| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
985L-C1-AF5-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Rochester Electronics | AD9985AKSTZ-140![]() | Analog Devices Inc | Interface Circuit, PQFP80 RoHS : Compliant |
| 56,446 | |
LP2985A-18DBVR![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 150mA SOT-23-5 T/R RoHS : Compliant |
| 925 | ||
LP2985IM5-1.8![]() | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, 0.6V Dropout, BIPolar, PDSO5 RoHS : Not Compliant |
| 20,000 | ||
LP2985IM5-3.6/NOPB![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 3.6V 150mA SOT-23-5 T/R RoHS : Compliant |
| 1,037 | ||
AM29C985JC![]() | AMD | Parallel I/O Port, 24 I/O, CMOS, PQCC68 RoHS : Not Compliant |
| 1,058 | ||
AM29C985JCTR![]() | AMD | Parallel I/O Port, 24 I/O, CMOS, PQCC68 RoHS : Not Compliant |
| 500 | ||
MAX1985ETP+![]() | Maxim Integrated Products | LED Driver, 6-Segment RoHS : Compliant |
| 5,332 | ||
| LM98510CCMT | National Semiconductor Corporation | TI-Special, Contact for details RoHS : Not Compliant |
| 372 | ||
| LP2985IBL-285 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.85V, 0.575V Dropout, BIPolar, PBGA5 RoHS : Not Compliant |
| 2,750 | ||
| LP2985IBPX-3.6 | National Semiconductor Corporation | LP2985 - Micropower 150-mA Low-Noise Ultra-Low-Dropout Regulator in a SOT-23 Package RoHS : Not Compliant | 9,000 | |||
| LP2985IM5-1.8 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 1.8V, 0.6V Dropout, BIPolar, PDSO5 RoHS : Not Compliant |
| 2,875 | ||
| LP2985IM5-12 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 12V, 0.575V Dropout, BIPolar, PDSO5 RoHS : Not Compliant |
| 8,611 | ||
| LP2985IM5-3.6/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 3.6V 150mA SOT-23-5 T/R RoHS : Compliant |
| 1,381 | ||
| LP2985ITP-2.7/NOPB | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2.7V, 0.575V Dropout, BIPolar, PBGA5 RoHS : Compliant |
| 2,250 | ||
| LP3985ITLX-3.3/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 3.3V 150mA 5-BGA T/R RoHS : Compliant |
| 9,000 | ||
![]() ComSIT USA | 60985513 | Sumitomo Wiring Systems LTD | 2 WAY HOUSING Combination Line Connector, 2 Contact(s), Male RoHS : Compliant | 54,000 | ||
| LD2985BM33R | SGS Semiconductor Ltd | Very low drop and low noise voltage regulator with inhibit function Fixed Positive LDO Regulator, 3.3V, 0.575V Dropout, BIPolar, PDSO5 RoHS : Compliant | 12,095 | |||
LD3985M30R![]() | STMicroelectronics | ULTRA LOW DROP-LOW NOISE BICMOS VOLTAGE REGULATOR Fixed Positive LDO Regulator, 3V, 0.1V Dropout, BICMOS, PDSO5 RoHS : Compliant | 9,000 | |||
| L7985TR | STMicroelectronics | 2 A STEP-DOWN SWITCHING REGULATOR Switching Regulator, Voltage-mode, 2A, 275kHz Switching Freq-Max, PDSO10 RoHS : Compliant | 5,000 | |||
| LP2985AIM5X30 | National Semiconductor Corporation | MICROPOWER 150 MILLIAMP L-NOISE L-DROPOUT RGLTR IN SOT-23 PKG DESIGNED FOR USE W/ VERY L ESR OUTPUT CAPACITOR Fixed Positive LDO Regulator, 3.2V, 0.575V Dropout, BIPolar, PDSO5 RoHS : Compliant | 3,000 | |||
| LP3985IM5X33NOPB | National Semiconductor Corporation | MICROPOWER, 150 MILLIAMP LOW-NOISE ULTRA LOW-DROPOUT CMOS VOLTAGE REGULATOR Fixed Positive LDO Regulator, 3.3V, 0.1V Dropout, CMOS, PDSO5 RoHS : Compliant | 3,000 | |||
| LD2985AM50R | SGS Semiconductor Ltd | VERY LOW DROP AND LOW NOISE VOLTAGE REGULATOR LOW ESR CAPACITOR COMPATIBLE, WITH INHIBIT FUNCTION Fixed Positive LDO Regulator, 5V, 0.575V Dropout, BIPolar, PDSO5 RoHS : Not Compliant | 2,625 | |||
| BD9851EFVE2 | ROHM Semiconductor | DUAL-OUTPUT STEP-UP, NEGATIVE, STEP-DOWN SWITCHING REGULATOR(CONTROLLER TYPE) Dual Switching Controller, Voltage-mode, 3000kHz Switching Freq-Max, PDSO20 RoHS : Compliant | 2,425 | |||
MAX985EXK+T![]() | Maxim Integrated Products | Comparator Single R-R I/O �2.75V/5.5V 5-Pin SC-70 T/R RoHS : Compliant | 1,795 | |||
| SY89854UMGTR | Micrel Inc | PRECISION LOW POWER 1-4 LVPECL FANOUT BUFFER/TRANSLATOR WITH INTERNAL TERMINATION Low Skew Clock Driver, 89854 Series, 4 True Output(s), 0 Inverted Output(s) RoHS : Compliant | 1,000 | |||
| LP2985AIM530 | National Semiconductor Corporation | 150 MILLI AMPERE, LOW-NOISE, LOW-POWER, ULTRA LOW-DROPOUT REGULATOR IN SOT-23 PACKAGE Fixed Positive LDO Regulator, 3.3V, 0.575V Dropout, PDSO5 RoHS : Compliant | 850 | |||
| LP2985IM525NOPB | National Semiconductor Corporation | 150 MILLI AMPERE, LOW-NOISE, LOW-POWER, ULTRA LOW-DROPOUT REGULATOR IN SOT-23 PACKAGE Fixed Positive LDO Regulator, 2.5V, 0.575V Dropout, PDSO5 RoHS : Compliant | 105 | |||
AD9856AST![]() | Analog Devices Inc | CMOS 200 MHZ QUADRATURE DIGITAL UPCONVERTER Telecom Circuit, 1-Func, CMOS, PQFP48 RoHS : Not Compliant | 96 | |||
AD9851BRSZ![]() | Analog Devices Inc | CMOS 180 MHZ DDS/DAC SYNTHESIZER Analog Circuit, 1 Func, CMOS, PDSO28 RoHS : Compliant | 57 | |||
| TDA9859 | Philips Semiconductors | UNIVERSAL HI-FI AUDIO PROCESSOR FOR TV Tone Control Circuit, 2 Channel(s), PDIP32 RoHS : Not Compliant | 55 | |||
![]() PEI Genesis | K985 | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
| SCE2-B-L1K07-10APA-985 | Amphenol Limited |
| 0 | |||
| SCE2-B-L1K10-37PC-985 | Amphenol Limited |
| 0 | |||
| 10-101985-203 | Amphenol Corporation |
| 0 | |||
| 029-8514-001 | Sure Seal Connections |
| 0 | |||
| 12985313 | SOURIAU-SUNBANK |
| 0 | |||
| S985-2216-1.25-12 | SOURIAU-SUNBANK |
| 0 | |||
| SCE2-B-L1K06-07PB-985 | Amphenol Limited |
| 0 | |||
| 098530-0000 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| MKJ5C7Z19-85DB | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| M85049/85-14Z02 | Amphenol PCD |
| 0 | |||
| M85049/85-16N02 | SOURIAU-SUNBANK |
| 0 | |||
| 12985315 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/85-08W02 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/85-08W02 | Amphenol PCD |
| 0 | |||
![]() Powell Electronics | 3-173985-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 12,489 | |
| 10137985-3131169LF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 2,313 | ||
| 1934985-1 | TE Connectivity | Electronic Component RoHS : Compliant |
| 1,568 | ||
| 174985-7 | TE Connectivity | Connectors RoHS : Compliant |
| 783 | ||
| FJH-50-R-09.85-4 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 323 | ||
| 3-2176398-5 | TE Connectivity | Resistors RoHS : Compliant |
| 106 | ||
| M85049/85-16N02 | SPI Connects | Backshell, Strt RFI/EMI, Shld Band or Sh |
| 90 | ||
| 1-6609985-8 | TE Connectivity | AC Power Entry Modules RoHS : Compliant |
| 79 | ||
| ACJS-MHD985 | Amphenol Corporation | Connector RoHS : Compliant |
| 66 | ||
| M85049/85N14W02 | Glenair Inc | ACCESSORIES - BANDING/CRIMP ADAPTER |
| 20 | ||
| M85049/85N12Z01 | Glenair Inc | ACCESSORIES - BANDING/CRIMP ADAPTER |
| 13 | ||
| M85049/85N14N01 | Glenair Inc | ACCESSORIES - BANDING/CRIMP ADAPTER |
| 13 | ||
| R85049/85-16W02 | TE Connectivity | Connectors RoHS : Not Compliant |
| 13 | ||
| C2F198523BK1 | Hammond Manufacturing | FRAME CONT II 19X85X23 RoHS : Compliant |
| 5 | ||
| 2-1999856-1 | TE Connectivity | WIRE CRIMPER,1.4 (.055) F |
| 1 | ||
![]() PUI | 12.87985 | 40,044 | ||||
| M85049/8-56W | Amphenol Corporation | RoHS : Not Compliant | 25 | |||
![]() Avnet Asia | B39851B8030P810 | Qualcomm RFFE Filter Products | BAND 20 FILTER FOR FEMTOCELL (Alt: B39851B8030P810) RoHS : Compliant | 0 | ||
| B39851B8622P810 | Qualcomm RFFE Filter Products | (Alt: B39851B8622P810) RoHS : Compliant | 0 | |||
| B39851M5308D310 | Qualcomm RFFE Filter Products | SAW DUPLEXER BAND 71 (Alt: B39851M5308D310) RoHS : Compliant | 0 | |||
| B39851B4428P810 | Qualcomm RFFE Filter Products | CSSP3 DPLX CU (Alt: B39851B4428P810) RoHS : Compliant | 0 | |||
| 498-5010-062 | Amphenol Corporation | (Alt: 498-5010-062) RoHS : Compliant | 0 | |||
| B39242B8985L210 | Qualcomm RFFE Filter Products | (Alt: B39242B8985L210) RoHS : Compliant | 0 | |||
| B39851B8621P810 | Qualcomm RFFE Filter Products | (Alt: B39851B8621P810) RoHS : Compliant | 0 | |||
| ASP-229854-01 | Samtec Inc | FLEXIBLE SURFACE MOUNT BOARD STACKING HE (Alt: ASP-229854-01) RoHS : Compliant | 0 | |||
| 1-5177985-7 | TE Connectivity | CONN SMD HOUSING 80P 2R FS(P0.8,H3.75) (Alt: 1-5177985-7) RoHS : Compliant | 0 | |||
| 1-480698-5 | TE Connectivity | Conn Housing PL 2 POS 6.35mm Crimp ST Cable Mount Individual (Alt: 1-480698-5) RoHS : Compliant | 0 | |||
| B39851M5006D310 | Qualcomm RFFE Filter Products | MULTIPLER 20+28A,2520 SIZE (Alt: B39851M5006D310) RoHS : Compliant | 0 | |||
| B39851B1256L210 | Qualcomm RFFE Filter Products | B39851B1256L210 (Alt: B39851B1256L210) RoHS : Compliant | 0 | |||
| B39851B1256L210W05 | Qualcomm RFFE Filter Products | (Alt: B39851B1256L210W05) RoHS : Compliant | 0 | |||
| 10168985-001LF | Amphenol Corporation | 54V INTERCONNECT CABLE (Alt: 10168985-001LF) RoHS : Compliant | 0 | |||
| B59850C0120A070 | TDK Corporation | (Alt: B59850C0120A070) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LD2985BM30R![]() | STMicroelectronics | LDO Regulator Pos 3V 015A 5Pin SOT23 TR (Alt: LD2985BM30R) RoHS : Compliant | 165,000 | ||
LD2985BM33R![]() | STMicroelectronics | LDO Regulator Pos 33V 015A 5Pin SOT23 TR (Alt: LD2985BM33R) RoHS : Compliant | 144,000 | |||
LD3985M30R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 25V to 6V 60mV drop 3V150mA out SOT235 (Alt: LD3985M30R) RoHS : Compliant | 51,000 | |||
LDS3985M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 25V to 6V 150 mV drop 33V300mA out SOT235 (Alt: LDS3985M33R) RoHS : Compliant | 42,000 | |||
| L7985ATR | STMicroelectronics | DCDC Switching Regulator Adjustable Buck BuckBoost Single Output 600 mV to 38 V 2 A (Alt: L7985ATR) RoHS : Compliant | 15,000 | |||
LD3985M18R![]() | STMicroelectronics | LDO Regulator Pos 18V 055A 5Pin SOT23 TR (Alt: LD3985M18R) RoHS : Compliant | 12,000 | |||
LD3985M25R![]() | STMicroelectronics | LDO Regulator Pos 25V 055A 5Pin SOT23 TR (Alt: LD3985M25R) RoHS : Compliant | 12,000 | |||
LD2985BM50R![]() | STMicroelectronics | LDO Regulator Pos 5V 015A 5Pin SOT23 TR (Alt: LD2985BM50R) RoHS : Compliant | 9,000 | |||
| TS985IJT | STMicroelectronics | Operational Amplifier ICs SDnon std MPP (Alt: TS985IJT) RoHS : Compliant | 5,000 | |||
| A6985F5VTR | STMicroelectronics | (Alt: A6985F5VTR) RoHS : Compliant | 5,000 | |||
LD3985M33R![]() | STMicroelectronics | LDO Voltage Regulator Fixed 25 V to 6 V Single Output 60 mV Drop 33 V 150 mA 5 Pins SOT23 (Alt: LD3985M33R) RoHS : Compliant | 3,000 | |||
| L4985ATR | STMicroelectronics | Power Factor Correction PWM CONTRLR CCM 400uA 60kHz to 71kHz 8Pin SOIC TR (Alt: L4985ATR) RoHS : Compliant | 2,500 | |||
| L4985A | STMicroelectronics | Power Factor Correction PWM Controller 71kHz 8Pin SOIC Tube (Alt: L4985A) RoHS : Compliant | 2,000 | |||
| L7985A | STMicroelectronics | DCDC Switching Regulator Adjustable Buck BuckBoost Single Output 600 mV to 38 V 2 A (Alt: L7985A) RoHS : Compliant | 2,000 | |||
| SY89853UMG | Microchip Technology Inc | (Alt: SY89853UMG) RoHS : Compliant | 60 | |||
![]() Braemac Americas-Symmetry | GS2985-INE3 | Semtech Corporation | 3G-SDI Multi-Rate Reclocker (NRND) RoHS : Compliant |
| 0 | |
| GS2985-INTE3 | Semtech Corporation | 3G-SDI Multi-Rate Reclocker (NRND) RoHS : Compliant |
| 0 | ||
| 410331B1985P3161 | Septentrio NV | mosaic FULL DevKit |
| 0 | ||
![]() DB Roberts | DIN985-M6-STL-ZI | DIN HARDWARE | NYLON INSERT LOCK NUT |
| 2,812 | |
| DIN7985-M3X6-STL-ZY | DIN HARDWARE | PAN PHIL MACHINE SCREW |
| 1,500 | ||
| M0985-C-5.1-B-16 | RAF Electronic Hardware | 0 | ||||
| 498556 | Essentra Components | 12 X 14 O-RING THREADED PLUGHD | 0 | |||
| 498557 | Essentra Components | 0 | ||||
| 17W09853B | Essentra Components | FLAT WASHER, .781 ID, 1.000 OD | 0 | |||
| 20569853 | Essentra Components | 6MM HOLE STRAIGHT WALL PULL P | 0 | |||
| 498511 | Essentra Components | 0 | ||||
| 498548 | Essentra Components | M30 X 2.0 O-RING THREADED PLUG | 0 | |||
| 498593 | Essentra Components | 40X40MM SQUARE GLIDE W10 THREA | 0 | |||
| 498559 | Essentra Components | 78 X 14 O-RING THREADED PLUGHD | 0 | |||
| CN-69-8-5 | Southco | These robust modules satisfy requirements of the AdvancedTCA� Base Specification for telecom applications including the drop test without additional support components. And multiple keying configurations provide any plug-in circuit board application wit | 0 | |||
| 498549 | Essentra Components | M33 X 2.0 O-RING THREADED PLUG | 0 | |||
| 498594 | Essentra Components | 40X40MM SQUARE GLIDE W12 THREA | 0 | |||
| DM0985-1A | Essentra Components | ROUND DIP MOLDED END-CAPPVC DI | 0 | |||
![]() EBV Elektronik | LD2985BM33R![]() | STMicroelectronics | LDO Regulator Pos 33V 015A 5Pin SOT23 TR (Alt: LD2985BM33R) RoHS : Compliant | 51,000 | ||
| RN4985,LFCT | Toshiba America Electronic Components | (Alt: RN4985,LF(CT) RoHS : Compliant | 24,000 | |||
LD3985M30R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 25V to 6V 60mV drop 3V150mA out SOT235 (Alt: LD3985M30R) RoHS : Compliant | 6,000 | |||
| SQ3985EV-T1_GE3 | Vishay Intertechnologies | (Alt: SQ3985EV-T1_GE3) RoHS : Compliant | 6,000 | |||
| BYV98-50-TR | Vishay Intertechnologies | Diode Switching 50V 4A 2Pin SOD64 TR (Alt: BYV98-50-TR) RoHS : Compliant | 5,000 | |||
LDS3985M33R![]() | STMicroelectronics | Fixed LDO Voltage Regulator 25V to 6V 150 mV drop 33V300mA out SOT235 (Alt: LDS3985M33R) RoHS : Compliant | 3,000 | |||
| L7985A | STMicroelectronics | DCDC Switching Regulator Adjustable Buck BuckBoost Single Output 600 mV to 38 V 2 A (Alt: L7985A) RoHS : Compliant | 300 | |||
| L4985A | STMicroelectronics | Power Factor Correction PWM Controller 71kHz 8Pin SOIC Tube (Alt: L4985A) RoHS : Compliant | 0 | |||
| L7985TR | STMicroelectronics | Conv DCDC Single Step Down 45V to 38V 10Pin VFQFPN EP TR (Alt: L7985TR) RoHS : Compliant | 0 | |||
| QDSP-4985 | Broadcom Limited | Displays (Alt: QDSP-4985) RoHS : Compliant | 0 | |||
LD3985M18R![]() | STMicroelectronics | LDO Regulator Pos 18V 055A 5Pin SOT23 TR (Alt: LD3985M18R) RoHS : Compliant | 0 | |||
| A6985F3V3TR | STMicroelectronics | (Alt: A6985F3V3TR) RoHS : Compliant | 0 | |||
| VSMY98525DS | Vishay Intertechnologies | IR surface emitter high pow DS 850NMe3 (Alt: VSMY98525DS) RoHS : Compliant | 0 | |||
| TLE9851QXWXUMA1 | Infineon Technologies AG | HBridge Driver IC with Integrated Arm CortexM0 Microcontroller 55V to 28V 48Pin VQFN TR (Alt: SP001724006) RoHS : Compliant | 0 | |||
| C15985_STRADELLA-8-HV-HB-W | LEDIL | Stradella Series 3x3 Lens Array for WideArea Lighting Square PMMA 495x495x712mm Clear Tray (Alt: C15985_STRADELLA-8-HV-HB-W) RoHS : Compliant | 0 | |||
![]() ECCO | M85049/8-54W | Amphenol PCD |
| 5 | ||
| A85049854W | Amphenol PCD |
| 5 | |||
![]() Flip Electronics | C8051F985-C-GMR | Silicon Laboratories Inc | Stock, Ship Today | 12,474 | ||
NTMFS4985NFT3G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 10,000 | |||
NTTFS4985NFTWG![]() | onsemi | Stock, Ship Today RoHS : Compliant | 5,000 | |||
A4985SESTR-T![]() | Allegro MicroSystems LLC | Stock, Ship Today RoHS : Compliant | 3,000 | |||
| LC98500BQ-09W-E | onsemi | Stock, Ship Today | 1,200 | |||
![]() Maritex | SP-M2.5X3-DIN7985-A2-TX | NiViss | Screw M2.5x3; pan head; DIN7985; stainless steel A2; torx TX8. |
| 4,122 | |
LP2985A-33DBVR![]() | Texas Instruments | Voltage Regulator; linear, LDO; fixed; Vout: 3.3V; Vin: 2.2-16V; Vd: 0.28V; 150mA; -40+125 deg.C; SMD; SOT23-5 RoHS : Compliant |
| 2,196 | ||
| L4985ATR | STMicroelectronics | Specialty Regulators; L4985ATR; STMICROELECTRONICS RoHS : Compliant |
| 1,818 | ||
LD3985M33R![]() | STMicroelectronics | LDO Regulators; LD3985M33R; STMICROELECTRONICS; 5; 1; 150 mA; 3.3 V RoHS : Compliant |
| 1,030 | ||
| 5177985-6 | TE Connectivity | Rectangular Connector Housings; 5177985-6; TE CONNECTIVITY; 2; 140; 140 RoHS : Compliant |
| 648 | ||
AD9852ASVZ![]() | Analog Devices Inc | Other Interface ICs; AD9852ASVZ; ANALOG DEVICES; 80; 3.465 V; 3.135 V; TQFP RoHS : Compliant |
| 450 | ||
A4985SLPTR-T![]() | Allegro MicroSystems LLC | Motor Drivers; A4985SLPTR-T; ALLEGRO MICROSYSTEMS; 35 V; 1 A; 8 V RoHS : Compliant |
| 211 | ||
| 174985-7 | TE Connectivity | Connectors Accessories; 174985-7; TE CONNECTIVITY; 8; Yellow; 8 RoHS : Compliant |
| 153 | ||
| 1456985-1 | TE Connectivity | Automotive Connectors; 1456985-1; TE CONNECTIVITY; Black; 6; Yes; 23.368 mm RoHS : Compliant |
| 127 | ||
LP2985-33DBVR![]() | Texas Instruments | Voltage Regulator; linear, LDO; fixed; Vout: 3.3V; Vin: 2.2-16V; 0.15A; -40+125 deg.C; SMD; SOT23-5 RoHS : Compliant |
| 96 | ||
| 5-534998-5 | TE Connectivity | Rectangular Connector Housings; 5-534998-5; TE CONNECTIVITY; 2; 10; 10; Yes RoHS : Compliant |
| 62 | ||
| 1734098-5 | TE Connectivity | D-Sub Connectors; 1734098-5; TE CONNECTIVITY; Receptacle, Socket; 43.1 mm; Yes; Receptacle RoHS : Compliant |
| 50 | ||
| 0034.9857 | Schurter Electronic Components | SCHURTER fuse assortment; various current ratings and characteristics; service kit; kit code 0034.9857 |
| 3 | ||
LP2985-50DBVR![]() | Texas Instruments | LDO Regulators; LP2985-50DBVR; TEXAS INSTRUMENTS; 5; 1; 150 mA; 5 V RoHS : Compliant |
| 2 | ||
LDS3985M33R![]() | STMicroelectronics | LDO Regulators; LDS3985M33R; STMICROELECTRONICS; 300 mA; Fixed; 1; 3.3 V RoHS : Compliant |
| 1 | ||
![]() Pasternack Enterprises US | PE3W09855-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to N Male Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA male to N male cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable 6 inch length using PE-SR405FLJ coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W09855-6 can also be known as a SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W09855-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance. RF specs on this 11 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09855-6 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male cable 6 inch length using PE-SR405FLJ coax. |
| 114 | |
| PE9856B/NF-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-90, Gain Min: 20, Beam Width, 3dB V: 16.5, Beam Width, 3dB H: 16.1, Frequency, Min: 8.2 GHz, Frequency, Max: 12.4 GHz. WR-90 Waveguide Standard Gain Horn Antenna Operating from 8.2 GHz to 12.4 GHz with a Nominal 20 dB Gain N Female Input. The PE9856B/NF-20 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-90 input and a waveguide to coaxial transition adapter. Our WR-90 waveguide antenna features a type N female connector. This single-band directional antenna comes with a UG-135/U flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-90 standard gain horn antenna with a type N female input has a minimum frequency of 8.2 GHz and a maximum frequency of 12.4 GHz. Pasternack’s PE9856B/NF-20 waveguide horn antenna has a typical gain of 20 dB. Our waveguide antenna has a typical vertical beam width of 16.5 degrees and a horizontal beam width of 16.1 degrees at 3 dB. This WR-90 waveguide horn antenna with 20 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 32 | ||
| PE3C9858 | Pasternack Enterprises | Key Specifications. Connector 1 Series 4.3-10 Connector 1 Gender Plug Connector Angle 1 Straight Connector 1 Impedance 50 Ohm Connector 2 Series 4.3-10 Connector 2 Gender Plug Connector Angle 2 Straight Connector 2 Impedance 50 Ohm Connector 1 Body Material Brass Connector 1 Body Plating Copper-Tin-Zinc Alloy RF Cable Part Number 0.141 Formable Non-Magnetic Cable RF Cable Impedance 50 Ohm . 4.3-10 Plug to 4.3-10 Plug Non-Magnetic Cable using 0.141 Formable Coax., Pasternack's PE3C9858 4.3-10 plug to 4.3-10 plug cable using PE-141FL-NM is part of our full line of RF components available for same-day shipping. This Pasternack 4.3-10 to 4.3-10 cable assembly has a plug to plug gender configuration with 50 ohm. The PE3C9858 4.3-10 plug to 4.3-10 plug cable assembly operates to 6 GHz. Pasternack’s Non Magnetic connectors are manufactured with materials that are especially adapted to non magnetism. Our non-magnetic connectors have a higher magnetic susceptibility than existing standard connectors made of brass/nickel materials. As a result, our non-magnetic connectors are transparent to the magnetic field, which means no field distortion and a higher Signal-to-Noise Ratio (SNR). Custom versions of most RF cable assemblies can be built and shipped same day. Custom cable assembly lengths can be obtained by specifying the desired length on the web site at time of order or by contacting a sales representative. Other available RF cable assembly value added services include connector orientation or clocking, heat shrink booting and custom labeling. RF testing can also be performed to document the electrical performance of your cable assembly. | 7 | |||
| PE9851B-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-34, Frequency, Min: 22 GHz, Frequency, Max: 33 GHz. WR-34 Waveguide Standard Gain Horn Antenna Operating From 22 GHz to 33 GHz With a Nominal 20 dBi Gain With UG-1530/U Square Cover Flange. Pasternack’s PE9851B-20 WR-34 waveguide horn is also known as a waveguide horn antenna. This WR-34 standard gain horn waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 22 to 33 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 3.34 inches, a width of 1.97 inches, and a weight of 0.5 lbs. Our antenna comes with a UG-1530/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-34 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-34 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 6 | ||
| PE9856B-20-CPRG | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-90, Frequency, Min: 8.2 GHz, Frequency, Max: 12.4 GHz. WR-90 Waveguide Standard Gain Horn Antenna Operating From 8.2 GHz to 12.4 GHz With a Nominal 20 dBi Gain With CPRG Flange. Pasternack’s PE9856B-20-CPRG WR-90 waveguide horn is also known as a waveguide horn antenna. This WR-90 standard gain horn waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 8.2 to 12.4 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 4.94 inches, a width of 3.74 inches, and a weight of 0.76 lbs. Our antenna comes with a cprg flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-90 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-90 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 3 | ||
| PE9854B-SF-30 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 30, Beam Width, 3dB V: 5, Beam Width, 3dB H: 5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Waveguide Standard Gain Horn Antenna Operating from 12.4 GHz to 18 GHz with a Nominal 30 dB Gain SMA Female Input. The PE9854B-SF-30 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a UG-1665/U square cover flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854B-SF-30 waveguide horn antenna has a typical gain of 30 dB. Our waveguide antenna has a typical vertical and horizontal beam width of 5 degrees at 3 dB. This antenna has a length of 25.21 inches, a width of 9.57 inches, and a weight of 0.52 lbs. This WR-62 waveguide horn antenna with 30 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 2 | ||
| PE39855 | Pasternack Enterprises | 0 | ||||
| PE3W00985/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Female Bulkhead Cable 36 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly SMA male to SMA female bulkhead cable 36 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead cable 36 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our a SMA to a SMA cable assembly has male gender on end 1 and female on end 2. PE3W00985/HS-36 can also be known as a SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W00985/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. SMA plug to SMA jack cable assembly PE3W00985/HS-36 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00985/HS-36 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W00985LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using RG174 Coax, RoHS. PE3W00985LF is a SMA male to SMA female bulkhead cable using RG174 coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00985LF SMA male to SMA female bulkhead cable assembly is constructed with RG174 coax. | 0 | |||
| PE9850/2F-15 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-28, Gain Min: 15, Beam Width, 3dB V: 32.1, Beam Width, 3dB H: 31.3, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz. WR-28 Waveguide Standard Gain Horn Antenna Operating From 26.5 GHz to 40 GHz With a Nominal 15 dB Gain 2.92mm Female Input. The PE9850/2F-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-28 input and a waveguide to coaxial transition adapter. Our WR-28 waveguide antenna features a 2.92mm female connector. This single-band directional antenna comes with a flange. Our WR-28 standard gain horn antenna with a 2.92mm female input has a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. Pasternack’s PE9850/2F-15 waveguide horn antenna has a typical gain of 15 dB. Our waveguide antenna has a typical vertical beam width of 32.1 degrees and a horizontal beam width of 31.3 degrees at 3 dB. This WR-28 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE9850B-30 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-28, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz, Beam Width V: 5, Beam Width H: 5. WR-28 Waveguide Standard Gain Horn Antenna Operating From 26.5 GHz to 40 GHz With a Nominal 30 dBi Gain With UG-599/U Square Cover Flange. Pasternack’s PE9850B-30 WR-28 waveguide horn is also known as a waveguide horn antenna. This WR-28 standard gain horn waveguide antenna has a nominal gain of 30 dBi. Our waveguide horn can operate at frequencies ranging from 26.5 to 40 GHz. The standard gain horn antenna has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 30 dBi waveguide horn from Pasternack has an overall length of 11.61 inches, a width of 5.09 inches, and a weight of 0.35 lbs. Our WR-28 waveguide horn antenna has a typical vertical beam width of 5 degrees and a horizontal beam width of 5 degrees at 3 dB. Our antenna comes with a UG-599/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-28 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-28 waveguide horn antenna with 30 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE9856B-25 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-90, Frequency, Min: 8.2 GHz, Frequency, Max: 12.4 GHz, Beam Width V: 8, Beam Width H: 8. WR-90 Waveguide Standard Gain Horn Antenna Operating from 8.2 GHz to 12.4 GHz with a Nominal 25 dBi Gain with UG-135/U Square Cover Flange. Pasternack’s PE9856B-25 WR-90 waveguide horn is also known as a waveguide horn antenna. This WR-90 standard gain horn waveguide antenna has a nominal gain of 25 dBi. Our waveguide horn can operate at frequencies ranging from 8.2 to 12.4 GHz. The standard gain horn antenna has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 25 dBi waveguide horn from Pasternack has an overall length of 22.5 inches, a width of 9.83 inches, and a weight of 0.35 lbs. Our WR-90 waveguide horn antenna has a typical vertical beam width of 8 degrees and a horizontal beam width of 8 degrees at 3 dB. Our antenna comes with a UG-135/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-90 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-90 waveguide horn antenna with 25 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE3W11985 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. N Male Right Angle to 3.5mm Male Cable Using PE-SR405FLJ Coax. PE3W11985 is a N male right angle to 3.5mm male cable using PE-SR405FLJ coax. This Pasternack N male right angle to 3.5mm male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 3.5mm for connector 2. N right angle to 3.5mm coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male 3.5mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W11985 N male right angle to 3.5mm male cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE9854B/NF-15 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 15, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Waveguide Standard Gain Horn Antenna Operating from 12.4 GHz to 18 GHz with a Nominal 15 dB Gain N Female Input. The PE9854B/NF-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-62 standard gain horn antenna with a type N female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854B/NF-15 waveguide horn antenna has a typical gain of 15 dB. This WR-62 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE9854B/SF-10 | Pasternack Enterprises | Key Specifications, Gain Min: 10, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn Antenna Operating From 12.4 GHz to 18 GHz, 10 dBi Nominal Gain, SMA Female Input Connector, ProLine. The PE9854B/SF-10 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Our waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854B/SF-10 waveguide horn antenna has a typical gain of 10 dB. This antenna has a length of 2.61 inches, a width of 0.93 inches, and a weight of 0.5 lbs. This waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
![]() Teledyne HiRel | 5962-9098501BRA![]() | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | ||
| 5962-9098501MRA | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | |||
| 5962-9098501M2A | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | |||
| 5962-9098501MSA | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | |||
| 5962-9098501B2A | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | |||
| 5962-9098501BSA | Teledyne HiRel | MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE RoHS : Not Compliant | 0 | |||
![]() Vyrian | LP2985-26DBVT![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.6V, 0.575V Dropout, BIPolar, PDSO5 | 9,695 | ||
LP2985-30DBVTG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 3V, 0.575V Dropout, PDSO5 RoHS : Compliant | 9,305 | |||
| LP2985AIM5-3-6 | Texas Instruments | 8,648 | ||||
LP2985-29DBVTG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.9V, 0.575V Dropout, BIPolar, PDSO5 RoHS : Compliant | 8,620 | |||
| LP2985AIBP-3-0 | Texas Instruments | 7,969 | ||||
| LP2985AIM5X-5.7/NOPB | Texas Instruments | Fixed Positive LDO Regulator, 5.7V, 0.575V Dropout, BIPolar, PDSO5 RoHS : Compliant | 7,324 | |||
| LP2985AIM5-5.3 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 5.3V, 0.575V Dropout, PDSO5 RoHS : Not Compliant | 7,278 | |||
| LP2985A-27YZQR | Texas Instruments | Fixed Positive LDO Regulator, 2.7V, 0.575V Dropout, BIPolar, PBGA5 | 7,242 | |||
| LP2985IBPX-2-8 | Texas Instruments | 6,319 | ||||
LP2985A-28DBVTE4![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.8V, 0.575V Dropout, BIPolar, PDSO5 RoHS : Compliant | 6,235 | |||
| LP2985A-15YEUR | Texas Instruments | Fixed Positive LDO Regulator, 1.5V, 0.6V Dropout, PBGA5 | 5,880 | |||
LP3985IM5-2.8![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.8V, 0.1V Dropout, CMOS, PDSO5 RoHS : Not Compliant | 5,295 | |||
| LP2985AIM5X-5-0 | Texas Instruments | 4,764 | ||||
| BCM985650TIQRIQ | Broadcom Limited | 3,955 | ||||
LP2985-25DBVRG4![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.5V, 0.575V Dropout, BIPolar, PDSO5 RoHS : Compliant | 3,342 | |||
![]() Waytek, Inc. | 15324985 | Aptiv PLC | Purple Cable Seal Metri-Pack Delphi 15324985 Cable OD 2.15mm - 1.6mm 39000 |
| 663,336 | |
| 3298500.ZXM10 | Littelfuse Inc | ZCASE MEGA Fuse 32V M10 500A RoHS : Compliant |
| 504 | ||
| 07985003ZXS | Littelfuse Inc | MDM5 Sealed Power Distribution Module, 5 Pole, MIDI/AMI Fuse 32V |
| 22 | ||
![]() Win Source Electronics | LD2985BM33R![]() | STMicroelectronics | IC REG LDO 3.3V 0.15A SOT23-5 RoHS : Compliant |
| 153,000 | |
LP2985-18DBVRE4![]() | Texas Instruments | IC REG LINEAR 1.8V 150MA SOT23-5 RoHS : Compliant |
| 39,830 | ||
LP2985IM5X-2.5![]() | Texas Instruments | Micropower 150 mA Low-Noise Ultra Low-Dropout Regulator in SOT-23 and micro SMD Packages Designed for Use with Very Low ESR Output Capacitors | IC REG LINEAR 2.5V 150MA SOT23-5 RoHS : Not Compliant |
| 30,294 | ||
LP2985A-25DBVT![]() | Texas Instruments | IC REG LDO 2.5V 0.15A SOT23-5 RoHS : Compliant |
| 30,000 | ||
MAX985EUK![]() | Maxim Integrated Products | RoHS : Not Compliant |
| 25,000 | ||
| LD3985M33R(EM) | STMicroelectronics | BICMOS VOLT REG |
| 24,560 | ||
LP2985-30DBVTG4![]() | Texas Instruments | IC REG LINEAR 3V 150MA SOT23-5 RoHS : Compliant |
| 15,110 | ||
| A5985GETTR-T | Allegro MicroSystems LLC | DMOS Microstepping Driver with Translator | IC MTR DRVR BIPOLAR 8-40V 28QFN RoHS : Compliant |
| 13,400 | ||
LP2985IM5-1.8![]() | Texas Instruments | Micropower 150 mA Low-Noise Low-Dropout Regulator in SOT-23 and micro SMD packages for Applications with Output Voltages 2.0V Designed for Use with Very Low EESR Output Capacitors | IC REG LINEAR 1.8V 150MA SOT23-5 RoHS : Not Compliant |
| 12,885 | ||
LP2985IM5-3.6/NOPB![]() | Texas Instruments | IC REG LDO 3.6V 0.15A SOT23-5 RoHS : Compliant |
| 8,650 | ||
LP2985-28DBVR![]() | Texas Instruments | IC REG LDO 2.8V 0.15A SOT23-5 RoHS : Compliant |
| 6,840 | ||
| L7985TR | STMicroelectronics | IC REG BUCK ADJ 2A 10VDFPN RoHS : Compliant |
| 5,950 | ||
| TLE9853QX | Infineon Technologies AG | ARM Cortex-M Series 40MHz 10 VQFN-48-EP(7x7) Microcontrollers RoHS RoHS : Compliant |
| 5,600 | ||
AD9851BRSZ![]() | Analog Devices Inc | IC SYNTHESIZER DDS/DAC 28-SSOP RoHS : Compliant |
| 1,259 | ||
AD9852ASVZ![]() | Analog Devices Inc | IC DDS SYNTHESIZER CMOS 80-TQFP RoHS : Compliant |
| 1,095 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |