| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
8509L-AE3-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | 2298509-1 | TE Connectivity | Housing for MATE-AX Series Male Terminals Crimp Phosphor Bronze Reel - Trays (Alt: 2298509-1) RoHS : Not Compliant |
| 108,000 | |
| D-SCE-18-50-9-CS8766 | TE Connectivity | - Boxed Product (Development Kits) (Alt: CN9426-000) RoHS : Compliant |
| 0 | ||
| TW-20-09-G-D-185-095 | Samtec Inc | Board Stackers & Spacers, Pin Header, 4.7 mm, 40 Contacts, Solder, 2 Rows, 2 mm, TW Series - Bulk (Alt: TW-20-09-G-D-185-095) RoHS : Compliant |
| 0 | ||
| TW-28-05-S-D-385-090 | Samtec Inc | Board Stackers & Spacers, Pin Header, 9.78 mm, 56 Contacts, Solder, 2 Rows, 2 mm, TW Series - Bulk (Alt: TW-28-05-S-D-385-090) RoHS : Compliant |
| 0 | ||
| 85098-1 | TE Connectivity | - Tape and Reel (Alt: 85098-1) RoHS : Compliant |
| 0 | ||
| TW-02-09-L-S-285-090 | Samtec Inc | - Bulk (Alt: TW-02-09-L-S-285-090) RoHS : Compliant |
| 0 | ||
| 1-1985091-0 | TE Connectivity | - Bulk (Alt: 1-1985091-0) RoHS : Compliant | 0 | |||
| 502585-0972 | Molex | PCB Receptacle, 9 Contacts, 1 Row, 1.5mm, Tin, 2A, Female Receptacle, SMT, Right Angle, Copper Alloy - Tape and Reel (Alt: 5025850972) RoHS : Compliant |
| 0 | ||
| TW-10-07-F-D-485-090 | Samtec Inc | Board Stackers & Spacers, Pin Header, 12.32 mm, 20 Contacts, Solder, 2 Rows, 2 mm, TW Series - Bulk (Alt: TW-10-07-F-D-485-090) RoHS : Compliant |
| 0 | ||
| D-SCE-1K-38-50-9-CS7834 | TE Connectivity | - Tape and Reel (Alt: CW4706-000) RoHS : Compliant | 0 | |||
| ZW-49-10-G-S-585-090 | Samtec Inc | - Bulk (Alt: ZW-49-10-G-S-585-090) RoHS : Compliant | 0 | |||
| 1648509-1 | TE Connectivity | - Bag (Alt: 1648509-1) RoHS : Compliant |
| 0 | ||
| 1398509-1 | TE Connectivity | - Bulk (Alt: 1398509-1) RoHS : Not Compliant | 0 | |||
| 0248509100 | ITT Interconnect Solutions | - Bulk (Alt: 0248509100) RoHS : Not Compliant |
| 0 | ||
| 1985094-7 | TE Connectivity | - Bulk (Alt: 1985094-7) RoHS : Compliant | 0 | |||
![]() Newark | 2298509-2 | TE Connectivity | Inner Ferrule, Auto Pin/Socket Contact; Accessory Type:Inner Ferrule; For Use With:Amp Mate-Ax Series Automotive Pin & Socket Contacts; Product Range:Mate-Ax Series Rohs Compliant: Yes |Te Connectivity 2298509-2 RoHS : Compliant |
| 173,200 | |
| MP008509 | SPC Multicomp | Connector Housing, Rcpt, 9Pos, 3.96Mm; |Multicomp Pro MP008509 RoHS : Compliant |
| 4,959 | ||
| FMC0202085-09 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 9", 229Mm, Hs086; |Fairview Microwave FMC0202085-09 RoHS : Not Compliant |
| 4,822 | ||
| 218509-1083 | Molex | Cable Assy, 8P Rcpt-Rcpt, 300Mm; Connector To Connector:Milli-Grid Receptacle To Milli-Grid Receptacle; No. Of Positions:8Positions; Connector Pitch:2Mm; No. Of Rows:2 Row; Cable Length - Metric:300Mm; Cable Length - Imperial:11.8" Rohs Compliant: Yes RoHS : Compliant |
| 1,134 | ||
| 218509-1101 | Molex | Cable Assy, 10P Rcpt-Rcpt, 100Mm; Connector To Connector:Milli-Grid Receptacle To Milli-Grid Receptacle; No. Of Positions:10Positions; Connector Pitch:2Mm; No. Of Rows:2 Row; Cable Length - Metric:100Mm; Cable Length - Imperial:3.9" Rohs Compliant: Yes RoHS : Compliant |
| 543 | ||
| 87568-5093 | Molex | Idc Conn, Rcpt, 50Pos, 2Row, 2Mm; |Molex 87568-5093 (Alternate Part Number: 822348458394 RoHS : Compliant |
| 494 | ||
| 85099R | GEARWRENCH | Set Wr Rat Xl Met 16Pc Roll; |Gearwrench 85099R RoHS : Not Compliant |
| 57 | ||
| 218509-1064 | Molex | Cable Assy, 6P Rcpt-Rcpt, 600Mm; Connector To Connector:Milli-Grid Receptacle To Milli-Grid Receptacle; No. Of Positions:6Positions; Connector Pitch:2Mm; No. Of Rows:2 Row; Cable Length - Metric:600Mm; Cable Length - Imperial:23.6" Rohs Compliant: Yes RoHS : Compliant |
| 50 | ||
| 218509-1043 | Molex | Cable Assy, 4P Rcpt-Rcpt, 300Mm; Connector To Connector:Milli-Grid Receptacle To Milli-Grid Receptacle; No. Of Positions:4Positions; Connector Pitch:2Mm; No. Of Rows:2 Row; Cable Length - Metric:300Mm; Cable Length - Imperial:11.8" Rohs Compliant: Yes RoHS : Compliant |
| 50 | ||
| 218509-1082 | Molex | Cable Assy, 8P Rcpt-Rcpt, 150Mm; Connector To Connector:Milli Grid Receptacle To Milli Grid Receptacle; No. Of Positions:8Positions; Connector Pitch:2Mm; No. Of Rows:2 Row; Cable Length - Metric:150Mm; Cable Length - Imperial:5.9" Rohs Compliant: Yes RoHS : Compliant |
| 50 | ||
| 218509-1044 | Molex | Cable Assy, 4P Rcpt-Rcpt, 600Mm; Connector To Connector:Milli-Grid Receptacle To Milli-Grid Receptacle; No. Of Positions:4Positions; Connector Pitch:2Mm; No. Of Rows:2 Row; Cable Length - Metric:600Mm; Cable Length - Imperial:23.6" Rohs Compliant: Yes RoHS : Compliant |
| 40 | ||
| 885090 | Wurth Elektronik | Mlcc Capacitor Kit, 1Pf To 150Nf; |Würth Elektronik 885090 RoHS : Compliant |
| 6 | ||
| 1085094 | Phoenix Contact | Ethernet Switch, 8Port, 10/100Mbps; |Phoenix Contact 1085094 RoHS : Compliant |
| 3 | ||
| 685-09-V | Dwyer Instruments Inc | Pressure Transmitter, Diff, 250Pa; |Dwyer 685-09-V RoHS : Compliant |
| 1 | ||
| 8509 | Abbatron | Spacer; Body Diameter:0.25"; Bore Size:0 |Abbatron Hh Smith 8509 RoHS : Not Compliant |
| 0 | ||
![]() RS | DLCBS-6-01 (70208509) | Essentra Components | CIRCUIT BOARD SUPPORT, DUAL LOCKING, 4 MM, NYLON 6/6, 7.1 MM, 3/8 IN. |
| 19,384 | |
| 5308 509 | Altech Corporation | CABLE GLAND, PG-9, RANGE 0.098-0.315", POLYAMIDE, NEOPRENE SEAL, 5308 SERIES |
| 322 | ||
| B-8-50-9-C | Ideal Industries Inc | CBL TIE,8IN,50LB, NAT |
| 100 | ||
| 3685097 | Wakefield-Vette | RACK CABINET ACCESSORIES COLLAR SCREW CHEESE HEAD SLOTTED M2.5 X 11 PACK 100 |
| 37 | ||
| 2778509 | RS Pro | CONTACTOR, 24 V DC COIL, 3 POLE, 22 A, 11KW, 3 TO 400V, UL CE APPROVALS |
| 10 | ||
| 7785095 | RS Pro | TIMING BELT 190 TOOTH 396.08MM LENGTHX6MM WIDTH |
| 8 | ||
| 1828509 | RS Pro | MALE HDMI TO MALE HDMI PLUG 4K 16FT WHITE PVC SHEATH GOLD PLATED PLUGS |
| 6 | ||
| 4828509 | RS Pro | NICKEL PLATED BRASS PAN HEAD MACHINE SCREWS M2.5X25MM |
| 4 | ||
| NMA-8509 | Quest Technology International Inc | GREY 8C RJ-45 TO D-25 MALE MOD ADAPTER |
| 3 | ||
| 7388509 | RS Pro | 50M FIBRE OPTIC CABLE ASSEMBLY CONNECTOR A: ST CONNECTOR B: ST MULTI MODE OM1 |
| 2 | ||
| 185090F-01-1 | BEP | SWITCHABLE RESET 90A FLUSH MOUNT |
| 2 | ||
| 850908 (00051115359354) | 3M | STANDARD ABRASIVES BUFF AND BLEND HP DISC, 8 IN X 1/2 IN A VFN |
| 2 | ||
| 0054485099 | Apex Tool Group LLC | 0.5 MM STRAIGHT CONICAL SOLDERING IRON TIP FOR USE W/WXP65 &WP65 SOLDERING IRONS |
| 1 | ||
| 2X8A_82_MXPM-S50-0-1/-11_NE (85091060) | HUBER+SUHNER | RF CONNECTORS / COAXIAL CONNECTORS, PCB SOCKET 2.54 PITCH KEYED 16 POSITION |
| 1 | ||
| 8509 | HH Smith | SPACER; ROUND; ALUMINUM; #6 ID; 1/4" OD; 1 1/2" LENGTH |
| 0 | ||
![]() Rochester Electronics | NCV8509PDW18R2G![]() | onsemi | LDO Regulator, 100 mA 3.3 V / 1.8 V RoHS : Compliant |
| 2,186 | |
NCV8509PDW25R2G![]() | onsemi | LDO Regulator, 100 mA 5.0 V / 2.5 V RoHS : Compliant |
| 2,950 | ||
AD8509ARU-REEL![]() | Analog Devices Inc | Buffer/Inverter Based Peripheral Driver, 0.35A, CMOS, PDSO48 RoHS : Not Compliant |
| 58,356 | ||
AD8509ARUZ-REEL![]() | Analog Devices Inc | Buffer/Inverter Based Peripheral Driver, 0.35A, CMOS, PDSO48 RoHS : Compliant |
| 21,723 | ||
8509601EA![]() | Texas Instruments | IC Data Selector/Multiplexer 1 Element 2 x 4:1 MUX/DEMUX 4.5V - 5.5V 16-DIP Tube RoHS : Not Compliant |
| 164 | ||
CSD18509Q5BT![]() | Texas Instruments | MOSFET N-Channel 40V 100A (Ta) 8-SON T/R RoHS : Compliant |
| 5 | ||
ADS8509IDB![]() | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 28-SOP Tube RoHS : Compliant |
| 3 | ||
8509701EA![]() | Texas Instruments | IC Data Selector/Multiplexer 1 Element 4 x 2:1 MUX/DEMUX 4.5V - 5.5V 16-DIP Tube RoHS : Not Compliant |
| 183 | ||
| HA1-2850-9 | Harris Semiconductor | Operational Amplifier, 1 Func, 2000uV Offset-Max, BIPolar, CDIP14 RoHS : Not Compliant |
| 2,094 | ||
| HA7-2850-9 | Harris Semiconductor | Operational Amplifier, 1 Func, 2000uV Offset-Max, BIPolar, CDIP8 RoHS : Not Compliant |
| 338 | ||
| UPD46185092BF1-E40-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 2MX9, 0.45ns, CMOS, PBGA165 RoHS : Compliant |
| 239 | ||
| UPD46185094BF1-E33-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 2MX9, 0.45ns, CMOS, PBGA165 RoHS : Compliant |
| 236 | ||
| UPD46185094BF1-E40-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 2MX9, 0.45ns, CMOS, PBGA165 RoHS : Compliant |
| 571 | ||
![]() Sager | 8509 | Calex Mfg Co Inc | Datalogging & Acquisition | 0 | ||
| D-SCE-18-50-9-CS8766 | TE Connectivity | TE Connectivity D-SCE-18-50-9-CS8766 |
| 0 | ||
| D-SCE-2.5K-4.8-50-9 | TE Connectivity | Printers D-SCE-2.5K-4.8-50-9 | 0 | |||
| 9858509028 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858509073 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858509109 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9858509154 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 850-90-024-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Not Compliant |
| 0 | ||
| 850-90-031-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Not Compliant |
| 0 | ||
| 850-90-033-30-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Not Compliant |
| 0 | ||
| 850-90-040-30-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Not Compliant |
| 0 | ||
| 85098-1 | TE Connectivity | Automotive Connectors 070 MULTILOCK REC TML(2mm) RoHS : Compliant |
| 0 | ||
| TW-01-03-G-D-285-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-02-02-L-6-185-095 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-02-09-L-S-285-090 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
![]() TME | 85091-1 | TE Connectivity | Connector: wire-wire; female; Positive Lock; PIN: 2; straight; 10mm RoHS : Compliant |
| 69,000 | |
| 2850900000 | Weidmüller Interface GmbH & Co. KG | Body dim: 2x30.5x79.4mm; H: 79.4mm; yellow; UL94V-0; wemid RoHS : Compliant |
| 2,000 | ||
| 980-8509-000 | ITT Interconnect Solutions | Connector: circular |
| 483 | ||
| 218509-1043 | Molex | Connector: wire-wire/PCB; socket; female; data; Inom: 2A; 125V; 2mm |
| 300 | ||
| T0054485099 | Weller Hand Tools GmbH | Tip; conical; 0.5mm; for soldering iron |
| 61 | ||
| 031-8509-010 | ITT Interconnect Solutions | 031-8509-010 |
| 50 | ||
| 032U8509 | Danfoss A/S | Electromagnetic valve; G 1 1/4"; stainless steel; FKM; EV220B |
| 0 | ||
| 1850945 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 320V RoHS : Compliant |
| 0 | ||
| 1850990 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 320V RoHS : Compliant |
| 0 | ||
| 900850900 | AUER Signal GmbH | Description label; IP66; -30÷60°C; Eco Modul 70 |
| 0 | ||
| 87568-5093 | Molex | Connector: wire-wire/PCB; socket; female; data; Milli-Grid; PIN: 50 RoHS : Compliant |
| 0 | ||
| 1628509 | Phoenix Contact | Connector: M17; socket; M17 PRO; PIN: 7; 630V; 14A; IP67; 6+PE; angled RoHS : Compliant |
| 0 | ||
| 1850903 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 320V RoHS : Compliant |
| 0 | ||
| 1985094 | Gedore Torque Ltd | Hammer; 800mm; 5kg; copper; wood (hickory) |
| 0 | ||
| 10-085.09X005.33 X-RING NBR | Oring Uszczelnienia Techniczne | X-ring washer; NBR caoutchouc; Thk: 5.33mm; Øint: 85.9mm |
| 0 | ||
![]() ComSIT USA | 18509004 | Mentor Graphics | Electronic Component RoHS : Compliant | 200 | ||
| 18509006 | Mentor Graphics | Electronic Component RoHS : Compliant | 200 | |||
![]() Interstate Connecting Components | D-SCE-18-50-9-CS8766 | TE Connectivity | D-SCE-18-50-9-CS8766 | 0 | ||
| D-SCE-2.5K-4.8-50-9 | TE Connectivity | D-SCE-2.5K-4.8-50-9 |
| 0 | ||
| 85098-1 | TE Connectivity | 070 MULTILOCK REC TML(2MM) RoHS : Compliant |
| 0 | ||
| 8-509541-1 | TE Connectivity | UPGRADE LICENSE GAMMA 333 PC | 0 | |||
| 8-509910-1 | TE Connectivity | GEAR WHEEL Z32 | 0 | |||
| 8-509101-0 | TE Connectivity | STOP PIN SHORT | 0 | |||
| 8-509105-6 | TE Connectivity | BUTTON HEADER LABEL,EAO BUTTON | 0 | |||
| 8-509910-2 | TE Connectivity | BUSHING | 0 | |||
| 11108509-00 | TE Connectivity | AST4520Y00015P4X1355-SS:CTO-13 | 0 | |||
| ZHD-SCE-4.8-50-9 | TE Connectivity | EC9878-000 RoHS : Compliant |
| 0 | ||
| D-SCE-5K-4.8-50-9-CS87 | TE Connectivity | D-SCE-5K-4.8-50-9-CS8766 | 0 | |||
| 1648509-1 | TE Connectivity | 772-45-0080G |
| 0 | ||
| 003-8509-000 | ITT Interconnect Solutions | 003-8509-000 | 0 | |||
| 04-1298-5091 | TE Connectivity | RT8420-0R50-232-1120 | 0 | |||
| 2298509-2 | TE Connectivity | MINI COAX SHIELD CRIMP FERRULE RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | 075-8509-000 | ITT Interconnect Solutions | RoHS : Compliant |
| 236 | |
| 88-538509-46P | Amphenol Corporation |
| 0 | |||
| 248-8509-000 | ITT Interconnect Solutions |
| 0 | |||
| 88-538509-46E | Amphenol Aerospace |
| 0 | |||
| A4593-085-095-0 | Amphenol Positronic |
| 0 | |||
| 075-8509-001 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 21-033385-091 | Amphenol Corporation |
| 0 | |||
| 052-8509-004 | ITT Interconnect Solutions |
| 0 | |||
| 23A03138-509 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 85091-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 45,540 | |
| 85098-1 | TE Connectivity | Terminals RoHS : Compliant |
| 2,640 | ||
| D-SCE-2.5K-4.8-50-9 | TE Connectivity | Connectors |
| 1,650 | ||
| ZHD-SCE-4.8-50-9 | TE Connectivity | Connectors RoHS : Compliant |
| 1,650 | ||
| TW-03-09-L-D-185-095 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 271 | ||
| ZW-04-10-G-S-585-090 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 229 | ||
| ZW-04-14-T-D-1185-090-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 143 | ||
| TW-20-08-S-D-585-090 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 120 | ||
| TW-20-09-G-D-185-095 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 120 | ||
| TW-14-05-S-D-385-090 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 86 | ||
| TW-25-11-G-D-185-090 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 70 | ||
| TW-28-05-S-D-385-090 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 35 | ||
| 85093-41 | Honeywell Sensing and Control | Switch |
| 20 | ||
| 850910-1 | TE Connectivity | Unspecified Connectors RoHS : Not Compliant |
| 16 | ||
| 11108509-00 | TE Connectivity | SENSOR (TE REF 11108509-00) |
| 2 | ||
![]() PUI | 12.85090 | 5 | ||||
![]() Richardson RFPD | 85095631 | HUBER+SUHNER | 11_NEX10-50-5-X1/000_-H RoHS : Compliant | 0 | ||
| 85096478 | HUBER+SUHNER | Conn Standard Termination, Low Power RoHS : Compliant |
| 0 | ||
| 80385098 | HUBER+SUHNER | 80385098 RoHS : Compliant | 0 | |||
| 85092476 | HUBER+SUHNER | Conn 7/16-NEX10 Adapter 0Hz to 7.5GHz 50Ohm ST PL/ RoHS : Compliant |
| 0 | ||
| 85099127 | HUBER+SUHNER | 85099127 RoHS : Compliant |
| 0 | ||
| 85090660 | HUBER+SUHNER | RF CUSTOM CABLE ASSY RoHS : Not Compliant | 0 | |||
| 85093207 | HUBER+SUHNER | SF526S/11N/11N/48in | 0 | |||
| 85096088 | HUBER+SUHNER | SF526S/11SMA/11N/500mm | 0 | |||
| 85093244 | HUBER+SUHNER | Microwave Test Assemblies, N (Male), N (Male), 50 RoHS : Compliant |
| 0 | ||
| 85094630 | HUBER+SUHNER | Conn NEX10 0Hz to 20GHz 50Ohm Solder ST Flange Mou RoHS : Compliant |
| 0 | ||
| 85091563 | HUBER+SUHNER | Stripping Tool for Quick Fit |
| 0 | ||
| 85096270 | HUBER+SUHNER | RF STD CABLE ASSY RoHS : Compliant | 0 | |||
| 85091361 | HUBER+SUHNER | Conn NEX10 0Hz to 20GHz 50Ohm Solder ST Cable Moun RoHS : Compliant |
| 0 | ||
| 85092090 | HUBER+SUHNER | SF526S/11PC35/11PC35/3500mm | 0 | |||
| 85094773 | HUBER+SUHNER | SENCITY® Spot-M 2x2 WiFi MIMO Antenna |
| 0 | ||
![]() Chip 1 Exchange | 85091-1 | TE Connectivity | INSTOCK RoHS : Compliant | 89,700 | ||
| HX-SCE-2.5K-4.8-50-9 | TE Connectivity | INSTOCK | 13,000 | |||
| D-SCE-18-50-9 | TE Connectivity | INSTOCK | 5,200 | |||
| D-SCE-1K-18-50-9 | TE Connectivity | INSTOCK RoHS : Compliant | 5,187 | |||
| D-SCE-1K-38-50-9 | TE Connectivity | INSTOCK RoHS : Compliant | 3,900 | |||
| 12.8509 | Geyer Electronic E K | INSTOCK | 5 | |||
| 1D85098-521 | INSTOCK | 2 | ||||
| 1D85098-533 | INSTOCK | 1 | ||||
| 1D85098-535 | INSTOCK | 1 | ||||
| 1D85098-519 | INSTOCK | 1 | ||||
| 1D85098-523 | INSTOCK | 1 | ||||
| 1D85093-1 | INSTOCK | 1 | ||||
| 1D85098-527 | INSTOCK | 1 | ||||
| 1D85093-2 | INSTOCK | 1 | ||||
| 1D85098-531 | INSTOCK | 1 | ||||
![]() Avnet Abacus | 85098-1 | TE Connectivity | (Alt: 85098-1) RoHS : Compliant | 0 | ||
| 1850958 | Phoenix Contact | FRONTMC 1512STF381 FRONTMC1512STF381 (Alt: 1850958) RoHS : Compliant | 0 | |||
| 85091-1 | TE Connectivity | (Alt: 85091-1) RoHS : Compliant | 0 | |||
| 850910-1 | TE Connectivity | Conn LGH RCP 1 POS ST Cable Mount 1 Terminal 1 Port (Alt: 850910-1) RoHS : Not Compliant | 0 | |||
| 850910-1 | TE Connectivity | Conn LGH RCP 1 POS ST Cable Mount 1 Terminal 1 Port (Alt: 850910-1) RoHS : Not Compliant | 0 | |||
| 85095031 | Qnity Laird | Absorbing Sheet Rectangular Shape Silicone Elastomer Black 12in x 12in x 003in Bulk (Alt: 85095031) RoHS : Compliant | 0 | |||
| 1648509-1 | TE Connectivity | (Alt: 1648509-1) RoHS : Compliant | 0 | |||
| 2298509-2 | TE Connectivity | (Alt: 2298509-2) RoHS : Compliant | 0 | |||
| 1888509-1 | TE Connectivity | (Alt: 1888509-1) RoHS : Compliant | 0 | |||
| 2185091083 | Molex | Cable Assembly UL 10002 24AWG 03m 8Position Wire to Board to 8Position Wire to Board ReceptacleRe (Alt: 2185091083) RoHS : Compliant | 0 | |||
| 878509-000 | TE Connectivity | AMP878509000 (Alt: 878509-000) RoHS : Compliant | 0 | |||
| 878509-000 | TE Connectivity | AMP878509000 (Alt: 878509-000) RoHS : Compliant | 0 | |||
| 052-8509-002 | ITT Interconnect Solutions | Connector Accessories Alignment Disc for Pin Contact (Alt: 052-8509-002) RoHS : Compliant | 0 | |||
| FW-03-03-G-D-085-090 | Samtec Inc | Conn Board Stacker HDR 6 POS 216mm Stack Height 127mm Solder ST SMD (Alt: FW-03-03-G-D-085-090) RoHS : Compliant | 0 | |||
| TW-07-12-F-D-885-090 | Samtec Inc | (Alt: TW-07-12-F-D-885-090) RoHS : Compliant | 0 | |||
![]() Avnet Asia | B39851B8509P810 | Qualcomm RFFE Filter Products | (Alt: B39851B8509P810) RoHS : Compliant | 0 | ||
| 0875685093 | Molex | (Alt: 0875685093) RoHS : Compliant | 0 | |||
| 0022285094 | Molex | (Alt: 0022285094) RoHS : Compliant | 0 | |||
| 850957-000 | TE Connectivity | (Alt: 850957-000) RoHS : Compliant | 0 | |||
0528850974![]() | Molex | (Alt: 0528850974) RoHS : Compliant | 0 | |||
![]() Avnet Silica | L128-5090SA35A00B1 | Lumileds | LUXEON 2835 Commercial 3VCoolwhite 2835 S 3V 90 CRI Full Distribution5000K90 (Alt: L128-5090SA35A00B1) RoHS : Compliant | 0 | ||
| L128-5090EA3500001 | Lumileds | (Alt: L128-5090EA3500001) RoHS : Compliant | 0 | |||
| L128-5090CA3500005 | Lumileds | LED COOLWHITE 2835C 3V CCT5000KCRI90 3 SDCM ONLY D (Alt: L128-5090CA3500005) RoHS : Compliant | 0 | |||
| L128-5090EC3500001 | Lumileds | (Alt: L128-5090EC3500001) RoHS : Compliant | 0 | |||
| L128-5090CB3500001 | Lumileds | (Alt: L128-5090CB3500001) RoHS : Compliant | 0 | |||
| L128-5090SA35A00E5 | Lumileds | (Alt: L128-5090SA35A00E5) RoHS : Compliant | 0 | |||
| L128-5090NA3500005 | Lumileds | LED Chip Neutral White 5000K 300mA 2Pin SMD TR (Alt: L128-5090NA3500005) RoHS : Compliant | 0 | |||
| L128-5090SA35A00D5 | Lumileds | LUXEON 2835 Commercial 3VCoolwhite 2835 S 3V 90 CRI 3 SDCM D5000K90 (Alt: L128-5090SA35A00D5) RoHS : Compliant | 0 | |||
| L128-5090EC3500005 | Lumileds | (Alt: L128-5090EC3500005) RoHS : Compliant | 0 | |||
| L128-5090SA35A00G1 | Lumileds | (Alt: L128-5090SA35A00G1) RoHS : Compliant | 0 | |||
| L128-5090CA3500001 | Lumileds | (Alt: L128-5090CA3500001) RoHS : Compliant | 0 | |||
| L128-5090SA35A00A1 | Lumileds | LUXEON 2835 Commercial 3VCoolwhite 2835 S 3V 90 CRI Full Distribution5000K90 (Alt: L128-5090SA35A00A1) RoHS : Compliant | 0 | |||
| L128-5090SA35A00F5 | Lumileds | LED Chip Cool White 5000K 350mA 2Pin SMD TR (Alt: L128-5090SA35A00F5) RoHS : Compliant | 0 | |||
| L128-5090HA35000K1 | Lumileds | LED Chip Cool White 5000K 480mA 2Pin SMD TR (Alt: L128-5090HA35000K1) RoHS : Compliant | 0 | |||
| C18509_DAISY-MINI-3X1-SHD-MATT | LEDIL | Shade for LM28xB LEDs Polycarbonate Black with Matt Finish Box (Alt: C18509_DAISY-MINI-3X1-SHD-MATT) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 385-091 | Spaenaur | IN STOCK SHIP TODAY | 4,000 | ||
| 548509-0100 | IN STOCK SHIP TODAY | 4 | ||||
| 2207-7985-09 | MACOM | IN STOCK SHIP TODAY | 2 | |||
![]() DB Roberts | E5-1-085-090 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | ||
| E5-1-085-091 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-2-085-090 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 1285096 | Essentra Components | 0 | ||||
| 1285097 | Essentra Components | 0 | ||||
| 498509 | Essentra Components | 0 | ||||
| E5-2-085-091 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 20828509 | Essentra Components | 0 | ||||
| 58-28-509-24 | Southco | PANEL SCREW 6-32 | 0 | |||
| 1285098 | Essentra Components | 0 | ||||
![]() EBV Elektronik | QEDM-8509 | Broadcom Limited | Optical ShaftEncoder Components (Alt: QEDM-8509) RoHS : Compliant | 0 | ||
| CXM-18-50-90-36-AA30-F4-3 | Luminus Devices | CXM18 (Alt: CXM-18-50-90-36-AA30-F4-3) RoHS : Compliant | 0 | |||
| CXM-18-50-90-36-AA40-F5-3 | Luminus Devices | (Alt: CXM-18-50-90-36-AA40-F5-3) RoHS : Compliant | 0 | |||
| CXM-18-50-90-36-AA00-F2-3 | Luminus Devices | CXM18 (Alt: CXM-18-50-90-36-AA00-F2-3) RoHS : Compliant | 0 | |||
| C18509_DAISY-MINI-3X1-SHD-MATT | LEDIL | Shade for LM28xB LEDs Polycarbonate Black with Matt Finish Box (Alt: C18509_DAISY-MINI-3X1-SHD-MATT) RoHS : Compliant | 0 | |||
![]() Flip Electronics | L128-5090EC3500001 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 348,000 | |
| L128-5090NA3500001 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 40,000 | ||
| L128-5090CA3500001 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 8,000 | ||
![]() Master Electronics | D-SCE-18-50-9-CS8766 | TE Connectivity | Cable Accessories Marker Sleeve Polyolefin White Piece MOQ Reduction RoHS : Compliant |
| 0 | |
| D-SCE-2.5K-4.8-50-9 | TE Connectivity | Cable Accessories Marker Sleeve Polyolefin White Box RoHS : Compliant |
| 0 | ||
| 85098-1 | TE Connectivity | 070 MULTILOCK REC TML(2mm) RoHS : Compliant |
| 0 | ||
| TW-01-03-G-D-285-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-02-02-L-6-185-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-02-02-S-S-185-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-02-03-F-5-285-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-02-09-L-S-285-090 | Samtec Inc | Flexible Surface Mount Board Stacking Header |Samtec TW-02-09-L-S-285-090 RoHS : Compliant |
| 0 | ||
| TW-03-07-F-T-485-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-04-03-S-Q-285-095 | Samtec Inc | 2Mm Terminal Strips |Samtec Inc. TW-04-03-S-Q-285-095 RoHS : Compliant |
| 0 | ||
| TW-04-12-L-D-785-090 | Samtec Inc | Conn Board Stacker HDR 8 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| TW-06-02-F-D-185-095 | Samtec Inc | Conn Board Stacker HDR 12 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| TW-06-02-L-T-185-095 | Samtec Inc | Conn Board Stacker HDR 18 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| TW-06-02-T-D-185-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-07-08-F-D-585-090 | Samtec Inc | Conn Board Stacker HDR 14 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8509 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and type N bulkhead cable connection on the other. Our low PIM type N to N type cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C8509, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C8509 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts. | 468 | ||
| PE3C8509/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. | 208 | |||
| PE3C8509-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 100 CM., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 100 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 100 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C8509-100CM, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C8509-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-100CM can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 100 CM. |
| 52 | ||
| PE3C8509-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 12 inch., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 12 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 12 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C8509-12, can also be known as a low PIM N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8509-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-12 can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 12 inch. |
| 52 | ||
| PE3C8509/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable 60 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable 60 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP-60 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP-60 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP-60 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 52 | ||
| PE3C8509-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 150 CM., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 150 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 150 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C8509-150CM, can also be known as a low PIM type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3C8509-150CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-150CM can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 150 CM. |
| 52 | ||
| PE3C8509-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 200 CM., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 200 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 200 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C8509-200CM, can also be known as a low PIM N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C8509-200CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-200CM can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 200 CM. |
| 52 | ||
| PE3C8509-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 60 inch., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 60 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 60 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our low PIM N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C8509-60, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8509-60 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-60 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 60 inch. |
| 52 | ||
| PE3C8509-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 36 inch., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 36 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 36 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3C8509-36, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8509-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-36 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 36 inch. |
| 52 | ||
| PE3C8509-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated N Male to N Female Bulkhead Cable Using SPO-250 Coax Using Times Microwave Parts in 50 CM., Radio frequency assembly outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 50 CM from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 50 CM, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and N type bulkhead cable connection on the other. Our low PIM type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3C8509-50CM, can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3C8509-50CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8509-50CM can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N male to N female bulkhead cable using SPO-250 coax using Times Microwave parts in 50 CM. |
| 52 | ||
| PE3C8509/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Bulkhead Low Loss Cable 36 Inch Length Using SPO-250 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) bulkhead low loss cable 36 inch length using SPO-250 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C8509/WP-36 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE3C8509/WP-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8509/WP-36 is built with SPO-250 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8509/WP-36 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 52 | ||
| PE3C10850-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female to SMP Female Non-Magnetic Cable 9 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10850-9 non-magnetic SMP female to SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10850-9 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10850-9 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 9-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 5 | ||
| PE3W08509 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Bulkhead Cable Using PE-C195 Coax. PE3W08509 is a TNC male right angle to TNC female bulkhead cable using PE-C195 coax. This Pasternack TNC male right angle to TNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08509 TNC male right angle to TNC female bulkhead cable assembly is constructed with PE-C195 coax. | 0 | |||
| PE3W18509 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Male to SMA Female Cable Using LMR-195 Coax. PE3W18509 is a TNC male to SMA female cable using LMR-195 coax. This Pasternack TNC male to SMA female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18509 TNC male to SMA female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE38509 | Pasternack Enterprises | 0 | ||||
![]() Vyrian | MF-R185-0-99 | Bourns Inc | PTC Resettable Fuse, 30V, Through Hole Mount RoHS : Compliant | 16,363 | ||
NCV8509PDW18R2G![]() | onsemi | Fixed Positive Standard Regulator, 2 Output, 3.3V1, 1.8V2, BIPolar, PDSO16 RoHS : Compliant | 12,997 | |||
NCV8509PDW26G![]() | onsemi | Fixed Positive Standard Regulator, 2 Output, 5V1, 2.6V2, BIPolar, PDSO16 RoHS : Compliant | 11,958 | |||
| UPD46185094BF1-E33-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 2MX9, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 11,563 | |||
NCV8509PDW26R2G![]() | onsemi | Fixed Positive Standard Regulator, 2 Output, 5V1, 2.6V2, BIPolar, PDSO16 RoHS : Compliant | 10,227 | |||
NCV8509PDW25G![]() | onsemi | Fixed Positive Standard Regulator, 2 Output, 5V1, 2.5V2, BIPolar, PDSO16 RoHS : Compliant | 9,756 | |||
| PEX8509 | Broadcom Limited | 9,710 | ||||
| MABA-008509-CT69TB | M/a-com Technology Solutions | RF Transformer, 50MHz Min, 1200MHz Max | 9,228 | |||
| UPD46185092BF1-E40-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 2MX9, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 8,325 | |||
NCV8509PDW25R2G![]() | onsemi | Fixed Positive Standard Regulator, 2 Output, 5V1, 2.5V2, BIPolar, PDSO16 RoHS : Compliant | 7,195 | |||
| PEX8509-AARDKKIT | Broadcom Limited | 7,010 | ||||
| UPD46185094BF1-E40-EQ1-A | Renesas Electronics Corporation | QDR SRAM, 2MX9, 0.45ns, CMOS, PBGA165 RoHS : Compliant | 4,145 | |||
| PEX8509-AA25BI | Broadcom Limited | 3,987 | ||||
| 8509 | Microchip Technology Inc | HCMOS Output Clock Oscillator, 12.8MHz Nom | 3,420 | |||
5962-9850901NTB![]() | AMD Xilinx | Field Programmable Gate Array, 28000 Gates, 143MHz, 2432-Cell, CMOS RoHS : Not Compliant | 2,173 | |||
![]() Waytek, Inc. | 131850-91W | General Cable Technologies Corporation | 20GA GXL Pink Cross-Link Automotive Wire XLPE -51C to 125C |
| 34,000 | |
![]() Win Source Electronics | CSD18509Q5B![]() | Texas Instruments | MOSFET N-CH 40V 100A 8VSON RoHS : Compliant |
| 50,650 | |
CSD18509Q5BT![]() | Texas Instruments | MOSFET N-CH 40V 100A 8VSON / Trans MOSFET N-CH Si 40V 100A 8-Pin VSON-CLIP EP T/R RoHS : Compliant |
| 47,110 | ||
| RT8509GQW | Richtek Technology Corp | IC REG BOOST ADJ 3A 10WDFN RoHS : Compliant |
| 10,999 | ||
ADS8509IDW![]() | Texas Instruments | IC ADC 16BIT 250KSPS SRL 20SOIC RoHS : Compliant |
| 2,000 | ||
ADS8509IDWRG4![]() | Texas Instruments | 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER RoHS : Compliant |
| 1,850 | ||
ADS8509IDWR![]() | Texas Instruments | 1-Channel Single ADC SAR 250ksps 16-bit Serial 20-Pin SOIC T/R / IC ADC 16BIT 250KSPS SRL 20-SOIC RoHS : Compliant |
| 1,840 | ||
| PEX8509-AA25BI | Broadcom Limited | IC PCI EXPRESS SWITCH / Switch IC Channel |
| 400 | ||
ADS8509IBDWRG4![]() | Texas Instruments | 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER | IC ADC 16BIT SAR 20SOIC RoHS : Compliant |
| 360 | ||
ADS8509IBDW![]() | Texas Instruments | 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER RoHS : Compliant |
| 328 | ||
ADS8509IBDWR![]() | Texas Instruments | 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER RoHS : Compliant |
| 230 | ||
ADS8509IBDWG4![]() | Texas Instruments | 16-BIT 250-KSPS SERIAL CMOS SAMPLING ANALOG-TO-DIGITAL CONVERTER | IC ADC 16BIT SAR 20SOIC RoHS : Compliant |
| 42 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |