 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
C120/9-HT2-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Ameya Holding Limited | RC1206JR-07470RL | YAGEO Corporation | RoHS : Compliant | 70,000 | ||
| RC1206FR-072K2L | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC1206JR-07560RL | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC1206JR-071K2L | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC1206FR-07150KL | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC1206FR-0720KL | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC1206FR-07511RL | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC1206FR-07180RL | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC1206JR-07100RL | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC1206FR-074R7L | YAGEO Corporation | RoHS : Compliant | 50,000 | |||
| RC1206JR-072K7L | YAGEO Corporation | RoHS : Compliant | 35,000 | |||
| RC1206FR-07220KL | YAGEO Corporation | RoHS : Compliant | 30,000 | |||
CC1206KKX5R8BB106 | YAGEO Corporation | RoHS : Compliant | 24,000 | |||
| CC1206KKX7R9BB224 | YAGEO Corporation | RoHS : Compliant | 12,000 | |||
AMC1200BDWVR | Texas Instruments | RoHS : Compliant | 3,000 | |||
 ComSIT USA | RC1206FR078K06 | yag | Resistor RoHS : Compliant | 44,323 | ||
| RC1206FR071K8L | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1800ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 35,000 | |||
C1206X472JBGACAUTO%20Kemet.jpg) | KEMET Corporation | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 630V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.0047uF, Surface Mount, 1206 RoHS : Compliant | 22,500 | |||
| RC1206FR07160K | YAGEO Corporation | GENERAL PURPOSE SURFACE MOUNT CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 160000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 20,000 | |||
| RC1206FR07820KL | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 820000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 20,000 | |||
| RC1206FR106K04L | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 6040ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 10,000 | |||
| RC1206JR076K2L | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 6200ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 10,000 | |||
| AC1206JR0762RL | YAGEO Corporation | THICK FILM CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 62ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 10,000 | |||
| RC1206FR07110RL | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 110ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 10,000 | |||
| RC1206FR0720RL | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 20ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 10,000 | |||
C1206C224K5RAC | KEMET Corporation | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.22uF, Surface Mount, 1206 RoHS : Compliant | 8,000 | |||
| RC1206FR0751KL | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 51000ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| AC1206FR07120RL | YAGEO Corporation | THICK FILM RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 120ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| RC1206FR0743K2L | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.25W, 43200ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 5,000 | |||
| C1206C471J5GAC7800 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 50V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.00047uF, Surface Mount, 1206 RoHS : Compliant | 4,000 | |||
 NexGen Digital | C1206COG500-1R0BNE | VENKEL LTD | 28,303 | |||
| C1206C0G500-1R2CNE | VENKEL LTD | RoHS : Compliant | 11,150 | |||
| NMC1206X7R273K50TRPF | Nichicon Corporation | 8,701 | ||||
| C1206C224J3RAC7800 | KEMET Corporation | RoHS : Compliant | 8,000 | |||
CC1206KKX7RABB683 | YAGEO Corporation | RoHS : Compliant | 7,604 | |||
| RC1206FR-0741K2L | YAGEO Corporation | RoHS : Compliant | 6,796 | |||
| RC1206JR-079RL | YAGEO Corporation | 5,000 | ||||
| C1206C0G500-100JNE | VENKEL LTD | RoHS : Compliant | 4,743 | |||
| RC1206FR-076K8L | YAGEO Corporation | RoHS : Compliant | 3,040 | |||
| CO603C120J5HAC7 | KEMET Corporation | 2,554 | ||||
| C1206C224K5RAC | KEMET Corporation | RoHS : Compliant | 2,318 | |||
| C1206C473M5RAC-TU | KEMET Corporation | 2,000 | ||||
| RC1206FR-073K32L | YAGEO Corporation | RoHS : Compliant | 1,133 | |||
| C1206C103M5RAC-TU | KEMET Corporation | 317 | ||||
| AMC1202DWVR | Texas Instruments | RoHS : Compliant | 15 | |||
 PUI | MC1206-3482-FTW | RCD Components Inc | RoHS : Compliant | 10,000 | ||
| C1206N222K101TX | HolyStone International | RoHS : Compliant | 8,000 | |||
| C1206N681K050TX | HolyStone International | RoHS : Compliant | 6,000 | |||
| C1206N561J050TX | HolyStone International | RoHS : Compliant | 3,000 | |||
| C1206X332K050TX | HolyStone International | RoHS : Compliant | 3,000 | |||
| 8935-C120129YEB02SB | 189 | |||||
| 389FXBXC-120A | 76 | |||||
| 788XBXRC-120A | 10 | |||||
| 389FXCXC-120A | 9 | |||||
| 782XBXC-120A | 7 | |||||
| 792XDX3C-120A | 3 | |||||
| 750XBXRC-120A | 2 | |||||
 Richardson RFPD | DC1202512J2B-3T0 | Wakefield-Vette | FAN RoHS : Compliant |
| 0 | |
| DC1203812W2B-BT0 | Wakefield-Vette | FAN RoHS : Compliant |
| 0 | ||
| DC1203824V2B-2T0 | Wakefield-Vette | DC1203824V2B-2T0 RoHS : Not Compliant | 0 | |||
ASEMPC-12.000MHZ-LR-T | Abracon Corporation | Oscillator MEMS 12MHz ±25ppm (Stability) CMOS 55% RoHS : Compliant | 0 | |||
| R570C12000 | Radiall | RF COAXIAL SWITCH RoHS : Not Compliant | 0 | |||
| APC1206T200RZ | Ohmite Mfg Co | APC1206T200RZ RoHS : Compliant |
| 0 | ||
| IPP-RB101LC-120 | Innovative Power Products Inc | Flangeless Other Mounting Resistor RoHS : Compliant | 0 | |||
| APC1206B1K00N | Ohmite Mfg Co | THIN FILM CHIP, 1K OHM, 0.1%, 25PPM RoHS : Compliant |
| 0 | ||
| PM150RG1C120 | Mitsubishi Electric | Flat Base Type Intelligent Power Modules - IPMs RoHS : Compliant |
| 0 | ||
| APTMC120TAM17CTPAG | Microchip Technology Inc | Trans MOSFET N-CH SiC 1.2KV 147A Tube RoHS : Compliant | 0 | |||
| ELANC1205DUW6 | Wall Industries Inc | 6 Watt DC/DC PowerConverter Module RoHS : Compliant | 0 | |||
| 800C120FMS3600X | Kyocera AVX Components | MULTILYRCERAMIC CAP | 0 | |||
| 800C120JMNXJ2 | Kyocera AVX Components | MULTILYRCERAMIC CAP | 0 | |||
| PM100CG1C120 | Mitsubishi Electric | IGBT RF Modules RoHS : Compliant |
| 0 | ||
| 100C120GW2500XJ36 | Kyocera AVX Components | Cap Ceramic 12pF 2500V +90±30ppm/C 2% Pad SMD 125C RoHS : Not Compliant | 0 | |||
 Rutronik | VC120626D580RP | Kyocera AVX Components | VC 1206 DC=26V CL=60V 0,4J 120A RoHS : Compliant |
| 84,000 | |
| TCC1206X7R104K500DT | KC 100nF 1206 10% 50V X7R RoHS : Compliant |
| 60,000 | |||
| TCC1206X7R104K101FT | KC 100nF 1206 10% 100V X7R RoHS : Compliant |
| 45,000 | |||
| VC120626F540RP | Kyocera AVX Components | VC 1206 DC=26V CL=54V 0,7J 200A RoHS : Compliant |
| 44,000 | ||
| VC120614A300RP | Kyocera AVX Components | VC 1206 DC=14V CL=32V 0,1J 40A RoHS : Compliant |
| 32,000 | ||
| VC120614A300DP | Kyocera AVX Components | VC 1206 DC=14V CL=32V 0,1J 40A RoHS : Compliant |
| 28,000 | ||
| TCC1206X7R105K250HT | KC 1,0µF 1206 10% 25V X7R RoHS : Compliant |
| 26,000 | |||
| VC120638N770DP | Kyocera AVX Components | VC 1206 DC=38V CL=77V 1,1J RoHS : Compliant |
| 22,000 | ||
| TCC1206X5R107M6R3HT | KC 100µF 1206 20% 6,3V X5R RoHS : Compliant |
| 16,000 | |||
| VC120618A400DP | Kyocera AVX Components | VC 1206 DC=18V CL=42V 0,1J RoHS : Compliant |
| 15,000 | ||
| VC120656F111RP | Kyocera AVX Components | VC 1206 DC=56V CL=110V 0,7J RoHS : Compliant |
| 12,000 | ||
| VC120618D400RP | Kyocera AVX Components | VC 1206 DC=18V CL=42V 0,4J RoHS : Compliant |
| 8,000 | ||
| VC120630D650DP | Kyocera AVX Components | VC 1206 DC=30V CL=67V 0,4J 120A RoHS : Compliant |
| 4,000 | ||
| VC120605A150DP | Kyocera AVX Components | VC 1206 DC=5,6V CL=18V 0,1J RoHS : Compliant |
| 1,000 | ||
| VC120626D580DP | Kyocera AVX Components | VC 1206 DC=26V CL=60V 0,4J 120A RoHS : Compliant |
| 1,000 | ||
 Chip 1 Exchange | RC1206FR-07150RL | YAGEO Corporation | INSTOCK RoHS : Compliant | 350,708 | ||
| C1206C103KBRACAUTO | KEMET Corporation | INSTOCK RoHS : Compliant | 25,970 | |||
| RC1206FR | YAGEO Corporation | INSTOCK | 11,447 | |||
| C1206C102K1RACTU | KEMET Corporation | INSTOCK RoHS : Compliant | 8,887 | |||
| C1206C120C1GAC7800 | KEMET Corporation | INSTOCK RoHS : Compliant | 7,700 | |||
| C1206C102K1RACTU | INSTOCK | 5,000 | ||||
| RC1206JR-0727KL | YAGEO Corporation | INSTOCK RoHS : Compliant | 4,880 | |||
| RC1206FR-07150RL | YAGEO Corporation | INSTOCK RoHS : Compliant | 4,750 | |||
| RC1206FR-07200R | INSTOCK | 4,573 | ||||
| C1206C120J1GAC7800 | KEMET Corporation | INSTOCK RoHS : Compliant | 3,700 | |||
| 9C12063A1502FKHFT | YAGEO Corporation | INSTOCK RoHS : Compliant | 1,146 | |||
| RC1206FR-07 4K12 | Vishay Vitramon | INSTOCK | 1,000 | |||
| RC1206JR-0775RL | YAGEO Corporation | INSTOCK RoHS : Compliant | 400 | |||
| RC1206JR-071R1L | YAGEO Corporation | INSTOCK RoHS : Compliant | 341 | |||
| RC1206FR-073K | YAGEO Corporation | INSTOCK RoHS : Compliant | 226 | |||
 Avnet Asia | C1206X103K1RAC3204 | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.01 uF, 100 V, 1206 [3216 Metric], ? 10%, X7R, 3.3 mm, 1.6 mm (Alt: C1206X103K1RAC3204) RoHS : Compliant |
| 60,000 | |
| VC120648D101RP | Kyocera AVX Components | (Alt: VC120648D101RP) RoHS : Compliant | 20,000 | |||
| C1206C106K4RAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 10 uF, 16 V, 1206 [3216 Metric], ? 10%, X7R, C Series (Alt: C1206C106K4RAC7800) RoHS : Compliant |
| 16,000 | ||
| C1206C104K1RACTU | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 0.1 uF, 100 V, 1206 [3216 Metric], ? 10%, X7R, C Series (Alt: C1206C104K1RACTU) RoHS : Compliant |
| 12,000 | ||
| C1206X102JARACTU | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 1000 pF, 250 V, 1206 [3216 Metric], ? 5%, X7R, 3.3 mm, 1.6 mm (Alt: C1206X102JARACTU) RoHS : Compliant |
| 12,000 | ||
| VC120642L800RP | Kyocera AVX Components | (Alt: VC120642L800RP) RoHS : Compliant | 10,000 | |||
| C1206X475K5RAC7800 | KEMET Corporation | KEMC1206X475K5RAC7800 4.70UF 50.0V (Alt: C1206X475K5RAC7800) RoHS : Compliant |
| 10,000 | ||
| C0603C120J3GACTU | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 12 pF, 25 V, 0603 [1608 Metric], ? 5%, C0G / NP0, C Series (Alt: C0603C120J3GACTU) RoHS : Compliant |
| 8,000 | ||
| C1206C100K5GAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 10 pF, 50 V, 1206 [3216 Metric], ? 10%, C0G / NP0, C Series (Alt: C1206C100K5GAC7800) RoHS : Compliant |
| 4,000 | ||
| C0805C120JAGAC7800 | KEMET Corporation | (Alt: C0805C120JAGAC7800) RoHS : Compliant |
| 4,000 | ||
| T55D106M035C120IV | Vishay Intertechnologies | (Alt: T55D106M035C120IV) RoHS : Compliant | 2,500 | |||
| UF4C120070K3S | onsemi | (Alt: UF4C120070K3S) RoHS : Compliant |
| 1,200 | ||
| C1206C120K5GACTU | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 12 pF, 50 V, 1206 [3216 Metric], ? 10%, C0G / NP0, 3.2 mm, 1.6 mm (Alt: C1206C120K5GACTU) RoHS : Compliant | 0 | |||
| C1206C102K1RACTU | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 1000 pF, 100 V, 1206 [3216 Metric], ? 10%, X7R, C Series (Alt: C1206C102K1RACTU) RoHS : Compliant | 0 | |||
| C1206C106M9RAC7800 | KEMET Corporation | SMD Multilayer Ceramic Capacitor, 10 uF, 6.3 V, 1206 [3216 Metric], ? 20%, X7R, C Series (Alt: C1206C106M9RAC7800) RoHS : Compliant |
| 0 | ||
 Avnet Silica | PSMQC120N06LS1_R2_00201 | PanJit Semiconductor | C9V1TR13RoHS10KLL34ZENMELFZMM055SY0307051PJ (Alt: PSMQC120N06LS1_R2_00201) RoHS : Compliant | 3,000 | ||
| UF3C120040K4S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC35 mohm 1200V TO2474L (Alt: UF3C120040K4S) RoHS : Compliant | 390 | |||
| UF3SC120016K3S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC 16 mohm 1200V TO2473L (Alt: UF3SC120016K3S) RoHS : Compliant | 60 | |||
| UF3C120400K3S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC 410 mohm 1200V TO2473L (Alt: UF3C120400K3S) RoHS : Compliant | 30 | |||
MC12080DG | onsemi | 11 GHz Prescaler (Alt: MC12080DG) RoHS : Compliant | 0 | |||
| MC12093DG | onsemi | 2 4 8 11 GHz Low Power Prescaler (Alt: MC12093DG) RoHS : Compliant | 0 | |||
| MC12080DR2G | onsemi | 11 GHz Prescaler (Alt: MC12080DR2G) RoHS : Compliant | 0 | |||
| UF3C120080K3S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC 80 mohm 1200V TO2473L (Alt: UF3C120080K3S) RoHS : Compliant | 0 | |||
| UF3C120150K4S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC 150 mohm 1200V TO2474L (Alt: UF3C120150K4S) RoHS : Compliant | 0 | |||
| UF3SC120009ZW | Qorvo | SiC FET (Alt: UF3SC120009ZW) RoHS : Compliant | 0 | |||
| UG3SC120009K4S | onsemi | Silicon Carbide SiC Combo JFET EliteSiC 88 mohm 1200V TO2474L (Alt: UG3SC120009K4S) RoHS : Compliant | 0 | |||
| APTMC120AM25CT3AG | Microchip Technology Inc | (Alt: APTMC120AM25CT3AG) RoHS : Compliant | 0 | |||
| APTMC120TAM17CTPAG | Microchip Technology Inc | (Alt: APTMC120TAM17CTPAG) RoHS : Compliant | 0 | |||
| DSC1203DL2-100M0000 | Microchip Technology Inc | (Alt: DSC1203DL2-100M0000) RoHS : Compliant | 0 | |||
| 1500 C-120C COLOR BAREBOARD | Allied Vision Technologies GmbH | ONSEMI AR0135CS color 13 1280x960 CMOS GS Bareboard 52fps CSI2 26x26x7mm 10g (Alt: 11496) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AISC-1206-33NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-1206-R27J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-15NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-1R2J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-82NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-18NJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-R68K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASFLMPC-12.000MHZ-LR-T | Abracon Corporation | MEMS OSC XO 12.0000MHZ CMOS SMD RoHS : Compliant |
| 0 | ||
| AISC-1206-R82K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASGTX-C-120.000MHZ-1-T2 | Abracon Corporation | XTAL OSC VCTCXO 120.0000MHZ LVCM RoHS : Compliant |
| 0 | ||
| AISC-1206-R12J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-R33G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AM15C-1203SZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AISC-1206-10NJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-47NJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Chip-Germany GmbH | C1206C333KCRACAUTO | KEMET Corporation | RoHS : Compliant | 14,390 | ||
| C1206C562J5GACTU | KEMET Corporation | RoHS : Compliant | 8 | |||
 Component Electronics, Inc | RC1206F1821 | Synton-Tech Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 10,000 | |
| RC1206FR-07237R | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 9,800 | ||
| C1206C152K5GAC7800 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 6,400 | ||
| RC1206FR-07237R | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant | 5,000 | |||
| RC1206FR-072K61 | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,800 | ||
| RC1206FR-0768RL | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,800 | ||
| RC1206JR-071M6L | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,800 | ||
| 9C12063A5621FKRFT | YAGEO Corporation | IN STOCK SHIP TODAY |
| 4,700 | ||
| 9C12063A5621FKRFT | Philips Semiconductors | IN STOCK SHIP TODAY |
| 2,000 | ||
| RC1206FR-07200R | IN STOCK SHIP TODAY |
| 1,000 | |||
| 9C12063A9311FKRFT | Philips Semiconductors | IN STOCK SHIP TODAY |
| 575 | ||
| 9C12063A3304FKHFT | Philips Semiconductors | IN STOCK SHIP TODAY |
| 300 | ||
| 9C12063A39R2FKHFT | Philips Semiconductors | IN STOCK SHIP TODAY |
| 260 | ||
| 9C12063A5600JLHFT | Philips Semiconductors | IN STOCK SHIP TODAY |
| 190 | ||
| C1206C105M4VAC7800 | KEMET Corporation | IN STOCK SHIP TODAY |
| 100 | ||
 DB Roberts | C-120-6 | Shercon Inc | (1000/BAG) |
| 17 | |
| C-120-12 | Shercon Inc | 0 | ||||
| BHC-12-01 | Essentra Components | CB SptBlnd Hl MntNat3/4 in Spc CB Spt Blnd Hole Mnt Natural | 0 | |||
| C-120-10 | Shercon Inc | 0 | ||||
| MFFC-120 | Essentra Components | 0 | ||||
| E3-C120-05 | Southco | E3-C120-05 | 0 | |||
| HURC1-2-01 | Essentra Components | ClampHalf UArrow MntNatural1/8 in Clamp Half U Arrow Mnt Nat | 0 | |||
| T4184-8C120 | HeliCoil | H-C M8X1.25 SL TANGLESS | 0 | |||
| MFGC-120 | Essentra Components | 0 | ||||
| E3-C120-01 | Southco | E3-C120-01 | 0 | |||
| HC12076A | Essentra Components | HOOK - C STYLESPRING STEEL | 0 | |||
| MFC120A | Essentra Components | .314-.354 RANGE-FIN CAPLDPE NA | 0 | |||
| RLCBSC-12-01 | Essentra Components | CB SptReverse MntNatural12MM Spc | 0 | |||
| WCC1-2-01 | Essentra Components | 0 | ||||
| MDH-PC1200 | Sugatsune Kogyo Co Ltd | CFRP LARGE HANDLE | 0 | |||
 Flip Electronics | MT9M114D00STCZK24BC1-200 | onsemi | Stock, Ship Today |
| 28,696 | |
| UF3C120080B7S-D | onsemi | Stock, Ship Today | 5,600 | |||
| MC12093DG | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,176 | ||
| UF3SC120016K3S | onsemi | Stock, Ship Today RoHS : Compliant |
| 600 | ||
| NXH35C120L2C2S1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 520 | ||
| GBPC12005 | onsemi | Stock RoHS : Compliant | 230 | |||
| GBPC1202W | onsemi | Stock, Ship Today RoHS : Compliant |
| 200 | ||
| GBPC1204W | onsemi | Stock, Ship Today RoHS : Compliant |
| 150 | ||
| MC12080DG | onsemi | Stock, Ship Today RoHS : Compliant |
| 98 | ||
| LCC120 | Littelfuse Inc | Stock RoHS : Compliant | 50 | |||
| NXH35C120L2C2ESG | onsemi | Stock, Ship Today RoHS : Compliant |
| 44 | ||
| NXH25C120L2C2SG | onsemi | Stock, Ship Today RoHS : Compliant |
| 36 | ||
| GBPC1208W | onsemi | Stock, Ship Today RoHS : Compliant |
| 35 | ||
| NXH50C120L2C2ESG | onsemi | Stock, Ship Today RoHS : Compliant |
| 18 | ||
| NXH35C120L2C2SG | onsemi | Stock, Ship Today RoHS : Compliant |
| 2 | ||
 Pasternack Enterprises US | PE3TC1202-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-SF200LL75, RF Cable Type: PE-SF200LL75, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm F Male to 75 Ohm F Male Low Frequency Cable 36 Inch Length Using 75 Ohm PE-SF200LL75 Coax, RoHS., Radio frequency assembly 75 Ohm F male to 75 Ohm F male low frequency cable 36 inch length using 75 Ohm PE-SF200LL75 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 75 Ohm F male to 75 Ohm F male low frequency cable 36 inch length using 75 Ohm PE-SF200LL75 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to type F cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with F type cable connection on one end and type F cable connection on the other. Our low loss type F to F type cable assemblies have a male gender on end 1 and male on end 2. This F type to type F cable is a male to male coax assembly, PE3TC1202-36, can also be known as a low loss type F plug to type F plug cable assembly and will be shipped same-day as it is purchased. Type F plug to F type plug cable assembly PE3TC1202-36 is built with PE-SF200LL75 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to type F cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency F type male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss F type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to type F cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male low frequency cable 36 inch length using 75 Ohm PE-SF200LL75 coax, RoHS. |
| 54 | |
| PE3TC1205-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-SF200LL75, RF Cable Type: PE-SF200LL75, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm N Male to 75 Ohm F Male Low Frequency Cable 24 Inch Length Using 75 Ohm PE-SF200LL75 Coax, RoHS., Radio frequency assembly 75 Ohm N male to 75 Ohm F male low frequency cable 24 inch length using 75 Ohm PE-SF200LL75 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 75 Ohm N male to 75 Ohm F male low frequency cable 24 inch length using 75 Ohm PE-SF200LL75 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to F type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type F cable connection on the other. Our low loss N type to type F cable assemblies have a male gender on end 1 and male on end 2. This type N to type F cable is a male to male coax assembly, PE3TC1205-24, can also be known as a low loss type N plug to F type plug cable assembly and will be shipped same-day as it is purchased. N type plug to type F plug cable assembly PE3TC1205-24 is built with PE-SF200LL75 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency type N male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3TC1205-24 can also be used in the other direction and will be type F male to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male low frequency cable 24 inch length using 75 Ohm PE-SF200LL75 coax, RoHS. |
| 27 | ||
| PE3TC1203-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-SF200LL75, RF Cable Type: PE-SF200LL75, RF Cable Impedance: 75 Ohm, Length: 72 inches. 75 Ohm F Male to 75 Ohm F Female Low Frequency Cable 72 Inch Length Using 75 Ohm PE-SF200LL75 Coax, RoHS., Radio frequency assembly 75 Ohm F male to 75 Ohm F female low frequency cable 72 inch length using 75 Ohm PE-SF200LL75 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 75 Ohm F male to 75 Ohm F female low frequency cable 72 inch length using 75 Ohm PE-SF200LL75 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom F type to type F cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our low loss F type to type F cable assemblies have a male gender on end 1 and female on end 2. This F type to type F cable is a male to female coax assembly, PE3TC1203-72, can also be known as a low loss type F plug to type F jack cable assembly and will be shipped same-day as it is purchased. Type F plug to F type jack cable assembly PE3TC1203-72 is built with PE-SF200LL75 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to F type cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency type F male to type F female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3TC1203-72 can also be used in the other direction and will be F type female to type F male cable assembly if the opposite connectivity is required. Low loss F type plug to type F jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to type F cable assembly for quick shipment worldwide. Variations of F type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F female low frequency cable 72 inch length using 75 Ohm PE-SF200LL75 coax, RoHS. |
| 16 | ||
| PE3C1203-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male Right Angle to SMA Male Right Angle Cable 48 Inch Length Using PE-P141 Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 48 inch length using PE-P141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable 48 inch length using PE-P141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C1203-48, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1203-48 is built with PE-P141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 48 inch length using PE-P141 coax. |
| 0 | ||
| PE3C1209-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 60 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable 60 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209-60 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209-60 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 60 inch length using LMR-195 coax. |
| 0 | ||
| PE3C1205 | Pasternack Enterprises | 0 | ||||
| PE3C1201 | Pasternack Enterprises | 0 | ||||
| PE3C1209LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Male Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3C1209LF/HS is a SMA female bulkhead to SMA male cable using LMR-195 coax. This Pasternack SMA female bulkhead to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1209LF/HS SMA female bulkhead to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C1209/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female Bulkhead to SMA Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1209/HS-36 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1209/HS-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3C1209/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1209/HS-36 can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1203-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male Right Angle to SMA Male Right Angle Cable 36 Inch Length Using PE-P141 Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 36 inch length using PE-P141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable 36 inch length using PE-P141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C1203-36, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1203-36 is built with PE-P141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 36 inch length using PE-P141 coax. |
| 0 | ||
| PE3C1209/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Female Bulkhead to SMA Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1209/HS-24 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1209/HS-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3C1209/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1209/HS-24 can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1209LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 36 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 36 inch length using LMR-195 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable 36 inch length using LMR-195 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209LF-36 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209LF-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209LF-36 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 36 inch length using LMR-195 coax, LF solder. |
| 0 | ||
| PE3C1209/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Male Low Loss Cable Using LMR-195 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA bulkhead cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1209/HS can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1209/HS RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our bulkhead SMA female to SMA male cable has a maximum VSWR of 1.4:1. SMA jack to SMA plug cable assembly PE3C1209/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1209/HS can also be used in the other direction and will be a SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C1200 | Pasternack Enterprises | 0 | ||||
| PE3C1209-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 24 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female bulkhead low loss cable 24 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C1209-24 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C1209-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1209-24 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 24 inch length using LMR-195 coax. |
| 0 | ||
 Venkel Ltd. | C1206C0G500-103KNP | VENKEL LTD | Chip Capacitor;1206;C0G;50V;0.01uF;�10% RoHS : Compliant | 72,000 | ||
| C1206C0G500-100DNP | VENKEL LTD | Chip Capacitor;1206;C0G;50V;10pF;�0.5pF RoHS : Compliant | 28,000 | |||
| C1206C0G101-102FNE | VENKEL LTD | Chip Capacitor;1206;C0G;100V;1000pF;�1% RoHS : Compliant | 0 | |||
| C1206C0G101-510JNP | VENKEL LTD | Chip Capacitor;1206;C0G;100V;51pF;�5% RoHS : Compliant | 0 | |||
| C1206C0G101-560FNE | VENKEL LTD | Chip Capacitor;1206;C0G;100V;56pF;�1% RoHS : Compliant | 0 | |||
| C1206C0G101-681KNP | VENKEL LTD | Chip Capacitor;1206;C0G;100V;680pF;�10% RoHS : Compliant | 0 | |||
| C1206C0G101-9R1CNE | VENKEL LTD | Chip Capacitor;1206;C0G;100V;9.1pF;�0.25pF RoHS : Compliant | 0 | |||
| C1206C0G201-102KNE | VENKEL LTD | HV Chip Capacitor;1206;C0G;200V;1000pF;�10% RoHS : Compliant | 0 | |||
| C1206C0G201-472JNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;200V;4700pF;�5% RoHS : Compliant | 0 | |||
| C1206C0G202-331JNE | VENKEL LTD | HV Chip Capacitor;1206;C0G;2000V;330pF;�5% RoHS : Compliant | 0 | |||
| C1206C0G250-222GNP | VENKEL LTD | Chip Capacitor;1206;C0G;25V;2200pF;�2% RoHS : Compliant | 0 | |||
| C1206C0G251-150JNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;250V;15pF;�5% RoHS : Compliant | 0 | |||
| C1206C0G302-100JNP | VENKEL LTD | HV Chip Capacitor;1206;C0G;3000V;10pF;�5% RoHS : Compliant | 0 | |||
| C1206C0G500-102JNR | VENKEL LTD | Chip Capacitor;1206;C0G;50V;1000pF;�5% RoHS : Compliant | 0 | |||
| C1206C0G500-153GNE | VENKEL LTD | Chip Capacitor;1206;C0G;50V;0.015uF;�2% RoHS : Compliant | 0 | |||
 Vyrian | AMC1203BPSAR | Texas Instruments | Analog Circuit, 1 Func, 1 Channel, CMOS, PDSO8 RoHS : Compliant | 9,767 | ||
| MT9P111D00STCK28AC1-200 | onsemi | CMOS Sensor, 15fps, 0.40-1.40V | 8,996 | |||
| C1206C512F5HACAUTO | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 50V, 1% +Tol, 1% -Tol, X8R, 15% TC, 0.0051uF, Surface Mount, 1206 | 8,275 | |||
MSC1200Y2PFBRG4 | Texas Instruments | Microcontroller, 8-Bit, FLASH, 8051 CPU, 33MHz, CMOS, PQFP48 RoHS : Compliant | 7,986 | |||
ADC12038CIWMX/NOPB | Texas Instruments | ADC, Successive Approximation, 12-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDSO28 RoHS : Compliant | 7,074 | |||
| MT5C1001S18AWC1-20 | Micron Technology Inc | Memory IC | 6,492 | |||
| MT5C2568S12DWC1-20 | Micron Technology Inc | Memory IC | 6,023 | |||
| PSD302C1-20J | STMicroelectronics | 5,450 | ||||
| HSMM-C120 | Broadcom Limited | RoHS : Compliant | 5,189 | |||
| G2R-2-SN-AC120(S) | OMRON Corporation | Power/Signal Relay, SPDT, Momentary, 900mW (Coil), 5A (Contact), 125VDC (Contact), AC Input, AC/DC Output, Socket Mount RoHS : Compliant | 4,927 | |||
| HSML-C120 | Broadcom Limited | RoHS : Compliant | 4,774 | |||
| D4C-1201 | OMRON Corporation | Snap Acting/Limit Switch, SPDT, Momentary, 4A, 30VDC, 4.8mm, Wire Terminal, Pin Plunger Actuator, Panel Mount RoHS : Compliant | 4,498 | |||
| ADC12030CIWM | National Semiconductor Corporation | ADC, Successive Approximation, 12-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDSO16 RoHS : Not Compliant | 4,400 | |||
| MC12080DG | onsemi | Prescaler, ECL Series, 1-Func, PDSO8 RoHS : Compliant | 3,792 | |||
| MT5C1189S11AWC1-20 | Micron Technology Inc | Memory IC | 2,506 | |||
 Waytek, Inc. | LM-2C-120R/WLAT | NASON | Low Pressure Switch UL CSA 120 PSI SPDT Rising 18" UL3173 10A@125/250 250 VAC 5A@30VDC |
| 41 | |
 Win Source Electronics | IAUC120N04S6N013ATMA1 | Infineon Technologies AG | IAUC120N04S6N013ATMA1 RoHS : Compliant |
| 140,140 | |
| RC1206FR-07150KL | YAGEO Corporation | RES SMD 150K OHM 1% 1/4W 1206 RoHS : Compliant |
| 139,000 | ||
| CC1206JKNPOCBN102 | YAGEO Corporation | CAP CER 1000PF 1KV C0G/NPO 1206 / 1000 pF ±5% 1000V (1kV) Ceramic Capacitor C0G, NP0 1206 (3216 Metric) RoHS : Compliant |
| 127,740 | ||
| RC1206JR-07100RL | YAGEO Corporation | RES SMD 100 OHM 5% 1/4W 1206 RoHS : Compliant |
| 55,000 | ||
| CC1206KKX5R8BB106 | YAGEO Corporation | CAP CER 10UF 25V X5R 1206 RoHS : Compliant |
| 53,500 | ||
| RC1206FR-07150RL | YAGEO Corporation | RES SMD 150 OHM 1% 1/4W 1206 RoHS : Compliant |
| 50,000 | ||
| RC1206FR-076K8L | YAGEO Corporation | RES 6.8K OHM 1% 1/4W 1206 / 6.8 kOhms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film RoHS : Compliant |
| 17,220 | ||
| MC12080DR2 | onsemi | IC PRESCALER SGL 1.1GHZ 8-SOIC RoHS : Not Compliant |
| 15,022 | ||
| MC12080DR2G | onsemi | IC PRESCALER SGL 1.1GHZ 8-SOIC RoHS : Compliant |
| 10,000 | ||
| C1206C105K3RACTU | KEMET Corporation | CAP CER 1UF 25V X7R 1206 / Ceramic, Commercial-(CxxxxC), 1 uF, 10%, 25 V, 1206, X7R, SMD, MLCC, Temperature Stable, Class II RoHS : Compliant |
| 10,000 | ||
| AMC1202DWVR | Texas Instruments | PRECISION, 50-MV-INPUT, BASIC IS / Isolated IC DC/DC Converter 8-SOIC RoHS : Compliant |
| 7,000 | ||
| ADC12010CIVY | National Semiconductor Corporation | ADC, PROPRIETARY METHOD, 12-BIT, RoHS : Not Compliant |
| 4,820 | ||
ADC12010CIVY/NOPB | Texas Instruments | IC ADC 12BIT 10MSPS 32-LQFP RoHS : Compliant |
| 4,820 | ||
| MC12093DR2 | onsemi | IC PRESCALER 2/4/8 1.1GHZ 8-SOIC RoHS : Not Compliant |
| 401 | ||
| MC12080DG | onsemi | IC PRESCALER SINGLE 1.1GHZ 8SOIC RoHS : Compliant |
| 89 | ||
 Wuhan P&S | MMB02070C1209FB200 | Vishay Intertechnologies | Professional Thin Film MELF Resistors RoHS : Compliant |
| 142,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand