C1008F-R10K Price, nhà phân phối, Stock

1 : $499.04
5 : $494.04
10 : $489.04
25 : $484.04
50 : $484.04
100 : $484.04
250 : $484.04
500 : $484.04
1,000 : $484.04
2,500 : $484.04
10,000 : $484.04

SE2C1006-3.5-12R

SOURIAU-SUNBANK

Backshells & Ac

MTC100-JH1-P22

TE Connectivity

MTC Products
RoHS : Compliant

1 : $447.098
5 : $416.786
10 : $372.582
25 : $367.021
50 : $367.021
100 : $361.624
250 : $351.291
500 : $341.533
1,000 : $336.855
2,500 : $336.855
10,000 : $336.855

S8195-AC1002U4D

SOURIAU-SUNBANK

Connector Acc

420DS002C1001-3

Glenair Inc

Connector

02A312DC1-0015

TE Connectivity

Relays

19C100PA5L

Honeywell Sensing and Control

Sensor
RoHS : Compliant

1 : $1,049.691
5 : $1,049.691
10 : $874.743
25 : $706.523
50 : $706.523
100 : $644.547
250 : $592.568
500 : $592.568
1,000 : $592.568
2,500 : $592.568
10,000 : $592.568

MTC100-KT2-0155

TE Connectivity

MTC Products

1 : $3,465.546
5 : $3,230.594
10 : $2,887.955
25 : $2,844.851
50 : $2,844.851
100 : $2,803.015
250 : $2,722.929
500 : $2,647.292
1,000 : $2,611.028
2,500 : $2,611.028
10,000 : $2,611.028

MTC100-JB2-P14

TE Connectivity

Connector Acc
RoHS : Not Compliant

MTC100-KT2-0154

TE Connectivity

MTC Products
RoHS : Not Compliant

Flip Electronics

MC100EP05DG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $3.55

26,944

CY7C1361C-100AXET

Cypress Semiconductor

Stock, Ship Today
RoHS : Compliant

16,853

MC100EP35D

onsemi

Stock
RoHS : Not Compliant

13,720

MC100EP08DG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $5.07

11,760

CY7C1009D-10VXIT

Cypress Semiconductor

Stock, Ship Today
RoHS : Compliant

11,440

MC100EP01DTG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $3.84

8,325

MC100EL17DWG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $4.87

7,752

MC100EP196BFAG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $6.3

4,567

MC100LVEL17DWR2G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $1.68

4,000

MC100LVEL91DWG

onsemi

Stock
RoHS : Compliant

3,000

MC100LVEL56DWR2

onsemi

Stock
RoHS : Not Compliant

2,470

MC100LVEL56DW

onsemi

Stock
RoHS : Not Compliant

2,470

MICROFC-10035-SMT-TR1

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $13.13

800

MC100EP196BMNG

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $9.74

518

CY7C1007D-10VXI

Infineon Technologies AG

Stock, Ship Today

1 : $13.77

274

Pasternack Enterprises US

PE3C10076-9

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 3.5mm Male to TNC Male Cable 9 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to TNC male cable 9 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC male cable 9 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10076-9 can also be known as a 3.5mm plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to TNC plug cable assembly PE3C10076-9 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10076-9 can also be used in the other direction and will be TNC male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $203.99
25 : $193.79
50 : $183.59
100 : $175.43

PE3C10078-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 3.5mm Male to TNC Female Cable 18 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to TNC female cable 18 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC female cable 18 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C10078-18 can also be known as a 3.5mm plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to TNC jack cable assembly PE3C10078-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10078-18 can also be used in the other direction and will be TNC female to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements.

1 : $217.99
25 : $207.09
50 : $196.19
100 : $187.47

PE3C10092

Pasternack Enterprises

Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 3.5mm Female to N Male Right Angle Cable Using PE-SR402FL Coax., Radio frequency assembly 3.5mm female to N male right angle cable using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm female to N male right angle cable using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and right angle a type N cable connection on the other. Our a 3.5mm to right angle a type N cable assembly has female gender on end 1 and male on end 2. PE3C10092 can also be known as a 3.5mm jack to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm jack to type N plug cable assembly PE3C10092 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to right angle type N cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10092 can also be used in the other direction and will be right angle type N male to 3.5mm female cable assembly if the opposite connectivity is required. 3.5mm jack to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to type N cable assembly for quick shipment worldwide. Variations of 3.5mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to type N RF cable assembly as per your requirements.

PE3C100020/HS-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to MCX Plug Right Angle Cable 6 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA male to MCX plug right angle cable 6 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug right angle cable 6 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle MCX cable connection on the other. Our SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C100020/HS-6 can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100020/HS-6 RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. Our SMA male to right angle MCX plug cable has a maximum VSWR of 1.5:1. SMA plug to MCX male cable assembly PE3C100020/HS-6 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100020/HS-6 can also be used in the other direction and will be a right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX RF cable assembly as per your requirements.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

PE3C100090

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm. MHF1 to SMA Male Cable Assembly Using O.D. 0.81mm Cable., Pasternack’s PE3C100090 MHF1 to SMA male RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and an SMA cable connection on the other. PE3C100090 can also be known as an MHF1 to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.032-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.196 inches, allowing for a single bend without damaging the cable. Our PE3C100090 RF cable has an FEP jacket of 0.032-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 90 degrees C. This cable assembly has a typical propagation velocity of 69%. Our MHF1 to SMA male cable has a maximum VSWR of 1.5:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100090 can also be used in the other direction and will be an SMA plug to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements.

PE3C100091-20CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 7.87 inches. MHF1 to SMA Male Right Angle Cable Assembly Using O.D. 0.81mm Cable, length = 200mm., Pasternack’s PE3C100091-20CM MHF1 to right angle SMA male RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and a right angle SMA cable connection on the other. PE3C100091-20CM can also be known as an MHF1 to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.032-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.196 inches, allowing for a single bend without damaging the cable. Our PE3C100091-20CM RF cable has an FEP jacket of 0.032-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 90 degrees C. This cable assembly has a typical propagation velocity of 69%. Our MHF1 to right angle SMA male cable has a maximum VSWR of 1.55:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this 7.87-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100091-20CM can also be used in the other direction and will be a right angle SMA plug to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements.

1 : $14.99
25 : $14.39
50 : $13.94
100 : $13.64

PE3C100067-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.92mm Male to 2.92mm Female Low Loss Test Cable 36 Inch Length Using PE-TC154A Coax., Pasternack’s PE3C100067-36 low loss test 2.92mm male to 2.92mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100067-36 can also be known as a low loss test 2.92mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.92mm to 2.92mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100067-36 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.92mm male to 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C100067-36 2.92mm plug to 2.92mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100067-36 can also be used in the other direction and will be a 2.92mm jack to 2.92mm plug cable assembly if the opposite connectivity is required. This low loss test 2.92mm plug to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm low loss test RF cable assembly as per your requirements.

1 : $809.65
5 : $777.26
10 : $744.88
25 : $712.49

PE3C100066-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to 2.92mm Male Low Loss Test Cable 24 Inch Length Using PE-TC154A Coax., Pasternack’s PE3C100066-24 low loss test 2.92mm male to 2.92mm male RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100066-24 can also be known as a low loss test 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.92mm to 2.92mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100066-24 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This PE3C100066-24 2.92mm plug to 2.92mm plug cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm low loss test RF cable assembly as per your requirements.

1 : $720.95
5 : $692.11
10 : $663.27
25 : $634.44

PE3C100015-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Female Bulkhead to TNC Male Low Loss Space Cable 200 CM Length Using PE-R200LL Coax., Radio frequency assembly SMA female bulkhead to TNC male low loss space cable 200 cm length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to TNC male low loss space cable 200 cm length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA bulkhead cable connection on one end and a TNC cable connection on the other. Our low loss space SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C100015-200CM can also be known as a low loss space SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.562-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100015-200CM RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our bulkhead SMA female to TNC male cable has a maximum VSWR of 1.4:1. SMA jack to TNC plug cable assembly PE3C100015-200CM is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100015-200CM can also be used in the other direction and will be a TNC male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss space SMA jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss space RF cable assembly as per your requirements.

1 : $605.0
10 : $580.8
25 : $556.6
100 : $532.4

PE3C10023-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male to 7/16 DIN Male Right Angle Low PIM Cable 36 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.3-10 male to 7/16 DIN male right angle low PIM cable 36 inch length using 1/4 inch superflexible coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 7/16 DIN male right angle low PIM cable 36 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3C10023-36 can also be known as a low PIM 4.3-10 plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10023-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 120 dB. Our 4.3-10 male to right angle 7/16 DIN male cable has a maximum VSWR of 1.323:1. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10023-36 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10023-36 can also be used in the other direction and will be a right angle 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3C10030/HS

Pasternack Enterprises

PE3C10047

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Bulkhead Cable Using LMR-195-UF Coax. PE3C10047 is a SMA female to SMA female bulkhead cable using LMR-195-UF coax. This Pasternack SMA female to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C10047 SMA female to SMA female bulkhead cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C10058/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini UHF Male to Mini UHF Female Low Loss Cable 12 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly mini UHF male to mini UHF female low loss cable 12 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The mini UHF male to mini UHF female low loss cable 12 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a mini UHF cable connection on one end and a mini UHF cable connection on the other. Our low loss mini UHF to mini UHF cable assembly has a male gender on end 1 and a female on end 2. PE3C10058/HS-12 can also be known as a low loss mini UHF plug to mini UHF jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10058/HS-12 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Mini UHF plug to mini UHF jack cable assembly PE3C10058/HS-12 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10058/HS-12 can also be used in the other direction and will be a mini UHF female to mini UHF male cable assembly if the opposite connectivity is required. Low loss mini UHF plug to mini UHF jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $58.99
10 : $57.81
25 : $56.63
100 : $55.45

PE3C10067/HS

Pasternack Enterprises

PE3C10007/HS

Pasternack Enterprises

C1008F-R10K nhà phân phối

Link URL