| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
9930-72-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | 0469930620 | Molex | CONN PLUG HSG 6POS 4.20MM RoHS : Compliant |
| 1,625 | |
| 9930 | INDUSTRIALSUPPLIES.COM | WRENCH SET 3/8"-1" 11PC |
| 354 | ||
| 25QHTF22-99.300-OE | Mercury Electronic Ind Co Ltd | 99.3 MHz XO 2.5V 2.5X2.0 MM OE |
| 250 | ||
| LF993006 | Wurth Elektronik | POWERELEMENT LF POWERONE SMD BUS RoHS : Compliant |
| 241 | ||
| 192993-0093 | PEI-GENESIS | TRI TNM 14 E/B SHIELD .551 OD |
| 36 | ||
| 9099-3-0-0 | Amphenol Positronic | CONTACT INSERTION TOOL |
| 18 | ||
| 323-D-AB-999-30.00-00-00 | Helix Linear Technologies | 300 Series Linear Slide |
| 10 | ||
| SMA-23D5-N-W37999-30.00-SE-R-00 | Helix Linear Technologies | Non-captive Stepper Motor Linear |
| 10 | ||
| SMA-14S5-N-025999-3.00-ME-E500-A | Helix Linear Technologies | Non-captive Stepper Motor Linear |
| 10 | ||
| 09930060401 | HARTING Technology Group | HAN ORV3 POWER 6+PE HOOD 15-17 M RoHS : Compliant |
| 6 | ||
| 114993078 | Seeed Development Ltd | SENSECAP S2107 TEMP SENSOR PT100 |
| 5 | ||
| 2439930000 | Weidmüller Interface GmbH & Co. KG | TERM BLOCK HDR 4POS 2.50MM RoHS : Compliant |
| 3 | ||
| 114993069 | Seeed Development Ltd | SENSECAP INDICATOR D1S ESP32S3 |
| 2 | ||
| 2439930000 | Weidmüller Interface GmbH & Co. KG | TERM BLOCK HDR 4POS 2.50MM RoHS : Compliant |
| 1 | ||
| 9930 | 3M Interconnect | PERFORMANCE PNEUMATIC APPLICATOR | 0 | |||
![]() Avnet Americas | 46993-0211 | Molex | Connector Housing, Plug, 2 Contacts, 2 Rows, 4.2 mm, 46993 Series, Nylon, Mini-Fit Jr., Black - Bulk (Alt: 0469930211) RoHS : Compliant |
| 1,000 | |
| ATS-EXL99-300-R0 | Advanced Thermal Solutions Inc | - Boxed Product (Development Kits) (Alt: ATS-EXL99-300-R0) RoHS : Compliant |
| 8 | ||
| ASP-109993-03 | Samtec Inc | - Rail/Tube (Alt: ASP-109993-03) RoHS : Compliant | 7 | |||
| 192993-0082 | ITT Interconnect Solutions | - Bulk (Alt: 192993-0082) RoHS : Compliant |
| 7 | ||
| 848549-9300 | Molex | - Bulk (Alt: 0848549300) |
| 0 | ||
| M85049/9-30N | Glenair Inc | Environmental Backshell for MIL-DTL-26482 Series II/MIL-DTL-83723 Series I & III/PAN 6432-1 Circula - Bulk (Alt: M85049/9-30N) RoHS : Not Compliant |
| 0 | ||
| M85049/9-30N | Amphenol Corporation | - Bulk (Alt: A85049930N) RoHS : Compliant |
| 0 | ||
| 999301 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 999301) RoHS : Not Compliant | 0 | |||
| 6489930-7 | TE Connectivity | - Bulk (Alt: 6489930-7) RoHS : Compliant | 0 | |||
| 993067-4 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 993067-4) RoHS : Compliant | 0 | |||
| 7010299308 | 3M Interconnect | SURFACE CONDITIONING SCRIM BACKED BELT, - Bulk (Alt: 7010299308) RoHS : Not Compliant |
| 0 | ||
| 2009930000 | Weidmüller Interface GmbH & Co. KG | SFX 9/24 S MC NE WS V0 - Bulk (Alt: 2009930000) RoHS : Not Compliant |
| 0 | ||
| 03560993-000 | TE Connectivity | - Bulk (Alt: 03560993-000) RoHS : Not Compliant | 0 | |||
| 1349930030 | Weidmüller Interface GmbH & Co. KG | Cable Assembly PVC LiYCY 3m 37 Position D-Subminiature to 37 Position D-Subminiature Receptacle-Rec - Bulk (Alt: 1349930030) RoHS : Not Compliant |
| 0 | ||
| 2439930000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 2439930000) RoHS : Compliant |
| 0 | ||
![]() Newark | 46993-0820 | Molex | CONN HOUSING, PLUG, 8POS, 4.2MM, RED; Product Range:Mini-Fit Versa Color 46993 Series; Gender:Plug; No. of Positions:8Positions; Pitch Spacing:4.2mm; For Use With:Molex Mini-Fit 5558 Series Male Crimp Terminals RoHS Compliant: Yes RoHS : Compliant |
| 2,000 | |
| 46993-0820 | Molex | CONN HOUSING, PLUG, 8POS, 4.2MM, RED; RoHS : Compliant |
| 1,945 | ||
| 09930011501 | HARTING Technology Group | HEAVY DUTY HOOD, 1 LEVER, PA; Heavy Duty Connector Type:Hood; Connector Body Material:Nylon (Polyamide) Body; Locking Type:1 Lever; Rectangular Shell Size:-; For Use With:Harting Han S Series Heavy Duty Connectors RoHS Compliant: Yes RoHS : Compliant |
| 502 | ||
| 09930005401 | HARTING Technology Group | HAN S200 HOUSING PLASTIC PROTECTION COVER ROHS COMPLIANT: YES RoHS : Compliant |
| 500 | ||
| 09930005402 | HARTING Technology Group | PROTECTION COVER, SCREW/BULKHEAD MOUNT; Accessory Type:Protection Cover; For Use With:Harting Han S Series Screw/Bulkhead Mount Housings; Connector Body Material:-; Product Range:Han S Series RoHS Compliant: Yes RoHS : Compliant |
| 100 | ||
| 09930011309 | HARTING Technology Group | HEAVY DUTY BASE, BULKHEAD, 1 LEVER, PA; Heavy Duty Connector Type:Base, Bulkhead Mount; Connector Body Material:Nylon (Polyamide) Body; Locking Type:1 Lever; Rectangular Shell Size:-; Product Range:Han S Series RoHS Compliant: Yes RoHS : Compliant |
| 100 | ||
| 09930011304 | HARTING Technology Group | HEAVY DUTY BASE, BULKHEAD, 1 LEVER, PA; Heavy Duty Connector Type:Base, Bulkhead Mount; Connector Body Material:Nylon (Polyamide) Body; Locking Type:1 Lever; Rectangular Shell Size:-; Product Range:Han S Series RoHS Compliant: Yes RoHS : Compliant |
| 98 | ||
| 09930060401 | HARTING Technology Group | HEAVY DUTY HOOD, RCPT, SIDE, 6+PE, 32A; RoHS : Compliant |
| 86 | ||
| M85049/93-06 | Glenair Inc | CONN CLAMP, 6, 9.7MM, THERMOPLASTIC; RoHS : Compliant |
| 64 | ||
| 46993-0810 | Molex | CONNECTOR HOUSING, PLUG, 8POS; (Alternate Part Number: 887191639116 RoHS : Compliant |
| 63 | ||
| RPC1299-30 | Astrodyne TDI Power Supplies & EMI Filters | FILTER, 2-STAGE, 30A, 75VDC, TH; Filter Applications:General Purpose; Voltage Rating:75VDC; Current Rating:30A; No. of Phases:-; No. of Stages:2 Stage; Filter Input Terminals:PC Pins; Filter Output Terminals:PC Pins RoHS Compliant: Yes RoHS : Compliant |
| 11 | ||
| 09930010126 | HARTING Technology Group | HEAVY DUTY BASE, 1 LEVER, 1POS, RED/YEL; RoHS : Compliant |
| 8 | ||
| 09930010322 | HARTING Technology Group | HEAVY DUTY BASE, 1 LEVER, 1POS, RED/YEL; RoHS : Compliant |
| 8 | ||
| 61-9930.4 | EAO AG | BEZEL, PB/KEYLOCK SW, FLUSH, 24X24MM; For Use With:EAO 61 Series Pushbutton Switches; Product Range:61 Series RoHS Compliant: Yes RoHS : Compliant |
| 3 | ||
| TR00015993-000 | TR Fastenings | SET SCREW, HEX SOCKET, M6 X 40MM, SS A2; RoHS : Compliant |
| 1 | ||
![]() RS | 09930005401 | HARTING Technology Group | HAN S200 HOUSING PLASTIC PROTECTION COVER RoHS : Compliant |
| 500 | |
| 09930007264 | HARTING Technology Group | HAN S CRIMP CONTACT, FEMALE, ANGLED, 50MM (1/0AWG) RoHS : Compliant |
| 500 | ||
| 09930011501 | HARTING Technology Group | HAN S 120 HOOD, ANGLED, BLACK, 10-25MM RoHS : Compliant |
| 498 | ||
| 61-9930.0 | EAO AG | ACCESSORY, FRONT BEZEL SET, INDICATORS+SWITCH, FLUSH, SQUARE,24X24MM, PLASTIC, BLACK RoHS : Compliant |
| 402 | ||
| 09930005402 | HARTING Technology Group | HAN S 120 HOUSING PLASTIC PROTECTION COVER RoHS : Compliant |
| 100 | ||
| 09930011309 | HARTING Technology Group | HAN S 120 BULKHEAD MOUNT HOUSING, BLUE, M18, W- MALE CONTACT BUSBAR RoHS : Unknown |
| 100 | ||
| 09930010322 | HARTING Technology Group | HAN S BULKHEAD MOUNT HOUSING, RED, M20, W/ MALE CONTACT M8 RoHS : Compliant |
| 100 | ||
| 09930011304 | HARTING Technology Group | HAN S 120 BULKHEAD MOUNT HOUSING, RED, M18, W- MALE CONTACT BUSBAR RoHS : Compliant |
| 98 | ||
| 192993-0014 (TNM6S160019P1L) | ITT Interconnect Solutions | ITT CANNON, 19 POLE CABLE MOUNT CONNECTOR PLUG, MALE CONTACTS |
| 33 | ||
| 1SNA299304R1500 (029930415) | TE Connectivity | TERMINAL BLOCK ACCESSORY, BLACK PROTECTION COVER, CPFIC5/24, 5.08 MM, DIN RAIL |
| 29 | ||
| TNM6S14-0304P1L (192993-0695) | ITT Interconnect Solutions | CONN CIRC SEALED PLUG SZ14 4 SIGNAL & 3POWER PIN IP67 METAL TNM SER W/SEAL NUT |
| 20 | ||
| 09930009940 | HARTING Technology Group | HAN S 200 SPARE UP LEVER RoHS : Compliant |
| 10 | ||
| RPC1299-30 | Astrodyne TDI Power Supplies & EMI Filters | PCB MOUNT DUAL STAGE DC FILTER RoHS : Compliant |
| 4 | ||
| 8495969.9302.02400 | Norgren | VALVE, SOLENOID, 24V, BUSCHJOST |
| 1 | ||
| 9930 | Fluke Calibration | SOFTWARE, INTERFACE-IT |
| 0 | ||
![]() Microchip Technology Inc | HV9930LG-G | Microchip Technology Inc | HYSTERIC BOOST-BUCK (CUK) LED DRIVER IC, SOIC, Projected EOL: 2035-10-14 RoHS : Compliant |
| 6,600 | |
| HV9930DB1 | Microchip Technology Inc | HV9930DB1 Demo Board, Projected EOL: |
| 40 | ||
| HV9930DB2 | Microchip Technology Inc | HV9930DB2 Demo Board, Projected EOL: |
| 22 | ||
| 148-01993-000 | Microchip Technology Inc | IC FPGA SMARTFUSION2 90K LOGIC BGA-484 ROHS FASTER SPEED INDUSTRIAL TEMP, Projected EOL: 2051-07-28 - Contact for Pricing | 0 | |||
![]() Rochester Electronics | TPS79930DDCR![]() | Texas Instruments | Fixed Positive LDO Regulator, 3V, 0.175V Dropout, BICMOS, PDSO5 RoHS : Compliant |
| 50 | |
TPS79930YZUR![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 3V 200mA 5-BGA T/R RoHS : Compliant |
| 667,998 | ||
TPS79930YZUT![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 3V 200mA 5-BGA T/R RoHS : Compliant |
| 435 | ||
CY7B9930V-5AXC![]() | Cypress Semiconductor | PLL Based Clock Driver, 7B Series, 8 True Output(s), PQFP44 RoHS : Compliant |
| 957 | ||
| JD9930BCA | National Semiconductor Corporation | Dual marked (JM38510/03001BCA) RoHS : Not Compliant |
| 202 | ||
![]() Sager | FFA.99.300.60GJ | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET |
| 0 | |
| 0899306 | Phoenix Contact | E PX A 75X190X56 JUNCTION BOX MATERIAL: GLASS-FIBER-REINFORCED POLYESTER WITH ADDED GRAPHITE BLACK 75 MM X 190 MM X 56 MM TYPE OF LOCKING: SCREW-ON COVER | 0 | |||
| 0469930620 | Molex | Headers & Wire Housings MINIFIT JR PLUG GW V-2 06CKT RoHS : Compliant |
| 0 | ||
| 0899307 | Phoenix Contact | E PX A 75X190X75 JUNCTION BOX MATERIAL: GLASS-FIBER-REINFORCED POLYESTER WITH ADDED GRAPHITE BLACK 75 MM X 190 MM X 75 MM TYPE OF LOCKING: SCREW-ON COVER | 0 | |||
| 03560993-000 | TE Connectivity | Thick Film Resistors - SMD LVDT XS 751-2744 | 0 | |||
| 0469930450 | Molex | Headers & Wire Housings MINIFITJR PLUG W/EARS DR GW 04CKT NAT V0 RoHS : Compliant |
| 0 | ||
| CL8993-000 | TE Connectivity | TE Connectivity TX15AB90-2418 | 0 | |||
| 2299301 | Phoenix Contact | Ribbon Cables / IDC Cables FLK 16/EZ-DR/1 00/KONFEK RoHS : Compliant |
| 0 | ||
| 0469930830 | Molex | Headers & Wire Housings MINIFIT JR PLUG GW V-2 08CKT RoHS : Compliant |
| 0 | ||
| AAE1993-00 | TE Connectivity | TE Connectivity 91H3-25-10-1-C-SL-HE200 | 0 | |||
| 99-29999-307 | Lumasense Technologies Inc | HEX NUT PLACED ON INTERNAL CONNECTION OF FIBER OPTIC PROBES |
| 0 | ||
| AAA9930-00 | TE Connectivity | TE Connectivity 91F1-18-06-1-C-HE100 RoHS : Compliant | 0 | |||
| 993085-2 | TE Connectivity | CONNECTOR,PUSH-IN,STRAIGHT,MALE,EXT HEX |
| 0 | ||
| 0469930820 | Molex | Headers & Wire Housings MINIFIT JR PLUG GW V-2 08CKT RoHS : Compliant |
| 0 | ||
| 0799300005 | Molex | Modular Connectors / Ethernet Connectors | 0 | |||
![]() TME | 16012-9930 | Breve Tufvassons sp z o o | Transformer: encapsulated; 4VA; 400VAC; 12V; 333mA; PCB; IP00; TEZ |
| 106 | |
| 68999-3003 | Molex | 68999-3003 |
| 40 | ||
| 79930 | Goobay | USB coupler; Keystone; USB A socket,USB B socket; USB 2.0; white |
| 19 | ||
| 09930011329 | HARTING Technology Group | Connector: DC supply; socket; male; Inom: 120A; 1.5kV; PIN: 1; screw RoHS : Compliant |
| 2 | ||
| 09930011126 | HARTING Technology Group | Connector: DC supply; socket; male; Inom: 120A; 1.5kV; PIN: 1; screw RoHS : Compliant |
| 1 | ||
| 9930 0131000 | Belden Inc | Wire; stranded; Cu; 30AWG; PVC; dark blue; 300V; 305m; 1x30AWG |
| 0 | ||
| 09-93-0500 | Molex | Connector: wire-board; socket; female; PIN: 5; straight; crimped RoHS : Compliant |
| 0 | ||
| 09140009930 | HARTING Technology Group | Connector: HAN; module; male; 5A; 50V; Han Modular D-Sub; straight RoHS : Compliant |
| 0 | ||
| 1989930000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; A; 20A; 500V; push-in; beige; wemid; L: 37.7mm RoHS : Compliant |
| 0 | ||
| 19993032 | KING TONY | Wrench; to wheels; Spanner: 30mm,32mm; L: 400mm |
| 0 | ||
| PKS-299 305 130 A 1702 B | Ingun Prufmittelbau GmbH | Test probe: pneumatic; 3A; Ø: 1.3mm; Contacts: CuBe; 1.7N; plug-in |
| 0 | ||
| T-899 305 060 450 150A1002M | Ingun Prufmittelbau GmbH | Test probe: screw-in; 5A; Ø: 0.6mm; T-899; Contacts: CuBe; 1N |
| 0 | ||
| T-899 305 065 330 150A1502M | Ingun Prufmittelbau GmbH | Test probe: screw-in; 5A; Ø: 0.65mm; T-899; Contacts: CuBe; 1.5N |
| 0 | ||
| T-899 305 065 350 150A3002M | Ingun Prufmittelbau GmbH | Test probe: screw-in; 5A; Ø: 0.65mm; Contacts: CuBe; 3N; screw-in |
| 0 | ||
| T-899 305 065 400 150A1502MG | Ingun Prufmittelbau GmbH | Test probe: ICT/FCT; 5A; Ø: 0.65mm; Contacts: CuBe; 1.5N; screw-in |
| 0 | ||
![]() ComSIT USA | L9930 | STMicroelectronics | DUAL FULL BRIDGE Full Bridge Based MOSFET Driver, 0.38A, PZFM11 RoHS : Compliant | 27,000 | ||
| B59930C120A70Z15 | TDK Electronics | PTC THERMISTOR FOR OVERCURRENT PROTECTION PTC Thermistor, 1.65ohm, Through Hole Mount RoHS : Compliant | 390 | |||
![]() Interstate Connecting Components | 09930005401 | HARTING Technology Group | HAN S200 PLSTC HSG PROT COVR RoHS : Compliant |
| 125 | |
| 192993-0011 | ITT Interconnect Solutions | TNM6S10-0004P1L RoHS : Compliant |
| 36 | ||
| 09930005402 | HARTING Technology Group | PROT COVER FOR SCRW&BLKHD HSGS PLASTIC RoHS : Compliant |
| 25 | ||
| 9099-3-0-0 | Amphenol Positronic | Tools |
| 6 | ||
| M85049/9-30N | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| M85049/9-30N | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Env |
| 0 | ||
| A85049930X | Amphenol PCD | M850499-30X | 0 | |||
| D38999/30WE99CN | Amphenol Aerospace | MIL-DTL-38999 III (D38999) harsh environment connectors consist of wall mount receptacles jam nut receptacles and straight self-locking RFI plugs. They are offered in 9 shell sizes and 54 insert arrangements utilizing M39029 contacts in sizes 22D 20 | 0 | |||
| D38999/30WE35FA | Amphenol Aerospace | LANYARD REL PLUG W/SKT CONTACT | 0 | |||
| 9-6609930-5 | TE Connectivity | 9-6609930-5 PE000SH6B=C2409 RoHS : Compliant |
| 0 | ||
| 5-6609930-9 | TE Connectivity | Cross Referenced to TE CNTY CORCOM - Part: CORPE00XSSX0 RoHS : Compliant | 0 | |||
| 192993-0632 | ITT Interconnect Solutions | TNA12HSAD-00L RoHS : Compliant | 0 | |||
| 000L59930 | ITT Interconnect Solutions | VBN2204SNT39VO | 0 | |||
| 192993-0101 | ITT Interconnect Solutions | TNM6U14-0304S1L | 0 | |||
| 192993-0093 | ITT Interconnect Solutions | TNA14CC-SE01L RoHS : Compliant | 0 | |||
![]() PEI Genesis | 192993-0044-CGMSS4 | ITT Interconnect Solutions |
| 352 | ||
| 192993-0093 | ITT Interconnect Solutions | RoHS : Compliant |
| 36 | ||
| M85049/9-30N | SOURIAU-SUNBANK |
| 0 | |||
| M85049/9-30N | Amphenol PCD |
| 0 | |||
| ES6993-05 | SOURIAU-SUNBANK |
| 0 | |||
| 9099-3-0-0 | Amphenol Positronic |
| 0 | |||
| D38999/30WE35FA | Amphenol Corporation |
| 0 | |||
| 192993-0633 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 192993-0011 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| M85049/9-30B | SOURIAU-SUNBANK |
| 0 | |||
| 192993-0022 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| ES6993-03 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/93-06 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/93-06 | Amphenol PCD |
| 0 | |||
| D38999/30FE26SN | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 3529930001 | TE Connectivity | Connectors |
| 2,640 | |
| 291993-000 | TE Connectivity | CABLE-PROT PART (TE REF 291993-000) RoHS : Compliant |
| 729 | ||
| 10136993-001LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 157 | ||
| 6489930-2 | TE Connectivity | Card Edge Connectors RoHS : Compliant |
| 44 | ||
| 993083-4 | TE Connectivity | TE COMPONENT (REF 993083-4) |
| 36 | ||
| 9099-3-0-0 | Amphenol Positronic | Accessory |
| 34 | ||
| 09060009930 | HARTING Technology Group | DIN 41612 Connectors DINPWR LK LEVER RoHS : Compliant |
| 24 | ||
| M85049/9-30S | Glenair Inc | ACCESSORIES - ENVIRONMENTAL ADAPTER |
| 21 | ||
| M85049/9-30Z | Glenair Inc | ACCESSORIES - ENVIRONMENTAL ADAPTER |
| 14 | ||
| 5-6609930-9 | TE Connectivity | TE COMPONENT (REF 5-6609930-9) RoHS : Compliant |
| 13 | ||
| 10-565993-023 | Amphenol Corporation | CONNECTOR |
| 8 | ||
| 459930-1-ZZ | TE Connectivity | DEUTSCH CONNECTOR 459930-1-ZZ |
| 5 | ||
| M85049/93-06 | Glenair Inc | COMPOSITE - COMPONENT PARTS |
| 3 | ||
| 20002993-00 | TE Connectivity | SENSOR (TE REF 20002993-00) |
| 1 | ||
| 14993001 | Hartmann Electronic | AERO RELAY/CONTACTOR 14993001 |
| 1 | ||
![]() PUI | CMSH9930Q8-HF | 112,000 | ||||
![]() Richardson RFPD | 2099-30F | Spectrum Control | Medium Power Fixed Attenuator 18GHz 30dB 2-Pin RoHS : Compliant | 0 | ||
| 02560993-000 | TE Connectivity | General Purpose DC LVDT RoHS : Compliant |
| 0 | ||
| R599309000 | Radiall | SqF. Min R574 57 SP3-6p RoHS : Not Compliant | 0 | |||
| RPC1199-30 | Astrodyne TDI Power Supplies & EMI Filters | Single Stage, GND Choke Power Line Filters RoHS : Compliant | 0 | |||
| 9930-0881-6224 | Winchester Interconnect | SMA JACK, THREAD-IN WITH METAL BOSS RoHS : Not Compliant | 0 | |||
| 85099303 | HUBER+SUHNER | 6530.41.0002 | 0 | |||
| B39941B9930P810 | RF360 Holdings Singapore Pte Ltd | CSSP3 GT RoHS : Compliant |
| 0 | ||
| R599308000 | Radiall | SqF. Min R573 57 SP3-6p RoHS : Not Compliant |
| 0 | ||
| 2099-30M | Spectrum Control | Medium Power Fixed Attenuator 18GHz 30dB 2-Pin RoHS : Compliant | 0 | |||
| ATS-EXL99-300-R0 | Advanced Thermal Solutions Inc | Heat Sinks Extrusion Profile, AL6063 RoHS : Compliant |
| 0 | ||
| LFSPXO019930 | IQD Frequency Products | Oscillator XO 25MHz ±50ppm 50pF HCMOS/TTL 55% 5V 4 RoHS : Compliant |
| 0 | ||
| R929993006 | Radiall | MISC CONNECTOR | 0 | |||
| R929993000 | Radiall | BANANA / 2MM SERIE FEMALE 20-WAY 6MM SOLDER POT BL RoHS : Not Compliant |
| 0 | ||
| R929993003 | Radiall | Banana/2mm Female 20-Way 6mm Solder Pot Black RoHS : Not Compliant |
| 0 | ||
![]() Chip 1 Exchange | CMSH9930Q8-HF | Comchip Technology Corporation Ltd | INSTOCK RoHS : Compliant | 112,000 | ||
| 46993-0211 | Molex | INSTOCK RoHS : Compliant | 87,518 | |||
| 929930-1 | TE Connectivity | INSTOCK RoHS : Compliant | 50,927 | |||
| 09-93-0500 | Molex | INSTOCK RoHS : Compliant | 33,836 | |||
| 46993-0810 | Molex | INSTOCK RoHS : Compliant | 31,751 | |||
| 46993-0610 | Molex | INSTOCK RoHS : Compliant | 30,245 | |||
| 46993-0820 | Molex | INSTOCK | 15,522 | |||
| 34993-0001 | Molex | INSTOCK | 8,346 | |||
| 73099-3004 | Molex | INSTOCK RoHS : Compliant | 4,161 | |||
| S739-93-001-30-070000 | Mill-Max Mfg Corp | INSTOCK RoHS : Not Compliant | 4,000 | |||
| NX5032GA-EXS00A-CG00099-30MHZ | INSTOCK | 3,976 | ||||
| C91993-000 | TE Connectivity | INSTOCK | 2,600 | |||
| RJMG2010S9930NR | Amphenol Corporation | INSTOCK RoHS : Compliant | 1,952 | |||
| 0009930600 | INSTOCK | 500 | ||||
| 199308 | INSTOCK | 37 | ||||
![]() Avnet Abacus | 469930411 | Molex | (Alt: 469930411) RoHS : Compliant | 200,501 | ||
| 469930210 | Molex | (Alt: 469930210) RoHS : Compliant | 60,000 | |||
| 469930211 | Molex | (Alt: 469930211) RoHS : Compliant | 54,000 | |||
| 469930410 | Molex | (Alt: 469930410) RoHS : Compliant | 16,000 | |||
| 469930411 | Molex | (Alt: 469930411) RoHS : Compliant | 11,000 | |||
| 9930300 | Molex | (Alt: 9930300) RoHS : Compliant | 2,500 | |||
| 9930900 | Molex | (Alt: 9930900) RoHS : Compliant | 0 | |||
| 6489930-7 | TE Connectivity | (Alt: 6489930-7) RoHS : Compliant | 0 | |||
| 469930410 | Molex | (Alt: 469930410) RoHS : Compliant | 0 | |||
| 469930250 | Molex | (Alt: 469930250) RoHS : Compliant | 0 | |||
| 9-6609930-5 | TE Connectivity | (Alt: 9-6609930-5) RoHS : Compliant | 0 | |||
| 5-6609930-9 | TE Connectivity | (Alt: 5-6609930-9) RoHS : Compliant | 0 | |||
| 192993-0011 | ITT Interconnect Solutions | Conn TNM Circular PIN 4 POS Crimp ST Cable Mount 4 Terminal 1 Port (Alt: 192993-0011) RoHS : Compliant | 0 | |||
| 3-6609930-8 | TE Connectivity | AMP366099308 (Alt: 3-6609930-8) RoHS : Compliant | 0 | |||
| 192993-0022 | ITT Interconnect Solutions | (Alt: 192993-0022) RoHS : Compliant | 0 | |||
![]() Avnet Asia | ASP-223993-01 | Samtec Inc | (Alt: ASP-223993-01) RoHS : Compliant | 0 | ||
| SCY99303BMX330TCG | onsemi | (Alt: SCY99303BMX330TCG) RoHS : Compliant | 0 | |||
| 0469930411 | Molex | Connector Housing, Plug, 4 Contacts, 2 Rows, 4.2 mm, 46993 Series, Nylon, Mini-Fit Jr., Black (Alt: 0469930411) RoHS : Compliant | 0 | |||
| 0469930610 | Molex | (Alt: 0469930610) RoHS : Compliant | 0 | |||
| 10169930-101LF | Amphenol Corporation | CONN PRESSFIT EXAMAX2 MALE BLACK 6X NV E (Alt: 10169930-101LF) RoHS : Compliant | 0 | |||
| 0348993080 | Molex | Connector Housing, Plug, 3 Contacts, 1 Row, 4 mm, 34899 Series, Nylon, SPS, MXP120, Black, Sealed (Alt: 0348993080) RoHS : Compliant | 0 | |||
| 0469930210 | Molex | Connector Housing, Plug, 2 Contacts, 2 Rows, 4.2 mm, 46993 Series, Nylon, Mini-Fit Jr., Black (Alt: 0469930210) RoHS : Compliant | 0 | |||
| 0469930211 | Molex | Connector Housing, Plug, 2 Contacts, 2 Rows, 4.2 mm, 46993 Series, Nylon, Mini-Fit Jr., Black (Alt: 0469930211) RoHS : Compliant | 0 | |||
| 0469930410 | Molex | (Alt: 0469930410) RoHS : Compliant | 0 | |||
![]() Avnet Silica | HV9930LG-G | Microchip Technology Inc | LED DRVR 9V12V15V18V24V 8Pin SOIC N (Alt: HV9930LG-G) RoHS : Compliant | 0 | ||
![]() DB Roberts | 99301-00569 | Avdel | CONTACT WSH M6 NA ST 730601783 | 0 | ||
| A3-99-304-12 | Southco | 0 | ||||
| 29930019 | GRIPCO STANLEY | 0 | ||||
| 29930002 | GRIPCO STANLEY | 0 | ||||
| 99301-00734 | Avdel | RND INSERT M10 LF ST NXS-R350- | 0 | |||
| 1009930000VR | Essentra Components | 0 | ||||
| 99301-00716 | Avdel | PUSH ROD - STAINLESS-STEEL 290 | 0 | |||
| R4-99-308-30 | Southco | R4-99-308-30 | 0 | |||
| A3-99-305-125-12 | Southco | A3-99-305-125-12 | 0 | |||
| 99301-00552 | Avdel | M10 STEEL CLOSED 4MM-7MM | 0 | |||
| 17W09930B | Essentra Components | FLAT WASHER, .771 ID, .993 OD, | 0 | |||
| 99301-00756 | Avdel | M6X20MM SQUARE HEAD BOLT 11546 | 0 | |||
| 99301-00724 | Avdel | RND INSERT M10 LF ST 09616N908 | 0 | |||
| A3-99-305-110-12 | Southco | A3-99-305-110-12 | 0 | |||
| 17W09930 | Essentra Components | FLAT WASHER, .771 ID, .993 OD, | 0 | |||
![]() EBV Elektronik | VLWY9930 | Vishay Intertechnologies | TELUX YELLOW 90 762MM SQUARE PACK e4 (Alt: VLWY9930) RoHS : Compliant | 1,750 | ||
| AEDR-9930E2-102 | Broadcom Limited | (Alt: AEDR-9930E2-102) RoHS : Compliant | 300 | |||
| HEDS-9930E2EVB | Broadcom Limited | AR3E2 397LPI EVAL BOARD WITH CS (Alt: HEDS-9930E2EVB) RoHS : Compliant | 42 | |||
| HEDS-9930E2PRGEVB | Broadcom Limited | Programming Kit AEDR9930E2 SPI Reflective Incremental Rotary Encoder (Alt: HEDS-9930E2PRGEVB) RoHS : Compliant | 12 | |||
| VLWR9930 | Vishay Intertechnologies | TELUX RED 90 762MM SQUARE PACK e4 (Alt: VLWR9930) RoHS : Compliant | 0 | |||
| HEDS-9930EEVB | Broadcom Limited | AEDR9930E Rotary 397LPI Eval BoardCW 256CPR to 1440CPR (Alt: HEDS-9930EEVB) RoHS : Compliant | 0 | |||
| HEDS-9930ELEVB | Broadcom Limited | AEDR9930EL Linear EVBCodestrips (Alt: HEDS-9930ELEVB) RoHS : Compliant | 0 | |||
| AEDR-9930E-102 | Broadcom Limited | Rotary Encoder Optical Incremental 397 LPI 3 V to 36 V (Alt: AEDR-9930E-102) RoHS : Compliant | 0 | |||
| AEDR-9930EL-102 | Broadcom Limited | Linear 397LPI EncoderTnR 100 pcs (Alt: AEDR-9930EL-102) RoHS : Compliant | 0 | |||
| AEDR-9930EL-100 | Broadcom Limited | LINEAR 397LPI ENCODERTNR 1000 PCS (Alt: AEDR-9930EL-100) RoHS : Compliant | 0 | |||
| AEDR-9930E2-100 | Broadcom Limited | (Alt: AEDR-9930E2-100) RoHS : Compliant | 0 | |||
| ARE1-9930-00000 | Broadcom Limited | HIGH POWER IRLED 940NM 90DEG (Alt: ARE1-9930-00000) RoHS : Compliant | 0 | |||
| HEDS-9930E2LEVB | Broadcom Limited | Evaluation Board AEDR9930E2L Incremental Linear Encoder 2 Units of Code Strip Bundling (Alt: HEDS-9930E2LEVB) RoHS : Compliant | 0 | |||
| HEDS-9930EPRGEVB | Broadcom Limited | SPI Programming Kit with Evaluation board bundling with 2 units of code wheel multiple optical radi (Alt: HEDS-9930EPRGEVB) RoHS : Compliant | 0 | |||
| AEDR-9930E2L-102 | Broadcom Limited | AR3E2L 397LPI REF ENCTR 100 PCS (Alt: AEDR-9930E2L-102) RoHS : Compliant | 0 | |||
![]() ECCO | 031-0993-002 | ITT Interconnect Solutions |
| 200 | ||
![]() Master Electronics | 2439930000 | Weidmüller Interface GmbH & Co. KG | Connector Wire to Board Male Header 4 Position 2.5mm Straight Solder Through Hole Black Box RoHS : Compliant |
| 245 | |
| 192993-0011 | ITT Interconnect Solutions | The 192993-0011 is a 4-contact pin plug connector from the Cannon Trident Neptune Metal (TNM) series designed for sealed rugged applications. RoHS : Compliant |
| 115 | ||
| 192993-0633 | ITT Interconnect Solutions | Connector Accessories Heat Shrink Adapter for TNM Circular Connectors Shell Size 14 Individual RoHS : Compliant |
| 68 | ||
| 5-6609930-9 | TE Connectivity | PE00XSSX0=C2373 RoHS : Compliant |
| 19 | ||
| FW-02-03-L-D-099-300 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 9-6609930-5 | TE Connectivity | PE000SH6B=C2409 MOQ Reduction RoHS : Compliant |
| 0 | ||
| FFSD-04-S-19.93-01 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-05-D-09.93-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 0899306 | Phoenix Contact | E PX A 75X190X56 RoHS : Compliant |
| 0 | ||
| 0899307 | Phoenix Contact | E PX A 75X190X75 RoHS : Compliant |
| 0 | ||
| 192993-0101 | ITT Interconnect Solutions | TNM6U14-0304S1L / 192993-0101 / Trident RoHS : Compliant |
| 0 | ||
| 213499-3000 | Molex | GNSS External Antenna - Magnetic Mount - 3.0m Cables with SMA Male Connector RoHS : Compliant |
| 0 | ||
| CL8993-000 | TE Connectivity | TX15AB90-2418 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 3-6609930-8 | TE Connectivity | PE00XDS3B=C2352 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 6609930-6 | TE Connectivity | PE00SSH6A=C2320 RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 09930060401 | HARTING Technology Group | Heavy Duty Power Connectors Han ORV3 Power 6+PE hood 15-17 mm OD RoHS : Compliant |
| 50 | |
| 09930007264 | HARTING Technology Group | Crimp Contact, female, angled, 50mm (1/0AWG), Contact Termination: Crimp RoHS : Compliant |
| 50 | ||
| 09930011304 | HARTING Technology Group | Heavy Duty Power Connectors Han S 120 Bulkhead Mount Housing red M18 w/ male contact busbar RoHS : Compliant |
| 50 | ||
| 09930011309 | HARTING Technology Group | Heavy Duty Power Connectors Han S 120 Bulkhead Mount Housing blue M18 w/ male contact busbar RoHS : Unknown |
| 50 | ||
| RPC1299-30 | Astrodyne TDI Power Supplies & EMI Filters | Power Line Filters FILTER, 30A DC PCB RoHS : Compliant |
| 50 | ||
| 09930010322 | HARTING Technology Group | Heavy Duty Power Connectors Han S Bulkhead Mount Housing red M20 w/ male contact M8 RoHS : Compliant |
| 50 | ||
| 09930010502 | HARTING Technology Group | Heavy Duty Power Connectors Han S Hood, angled, 1pos, red 25-50mm2, 1 item RoHS : Compliant |
| 50 | ||
| 114993070 | Seeed Development Ltd | Multiple Function Sensor Modules SenseCAP Indicator, D1L(Alpha), 4" Touch Screen, ESP32 & RP2040 Dual-MCU, Wi-Fi/BLE/LoRa |
| 50 | ||
| 09930011108 | HARTING Technology Group | Han S 120 Screw Mount Housing, blue, M18, w- male contact M6 RoHS : Compliant |
| 50 | ||
| 114993069 | Seeed Development Ltd | Multiple Function Sensor Modules SenseCAP Indicator + D1S (Alpha), 4", Touch Screen, ESP32S3 & RP2040, tVOC Sensor, CO2 Sensors, Grove TH Sensor |
| 9 | ||
| 09930010126 | HARTING Technology Group | Heavy Duty Power Connectors Han S Screw Mount Housing red M20 w/ male contact M8 w/ Tuflok protection RoHS : Compliant |
| 8 | ||
| HSM6205 993 010 | HSM | 1 ROLL STRAPPING TAPE-WG 30- 1640 |
| 5 | ||
| 09930010125 | HARTING Technology Group | Heavy Duty Power Connectors Han S Screw Mount Housing black M20 w/ male contact M8 w/ Tuflok protection RoHS : Compliant |
| 0 | ||
| 09930011105 | HARTING Technology Group | Heavy Duty Power Connectors Han S 120 Screw Mount Housing black M18 w/ male contact M6 (w/ Tuflok) RoHS : Compliant |
| 0 | ||
| 09930011125 | HARTING Technology Group | Heavy Duty Power Connectors Han S 120 Screw Mount black M18 w/ male contact M6 (w/ unlocking protection) RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C9930 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to Push-On SMB Plug Cable Using PE-SR405FLJ Coax., Radio frequency assembly MCX plug right angle to push-on SMB plug cable using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to push-on SMB plug cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a SMB cable connection on the other. Our right angle MCX to SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3C9930 can also be known as a right angle MCX male to SMB male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9930 RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle MCX plug to SMB plug cable has a maximum VSWR of 1.4:1. MCX male to SMB male cable assembly PE3C9930 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MCX cable assembly is manufactured with right angle MCX to SMB cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9930 can also be used in the other direction and will be a SMB plug to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMB cable assembly for quick shipment worldwide. Variations of MCX and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMB RF cable assembly as per your requirements. | 1,830 | ||
| PE3W09930-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-195-FR Coax., Radio frequency assembly SMA male to BNC male low loss cable 12 inch length using LMR-195-FR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male low loss cable 12 inch length using LMR-195-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3W09930-12, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W09930-12 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09930-12 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 12 inch length using LMR-195-FR coax. |
| 1,081 | ||
| PE3W09930-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to BNC Male Low Loss Cable 100 cm Length Using LMR-195-FR Coax., Radio frequency assembly SMA male to BNC male low loss cable 100 cm length using LMR-195-FR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male low loss cable 100 cm length using LMR-195-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3W09930-100CM, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W09930-100CM is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09930-100CM can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 100 cm length using LMR-195-FR coax. |
| 1,081 | ||
| PE3W09930-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-195-FR Coax., Radio frequency assembly SMA male to BNC male low loss cable 24 inch length using LMR-195-FR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male low loss cable 24 inch length using LMR-195-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3W09930-24, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W09930-24 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09930-24 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 24 inch length using LMR-195-FR coax. |
| 1,081 | ||
| PE3W09930-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMA Male to BNC Male Low Loss Cable 150 cm Length Using LMR-195-FR Coax., Radio frequency assembly SMA male to BNC male low loss cable 150 cm length using LMR-195-FR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male low loss cable 150 cm length using LMR-195-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3W09930-150CM, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W09930-150CM is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09930-150CM can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 150 cm length using LMR-195-FR coax. |
| 955 | ||
| PE3W09930-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-195-FR Coax., Radio frequency assembly SMA male to BNC male low loss cable 60 inch length using LMR-195-FR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to BNC male low loss cable 60 inch length using LMR-195-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3W09930-60, can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3W09930-60 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09930-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 60 inch length using LMR-195-FR coax. |
| 940 | ||
| PE3C9930-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Plug Right Angle to Push-On SMB Plug Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly MCX plug right angle to push-on SMB plug cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to push-on SMB plug cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a SMB cable connection on the other. Our right angle MCX to SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3C9930-24 can also be known as a right angle MCX male to SMB male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9930-24 RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle MCX plug to SMB plug cable has a maximum VSWR of 1.4:1. MCX male to SMB male cable assembly PE3C9930-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MCX cable assembly is manufactured with right angle MCX to SMB cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9930-24 can also be used in the other direction and will be a SMB plug to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMB cable assembly for quick shipment worldwide. Variations of MCX and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMB RF cable assembly as per your requirements. |
| 366 | ||
| PE3C9930-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. MCX Plug Right Angle to Push-On SMB Plug Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly MCX plug right angle to push-on SMB plug cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to push-on SMB plug cable 6 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a SMB cable connection on the other. Our right angle MCX to SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3C9930-6 can also be known as a right angle MCX male to SMB male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9930-6 RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle MCX plug to SMB plug cable has a maximum VSWR of 1.4:1. MCX male to SMB male cable assembly PE3C9930-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MCX cable assembly is manufactured with right angle MCX to SMB cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9930-6 can also be used in the other direction and will be a SMB plug to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMB cable assembly for quick shipment worldwide. Variations of MCX and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMB RF cable assembly as per your requirements. |
| 366 | ||
| PE3M0099-30 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/113-RG316-27478, RF Cable Type: M17/113-RG316, RF Cable Impedance: 50 Ohm, Length: 30 inches. MIL-DTL-17 TNC Male to TNC Male Cable 30 Inch Length Using M17/113-RG316 Coax., Radio frequency assembly MIL-DTL-17 TNC male to TNC male cable 30 inch length using M17/113-RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 TNC male to TNC male cable 30 inch length using M17/113-RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/26-0018 TNC to M39012/26-0018 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/26-0018 TNC cable connection on one end and M39012/26-0018 TNC cable connection on the other. Our M39012/26-0018 TNC to M39012/26-0018 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/26-0018 TNC to M39012/26-0018 TNC cable is a male to male coax assembly, PE3M0099-30, can also be known as a MIL-DTL-17/MIL-C-17 M39012/26-0018 TNC plug to M39012/26-0018 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/26-0018 TNC plug to M39012/26-0018 TNC plug cable assembly PE3M0099-30 is built with M17/113-RG316 which is a flexible coax type. The Pasternack flexible M39012/26-0018 TNC cable assembly is manufactured with M39012/26-0018 TNC to M39012/26-0018 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 3 GHz maximum frequency M39012/26-0018 TNC male to M39012/26-0018 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/26-0018 TNC plug to M39012/26-0018 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/26-0018 TNC to M39012/26-0018 TNC cable assembly for quick shipment worldwide. Variations of M39012/26-0018 TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 TNC male to TNC male cable 30 inch length using M17/113-RG316 coax. |
| 6 | ||
| PE9930-120-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Banana Plug Cable 120 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9930-120-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a banana connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and plug for side 2. Banana plug to banana plug cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9930-120-R Banana plug to banana plug test equipment lead using Red Wire cable has a 120 inch length. Pasternack banana to banana Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to banana connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9930-36-B | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: BK18AWGWire, RF Cable Type: Black Wire. Banana Plug to Banana Plug Cable 36 Inch Length Using Black Wire. Very low frequency equipment test lead cable assembly PE9930-36-B from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a banana connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and plug for side 2. Banana plug to banana plug cable test lead for RF is constructed with Black Wire cable and the impedance is. PE9930-36-B Banana plug to banana plug test equipment lead using Black Wire cable has a 36 inch length. Pasternack banana to banana Black Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to banana connectors and Black Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9930-6-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Banana Plug Cable 6 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9930-6-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a banana connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and plug for side 2. Banana plug to banana plug cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9930-6-R Banana plug to banana plug test equipment lead using Red Wire cable has a 6 inch length. Pasternack banana to banana Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to banana connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9930-48-B | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: BK18AWGWire, RF Cable Type: Black Wire. Banana Plug to Banana Plug Cable 48 Inch Length Using Black Wire. Very low frequency equipment test lead cable assembly PE9930-48-B from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a banana connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and plug for side 2. Banana plug to banana plug cable test lead for RF is constructed with Black Wire cable and the impedance is. PE9930-48-B Banana plug to banana plug test equipment lead using Black Wire cable has a 48 inch length. Pasternack banana to banana Black Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to banana connectors and Black Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE3FCA399-30M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to LC UPC, OM1 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Orange-30M. Pasternack’s PE3FCA399-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 12-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA399-30M fiber optic cable with a 6.2 mm cable diameter and 62 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W19930 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to Slide-On BMA Jack 2 Hole Flange Cable Using PE-SR405FL Coax. PE3W19930 is a BMA jack 2 hole flange to BMA jack 2 hole flange cable using PE-SR405FL coax. This Pasternack BMA jack 2 hole flange to BMA jack 2 hole flange cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm BMA for connector 2. Our jack BMA 2 hole flange to jack BMA 2 hole flange cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W19930 BMA jack 2 hole flange to BMA jack 2 hole flange cable assembly is constructed with PE-SR405FL coax. | 0 | |||
![]() TE Connectivity | 1-2199300-2 | TE Connectivity | 32P,DIP SKT,600 CL,OTC,PB FREE Contact Fabrication: Stamped & Formed Number of Positions: 32 Connector Profile: Standard Row-to-Row Spacing: .6 in Row-to-Row Spacing: 15.24 mm Stamped & Formed 32 Standard .6" | Dip And Holtite Socket | Part Number: 1-2199300-2 | Internal Number: 1-2199300-2 | TE Connectivity RoHS : Compliant |
| 1,582 | |
![]() Teledyne HiRel | 5962-8993001MIA | Teledyne HiRel | VOLT. REGULATOR, DUAL TRACKING RoHS : Not Compliant | 0 | ||
![]() Vyrian | 192993-0093 | ITT Interconnect Solutions | Connector Accessory, 0.334in Min Cable Dia, 0.402in Max Cable Dia, Sealing Item, Metal RoHS : Compliant | 16,022 | ||
| RPC1299-30 | Astrodyne Tdi | Data Line Filter, 1 Function(s), 75V, 30A, 9 Pin(s) | 12,184 | |||
| 2299301 | Phoenix Contact | Cable Assembly, 16 Conductor(s), 26AWG, 60V, Flexible Cord And Fixture Wire RoHS : Compliant | 11,884 | |||
| 192993-0023 | ITT Interconnect Solutions | Circular Connector, 12 Contact(s), Zinc Alloy, Female, Crimp Terminal, Receptacle RoHS : Compliant | 10,783 | |||
| 192993-0003 | ITT Interconnect Solutions | Circular Connector, 12 Contact(s), Zinc Alloy, Male, Crimp Terminal, Plug RoHS : Compliant | 10,188 | |||
| 5962-01-299-3045 | Texas Instruments | OTP ROM, 32X8, 40ns, TTL, CDIP16 RoHS : Not Compliant | 8,679 | |||
| AEDR-9930EL-102 | Broadcom Limited | Linear Position Encoder | 8,301 | |||
| MAX9930EUA+ | Analog Devices Inc | Log Or Antilog Amplifier, 1 Func, BIPolar, PDSO8 RoHS : Compliant | 6,628 | |||
L9930PD![]() | STMicroelectronics | Full Bridge Based MOSFET Driver, 0.38A, PDSO20 RoHS : Compliant | 6,540 | |||
| JD9930BCA | National Semiconductor Corporation | 6,096 | ||||
L9930PD13TR![]() | STMicroelectronics | Full Bridge Based MOSFET Driver, 0.38A, PDSO20 RoHS : Compliant | 5,627 | |||
| APDS-9930 | Broadcom Limited | Photoelectric Sensor, 3%, Rectangular, Surface Mount RoHS : Compliant | 5,429 | |||
| AEDR-9930E-100 | Broadcom Limited | INCREMENTAL ROTARY ENCODER RoHS : Compliant | 4,738 | |||
| HEDS-9930EPRGEVB | Broadcom Limited | 3,049 | ||||
| 192993-0633 | ITT Interconnect Solutions | Connector Accessory RoHS : Compliant | 406 | |||
![]() Waytek, Inc. | 624 1599 3 01 RT | Rennsteig Tools Inc | HES 1.0 Thin Wall Crimp Die Tool Delphi 13882808 USE WITH PN 385 |
| 3 | |
![]() Win Source Electronics | TPS79930DDCR![]() | Texas Instruments | LDO Regulator Pos 3V 0.2A 5-Pin TSOT-23 T/R / IC REG LDO 3V 0.2A 5SOT RoHS : Compliant |
| 15,000 | |
TPS79930DDCRG4![]() | Texas Instruments | IC REG LDO 3V 0.2A 5SOT RoHS : Compliant |
| 14,370 | ||
TPS79930DDCT![]() | Texas Instruments | IC REG LDO 3V 0.2A 5SOT RoHS : Compliant |
| 14,260 | ||
| APDS-9930 | Broadcom Limited | Digital Proximity and Ambient Light Sensor / IC PROXIMITY SENS SGNL COND 8SMD RoHS : Compliant |
| 8,604 | ||
TPS79930DDCTG4![]() | Texas Instruments | IC REG LDO 3V 0.2A 5SOT RoHS : Compliant |
| 2,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |