 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
8BL-36-AB5-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 TME | IS62WV1288BLL-55HLI | Integrated Silicon Solution Inc | IC: SRAM memory; 1MbSRAM; 128kx8bit; 2.5÷3.6V; 55ns; STSOP32 RoHS : Compliant |
| 224 | |
| CA-USBM-20CU-0018-BL | Lanberg | Cable; USB 2.0; USB A plug,USB B micro plug; gold-plated; 1.8m |
| 19 | ||
| FIT2213/8 BLACK 25X4 FT | Alpha Wire | Heat shrink sleeve; 2: 1; 9.53mm; L: 1.2m; black; polyolefine |
| 12 | ||
| LUCA18BL | Schneider Electric | Control unit; 4.5÷18A; TeSys Ultra; 24VDC |
| 8 | ||
| CDS-15118B-L1003 | Same Sky | Loudspeaker; miniature; 700mW; 8Ω; 15x11x3mm; 10kHz; mylar |
| 0 | ||
IS61WV5128BLL-10TLI | Integrated Silicon Solution Inc | IC: SRAM memory; 4MbSRAM; 512kx8bit; 2.4÷3.6V; 10ns; TSOP44 II RoHS : Compliant |
| 0 | ||
| IS66WVS1M8BLL-104NLI | Integrated Silicon Solution Inc | IC: SRAM memory; 8MbSRAM; 1Mx8bit; 3V; SO8; -40÷85°C; serial RoHS : Compliant |
| 0 | ||
| SZMMBZ5228BLT1G | onsemi | Diode: Zener; 0.3W; 3.9V; SMD; SOT23; single diode; reel,tape RoHS : Compliant |
| 0 | ||
| 300SP4R8BLKM1RE | E-Switch Inc | ROCKER; SP3T; Pos: 3; (ON)-OFF-(ON); 0.02A/20VAC; 20mA/20VDC; black RoHS : Compliant |
| 0 | ||
| IS43LD16640C-18BLI | Integrated Silicon Solution Inc | IC: DRAM memory; 1GbDRAM; 8Mx16bitx8; 533MHz; 18ns; TFBGA134 RoHS : Compliant |
| 0 | ||
| IS61WV10248BLL-10TLI | Integrated Silicon Solution Inc | IC: SRAM memory; 8MbSRAM; 1Mx8bit; 2.4÷3.6V; 10ns; TSOP44 II RoHS : Compliant |
| 0 | ||
| IS62WV5128BLL-55T2LI-TR | Integrated Silicon Solution Inc | IC: SRAM memory; 4MbSRAM; 512kx8bit; 2.5÷3.6V; 55ns; TSOP32 II RoHS : Compliant |
| 0 | ||
| SCS4KV 0.8 BLACK 300 | Favier Group | Insulating tube; black; fiberglass; -60÷250°C; 800um; 4kV/mm; SCS |
| 0 | ||
| ECR-WG-PG48-BL-A | TE Connectivity | Gasket; CR caoutchouc; Thk: 1.5mm; Øint: 57.8mm; Øout: 71.8mm; PG48 |
| 0 | ||
| R13-508BL-05-BR-L-1 | SCI | Switch: push-button; Pos: 2; SPST-NO; 1.5A/250VAC; OFF-ON; red |
| 0 | ||
 Avnet Americas | MMBZ5248BLT1G | onsemi | - Tape and Reel (Alt: MMBZ5248BLT1G) RoHS : Compliant |
| 135,000 | |
| 86303638BLF | Amphenol Corporation | D Sub Backshell, UNC 4-40, DA, 180?, Nylon (Polyamide) Body - Bulk (Alt: 86303638BLF) RoHS : Compliant |
| 375 | ||
| AW24M7228BLH9S | ATP Electronics Inc | - Bulk (Alt: AW24M7228BLH9S) RoHS : Compliant | 0 | |||
| MJP4-48-BLANK | Omega Engineering | JACK PANELS WITH COLOR-CODED MINIATURE CONNECTORS - Bulk (Alt: MJP4-48-BLANK) RoHS : Not Compliant |
| 0 | ||
| PWB4X8BL | Panduit Corp | WIRE BASKET 4" H X 8" W, BLACK POWDERED - Bulk (Alt: PWB4X8BL) RoHS : Not Compliant |
| 0 | ||
| IS34ML04G088-BLI | Integrated Silicon Solution Inc | 4Gb SLC-8b ECC 3.3V X8/X16 NAND FLASH MEMORY STANDARD NAND INTERFACE - Trays (Alt: IS34ML04G088-BLI) RoHS : Not Compliant |
| 0 | ||
| IS34MW08G088-BLI-TR | Integrated Silicon Solution Inc | 8GB (X8, 8BIT ECC), 63 BALL VFBGA, 1.8V, ROHS, IT, T&R - Tape and Reel (Alt: IS34MW08G088-BLI-TR) RoHS : Not Compliant | 0 | |||
| IS35ML04G088-BLA2-TR | Integrated Silicon Solution Inc | 4GB (X8, 8BIT ECC),# TSOP-48, 3V, ROHS, - Tape and Reel (Alt: IS35ML04G088-BLA2-TR) RoHS : Not Compliant | 0 | |||
| IS61WV5128BLL-10TLI | Integrated Silicon Solution Inc | SRAM, Asynchronous SRAM, 4 Mbit, 512K x 8bit, TSOP-II, 44 Pins, 2.4 V - Bulk (Alt: IS61WV5128BLL-10TLI) RoHS : Compliant |
| 0 | ||
| IS66WVS1M8BLL-104NLI | Integrated Silicon Solution Inc | PSRAM Asynchronous 8Mbit 1M X 8 7ns 8-Pin SOIC - Trays (Alt: IS66WVS1M8BLL-104NLI) RoHS : Not Compliant |
| 0 | ||
| HLCD-20-10.38-BLS-TR-2 | Samtec Inc | - Bulk (Alt: HLCD-20-10.38-BLS-TR-2) RoHS : Compliant |
| 0 | ||
| HLCD-30-35.68-BL-TR-2 | Samtec Inc | - Bulk (Alt: HLCD-30-35.68-BL-TR-2) RoHS : Compliant |
| 0 | ||
| HLCD-40-06.88-BLS-TD-1-T | Samtec Inc | - Bulk (Alt: HLCD-40-06.88-BLS-TD-1-T) RoHS : Compliant |
| 0 | ||
| SZMMBZ5228BLT1G | onsemi | - Tape and Reel (Alt: SZMMBZ5228BLT1G) RoHS : Compliant |
| 0 | ||
| 10121505-000408BLF | Amphenol Corporation | Conn Power Card Edge 4Power/8Signal POS 2.54mm/1.27mm Press Fit ST Through Hole - Trays (Alt: 10121505-000408BLF) RoHS : Compliant |
| 0 | ||
 Newark | L-RD18BLK | nVent Hoffman | Enclosure; |Nvent Hoffman L-RD18BLK RoHS : Compliant |
| 729 | |
| C6PC28-BL-20 | Black Box Corporation | Cat6 250-Mhz 28Awg Snagless Patch Cable; |Black Box C6PC28-BL-20 RoHS : Not Compliant |
| 399 | ||
| C6APC28-BL-12 | Black Box Corporation | Cat6A 500-Mhz 28Awg Snagless Patch Cable; |Black Box C6APC28-BL-12 RoHS : Not Compliant |
| 323 | ||
| PCH01CZ8-BLK-02F | L-com Inc | Mains Power Cord, 18Awg; |L-Com PCH01CZ8-BLK-02F RoHS : Compliant |
| 240 | ||
| PCH01CZR8-BLK-02F | L-com Inc | Mains Power Cord, 18Awg; |L-Com PCH01CZR8-BLK-02F RoHS : Compliant |
| 240 | ||
| IS61WV10248BLL-10TLI | Integrated Silicon Solution Inc | Sram, 8Mbit, 10Ns, 44Tsopii; |Integrated Silicon Solution/issi IS61WV10248BLL-10TLI RoHS : Compliant |
| 164 | ||
| FP301-1/2-48-BLACK | 3M Interconnect | Heat Shr Tubing, 2:1, 0.5", 12.7Mm; |3M FP301-1/2-48-BLACK RoHS : Compliant |
| 111 | ||
| L90HB18BLK | nVent Hoffman | Encl Accessory 90° E Bend Section Black; |Nvent Hoffman L90HB18BLK RoHS : Not Compliant |
| 71 | ||
| BIM2008/18-BLK/BLK | CamdenBoss Ltd | Pcb Box Enclosure, Abs, Black; |Camdenboss BIM2008/18-BLK/BLK RoHS : Compliant |
| 65 | ||
| 18988BLACK | SPC Multicomp | Feet, Rubber, 3Mm, 11X22Mm, Instrument; |Multicomp Pro 18988BLACK RoHS : Compliant |
| 58 | ||
| TRD695RA8BL-7 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695RA8BL-7 RoHS : Compliant |
| 48 | ||
| TRD815RA8BL-1 | L-com Inc | Enet Cord, Cat5E, R/A Rj45 Plug-Plug, 1'; |L-Com TRD815RA8BL-1 RoHS : Compliant |
| 42 | ||
| TRD695RA8BLK-2 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695RA8BLK-2 RoHS : Compliant |
| 20 | ||
| TRD695SRA8BL-1 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695SRA8BL-1 RoHS : Compliant |
| 9 | ||
| TRD815RA8BLK-7 | L-com Inc | Ethernet Cbl, Cat5E; |L-Com TRD815RA8BLK-7 RoHS : Compliant |
| 7 | ||
 RS | EPS300-3/8-48"-BLACK (7000133615) | 3M | TUBING, HEAT SHRINK, ADHESIVE LINED, FLAME RETARDANT, BLK & CLEAR POLYOLEFIN |
| 473 | |
| W3B2S 3/8 BLACK SPL (115-11003) | SUMITOMO ELECTRIC Interconnect Products | HEAT SHRINK TUBING, ADHESIVE LINED, 3/8, 3:1, +110C, BLK, 100FT SPL |
| 100 | ||
| EPS300-1-48"-BLACK (7000133618) | 3M | TUBING, HEAT SHRINK, ADHESIVE LINED, FLAME RETARDANT, BLACK POLYOLEFIN, 48" L |
| 83 | ||
| FP301-1/4-48"-BLACK (7000133603) | 3M | TUBING, HEAT SHRINK, FLAME RETARDANT, WHT POLYOLEFIN, 6" L, 2:1 SHRINK RATIO |
| 81 | ||
| 20228BLU | Akro-Mils | DRAWER, 19-SERIES DRAWER FOR CABINET 19228, BLUE |
| 39 | ||
| LUCA18BL | Schneider Electric | MODULE, MOTOR STARTER, 4.5-18 A, SUPPLY 24 VDC, STANDARD, COMBINATION, TESYS |
| 24 | ||
| MDT-1500-48"-BLACK (00054007406761) | 3M | HEAT SHRINK TUBING, 1.5, 3:1 MEDIUM WALL, 48" BLACK, MIL-SPEC, MDT SERIES |
| 20 | ||
| EPS300-1/8-48"-BLACK-HDR (7010297797) | 3M | TUBING, 1/8, 3:1 THIN WALL+ADHESIVE, 48" BLACK, HDR LABEL |
| 20 | ||
| 54168 (KEL-U 16/8 BLACK) | icotek Corporation | SPLIT MULTI CABLE TRANSIT FRAMES, KEL-U 16/8 BLACK |
| 17 | ||
| FP301-3/8-48"-BLACK (7100007365) | 3M | HEAT SHRINK TUBING, 3/8, 2:1 THIN WALL, 48IN BLACK, FP-301 SERIES |
| 12 | ||
| 2418-BLACK | 80/20 Inc | BLACK 10 S FLANGE MOUNT CASTER BASE PLATE |
| 10 | ||
| HDT-4500-48"-BLACK (7000132415) | 3M | CABLE SLEEVE, HEAVY WALL FLAME RETARDANT, CABLE RANGE 1000-2500 MCM, BLACK, 48 IN |
| 4 | ||
| HIX 3/8 BLACK (HIX 3/8 BLACK) | Ico-Rally | TUBING, HEAT SHRINK, ABRASION, SOLVENT RESISTANT, BLK POLYOLEFIN, 4FT. L |
| 3 | ||
| HIX 1/8 BLACK (HIX 1/8 BLACK) | Ico-Rally | TUBING, HEAT SHRINK, ABRASION, SOLVENT RESISTANT, BLK POLYOLEFIN, 4FT. L |
| 3 | ||
| ITCSN-1100-48"-BLACK (7000132380) | 3M | HEAT SHRINK TUBING, 27.9MM I.D., 3:1 SHRINK RATIO, ADHESIVE LINED, BLACK XLPO |
| 2 | ||
 Bisco Industries | CEP-08 BLACK | Caplugs | 9,302 | |||
| BP-7/8 BLACK | Caplugs | 4,004 | ||||
| FCR-18 BLACK | Caplugs | 2,003 | ||||
| CEC-18 BLACK | Caplugs | 1,869 | ||||
| VC-250-8 BLACK | Caplugs | 946 | ||||
| P-105-18 BLK | Manhattan Wire Products (MWP) | 700 | ||||
AK669/2-18-BLACK | ASSMANN WSW components GmbH | RoHS : Compliant | 600 | |||
| VC-665-8 BLACK | Caplugs | 367 | ||||
| VC-750-8 BLACK | Caplugs | 280 | ||||
| 29M30050R008BL | Micro Plastics Inc | 31 | ||||
| 47-20348-BL | Misc Wire Cable Tubing Sleeve | 20 | ||||
| DC-8 BLUE | Caplugs | 12 | ||||
| 40VI-8-B-LN-M2 | Birtcher Products | 5 | ||||
| VC-234-8 BLACK | Caplugs | 3 | ||||
| CJ588BLY | Panduit Corp | RoHS : Compliant | 1 | |||
 Rochester Electronics | PZU18BL,315 | Nexperia | Zener Diode Single 18V 250mW SOD-882 T/R RoHS : Compliant |
| 198,040 | |
| NCP4318BLCDR2G | onsemi | Power Supply Resonant Converter Controller 8-SOIC T/R RoHS : Compliant |
| 177,259 | ||
| MMBZ5228BLT1G | onsemi | Zener Diode Single 3.9V 225mW SOT-23-3 T/R RoHS : Compliant |
| 138,619 | ||
| BC848BLT3G | onsemi | Trans BJTs Single 30V 100mA SOT-23-3 T/R RoHS : Compliant |
| 1,150,325 | ||
| BC858BLT1 | onsemi | Trans BJTs Single 30V 100mA SOT-23-3 T/R RoHS : Not Compliant |
| 446,496 | ||
| BC848BLT1G | onsemi | Trans BJTs Single 30V 100mA SOT-23-3 T/R RoHS : Compliant |
| 97,108 | ||
| MMBZ5238BLT1G | onsemi | Zener Diode Single 8.7V 225mW SOT-23-3 T/R RoHS : Compliant |
| 158,210 | ||
| SZMMBZ5238BLT1G | onsemi | Zener Diode Single 8.7V 225mW SOT-23-3 T/R RoHS : Compliant |
| 32,900 | ||
AM29C828/BLA | AMD | Buffer/Line Driver Buffer, Inverting 1 Element 10 Bits 5V 24-DIP RoHS : Not Compliant |
| 1,876 | ||
| CY62128BLL-55ZRI | Cypress Semiconductor | SRAM 1Mbit 128k x 8 4.5V - 5.5V Parallel 55ns 32-SOP Tube RoHS : Not Compliant |
| 3,996 | ||
| IS61WV5128BLL-10KLI-TR | Integrated Silicon Solution Inc | IS61WV5128BLL - 4Mb,High-Speed/Low Power,Async,512K x 8,8ns/3.3v,or 10ns/2.4v-3.6v,36 Pin SOJ (400mil), RoHS : Compliant |
| 800 | ||
| MAX6478BL15BD3+ | Maxim Integrated Products | Fixed Positive LDO Regulator, 1.5V, BICMOS, PBGA6 RoHS : Compliant |
| 1,316 | ||
MAX6478BL28BD3 | Maxim Integrated Products | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, 0.21V Dropout, BICMOS, PBGA6 RoHS : Not Compliant |
| 453 | ||
| 54F648/BLA | Rochester Electronics LLC | 54F648 - Bus Transceiver/Register Inverted - Dual marked (5962-8975402LA) RoHS : Not Compliant |
| 930 | ||
| TCR3UG18B,LF(S | Toshiba America Electronic Components | TCR3UG - Low Dropout (LDO) Linear Voltage Regulator |
| 9,450 | ||
 Sager | 39-138BLK | Grayhill Inc | Pushbutton Switches RoHS : Compliant |
| 0 | |
| PWB4X8BL | Panduit Corp | Wire Ducting & Raceways Wire Basket 4 H x 8 W, Black Powdered |
| 0 | ||
| HLCD-20-10.38-BLS-TR-2 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| HLCD-30-35.68-BL-TR-2 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| HLCD-40-06.88-BLS-TD-1-T | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| PWBCB8BL | Panduit Corp | Wire Ducting & Raceways Cantilever Bracket 8, BL, Panduit Wire |
| 0 | ||
| PWBPF4X18BL | Panduit Corp | Wire Ducting & Raceways Formed Tee Fitting 4 H x 18 W, Black |
| 0 | ||
| PRCSSS28/BL/50M | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| PICH28/BL/50M | ABB Group | Spiral Wraps, Sleeves, Tubing & Conduit | 0 | |||
| TTD8BL | Switchcraft Conxall | Audio Cables / Video Cables / RCA Cables TWIN 3 COND PTCH CRD | 0 | |||
| UTP6ASD18BL | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A (SD), Black UT RoHS : Compliant | 0 | |||
| UTPSP38BLY | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6, Black UTP Cabl RoHS : Compliant |
| 0 | ||
| PRCSSS28/BL/10M | ABB Group | Conduit Fittings & Accessories | 0 | |||
| PICH28/BL/10M | ABB Group | Spiral Wraps, Sleeves, Tubing & Conduit | 0 | |||
| PKG.M0.8BL.LA | LEMO connectors | Circular Push Pull Connectors | 0 | |||
 Ameya Holding Limited | IS61WV10248BLL-10TLI-TR | Integrated Silicon Solution Inc | IC SRAM 8MBIT 10NS 44TSOP | 247 | ||
| MMBZ5248BLT1G | onsemi | MMBZ5248BL Series 225 mW 10 mA 18 V SMT Zener Voltage Regulator - SOT-23-3 RoHS : Compliant | 102 | |||
 ComSIT USA | MMBZ5228BLT1G | onsemi | 225 MILLI WATT SOT-23 SURFACE MOUNT ZENER VOLTAGE REGULATOR Zener Diode, 3.9V V(Z), 5.13%, 0.225W, Silicon, Unidirectional, TO-236AB RoHS : Compliant | 12,000 | ||
| TCR3UF18BLMCT | Toshiba America Electronic Components | ULTRA LOW QUIESCENT CURRENT, FAST LOAD TRANSIENT 300 MILLIAMPERE CMOS LOW DROPOUT REGULATOR Fixed Positive LDO Regulator, 1.8V, 0.464V Dropout, CMOS, PDSO5 RoHS : Compliant | 11,980 | |||
| BC848BLT1G | onsemi | GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 30V V(BR)CEO, 1-Element, NPN, Silicon, TO-236 RoHS : Compliant | 9,965 | |||
| BC858BLT3G | onsemi | GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 30V V(BR)CEO, 1-Element, PNP, Silicon, TO-236AB RoHS : Compliant | 9,105 | |||
| BC848BLT | onsemi | NPN Bipolar Junction Transistor from ON Semiconductor, with 30V voltage, 100mA current, in SOT-23 package. RoHS : Not Compliant | 2,600 | |||
| MMBZ5258BLT1G | onsemi | Zener Diode, 36V V(Z), 5%, 0.225W, Silicon, Unidirectional, TO-236AB RoHS : Compliant | 1,584 | |||
| IS62WV1288BLL55TLI | Integrated Silicon Solution Inc | 128K X 8 LOW VOLTAGE, ULTRA LOW POWER CMOS STATIC RAM Standard SRAM, 128KX8, 55ns, CMOS, PDSO32 RoHS : Compliant | 1,500 | |||
| BC848BLT3G | onsemi | Small Signal Bipolar Transistor, 0.1A I(C), 30V V(BR)CEO, 1-Element, NPN, Silicon, TO-236 RoHS : Compliant | 997 | |||
| BC858BLT1G | onsemi | Small Signal Bipolar Transistor, 0.1A I(C), 30V V(BR)CEO, 1-Element, PNP, Silicon, TO-236AB RoHS : Compliant | 745 | |||
| HSMS2808BLKG | Avago Technologies | SURFACE MOUNT RF SCHOTTKY BARRIER DIODE Mixer Diode, Silicon RoHS : Compliant | 600 | |||
| CY62128BLL55ZXI | Cypress Semiconductor | MOBL 1-MBIT (128K X 8) STATIC RAM Standard SRAM, 128KX8, 55ns, CMOS, PDSO32 RoHS : Compliant | 129 | |||
| IS62LV1288BLL70TI | Integrated Silicon Solution Inc | 128K X 8 LOW POWER AND LOW VCC CMOS STATIC RAM Standard SRAM, 128KX8, 70ns, CMOS, PDSO32 RoHS : Not Compliant | 100 | |||
| LC3518BL15 | SANYO Semiconductor Co Ltd | 2K X 8 STANDARD SRAM Standard SRAM, 2KX8, 150ns, CMOS, PDIP24 RoHS : Not Compliant | 87 | |||
| HM628128BLFP7 | Hitachi Ltd | 1 M SRAM (128-KWORD X 8-BIT) Standard SRAM, 128KX8, 70ns, CMOS, PDSO32 RoHS : Not Compliant | 87 | |||
| HM628128BLP7 | Hitachi Ltd | 1 M SRAM (128-KWORD X 8-BIT) Standard SRAM, 128KX8, 70ns, CMOS, PDIP32 RoHS : Not Compliant | 12 | |||
 GLYN GmbH & Co. KG | WEO128128BLPP3N0001 | Winstar Display Co Ltd | PMOLED 1.18" 128x128 ,circular, yellow | 1 | ||
 Interstate Connecting Components | B2 (3X) 24/8 BLACK 20MM | SUMITOMO ELECTRIC Interconnect Products | B2 (3X) 24/8 BLACK CUSTOM | 587 | ||
| O2B2 3/8 BLACK 4FT | SUMITOMO ELECTRIC Interconnect Products | 114-10019 M23053/4-202-0 O2B2 3/8 BLACK 4FT |
| 505 | ||
| FP301VW-3/8-BLK-200FT | 3M Interconnect | 7100025735 80610219604 VW0.375BK200' |
| 105 | ||
| EPS300-1/2-48-BLK-75PCS | 3M Interconnect | 7000133616 80611601818 E30.500BK48L |
| 91 | ||
| EPS300-3/8-48-BLK-125PCS | 3M Interconnect | 7000133615 80611601800 E30.375BK48L |
| 83 | ||
| FP301-1/2-48-BLK-100PCS | 3M Interconnect | 7100083084 80611601206 FP0.500BK48L |
| 17 | ||
| EPS300-1-1/2-48-BLK-24PCS | 3M Interconnect | 7100054618 80611601842 E31.500BK48L |
| 3 | ||
| EPS200-1-48-BLK-24PCS | 3M Interconnect | 7100049967 80611600802 E21.000BK48L |
| 3 | ||
| FP301-1/4-48-BLK-12PCS | 3M Interconnect | 7100007366 80611472384 FP0.250BK48S |
| 2 | ||
| GTC030AQX28-BLP025M25L | Amphenol Industrial Operations | CONNECTOR, GTAS95234 TYPE,SQUA GTC030AQX28-BLP(025)(M25)(LC) | 0 | |||
| 10121505-000408BLF | Amphenol FCi | HPCE VR 2LP8S-10121505-000408B | 0 | |||
| 120-125-28BL | Glenair Inc | CONDUIT UNSHIELDED | 0 | |||
| AB-CD08BL-CDBR-QD010 | Amphenol LTW Technology | X-LOK, MIDDLE SIZE, PLASTIC, 5 OVERMOLDED | 0 | |||
| AB-CBD08BL-CBDBR-QFA05 | Amphenol LTW Technology | X-LOK, MIDDLE SIZE, PLASTIC, 1 OVERMOLDED | 0 | |||
| 10121505-320008BLF | Amphenol FCi | HPCE VR PF 8HP8S-10121505-3200 RoHS : Unknown | 0 | |||
 PEI Genesis | O2B2S 1/8 BLACK | SUMITOMO ELECTRIC Interconnect Products |
| 30,000 | ||
| W3B2S 3/8 BLACK SPL | SUMITOMO ELECTRIC Interconnect Products |
| 5,000 | |||
| GTC06EQX28-BLS-025-LC | Amphenol Corporation |
| 4 | |||
| GTC030EQX28-BLP-025-LC | Amphenol Corporation |
| 0 | |||
| GTCL030AQX28-BLPW-025-LC | Amphenol Corporation |
| 0 | |||
| GTC06AQX28-BLS-025-M25-LC | Amphenol Corporation |
| 0 | |||
| GTC030AQX28-BLP-025-M25-LC | Amphenol Corporation |
| 0 | |||
| GTC08RMIQX28BLS-025-LC-M32 | Amphenol Corporation |
| 0 | |||
| GTC030AQX28-BLP-025-LC | Amphenol Corporation |
| 0 | |||
| GTC08RMIQX28BLSW-025-LC-M32 | Amphenol Corporation |
| 0 | |||
 PUI | CBW58-BL-40A-5X | 1,296 | ||||
| CBW58-BL-50A-5X | 419 | |||||
 Chip 1 Exchange | BC858BLT1 | onsemi | INSTOCK RoHS : Not Compliant | 78,788 | ||
| BC848BLT1 | INSTOCK | 34,715 | ||||
| MMBZ5268BLT1 | INSTOCK | 5,173 | ||||
| MMBZ5238BLT1G | onsemi | INSTOCK RoHS : Compliant | 3,640 | |||
| SZMMBZ5248BLT1G | onsemi | INSTOCK RoHS : Compliant | 3,603 | |||
| BC858BLT1 | onsemi | INSTOCK RoHS : Not Compliant | 3,000 | |||
| MMBZ5248BLT1G | INSTOCK | 3,000 | ||||
| BC848BLT1G | INSTOCK | 2,383 | ||||
| L-KLS8-01108-E2508-BLUE | INSTOCK | 2,061 | ||||
| MPI002/28/BL | Bulgin | INSTOCK RoHS : Compliant | 1,517 | |||
| AMMP-6408-BLKG | Avago Technologies | INSTOCK RoHS : Compliant | 439 | |||
| APT5018BLL | INSTOCK | 360 | ||||
| LC3518BL-15 | SANYO Semiconductor Co Ltd | INSTOCK | 62 | |||
| CJ588BL | INSTOCK | 48 | ||||
| CY62128BLL-70ZAI | INSTOCK | 11 | ||||
 Avnet Abacus | 86303638BLF | Amphenol Corporation | D Sub Backshell UNC 440 DA 180 Nylon Polyamide Body (Alt: 86303638BLF) RoHS : Compliant | 1,400 | ||
| 70518BLF | Amphenol Corporation | Dust Cap Cover Dust Cap 9 Position DSub Plug Connectors PP Polypropylene Body (Alt: 70518BLF) RoHS : Compliant | 1,000 | |||
| DX0998/BL | Bulgin | (Alt: DX0998/BL) RoHS : Compliant | 0 | |||
| 39-138 BLK | Grayhill Inc | (Alt: 39-138 BLK) RoHS : Compliant | 0 | |||
| B-20L-48B-L | KEMET Corporation | Ferrite Core Cylindrical 48 mm Length 24 mm ID 48 mm OD (Alt: B-20L-48B-L) RoHS : Compliant | 0 | |||
| MPI001/28/BL | Bulgin | Switch Push Button SPST Flush Round Button 005A 24VDC Quick Connect Panel Mount (Alt: MPI001/28/BL) RoHS : Compliant | 0 | |||
| MPI001/28/BL/12 | Bulgin | Switch Push Button OFF ON SPSTNO Round Button Momentary Contact 50VAC 50VDC Screw Panel Mount (Alt: MPI001/28/BL/12) RoHS : Compliant | 0 | |||
| MPI002/28/BL/24 | Bulgin | Vandal Resistant Switch Blue 50mA 24VDC (Alt: MPI002/28/BL/24) RoHS : Compliant | 0 | |||
| MLAYT168BLD474KTNA01 | TAIYO YUDEN | SMD Multilayer Ceramic Capacitor 047 uF 25 V 0603 1608 Metric 10 X5R MLAY Series 16 mm - Tape and Reel (Alt: MLAYT168BLD474KTNA01) RoHS : Compliant | 0 | |||
| TFM141208BLE-R47MTCA | TDK Corporation | Power Inductor SMD 470 nH 38 A Thin Film 39 A TFMBLE Series (Alt: TFM141208BLE-R47MTCA) RoHS : Not Compliant | 0 | |||
| MSAYU168BLD224MTNA01 | TAIYO YUDEN | SMD Multilayer Ceramic Capacitor 022 uF 50 V 0603 1608 Metric 20 X5R MSAY Series 16 mm - Tape and Reel (Alt: MSAYU168BLD224MTNA01) RoHS : Compliant | 0 | |||
| MLAYT168BLD105KTNA01 | TAIYO YUDEN | SMD Multilayer Ceramic Capacitor 1 uF 25 V 0603 1608 Metric 10 X5R MLAY Series 16 mm - Tape and Reel (Alt: MLAYT168BLD105KTNA01) RoHS : Compliant | 0 | |||
| MLAYT168BLD105MTNA01 | TAIYO YUDEN | SMD Multilayer Ceramic Capacitor 1 uF 25 V 0603 1608 Metric 20 X5R MLAY Series 16 mm - Tape and Reel (Alt: MLAYT168BLD105MTNA01) RoHS : Compliant | 0 | |||
| MSAYT168BLD474KTNA01 | TAIYO YUDEN | SMD Multilayer Ceramic Capacitor 047 uF 25 V 0603 1608 Metric 10 X5R MSAY Series 16 mm - Tape and Reel (Alt: MSAYT168BLD474KTNA01) RoHS : Compliant | 0 | |||
| TFM201208BLE-R33MTCF | TDK Corporation | (Alt: TFM201208BLE-R33MTCF) RoHS : Not Compliant | 0 | |||
Avnet Asia | IS61WV5128BLL-10TLI | Integrated Silicon Solution Inc | SRAM, Asynchronous SRAM, 4 Mbit, 512K x 8bit, TSOP-II, 44 Pins, 2.4 V (Alt: IS61WV5128BLL-10TLI) RoHS : Compliant | 0 | ||
| IS66WVS1M8BLL-104NLI | Integrated Silicon Solution Inc | PSRAM Asynchronous 8Mbit 1M X 8 7ns 8-Pin SOIC (Alt: IS66WVS1M8BLL-104NLI) RoHS : Compliant | 0 | |||
| 10121505-000408BLF | Amphenol Corporation | Conn Power Card Edge 4Power/8Signal POS 2.54mm/1.27mm Press Fit ST Through Hole (Alt: 10121505-000408BLF) RoHS : Compliant | 0 | |||
| IS61WV10248BLL-10TLI | Integrated Silicon Solution Inc | (Alt: IS61WV10248BLL-10TLI) RoHS : Compliant | 0 | |||
| IS62WV5128BLL-55T2LI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 3.3V 4M-Bit 512K x 8 55ns 32-Pin TSOP-II T/R (Alt: IS62WV5128BLL-55T2LI-TR) RoHS : Compliant | 0 | |||
| IS62WV1288BLL-55HLI | Integrated Silicon Solution Inc | SRAM, 1 Mbit, 128K x 8bit, 32-Pin, STSOP-I (Alt: IS62WV1288BLL-55HLI) RoHS : Compliant | 0 | |||
| NCP4318BLCDR2G | onsemi | Dual Channel Synchronous Rectification Controller Dual Channel Synchronous Rectification Controller_suffix BLC (Alt: NCP4318BLCDR2G) RoHS : Compliant | 0 | |||
| IS67WVS2M8BLL-104NLA2 | Integrated Silicon Solution Inc | (Alt: IS67WVS2M8BLL-104NLA2) RoHS : Compliant | 0 | |||
| BC848BLT1G | onsemi | NPN Bipolar Transistor. (Alt: BC848BLT1G) RoHS : Compliant |
| 0 | ||
| IS66WVS1M8BLL-104NLI-TR | Integrated Silicon Solution Inc | PSRAM Asynchronous 8Mbit 1M X 8 7ns 8-Pin SOIC T/R (Alt: IS66WVS1M8BLL-104NLI-TR) RoHS : Compliant | 0 | |||
| IS62WV5128BLL-55HLI | Integrated Silicon Solution Inc | (Alt: IS62WV5128BLL-55HLI) RoHS : Compliant | 0 | |||
| IS62WV1288BLL-55TLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 3.3V 1M-Bit 128K x 8 55ns 32-Pin TSOP-I T/R (Alt: IS62WV1288BLL-55TLI-TR) RoHS : Compliant | 0 | |||
| IS61WV5128BLL-10TLI-TR | Integrated Silicon Solution Inc | (Alt: IS61WV5128BLL-10TLI-TR) RoHS : Compliant | 0 | |||
| PAM2808BLBR | Diodes Incorporated | LED DRVR 1-CH 1.5A 8-Pin SOP EP T/R (Alt: PAM2808BLBR) RoHS : Compliant | 0 | |||
| 70518BLF | Amphenol Corporation | (Alt: 70518BLF) RoHS : Compliant | 0 | |||
 Avnet Silica | BC858BLT3G | onsemi | PNP Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: BC858BLT3G) RoHS : Compliant | 380,000 | ||
| L128-BLU1003500000 | Lumileds | (Alt: L128-BLU1003500000) RoHS : Compliant | 40,000 | |||
| MMBZ5248BLT1G | onsemi | Zener Single Diode 18 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5248BLT1G) RoHS : Compliant | 15,000 | |||
| IS62WV10248BLL-55BLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 3V 8MBit 1M x 8 55ns 48Pin MiniBGA TR (Alt: IS62WV10248BLL-55BLI-TR) RoHS : Compliant | 5,000 | |||
| IS61WV5128BLL-10TLI | Integrated Silicon Solution Inc | SRAM Asynchronous SRAM 4 Mbit 512K x 8bit TSOPII 44 Pins 24 V (Alt: IS61WV5128BLL-10TLI) RoHS : Compliant | 270 | |||
| IS62WV2568BLL-55HLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 33V 2MBit 256K x 8 55ns 32Pin STSOPI (Alt: IS62WV2568BLL-55HLI) RoHS : Compliant | 234 | |||
| IS66WVS2M8BLL-104NLI | Integrated Silicon Solution Inc | (Alt: IS66WVS2M8BLL-104NLI) RoHS : Compliant | 100 | |||
| SZMMBZ5228BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5228BLT1G) RoHS : Compliant | 0 | |||
| IS62WV1288BLL-55HLI | Integrated Silicon Solution Inc | SRAM 1 Mbit 128K x 8bit 32Pin STSOPI (Alt: IS62WV1288BLL-55HLI) RoHS : Compliant | 0 | |||
| IS66WVS1M8BLL-104NLI | Integrated Silicon Solution Inc | (Alt: IS66WVS1M8BLL-104NLI) RoHS : Compliant | 0 | |||
| IS61WV10248BLL-10TLI | Integrated Silicon Solution Inc | SRAM Asynchronous SRAM 8 Mbit 1M x 8bit TSOPII 44 Pins 24 V (Alt: IS61WV10248BLL-10TLI) RoHS : Compliant | 0 | |||
IS62WV10248BLL-55BLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 33V 8MBit 1M x 8 55ns 48Pin MiniBGA (Alt: IS62WV10248BLL-55BLI) RoHS : Compliant | 0 | |||
| IS67WVS4M8BLL-104TLA2 | Integrated Silicon Solution Inc | (Alt: IS67WVS4M8BLL-104TLA2) RoHS : Compliant | 0 | |||
| IS61WV5128BLL-10BLI-TR | Integrated Silicon Solution Inc | 4MBHIGHSPEEDLOW POWERASYNC512K X 88NS33VOR 10NS24V36V36 BALL MBGA 8X10 MM ROHS (Alt: IS61WV5128BLL-10BLI-TR) RoHS : Compliant | 0 | |||
| IS62WV5128BLL-55T2LI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 33V 4MBit 512K x 8 55ns 32Pin TSOPII TR (Alt: IS62WV5128BLL-55T2LI-TR) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | MMBZ5228BLT1G | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,695 | |
| MMBZ5238BLT1 | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,600 | ||
| MMBZ5238BLT1 | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,600 | ||
| BC848BLT1G | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,580 | ||
| MMBZ5258BLT1 | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,500 | ||
| C08BL242X-5ZN-X0T | Dielectric Laboratories Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,000 | ||
| CPX-100-1/8-BLACK-1000 | DSG-Canusa | IN STOCK SHIP TODAY | 400 | |||
| FP-301-1/8-BL500 | 3M | IN STOCK SHIP TODAY |
| 132 | ||
| EPS-400-.450-48-BLACK | 3M | IN STOCK SHIP TODAY |
| 68 | ||
| EPS-300-3/4-48-BLACK | 3M | IN STOCK SHIP TODAY |
| 35 | ||
M5M44258BL-7 | Mitsubishi Electric | IN STOCK SHIP TODAY RoHS : Not Compliant | 14 | |||
| DG-10X8-BLANK | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 7 | |||
HM628128BLFP-8 | Hitachi Ltd | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| YESA3528BL | YESA | IN STOCK SHIP TODAY |
| 4 | ||
| IS61WV5128BLL-10TLI | Integrated Silicon Solution Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
 DB Roberts | HWH1/4-20X5/8-GR8-BLKPHOS | HEX WASHER HEAD SCR | Hex Washer Head Screw |
| 3,953 | |
| VC-140-8-BLK | Caplugs |
| 2,100 | |||
| HHM5/16-18X3-GR8-BLK-PHOS | HEX HEAD MACHINE SC | Hex Head Machine Screw |
| 499 | ||
| MC-28/BLK | Sugatsune Kogyo Co Ltd |
| 206 | |||
| 29F038BL | Essentra Components | FLOWERETTE PRESS LOCK THUMB SC | 0 | |||
| 3728BLACK | Essentra Components | 0 | ||||
| HG-MF08-BL | Sugatsune Kogyo Co Ltd | 0 | ||||
| 3628BLACK | Essentra Components | 0 | ||||
| 29R008BL | Essentra Components | ROUND PRESS LOCK THUMB SCREW K | 0 | |||
| HG-JHM14-S-8BL | Sugatsune Kogyo Co Ltd | MORTISE MOUNT SOFT CLOSING HIN | 0 | |||
| GH-34/8/BL-P | Sugatsune Kogyo Co Ltd | BLACK GLASS DOOR IND. BAGGED | 0 | |||
| 4213-3118-BLNK-A-0 | RAF Electronic Hardware | 0 | ||||
| CHC-S18BL | Sugatsune Kogyo Co Ltd | SPLIT CABLE GROMMET | 0 | |||
| RKW-8-8-BL | Essentra Components | CABLE TIE, HOOK & LOOP W/ | 0 | |||
| RKW-12-18-BL | Essentra Components | CABLE TIE, HOOK LOOP, BLUE | 0 | |||
 EBV Elektronik | BC858BLT3G | onsemi | PNP Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: BC858BLT3G) RoHS : Compliant | 60,000 | ||
| MMBZ5238BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: MMBZ5238BLT1G) RoHS : Compliant | 51,000 | |||
| TCR3UF18B,LM(CT | Toshiba America Electronic Components | LDO Regulator Positive 18V 300mA 5Pin SOT25 (Alt: TCR3UF18B,LM(CT) RoHS : Compliant | 3,000 | |||
| BC848BLT3G | onsemi | NPN Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: BC848BLT3G) RoHS : Compliant | 0 | |||
| BC848BLT1G | onsemi | NPN Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: BC848BLT1G) RoHS : Compliant | 0 | |||
| APT5018BLLG | Microchip Technology Inc | (Alt: APT5018BLLG) RoHS : Compliant | 0 | |||
| SBC848BLT1G | onsemi | NPN Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: SBC848BLT1G) RoHS : Compliant | 0 | |||
| APT10078BLLG | Microchip Technology Inc | (Alt: APT10078BLLG) RoHS : Compliant | 0 | |||
| MMBZ5228BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: MMBZ5228BLT1G) RoHS : Compliant | 0 | |||
| MMBZ5268BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: MMBZ5268BLT1G) RoHS : Compliant | 0 | |||
| NSVBC858BLT1G | onsemi | PNP Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: NSVBC858BLT1G) RoHS : Compliant | 0 | |||
| NCP4318BLCDR2G | onsemi | Dual Channel Synchronous Rectification Controller Dual Channel Synchronous Rectification Controllersuffix BLC (Alt: NCP4318BLCDR2G) RoHS : Compliant | 0 | |||
| SZMMBZ5228BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5228BLT1G) RoHS : Compliant | 0 | |||
| SZMMBZ5248BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5248BLT1G) RoHS : Compliant | 0 | |||
| SZMMBZ5248BLT3G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5248BLT3G) RoHS : Compliant | 0 | |||
 Flip Electronics | NCP4318BLCDR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 190,000 | |
| MMBZ5248BLT3G | onsemi | Stock RoHS : Compliant | 110,000 | |||
| SZMMBZ5258BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 86,975 | |||
| SZMMBZ5238BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 74,220 | |||
| FDB024N08BL7 | onsemi | Stock, Ship Today RoHS : Compliant | 56,000 | |||
| CY62128BLL-70SXC | Cypress Semiconductor | Stock RoHS : Compliant | 26,545 | |||
| CY62128BLL-70SC | Cypress Semiconductor | Stock RoHS : Not Compliant | 26,545 | |||
| MMBZ5258BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 12,000 | |||
| MMBZ5248BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 9,000 | |||
| BC858BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 2,700 | |||
 Master Electronics | FIT2213/8-BLACK-25X4 | Alpha Wire | FIT-221 3/8 BLACK - 25x4ft/Pkg RoHS : Compliant |
| 2,645 | |
| FIT221V3/8-BLACK-25X4 | Alpha Wire | A flame-retardant irradiated polyolefin heat shrink tubing with a 3/8-inch supplied diameter and a 2:1 shrink ratio. RoHS : Compliant |
| 1,340 | ||
| F3001/8-BLACK-100 | Alpha Wire | FIT3001/8 BLACK 25X4 FT RoHS : Compliant |
| 216 | ||
| 25098-BLACK-1 | Alpha Wire | ALPHA 25098 BK BULK RoHS : Compliant |
| 14 | ||
| F221B1/8-BLACK-1000 | Alpha Wire | FIT221B1/8 BLACK 250X4 FT RoHS : Compliant |
| 9 | ||
| G1301/8-BLACK-200 | Alpha Wire | GRP1301/8 BLACK 200 FT RoHS : Compliant |
| 1 | ||
| HLCD-20-10.38-BLS-TR-2 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-30-35.68-BL-TR-2 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-40-06.88-BLS-TD-1-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PRCSSS28/BL/50M | Thomas & Betts | Adaptaflex® - PRSS - High Specification Braided Conduit - Coarse Conduit Pitch - NC Size 28mm - NW Conduit Size 23 - Out Dia 30.0mm - In Dia 21.7mm - Min Bend Radius 55mm - Reel Length 50m - Material Modified Polyamide (Nylon) 6 - Color Metallic RoHS : Compliant |
| 0 | ||
| 19348-BLK-250 | Belden Inc | Portable Cordage Polyvinyl Chloride 3Conductors 18AWG 8.33mm 300VAC Black 76.2m Reel RoHS : Compliant |
| 0 | ||
| PRCSSS28/BL/10M | Thomas & Betts | Adaptaflex® - PRSS - High Specification Braided Conduit - Coarse Conduit Pitch - NC Size 28mm - NW Conduit Size 23 - Out Dia 30.0mm - In Dia 21.7mm - Min Bend Radius 55mm - Reel Length 10m - Material Modified Polyamide (Nylon) 6 - Color Metallic RoHS : Compliant |
| 0 | ||
| 37508-BLK-50 | Belden Inc | Rubber Lead Wire 8AWG (84x27) Tinned Copper EPDM Insulation AWM 3499 7500V 150C - 50 ft RoHS : Compliant |
| 0 | ||
| PJ8BL | Hubbell Premise Wiring | RoHS : Compliant |
| 0 | ||
| F2213/8-BL004 | Alpha Wire | FIT2213/8 BLUE 200 FT RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8818/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/BL, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/BL is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax. | 495 | ||
| PE3C8748/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-BL, RF Cable Type: Belden 4855R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable Using 75 Ohm 4855R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4855R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4855R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/BL, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/BL is built with belden 4855R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/BL can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4855R-BL coax. | 419 | |||
| PE3C8818/BL-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/BL-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/BL-36 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-BL coax. |
| 105 | ||
| PE3C8818/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/BL-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/BL-120 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax. |
| 105 | ||
| PE3C8748/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-BL, RF Cable Type: Belden 4855R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4855R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/BL-12, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/BL-12 is built with belden 4855R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/BL-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4855R-BL coax. |
| 89 | ||
| PE3C8748/BL-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-BL, RF Cable Type: Belden 4855R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4855R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4855R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4855R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/BL-72, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/BL-72 is built with belden 4855R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/BL-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4855R-BL coax. |
| 89 | ||
| PE3C8748/BL-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-BL, RF Cable Type: Belden 4855R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4855R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/BL-36, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/BL-36 is built with belden 4855R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/BL-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4855R-BL coax. |
| 89 | ||
| PE3C8748/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-BL, RF Cable Type: Belden 4855R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4855R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/BL-120, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/BL-120 is built with belden 4855R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/BL-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-BL coax. |
| 89 | ||
| PE3W05058/BL/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMP Female to TNC Male Cable Using PE-P086HF Coax with HeatShrink., Pasternack’s PE3W05058/BL/HS SMP female to TNC male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMP cable connection on one end and a TNC cable connection on the other. Our SMP to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3W05058/BL/HS can also be known as a SMP jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W05058/BL/HS RF cable has an FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This PE3W05058/BL/HS SMP jack to TNC plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with SMP to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05058/BL/HS can also be used in the other direction and will be a TNC male to SMP female cable assembly if the opposite connectivity is required. This SMP jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to TNC cable assembly for quick shipment worldwide. Variations of SMP and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to TNC RF cable assembly as per your requirements. | 0 | |||
| PE348/BLHS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 12 Inch Length Using PE-P142LL Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 12 inch length using PE-P142LL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 12 inch length using PE-P142LL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. PE348/BLHS-12 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE348/BLHS-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE348/BLHS-12 can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead low loss cable 12 inch length using PE-P142LL coax with heatshrink. |
| 0 | ||
| PE348/BLHS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 24 Inch Length Using PE-P142LL Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 24 inch length using PE-P142LL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 24 inch length using PE-P142LL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. PE348/BLHS-24 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE348/BLHS-24 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE348/BLHS-24 can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead low loss cable 24 inch length using PE-P142LL coax with heatshrink. |
| 0 | ||
| PE348/BLHS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Bulkhead Low Loss Cable Using PE-P142LL Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable using PE-P142LL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable using PE-P142LL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. PE348/BLHS can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE348/BLHS is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE348/BLHS can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead low loss cable using PE-P142LL coax with heatshrink. | 0 | |||
| PE348/BLHS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 36 Inch Length Using PE-P142LL Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 36 inch length using PE-P142LL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 36 inch length using PE-P142LL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. PE348/BLHS-36 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE348/BLHS-36 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE348/BLHS-36 can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead low loss cable 36 inch length using PE-P142LL coax with heatshrink. |
| 0 | ||
| PE3C9418/BL/HS | Pasternack Enterprises | 0 | ||||
| PE348/BLHS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to TNC Female Bulkhead Low Loss Cable 48 Inch Length Using PE-P142LL Coax with HeatShrink., Radio frequency assembly TNC male to TNC female bulkhead low loss cable 48 inch length using PE-P142LL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC female bulkhead low loss cable 48 inch length using PE-P142LL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. PE348/BLHS-48 can also be known as a low loss TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE348/BLHS-48 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE348/BLHS-48 can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead low loss cable 48 inch length using PE-P142LL coax with heatshrink. |
| 0 | ||
 Vyrian | MAX6478BL22AD2 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 12,078 | ||
| MAX6478BL24BD3 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 11,376 | |||
| MAX6478BL28AD2 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, 0.21V Dropout, BICMOS, PBGA6 RoHS : Not Compliant | 10,876 | |||
| IS61WV10248BLL-10TLI | Integrated Silicon Solution | Standard SRAM, 1MX8, 10ns, CMOS, PDSO44 | 10,826 | |||
| MAX6478BL285AD3 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 10,734 | |||
| MAX6478BL17AD2 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 10,699 | |||
| MAX6478BL30BD2 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, 0.19V Dropout, BICMOS, PBGA6 RoHS : Not Compliant | 10,658 | |||
| MGA-634P8-BLKG | Broadcom Limited | Narrow Band Medium Power Amplifier, 1500MHz Min, 2300MHz Max, 1 Func RoHS : Compliant | 8,877 | |||
| MAX6478BL17BD3 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 7,909 | |||
| MAX6478BL29BD4 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 7,833 | |||
| MAX6478BL17BD1 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 7,318 | |||
| PZU18BL | Nexperia | Zener Diode, 18V V(Z), 5%, 0.25W, Silicon, Unidirectional RoHS : Compliant | 6,749 | |||
| MAX6478BL16AD3 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 6,677 | |||
| MGA-638P8-BLKG | Broadcom Limited | Wide Band Medium Power Amplifier, 1 Func, GAAS RoHS : Compliant | 4,526 | |||
| FIT-221-1/8BL002 | Alpha Wire | HEAT SHRINK TUBE, POLYOLEFIN, 3.175 ID Before Shrink, 2:1 Shrink Ratio, BLUE RoHS : Compliant | 848 | |||
 Waytek, Inc. | CBW58-BL-30A-5X | OptiFuse | 30A Panel Mount CB 58 Series Circuit Breaker M11 Bushing LIKE CARLING CLB |
| 378 | |
| CBW58-BL-40A-5X | OptiFuse | 40A Panel Mount CB 58 Series Circuit Breaker M11 Bushing LIKE CARLING CLB |
| 318 | ||
| CBW58-BL-50A-5X | OptiFuse | 50A Panel Mount CB 58 Series Circuit Breaker M11 Bushing LIKE CARLING CLB |
| 181 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand