| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
886G-S08-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Coilcraft Direct | AS8886- | Coilcraft Inc | DSL transformer, CO driver transformer, SMT, not RoHS RoHS : Not Compliant | 0 | ||
| AS8886-B | Coilcraft Inc | DSL transformer, CO driver transformer, SMT, not RoHS RoHS : Not Compliant | 0 | |||
| YA8864-BLD | Coilcraft Inc | Flyback Transformer, for TI LM5180-Q1, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 13886 | WELL GROUP PRODUCTS | AVAILABLE EU | 162 | ||
| 148867502GREV01 | VOLEX | AVAILABLE EU | 34 | |||
| 57886431 | TE Connectivity | AVAILABLE EU | 1,570 | |||
| 955406886 | AVAILABLE EU | 488 | ||||
| PIC16F886TISS | Microchip Technology Inc | AVAILABLE EU | 1,623 | |||
![]() ComSIT USA | 223886775471 | Philips Semiconductors | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 5% +Tol, 5% -Tol, C0G, -/+30ppm/Cel TC, 0.00047uF, Surface Mount, 0603 RoHS : Compliant | 30,000 | ||
| KSZ8863RLLI | mct | Ethernet Switch, PQFP48 RoHS : Compliant | 16,500 | |||
| 223886115827 | Philips Semiconductors | SURFACE-MOUNT CERAMIC MULTILAYER CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 30.4878% +Tol, 30.4878% -Tol, C0G, -/+30ppm/Cel TC, 0.00000082uF, Surface Mount, 0805 RoHS : Not Compliant | 8,000 | |||
MAX8868EUK33+T![]() | Maxim Integrated Products | LDO Regulator Pos 3.3V 0.15A 5-Pin SOT-23 T/R RoHS : Compliant | 2,640 | |||
MAX8863REUK+T![]() | Maxim Integrated Products | LDO Regulator Pos 1.225V to 6.5V2.8V 0.12A 5-Pin SOT-23 T/R RoHS : Compliant | 1,875 | |||
| SAFXC886C8FFI5VAC | Infineon Technologies AG | 8-BIT SINGLE-CHIP MICROCONTROLLER Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP48 RoHS : Compliant | 1,800 | |||
| MAX8868EUK36+ | Maxim Integrated Products | LDO Regulator Pos 3.6V 0.15A 5-Pin SOT-23 RoHS : Compliant | 1,615 | |||
| PIC16F886ISS | mct | RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 20MHz, CMOS, PDSO28 RoHS : Compliant | 1,575 | |||
| KSZ8864RMNUBTR | Microchip Technology Inc | INTEGRATED 4-PORT 10/100 MANAGED SWITCH WITH TWO MACs MII OR RMII INTERFACES Ethernet Switch RoHS : Compliant | 1,000 | |||
LP8860HQVFPRQ1![]() | Texas Instruments | LOW-EMI, HIGH-PERFORMANCE 4-CHANNEL LED DRIVER FOR WITH FOUR 150-MILLI AMP CHANNEL LED Driver, 8-Segment, PQFP32 RoHS : Compliant | 890 | |||
| 955406886 | Molex | MODULAR JACK, RIGHT-ANGLE, SURFACE MOUNT, 8/8, INT. SHIELDED, LOW PROFILE, REEL Telecom and Datacom Connector RoHS : Compliant | 300 | |||
| MAX8869EUE+ | Maxim Integrated Products | Electronic Component RoHS : Compliant | 150 | |||
MAX8869EUE33+![]() | Maxim Integrated Products | LDO Regulator Pos 0.8V to 5V3.3V 1A 16-Pin TSSOP EP Tube RoHS : Compliant | 125 | |||
| MAX8867EUK33+ | Maxim Integrated Products | LDO Regulator Pos 3.3V 0.15A 5-Pin SOT-23 T/R RoHS : Compliant | 32 | |||
| PIC16F886ISO | mct | 28-PIN FLASH-BASED, 8-BIT CMOS MICROCONTROLLER RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 20MHz, CMOS, PDSO28 RoHS : Compliant | 9 | |||
![]() Interstate Connecting Components | 886 | Keystone Electronics Corp | CLEAR HOLE SPACER NYLON |
| 947 | |
| 8-2388688-6 | TE Connectivity | SUPERSEAL 34P HDR VER COD 2 W/ RoHS : Compliant |
| 0 | ||
| 1-1625886-7 | TE Connectivity | 1W SM M/OX 5% 470K RoHS : Compliant |
| 0 | ||
| 1-2823886-0 | TE Connectivity | 10P,2MM,SHRD HDR,DRVT,2.8,0.76 RoHS : Compliant | 0 | |||
| 1658862-1 | TE Connectivity | SFP 2X1 LIGHT PIPE ASSY RoHS : Compliant |
| 0 | ||
| 10142886-030A2EHLF | Amphenol FCi |
| 0 | |||
| 058-8623-062 | ITT Interconnect Solutions | 058-8623-062 | 0 | |||
| 348-8696-000 | ITT Interconnect Solutions | 348-8696-000 | 0 | |||
| 2-178288-6 | TE Connectivity | DYNAMIC 3100 REC HSG 6P BLACK RoHS : Compliant |
| 0 | ||
| 20008869-00 | TE Connectivity | DISC-+/-0.1C FROM 0C TO 70C |
| 0 | ||
| 248-8612-100 | ITT Interconnect Solutions | 248-8612-100 | 0 | |||
| 248-8635-240 | ITT Interconnect Solutions | 248-8635-240 | 0 | |||
| 248-8640-000 | ITT Interconnect Solutions | 248-8640-000 | 0 | |||
| 2488659-1 | TE Connectivity | CONN G SNA 38999 S3 SHELL 19 1 RoHS : Compliant | 0 | |||
| 1888653-4 | TE Connectivity | 2X1 OFFSET ST/JK WITH LEDS RoHS : Compliant |
| 0 | ||
![]() PUI | 12.88607 | 267,840 | ||||
| 12.88652 | 56,960 | |||||
| 12.88646 | 22,382 | |||||
| 12.88635 | 9,864 | |||||
| 12.88689 | 9,864 | |||||
| 12.88651 | 9,016 | |||||
| 12.88643 | 7,264 | |||||
| 12.88656 | 3,010 | |||||
| 12.88680 | 2,718 | |||||
| 12.88698 | 500 | |||||
| 12.88606 | 260 | |||||
| 12.88653 | 192 | |||||
| 12.88655 | 60 | |||||
| 12.88691 | 22 | |||||
| 12.88654 | 8 | |||||
![]() Avnet Silica | AL8860MP-13 | Diodes Incorporated | (Alt: AL8860MP-13) RoHS : Compliant | 10,000 | ||
| AL8862FF-7 | Diodes Incorporated | LED Driver DC DC 1 MHz 5 V to 60 V 1 A 1 Output 40 C to 105 C (Alt: AL8862FF-7) RoHS : Compliant | 6,000 | |||
| MP8865GQ-Z | Monolithic Power Systems | (Alt: MP8865GQ-Z) RoHS : Compliant | 5,000 | |||
KSZ8864CNXC![]() | Microchip Technology Inc | Managed Ethernet Switch 3135 V to 3465 V 64 Pins VQFNEP (Alt: KSZ8864CNXC) RoHS : Compliant | 260 | |||
PIC16F886-I/SP![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 5V 28Pin SPDIP Tube (Alt: PIC16F886-I/SP) RoHS : Compliant | 135 | |||
PIC16F886-I/SO![]() | Microchip Technology Inc | 8 Bit MCU Flash PIC16 Family PIC16F88x Series Microcontrollers PIC16 20 MHz 14 KB 28 Pins (Alt: PIC16F886-I/SO) RoHS : Compliant | 54 | |||
| AL8866QEV2 | Diodes Incorporated | EVALUATION BOARD FOR THE AL8866 BuckBoost 1ALED Driver (Alt: AL8866Q-EV2) RoHS : Compliant | 0 | |||
| RF6886TR13 | Qorvo | (Alt: RF6886TR13) RoHS : Compliant | 0 | |||
| AL8861Y-13 | Diodes Incorporated | LED MV Int Switch SOT895 TR 25K (Alt: AL8861Y-13) RoHS : Compliant | 0 | |||
| KSZ8863RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 48Pin LQFP Tray (Alt: KSZ8863RLLI) RoHS : Compliant | 0 | |||
KSZ8864CNXI![]() | Microchip Technology Inc | Ethernet Switch 4Port 10Mbps100Mbps 64Pin VQFN Tray (Alt: KSZ8864CNXI) RoHS : Compliant | 0 | |||
| KSZ8863FLL-TR | Microchip Technology Inc | (Alt: KSZ8863FLL-TR) RoHS : Compliant | 0 | |||
5962-8868902QA![]() | Teledyne HiRel | COMMUNICATIONS CONTROLLER SERIAL 80 M (Alt: 5962-8868902QA) RoHS : Compliant | 0 | |||
| KSZ8863MLL-EVAL | Microchip Technology Inc | KSZ8863MLL 3Port 100Mbps Ethernet Switch Evaluation Board (Alt: KSZ8863MLL EVAL) RoHS : Compliant | 0 | |||
PIC16F886T-I/ML![]() | Microchip Technology Inc | 8 Bit MCU PIC16 Family PIC16F88x Series Microcontrollers PIC16 20 MHz 14 KB 28 Pins QFN (Alt: PIC16F886T-I/ML) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 2238-867-15109 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 18,000 | |
| 2238-863-15279 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 3,800 | ||
| 2238-867-15109 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 3,349 | ||
| 2238-867-15479 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 3,330 | ||
MAX8863TEUK-T![]() | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,988 | ||
| 886 | Keystone Electronics Corp | IN STOCK SHIP TODAY |
| 1,950 | ||
| 8868000G91P-055 | Delta Electronics Inc | IN STOCK SHIP TODAY | 923 | |||
| 13627886 | Aptiv PLC | IN STOCK SHIP TODAY |
| 500 | ||
| 2238-861-15908 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 400 | ||
| 788667-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 327 | ||
SI7886ADP-T1![]() | Vishay Siliconix | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 40 | ||
| PE-68865 | Pulse Electronics Corporation | IN STOCK SHIP TODAY |
| 30 | ||
| MH88631 | Mitel Networks Corporation | IN STOCK SHIP TODAY | 20 | |||
| MV8860 | Plessey Semiconductors Ltd | IN STOCK SHIP TODAY | 12 | |||
| SG-615P-18.8696MC | Seiko Epson Corporation | IN STOCK SHIP TODAY |
| 2 | ||
![]() EBV Elektronik | PIC16F886T-I/ML![]() | Microchip Technology Inc | 8 Bit MCU PIC16 Family PIC16F88x Series Microcontrollers PIC16 20 MHz 14 KB 28 Pins QFN (Alt: PIC16F886T-I/ML) RoHS : Compliant | 4,800 | ||
| KSZ8863RLLI-TR | Microchip Technology Inc | Ethernet Controller Ethernet Switch IEEE 8023 IEEE 8023u 3135 V 3465 V LQFP 48 Pins (Alt: KSZ8863RLLI-TR) RoHS : Compliant | 3,000 | |||
| KSZ8863RLL | Microchip Technology Inc | Ethernet Switch 3Port 10Mbps100Mbps 48Pin LQFP Tray (Alt: KSZ8863RLL) RoHS : Compliant | 2,750 | |||
PIC16F886-I/SO![]() | Microchip Technology Inc | 8 Bit MCU Flash PIC16 Family PIC16F88x Series Microcontrollers PIC16 20 MHz 14 KB 28 Pins (Alt: PIC16F886-I/SO) RoHS : Compliant | 216 | |||
PIC16F886-I/ML![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 5V 28Pin QFN EP Tube (Alt: PIC16F886-I/ML) RoHS : Compliant | 183 | |||
| 2N5886 | Microchip Technology Inc | Transistor GP BJT NPN 80V 25A 2Pin TO3 (Alt: 2N5886) RoHS : Compliant | 0 | |||
| KSZ8863RLLI | Microchip Technology Inc | Ethernet Switch 3Port 100Mbps 48Pin LQFP Tray (Alt: KSZ8863RLLI) RoHS : Compliant | 0 | |||
KSZ8864CNXI![]() | Microchip Technology Inc | Ethernet Switch 4Port 10Mbps100Mbps 64Pin VQFN Tray (Alt: KSZ8864CNXI) RoHS : Compliant | 0 | |||
| KSZ8863FLL-TR | Microchip Technology Inc | (Alt: KSZ8863FLL-TR) RoHS : Compliant | 0 | |||
| KSZ8863FLLI-TR | Microchip Technology Inc | (Alt: KSZ8863FLLI-TR) RoHS : Compliant | 0 | |||
| TC358860XBG(ES) | Toshiba America Electronic Components | CMOS Digital Integrated Circuit 65Pin FBGA (Alt: TC358860XBG(ES)) RoHS : Compliant | 0 | |||
| BCM88682CA1KFSBG | Broadcom Limited | BCM88682CA1KFSBG (Alt: BCM88682CA1KFSBG) RoHS : Compliant | 0 | |||
| TC358860XBG(GOH) | Toshiba America Electronic Components | Embedded DP to Dual DSI bridge (Alt: TC358860XBG(GOH)) RoHS : Compliant | 0 | |||
| ATMEGA64L-8AU SL886 | Microchip Technology Inc | MCU 8Bit ATmega AVR RISC 64KB Flash 33V5V 64Pin TQFP Tray (Alt: ATMEGA64L-8AU SL886) RoHS : Compliant | 0 | |||
XC886CLM8FFA5VACLXUMA1![]() | Infineon Technologies AG | MCU 8Bit XC800 8051 CISC 32KB Flash 25V5V 48Pin TQFP TR (Alt: SP000829526) RoHS : Compliant | 0 | |||
![]() Flip Electronics | LV8862JA-AH | onsemi | Stock, Ship Today RoHS : Compliant |
| 52,000 | |
| FDP8860 | onsemi | Stock, Ship Today RoHS : Compliant |
| 13,400 | ||
| FDC8886 | onsemi | Stock, Ship Today RoHS : Compliant | 9,000 | |||
| MC33886PVW | NXP Semiconductors | Stock RoHS : Compliant | 7,560 | |||
| NL88655HG12300B1E | Broadcom Limited | Stock, Ship Today |
| 54 | ||
| BCM88664A0KFSBLG | Broadcom Limited | Stock, Ship Today |
| 37 | ||
5962-8861011UA![]() | Integrated Device Technology Inc | Stock, Ship Today RoHS : Not Compliant |
| 36 | ||
| BCM88651B1KFSBLG | Broadcom Limited | Stock, Ship Today |
| 36 | ||
| BCM88672CB0KFSBG | Broadcom Limited | Stock, Ship Today |
| 26 | ||
![]() Neutron USA | 8869420000![]() | Weidmüller Interface GmbH & Co. KG | Relay Sockets & Hardware SCM-I 4CO RoHS : Compliant |
| 40 | |
| 21406000886050 | HARTING Technology Group | Sensor Cables / Actuator Cables M12 X-COD 8-POL ST/- M/- PUR P RoHS : Compliant |
| 20 | ||
| 7940098862 | Weidmüller Interface GmbH & Co. KG | Ribbon Cables / IDC Cables OVP 0.25A SPARE FUSES,5/PACK |
| 16 | ||
| 1788660000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC 10A SDLU 2M20G RoHS : Compliant |
| 10 | ||
| 8869690000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks RIM-I 2 110/230VDC RoHS : Compliant |
| 6 | ||
| QS18VP6DQ8-86796 | Banner Engineering Corp | PE Sensor, Diffuse, R: 450 mm, 10-30 Vdc, L/D PNP, QDM12, 86796 |
| 5 | ||
| QS18VP6LPQ8-86386 | Banner Engineering Corp | PE Sensor, Polar Retro, R: 3.5m, 10-30Vdc, L/D PNP, QDM12, 86386 |
| 1 | ||
| 8000-88659-4041000 | Murrelektronik GmbH | Sensor Cables / Actuator Cables CAP FOR D-BOX M12 8-WAY 5-POLE, Pot.-sep. 10m PUR/PVC, 16x0,34+5X0.75 RoHS : Compliant |
| 1 | ||
| 8869520000 | Weidmüller Interface GmbH & Co. KG | Relay Sockets & Hardware SRC-I CLIP LP |
| 0 | ||
| 1714886 | Phoenix Contact | Board to Board & Mezzanine Connectors FP 1,27/ 50-FV 9,05 RoHS : Compliant |
| 0 | ||
| AXG88698995/1 | Axiom Manufacturing | 8GB DDR4 ECC UDIMM 288PIN 1.2V TAA |
| 0 | ||
| FN3288-63-53-C17-R65 | Schaffner | Power Line Filters RoHS : Compliant |
| 0 | ||
| 2708863 | Phoenix Contact | Repeater, 4-Way, 24VDC, Electrical Isolation/Range Increase for PROFIBUS, 12Mbps RoHS : Compliant |
| 0 | ||
| AXG97886 | Axiom Manufacturing | AXIOM 100FT CAT6A BENDNFLEX CAB (BLACK) |
| 0 | ||
| 88865265 | Crouzet | Relay, E-Mech, Timing, Off Delay, DPDT, Cur-Rtg 10A, Screw, Chronos 2 Series |
| 0 | ||
![]() Pasternack Enterprises US | PE3C9888-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. N Male to Straight Cut Lead Cable 6 Inch Length Using Tinned RG402 Coax., Radio frequency assembly N male to straight cut lead cable 6 inch length using tinned RG402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to straight cut lead cable 6 inch length using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3C9888-6 can also be known as a type N plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. The semi-rigid RF cable has a between series connection. Type N plug to straight cut lead sexless cable assembly PE3C9888-6 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance. One connector features the solder/solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9888-6 can also be used in the other direction and will be a straight cut lead sexless to type N male cable assembly if the opposite connectivity is required. Type N plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements. |
| 160 | |
| PE3W17088-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMA Male Cable 6 Inch Length Using PE-SR402FLJ Coax., Pasternack’s PE3W17088-6 SMA male to SMA male RF cable assembly using PE-SR402FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W17088-6 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17088-6 RF cable has an FEP jacket of 0.161-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 150 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W17088-6 SMA plug to SMA plug cable assembly is built with PE-SR402FLJ, which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 23 | ||
| PE3C2886LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-SR402FLJ Coax, LF Solder. PE3C2886LF is a SMA male to SMA male cable using PE-SR402FLJ coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C2886LF SMA male to SMA male cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE3W04886 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Plug to FAKRA Plug Cable Using LMR-100 Coax. PE3W04886 is a FAKRA plug to FAKRA plug cable using LMR-100A coax. This Pasternack FAKRA plug to FAKRA plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our plug FAKRA to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04886 FAKRA plug to FAKRA plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W08864 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Male Cable Using LMR-195 Coax. PE3W08864 is a SMA female bulkhead to SMA male cable using LMR-195 coax. This Pasternack SMA female bulkhead to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08864 SMA female bulkhead to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W08863 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Cable Using RG316 Coax. PE3W08863 is a SMA female to SMA male cable using RG316 coax. This Pasternack SMA female to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08863 SMA female to SMA male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W18886LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using RG316 Coax, LF Solder. PE3W18886LF is a SMA male to SMA male right angle cable using RG316 coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18886LF SMA male to SMA male right angle cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C3886 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50, Connector Series 2: Trimmed Lead, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50. SMB Jack Bulkhead to Trimmed Lead Cable Using RG178 Coax. PE3C3886 is a SMB jack bulkhead to Trimmed Lead sexless cable using RG178 coax. This Pasternack SMB jack bulkhead to Trimmed Lead sexless cable assembly uses a 50 Ohm SMB for connector 1 and a Trimmed Lead for connector 2. Our jack SMB bulkhead to sexless Trimmed Lead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3886 SMB jack bulkhead to Trimmed Lead sexless cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W09886LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Male Cable Using LMR-200 Coax with HeatShrink, LF Solder. PE3W09886LF/HS is a TNC male right angle to SMA male cable using LMR-200 coax. This Pasternack TNC male right angle to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09886LF/HS TNC male right angle to SMA male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W09288-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to TNC Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to TNC female bulkhead low loss cable 60 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female bulkhead low loss cable 60 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC bulkhead cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W09288-60 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09288-60 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to bulkhead TNC female cable has a maximum VSWR of 1.4:1. SMA plug to TNC jack cable assembly PE3W09288-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W09288-60 can also be used in the other direction and will be a TNC female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C9288-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.4mm Male to BNC Male Cable 6 Inch Length Using PE-P086 Coax., Radio frequency assembly 2.4mm male to BNC male cable 6 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to BNC male cable 6 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.4mm cable connection on one end and a BNC cable connection on the other. Our 2.4mm to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C9288-6 can also be known as a 2.4mm plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9288-6 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our 2.4mm male to BNC male cable has a maximum VSWR of 1.4:1. 2.4mm plug to BNC plug cable assembly PE3C9288-6 is built with PE-P086 which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method, while the other has the solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9288-6 can also be used in the other direction and will be a BNC male to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to BNC cable assembly for quick shipment worldwide. Variations of 2.4mm and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W18869 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMA Male to Plug Cable Using LMR-100A-UF Coax. PE3W18869 is a SMA male to FAKRA plug cable using LMR-100A-UF coax. This Pasternack SMA male to FAKRA plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. Our male SMA to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18869 SMA male to FAKRA plug cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18869/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMA Male to Plug Cable Using LMR-100A-UF Coax with HeatShrink. PE3W18869/HS is a SMA male to FAKRA plug cable using LMR-100A-UF coax. This Pasternack SMA male to FAKRA plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. Our male SMA to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18869/HS SMA male to FAKRA plug cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W19886 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using LMR-400-UF Coax. PE3W19886 is a SMA male to SMA male right angle cable using LMR-400-UF coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19886 SMA male to SMA male right angle cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18867-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male to 4.3-10 Male Low PIM Cable 48 Inch Length Using TCOM-600 Coax with Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male low PIM cable 48 inch length using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W18867-48 can also be known as a low PIM 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18867-48 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3W18867-48 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
![]() Teledyne HiRel | 5962-88636043A | Teledyne HiRel | PROM, 1K X 8, REGISTERED, 30 NS RoHS : Not Compliant | 0 | ||
| 5962-8866208NA | Teledyne HiRel | STATIC RAM, 32K X 8, 15 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8867002KA | Teledyne HiRel | PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 30 NS RoHS : Not Compliant | 0 | |||
5962-8863702LA![]() | Teledyne HiRel | PROG. LOGIC DEVICE, 30 NS PROP. DELAY RoHS : Not Compliant | 0 | |||
| 5962-8865602KA | Teledyne HiRel | REGISTER, 9-BIT NONINVERTING RoHS : Not Compliant | 0 | |||
| 5962-8866905XA | Teledyne HiRel | FIFO MEMORY, 2K X 9, 30 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8868902YA![]() | Teledyne HiRel | COMMUNICATIONS CONTROLLER, SERIAL, 8.0 MHZ RoHS : Not Compliant | 0 | |||
| 5962-8866201NA | Teledyne HiRel | STATIC RAM, 32K X 8, 100 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8866204UA![]() | Teledyne HiRel | STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 45 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8867807XA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 16-INPUT 8-OUTPUT AND-OR INVERTED RoHS : Not Compliant | 0 | |||
5962-8868902QA![]() | Teledyne HiRel | COMMUNICATIONS CONTROLLER, SERIAL, 8.0 MHZ RoHS : Not Compliant | 0 | |||
5962-88637023A![]() | Teledyne HiRel | PROG. LOGIC DEVICE, 30 NS PROP. DELAY RoHS : Not Compliant | 0 | |||
5962-88639012A![]() | Teledyne HiRel | LATCH, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-8866207XA | Teledyne HiRel | STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 20 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8865701EA![]() | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
![]() Vyrian | XC886CLM8FFAACAXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP48 RoHS : Compliant | 12,821 | ||
XC886C6FFA5VACFXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP48 RoHS : Compliant | 11,355 | |||
| XC886C6FFA5VACKXUMA1 | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP48 RoHS : Compliant | 10,480 | |||
XC8866FFI5VACFXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP48 RoHS : Compliant | 9,249 | |||
XC8868FFI5VACFXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP48 RoHS : Compliant | 8,476 | |||
XC8866FFA5VACKXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 8051 CPU, 24MHz, CMOS, PQFP48 RoHS : Compliant | 8,236 | |||
| XC886LM6FFA5VACKXUMA1 | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 8051 CPU, 24MHz, CMOS, PQFP48 RoHS : Compliant | 8,006 | |||
XC886CLM8FFA5VACLXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 20MHz, CMOS, PQFP48 RoHS : Compliant | 7,659 | |||
XC886C8FFI5VACFXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP48 RoHS : Compliant | 6,473 | |||
XC886CM8RFA5VAAKZZZA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, MROM, 24MHz, CMOS, PQFP48 | 6,331 | |||
XC886CM8FFA5VACAXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP48 | 5,913 | |||
XC886C6FFI3V3ACFXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP48 RoHS : Compliant | 5,850 | |||
| XC886CLM8FFA5VACKXUMA1 | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 8051 CPU, 24MHz, CMOS, PQFP48 RoHS : Compliant | 5,003 | |||
XC886C6FFI5VACFXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, FLASH, 24MHz, CMOS, PQFP48 RoHS : Compliant | 4,110 | |||
XC886CM8FFA5VACLXUMA1![]() | Infineon Technologies AG | Microcontroller, 8-Bit, 24MHz | 4,042 | |||
![]() Waytek, Inc. | 140886-91 | General Cable Technologies Corporation | 18GA TXL Violet Cross-Link Automotive Wire XLPE -51C to 125C |
| 120,750 | |
| 131886-91AW | General Cable Technologies Corporation | 16GA GXL Blue Cross-Link Automotive Wire XLPE -51C to 125C |
| 92,500 | ||
| 7100163886 | 3M | 12-10GA Male Disconnect Yellow Nylon .250 X .032 Extra Sleeve FULLY INSULATED YELLOW NYLON |
| 6,913 | ||
| 0888650.U-2M8 | Littelfuse Inc | High Performance 120V MEGA Fuse, 650A RoHS : Compliant |
| 489 | ||
![]() Win Source Electronics | MAX1886EZK![]() | Maxim Integrated Products | HIGH-CURRENT VCOM DRIVE BUFFER RoHS : Not Compliant |
| 39,711 | |
| AL8862SP-13 | Diodes Incorporated | IC LED DRIVER RGLTR PWM 1A 8SO / LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 1A 8-SO-EP RoHS : Compliant |
| 30,500 | ||
| KSZ8863RLLI-TR | Microchip Technology Inc | IC ETHERNET SWITCH 3PORT 48-LQFP RoHS : Compliant |
| 18,000 | ||
ACT8865QI305-T![]() | Active-Semi | IC PMU CONV/LDO REG 32TQFN RoHS : Compliant |
| 16,500 | ||
LP8866QDCPRQ1![]() | Texas Instruments | AUTOMOTIVE DISPLAY LED-BACKLIGHT RoHS : Compliant |
| 9,020 | ||
ADS8866IDRCR![]() | Texas Instruments | 16-Bit, 100-kSPS, Serial Interface, microPower, Miniature Single-Ended Input, SAR Analog-to-Digital Converter RoHS : Compliant |
| 8,320 | ||
| 0788641001 | Molex | CONN SPRING BATTERY 6POS SMD RoHS : Compliant |
| 7,210 | ||
LP8867QPWPRQ1![]() | Texas Instruments | 4-CHANNEL LED DRIVER RoHS : Compliant |
| 6,000 | ||
ADS8866IDGSR![]() | Texas Instruments | 16-Bit, 100-kSPS, Serial Interface, microPower, Miniature Single-Ended Input, SAR Analog-to-Digital Converter RoHS : Compliant |
| 5,930 | ||
ADS8865IDGSR![]() | Texas Instruments | 16-Bit, 400-kSPS, Serial Interface, microPower, Miniature, True-Differential Input, SAR Analog-to-Digital Converter RoHS : Compliant |
| 4,258 | ||
LM3886T/NOPB![]() | Texas Instruments | Audio Amp Speaker 1-CH Mono 68W Class-AB 11-Pin(11+Tab) TO-220 Tube / IC AMP AUDIO PWR 68W AB TO220-11 RoHS : Compliant |
| 1,020 | ||
| RF6886SR | Qorvo | Linear Power Amplifier 100MHz to 1000MHz 3.6V 16-Pin QFN RoHS : Compliant |
| 1,000 | ||
| MAX4886ETO+T | Maxim Integrated Products | IC QUAD HDMI/DVI 2:1 SW 42TQFN RoHS : Compliant |
| 500 | ||
| BCM88660A0KFSBG | Broadcom Limited | IC TELECOM INTERFACE TRAFFIC MGR / Telecom IC |
| 270 | ||
| BCM88690CB1KFSBG | Broadcom Limited | 10 Tb/S Scalable Switching Device RoHS : Compliant |
| 70 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |