85L-SM1-R Price, nhà phân phối, Stock

1 : $117.978
5 : $117.978
10 : $108.347
25 : $93.14
50 : $93.14
100 : $89.983
250 : $87.033
500 : $87.033
1,000 : $87.033
2,500 : $87.033
10,000 : $87.033

4

MS27408-5L

Honeywell Sensing and Control

Switches

0

MS27408-5L

Safran Electrical & Power UK

Switches

0

8500-3185-LP

SOURIAU-SUNBANK

Connector 26482

0

M39016/9-085L

TE Connectivity

Relays
RoHS : Not Compliant

0

Maritex

CRS08(TE85L,Q,M)

Toshiba Corporation

Rectifier Diodes & Bridges; CRS08(TE85L,Q,M); TOSHIBA; 50 �A; 1.5 A; 2; 30 A

6,000 : $0.078
3,000 : $0.086
500 : $0.102
150 : $0.13
50 : $0.154
5 : $0.208
1 : $0.65

5,017

RN4601(TE85LF)

Toshiba Corporation

Bipolar Transistors (BJT); RN4601(TE85LF); TOSHIBA; 300 mV; 100 mA

5,000 : $0.07
300 : $0.078
100 : $0.083
30 : $0.092
10 : $0.124
1 : $0.153

4,191

UZ1085L-33-TN3-R

Unisonic Technologies Co Ltd

LDO Regulators; UZ1085L-33-TN3-R; UTC
RoHS : Compliant

5,000 : $0.112
2,500 : $0.121
500 : $0.155
150 : $0.188
50 : $0.219
5 : $0.291
1 : $0.915

3,148

LP30-185 LEAD FREE

Cyg Wayon Circuit Protection Co Ltd

PTC resettable fuse SMD; 1.85A; 30V

1,000 : $0.088
500 : $0.091
250 : $0.096
50 : $0.109
1 : $0.216

2,724

CRS14(TE85L,Q,M)

Toshiba Corporation

Rectifying Diode; 30V; 2A; -40+150 deg.C; SMD; SOD123F

1,000 : $0.132
500 : $0.136
100 : $0.179
10 : $0.281
1 : $0.453

1,981

LP60-185 LEAD FREE

Cyg Wayon Circuit Protection Co Ltd

PTC resettable fuse SMD; 1.85A; 60V

1,000 : $0.413
250 : $0.453
50 : $0.486
1 : $0.52

965

LL01CR-CAX3585L02

LedLink Optics

Lens for LED high power; angle: oval 35 x 85 degrees ; Number of LEDs: 1; Dimensions: 20.5x20.5mm; Height: 14.1mm; material: PMMA; Fastening: pin

1 : $1.194

517

FP11085_LISA2-RS-CLIP

LEDIL

Lens for LED high power; angle: 9 to 26 degrees FWHM; Number of LEDs: 1; Dimensions: round 10mm; Height: 6.8mm; meterial: PMMA; PC; Fastening: glue; clips

5,000 : $1.441
1,000 : $1.511
500 : $1.644
100 : $1.873
10 : $2.395
1 : $3.261

25

Master Electronics

ADM6-60-08.5-L-4-0-A-TR

Samtec Inc

RoHS : Compliant

250 : $18.35
100 : $19.39
50 : $23.61
25 : $24.2
10 : $25.4
5 : $27.09
1 : $28.07

100

S1SS-05-30C-GF-10.85-L1

Samtec Inc

RoHS : Compliant

5,000 : $2.31
2,500 : $2.69
1,000 : $3.22
500 : $3.34
250 : $4.76
100 : $4.97
25 : $5.37
5 : $6.4

0

S1SS-10-28C-GF-01.85-L

Samtec Inc

RoHS : Compliant

5,000 : $2.13
2,500 : $2.55
1,000 : $2.96
500 : $3.08
250 : $4.37
100 : $4.57
50 : $4.78
5 : $5.88

0

S1SST-10-28-GF-01.85-L3

Samtec Inc

RoHS : Compliant

5,000 : $2.39
2,500 : $2.78
1,000 : $3.32
500 : $3.45
250 : $4.91
100 : $5.13
25 : $5.55
5 : $6.62

0

DW-18-19-S-D-985-LL

Samtec Inc

.100 Flex Stack Flexible Board Stacker .110 Tail
RoHS : Compliant

1,000 : $4.41
500 : $5.48
250 : $6.41
100 : $6.68
50 : $7.54
25 : $7.77
5 : $8.29

0

ADM6-60-08.5-L-4-2-TR

Samtec Inc

0.635 mm AcceleRate HD High-Density 4-Row Termi
RoHS : Compliant

250 : $21.03
100 : $22.68
50 : $29.47
25 : $31.17
10 : $33.01
5 : $33.09
1 : $37.09

0

S1SDT-03-28-GF-07.85-L1

Samtec Inc

RoHS : Compliant

2,500 : $3.38
1,000 : $3.88
500 : $4.38
250 : $4.71
100 : $4.93
50 : $6.81
25 : $6.83
5 : $8.4

0

S1SDT-07-28-GF-01.85-L1

Samtec Inc

RoHS : Compliant

1,000 : $4.83
500 : $5.45
250 : $5.62
100 : $6.12
50 : $8.09
25 : $8.47
5 : $9.34

0

S1SD-15-28-GF-09.85-L1

Samtec Inc

MICRO MATE DOUBLE ROW DI
RoHS : Compliant

250 : $12.82
100 : $13.77
50 : $18.5
25 : $19.05
10 : $19.64
5 : $20.59
1 : $22.01

0

S1SS-02-28C-GF-10.85-L1

Samtec Inc

RoHS : Compliant

5,000 : $1.49
2,500 : $1.79
1,000 : $2.07
500 : $2.26
250 : $3.12
100 : $3.35
50 : $3.36
10 : $4.13

0

S1SST-06-28-GF-10.85-L

Samtec Inc

RoHS : Compliant

5,000 : $2.14
2,500 : $2.56
1,000 : $2.97
500 : $3.1
250 : $4.4
100 : $4.6
50 : $4.81
5 : $5.92

0

MTLW-110-05-H-D-185-LL

Samtec Inc

.100 LOW PROFILE VARIAB
RoHS : Compliant

2,500 : $3.01
1,000 : $3.92
500 : $4.32
250 : $5.49
100 : $5.98
50 : $6.25
25 : $6.26
5 : $7.71

0

MRTD-02-26-L-78.5-L1

Samtec Inc

RoHS : Compliant

2,500 : $3.57
1,000 : $4.09
500 : $4.63
250 : $4.97
100 : $5.19
50 : $7.19
25 : $7.2
5 : $8.87

0

MRTD-03-22-L-88.5-L1

Samtec Inc

RoHS : Compliant

1,000 : $5.55
500 : $6.27
250 : $6.47
100 : $7.04
50 : $9.33
25 : $9.77
5 : $10.78

0

MRTD-04-20-L-58.5-L1

Samtec Inc

RoHS : Compliant

1,000 : $5.91
500 : $6.67
250 : $6.88
100 : $7.28
50 : $9.91
25 : $10.38
5 : $11.45

0

Neutron USA

BB-485LDRC9

Advantech Co Ltd

RS232 TO RS485 DB9 DINRAIL - 1 Pack - 1 x 9-pin DB-9 RS-232 Serial Female - 1 x Terminal Block RS-422/485 Serial
RoHS : Compliant

1 : $179.0

50

AT9704-085L

NKK Switches

Accessory, Socket for OLED 64x48 P/B Switch, Series SmartSwitch

1 : $197.47

50

CC85LA120

Carlo Gavazzi Holding AG

IEC Contactor,3PST,NO,85Amps,120VAC Coil,Lug Terminal,DIN,CC Series

1 : $466.82

37

M3786/4-0885L

Grayhill Inc

Rotary Switches 44MG45-03-1-06N

1 : $450.36

5

CC85LA240

Carlo Gavazzi Holding AG

IEC Contactor,3PST,NO,85Amps,240VAC Coil,Lug Terminal,DIN,CC Series

1 : $319.66

4

RLS27XW285L35SQP

Banner Engineering Corp

Industrial Light Bars & Light Strips RLS27 Light Strip: Clear Lens Window; 285 mm; 12-30 V dc; IP67 IP69K; White; Non-Cascadable; 150 mm (6 in) 4-pin M12 Pigtail QD

1 : $524.99

3

1200185L3

ADTRAN Inc

Adtran Atlas 800 Series T1/PRI Module

1 : $2,199.93

2

WLS28-2XWGRYB5-0285L25S24Q

Banner Engineering Corp

Strip Light, 285mm, 650lm, GRN/RED/YEL/BLU, Non-Cascadable, 24VDC, QD, WLS28

1 : $740.59

0

485LDRC9

Advantech Co Ltd

RS-232 to RS-422 RS-485 Converter, RS-232 (TD, RD, GND) to RS-422/485 (TDA(-), TDB(+), RDA(-), RDB(+), GND)

1 : $296.42

0

Pasternack Enterprises US

PE3385LF/HS

Pasternack Enterprises

0

PE3W08285LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to N Female Cable Using RG58 Coax with HeatShrink, LF Solder. PE3W08285LF/HS is a N male to N female cable using RG58 coax. This Pasternack N male to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08285LF/HS N male to N female cable assembly is constructed with RG58 coax.

0

PE3C2585LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using PE-SR402FL Coax with HeatShrink, LF Solder. PE3C2585LF/HS is a SMA male to SMA male right angle cable using PE-SR402FL coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C2585LF/HS SMA male to SMA male right angle cable assembly is constructed with PE-SR402FL coax.

0

PE3W02585LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using RG400 Coax with HeatShrink, LF Solder. PE3W02585LF/HS is a N male to TNC male cable using RG400 coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02585LF/HS N male to TNC male cable assembly is constructed with RG400 coax.

0

PE3W02685LF-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-100 Coax, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 24 inch length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 24 inch length using LMR-100 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W02685LF-24 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W02685LF-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 24 inch length using LMR-100 coax, LF solder.

1 : $61.99
25 : $58.89
50 : $55.79
100 : $53.31

0

PE34285LF-18

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 18 inches. N Male to N Female Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly N male to N female cable 18 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE34285LF-18, can also be known as a N type plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE34285LF-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34285LF-18 can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Type N plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female cable 18 inch length using PE-SR405AL coax.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

0

PE35585LF/HS-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MCX Jack to MCX Plug Right Angle Cable 36 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly MCX jack to MCX plug right angle cable 36 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX jack to MCX plug right angle cable 36 inch length using RG316 coax with heatshrink, LF solder, MCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and right angle MCX cable connection on the other. Our MCX to right angle MCX cable assemblies have a jack gender on end 1 and plug on end 2. PE35585LF/HS-36 can also be known as a MCX female to right angle MCX male cable assembly and will be shipped same-day as it is purchased. MCX female to MCX male cable assembly PE35585LF/HS-36 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MCX jack to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35585LF/HS-36 can also be used in the other direction and will be right angle MCX plug to MCX jack cable assembly if the opposite connectivity is required. MCX female to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX jack to MCX plug right angle cable 36 inch length using RG316 coax with heatshrink, LF solder.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

0

PE39185LF/HS/PH180

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Male Right Angle Cable Using PE-C100-LSZH Coax with HeatShrink and 180 Deg. Clock, LF Solder. PE39185LF/HS/PH180 is a BNC male right angle to BNC male right angle cable using PE-C100-LSZH coax. This Pasternack BNC male right angle to BNC male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE39185LF/HS/PH180 BNC male right angle to BNC male right angle cable assembly is constructed with PE-C100-LSZH coax.

0

PE3C3385LF

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to BNC Male Cable Using RG188 Coax, LF Solder., Radio frequency assembly MCX plug right angle to BNC male cable using RG188 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MCX plug right angle to BNC male cable using RG188 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and BNC cable connection on the other. Our right angle MCX to BNC cable assemblies have a plug gender on end 1 and male on end 2. This MCX to BNC cable is a plug to male coax assembly, PE3C3385LF, can also be known as a right angle MCX male to BNC plug cable assembly and will be shipped same-day as it is purchased. MCX male to BNC plug cable assembly PE3C3385LF is built with RG188 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MCX right angle plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3385LF can also be used in the other direction and will be BNC male to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug right angle to BNC male cable using RG188 coax, LF solder.

0

PE3W08085LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to QMA Male Right Angle Cable Using RG316-DS Coax with HeatShrink, LF Solder. PE3W08085LF/HS is a MCX plug right angle to QMA male right angle cable using RG316-DS coax. This Pasternack MCX plug right angle to QMA male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm QMA for connector 2. MCX right angle to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08085LF/HS MCX plug right angle to QMA male right angle cable assembly is constructed with RG316-DS coax.

0

PE35585LF/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MCX Jack to MCX Plug Right Angle Cable 12 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly MCX jack to MCX plug right angle cable 12 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX jack to MCX plug right angle cable 12 inch length using RG316 coax with heatshrink, LF solder, MCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and right angle MCX cable connection on the other. Our MCX to right angle MCX cable assemblies have a jack gender on end 1 and plug on end 2. PE35585LF/HS-12 can also be known as a MCX female to right angle MCX male cable assembly and will be shipped same-day as it is purchased. MCX female to MCX male cable assembly PE35585LF/HS-12 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to right angle MCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MCX jack to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35585LF/HS-12 can also be used in the other direction and will be right angle MCX plug to MCX jack cable assembly if the opposite connectivity is required. MCX female to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX jack to MCX plug right angle cable 12 inch length using RG316 coax with heatshrink, LF solder.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

0

PE3885LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50. SMA Male to BNC Male Cable Using RG188 Coax, RoHS. PE3885LF is a SMA male to BNC male cable using RG188 coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3885LF SMA male to BNC male cable assembly is constructed with RG188 coax and the maximum VSWR is 1.4:1.

0

PE3C0185LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. BNC Male to SMP Female Cable Using RG178 Coax with HeatShrink, LF Solder. PE3C0185LF/HS is a BNC male to SMP female cable using RG178 coax. This Pasternack BNC male to SMP female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMP for connector 2. Our male BNC to female SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0185LF/HS BNC male to SMP female cable assembly is constructed with RG178 coax.

0

PE3W02685LF-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to SMA Male Low Loss Cable 200 cm Length Using LMR-100 Coax, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 200 cm length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 200 cm length using LMR-100 coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W02685LF-200CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W02685LF-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 200 cm length using LMR-100 coax, LF solder.

1 : $67.99
25 : $64.59
50 : $61.19
100 : $58.47

0

PE3W03785LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MMCX Plug to Reverse Thread SMA Female Bulkhead Cable Using RG178 Coax with HeatShrink, LF Solder, RoHS. PE3W03785LF/HS is a MMCX plug to reverse thread SMA female bulkhead cable using RG178 coax. This Pasternack MMCX plug to reverse thread SMA female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMCX to reverse thread female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03785LF/HS MMCX plug to SMA reverse thread female bulkhead cable assembly is constructed with RG178 coax.

0

85L-SM1-R nhà phân phối

Link URL