888-3-R330F Price, nhà phân phối, Stock

Key Specifications, Connector Series 1: UMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. UMCX Plug to MCX Jack Bulkhead Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly UMCX plug to MCX jack bulkhead cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UMCX plug to MCX jack bulkhead cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UMCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle UMCX cable connection on one end and MCX bulkhead cable connection on the other. Our right angle UMCX to MCX cable assemblies have a plug gender on end 1 and jack on end 2. This UMCX to MCX cable is a plug to jack coax assembly, PE38889-12, can also be known as a right angle UMCX male to MCX female cable assembly and will be shipped same-day as it is purchased. UMCX male to MCX female cable assembly PE38889-12 is built with RG178 which is a flexible coax type. The Pasternack flexible UMCX cable assembly is manufactured with right angle UMCX to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UMCX right angle plug to MCX jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38889-12 can also be used in the other direction and will be MCX jack bulkhead to right angle UMCX plug cable assembly if the opposite connectivity is required. UMCX right angle male to MCX female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UMCX to MCX cable assembly for quick shipment worldwide. Variations of UMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UMCX plug to MCX jack bulkhead cable 12 inch length using RG178 coax.

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

179

PE38889-24

Pasternack Enterprises

Key Specifications, Connector Series 1: UMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. UMCX Plug to MCX Jack Bulkhead Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly UMCX plug to MCX jack bulkhead cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UMCX plug to MCX jack bulkhead cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UMCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle UMCX cable connection on one end and MCX bulkhead cable connection on the other. Our right angle UMCX to MCX cable assemblies have a plug gender on end 1 and jack on end 2. This UMCX to MCX cable is a plug to jack coax assembly, PE38889-24, can also be known as a right angle UMCX male to MCX female cable assembly and will be shipped same-day as it is purchased. UMCX male to MCX female cable assembly PE38889-24 is built with RG178 which is a flexible coax type. The Pasternack flexible UMCX cable assembly is manufactured with right angle UMCX to MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UMCX right angle plug to MCX jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38889-24 can also be used in the other direction and will be MCX jack bulkhead to right angle UMCX plug cable assembly if the opposite connectivity is required. UMCX right angle male to MCX female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UMCX to MCX cable assembly for quick shipment worldwide. Variations of UMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UMCX plug to MCX jack bulkhead cable 24 inch length using RG178 coax.

1 : $128.99
25 : $122.54
50 : $116.09
100 : $110.93

134

PE38881-3

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 3 inches. SMA Male to UMCX Plug Cable 3 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to UMCX plug cable 3 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to UMCX plug cable 3 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and UMCX cable connection on the other. Our SMA to UMCX cable assemblies have a male gender on end 1 and plug on end 2. This SMA to UMCX cable is a male to plug coax assembly, PE38881-3, can also be known as a SMA plug to UMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to UMCX male cable assembly PE38881-3 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to UMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38881-3 can also be used in the other direction and will be UMCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to UMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to UMCX plug cable 3 inch length using RG178 coax.

1 : $84.59
25 : $80.36
50 : $76.13
100 : $72.75

PE3C5888-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum SMA Male to SMA Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum SMA male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum SMA male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C5888-150CM, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C5888-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum SMA male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE44888

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: BNC, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: 4 Hole Flange, Minimum Frequency: DC, Maximum Frequency: 2 GHz, Interface Type 1: PE-047SR, Interface Type 2: PE-SR047FL, Interface Type 3: PE-SR047AL. BNC Female Connector Solder Attachment 4 Hole Flange Mount for PE-047SR, PE-SR047FL, PE-SR047AL, IP68 Rated. PE44888 BNC female 4 hole flange coaxial connector has an interface type of PE-047SR, PE-SR047FL, PE-SR047AL and a 50 Ohm impedance. Pasternack BNC female 4 hole flange connector uses shield/contact solder/solder as an attachment method. Our female BNC coaxial connector provides a minimum frequency of DC and a maximum frequency of 2 GHz. The Pasternack BNC female 4 hole flange coaxial connector has a PTFE dielectric type and a VSWR of 1.09. The Pasternack BNC coaxial connector has a passivated stainless steel body. Our PE44888 BNC connector uses brass contact. This BNC female 4 hole flange coaxial RF connector is REACH compliant. This Pasternack female BNC 4 hole flange connector will ship the same day as purchased. Our 4 hole flange BNC female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BNC connector cable assemblies that will ship the same day as well.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

PE3W08888

Pasternack Enterprises

PE38888

Pasternack Enterprises

PE3W18888LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Plug, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Plug, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW400, RF Cable Type: LMR-LW400, RF Cable Impedance: 50 Ohm. Reverse Polarity N Plug to Reverse Polarity N Plug Cable Using LMR-LW400 Coax, LF Solder. PE3W18888LF is a reverse polarity N plug to reverse polarity N plug cable using LMR-LW400 coax. This Pasternack reverse polarity N plug to reverse polarity N plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity plug N to reverse polarity plug N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18888LF N reverse polarity plug to N reverse polarity plug cable assembly is constructed with LMR-LW400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W08886-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMP Female Right Angle to SMP Female Right Angle Cable 50 cm Length Using PE-SR405FLJ Coax., Radio frequency assembly SMP female right angle to SMP female right angle cable 50 cm length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to SMP female right angle cable 50 cm length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3W08886-50CM, can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W08886-50CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable 50 cm length using PE-SR405FLJ coax.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

PE3W18881

Pasternack Enterprises

PE3W20888

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Smooth Bore SMP Male Bulkhead to 2.92mm Male Cable Using PE-P086HF Coax. PE3W20888 is a SMP male bulkhead to 2.92mm male cable using PE-P086HF coax. This Pasternack SMP male bulkhead to 2.92mm male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm 2.92mm for connector 2. Our male SMP bulkhead to male 2.92mm cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20888 SMP male bulkhead to 2.92mm male cable assembly is constructed with PE-P086HF coax.

PE3C0888

Pasternack Enterprises

PE3W08882-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: MHV, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MHV Female Bulkhead to MHV Female Bulkhead Cable 36 Inch Length Using RG58 Coax., Radio frequency assembly MHV female bulkhead to MHV female bulkhead cable 36 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHV female bulkhead to MHV female bulkhead cable 36 inch length using RG58 coax, MHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV bulkhead cable connection on one end and MHV bulkhead cable connection on the other. Our MHV to MHV cable assemblies have a female gender on end 1 and female on end 2. PE3W08882-36 can also be known as a MHV jack to MHV jack cable assembly and will be shipped same-day as it is purchased. MHV jack to MHV jack cable assembly PE3W08882-36 is built with RG58 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency MHV female bulkhead to MHV female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MHV jack bulkhead to MHV jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV female bulkhead to MHV female bulkhead cable 36 inch length using RG58 coax.

1 : $203.99
25 : $193.79
50 : $183.59
100 : $175.43

PE3W12888

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Cable Using LMR-195 Coax. PE3W12888 is a SMA female to SMA female cable using LMR-195 coax. This Pasternack SMA female to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12888 SMA female to SMA female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE34888/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. N Male to MCX Plug Right Angle Cable Using RG174 Coax with HeatShrink. PE34888/HS is a N male to MCX plug right angle cable using RG174 coax. This Pasternack N male to MCX plug right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MCX for connector 2. N to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34888/HS N male to MCX plug right angle cable assembly is constructed with RG174 coax.

Vyrian

1688887

Phoenix Contact

D Subminiature Connector, 15 Contact(s), Female, Solder Terminal, Socket
RoHS : Compliant

8,950

CSD58888Q5D

Texas Instruments

5,250

1888807

Phoenix Contact

Barrier Strip Terminal Block, 13.5A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

3,000

MAX8888EZK32-T

Maxim Integrated Products

Fixed Positive LDO Regulator, 3.2V, 0.2V Dropout, BICMOS, PDSO5
RoHS : Not Compliant

2,050

MAX8888EZK17-T

Maxim Integrated Products

Fixed Positive LDO Regulator, 1.7V, 0.2V Dropout, BICMOS, PDSO5
RoHS : Not Compliant

1,850

MAX8888EZK23-T

Maxim Integrated Products

Fixed Positive LDO Regulator, 2.3V, 0.2V Dropout, BICMOS, PDSO5
RoHS : Not Compliant

1,750

1988888

Phoenix Contact

Barrier Strip Terminal Block, 17.5A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

1,500

MAX8888EZK28-T

Maxim Integrated Products

Fixed Positive LDO Regulator, 2.8V, 0.2V Dropout, BICMOS, PDSO5
RoHS : Not Compliant

1,400

MAX8888EZK19-T

Maxim Integrated Products

Fixed Positive LDO Regulator, 1.9V, 0.2V Dropout, BICMOS, PDSO5
RoHS : Not Compliant

1,350

MAX8888EZK26-T

Maxim Integrated Products

Fixed Positive LDO Regulator, 2.6V, 0.2V Dropout, BICMOS, PDSO5
RoHS : Not Compliant

1,200

MAX8888EZK21-T

Maxim Integrated Products

Fixed Positive LDO Regulator, 2.1V, 0.2V Dropout, BICMOS, PDSO5
RoHS : Not Compliant

1,000

SM288888PMSR

Texas Instruments

750

MAX8888EZK33+

Analog Devices Inc

Fixed Positive LDO Regulator, 3.3V, 0.2V Dropout, BICMOS, PDSO5
RoHS : Compliant

670

MT8888CN1

Microchip Technology Inc

RoHS : Compliant

340

5962-01-306-8888

Analog Devices Inc

Operational Amplifier, 4 Func, 3500uV Offset-Max, BIPolar, CDIP14
RoHS : Not Compliant

300

Waytek, Inc.

131888-91

General Cable Technologies Corporation

16GA GXL Gray Cross-Link Automotive Wire XLPE -51C to 125C

500 : $0.1411
1,000 : $0.1274
2,500 : $0.1068
5,000 : $0.0972

114,000

1418884-1

TE Connectivity

AMP 1.5 Female 16-14GA Reel
RoHS : Compliant

4,500 : $0.268
22,500 : $0.2633

58,500

7100163888

The 3M 71M-250-32-NL Scotchlok male quick disconnect fits 22-18 Ga. wire and a .250" x .032" tab interface. Fully red nylon insulation protects the tin-plated copper terminal, while a 221F (105C) operating rating supports demanding wiring environments and serviceable push-on connections.

50 : $0.256
200 : $0.2423
500 : $0.2251
1,000 : $0.216

28,660

1418884

TE Connectivity

The TE Connectivity 1418884 AMP MCP 1.5K female terminal is a loose-piece contact for 16-14 Ga. wire. Its stamped-and-formed receptacle design supports TE's Single Wire Sealing System for dependable sealed connector assemblies. Designed for compatible HDSCS housings, this terminal provides a precise crimp connection for commercial vehicle and off-road wiring applications.

10 : $0.8673
50 : $0.7735
100 : $0.7025
200 : $0.6796
500 : $0.6568
1,000 : $0.6315

12,136

0888650.U-2M8

Littelfuse Inc

High Performance 120V MEGA Fuse, 650A
RoHS : Compliant

1 : $6.73
50 : $5.49
100 : $5.13
200 : $4.74
500 : $4.49

496

0888250.U-2M8

Littelfuse Inc

High Performance 120V MEGA Fuse, 250A
RoHS : Compliant

1 : $8.97
50 : $7.67
100 : $7.3
200 : $6.89
500 : $6.63

465