubing & Sleeves TMS-SCE-0.5K-1-1/2-2.0-9 | 0 | |||
| CMLHPK11-1RLS5-36002-200 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| CMLHPK111-1REC5-33592-250 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| CMLHPK111-1REC5-52-250.-91 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| CELBXPK11-1REC4-52-200.-M3-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr, HydMag, 1 pl, 125VAC, 25A |
| 0 | ||
| CELHK11-71165-8-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| CELHPK11-1REC4-33522-200 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| CELHPK11-1REC4-34668-200 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| CELHPK11-1REC4-52-200.-A-01 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| CELHPK11-1RS4-32537-2 | Sensata Circuit Breakers | Circuit Breakers CIRCUIT BREAKER |
| 0 | ||
| CELHPK111-1REC4-32521-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| CELHPK111-1REC5-32759-300 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
![]() Ameya Holding Limited | RC0402FR-075K11L | YAGEO Corporation | RoHS : Compliant | 100,000 | ||
| RC1206FR-075K11L | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC0603FR-075K11L | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC0805FR-075K11L | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
LK112M33TR![]() | STMicroelectronics | LK112 Series 150 mA 3.3 V Fixed LDO Voltage Regulator with Shutdown - SOT-23-5 RoHS : Compliant | 12,080 | |||
| CRCW06035K11FKTABC | NXP Semiconductors | 7,796 | ||||
| QS8K11TCR | ROHM Semiconductor | 4V驱动双N沟道MOSFET RoHS : Compliant |
| 3,000 | ||
| HS8K11TB | ROHM Semiconductor | 30V 双N沟道功率MOSFET RoHS : Compliant |
| 2,200 | ||
| B72205S271K111 | Infineon Technologies AG | 1,399 | ||||
| SH8K11GZETB | ROHM Semiconductor |
| 50 | |||
![]() ComSIT USA | LK112M25TR![]() | STMicroelectronics | AVAILABLE EU RoHS : Compliant | 41,736 | ||
LK112M60TR![]() | STMicroelectronics | AVAILABLE EU RoHS : Compliant | 97,142 | |||
| LMLK11RLS43274213 | SENSATA TECHNOLOGIES | AVAILABLE EU | 20 | |||
![]() ComSIT USA | TJA1022TK118 | NXP Semiconductors | IC INTERFACE Transceiver LIN 20kBaud 5V - 18V 14-SON T/R RoHS : Compliant | 60,000 | ||
| B72207S1140K111 | TDK Electronics | Varistor 24.2V 250A Radial T/R RoHS : Compliant | 9,000 | |||
| RT0805BRB075K11L | YAGEO Corporation | Fixed Resistor, Thin Film, 0.125W, 5110ohm, 150V, 0.1% +/-Tol, 10ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 5,000 | |||
| LBT676K11 | OSRAM GmbH | Electronic Component RoHS : Compliant | 4,000 | |||
| LST67KK1102 | OSRAM GmbH | Electronic Component RoHS : Compliant | 2,810 | |||
| TK11230CMCL | TOKO Inc | LDO REGULATOR WITH ON/OFF SWITCH Fixed Positive LDO Regulator, 3V, 0.37V Dropout, CMOS, PDSO6 RoHS : Not Compliant | 2,600 | |||
| LSM670K110 | OSRAM GmbH | Visible LED, Clear RoHS : Compliant | 2,185 | |||
| LST670BINK11010 | OSRAM GmbH | Electronic Component RoHS : Compliant | 2,015 | |||
| LST77KK1102 | OSRAM GmbH | Electronic Component RoHS : Compliant | 2,000 | |||
| RK1191124001 | Alps Alpine Co Ltd | ROTARY POTENTIOMETER Potentiometer, 0.05W, 10000ohm, 20% +/-Tol, 1 Turn(s) RoHS : Compliant | 1,190 | |||
| RK117111400C | Alps Alpine Co Ltd | Potentiometer, 10000ohm, 20% +/-Tol, 1 Turn(s) RoHS : Not Compliant | 800 | |||
| LTGY2K11JD | Lite-On Semiconductor Corporation | Electronic Component RoHS : Not Compliant | 281 | |||
| SK115MAA10 | SEMIKRON | SEMITOP 2 MOSFET MODULE Power Field-Effect Transistor, 95A I(D), 100V, 0.0045ohm, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 161 | |||
| AK1102DS75V | Hartmann Electronic | Electronic Component RoHS : Compliant | 153 | |||
| SH100CK1115B31 | Siemens | Electronic Component RoHS : Not Compliant | 18 | |||
![]() Interstate Connecting Components | 177-740-2-21GP6K1-120BSN | Glenair Inc | Shielded Micro D | 0 | ||
| TVBK1135PSE | Amphenol PCD | TVB | 0 | |||
| YK1132533000G | Amphenol Anytek | YK-113- 25P BLACK - COMBINAT | 0 | |||
| YK1141533000G | Amphenol Anytek | YK-114- 15P BLACK - COMBINAT | 0 | |||
| VK1111500000G | Amphenol Anytek | VK-3.5-11P GREEN CONTACT WI | 0 | |||
| MWDM1L-100GS-6K1-18B | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MWDM1L-15CS-6K1-16M | Glenair Inc | 0 | ||||
| MWDM1L-21CS-6K1-16B | Glenair Inc | 0 | ||||
| MWDM1L-51GP-6K1-13M | Glenair Inc | MICRO-D CONNECTOR |
| 0 | ||
| MWDM1L-9GS-6K1-18B | Glenair Inc | RoHS : Not Compliant | 0 | |||
| MWDM2L-100S-4K1-18B | Glenair Inc | RoHS : Compliant | 0 | |||
| MWDM2L-15P-6K1-18F | Glenair Inc | RoHS : Compliant | 0 | |||
| MWDM2L-15S-4K1-18M | Glenair Inc | RoHS : Compliant | 0 | |||
| MWDM2L-25CS-6K1-17B | Glenair Inc | 0 | ||||
| MWDM2L-31CS-6K1-180B | Glenair Inc | 0 | ||||
![]() PEI Genesis | D38999/33K11N | Amphenol PCD |
| 153 | ||
| IP-UNCK11ZN | Sure Seal Connections |
| 124 | |||
| IP-UNCK11ZN-S | Sure Seal Connections |
| 124 | |||
| D38999/32K11N | Amphenol PCD |
| 37 | |||
| D38999/32K11R | Amphenol PCD |
| 35 | |||
| TV06RK-11-19S-LC | Amphenol Corporation |
| 0 | |||
| NX-K11YAR-P14WCD0-0000 | Amphenol Corporation |
| 0 | |||
| TV06RK-11-19SA | Amphenol Corporation |
| 0 | |||
| TV06RK-11-19SA-LC | Amphenol Corporation |
| 0 | |||
| TV06RK-11-19PA-LC | Amphenol Corporation |
| 0 | |||
| NX-K11YAR-P08WFG0-0000 | Amphenol Corporation |
| 0 | |||
| TV06RK-11-19PA | Amphenol Corporation |
| 0 | |||
| NX-K11YAR-P16WCD0-0000 | Amphenol Corporation |
| 0 | |||
| TV06RK-11-19S | Amphenol Corporation |
| 0 | |||
| TV06RK-11-19PB | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | TMS-SCE-1K-1-1/2-2.0-5 | TE Connectivity | Connectors |
| 7,894 | |
| LK11 U | Altech Corporation | Door Interlock Handle, Pistol, |
| 249 | ||
| 85127K-11 | Honeywell Sensing and Control | Switch |
| 92 | ||
| TVPS00RK-11-99S | Amphenol Corporation | CONNECTOR RoHS : Compliant |
| 50 | ||
| TVS07RK-11-98S | Amphenol Corporation | CONNECTOR RoHS : Compliant |
| 37 | ||
| TVS07RK-11-98P | Amphenol Corporation | CONNECTOR RoHS : Compliant |
| 37 | ||
MRK112-CE![]() | NKK Switches | HALF-INCH DIAMETER PROCESS SEALED ROTARY RoHS : Compliant |
| 21 | ||
| 6K110HF | Hammond Manufacturing | POWER TX 50/60HZ |
| 11 | ||
1182K110![]() | Hammond Manufacturing | TOROID, 160VA,50/60HZ,110/110V RoHS : Compliant |
| 6 | ||
| TVS07RK-11-35PB | Amphenol Corporation | CONNECTOR RoHS : Compliant |
| 3 | ||
| MWDM2L-100S-4K1-12H | Glenair Inc | MICRO-D CONNECTORS - MICRO-D CONNECTORS |
| 3 | ||
| TVPS00RK-11-98SA | Amphenol Corporation | CONNECTOR RoHS : Compliant |
| 3 | ||
| LFK1110 | Hammond Manufacturing | FILTERMAT 2/PKG RoHS : Compliant |
| 1 | ||
| HFW1201K114 | CII Guardian | MIL/AERO RELAY HFW1201K114 |
| 1 | ||
| TVS06RK-11-99S | Amphenol Corporation | CONNECTOR |
| 1 | ||
![]() Chip 1 Exchange | RC12H5K11 1% | Philips Semiconductors | INSTOCK | 280,000 | ||
| TK11128MCL | TOKO Inc | INSTOCK RoHS : Not Compliant | 64,000 | |||
| LBT676-K1-1-0-10 | INSTOCK | 24,000 | ||||
| RC0603FR-075K11 | YAGEO Corporation | INSTOCK RoHS : Compliant | 9,347 | |||
| MFCH 5.11K 1% 1206 | Vishay BCcomponents | INSTOCK | 7,050 | |||
| R2K1/1% | Vishay Draloric | INSTOCK | 4,942 | |||
| B72207-S600-K111 | TDK Electronics | INSTOCK | 4,500 | |||
| 0805 68K1 1% 1/8W | INSTOCK | 3,619 | ||||
| MF CH 33.2K 1% 1206 | Vishay BCcomponents | INSTOCK | 3,145 | |||
| MMA0204-50BL-2K1+-1% | INSTOCK | 2,900 | ||||
| B72205S400K111V5 | TDK Electronics | INSTOCK | 1,807 | |||
| TK11229BMCL | TOKO Inc | INSTOCK RoHS : Not Compliant | 1,285 | |||
| B37872-K1104-K62 | TDK Electronics | INSTOCK | 1,226 | |||
| MF CH 33.2K 1% 1206 | Vishay Intertechnologies | INSTOCK | 925 | |||
| ARK111RK112V | Panasonic Electronic Components | INSTOCK | 36 | |||
![]() Avnet Abacus | B72207S301K111 | TDK Corporation | TVS Varistor 300 VAC 385 VDC StandarD B722 775 V Disc Radial Leaded 7 mm (Alt: B72207S0301K111) RoHS : Compliant | 1,996,800 | ||
| RC0402FR-075K11L | YAGEO Corporation | SMD Chip Resistor 511 kOhm 1 63 mW 0402 1005 Metric Thick Film General Purpose - Tape and Reel (Alt: RC0402FR-075K11L) RoHS : Compliant | 550,000 | |||
| B72207S271K111 | TDK Corporation | TVS Varistor 275 VAC 350 VDC StandarD B722 710 V Disc Radial Leaded 7 mm (Alt: B72207S0271K111) RoHS : Compliant | 480,000 | |||
| CRCW08055K11FKEA | Vishay Intertechnologies | SMD Chip Resistor 511 kohm 1 250 mW 0805 2012 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW08055K11FKEA) RoHS : Compliant | 200,000 | |||
| CRCW06035K11FKEA | Vishay Intertechnologies | SMD Chip Resistor 511 kohm 1 125 mW 0603 1608 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW06035K11FKEA) RoHS : Compliant | 185,000 | |||
| B72205S251K111 | TDK Corporation | TVS Varistor 250 VAC 320 VDC StandarD B722 650 V Disc Radial Leaded 5 mm (Alt: B72205S0251K111) RoHS : Compliant | 99,000 | |||
| RC1206FR-075K11L | YAGEO Corporation | SMD Chip Resistor 511 kOhm 1 250 mW 1206 3216 Metric Thick Film General Purpose - Tape and Reel (Alt: RC1206FR-075K11L) RoHS : Compliant | 60,000 | |||
| RT0603BRD075K11L | YAGEO Corporation | SMD Chip Resistor 511 kOhm 01 100 mW 0603 1608 Metric Thin Film - Tape and Reel (Alt: RT0603BRD075K11L) RoHS : Compliant | 60,000 | |||
| B72207S350K111 | TDK Corporation | TVS Varistor 35 VAC 45 VDC StandarD B722 110 V Disc Radial Leaded 7 mm (Alt: B72207S0350K111) RoHS : Compliant | 19,500 | |||
| RK09K1130A6S | Alpine Electronics (Asia) Ltd | Rotary Potentiometer 10 kOhm 1Turn 50 mW 20 (Alt: RK09K1130A6S) RoHS : Compliant | 3,700 | |||
| RK11K1140097 | Alpine Electronics (Asia) Ltd | Rotary Potentiometer 10 kOhm 1Turn 50 mW 20 (Alt: RK11K1140097) RoHS : Compliant | 1,100 | |||
| K1155497 | TE Connectivity | Switch Emergency Stop 101A 32VDC DPDT Maintained (Alt: K1155497) RoHS : Not Compliant | 39 | |||
| K1142045 | TE Connectivity | (Alt: K1142045) RoHS : Not Compliant | 33 | |||
| K1130516 | TE Connectivity | Battery Disconnect Switch DPST Flange Mount (Alt: K1130516) RoHS : Not Compliant | 7 | |||
| K1127118 | TE Connectivity | Battery Disconnect Switch DPST Flange Mount (Alt: K1127118) | 3 | |||
![]() Avnet Asia | CRCW01005K11FREL | Vishay Intertechnologies | Res Thick Film 1005 5.11kOhm 1% 1/32W ?250ppm/K Molded Paper Tape (Alt: CRCW01005K11FREL) RoHS : Compliant | 20,000 | ||
| HS8K11TB | ROHM Semiconductor | (Alt: HS8K11TB) RoHS : Compliant |
| 15,000 | ||
| RMCF0603FT5K11 | SEI Stackpole Electronics Inc | (Alt: RMCF0603FT5K11) RoHS : Compliant |
| 15,000 | ||
| ACT41000EVK1-104 | Qorvo | (Alt: ACT41000EVK1-104) RoHS : Compliant | 0 | |||
| RK09K1130AP5 | Alpine Electronics (Asia) Ltd | (Alt: RK09K1130AP5) RoHS : Compliant | 0 | |||
| M55342K11B10B0RTF | Vishay Intertechnologies | SMD Chip Resistor, 10 kohm, ? 0.1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability (Alt: M55342K11B10B0RTF) RoHS : Compliant | 0 | |||
| M55342K11B2B49RTS | Vishay Intertechnologies | SMD Chip Resistor, 2.49 kohm, ? 0.1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability (Alt: M55342K11B2B49RTS) RoHS : Compliant | 0 | |||
| M55342K11B5E90RTSV | Vishay Intertechnologies | SMD Chip Resistor, 5.9 kohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability (Alt: M55342K11B5E90RTSV) RoHS : Compliant | 0 | |||
| M55342K11B10E0SWB | Vishay Intertechnologies | SMD Chip Resistor, 10 kohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability (Alt: M55342K11B10E0SWB) RoHS : Not Compliant | 0 | |||
| M55342K11B511DRTSV | Vishay Intertechnologies | SMD Chip Resistor, 511 ohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability (Alt: M55342K11B511DRTSV) RoHS : Compliant | 0 | |||
| M55342K11B39D0RS6 | Vishay Intertechnologies | (Alt: M55342K11B39D0RS6) RoHS : Compliant | 0 | |||
| M55342K11B49D9RS6 | Vishay Intertechnologies | (Alt: M55342K11B49D9RS6) RoHS : Compliant | 0 | |||
| M55342K11B274DRT0V | Vishay Intertechnologies | SMD Chip Resistor, 274 ohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability (Alt: M55342K11B274DRT0V) RoHS : Compliant | 0 | |||
| M55342K11B2E21RS6 | Vishay Intertechnologies | (Alt: M55342K11B2E21RS6) RoHS : Compliant | 0 | |||
| M55342K11B499ARTF | Vishay Intertechnologies | SMD Chip Resistor, 499 ohm, ? 0.1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability (Alt: M55342K11B499ARTF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FS32K116LFT0VLFR | NXP Semiconductors | Microcontroller 32Bit ARM Cortex M0 RISC 128KB Flash 48Pin LQFP TR (Alt: FS32K116LFT0VLFR) RoHS : Compliant | 88,000 | ||
| FS32K118LAT0MLFR | NXP Semiconductors | MCU 32Bit ARM Cortex M0 RISC 256KB Flash 33V5V 48Pin LQFP TR (Alt: FS32K118LAT0MLFR) RoHS : Compliant | 46,000 | |||
LK112SM18TR![]() | STMicroelectronics | Fixed LDO Voltage Regulator 25V to 14V 350mV drop 18V200mA out SOT235 (Alt: LK112SM18TR) RoHS : Compliant | 36,000 | |||
LK112M80TR![]() | STMicroelectronics | Fixed LDO Voltage Regulator 85V to 14V 290mV drop 8V150mA out SOT235 (Alt: LK112M80TR) RoHS : Compliant | 27,000 | |||
| FS32K116LAT0VLFR | NXP Semiconductors | MCU ARM CortexM0 128kbytes Flash 27V to 55V 48Pin LQFP TR (Alt: FS32K116LAT0VLFR) RoHS : Compliant | 20,000 | |||
LK112M18TR![]() | STMicroelectronics | Fixed LDO Voltage Regulator 25V to 14V 290mV drop 18V150mA out SOT235 (Alt: LK112M18TR) RoHS : Compliant | 15,000 | |||
LK112SM50TR![]() | STMicroelectronics | Fixed LDO Voltage Regulator 55V to 14V 350mV drop 5V200mA out SOT235 (Alt: LK112SM50TR) RoHS : Compliant | 12,000 | |||
HTSH4801ETK,118![]() | NXP Semiconductors | HITAG S Transponder IC 2 Pins HVSON ISO 1178485 ISO 14223 ISO 180002 (Alt: HTSH4801ETK,118) RoHS : Compliant | 6,000 | |||
| FS32K116LFT0MLFR | NXP Semiconductors | Microcontroller 32Bit ARM CortexM0 RISC 128KB Flash 27V to 55V 48Pin LQFP TR (Alt: FS32K116LFT0MLFR) RoHS : Compliant | 6,000 | |||
| FS32K118LAT0MLFT | NXP Semiconductors | ARM MCU 32bit ARM CortexM0 48 MHz 256 KB 25 KB 48 Pins LQFP (Alt: FS32K118LAT0MLFT) RoHS : Compliant | 1,250 | |||
| NKS7NEK1-18.4320-20T | Diodes Incorporated | Crystal Quartz 1843 MHz SMD 7mm x 5mm x 1mm 50 ppm 20 pf 30 ppm NKS7 (Alt: NKS7NEK1-18.4320-20(T)) RoHS : Compliant | 1,000 | |||
| FS32K118LAT0MLHT | NXP Semiconductors | MCU 32Bit S32K118 ARM CortexM0 RISC 256KB Flash 27V to 55V 64Pin LQFP Tray (Alt: FS32K118LAT0MLHT) RoHS : Compliant | 160 | |||
| FRDM-A-S32K118 | NXP Semiconductors | FRDMAS32K118 (Alt: FRDM-A-S32K118) RoHS : Compliant | 10 | |||
| FRDM-A-S32K118V | NXP Semiconductors | FRDMAS32K118V (Alt: FRDM-A-S32K118V) RoHS : Compliant | 10 | |||
| FS32K116LAT0MFMR | NXP Semiconductors | Microcontroller ARM Cortex M0 128Kbyte 48MHz 32Pin QFN TR (Alt: FS32K116LAT0MFMR) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMA18XAK1-120150Y | Aimtec |
| 0 | ||
| AMA36AK1-120300Y | Aimtec |
| 0 | |||
| AMA36UK1-120250Y | Aimtec |
| 0 | |||
| AMA40DK1-120033Y | Aimtec | RoHS : Compliant |
| 0 | ||
| AMA36EK1-120250Y | Aimtec |
| 0 | |||
| AMA24BK1-120200Y | Aimtec |
| 0 | |||
| AMA36DK1-120300Y | Aimtec | RoHS : Compliant |
| 0 | ||
| AMA5BK1-120050Y | Aimtec |
| 0 | |||
| AMA65BK1-120500Y | Aimtec |
| 0 | |||
| AMA65EK1-190342Y | Aimtec |
| 0 | |||
| AMA36UK1-120300Y | Aimtec |
| 0 | |||
| AMA24DK1-150100Y | Aimtec | RoHS : Compliant |
| 0 | ||
| AMA65DK1-120054Y | Aimtec |
| 0 | |||
| AMA40EK1-120033Y | Aimtec |
| 0 | |||
| AMA65AK1-190342Y | Aimtec |
| 0 | |||
![]() Component Electronics, Inc | RM1/16-26K1-1% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 4,500 | |
| CCF555K11FKE36 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,950 | ||
| B37941-K1102-K60 | Siemens | IN STOCK SHIP TODAY |
| 3,500 | ||
| RC1206FR-075K11 | IN STOCK SHIP TODAY | 2,500 | ||||
| MBB0207-50-1%-5T-5K11 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 2,150 | ||
| DK11251-S2 | Foxconn | IN STOCK SHIP TODAY | 2,000 | |||
| RC02H-30K1-1% | Philips Semiconductors | IN STOCK SHIP TODAY |
| 1,000 | ||
| LQH32CN100K11L | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant | 920 | |||
| MBB0207-25-0.1%-C1-5K11 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 590 | ||
| MRS25F-5K11 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 300 | ||
| K1135AA | CTI Electronics Corporation | IN STOCK SHIP TODAY | 139 | |||
| CMF-55-1K-1%-.1% | Vishay Dale | IN STOCK SHIP TODAY |
| 100 | ||
| MRS25F-5K11 | IN STOCK SHIP TODAY |
| 100 | |||
CGA5H2X8R2A104K115AA![]() | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| 00K11810 | Eaton Corporation | IN STOCK SHIP TODAY |
| 18 | ||
![]() DB Roberts | 24-99-529-MK1125 | Southco |
| 10 | ||
| AES10K116 | PennEngineering (PEM) | #10 | 0 | |||
| AES37K115CSI | PennEngineering (PEM) | 0 | ||||
| PK-11-16 | Southco | 0 | ||||
| LSK-1157-1 | Sugatsune Kogyo Co Ltd | 0 | ||||
| PK-116-13 | Southco | 0 | ||||
| AESM8K11.1 | PennEngineering (PEM) | M8 | 0 | |||
| AESSM12K11.1 | PennEngineering (PEM) | M12 | 0 | |||
| AENMM6K11.6 | PennEngineering (PEM) | M6 | 0 | |||
| AENMM8K11.1 | PennEngineering (PEM) | M8 | 0 | |||
| AESSM6K11.6 | PennEngineering (PEM) | M6 | 0 | |||
| LSK-1157-4 | Sugatsune Kogyo Co Ltd | STAINLESS STEEL WELD-ON HINGE | 0 | |||
| AEA10K-116 | PennEngineering (PEM) | Designed for high load applications. Countersunk feature allow fastener to be installed flush with sheet surface.Both UNC and UNF threads available in No. 10 and larger thread sizes. Check for availability of other grip ranges and designs. | 0 | |||
| K1185-18 | HeliCoil | K-PACK 1-18-7 1-12D FR | 0 | |||
| AESS37K115 | PennEngineering (PEM) | 3/8 | 0 | |||
![]() EBV Elektronik | FS32K116LAT0MLFT | NXP Semiconductors | ARM MCU S32 Family S32K1xx Series Microcontrollers ARM CortexM0 32 bit 48 MHz 128 KB (Alt: FS32K116LAT0MLFT) RoHS : Compliant | 93,000 | ||
| GENFS32K118LFT0VLFR | NXP Semiconductors | ARM MCU 32bit ARM Cortex M0 48 MHz 256 KB 25 KB 48 Pins LQFP (Alt: FS32K118LFT0VLFR) RoHS : Compliant | 76,000 | |||
| FS32K116LAT0MLFR | NXP Semiconductors | Microcontroller 32Bit ARM Cortex M0 RISC 128KB Flash 48Pin LQFP TR (Alt: FS32K116LAT0MLFR) RoHS : Compliant | 48,000 | |||
TJA1022TK,118![]() | NXP Semiconductors | LIN Transceiver 2 TX 2 RX 20KBd 14Pin HVSON EP TR (Alt: TJA1022TK,118) RoHS : Compliant | 30,000 | |||
| FS32K118LAT0MLFR | NXP Semiconductors | MCU 32Bit ARM Cortex M0 RISC 256KB Flash 33V5V 48Pin LQFP TR (Alt: FS32K118LAT0MLFR) RoHS : Compliant | 26,000 | |||
| BXCP-27H-11L-K11-3-A1-00-0-3 | Bridgelux Inc | CSP 1111 KSeries (Alt: BXCP-27H-11L-K11-3-A1-00-0-3) RoHS : Compliant | 18,000 | |||
| BXCP-65H-11L-K11-3-A1-00-0-3 | Bridgelux Inc | CSP 1111 KSeries (Alt: BXCP-65H-11L-K11-3-A1-00-0-3) RoHS : Compliant | 12,000 | |||
HTSH5601ETK,118![]() | NXP Semiconductors | HITAG S Transponder IC 2 Pins HVSON ISO 1178485 ISO 14223 ISO 180002 (Alt: HTSH5601ETK,118) RoHS : Compliant | 6,000 | |||
| BXCP-18G-11L-K11-3-A1-00-0-3 | Bridgelux Inc | CSP 1111 KSeries (Alt: BXCP-18G-11L-K11-3-A1-00-0-3) RoHS : Compliant | 6,000 | |||
| FS32K116LFT0VLFR | NXP Semiconductors | Microcontroller 32Bit ARM Cortex M0 RISC 128KB Flash 48Pin LQFP TR (Alt: FS32K116LFT0VLFR) RoHS : Compliant | 4,000 | |||
LK112M33TR![]() | STMicroelectronics | Fixed LDO Voltage Regulator 25V to 14V 290mV Dropout 33Vout 150mAout SOT235 (Alt: LK112M33TR) RoHS : Compliant | 3,000 | |||
LK112SM33TR![]() | STMicroelectronics | Fixed LDO Voltage Regulator 38V to 14V 350mV drop 33V200mA out SOT235 (Alt: LK112SM33TR) RoHS : Compliant | 3,000 | |||
LK112SM50TR![]() | STMicroelectronics | Fixed LDO Voltage Regulator 55V to 14V 350mV drop 5V200mA out SOT235 (Alt: LK112SM50TR) RoHS : Compliant | 3,000 | |||
NX3L4684TK,115![]() | NXP Semiconductors | Analog Switch Dual SPDT 10Pin HVSON EP TR (Alt: NX3L4684TK,115) RoHS : Compliant | 1,400 | |||
| MK11DX128AVLK5 | NXP Semiconductors | MCU 32Bit K11 ARM Cortex M4 RISC 128KB Flash 18V25V33V 80Pin LQFP Brick (Alt: MK11DX128AVLK5) RoHS : Compliant | 864 | |||
![]() Flip Electronics | CY5057K-11WAF-IL | Infineon Technologies AG | Stock | 95,540 | ||
| R5F524T8ADFK#11 | Renesas Electronics Corporation | Stock RoHS : Compliant | 36,000 | |||
| FS32K118LAT0VLHR | NXP Semiconductors | Stock RoHS : Compliant | 27,100 | |||
| FS32K118LAT0VLHT | NXP Semiconductors | Stock RoHS : Compliant | 27,100 | |||
| FS32K118LAT0MLHR | NXP Semiconductors | Stock RoHS : Compliant | 27,100 | |||
| FS32K118BRT0VLHT | NXP Semiconductors | Stock RoHS : Compliant | 27,100 | |||
2SK1158-E![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 8,612 | |||
LPC1102UK,118![]() | NXP Semiconductors | Stock RoHS : Compliant | 6,000 | |||
| FX32K116LAT0MFMR | NXP Semiconductors | Stock | 5,000 | |||
| MK11DX128VLK5 | NXP Semiconductors | Stock RoHS : Compliant | 925 | |||
STK11C68-SF25![]() | Cypress Semiconductor | Stock RoHS : Compliant | 906 | |||
| 2SK1152L-E | Renesas Electronics Corporation | Stock RoHS : Compliant | 353 | |||
2SK1162-E![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 326 | |||
| FS32K116LIT0VLFT | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 39 | ||
| STK11C68-5C55M | Infineon Technologies AG | Stock, Ship Today |
| 14 | ||
![]() Master Electronics | RK11K1140A3L | Alps Alpine Co Ltd | Res POT 10K Ohm 20% 0.05W(1/20W) 1(Elec)/1(Mech)Turn 6mm (12 X 31mm) Pin Panel Mount/Bracket Mount RoHS : Compliant |
| 2,685 | |
| K11 | Crouzet | Conn Relay Socket SKT 11 POS Screw ST SMD RoHS : Compliant |
| 83 | ||
| CELHPK11-1RS4-32537-2 | Sensata Circuit Breakers | Circuit Breaker Magnetic (Hydraulic Delay) - 2 Pole - 80VDC - 200A - Alarm Switch - .110 Quick Connect - Lever - Panel Mount. RoHS : Compliant |
| 5 | ||
| RK11K1140A9L | Alps Alpine Co Ltd | Res POT 10K Ohm 20% 0.05W(1/20W) 1(Elec)/1(Mech)Turn 6mm (12 X 26mm) Pin Panel Mount/Bracket Mount Tray RoHS : Compliant |
| 2 | ||
| IELHK111161F60.0ABK11V | Sensata Circuit Breakers | CIR BRKR HYD MAG RoHS : Compliant |
| 0 | ||
| BLH406K112C134 | Knowles CDE | Harsh Enviroment DC Link Capacitor - 40uF ±10% - 1100VDC - +105°C - AEC-Q200 - 4 Leads RoHS : Compliant |
| 0 | ||
| TK118A-RT | Thomas & Betts | Steel City® Raintight Compression Coupling - Conduit Size 3 Inch - Material Steel - Zinc-Plated Finish - Concrete Tight RoHS : Compliant |
| 0 | ||
| TMS-SCE-1K-1-1/2-2.0-S1-4 | TE Connectivity | TMS-SCE-1K-1-1/2-2.0-S1-4 MOQ Reduction RoHS : Compliant |
| 0 | ||
| CMLHPK11-1RLS5-36002-200 | Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 2 Pole CML Series | Sensata - Airpax CMLHPK11-1RLS5-36002-200 RoHS : Compliant |
| 0 | ||
| CMLHPK111-1REC5-52-250.-91 | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| CELBXK11REC551F40.0AGR6V | Sensata Circuit Breakers | CIR BRKR HYDMAG RoHS : Compliant |
| 0 | ||
| CELHK11-71165-8-V | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| CELHPK111-1REC5-32759-300 | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| CELK1-1REC4-40203-80-V | Sensata Circuit Breakers | Cir Brkr HydMag RoHS : Compliant |
| 0 | ||
| CELK111-70281-1-V | Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 3 Pole CEL Series | Sensata - Airpax CELK111-70281-1-V RoHS : Compliant |
| 0 | ||
![]() Neutron USA | MK11/M8-1A66B-500W | Standex-Meder Electronics | Proximity Sensors SPST-NO 200V Sensor Thrd w/CBL |
| 50 | |
| 8280K116 | Eaton Corporation | Toggle Switch,SPST,ON-OFF-ON,General Purpose,.500" Actuator,3A,125VAC/DC,Solder RoHS : Not Compliant |
| 50 | ||
| ARK-1123C-S3A3 | Advantech Co Ltd | Compact PC, E3825 1.3GHz, DDR3L, 1xVGA, 2xGbE, 2xCOM, 4xUSB, D1 ADP 62368; Barebone: No memory/storage/OS |
| 31 | ||
| DNFF080BK115 | Hammond Manufacturing | AC Fans Fan and Filter Kit RoHS : Compliant |
| 15 | ||
| CLR-32-20-L-P-A-B-K11-R8 | Festo | Actuator, Clamp, air,linear & swivel left,32x20mm stroke,90 deg,sensor ready,PPS |
| 2 | ||
| ASD31K11NU-203 | IDEC Corporation | Keylock Switches TWND Keyed SS Spring Return R |
| 1 | ||
| NI5-K11K-AN5X/5 1M | TURCK Inc | ProXimity Sensor, 5mm Sensing Distance, 11mm Barrel, NO, NPN, Non-Flush |
| 1 | ||
| AWK-1161C-US-T | Moxa Inc | 802.11ax Wireless Client, 1 10/100/1000BaseT(X) port, US band, -40 to 75°C |
| 1 | ||
| CE3K1-10R-11 | ABB Low Voltage Products and Systems | 30MM KE-REL RED1 NO |
| 0 | ||
| ACT41000EVK1-104 | Qorvo | Power Management IC Development Tools Voltage Regulator for RF Components |
| 0 | ||
| K11YAR-P10XDD0-R000 | ODU Steckverbindungssysteme Gmbh & Co Kg | Circular Push Pull Connectors Straight in-line receptacle with break-away and push-pull locking for bend relief RoHS : Compliant |
| 0 | ||
| NI 5-K11K-AN5X/5 1M | TURCK Inc | ProXimity Sensor;5mm Sensing Distance;11mm Barrel;NO;NPN;Non-Flush |
| 0 | ||
| LSRK110.X | Littelfuse Inc | Industrial & Electrical Fuses 110A 600VAC 300VDC Class RK1 |
| 0 | ||
| 80PK-11 | Fluke Corporation | Type-K Velcro thermocouple probe |
| 0 | ||
| MTP24K11B | Switchcraft Conxall | Patch Panels IDC PANEL 11 WIRED |
| 0 | ||
![]() Pasternack Enterprises US | PE3C100100-2PK1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPM Female to SMA Male Cable 12 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-2PK1-12 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK1-12 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK1-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100100-2PK1-12 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK1-12 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | |
| PE3C100100-2PK1-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPM Female to SMA Male Cable 18 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-2PK1-18 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK1-18 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK1-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100100-2PK1-18 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK1-18 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-8PK1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPM Female to SMA Male Cable 12 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-8PK1-12 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-8PK1-12 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-8PK1-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100100-8PK1-12 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-8PK1-12 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100100-8PK1-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPM Female to SMA Male Cable 18 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-8PK1-18 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-8PK1-18 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-8PK1-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100100-8PK1-18 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-8PK1-18 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-2PK1-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPM Female to 2.92mm Male Cable 18 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-2PK1-18 mini SMP female to right angle 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a right angle 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-2PK1-18 can also be known as a mini SMP jack to right angle 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-2PK1-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to right angle 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100101-2PK1-18 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to right angle 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-2PK1-18 can also be used in the other direction and will be a right angle 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-4PK1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPM Female to 2.92mm Male Cable 12 Inch Length Using PE-P047 Coax, 4 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-4PK1-12 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-4PK1-12 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.63-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-4PK1-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 4-position mini SMP full detent right angle block. This PE3C100101-4PK1-12 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-4PK1-12 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-4PK1-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPM Female to 2.92mm Male Cable 18 Inch Length Using PE-P047 Coax, 4 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-4PK1-18 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-4PK1-18 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.63-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-4PK1-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 4-position mini SMP full detent right angle block. This PE3C100101-4PK1-18 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-4PK1-18 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-8PK1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPM Female to 2.92mm Male Cable 12 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-8PK1-12 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8PK1-12 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8PK1-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100101-8PK1-12 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8PK1-12 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-8PK1-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPM Female to 2.92mm Male Cable 18 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-8PK1-18 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8PK1-18 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8PK1-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100101-8PK1-18 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8PK1-18 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100102-2PK1-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. SMPM Female to 2.92mm Female Cable 18 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100102-2PK1-18 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a Female 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100102-2PK1-18 can also be known as a mini SMP jack to Female 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100102-2PK1-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100102-2PK1-18 mini SMP jack to Female 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100102-2PK1-18 can also be used in the other direction and will be a Female 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to Female 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to Female 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100102-4PK1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPM Female to 2.92mm Female Cable 12 Inch Length Using PE-P047 Coax, 4 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100102-4PK1-12 mini SMP female to 2.92mm female RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on both ends. PE3C100102-4PK1-12 can also be known as a mini SMP jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.63-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100102-4PK1-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm female cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 4-position mini SMP full detent right angle block. This PE3C100102-4PK1-12 mini SMP jack to 2.92mm jack cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100102-4PK1-12 can also be used in the other direction and will be a 2.92mm jack to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100102-8PK1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPM Female to 2.92mm Female Cable 12 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100102-8PK1-12 mini SMP female to 2.92mm female RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on both ends. PE3C100102-8PK1-12 can also be known as a mini SMP jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100102-8PK1-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm female cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100102-8PK1-12 mini SMP jack to 2.92mm jack cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100102-8PK1-12 can also be used in the other direction and will be a 2.92mm jack to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100102-8PK1-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPM Female to 2.92mm Female Cable 18 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100102-8PK1-18 mini SMP female to 2.92mm female RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on both ends. PE3C100102-8PK1-18 can also be known as a mini SMP jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100102-8PK1-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm female cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100102-8PK1-18 mini SMP jack to 2.92mm jack cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100102-8PK1-18 can also be used in the other direction and will be a 2.92mm jack to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100103-2PK1-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPM Female to 1.85mm Male Cable 18 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100103-2PK1-18 mini SMP female to 1.85mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 1.85mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 1.85mm cable connection on the other. Our mini SMP to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100103-2PK1-18 can also be known as a mini SMP jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 1.85mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100103-2PK1-18 RF cable has an FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 1.85mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100103-2PK1-18 mini SMP jack to 1.85mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100103-2PK1-18 can also be used in the other direction and will be a 1.85mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 1.85mm cable assembly for quick shipment worldwide. Variations of mini SMP and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100103-4PK1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPM Female to 1.85mm Male Cable 12 Inch Length Using PE-P047 Coax, 4 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100103-4PK1-12 mini SMP female to 1.85mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 1.85mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 1.85mm cable connection on the other. Our mini SMP to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100103-4PK1-12 can also be known as a mini SMP jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.63-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 1.85mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100103-4PK1-12 RF cable has an FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 1.85mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 4-position mini SMP full detent right angle block. This PE3C100103-4PK1-12 mini SMP jack to 1.85mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100103-4PK1-12 can also be used in the other direction and will be a 1.85mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 1.85mm cable assembly for quick shipment worldwide. Variations of mini SMP and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 1.85mm RF cable assembly as per your requirements. |
| 0 | ||
![]() Venkel Ltd. | SWCR0603-UK-114KT | VENKEL LTD | Surge Withstanding CR;0603;1/3W;�100PPM;110K;�10% RoHS : Compliant | 0 | ||
| SWCR0805-BK-114JT | VENKEL LTD | Surge Withstanding CR;0805;2/5W;�100PPM;110K;�5% RoHS : Compliant | 0 | |||
| SWCR1206-UK-114KT | VENKEL LTD | Surge Withstanding CR;1206;1/3W;�100PPM;110K;�10% RoHS : Compliant | 0 | |||
| SWCR2010-YK-112KT | VENKEL LTD | Surge Withstanding CR;2010;1.25W;�100PPM;1.1K;�10% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-1103BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;110K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-1111BT | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;1.11K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-1111CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;1.11K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-1152DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;11.5K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-1180FT | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;118R;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-11R0CT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;11R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-11R7CT | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;11.7R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-1131BT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;1.13K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-1132FT | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;11.3K;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-1153CT | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;115K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-1153FT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;115K ;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | TVPS00RK-11-98P | Amphenol Corporation | MIL Series Connector, 6 Contact(s), Stainless Steel, Male, Crimp Terminal, Receptacle RoHS : Compliant | 14,903 | ||
UJA1168TK,118![]() | NXP Semiconductors | CAN Transceiver, 1-Trnsvr, PDSO14 RoHS : Compliant | 12,194 | |||
UJA1167TK,118![]() | NXP Semiconductors | CAN Transceiver, 1-Trnsvr, PDSO14 RoHS : Compliant | 11,937 | |||
| YK1110233000G | Amphenol Corporation | Barrier Strip Terminal Block, 20A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 11,609 | |||
| VSC8514XMK-11 | Microchip Technology Inc | Ethernet Transceiver, 4-Trnsvr, PBCC138 RoHS : Compliant | 11,126 | |||
UJA1018TK,118![]() | NXP Semiconductors | Automotive Analog Circuit, PDSO16 RoHS : Compliant | 10,095 | |||
UJA1164TK,118![]() | NXP Semiconductors | CAN Transceiver, 1-Trnsvr, PDSO14 RoHS : Compliant | 9,792 | |||
UJA1161TK,118![]() | NXP Semiconductors | CAN Transceiver, 1-Trnsvr, PDSO14 RoHS : Compliant | 9,668 | |||
UJA1163TK,118![]() | NXP Semiconductors | CAN Transceiver, 1-Trnsvr, PDSO14 RoHS : Compliant | 8,140 | |||
UJA1162TK,118![]() | NXP Semiconductors | CAN Transceiver, 1-Trnsvr, PDSO14 RoHS : Compliant | 5,691 | |||
| TIPK110 | Texas Instruments | Transistor | 3,492 | |||
| Y14535K11000B9L | Vishay Intertechnologies | Fixed Resistor, Metal Foil, 0.6W, 5110ohm, 300V, 0.1% +/-Tol, 0.2ppm/Cel, 3011 RoHS : Compliant | 546 | |||
| TNPW12061K11BECN | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.25W, 1110ohm, 200V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 482 | |||
| TNPW12061K11BHEA | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.25W, 1110ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 256 | |||
| TNPW12061K11BETA | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.25W, 1110ohm, 200V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 197 | |||
![]() Waytek, Inc. | PET BLK 1-1/4" 50' | Techflex Inc | Techflex PTN1.25BK-50 Standard Expandable Sleeving is black 1-1/4" braided polyester sleeving on a 50' spool. It features a 10 mil standard wall, fits recommended bundle sizes from 3/4" to 1-3/4", and is designed to slip over wire harnesses or tubing for abrasion protection and cable bundling. |
| 1,050 | |
![]() Win Source Electronics | TCK112G,LF![]() | Toshiba America Electronic Components | IC POWER DIST LOAD SWITCH WCSP RoHS : Compliant |
| 85,190 | |
| TK110P10PL,RQ(S2 | Toshiba America Electronic Components | 100V 40A 75W 8.9mΩ@10V 1 N-channel N-Channel TO-252-2(DPAK) Single FETs, MOSFETs RoHS |
| 68,000 | ||
| PCA9536TK,118 | Nexperia | IC I/O EXPANDER I2C 4B 8HVSON |
| 35,080 | ||
| LK112SM33 | Nexperia |
| 33,000 | |||
| CRCW04025K11FKED | Vishay Huntington | RES SMD 5.11K OHM 1% 1/16W 0402 |
| 30,000 | ||
| FS32K118LAT0MLF | Nexperia | 32-bit Microcontroller ARM Cortex-M0+ 48MHz 256KB Flash LQFP-48 |
| 25,500 | ||
| TJA1048TK,118 | Nexperia | IC TRANSCEIVER CAN 14HVSON |
| 23,250 | ||
| FS32K116LAT0MFM | Nexperia | 32-bit Microcontroller ARM Cortex-M0+ 48MHz 128KB Flash QFN-32 |
| 10,780 | ||
| PCF8523TK/1,118 | Nexperia | Real Time Clock REAL-TIME CLOCK RTC IC |
| 10,000 | ||
| FS32K116LAT0MFMT | Nexperia | IC MCU 32BIT 128KB FLASH 32HVQFN |
| 10,000 | ||
| FS32K116LAT0MLF | Nexperia | 32-bit Microcontroller ARM Cortex-M0+ 48MHz 128KB Flash LQFP-48 |
| 6,000 | ||
| VSC8514XMK-11 | Microchip Technology Inc | IC TELECOM INTERFACE 138QFN RoHS : Compliant |
| 5,320 | ||
| FS32K116LFT0MFMT | Nexperia | IC MCU 32BIT 128KB FLASH 32HVQFN |
| 2,450 | ||
| SA58631TK,118 | Nexperia | IC AMP AUDIO 3W MONO AB 8HVSON |
| 1,900 | ||
| SA58631TK,115 | Nexperia | IC AMP CLASS AB MONO 3W 8HVSON / Amplifier IC 1-Channel (Mono) Class AB 8-HVSON (4x4) |
| 1,890 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |