| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
C2139NL nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() TME | D2HW-C213MR | Aratas Corporation | Microswitch SNAP ACTION; 0.1A/125VAC; 2A/12VDC; with lever; IP67 |
| 6 | |
| C213 | tasker | Wire; LiY-CY; 6x0.25mm2; shielded,tinned copper braid; PVC; grey |
| 4 | ||
| C21320000000032 | HARTING Technology Group | Cable: for sensors; M12; PIN: 4; M12 male,M12 female angled; plug RoHS : Compliant |
| 2 | ||
| C21320000000069 | HARTING Technology Group | Cable: for sensors; M12; PIN: 4; M12 male,M12 female angled; plug RoHS : Compliant |
| 2 | ||
| C21320000000073 | HARTING Technology Group | Connector: M12; plug; PIN: 4; male; industrial; angled; cables; 5m RoHS : Compliant |
| 1 | ||
| MCT06030C2133DP500 | Vishay Intertechnologies | Resistor: thin film; 213kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| SCC2130-D08-05 | Murata Power Solutions | Sensor: accelerometer; 3÷3.6VDC; SPI; SMD,SMT; -40÷125°C |
| 0 | ||
| MCT06030C2132DP500 | Vishay Intertechnologies | Resistor: thin film; 21.3kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| MCT06030C2133DPW00 | Vishay Intertechnologies | Resistor: thin film; 213kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| D2HW-C213M BY OMR | Aratas Corporation | Microswitch SNAP ACTION; 0.1A/125VAC; 2A/12VDC; with lever; IP67 |
| 0 | ||
| MCT06030C2130DP500 | Vishay Intertechnologies | Resistor: thin film; 213Ω; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| MCT06030C2131DPW00 | Vishay Intertechnologies | Resistor: thin film; 2.13kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| MCT06030C2131DP500 | Vishay Intertechnologies | Resistor: thin film; 2.13kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| MCT06030C2132DPW00 | Vishay Intertechnologies | Resistor: thin film; 21.3kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| C21320000000028 | HARTING Technology Group | Cable: for sensors; M12; PIN: 4; M12 male,M12 female; straight RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | MOC213M | onsemi | Optocoupler, 1 Channel, SOIC, 8 Pins, 60 mA, 2.5 kV, 100 % - Rail/Tube (Alt: MOC213M) RoHS : Compliant |
| 5,265 | |
| MOC213R2M | onsemi | 8-pin SOIC Single-Channel Phototransistor Output Optocoupler. - Tape and Reel (Alt: MOC213R2M) RoHS : Compliant |
| 5,000 | ||
| MIC2133YML-TR | Microchip Technology Inc | DC to DC Controller Single-OUT Synchronous Buck 8V to 75V 32-Pin VQFN T/R - Tape and Reel (Alt: MIC2133YML-TR) RoHS : Not Compliant |
| 50 | ||
| SIT8208AC-21-33E-16.367667X | SiTime Corporation | Silicon Oscillator 16.367667MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT8208AC-21-33E-16.367667X) RoHS : Compliant |
| 0 | ||
| SIT8208AC-21-33E-33.330000T | SiTime Corporation | Silicon Oscillator 33.33MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT8208AC-21-33E-33.330000T) RoHS : Compliant |
| 0 | ||
| SIT8208AC-21-33S-12.000000Y | SiTime Corporation | Silicon Oscillator 12MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT8208AC-21-33S-12.000000Y) RoHS : Compliant |
| 0 | ||
| SIT8208AC-21-33S-25.000000Y | SiTime Corporation | Silicon Oscillator 25MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT8208AC-21-33S-25.000000Y) RoHS : Compliant |
| 0 | ||
| SIT8208AC-21-33S-35.840000T | SiTime Corporation | Silicon Oscillator 35.84MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT8208AC-21-33S-35.840000T) RoHS : Compliant |
| 0 | ||
| SIT8208AC-21-33S-54.000000Y | SiTime Corporation | Silicon Oscillator 54MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT8208AC-21-33S-54.000000Y) RoHS : Compliant |
| 0 | ||
| SIT8208AC-21-33S-66.666660X | SiTime Corporation | Silicon Oscillator 66.66666MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT8208AC-21-33S-66.666660X) RoHS : Compliant |
| 0 | ||
| SIT8209AC-21-33E-133.330000T | SiTime Corporation | Clock Oscillator 133.33MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT8209AC-21-33E-133.330000T) RoHS : Compliant |
| 0 | ||
| SIT8209AC-21-33S-133.000000T | SiTime Corporation | Clock Oscillator 133MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT8209AC-21-33S-133.000000T) RoHS : Compliant |
| 0 | ||
| SIT8209AC-21-33S-133.300000Y | SiTime Corporation | Clock Oscillator 133.3MHz 3.3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT8209AC-21-33S-133.300000Y) RoHS : Compliant |
| 0 | ||
SIT1602BC-21-30E-14.000000D![]() | SiTime Corporation | Silicon Oscillator 14MHz 3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-21-30E-14.000000D) RoHS : Compliant |
| 0 | ||
SIT1602BC-21-30E-27.000000D![]() | SiTime Corporation | Silicon Oscillator 27MHz 3V 15pF 4-Pin QFN T/R - Tape and Reel (Alt: SIT1602BC-21-30E-27.000000D) RoHS : Compliant |
| 0 | ||
![]() Newark | BH12-SC-213 | Hirose Electric Co Ltd | Cir Contact, Power, Skt, 16-14Awg, Crimp; |Hirose/hrs BH12-SC-213 RoHS : Compliant |
| 8,160 | |
| SPC21393 | SPC Multicomp | Connector, Phone Audio, Jack, 3 Position; No. Of Contacts:3Contacts; Gender:Jack; Pin Diameter:6.35Mm; Connector Mounting:Panel Mount; Contact Plating:Tin Plated Contacts; Connector Body Material:-; Product Range:- Rohs Compliant: Yes RoHS : Compliant |
| 545 | ||
| HMC213BMS8E | Analog Devices Inc | Rf Mixer, 1 Channel, 4.5Ghz, Msop-8; |Analog Devices, Inc. HMC213BMS8E RoHS : Compliant |
| 202 | ||
| SPC21305 | SPC Multicomp | Switch, Toggle, Dpdt, 5A, 250V; Switch Operation:(On)-On; Contact Configuration:Dpdt; Illumination:Non Illuminated; Product Range:-; Contact Current Max:5A; Switch Mounting:Panel Mount; Contact Voltage Ac Nom:250V Rohs Compliant: Yes RoHS : Compliant |
| 67 | ||
| OC213DN | Lufkin | Replace, 50, Steel, Anchor, Engr; |Lufkin OC213DN RoHS : Not Compliant |
| 62 | ||
| SPC21327 | SPC Multicomp | Switch, Toggle, Dp3T, 5A, 250V; Switch Operation:On-On-On; Contact Configuration:Dp3T; Illumination:Non Illuminated; Product Range:-; Contact Current Max:5A; Switch Mounting:Panel Mount; Contact Voltage Ac Nom:250V Rohs Compliant: Yes RoHS : Compliant |
| 49 | ||
| TMC2130-TA | Analog Devices Inc | Motor Driver, Stepper, Tqfp-48; |Trinamic/analog Devices TMC2130-TA RoHS : Compliant |
| 36 | ||
| CC213T-5 | L-com Inc | Cbl Assy, Tnc Plug-Plug, 1.52M; |L-Com CC213T-5 RoHS : Compliant |
| 33 | ||
| CC213-5 | L-com Inc | Cable Assy, N Plug-Plug, 5'; |L-Com CC213-5 RoHS : Compliant |
| 32 | ||
| CC213B-15 | L-com Inc | Cbl Assy Rg213 Bnc M/M 15; |L-Com CC213B-15 RoHS : Not Compliant |
| 9 | ||
| SPC21348 | SPC Multicomp | Connector, Rca/Phono, Jack; Available Until Stocks Are Exhausted Alternative Available |Multicomp Pro SPC21348 RoHS : Compliant |
| 8 | ||
| CC213B-25 | L-com Inc | Cbl Assy Rg213 Bnc M/M 25; |L-Com CC213B-25 RoHS : Not Compliant |
| 8 | ||
| DC2132A | Analog Devices Inc | Demonstration Board, Regulator; |Analog Devices, Inc. DC2132A RoHS : Compliant |
| 6 | ||
| LMC213A-MMST-R2 | Black Box Corporation | Fst Eth Med Conv 100-Mbps Cop To 100-Mbp; |Black Box LMC213A-MMST-R2 RoHS : Not Compliant |
| 6 | ||
| CC213-100 | L-com Inc | Rf/Coaxial Cbl Assy, 100 Ft, 30.5M; |L-Com CC213-100 RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | DC2131A | Analog Devices Inc | LTC3623 Demo Board - 15V, ±5A |
| 55 | |
| DC2139A | Analog Devices Inc | LT8610A Demo Board - 5.5V to 4 |
| 28 | ||
| DC213A | Analog Devices Inc | LTC1406CGN - 8-Bit, 20Msps ADC |
| 22 | ||
| DC2132A | Analog Devices Inc | 24V 3A Constant Voltage, Const RoHS : Compliant |
| 19 | ||
| EV1HMC213BMS8 | Analog Devices Inc | Evaluation Board RoHS : Not Compliant |
| 14 | ||
| DC2137A | Analog Devices Inc | 60V, 1.2A Sync Mono Buck Reg w |
| 14 | ||
| DC2134B | Analog Devices Inc | LTC4020EUHF Demo Board - High RoHS : Compliant |
| 11 | ||
| DC2133A | Analog Devices Inc | LTC4079 Demo Board - 2.7V-60Vi RoHS : Compliant |
| 10 | ||
| TMC2130-EVAL-KIT | Analog Devices Inc | Evaluation kit for TMC2130-LA |
| 4 | ||
| HMC213BMS8ETR | Analog Devices Inc | Mixer RoHS : Compliant |
| 2 | ||
| TMC2130-EVAL | Analog Devices Inc | Evaluation board for TMC2130-L |
| 1 | ||
| TMC2130-LA-T | Analog Devices Inc | Stepper Motor Driver IC, SPI, RoHS : Compliant |
| 0 | ||
| DC2135A | Analog Devices Inc | LTC2378-20 and LT1468 Demo - C |
| 0 | ||
| TMC2130-TA | Analog Devices Inc | Stepper Motor Driver IC, SPI, RoHS : Compliant |
| 0 | ||
| TMC2130-LA | Analog Devices Inc | Stepper Motor Driver IC, SPI, RoHS : Compliant |
| 0 | ||
![]() RS | C21320000000007 | HARTING Technology Group | M12 A-COD 5-POL ST /- F /- PVC 5.00M RoHS : Compliant |
| 500 | |
| C21320000000016 | HARTING Technology Group | M12 A-COD 5-POL ST /- F /- PVC 1.00M RoHS : Compliant |
| 48 | ||
| C21320000000003 | HARTING Technology Group | M12 A-COD 4-POL ST /ST M /F PVC 5.00M RoHS : Compliant |
| 30 | ||
| C21320000000021 | HARTING Technology Group | M12 A-COD 5-POL ST /ST M /F PVC 2.00M RoHS : Compliant |
| 26 | ||
| C21320000000070 | HARTING Technology Group | M12 A-COD 4-POL ST /- M /- PUR 1.00M RoHS : Compliant |
| 20 | ||
| C21320000000042 | HARTING Technology Group | M12 A-COD 5-POL ST /- M /- PVC 5.00M RoHS : Compliant |
| 10 | ||
| C21320000000017 | HARTING Technology Group | M12 A-COD 4-POL ST /- F /- PUR 5.00M RoHS : Compliant |
| 10 | ||
| ATQR12 (C213212) | Mersen Electrical Power | FUSE TIME-DELAY CLASS CC 200KA I.R AC/100KA I.R DC 600VAC/300VDC 12A |
| 10 | ||
| A2D3R (C213718) | Mersen Electrical Power | FUSE, TIME DELAY, RK1, VISUAL INDICATOR, 200KA AC/100KA DC, 250VAC/DC, 3A |
| 6 | ||
| CC213T-15 | L-com Inc | RG213 COAXIAL CABLE TNC MALE/MALE 15.0 FT. |
| 5 | ||
| 06F25C2132A3F | Parker Fluid Control Division | SOLENOID VALVE, BCU A1/130 W1/130 L1/130 |
| 2 | ||
| IQC21-30 25PCS | PEPPERL+FUCHS GmbH | IDENT RFID (INDUCTIVE) |
| 2 | ||
| CJ1W-NC213 | OMRON Industrial Automation | 2 AXES, PULSE OPEN COLCTR OUTPT, CJ1W0316G ;CJ1W-NC213 |
| 1 | ||
| 32031T (C213419) | Mersen Electrical Power | FUSE BLOCK, CLASS T, SPRING CONNECTOR,1 POLE,300V,200A, BOX CONNECTOR |
| 1 | ||
| C213 | Apex Tool Group LLC | LUFKIN, 3/8 IN.X50 FT. ANCHOR CHROME CLAD TAPE |
| 0 | ||
![]() Microchip Technology Inc | MIC2130-4YTSE | Microchip Technology Inc | High Voltage 150KHz Synchronous Buck Control, TSSOP, Projected EOL: 2036-04-25 RoHS : Compliant |
| 4,700 | |
| MIC2131-1YTSE | Microchip Technology Inc | High Voltage 150KHz Synchronous Buck Control, TSSOP, Projected EOL: 2035-12-04 RoHS : Compliant |
| 4,606 | ||
| MIC2130-4YTSE-TR | Microchip Technology Inc | High Voltage 150KHz Synchronous Buck Control, TSSOP, Projected EOL: 2036-06-09 RoHS : Compliant |
| 2,497 | ||
| MIC2133YML-TRVAO | Microchip Technology Inc | 75V, Dual Phase COT Switching Buck Controller, VQFN, Projected EOL: 2051-08-01 RoHS : Compliant |
| 246 | ||
| MIC2131-EV | Microchip Technology Inc | MIC2131 Evaluation Board, Projected EOL: |
| 16 | ||
| MIC2130-EV | Microchip Technology Inc | MIC2130 Evaluation Board, Projected EOL: |
| 7 | ||
| TSC 2138 | Microchip Technology Inc | MD LC00076 9-08 BITS INTERFACE, Projected EOL: 2028-01-13 - Contact for Pricing | 0 | |||
| TSC 2135B | Microchip Technology Inc | MD LC03721 10-25 ECL DIST. AMP. WITH LOW SKEW,, Projected EOL: 2035-01-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2131-4YTSE | Microchip Technology Inc | High Voltage 150KHz Synchronous Buck Control, TSSOP, Projected EOL: 2036-04-21 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2130-1YTSE | Microchip Technology Inc | High Voltage Synchronous Buck Control, TSSOP, Projected EOL: 2035-11-21 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2130-1YML-TR | Microchip Technology Inc | High Voltage Synchronous Buck Control, VQFN, Projected EOL: 2036-05-19 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2131-4YML-TR | Microchip Technology Inc | High Voltage 150KHz Synchronous Buck Control, VQFN, Projected EOL: 2036-04-24 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2130-4YML-TR | Microchip Technology Inc | High Voltage 150KHz Synchronous Buck Control, VQFN, Projected EOL: 2036-04-03 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2131-4YTSE-TR | Microchip Technology Inc | High Voltage 150KHz Synchronous Buck Control, TSSOP, Projected EOL: 2036-07-14 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2130-1YTSE-TR | Microchip Technology Inc | High Voltage Synchronous Buck Control, TSSOP, Projected EOL: 2036-07-10 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Rochester Electronics | LPC2134FBD64/01EL | NXP Semiconductors | IC MCU ARM7TDMI-S 16Bit, 32Bit 1 Core FLASH 128kB (128k x 8) 60MHz 64-QFP Tray RoHS : Compliant |
| 800 | |
| CY8C21334W-12PVXE | Infineon Technologies AG | IC MCU M8C 8Bit 1 Core FLASH 8kB (8k x 8) 24MHz 20-SOP Tube RoHS : Compliant |
| 1,836 | ||
| TC213L8F133FACKXUMA1 | Infineon Technologies AG | IC MCU TriCore™ 32Bit 1 Core FLASH 512kB (512k x 8) 133MHz 100-QFP T/R RoHS : Compliant |
| 7,549 | ||
| CY8C21334B-24PVXI | Infineon Technologies AG | IC MCU M8C 8Bit 1 Core FLASH 8kB (8k x 8) 24MHz 20-SOP Tube RoHS : Compliant |
| 2,181 | ||
| CY8C21334-12PVXET | Infineon Technologies AG | IC MCU M8C 8Bit 1 Core FLASH 8kB (8k x 8) 24MHz 20-SOP T/R RoHS : Compliant |
| 8,000 | ||
| CY8C21334-24PVXA | Infineon Technologies AG | IC MCU M8C 8Bit 1 Core FLASH 8kB (8k x 8) 24MHz 20-SOP Tube RoHS : Compliant |
| 51,685 | ||
| TC213L8F133FABKXUMA1 | Infineon Technologies AG | IC MCU TriCore™ 32Bit 1 Core FLASH 512kB (512k x 8) 133MHz 100-QFP T/R RoHS : Compliant |
| 10,031 | ||
| CY8C21312-12PVXET | Infineon Technologies AG | IC MCU M8C 8Bit 1 Core FLASH 8kB (8k x 8) 12MHz 20-SOP T/R RoHS : Compliant |
| 346,000 | ||
| TC213L8F133NACLXUMA1 | Infineon Technologies AG | IC MCU TriCore™ 32Bit 1 Core FLASH 512kB (512k x 8) 133MHz 100-QFP T/R RoHS : Compliant |
| 4,000 | ||
CY8C21334-12PVXE![]() | Cypress Semiconductor | IC MCU M8C 8Bit 1 Core FLASH 8kB (8k x 8) 24MHz 20-SOP Tube RoHS : Compliant |
| 1,452 | ||
CY8C21334-24PVXA![]() | Cypress Semiconductor | IC MCU M8C 8Bit 1 Core FLASH 8kB (8k x 8) 24MHz 20-SOP Tube RoHS : Compliant |
| 1,200 | ||
CY8C21334B-24PVXI![]() | Cypress Semiconductor | IC MCU M8C 8Bit 1 Core FLASH 8kB (8k x 8) 24MHz 20-SOP Tube RoHS : Compliant |
| 120 | ||
| CY8C21334W-12PVXE | Cypress Semiconductor | IC MCU M8C 8Bit 1 Core FLASH 8kB (8k x 8) 24MHz 20-SOP Tube RoHS : Compliant |
| 109 | ||
CY8C21345-24PVXA![]() | Cypress Semiconductor | IC MCU M8C 8Bit 1 Core FLASH 8kB (8k x 8) 24MHz 28-SOP Tube RoHS : Compliant |
| 5,166 | ||
| MIC2131-1YML TR | Micrel Inc | IC VOLT REG Transistor Driver Step-Down Buck 1 OUT 8V - 40V 16-QFN T/R RoHS : Compliant |
| 985 | ||
![]() Sager | RRC2130 | RRC power solutions | Smart Battery Pack, 7.2V, 4.17Ah, 30.02Wh, 2s1p |
| 680 | |
| 55PC2131-16-MST3-9CS2666 | TE Connectivity | TE Connectivity | 0 | |||
| 55PC2131-20-3/6/9-9CS2675 | TE Connectivity | TE Connectivity | 0 | |||
| 55PC2134-24-MST3-96L002 | TE Connectivity | TE Connectivity | 0 | |||
| AP112-1RC-21375-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| AP112-1RC-21375-2 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| D2HW-C213MR | Aratas Corporation | Basic / Snap Action Switches HINGE LEVER LEADS |
| 0 | ||
| NYP2C-21396-15WC1000 | ARATAS Americas | Panel PCs Pnl15,Cel7G,4G,W10,64GSS,ML | 0 | |||
| D2HW-C213M | Aratas Corporation | Basic / Snap Action Switches Subminiature Basic Switch |
| 0 | ||
| 55PC2131-18-2/4/6-9CS2502 | TE Connectivity | Multi-Conductor Cables 55PC2131182469CS2502 PRICE PER FOOT | 0 | |||
| HG9Z-XC213 | IDEC Corporation | LCD Character Display Modules & Accessories Cable for OMRON PLC | 0 | |||
| NYB2C-21391 | ARATAS Americas | Panel PCs Box,Cel7G,4G,Win10,64GSS,RS232 | 0 | |||
| NYP2C-213K1-15WC1000 | ARATAS Americas | Panel PCs Pnl15,Cel7G,4G,W10,128GSS,RS23 | 0 | |||
| NYP2C-213K2-12WC1000 | ARATAS Americas | Panel PCs Pnl12,Cel7G,4G,W10,128GSS,DVI- | 0 | |||
| 55PC2131-22-2/4/6-9 | TE Connectivity | Multi-Conductor Cables 55PC2131-22-2/4/6-9 PRICE PER FOOT RoHS : Compliant | 0 | |||
![]() Ameya Holding Limited | TSC213ICT | STMicroelectronics | RoHS : Compliant | 3,100 | ||
LPC2138FBD64/01,15![]() | NXP Semiconductors | LPC21xx Series 512 kB Flash 32 kB RAM 60 MHz 16/32-Bit Microcontroller - LQFP-64 RoHS : Compliant | 2,060 | |||
LPC2138FBD64,151![]() | NXP Semiconductors | RoHS : Compliant | 800 | |||
| HMC213BMS8ETR | Analog Devices Inc | RoHS : Compliant | 500 | |||
![]() ComSIT USA | SAKTC213L8F133FAB | Infineon Technologies AG | AURIX? 32-bit TriCore? Microcontroller Automotive AEC-Q100 RoHS : Compliant | 24,000 | ||
| RBHAC213B | LG Innotek | Electronic component, likely a sensor or small signal device RoHS : Compliant | 22,347 | |||
| CY8C2133424PVXI | Cypress Semiconductor | PROGRAMMABLE SYSTEM-ON-CHIP Multifunction Peripheral, CMOS, PDSO20 RoHS : Compliant | 33 | |||
![]() Interstate Connecting Components | 55PC2131-18-2/4/6-4CS2 | TE Connectivity | 55PC2131-18-2/4/6-4CS2502 | 0 | ||
| EX40308C213M | Amphenol PCD | EX 403 3 POLE RA PLUG C KEY WI | 0 | |||
| 55PC2131-22-MST3-9CS27 | TE Connectivity | 55PC2131-22-MST3-9CS2743 | 0 | |||
| 55PC2133-16-3/6/9-9CS2951 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCEK6209-000 | 0 | |||
| 801-069-26NF17-85AC213 | Glenair Inc | 0 | ||||
| LJT07C-21-39SB | Amphenol Aerospace | RECEPT 87-539007-39T | 0 | |||
| 55PC2131-18-9/93/96-9 | TE Connectivity | 55PC2131-18-9/93/96-9 RoHS : Compliant | 0 | |||
| 55PC2131-22-MST3-9CS26 | TE Connectivity | 55PC2131-22-MST3-9CS2666 | 0 | |||
| 801-069-26M21-130SC213 | Glenair Inc | RoHS : Compliant | 0 | |||
| LJT06C-21-39P | Amphenol Aerospace | PLUG 87-554177-39P | 0 | |||
| LJT06C-21-39PD | Amphenol Aerospace | PLUG 87-554177-39Y | 0 | |||
| PL155AC-213 | Trompeter |
| 0 | |||
| LJT06C-21-39SA | Amphenol Aerospace | PLUG 87-554177-39F | 0 | |||
| BACC63DC21-35PN | SOURIAU-SUNBANK | RoHS : Compliant | 0 | |||
| 805-061-16M23-130BC213 | Glenair Inc | RoHS : Compliant | 0 | |||
![]() Powell Electronics | 55PC2131-22-MST3-9CS2743 | TE Connectivity | Connectors |
| 21,045 | |
| EC2132-000 | TE Connectivity | Connectors |
| 3,300 | ||
| 55PC2134-24-MST3-9CS2743 | TE Connectivity | Connectors RoHS : Compliant |
| 2,818 | ||
| 55PC2131-20-MST3-9CS2743 | TE Connectivity | Connectors |
| 2,223 | ||
| 55PC2131-16-MST3-9CS2743 | TE Connectivity | Connectors |
| 1,983 | ||
| 55PC2131-24-3/6/9-9CS2675 | TE Connectivity | SPEC55 HOOKUP WIRE PC2131 24AWG |
| 1,330 | ||
| 55PC2136-24-2/4/6-4CS2502 | TE Connectivity | Connectors |
| 1,304 | ||
| EC2-13 | Samtec Inc | Connector RoHS : Compliant |
| 689 | ||
| 55PC2131-22-2/4/6-9 | TE Connectivity | Connectors RoHS : Compliant |
| 543 | ||
| 55PC2131-18-2/4/6-4CS2502 | TE Connectivity | Connectors |
| 280 | ||
| 55PC2134-24-9/93/96-9 | TE Connectivity | SPEC55 HOOKUP WIRE PC2134 24AWG RoHS : Compliant |
| 41 | ||
![]() Chip 1 Exchange | RC2139K5% | Philips Semiconductors | INSTOCK | 275,000 | ||
| RC2139R5% | Philips Semiconductors | INSTOCK | 207,856 | |||
| RC2133K5% | Philips Semiconductors | INSTOCK | 105,000 | |||
| RC21 3M3 5% | Philips Semiconductors | INSTOCK | 60,000 | |||
| RC21 30K 5% | Philips Semiconductors | INSTOCK | 60,000 | |||
| RC213R35% | INSTOCK | 40,000 | ||||
| BC213143A17-RK-E4 | CSR plc | INSTOCK | 36,000 | |||
| BC213143A-17-RK-E4 | INSTOCK | 36,000 | ||||
| RC21390K5 | Philips Semiconductors | INSTOCK | 9,746 | |||
| HMC213MS8TR | INSTOCK | 461 | ||||
| YKC21-3899 | INSTOCK | 300 | ||||
LPC2132FBD64/01![]() | NXP Semiconductors | INSTOCK RoHS : Compliant | 240 | |||
| HMC213MS | Hittite Microwave Corp | INSTOCK | 150 | |||
| YKC21-3394N | INSTOCK | 102 | ||||
| BL-C2132 | INSTOCK | 11 | ||||
![]() Avnet Abacus | PL75C-213 | Bel Fuse | TRB PLUG STRAIGHT TOOL CRIMP 3 LUG F (Alt: PL75C-213) RoHS : Not Compliant | 0 | ||
| D2HWC213M | Aratas Corporation | (Alt: D2HWC213M) RoHS : Compliant | 0 | |||
| D2HWC213MR | Aratas Corporation | Switch Snap Action NO SPST Hinge Lever Wire Lead 2A 125VAC 42VDC 075N Screw Mount (Alt: D2HWC213MR) RoHS : Compliant | 0 | |||
| CC2132-000 | TE Connectivity | Cable Accessories Marker Sleeve CrossLinked Polyolefin Yellow TR (Alt: CC2132-000) RoHS : Compliant | 0 | |||
| CC2132-000 | TE Connectivity | Cable Accessories Marker Sleeve CrossLinked Polyolefin Yellow TR (Alt: CC2132-000) RoHS : Compliant | 0 | |||
| C21303-000 | TE Connectivity | HM50825458A (Alt: C21303-000) RoHS : Compliant | 0 | |||
| BH12-SC-213 | Hirose Electric Co Ltd | (Alt: CL0140-0014-0-00) RoHS : Compliant | 0 | |||
| EM52M-PC2-132 | Hirose Electric Co Ltd | (Alt: CL0138-0006-0-00) RoHS : Compliant | 0 | |||
SCC2130-D08-05![]() | Murata Manufacturing Co Ltd | (Alt: SCC2130-D08-05) RoHS : Compliant | 0 | |||
| R79IC2133AA45G | KEMET Corporation | Film Capacitor 00133 uF 160 V 250 V 2 Metallized PP Radial Box 2 Pin (Alt: R79IC2133AA45G) RoHS : Compliant | 0 | |||
| HR10-PC-213(71) | Hirose Electric Co Ltd | (Alt: CL0110-0520-6-71) RoHS : Compliant | 0 | |||
| EV1-SC2-132(03) | Hirose Electric Co Ltd | (Alt: CL0139-0012-7-03) RoHS : Compliant | 0 | |||
| SCC2130-D08-004 | Murata Manufacturing Co Ltd | (Alt: SCC2130-D08-004) RoHS : Compliant | 0 | |||
![]() Avnet Asia | RRC2130 | RRC power solutions | Lithium Ion Battery pack RRC2130 7.6V / 3.88Ah / 29.5Wh RRC2130 (Alt: RRC2130) RoHS : Compliant | 0 | ||
| MOC213R2M | onsemi | 8-pin SOIC Single-Channel Phototransistor Output Optocoupler. (Alt: MOC213R2M) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LPC2138FBD64/01EL | NXP Semiconductors | ARM MCU LPC Family LPC2000 Series Microcontrollers ARM7TDMIS 16 bit 32 bit 60 MHz 512 KB (Alt: LPC2138FBD64/01EL) RoHS : Compliant | 4,000 | ||
| MOC213M | onsemi | Optocoupler 1 Channel SOIC 8 Pins 60 mA 25 kV 100 (Alt: MOC213M) RoHS : Compliant | 0 | |||
| TSC213ICT | STMicroelectronics | ZeroDrift Current Sense Amplifier BiDirection 50VV 27V to 26V 6Pin SC70 TR (Alt: TSC213ICT) RoHS : Compliant | 0 | |||
| MIC2130-4YTSE | Microchip Technology Inc | HIGH VOLTAGE 150KHZ SYNCHRONOUS BUCK CONTROL (Alt: MIC2130-4YTSE) RoHS : Compliant | 0 | |||
| MIC2133YML-TR | Microchip Technology Inc | DC to DC Controller SingleOUT Synchronous Buck 8V to 75V 32Pin VQFN TR (Alt: MIC2133YML-TR) RoHS : Compliant | 0 | |||
| MIC2131-4YTSE | Microchip Technology Inc | HIGH VOLTAGE 150KHZ SYNCHRONOUS BUCK CONTROL (Alt: MIC2131-4YTSE) RoHS : Compliant | 0 | |||
| MIC2130-4YTSE-TR | Microchip Technology Inc | HIGH VOLTAGE 150KHZ SYNCHRONOUS BUCK CONTROL (Alt: MIC2130-4YTSE-TR) RoHS : Compliant | 0 | |||
| LPC2134FBD64/01EL | NXP Semiconductors | (Alt: LPC2134FBD64/01EL) RoHS : Compliant | 0 | |||
| LPC2136FBD64/01EL | NXP Semiconductors | MCU 1632Bit LPC2136 ARM7TDMI RISC 256KB Flash 32KB SRAM 64Pin LQFP TR (Alt: LPC2136FBD64/01EL) RoHS : Compliant | 0 | |||
| LPC2134FBD64/01,118 | NXP Semiconductors | MCU 16bit32bit LPC2000 ARM7TDMIS RISC 128KB Flash 33V 64Pin LQFP TR (Alt: LPC2134FBD64/01,11) RoHS : Compliant | 0 | |||
| LPC2131FBD64/01,151 | NXP Semiconductors | MCU 16bit32bit LPC2000 ARM7TDMIS RISC 32KB Flash 33V 64Pin LQFP Tray (Alt: LPC2131FBD64/01,15) RoHS : Compliant | 0 | |||
| C213GYST-015MC137-UFL_CU008851 | 2J USA | SMAFemaleRPBHGold Yellow Shrink Tube 15cm MicroCoax 137mm UFL (Alt: SI374102332) RoHS : Compliant | 0 | |||
| C213GST-100MC137B-MHF4L_CU013161 | 2J USA | SMAFemaleRPBHGold Shrink Tube 100cm MicroCoax 137mm Black MHF4L (Alt: SI374102957) RoHS : Compliant | 0 | |||
| C213GST-050MC137B-MHF4L_CU013161 | 2J USA | SMAFemaleRPBHGold Shrink Tube 50cm MicroCoax 137mm Black MHF4L (Alt: SI374102956) RoHS : Compliant | 0 | |||
| C213GST-100MC137B-C603GST_CU013161 | 2J USA | SMAFemaleRPBHGold Shrink Tube 100cm MicroCoax 137mm Black SMAMaleRPGold Shrink Tube (Alt: SI374102958) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | RC21-33R-5% | Philips Semiconductors | IN STOCK SHIP TODAY |
| 5,000 | |
| RC21-33R-5% | YAGEO Corporation | IN STOCK SHIP TODAY |
| 5,000 | ||
| RC21-30K-5% | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4,800 | ||
| WSC-2-13.8R-1% | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 3,595 | ||
CY8C21323-24LFXI![]() | Cypress Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 175 | ||
| HMC213MS8ETR | Hittite Microwave Corp | IN STOCK SHIP TODAY RoHS : Compliant | 10 | |||
| LPC2138FBD64/01-15 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4 | ||
![]() DB Roberts | PC21-3000 | Shercon Inc | GRN TAPE (400F) 3 X 72 YDS 12/CASE |
| 265 | |
| C2132-C12P | Accuride International |
| 226 | |||
| C2132-C10P | Accuride International |
| 110 | |||
| PC21-3500 | Shercon Inc | GRN TAPE (400F) 3-1/2 X 72 YDS 8/CASE |
| 67 | ||
| C2132-C16D | Accuride International |
| 4 | |||
| C21306 | PennEngineering (PEM) | 0 | ||||
| PC21-3000UN | Shercon Inc | PC21-3000UN 3 X 72 YARDS GREEN | 0 | |||
| C21306-R | PennEngineering (PEM) | 0 | ||||
![]() EBV Elektronik | LPC2138FBD64/01,118 | NXP Semiconductors | MCU 16bit32bit LPC2000 ARM7TDMIS RISC 512KB Flash 33V 64Pin LQFP TR (Alt: LPC2138FBD64/01,11) RoHS : Compliant | 4,500 | ||
| LPC2134FBD64/01EL | NXP Semiconductors | (Alt: LPC2134FBD64/01EL) RoHS : Compliant | 4,000 | |||
| LPC2138FBD64/01EL | NXP Semiconductors | ARM MCU LPC Family LPC2000 Series Microcontrollers ARM7TDMIS 16 bit 32 bit 60 MHz 512 KB (Alt: LPC2138FBD64/01EL) RoHS : Compliant | 3,200 | |||
| MOC213M | onsemi | Optocoupler 1 Channel SOIC 8 Pins 60 mA 25 kV 100 (Alt: MOC213M) RoHS : Compliant | 0 | |||
| TSC213ICT | STMicroelectronics | ZeroDrift Current Sense Amplifier BiDirection 50VV 27V to 26V 6Pin SC70 TR (Alt: TSC213ICT) RoHS : Compliant | 0 | |||
| MIC2133YML-TR | Microchip Technology Inc | DC to DC Controller SingleOUT Synchronous Buck 8V to 75V 32Pin VQFN TR (Alt: MIC2133YML-TR) RoHS : Compliant | 0 | |||
| CY8C21334B-24PVXI | Infineon Technologies AG | MPU PSoC CISC 8Bit 24MHz 20Pin SSOP Tube (Alt: SP005649205) RoHS : Compliant | 0 | |||
| CY8C21334-24PVXIT | Infineon Technologies AG | PSoC MixedSignal Array 20Pin SSOP TR (Alt: SP005649203) RoHS : Compliant | 0 | |||
| LPC2136FBD64/01EL | NXP Semiconductors | MCU 1632Bit LPC2136 ARM7TDMI RISC 256KB Flash 32KB SRAM 64Pin LQFP TR (Alt: LPC2136FBD64/01EL) RoHS : Compliant | 0 | |||
LPC2134FBD64/01,11![]() | NXP Semiconductors | MCU 16bit32bit LPC2000 ARM7TDMIS RISC 128KB Flash 33V 64Pin LQFP TR (Alt: LPC2134FBD64/01,11) RoHS : Compliant | 0 | |||
LPC2132FBD64/01,11![]() | NXP Semiconductors | MCU 16bit32bit LPC2000 ARM7TDMIS RISC 64KB Flash 33V 64Pin LQFP TR (Alt: LPC2132FBD64/01,11) RoHS : Compliant | 0 | |||
| TC213L8F133FACKXUMA1 | Infineon Technologies AG | (Alt: SP001658222) RoHS : Compliant | 0 | |||
| TC213L8F133FABKXUMA1 | Infineon Technologies AG | MCU 32Bit AURIX TriCore RISC 512KB Flash 33V 100Pin TQFP EP TR (Alt: SP001268338) RoHS : Compliant | 0 | |||
| TC213L8F133NACLXUMA1 | Infineon Technologies AG | 32 BIT AURIX (Alt: SP001658228) RoHS : Compliant | 0 | |||
| TC213S8F133FABKXUMA1 | Infineon Technologies AG | MCU 32Bit AURIX TriCore RISC 512KB Flash 33V 100Pin TQFP EP TR (Alt: SP001240244) RoHS : Compliant | 0 | |||
![]() Flip Electronics | LPC2132FBD64/01,15![]() | NXP Semiconductors | Stock RoHS : Compliant | 54,260 | ||
| CY8C21334-24PVXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 10,405 | ||
| MOC213R2M | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,450 | ||
| CY8C21334B-24PVXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 718 | ||
LPC2138FBD64/01![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 709 | ||
| LPC2138FBD64/H100 | NXP Semiconductors | Stock, Ship Today |
| 640 | ||
| CY8C21345-24SXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 545 | ||
LPC2131FBD64/01![]() | NXP Semiconductors | Stock RoHS : Compliant | 320 | |||
LPC2132FBD64/01![]() | NXP Semiconductors | Stock RoHS : Compliant | 320 | |||
| LPC2132FBD64/01EL | NXP Semiconductors | Stock RoHS : Compliant | 320 | |||
LPC2132FBD64![]() | NXP Semiconductors | Stock RoHS : Compliant | 320 | |||
LPC2136FBD64/01,15![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 227 | ||
LPC2138FBD64/01,15![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 178 | ||
LPC2131FBD64/01,15![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 160 | ||
LPC2138FBD64/01,11![]() | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 3 | ||
![]() Master Electronics | 55PC2131-20-2/4/6-9CS2970 | TE Connectivity | Multi-Conductor Cables 55PC2131-20-2/4/6-9CS2970 MOQ Reduction RoHS : Compliant |
| 0 | |
| 55PC2133-16-3/6/9-9CS2951 | TE Connectivity | 55PC2133-16-3/6/9-9CS2951 MOQ Reduction RoHS : Compliant |
| 0 | ||
| NYB2C213K6 | OMRON Industrial Automation | BOX CEL7G 4G WIN10 128GSS RoHS : Compliant |
| 0 | ||
| MIC2130-1YML-TR | Microchip Technology Inc | High Voltage Synchronous Buck Control RoHS : Compliant |
| 0 | ||
| 55PC2131-18-9/93/96-9 | TE Connectivity | 55PC2131-18-9/93/96-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| NYB1C213K2 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| NYP1C2139612WC1000 | OMRON Industrial Automation | PNL12 CEL 4G W10 64GSS ML RoHS : Compliant |
| 0 | ||
| NYB2C213C6 | OMRON Industrial Automation | BOX CEL7G 4G WIN10 320GHD RoHS : Compliant |
| 0 | ||
| 55PC2131-18-2/4/6-9CS2502 | TE Connectivity | 55PC2131-18-2/4/6-9CS2502 MOQ Reduction RoHS : Compliant |
| 0 | ||
| NYP1C2139115WC1000 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| NYP1C213C115WC1000 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| HG9Z-XC213 | IDEC Corporation | Cable For Omron PLC RoHS : Compliant |
| 0 | ||
| NYP2C213C215WC1000 | OMRON Industrial Automation | PNL15 CEL7G 4G W10 320GHD RoHS : Compliant |
| 0 | ||
| NYP2C213K615WC1000 | OMRON Industrial Automation | PNL15 CEL7G 4G W10 128GSS RoHS : Compliant |
| 0 | ||
| NYB2C213K2 | OMRON Industrial Automation | BOX CEL7G 4G WIN10 128GSS RoHS : Compliant |
| 0 | ||
![]() Neutron USA | C21320000000007 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 A-cod 5-pol st /- f /- PVC 5.00m RoHS : Compliant |
| 50 | |
| C21320000000015 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 A-cod 5-pol an /- f /- PVC 1.00m RoHS : Compliant |
| 50 | ||
| C21320000000013 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 A-cod 5-pol st /st m /f PVC 1.00m RoHS : Compliant |
| 39 | ||
| C21320000000003 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 A-cod 4-pol st /st m /f PVC 5.00m RoHS : Compliant |
| 36 | ||
| HC213/PS/UV/K | Hatch Lighting | LED Lighting Fixture Accessories 2X 13 CFL PGM START KIT |
| 20 | ||
| C21320000000006 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 A-cod 5-pol an /- f /- PVC 5.00m RoHS : Compliant |
| 10 | ||
| C21320000000038 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 A-cod 4-pol st /- f /- PUR 2.00m RoHS : Compliant |
| 7 | ||
| TMC2130-EVAL | Analog Devices Inc | Power Management IC Development Tools Silent stepper motor driver 5 to 46V, up to 1.2A with S/D and SPI Interface, 256 Steps, CoolStep, StallGuard and StealthChop |
| 6 | ||
| C21320000000075 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 A-cod 4-pol st /st m /f PVC 2.00m RoHS : Compliant |
| 6 | ||
| 82-665C.2134 | EAO AG | Pushbutton Switches Illuminated pushbutton.maintained.22mm.stainless steel SUS 316L.flush/flat.ring illumination Tritan.green 24VDC.Ag.Cable 200mm without Connector.Cable outlet 90 |
| 5 | ||
| 2641LP/2C21308L220V3 | APEM Inc | Rocker Switch DPST 16A (AC), 15A (DC) 125 V Panel Mount, Snap-In |
| 5 | ||
| C21320000000042 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 A-cod 5-pol st /- m /- PVC 5.00m RoHS : Compliant |
| 5 | ||
| XMPE12C2131 | Telemechanique Sensors | Industrial Pressure Sensors PRESSURE SWITCH XMP |
| 1 | ||
| RAMEC2133DDR4-16G-AX | Axiom Manufacturing | AXIOM 16GB DDR4-2133 ECC UDIMM FOR SYNOLOGY - RAMEC2133DDR4-16G - DDR4 - 16GB - |
| 0 | ||
| TMC2130-EVAL-KIT | Analog Devices Inc | Power Management IC Development Tools Silent stepper motor driver 5 to 46V, up to 1.2A with S/D and SPI Interface, 256 Steps, CoolStep, StallGuard and StealthChop |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2139LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2139LF/HS can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C2139LF/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable using LMR-100 coax with heatshrink, LF solder. | 0 | ||
| PE3C2139/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2139/HS-36 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2139/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2139/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2139/HS2 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C2139/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2139/HS-48 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2139/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2139/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2139 | Pasternack Enterprises | 0 | ||||
| PE3C2139/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. BNC Male to BNC Male Low Loss Cable 100 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2139/HS-100CM can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2139/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2139/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2137 | Pasternack Enterprises | 0 | ||||
| PE3C2139LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using LMR-100 Coax, LF Solder, RoHS. PE3C2139LF is a BNC male to BNC male cable using LMR-100A coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2139LF BNC male to BNC male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C2137/HS | Pasternack Enterprises | 0 | ||||
| PE3C2135 | Pasternack Enterprises | 0 | ||||
| PE3C2139/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2139/HS can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2139/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2139/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C2139/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male to BNC Male Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2139/HS-200CM can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2139/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2139/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2132 | Pasternack Enterprises | 0 | ||||
| PE3C2136 | Pasternack Enterprises | 0 | ||||
| PE3C2139/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2139/HS-24 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2139/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2139/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Venkel Ltd. | TFCR0402-16W-C-2132BT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;21.3K;�0.1% RoHS : Compliant | 0 | ||
| TFCR1206-4W-C-2133CT | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;213K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-2131BT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;2.13K;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-2134DT | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;2.13M;�0.5% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-2132FT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;21.3K;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-2133DT | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;213K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-2131FT | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;2.13K;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-2133CT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;213K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-2133BT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;213K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-2130FT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;213R;�1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-2131BT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;2.13K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-2130CT | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;213R;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-2131CT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;2.13K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-2133CT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;213K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-2134FT | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;2.13M;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | TSC213IYQT | STMicroelectronics | Operational Amplifier, 1 Func, 100uV Offset-Max RoHS : Compliant | 11,800 | ||
| TC213L8F133NACKXUMA1 | Infineon Technologies AG | Microcontroller, 32-Bit, FLASH, 133MHz, CMOS, PQFP100 RoHS : Compliant | 11,489 | |||
| TC213L8F133NACLXUMA1 | Infineon Technologies AG | Microcontroller, 32-Bit, FLASH, 133MHz, CMOS, PQFP100 RoHS : Compliant | 10,707 | |||
TC213-40![]() | Texas Instruments | Analog Circuit, CDIP24 RoHS : Not Compliant | 9,499 | |||
| TC213-50 | Texas Instruments | Image Sensor, 512 Horiz pixels, 1000 Vert pixels, Through Hole Mount RoHS : Not Compliant | 9,199 | |||
| TSC213ICT | STMicroelectronics | RoHS : Compliant | 8,575 | |||
| TMC2130-EVAL | Analog Devices Inc | 8,226 | ||||
TC213-30![]() | Texas Instruments | Analog Circuit, CDIP24 RoHS : Not Compliant | 7,405 | |||
LPC2131FBD64,151![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, ARM7 CPU, 60MHz, CMOS, PQFP64 RoHS : Compliant | 6,560 | |||
UCC21320QDWKQ1![]() | Texas Instruments | Half Bridge Based IGBT/MOSFET Driver, PDSO14 RoHS : Compliant | 6,179 | |||
LPC2131FBD64/01,11![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, ARM7 CPU, 60MHz, CMOS, PQFP64 RoHS : Compliant | 5,153 | |||
| TMC2130-EVAL-KIT | Analog Devices Inc | 5,038 | ||||
| TSC213IQT | STMicroelectronics | RoHS : Compliant | 4,259 | |||
| TSC213IYCT | STMicroelectronics | RoHS : Compliant | 3,854 | |||
TC213![]() | Texas Instruments | Analog Circuit, 1 Func, CDIP24 RoHS : Not Compliant | 3,594 | |||
![]() Win Source Electronics | SAK-TC213L-8F133N AC | Infineon Technologies AG | TQFP-100(12x12) Microcontrollers RoHS |
| 19,200 | |
| HMC213AMS8E | Analog Devices Inc | IC MIXER 1.5-4.5GHZ 8MSOP RoHS : Compliant |
| 17,014 | ||
| LPC2134FBD64/01,15 | Nexperia | IC MCU 32BIT 128KB FLASH 64LQFP |
| 8,000 | ||
| LPC2132FBD64/01,11 | Nexperia | IC MCU 16/32BIT 64KB FLSH 64LQFP / ARM7® LPC2100 Microcontroller IC 16/32-Bit 60MHz 64KB (64K x 8) FLASH 64-LQFP (10x10) |
| 7,850 | ||
| LPC2138FBD64/01 | Nexperia | IC MCU 32BIT 512KB FLASH 64LQFP |
| 6,000 | ||
| TMC2130-TA | Analog Devices Inc | STEPPER MOTOR DRIVER IC, SPI, ST RoHS : Compliant |
| 5,714 | ||
| LPC2134FBD64/01 | Nexperia | Single-chip 16/32-bit microcontrollers; 32/64/128/256/512 kB ISP/IAP flash with 10-bit ADC and DAC |
| 5,590 | ||
| LPC2138FBD64/01,15 | Nexperia | ARM Microcontrollers - MCU ARM7 512KF/32KR/ADC |
| 5,450 | ||
| LPC2138FBD64/01EL | Nexperia | IC MCU 16/32B 512KB FLASH 64LQFP / ARM7® series Microcontroller IC 16/32-Bit 60MHz 512KB (512K x 8) FLASH 64-LQFP (10x10) |
| 5,420 | ||
| LPC2136FBD64/01 | Nexperia |
| 3,200 | |||
| LPC2136FBD64/01,15 | Nexperia | ARM Microcontrollers - MCU ARM7 256KF/32KR/ADC |
| 3,010 | ||
| LPC2136FBD64/01EL | Nexperia | IC MCU 16/32B 256KB FLASH 64LQFP |
| 2,800 | ||
| LPC2132FBD64/01EL | Nexperia | IC MCU 16/32BIT 64KB FLSH 64LQFP / ARM7® series Microcontroller IC 16/32-Bit 60MHz 64KB (64K x 8) FLASH 64-LQFP (10x10) |
| 1,900 | ||
| HMC213BMS8ETR | Analog Devices Inc | MIXER RoHS : Compliant |
| 1,840 | ||
| HMC213MS8 | Hittite Microwave Corp | GaAs MMIC SMT DOUBLE BALANCED MIXER, 1.5 - 4.5 GHz RoHS : Not Compliant |
| 779 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |