| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
C208-DS01-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | CBR04C208A3GAC![]() | KEMET Corporation | CAP CER 0.2PF 25V C0G/NP0 0402 RoHS : Compliant |
| 16,451 | |
CBR04C208A3GAC![]() | KEMET Corporation | CAP CER 0.2PF 25V C0G/NP0 0402 RoHS : Compliant |
| 16,451 | ||
CBR04C208A3GAC![]() | KEMET Corporation | CAP CER 0.2PF 25V C0G/NP0 0402 RoHS : Compliant |
| 10,000 | ||
EPF8636ARC208-3![]() | Rochester Electronics LLC | LOADABLE PLD, CMOS, PQFP208 RoHS : Not Compliant |
| 5,096 | ||
| MC2-0805Y684M500BF3 | Lumimax Optoelectronic Technology | CAP CER 0.68UF 50V Y5V RADIAL |
| 2,600 | ||
| D2553WVC-208-P0BKG1 | Ease Electronics Co Ltd | CONN RCPT 8POS IDC 28AWG GOLD |
| 1,000 | ||
| CC2080 | Transforming Technologies | DUAL LINE COIL CORD, 6' |
| 749 | ||
| EPF10K100EQC208-2 | Rochester Electronics LLC | IC FPGA 147 I/O 208QFP |
| 345 | ||
| EPF8636AQC208-3 | Rochester Electronics LLC | IC FPGA 136 I/O 208QFP |
| 315 | ||
EP20K200RC208-3V![]() | Rochester Electronics LLC | IC FPGA 144 I/O 208RQFP RoHS : Not Compliant |
| 89 | ||
| AZ2280-1C-208AEF | American ZETTLER Inc | RELAY GEN PURPOSE SPDT 20A 208V RoHS : Compliant |
| 73 | ||
| MRLC20-8-4-A | Ruland Manufacturing Co Inc | 8 MMX4 MM SLIT COUPLING |
| 57 | ||
EP20K30EQC208-2![]() | Rochester Electronics LLC | LOADABLE PLD, 2.69NS PQFP208 RoHS : Not Compliant |
| 39 | ||
ATS-21C-208-C2-R0![]() | Advanced Thermal Solutions Inc | HEATSINK 70X70X6MM XCUT T766 RoHS : Compliant |
| 25 | ||
| ATS-TEC20-84-054 | Advanced Thermal Solutions Inc | TEC Module 20x20x4.2mm RoHS : Compliant |
| 10 | ||
![]() Avnet Americas | DALC208SC6 | STMicroelectronics | ESD Protection Device, Array, SOT-23, 6 Pins, 1.2 V, DALC2 - Tape and Reel (Alt: DALC208SC6) RoHS : Compliant |
| 441,000 | |
| HLMP-C208-S0000 | Broadcom Limited | - Bulk (Alt: HLMP-C208-S0000) RoHS : Compliant |
| 7,000 | ||
| PI6C20800SAEX | Diodes Incorporated | Clock Buffer, PCIe Fanout, 95 MHz to 400 MHz, 8 Outputs, 3.135 V to 3.465 V, 48 Pins, TSSOP - Tape and Reel (Alt: PI6C20800SAEX) RoHS : Compliant |
| 1,500 | ||
| AT-5030-TF-3-LWC208-R | PUI Audio | - Boxed Product (Development Kits) (Alt: AT-5030-TF-3-LWC208-R) RoHS : Not Compliant | 435 | |||
| NK-2C2-085-125-TH00 | Molex | I/O Connector, Plug, Nano-D Subminiature Connector, 85 Contacts, Gold, Beryllium Copper, Right Angle - Tape and Reel (Alt: NK-2C2-085-125-TH00) RoHS : Not Compliant |
| 10 | ||
CBR02C208A3GAC![]() | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.2 pF, 25 V, 0201 [0603 Metric], ? 0.05pF, C0G / NP0 - Tape and Reel (Alt: CBR02C208A3GAC) RoHS : Compliant |
| 0 | ||
| PT03C-20-8P(025) | Amphenol Corporation | Circular Connector, MIL-DTL-26482 Series I, Wall Mount Receptacle, Solder Pin, Bayonet, Gold - Bulk (Alt: PT03C-20-8P(025)) RoHS : Not Compliant |
| 0 | ||
| RN60C2084BB14 | Vishay Intertechnologies | Through Hole Resistor, 2.08 Mohm, RN Series, 125 mW, ? 0.1%, Axial Leaded, 300 V, Metal Film - Bulk (Alt: RN60C2084BB14) RoHS : Not Compliant |
| 0 | ||
| 801-069-26ZNU13-37BC208 | Glenair Inc | Circular Connector, Mighty Mouse 801 Series, Right Angle Plug, 37 Contacts - Bulk (Alt: 801-069-26ZNU13-37BC208) RoHS : Not Compliant |
| 0 | ||
| 801-069-26ZNU19-100AC208 | Glenair Inc | Circular Connector, Mighty Mouse 801 Series, Right Angle Plug, 100 Contacts - Bulk (Alt: 801-069-26ZNU19-100AC208) RoHS : Not Compliant |
| 0 | ||
| MBB02070C2081DC100 | Vishay Intertechnologies | Resistor Professional Metal Film 2.08k Ohm 0.5% 2/5W ?50ppm/K Ceramic Axial T/R - Ammo Pack (Alt: MBB02070C2081DC100) RoHS : Compliant |
| 0 | ||
| 805-061-16ZNU13-31BC208 | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY MOUSE - Bulk (Alt: 805-061-16ZNU13-31BC208) RoHS : Not Compliant |
| 0 | ||
| SP02C-20-8P(003) | Amphenol Corporation | - Bulk (Alt: SP02C-20-8P(003)) RoHS : Not Compliant |
| 0 | ||
| RNR55C2080BRBSL | Vishay Intertechnologies | Through Hole Resistor, 208 ohm, HDN RNR Series, 100 mW, ? 0.1%, Axial Leaded, 200 V, Metal Film - Bulk (Alt: RNR55C2080BRBSL) RoHS : Not Compliant |
| 0 | ||
| RNR60C2081DSM761 | Vishay Intertechnologies | Through Hole Resistor, 2.08 kohm, HDN RNR Series, 125 mW, ? 0.5%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RNR60C2081DSM761) RoHS : Not Compliant |
| 0 | ||
![]() Newark | CBR02C208B5GAC![]() | KEMET Corporation | CAP, 0.2PF, 50V, 0201; RoHS : Compliant |
| 22,047 | |
CBR02C208B5GAC![]() | KEMET Corporation | CAP, 0.2PF, 50V, 0201; RoHS : Compliant |
| 22,047 | ||
| CBR04C208B5GACAUTO | KEMET Corporation | CAP MLCC SMD, 0.2PF, 50V, C0G / NP0; RoHS : Compliant |
| 9,980 | ||
| CBR04C208B5GACAUTO | KEMET Corporation | CAP MLCC SMD, 0.2PF, 50V, C0G / NP0; RoHS : Compliant |
| 9,980 | ||
| CBR04C208B5GACAUTO | KEMET Corporation | RF CAPACITOR, 0.2PF, 50V, 125DEG C, 0402; RoHS : Compliant |
| 9,707 | ||
| MC20803A6W-GPR | Midas Displays | LCD DISP ALPHAN 8 X 2 BLACK ON GREY 5V; RoHS : Compliant |
| 893 | ||
| MC20805B6W-FPTLW-V2 | Midas Displays | DISPLAY, ALPHANUMERIC, 8X2, WHITE; RoHS : Compliant |
| 411 | ||
| SC2083 | Fairview Microwave Inc | CONNECTOR ACCESSORY; RoHS : Compliant |
| 329 | ||
| MC20805A12W-VNMLW | Midas Displays | LCD, ALPHA-NUM, 8 X 2, WHITE; RoHS : Compliant |
| 176 | ||
| MC20805A6W-BNMLWI-V2 | Midas Displays | DISPLAY, ALPHANUMERIC, 8X2, WHITE; RoHS : Compliant |
| 56 | ||
| MC20805A6W-GPTLY-V2 | Midas Displays | DISPLAY, ALPHANUMERIC, 8X2, YELLOW/GRN; RoHS : Compliant |
| 49 | ||
| SC2087 | Fairview Microwave Inc | CONNECTOR ACCESSORY; RoHS : Compliant |
| 35 | ||
CBR04C208A5GAC![]() | KEMET Corporation | CAP, 0.2PF, 50V, 0402; RoHS : Compliant |
| 8 | ||
CBR04C208A5GAC![]() | KEMET Corporation | CAP, 0.2PF, 50V, 0402; RoHS : Compliant |
| 8 | ||
| SPC20859 | SPC Multicomp | COAXIAL CABLE, 12IN, BLACK; CONNECTOR TY RoHS : Compliant |
| 7 | ||
![]() RS | 831860C2.0 (83186001) | Crouzet | SWITCH SNAP ACTION SUBMINIATURE, 83180 SERIES |
| 577 | |
| C20820400 | Norgren | FITTING, UNION PARALLEL Y 1/4" |
| 18 | ||
| C20820200 | Norgren | FITTING, UNION Y 5/32" |
| 10 | ||
| C20820600 | Norgren | FITTING, UNION Y 3/8 |
| 6 | ||
| TC208 | Weller Hand Tools GmbH | WELLER, HEATING ELEMENT FOR SOLDERING PENCIL ON WTCP SERIES SOLDERING STATIONS |
| 2 | ||
| CC208.0 | Square D by Schneider Electric | MELTING ALLOY THERMAL UNIT CLASS 20 |
| 2 | ||
| JC20-8-125 | SMC Corporation of America | LIGHT WEIGHT FLOATING JOINT, M8 X 1.25 PORT SIZE, ALUMINUM, JC SERIES |
| 1 | ||
| UC208 (1741109) | FAG Bearings | RADIAL INSERT BALL BEARING ID40MM OD80MM |
| 1 | ||
| C208 | Goodyear Belts | CLASSICAL V-BELT, 1 BAND, C' SECTION |
| 0 | ||
| JC2-08/J (JC2-08-J) | Eaton Electronics | JUMPER/CONTACT |
| 0 | ||
| UCFC208-J7 (UCFC208J7) | FAG Bearings | FLANGED HOUSING UNIT |
| 0 | ||
| UC208-25 (PER.UC208-25) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| UC208-40MM (PER.UC208-A) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| 01C208EX (COP.01 C 208 EX) | SKF Cooper | COOPER SPLIT BEARING |
| 0 | ||
| 01EBC208EXAT (COP.01EBC208EXAT) | SKF Cooper | COOPER BEARING AND CARTRIDGE ASSEMBLY, BORE DIA. 2-1/2 IN |
| 0 | ||
![]() Microchip Technology Inc | DSPIC33AK256MC208-I/PT | Microchip Technology Inc | 200MHz, 256KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 119 | |
| DSPIC33AK512MC208-I/PT | Microchip Technology Inc | 200MHz, 512KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 19 | ||
| TSC 2080 | Microchip Technology Inc | MD LC03721 10-25 DUAL 1X4 RF SWITCH, Projected EOL: 2035-01-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2085-JYQS | Microchip Technology Inc | Single-Channel Low Voltage Hot Swap Controller, VFAST = 100 mV, QSOP, Projected EOL: 2036-03-29 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2085-JYQS-TR | Microchip Technology Inc | Single-Channel Low Voltage Hot Swap Controller, VFAST = 100 mV, QSOP, Projected EOL: 2036-06-16 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSPIC33AK256MC208-E/PT | Microchip Technology Inc | 200MHz, 256KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK256MC208-H/PT | Microchip Technology Inc | 200MHz, 256KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK512MC208-E/PT | Microchip Technology Inc | 200MHz, 512KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK512MC208-H/PT | Microchip Technology Inc | 200MHz, 512KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK256MC208T-E/PT | Microchip Technology Inc | 200MHz, 256KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK256MC208T-I/PT | Microchip Technology Inc | 200MHz, 256KB Flash, ISO 26262-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 0 | ||
| DSPIC33AK512MC208T-E/PT | Microchip Technology Inc | 200MHz, 512KB Flash, FuSa-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-01-28 RoHS : Compliant |
| 0 | ||
| DSPIC33AK512MC208T-I/PT | Microchip Technology Inc | 200MHz, 512KB Flash, ISO 26262-Compliant, HS-Analog, HS-PWMs, Touch, TQFP, Projected EOL: 2051-05-27 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | PN5472A2UK/C20803Z | NXP Semiconductors | PN5472A2UK - NFC/RFID Tag and Transponder ICs RoHS : Not Compliant |
| 50,000 | |
CDC208DW![]() | Texas Instruments | Clock Buffer 1:4 60MHz 20-SOIC Tube RoHS : Compliant |
| 19,812 | ||
EP20K200RC208-3V![]() | Altera Corporation | Loadable PLD, 3.6ns, CMOS, PQFP208 RoHS : Not Compliant |
| 89 | ||
EPF10K100EQC208-2![]() | Altera Corporation | Loadable PLD, 0.5ns, CMOS, PQFP208 RoHS : Not Compliant |
| 345 | ||
EPF8636ARC208-3![]() | Altera Corporation | Loadable PLD, 5ns, CMOS, PQFP208 RoHS : Not Compliant |
| 5,096 | ||
EP20K30EQC208-2![]() | Altera Corporation | Loadable PLD, 2.69ns, CMOS, PQFP208 RoHS : Not Compliant |
| 39 | ||
EPF8636AQC208-3![]() | Altera Corporation | Loadable PLD, 5ns, CMOS, PQFP208 RoHS : Not Compliant |
| 315 | ||
EPF10K100EQC208-1X![]() | Altera Corporation | Loadable PLD, 0.4ns, CMOS, PQFP208 RoHS : Not Compliant |
| 197 | ||
EPM7256AQC208-7![]() | Altera Corporation | EE PLD, 7.5ns, 256-Cell, CMOS, PQFP208 RoHS : Not Compliant |
| 783 | ||
EPM7256ERC208-20![]() | Altera Corporation | EE PLD, 20ns, 256-Cell, CMOS, PQFP208 RoHS : Not Compliant |
| 1,085 | ||
EP1K10QC208-2![]() | Altera Corporation | Loadable PLD, 120 I/O, 37.5MHz, 576-Cell, CMOS, PQFP208 RoHS : Not Compliant |
| 870 | ||
EPM7512BQC208-10![]() | Altera Corporation | EE PLD, 5.5ns, 512-Cell, CMOS, PQFP208 RoHS : Not Compliant |
| 271 | ||
EP1K10QC208-2N![]() | Altera Corporation | Field Programmable Gate Array, 120 I/O, 37.5MHz, CMOS, PQFP208 RoHS : Compliant |
| 1 | ||
EP20K60EQC208-2![]() | Altera Corporation | Loadable PLD, 2.41ns, CMOS, PQFP208 RoHS : Not Compliant |
| 9 | ||
| MIC2085JBQS | Micrel Inc | SINGLE Channel HOT SWAP CONTROLLER RoHS : Not Compliant |
| 9 | ||
![]() Sager | BC2-08BF | Eaton Bussmann | Terminal Block Tools & Accessories TOP COVER-MFGR | 0 | ||
| MEC2-08-01-L-DV-NP-TR | Samtec Inc | Headers & Wire Housings RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-NP-WT-K-TR | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
ATS-20C-208-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-05C-208-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
ATS-18C-208-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM |
| 0 | ||
ATS-21C-208-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-K-TR | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| UC208 | Panduit Corp | UNI-CRIMP 208 PRESS WITH AIR KIT | 0 | |||
ATS-12C-208-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
| MEC2-08-01-L-DV-NP-K-TR | Samtec Inc | Standard Card Edge Connectors 2.00 mm Mini Edge Card Connector, Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-NP-WT-FR | Samtec Inc | Standard Card Edge Connectors | 0 | |||
| MEC2-08-02-L-DV-WT-FR | Samtec Inc | Standard Card Edge Connectors | 0 | |||
ATS-09C-208-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 |
| 0 | ||
ATS-21C-208-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
![]() TME | C208-BLUE | tasker | Wire: microphone cable; 2x0.25mm2; blue; OFC; -15÷70°C |
| 203 | |
| C208-RED | tasker | Wire: microphone cable; 2x0.25mm2; red; OFC; -15÷70°C |
| 176 | ||
| A9C20834 | Schneider Electric | Contactor: 4-pole installation; 25A; 230÷240VAC; NO x4; IP20; ICT RoHS : Compliant |
| 12 | ||
| A9C20864 | Schneider Electric | Contactor: 4-pole installation; 63A; 230÷240VAC; NO x4; IP20; ICT RoHS : Compliant |
| 7 | ||
| A9C20833 | Schneider Electric | Contactor: 3-pole installation; 25A; 230÷240VAC; NO x3; IP20; ICT RoHS : Compliant |
| 6 | ||
| A9C20863 | Schneider Electric | Contactor: 3-pole installation; 63A; 230÷240VAC; NO x3; IP20; ICT RoHS : Compliant |
| 3 | ||
| A9C20867 | Schneider Electric | Contactor: 4-pole installation; 63A; 230÷240VAC; NC x4; IP20; ICT RoHS : Compliant |
| 3 | ||
| A9C20869 | Schneider Electric | Contactor: 4-pole installation; 63A; 230÷240VAC; NC + NO x3; IP20 RoHS : Compliant |
| 1 | ||
CBR04C208B5GAC![]() | KEMET Corporation | Capacitor: ceramic; MLCC; 0.2pF; 50V; C0G (NP0); ±0.1pF; SMD; 0402 RoHS : Compliant |
| 0 | ||
CDC208DWR![]() | Texas Instruments | IC: digital; driver; SMD; SOIC20; -55÷125°C; reel,tape RoHS : Compliant |
| 0 | ||
| CIPR-GA50C2082EBAA-BAAASA | Yaskawa Controls Co Ltd | Automation module: vector inverter; 18.5/22kW; 3x230VAC; 0÷590Hz |
| 0 | ||
| DF40C(2.0)-80DS-0.4V(51) | Hirose Electric Co Ltd | Connector: PCB to PCB; socket; female; PIN: 80; DF40; vertical; SMT RoHS : Compliant |
| 0 | ||
| MCT06030C2081DP500 | Vishay Intertechnologies | Resistor: thin film; 2.08kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| MCT06030C2082DPW00 | Vishay Intertechnologies | Resistor: thin film; 20.8kΩ; SMD; 0603; 0.125W; ±0.5%; MCT0603; 0 RoHS : Compliant |
| 0 | ||
| DF40C(2.0)-80DS-0.4V(58) | Hirose Electric Co Ltd | Connector: PCB to PCB; socket; female; PIN: 80; DF40; vertical; SMT RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | PRC208470M330M | Semtech Corporation | Electronic Component RoHS : Not Compliant | 2,128 | ||
| EPF10K30AQC2082 | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.7ns, CMOS, PQFP208 RoHS : Not Compliant | 626 | |||
| EPF8820AQC2084 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP208 RoHS : Not Compliant | 66 | |||
| EP1K100QC2083 | Intel Corporation | FPGAs ACEX-1K 49152b 2.375V 147 I/O 208-QFP RoHS : Not Compliant | 42 | |||
| EPF81188AQC2083 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP208 RoHS : Not Compliant | 27 | |||
| EPF10K50SQC2083N | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE Loadable PLD, 0.5ns, CMOS, PQFP208 RoHS : Compliant | 24 | |||
| EPM7512AEQC20812N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 12ns, 512-Cell, CMOS, PQFP208 RoHS : Compliant | 24 | |||
| EPF8636AQC2082 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, CMOS, PQFP208 RoHS : Not Compliant | 20 | |||
| EPM7256AEQC20810N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 10ns, 256-Cell, CMOS, PQFP208 RoHS : Compliant | 14 | |||
| EP20K100QC2083N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, 3.6ns, CMOS, PQFP208 RoHS : Compliant | 8 | |||
| EP20K160EQC2082 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE Loadable PLD, 1.93ns, CMOS, PQFP208 RoHS : Not Compliant | 6 | |||
| EPM7256SRC20810N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 10ns, 256-Cell, CMOS, PQFP208 RoHS : Compliant | 4 | |||
| EPM7256SRC20815 | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 15ns, 256-Cell, CMOS, PQFP208 RoHS : Not Compliant | 4 | |||
| EPF10K30AQC2082N | Altera Corporation | EMBEDDED PROGRAMMABLE LOGIC DEVICE FAMILY Loadable PLD, 0.7ns, CMOS, PQFP208 RoHS : Compliant | 3 | |||
| EPM3256AQC20810N | Altera Corporation | PROGRAMMABLE LOGIC DEVICE EE PLD, 10ns, 256-Cell, CMOS, PQFP208 RoHS : Compliant | 3 | |||
![]() Interstate Connecting Components | PT03C-20-8P(025) | Amphenol Industrial Operations | RECEPTACLE | 0 | ||
| SP02C-20-8P(003) | Amphenol Aerospace | RECEPT 71-314552-08P | 0 | |||
| SP00C-20-8S(SR) | Amphenol Aerospace | RECEPT 72-184120-08S | 0 | |||
| SP02C-20-8S(009) | Amphenol Aerospace | RECEPT 79-314552-08S | 0 | |||
| C20849-3P | Glenair Inc | 0 | ||||
| 801-069-26M16-55AC208 | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-069-26NF10-26BC208 | Glenair Inc | 0 | ||||
| PC00C-20-8P(101) | Amphenol Aerospace | RECEPT 10-151020-08P | 0 | |||
| 805-061-16NF18-55AC208 | Glenair Inc | RoHS : Not Compliant | 0 | |||
| C20816-3HW12 | Glenair Inc | D54 - CONNECTOR, ACCESS | 0 | |||
| PC00C-20-8P | Amphenol Aerospace | RECEPT 10-152020-08P | 0 | |||
| MS3100C20-8P | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| 801-069-26M13-37PC208 | Glenair Inc | RoHS : Compliant | 0 | |||
| SP02C-20-8P(009) | Amphenol Aerospace | RECEPT 79-314552-08P | 0 | |||
| SP02C-20-8P(344) | Amphenol Aerospace | RECEPT 86-184220-08P | 0 | |||
![]() NexGen Digital | HMC208MS8E | Hittite Microwave Corp | RoHS : Compliant | 661 | ||
EPF8820ARC208-3![]() | Altera Corporation | RoHS : Not Compliant | 226 | |||
EPF8820ARC208-4![]() | Altera Corporation | RoHS : Not Compliant | 9 | |||
EPF8820RC208-3![]() | Altera Corporation | RoHS : Not Compliant | 8 | |||
![]() PEI Genesis | CB6LC20-8SS | ITT Interconnect Solutions |
| 4 | ||
| CB6FC20-8SS | ITT Interconnect Solutions |
| 4 | |||
| CB6TC20-8SC | ITT Interconnect Solutions |
| 0 | |||
| CB1LC20-8PS | ITT Interconnect Solutions |
| 0 | |||
| CB6LC20-8SC | ITT Interconnect Solutions |
| 0 | |||
![]() Avnet Abacus | CBR04C208A3GAC![]() | KEMET Corporation | SMD Multilayer Ceramic Capacitor 02 pF 25 V 0402 1005 Metric 005pF C0G NP0 - Tape and Reel (Alt: CBR04C208A3GAC) RoHS : Compliant | 0 | ||
| CBR04C208A2GAC | KEMET Corporation | SMD Multilayer Ceramic Capacitor 02 pF 200 V 0402 1005 Metric 005pF C0G NP0 - Tape and Reel (Alt: CBR04C208A2GAC) RoHS : Compliant | 0 | |||
AMPMADC-2.0800![]() | Abracon Corporation | (Alt: AMPMADC-2.0800) RoHS : Compliant | 0 | |||
AMPMEFC-2.0800![]() | Abracon Corporation | (Alt: AMPMEFC-2.0800) RoHS : Compliant | 0 | |||
AMPMAEC-2.0800T![]() | Abracon Corporation | (Alt: AMPMAEC-2.0800T) RoHS : Compliant | 0 | |||
AMPMDGC-2.0800T![]() | Abracon Corporation | (Alt: AMPMDGC-2.0800T) RoHS : Compliant | 0 | |||
AMPMGDC-2.0800T3![]() | Abracon Corporation | (Alt: AMPMGDC-2.0800T3) RoHS : Compliant | 0 | |||
AMPMDGC-2.0800T3![]() | Abracon Corporation | (Alt: AMPMDGC-2.0800T3) RoHS : Compliant | 0 | |||
AMPMEGC-2.0800T3![]() | Abracon Corporation | (Alt: AMPMEGC-2.0800T3) RoHS : Compliant | 0 | |||
| M80-FC20868FC-0150L | Harwin | Cable Assembly PTFE 015m 24AWG 8POS Datamate RCP Bulk (Alt: M80-FC20868FC-0150L) RoHS : Compliant | 0 | |||
| GPHC208-0510A010B1BF | Greenconn Corp | shrouded header 2x5pos pitch 254mm SMD (Alt: GPHC208-0510A010B1BF) RoHS : Compliant | 0 | |||
| MEC2-08-01-L-DV-K-TR | Samtec Inc | (Alt: MEC2-08-01-L-DV-K-TR) RoHS : Compliant | 0 | |||
| MEC2-08-01-L-DV-NP-TR | Samtec Inc | (Alt: MEC2-08-01-L-DV-NP-TR) RoHS : Compliant | 0 | |||
| MEC2-08-01-L-DV-NP-K-TR | Samtec Inc | Conn Card Edge F 16 POS 2mm Solder ST SMD TR (Alt: MEC2-08-01-L-DV-NP-K-TR) RoHS : Compliant | 0 | |||
| MEC2-08-01-L-DV-NP-WT-K-TR | Samtec Inc | (Alt: MEC2-08-01-L-DV-NP-WT-K-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | CSEC208-0802A001C1AD | Greenconn Corp | Conn Socket Strip RCP 16 POS 1.27mm Solder RA SMD (Alt: CSEC208-0802A001C1AD) RoHS : Compliant | 0 | ||
| CSEC208-0302A004C1AH | Greenconn Corp | GCTCSEC208-0302A004C1AH 1.27MM PITCH DAU (Alt: CSEC208-0302A004C1AH) RoHS : Compliant | 0 | |||
| PI6C20800SAEX | Diodes Incorporated | Clock Buffer, PCIe Fanout, 95 MHz to 400 MHz, 8 Outputs, 3.135 V to 3.465 V, 48 Pins, TSSOP (Alt: PI6C20800SAEX) RoHS : Compliant | 0 | |||
| GPEC208-0802A110C1ZF | Greenconn Corp | GCTGPEC208-0802A110C1ZF CONNECTOR 1.27 P (Alt: GPEC208-0802A110C1ZF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | DALC208SC6Y | STMicroelectronics | ESD Protection Device SOT23 6 Pins (Alt: DALC208SC6Y) RoHS : Compliant | 21,000 | ||
| PI6C20800SVEX | Diodes Incorporated | Clock Buffer LowOutput Skew 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins SSOP (Alt: PI6C20800SVEX) RoHS : Compliant | 0 | |||
| PI6C20800SAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800SAEX) RoHS : Compliant | 0 | |||
| PI6C20800BAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800BAEX) RoHS : Compliant | 0 | |||
| PI6C20800BIAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800BIAEX) RoHS : Compliant | 0 | |||
| PI6C20800SIAEX | Diodes Incorporated | Clock Buffer PCIe Fanout 95 MHz to 400 MHz 8 Outputs 3135 V to 3465 V 48 Pins TSSOP (Alt: PI6C20800SIAEX) RoHS : Compliant | 0 | |||
| DSPIC33AK512MC208-I/PT | Microchip Technology Inc | 200MHz 512KB Flash FuSaCompliant HSAnalog HSPWMs Touch (Alt: DSPIC33AK512MC208-I/PT) RoHS : Compliant | 0 | |||
| DSPIC33AK512MC208-E/PT | Microchip Technology Inc | 200 MHZ 512KB FLASH FUSACOMPLIANT HSANALOG HSPWMS TOUCH (Alt: DSPIC33AK512MC208-E/PT) RoHS : Compliant | 0 | |||
![]() DB Roberts | C2080-P | Heyco | LTBP 1375-250 BLACK 10PK | 0 | ||
| AE803C2083 | PennEngineering (PEM) | GUN | 0 | |||
| AE803C2083R | PennEngineering (PEM) | REPAIR | 0 | |||
| C2082 | Heyco | LTBP 1500-250 BLACK RoHS : Compliant | 0 | |||
| C20-832 | PennEngineering (PEM) | 0 | ||||
| C2080 | Heyco | LTBP 1375-250 BLACK RoHS : Compliant | 0 | |||
| CM-C208 | Southco | 0 | ||||
| C2082-P | Heyco | LTBP 1500-250 BLACK 10PK | 0 | |||
| C2082JJ | Heyco | LTBP 1500-250 LT GRAY 00050047 | 0 | |||
![]() EBV Elektronik | DALC208SC6 | STMicroelectronics | ESD Protection Device Array SOT23 6 Pins 12 V DALC2 (Alt: DALC208SC6) RoHS : Compliant | 342,000 | ||
| DALC208SC6 | STMicroelectronics | ESD Protection Device Array SOT23 6 Pins 12 V DALC2 (Alt: DALC208SC6) RoHS : Compliant | 0 | |||
| DALC208SC6Y | STMicroelectronics | ESD Protection Device SOT23 6 Pins (Alt: DALC208SC6Y) RoHS : Compliant | 0 | |||
| HLMP-C208-S0000 | Broadcom Limited | (Alt: HLMP-C208-S0000) RoHS : Compliant | 0 | |||
| NPC1002A2EV/C208BY | NXP Semiconductors | PHANPC1002A2EVC208BY NFC CONTROLLER (Alt: NPC1002A2EV/C208BY) RoHS : Compliant | 0 | |||
| NPC1002A2EV/C20803 | NXP Semiconductors | Identification Authentication Security ICs (Alt: NPC1002A2EV/C20803) RoHS : Compliant | 0 | |||
| XC208096F66LACKXUMA1 | Infineon Technologies AG | MCU 16Bit XC2000 C166 RISC 768KB Flash 144Pin LQFP TR (Alt: SP000919146) RoHS : Compliant | 0 | |||
| DSPIC33AK512MC208-I/PT | Microchip Technology Inc | 200MHz 512KB Flash FuSaCompliant HSAnalog HSPWMs Touch (Alt: DSPIC33AK512MC208-I/PT) RoHS : Compliant | 0 | |||
![]() Flip Electronics | EPM3256AQC208-7![]() | Altera Corporation | Stock, Ship Today RoHS : Not Compliant | 4,590 | ||
EPM3256AQC208-10![]() | Altera Corporation | Stock RoHS : Not Compliant | 4,590 | |||
EPM3256AQC208-10N![]() | Altera Corporation | Stock RoHS : Compliant | 4,590 | |||
![]() Master Electronics | BM6-85-AC208V | Panasonic Electronic Components | RoHS : Compliant |
| 4 | |
| FR-M50-AC208V-42 | Panasonic Electronic Components | RoHS : Compliant |
| 1 | ||
| MEC2-08-01-L-DV-NP-TR | Samtec Inc | 2.00 mm Micro Edge Card Socket RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-NP-WT-K-TR | Samtec Inc | 2.00 mm Micro Edge Card Socket RoHS : Compliant |
| 0 | ||
| ECM-B3M-C20807SB1 | Delta Power | RoHS : Compliant |
| 0 | ||
| CC20801X | Marathon Special Products | Double Row Top Mounted Cover - Series 2 - 8 Terminals - 01X Print Style - Clear. RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-K-TR | Samtec Inc | 2.00 mm Mini Edge Card Connector Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-NP-K-TR | Samtec Inc | 2.00 mm Micro Edge Card Socket RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-TH2-NP-WT | Samtec Inc | 2.00 MM MINI EDGE CARD CO RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-K-FR | Samtec Inc | 2.00 MM MINI EDGE CARD CO RoHS : Compliant |
| 0 | ||
| MEC2-08-01-L-DV-NP-WT | Samtec Inc | 2.00 mm Micro Edge Card Socket RoHS : Compliant |
| 0 | ||
| MEC2-08-02-L-DV-WT | Samtec Inc | 2.00 mm Mini Edge Card Connector Vertical RoHS : Compliant |
| 0 | ||
| MEC2-08-02-L-TH2-WT | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MEC2-08-02-L-TH1-NP-WT | Samtec Inc | 2.00 MM MINI EDGE CARD CO RoHS : Compliant |
| 0 | ||
| HL-C208CE-MK | Panasonic Electronic Components | MEASURING RANGE: 85 20MM / RoHS : Compliant |
| 0 | ||
![]() Neutron USA | ECM-B3M-C20807RS1 | Delta Electronics Inc | Positional Rotation AC Motor Servomotor 3000 RPM 750W Incremental 220VAC |
| 5 | |
| MC-32A-AC208V | Altech Corporation | Contactors - Electromechanical Contactor, 3 Pole, 32A |
| 3 | ||
| MC-40A-AC208V | Altech Corporation | Contactors - Electromechanical Contactor, 3 Pole, 40A |
| 1 | ||
| GMC-12M-10-AC208V | Altech Corporation | Contactors - Electromechanical MINI CONTACTOR,12A/380/440V |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2082/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2082/HS can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2082/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2082/HS can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink. | 0 | ||
| PE3C2087 | Pasternack Enterprises | 0 | ||||
| PE3C2082/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMA Male Right Angle Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2082/HS-100CM can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2082/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2082/HS-100CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3C2086 | Pasternack Enterprises | 0 | ||||
| PE3C2080/HS2 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-400-UF Coax with Double HeatShrink., Radio frequency assembly N male to N male cable using LMR-400-UF coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable using LMR-400-UF coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C2080/HS2, can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C2080/HS2 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable using LMR-400-UF coax with double heatshrink. | 0 | |||
| PE3C2082LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082LF/HS-36 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082LF/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082LF/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082LF/HS-36 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2082LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Low Loss Cable Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082LF/HS can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082LF/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082LF/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082LF/HS can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C2084/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to BNC Female Bulkhead Cable Using LMR-100 Coax with HeatShrink. PE3C2084/HS is a SMA male right angle to BNC female bulkhead cable using LMR-100A coax. This Pasternack SMA male right angle to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2084/HS SMA male right angle to BNC female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C2082/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2082/HS-36 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2082/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2082/HS-36 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle low loss cable 36 inch length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3C2088 | Pasternack Enterprises | 0 | ||||
| PE3C2082LF/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMA Male Right Angle Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082LF/HS-100CM can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082LF/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082LF/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082LF/HS-100CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2089/HS2 | Pasternack Enterprises | 0 | ||||
| PE3C2082-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to SMA male right angle low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and right angle a SMA cable connection on the other. Our low loss a SMA to right angle a SMA cable assembly has male gender on end 1 and male on end 2. PE3C2082-48 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2082-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3C2082-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2082-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2089 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Male to N Female Cable Using LMR-600 Coax., Radio frequency assembly N male to N female cable using LMR-600 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female cable using LMR-600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C2089, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C2089 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2089 can also be used in the other direction and will be type N female to N type male cable assembly if the opposite connectivity is required. Type N plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female cable using LMR-600 coax. | 0 | |||
| PE3C2088/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Female to BNC Male Cable Using LMR-240 Coax with. PE3C2088/HS is a N female to BNC male cable using LMR-240 coax. This Pasternack N female to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our female N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2088/HS N female to BNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | H53C208NN00000100000 | TE Connectivity | 723 HTEC RECEPTACLE, SPEEDTEC Number of Positions: 10 Connector Product Type: Connector Assembly Operating Voltage: 850 VDC 50 VDC Connector System: Cable-to-Panel Sealable: No Circular Power Connector | 10 Connector Assembly 850 VDC Cable-to-Panel | Part Number: H53C208NN00000100000 | Internal Number: HEC208N00000100000 | TE Connectivity RoHS : Compliant |
| 36 | |
![]() Vyrian | EP1K100QC208-2![]() | Altera Corporation | Loadable PLD, 0.5ns, CMOS, PQFP208 RoHS : Not Compliant | 4,100 | ||
EPF10K30EQC208-1N![]() | Altera Corporation | Loadable PLD, 0.4ns, CMOS, PQFP208 RoHS : Compliant | 3,828 | |||
EP20K160ERC208-3X![]() | Altera Corporation | Loadable PLD, CMOS, PQFP208 RoHS : Not Compliant | 3,784 | |||
EP20K300ERC208-3![]() | Altera Corporation | Loadable PLD, PQFP208 RoHS : Not Compliant | 3,747 | |||
EP20K30ERC208-1X![]() | Altera Corporation | Loadable PLD, CMOS, PQFP208 RoHS : Not Compliant | 3,195 | |||
EP20K100RC208-1![]() | Altera Corporation | Loadable PLD, CMOS, PQFP208 RoHS : Not Compliant | 3,091 | |||
EP20K100QC208-3![]() | Altera Corporation | Loadable PLD, 3.6ns, CMOS, PQFP208 RoHS : Not Compliant | 2,759 | |||
EP1K100QC208-3N![]() | Altera Corporation | Loadable PLD, 0.7ns, CMOS, PQFP208 RoHS : Compliant | 2,690 | |||
| EP20K100QC208 | Altera Corporation | Field Programmable Gate Array RoHS : Not Compliant | 2,414 | |||
| EPF81188AGC208-2 | Altera Corporation | Field Programmable Gate Array, 1008-Cell, CMOS, CPGA208 RoHS : Not Compliant | 2,382 | |||
EP20K100RC208-1X![]() | Altera Corporation | Loadable PLD, CMOS, PQFP208 RoHS : Not Compliant | 1,939 | |||
EP20K200EQC208-2![]() | Altera Corporation | Loadable PLD, 1.97ns, CMOS, PQFP208 RoHS : Not Compliant | 1,843 | |||
EPF10K40RC208-4![]() | Altera Corporation | Loadable PLD, 0.6ns, CMOS, PQFP208 RoHS : Not Compliant | 1,567 | |||
EP20K200CQC208-7X![]() | Altera Corporation | Loadable PLD, 1.6ns, PQFP208 | 1,392 | |||
| EP1K100QC208-2P | Altera Corporation | Field Programmable Gate Array, 4992-Cell, CMOS, PQFP208 RoHS : Not Compliant | 1,382 | |||
![]() Waytek, Inc. | C2082 | Heyco | Heyco C2082 liquid-tight hole plug is a sealing panel plug sized for a 1.500" opening to close unused liquid-tight conduit entry holes. Its sealing design supports secure retention, moisture resistance, and cleaner enclosure protection in electrical and equipment applications. RoHS : Compliant |
| 1,343 | |
| C2080 | Heyco | Heyco C2080 liquid-tight hole plug is a sealing panel plug sized for a 1.375" opening to close unused liquid-tight conduit entry holes. Its sealing design supports secure retention, moisture resistance, and cleaner enclosure protection in electrical and equipment applications. RoHS : Compliant |
| 0 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |