866PVC Price, nhà phân phối, Stock

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to SMA Male Cable 6 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMA male to SMA male cable 6 inch length using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 6 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34186-6, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34186-6 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 6 inch length using PE-SR047FL coax.

1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49

235

PE34186-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Male Cable 60 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMA male to SMA male cable 60 inch length using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 60 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34186-60, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34186-60 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 60 inch length using PE-SR047FL coax.

1 : $160.99
25 : $152.94
50 : $144.89

141

PE3C1866-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: RP, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: RP, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity SMA Plug to Reverse Polarity SMA Jack Bulkhead Low Loss Cable 36 Inch Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to reverse polarity SMA jack bulkhead low loss cable 36 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to reverse polarity SMA jack bulkhead low loss cable 36 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with rp SMA cable connection on one end and rp SMA bulkhead cable connection on the other. Our low loss rp SMA to rp SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE3C1866-36 can also be known as a low loss rp SMA male to rp SMA female cable assembly and will be shipped same-day as it is purchased. Rp SMA male to rp SMA female cable assembly PE3C1866-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible rp SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this rp SMA plug to rp SMA jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1866-36 can also be used in the other direction and will be rp SMA jack bulkhead to rp SMA plug cable assembly if the opposite connectivity is required. Low loss SMA rp male to SMA rp female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to reverse polarity SMA jack bulkhead low loss cable 36 inch length using LMR-195 coax.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

114

PE3W17866-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to NEX10 Female Low PIM Cable 24 Inch Length Using SPO-250 Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable 24 inch length using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female low PIM cable 24 inch length using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17866-24 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17866-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17866-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17866-24 can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61

PE3C6486-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. 2.92mm Male to 2.92mm Male Low Loss Cable 60 Inch Length Using 047 Coax., Radio frequency assembly 2.92mm male to 2.92mm male low loss cable 60 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 2.92mm male to 2.92mm male low loss cable 60 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our low loss 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE3C6486-60, can also be known as a low loss 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C6486-60 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 45 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male low loss cable 60 inch length using 047 coax.

1 : $466.99
25 : $443.64
50 : $420.29
100 : $401.61

PE3C9866

Pasternack Enterprises

PE3W03866

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B400, RF Cable Type: PE-B400, RF Cable Impedance: 50 Ohm. N Male to SMA Female Cable Using PE-B400 Coax. PE3W03866 is a N male to SMA female cable using PE-B400 coax. This Pasternack N male to SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03866 N male to SMA female cable assembly is constructed with PE-B400 coax.

PE3W18662

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MMCX Jack to MCX Plug Cable Using RG188 Coax. PE3W18662 is a MMCX jack to MCX plug cable using RG188 coax. This Pasternack MMCX jack to MCX plug cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MCX for connector 2. Our jack MMCX to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18662 MMCX jack to MCX plug cable assembly is constructed with RG188 coax.

PE3W18668

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. BNC Female 4 Hole Flange to MCX Plug Cable Using RG188-DS Coax. PE3W18668 is a BNC female 4 hole flange to MCX plug cable using RG188-DS coax. This Pasternack BNC female 4 hole flange to MCX plug cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm MCX for connector 2. Our female BNC 4 hole flange to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18668 BNC female 4 hole flange to MCX plug cable assembly is constructed with RG188-DS coax.

PE3C8286-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 60 inches. 4.1/9.5 Mini DIN Male to 7/16 DIN Female 4 Hole Flange Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 7/16 DIN female 4 hole flange low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 7/16 DIN female 4 hole flange low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 7/16 DIN 4 hole flange cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 7/16 DIN cable is a male to female coax assembly, PE3C8286-60, can also be known as a low PIM 4.1/9.5 mini DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 7/16 DIN jack cable assembly PE3C8286-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 7/16 DIN female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8286-60 can also be used in the other direction and will be 7/16 DIN female 4 hole flange to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 7/16 DIN female 4 hole flange low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

PE3W18664

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SSMB Jack Bulkhead Cable Using RG316-DS Coax. PE3W18664 is a SMA female bulkhead to SSMB jack bulkhead cable using RG316-DS coax. This Pasternack SMA female bulkhead to SSMB jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMB for connector 2. Our female SMA bulkhead to jack SSMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18664 SMA female bulkhead to SSMB jack bulkhead cable assembly is constructed with RG316-DS coax.

PE34866-12

Pasternack Enterprises

Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. FME Jack to BNC Male Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly FME jack to BNC male cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to BNC male cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a jack gender on end 1 and male on end 2. This FME to BNC cable is a jack to male coax assembly, PE34866-12, can also be known as a FME female to BNC plug cable assembly and will be shipped same-day as it is purchased. FME female to BNC plug cable assembly PE34866-12 is built with RG174 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34866-12 can also be used in the other direction and will be BNC male to FME jack cable assembly if the opposite connectivity is required. FME female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to BNC male cable 12 inch length using RG174 coax.

1 : $51.19
25 : $48.63
50 : $46.07
100 : $44.02

PE3C8669

Pasternack Enterprises

PE3W08669/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMA Male Cable Using RG405 Coax with HeatShrink. PE3W08669/HS is a SMP female right angle to SMA male cable using RG405 coax. This Pasternack SMP female right angle to SMA male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMA for connector 2. SMP right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08669/HS SMP female right angle to SMA male cable assembly is constructed with RG405 coax.

PE3W09866LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. 4.3-10 Male to 7/16 DIN Male Cable Using LMR-400-UF Coax, LF Solder. PE3W09866LF is a 4.3-10 male to 7/16 DIN male cable using LMR-400-UF coax. This Pasternack 4.3-10 male to 7/16 DIN male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 4.3-10 to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09866LF 4.3-10 male to 7/16 DIN male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

Teledyne HiRel

5962-8866202XA

Teledyne HiRel

STATIC RAM, 32K X 8, 70 NS ACCESS TIME
RoHS : Not Compliant

5962-8866904YA

Teledyne HiRel

FIFO MEMORY, 2K X 9, 40 NS ACCESS TIME
RoHS : Not Compliant

5962-8866209YA

Teledyne HiRel

STATIC RAM, 32K X 8, 12 NS ACCESS TIME
RoHS : Not Compliant

5962-8866903XA

Teledyne HiRel

FIFO MEMORY, 2K X 9, 50 NS ACCESS TIME
RoHS : Not Compliant

5962-8866206YA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-8866208MA

Teledyne HiRel

STATIC RAM, 32K X 8, 15 NS ACCESS TIME
RoHS : Not Compliant

5962-8866203YA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8866205MA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-8866208TA

Teledyne HiRel

STATIC RAM, 32K X 8, 15 NS ACCESS TIME
RoHS : Not Compliant

5962-8866905ZA

Teledyne HiRel

FIFO MEMORY, 2K X 9, 30 NS ACCESS TIME
RoHS : Not Compliant

5962-8866203NA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8866206UA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-8866204YA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 45 NS ACCESS TIME
RoHS : Not Compliant

5962-8866206MA

Teledyne HiRel

STATIC RAM, 32K X 8, WITH OUTPUT ENABLE, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-8866209TA

Teledyne HiRel

STATIC RAM, 32K X 8, 12 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

MELFC0102-RZ-8661BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�15PPM;8.66K;�0.1%
RoHS : Compliant

MELFC0102-YC-8663FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�50PPM;866K;�1%
RoHS : Compliant

MELFC0204-ZK-8663FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�100PPM;866K;�1%
RoHS : Compliant

MELFC0207-VC-8660FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;866R;�1%
RoHS : Compliant

MELFC0207-VE-8660BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;866R;�0.1%
RoHS : Compliant

MELFC0207-VZ-8660CT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�15PPM;866R;�0.25%
RoHS : Compliant

MELFC0207-XZ-8661BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�15PPM;8.66K;�0.1%
RoHS : Compliant

MELFM0204-TE-8661FT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�25PPM;8.66K;�1%
RoHS : Not Compliant

MELFM0204-ZE-8661DT

VENKEL LTD

MELF Molded Thin Film CR;0204;2/5W;�25PPM;8.66K;�0.5%
RoHS : Not Compliant

MELFM0207-VE-8662FT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�25PPM;86.6K;�1%
RoHS : Not Compliant

UPTF2010-2W-N-8663BT

VENKEL LTD

Ultra Precision Thin Film CR;2010;1/2W;�10PPM;866K ;�0.1%
RoHS : Compliant

UPTF2512-2W-P-8662BT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�5PPM;86.6K;�0.1%
RoHS : Compliant

PWCR0805-VK-8663DT

VENKEL LTD

Pulse Withstanding CR;0805;1/2W;�100PPM;866K;�0.5%
RoHS : Compliant

PWCR1206-UK-8660FT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;866R;�1%
RoHS : Compliant

PWCR1210-XK-8662DT

VENKEL LTD

Pulse Withstanding CR;1210;1W;�100PPM;86.6K;�0.5%
RoHS : Compliant

Vyrian

2866598

Phoenix Contact

Power Supply Modules/Adaptors
RoHS : Compliant

12,752

MAX6866UK16D3S+T

Analog Devices Inc

Power Supply Management Circuit, Fixed, 1 Channel, BICMOS, PDSO5
RoHS : Compliant

10,733

1654866

Phoenix Contact

Fiber Optic SC Connector, 200/230um, Multi Mode, Duplex, Plug
RoHS : Compliant

10,552

BCM88664A0KFSBG

Broadcom Limited

9,866

SN54AS866FK

Texas Instruments

Magnitude Comparator, AS Series, 8-Bit, True Output, TTL, CQCC28
RoHS : Not Compliant

9,632

1986644

Phoenix Contact

Terminal Block Accessory, Jumper, Copper Alloy
RoHS : Compliant

9,516

1788660

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

7,679

KHX1866C9D3T1K2/8GX

Kingston Technology Company

6,901

SN74AS866AFN

Texas Instruments

Magnitude Comparator, AS Series, 8-Bit, True Output, TTL, PQCC28
RoHS : Not Compliant

6,723

NX8663JB-BC-AZ

Renesas Electronics Corporation

Laser Diode, 1650nm
RoHS : Compliant

6,169

BCM88664LA0KFSBG

Broadcom Limited

6,101

1735866

Phoenix Contact

Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

5,954

MAX6866UK18D5L

Analog Devices Inc

Power Supply Management Circuit, Fixed, 1 Channel, +1.8V, BICMOS, PDSO5
RoHS : Not Compliant

5,879

2866679

Phoenix Contact

Power Supply Modules/Adaptors
RoHS : Compliant

4,097

TBP28SA86-60N3

Texas Instruments

OTP ROM, 1KX8, 60ns, TTL, PDIP24
RoHS : Not Compliant

3,376

Waytek, Inc.

131866-91AW

General Cable Technologies Corporation

18GA GXL Blue Cross-Link Automotive Wire XLPE -51C to 125C

500 : $0.1101
1,000 : $0.0969
3,000 : $0.0785
5,000 : $0.0704

249,824

7100163866

22-18 GA # 6 Snap Spade Nylon Terminal Extra Sleeve BRASS EXTRA SLEEVE

50 : $0.2822
200 : $0.2671
500 : $0.2482
1,000 : $0.2381

8,890

866PVC nhà phân phối

Link URL