| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
83818NF-V1-R5 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | 2301838-1 | TE Connectivity | D Sub Connector, DB9, Standard, Receptacle, 9 Contacts, DE, Solder - Trays (Alt: 2301838-1) RoHS : Compliant |
| 8,562 | |
| 206838-1 | TE Connectivity | - Bulk (Alt: 206838-1) RoHS : Compliant |
| 7,384 | ||
| 205838-1 | TE Connectivity | Circular Connector, CPC Series 2, Cable Mount Plug, 8 Contacts - Bag (Alt: 205838-1) RoHS : Compliant |
| 1,200 | ||
| 208381-0405 | Molex | PICO-CLASP1.0 SRVTETP .38GLHNAT 4CKT - Tape and Reel (Alt: 2083810405) RoHS : Compliant |
| 0 | ||
| 208381-1215 | Molex | PICO-CLASP1.0 SRVTETP .38GLHBLK 12CKT - Tape and Reel (Alt: 2083811215) RoHS : Compliant |
| 0 | ||
| 208381-1503 | Molex | PICO-CLASP1.0 SRVTETP .76GLHNAT 15CKT - Tape and Reel (Alt: 2083811503) RoHS : Compliant |
| 0 | ||
| 1983810000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1983810000) RoHS : Not Compliant |
| 0 | ||
| 2838120000 | Weidmüller Interface GmbH & Co. KG | SUZ 10.16HP/05/180DF AG BK BX - Bulk (Alt: 2838120000) RoHS : Not Compliant |
| 0 | ||
| ARC6-08-38.1-LU-LD-2-1 | Samtec Inc | B43733F2688M650 - Bulk (Alt: ARC6-08-38.1-LU-LD-2-1) RoHS : Compliant |
| 0 | ||
| GW JDSTS2.CM-GVH2-A838-1 | ams OSRAM Group | LED Chip Warm White 2700K 180mA 4-Pin SMD T/R - Tape and Reel (Alt: Q65112A8884) RoHS : Compliant |
| 0 | ||
| LTE-R38381S-S-U | Lite-On Semiconductor Corporation | - Tape and Reel (Alt: LTE-R38381S-S-U) RoHS : Not Compliant | 0 | |||
| 208381-0713 | Molex | PICO-CLASP1.0 SRVTETP .76GLHBLK 7CKT - Tape and Reel (Alt: 2083810713) RoHS : Compliant |
| 0 | ||
| 208381-1109 | Molex | PICO-CLASP1.0 SRVTETP TINLHNAT 11CKT - Tape and Reel (Alt: 2083811109) RoHS : Compliant |
| 0 | ||
| N838-10M | Tripp Lite | - Bulk (Alt: N838-10M) RoHS : Compliant | 0 | |||
| 208381-0219 | Molex | PICO-CLASP1.0 SRVTETP TINLHBLK 2CKT - Tape and Reel (Alt: 2083810219) RoHS : Compliant |
| 0 | ||
![]() Newark | MAL211838109E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 10Uf, 63V, 20%, Axial; Capacitance:10Μf; Voltage(Dc):63V; Capacitance Tolerance:± 20%; Capacitor Terminals:Axial Leaded; Lifetime @ Temperature:4000 Hours @ 125°C; Polarity:Polar; Lead Spacing:- Rohs Compliant: Yes RoHS : Compliant |
| 648 | |
| 2301838-1 | TE Connectivity | D-Sub Connector, Rcpt, De-9Pos, Th; D Sub Connector Type:Standard; Gender:Receptacle; Product Range:-; No. Of Contacts:9Contacts; D Sub Shell Size:De; Contact Termination Type:Solder; Connector Mounting:Through Hole Mount Rohs Compliant: Yes RoHS : Compliant |
| 509 | ||
| 205838-1 | TE Connectivity | Circular Connector, Plug, 11-8, Cable; |Te Connectivity Amp 205838-1 RoHS : Compliant |
| 266 | ||
| TW-08-12-S-D-838-122 | Samtec Inc | Conn Stack Brd, 2Mm, 16Pos, Hdr; |Samtec, Inc. TW-08-12-S-D-838-122 RoHS : Compliant |
| 190 | ||
| HW-17-20-G-D-838-110 | Samtec Inc | Conn Stack Brd, 2.54Mm, 34Pos, Hdr; |Samtec, Inc. HW-17-20-G-D-838-110 RoHS : Compliant |
| 107 | ||
| 8381K108 | Eaton Corporation | Switch, Toggle, Spst, 7A, 125V; Switch Operation:On-Off; Contact Configuration:Spst; Illumination:Non Illuminated; Product Range:-; Contact Current Max:7A; Switch Mounting:-; Contact Voltage Ac Nom:125V; Switch Terminals:Solder Rohs Compliant: No RoHS : Not Compliant |
| 45 | ||
| 20838-110 | nVent Schroff | Panel, Aluminium, 3U, 6Hp, Pk5; |Nvent Schroff 20838-110 RoHS : Compliant |
| 19 | ||
| 783816-02 | NI | Controller, Compactrio, Sbrio-9607; |Ni/emerson 783816-02 RoHS : Compliant |
| 15 | ||
| CDSC483816LG | nVent Hoffman | Metal Enclosure; |Nvent Hoffman CDSC483816LG RoHS : Compliant |
| 11 | ||
| 99783810 | Crouzet | Electromech Hour Cnt Chm40X27 10-80Vdc; |Crouzet 99783810 RoHS : Compliant |
| 5 | ||
| 20838-146 | nVent Schroff | Panel, Aluminium, 3U, 42Hp; |Nvent Schroff 20838-146 RoHS : Compliant |
| 4 | ||
| 8381 | Keystone Electronics Corp | Terminal, Wire Splice, 10Awg, Yellow; Product Range:T Series; Termination:Idc/Idt; Wire Size Awg Min:16Awg; Wire Size Awg Max:10Awg; Conductor Area Csa:-; Terminal Type:Wire Splice; Insulator Colour:Yellow Rohs Compliant: Yes |Keystone 8381 RoHS : Compliant |
| 2 | ||
| 20838-114 | nVent Schroff | Panel, Aluminium, 3U, 10Hp, Pk5; |Nvent Schroff 20838-114 RoHS : Compliant |
| 2 | ||
| FMCA2838-100CM | Fairview Microwave Inc | Tnc Male-Tnc Female Blkd Cbl Tinned Alu; |Fairview Microwave FMCA2838-100CM RoHS : Not Compliant |
| 1 | ||
| 8381 | Abbatron | Standoff, Alu, 10-32; |Abbatron Hh Smith 8381 RoHS : Compliant |
| 0 | ||
![]() RS | 10-838137-01D | Amphenol Industrial Operations | WIRE SEAL; USED WITH INSULATED WIRES 1.2-1.8 MM; SILICONE; TRU-LOC |
| 4,935 | |
| 927838-1 (7181134P) | TE Connectivity | STANDARD POWER TIMER SOCKET CONTACT |
| 109 | ||
| 8381K107 | Eaton Vehicle and Commercial Controls | TOGGLE SWITCH, SPST, ON-NONE-OFF,.500" ACTUATOR,6A,125VAC/DC,3A,250VDC, SOLDER TERM |
| 104 | ||
| 2658381 | RS Pro | BALL END HEX KEY 5MM (EXTRA-LONG ARM) PA |
| 100 | ||
| SVP08-3,81 | Altech Corporation | PLUGGABLE PCB TERMINAL BLOCK,8P,3.81MM PS, VERTICAL,11A,300V,30-14AWG, GREEN |
| 50 | ||
| 183811 | RS Pro | HRC COUPLING INSERT 1.65IN (42MM) BORE 5IN (130MM) LENGTH NITRILE RUBBER |
| 20 | ||
| 1683.8101 | Marquardt Switches Inc | PUSHBUTTON SWITCH, SPST/ON-OFF, IP65, 12A, NON-ILLUMINATED, BLACK, 1660 SERIES |
| 10 | ||
| 2838199 (VAL-MS 230/3+1 FM) | Phoenix Contact | SURGE VOLTAGE;ARRESTER BASE ELEMENT W/REMOTE INDICATOR |
| 7 | ||
| 4838124 | RS Pro | HEX SOCKET CAP STEEL BRIGHT ZINC PLATEDSOCKET SCREW M2.5X6MM |
| 2 | ||
| 2778381 | RS Pro | AUXILIARY CONTACT BLOCK, 1NO + 1NC, COMPACT, SCREW MOUNT, UL CE APPROVALS |
| 2 | ||
| LPA-LAT-1 (83817) | Banner Engineering Corp | LPA-LAT-1 LASER ALIGNMENT TOOL CLIP ONLY FOR EZ-SCREEN LP |
| 2 | ||
| 8381-1032-A-24 | RAF Electronic Hardware | HANDLE, ALUMINUM, 10-32, BLACK ANODIZE, 5 IN., 1-3/4 IN., 5/8 IN. |
| 1 | ||
| 2838173 (TT-2/2- 24DC) | Phoenix Contact | TERMINAL BLOCK CONNECTOR SURGE PROTECTION 2 POSITION 24 TO 14 AWG 24 VDC 300 MA |
| 1 | ||
| RL31-54/25/73C/136 (183810) | PEPPERL+FUCHS GmbH | RETROREFLECTIVE PE SENSOR 9000MM DETECTION RANGE PUSH PULL OUTPUT BLOCK STYLE |
| 1 | ||
| 8381 | Dichtomatik | O-RING, 249,20 5,70 90 NBR NB9028 |
| 0 | ||
![]() Microchip Technology Inc | AT28C256E-25LM/883-815![]() | Microchip Technology Inc | 250NS, LCC, 883C; LEV B COMPLIANT, CLCC, Projected EOL: 2045-12-22 RoHS : Compliant |
| 304 | |
| AT28C256F-15LM/883-815 | Microchip Technology Inc | 150NS, LCC, 883C; LEV B COMPLIANT, CLCC, Projected EOL: 2045-12-22 RoHS : Compliant |
| 170 | ||
AT28C256-20UM/883-815![]() | Microchip Technology Inc | 200NS, PGA, 883C; LEV B COMPLIANT, CPGA, Projected EOL: 2045-12-22 RoHS : Compliant |
| 100 | ||
| AT28C256-25DM/883-815 | Microchip Technology Inc | 250NS, CERDIP, 883C; LEV B COMPLIANT, CERDIP, Projected EOL: 2041-08-11 RoHS : Compliant |
| 73 | ||
AT28C256-15LM/883-815![]() | Microchip Technology Inc | 150NS, LCC, 883C; LEV B COMPLIANT, CLCC, Projected EOL: 2041-04-09 RoHS : Compliant |
| 68 | ||
AT28C256-25LM/883-815![]() | Microchip Technology Inc | 250NS, LCC, 883C; LEV B COMPLIANT, CLCC, Projected EOL: 2045-12-22 RoHS : Compliant |
| 34 | ||
| AT28C256-20DM/883-815 | Microchip Technology Inc | 200NS, CERDIP, 883C; LEV B COMPLIANT, CERDIP, Projected EOL: 2040-11-26 RoHS : Compliant |
| 19 | ||
| AT28C256-15DM/883-815 | Microchip Technology Inc | 150NS, CERDIP, 883C; LEV B COMPLIANT, CERDIP, Projected EOL: 2041-09-18 RoHS : Compliant |
| 14 | ||
| AT28C256F-15DM/883-815 | Microchip Technology Inc | 150NS, CERDIP, 883C; LEV B COMPLIANT, CERDIP, Projected EOL: 2040-11-14 RoHS : Compliant |
| 14 | ||
AT28C256-15FM/883-815![]() | Microchip Technology Inc | 150NS, FLATPACK, 883C; LEV B COMPLIANT, FLATPACK, Projected EOL: 2046-10-12 RoHS : Compliant |
| 0 | ||
AT28C256-15UM/883-815![]() | Microchip Technology Inc | 150NS, PGA, 883C; LEV B COMPLIANT, CPGA, Projected EOL: 2045-12-22 RoHS : Compliant |
| 0 | ||
AT28C256E-15FM/883-815![]() | Microchip Technology Inc | 150NS, FLATPACK, 883C; LEV B COMPLIANT, FLATPACK, Projected EOL: 2045-12-22 RoHS : Compliant |
| 0 | ||
| AT28C256E-25DM/883-815 | Microchip Technology Inc | 250NS, CERDIP, 883C; LEV B COMPLIANT, CERDIP, Projected EOL: 2041-09-30 RoHS : Compliant |
| 0 | ||
AT28C256E-15UM/883-815![]() | Microchip Technology Inc | 150NS, PGA, 883C; LEV B COMPLIANT, CPGA, Projected EOL: 2045-12-22 RoHS : Compliant |
| 0 | ||
AT28C256E-25UM/883-815![]() | Microchip Technology Inc | 250NS, PGA, 883C; LEV B COMPLIANT, CPGA, Projected EOL: 2045-12-22 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | AD8381JST![]() | Analog Devices Inc | Display Drivers and Controller LCD 48-QFP Tray RoHS : Not Compliant |
| 2,172 | |
DP83816AVNG/NOPB![]() | Texas Instruments | IC Ethernet Controller PCI IEEE 802.3, 10/100 Base-T/TX PHY 3V - 3.6V 144-QFP Tray RoHS : Compliant |
| 269 | ||
DP83815DUJB/NOPB![]() | Texas Instruments | IC Serializer CMOS, TTL LVDS 4.76Gbps 3V - 3.6V 100-QFP Tray RoHS : Compliant |
| 229 | ||
ADS8381IPFBT![]() | Texas Instruments | ADC, Successive Approximation, 18-Bit, 1 Func, 1 Channel, Parallel, 8 Bits, Parallel, Word Access, CMOS, PQFP48 RoHS : Compliant |
| 5,622 | ||
| DP83815DUJB | Texas Instruments | LAN Controller, 2 Channel(s), 12.5MBps, CMOS, PBGA160 RoHS : Not Compliant |
| 121 | ||
DP83815DVNG/NOPB![]() | Texas Instruments | IC Ethernet Controller PCI IEEE 802.3, 10/100 Base-T/TX PHY 3V - 3.6V 144-QFP Tray RoHS : Compliant |
| 18,420 | ||
DP83816AVNG![]() | Texas Instruments | LAN Controller, 1 Channel(s), 12.5MBps, CMOS, PQFP144 RoHS : Not Compliant |
| 2,820 | ||
CY28381OC![]() | Cypress Semiconductor | Processor Specific Clock Generator, 222.3MHz PDSO48 RoHS : Not Compliant |
| 971 | ||
| DP83810BVUL | National Semiconductor Corporation | 10/100 PCI Ethernet Media Access Controller and Physical Layer RoHS : Not Compliant |
| 1,053 | ||
| DP83815DUJB | National Semiconductor Corporation | LAN Controller, 2 Channel(s), 12.5MBps, CMOS, PBGA160 RoHS : Not Compliant |
| 777 | ||
| DP83815DUJB/NOPB | National Semiconductor Corporation | IC Serializer CMOS, TTL LVDS 4.76Gbps 3V - 3.6V 100-QFP Tray RoHS : Compliant |
| 11,165 | ||
| DP83815DVNG | National Semiconductor Corporation | IC Ethernet Controller PCI IEEE 802.3, 10/100 Base-T/TX PHY 3V - 3.6V 144-QFP Tray RoHS : Not Compliant |
| 213 | ||
| DP83815DVNG/NOPB | National Semiconductor Corporation | IC Ethernet Controller PCI IEEE 802.3, 10/100 Base-T/TX PHY 3V - 3.6V 144-QFP Tray RoHS : Compliant |
| 12,322 | ||
| DP83816AVNG | National Semiconductor Corporation | LAN Controller, 1 Channel(s), 12.5MBps, CMOS, PQFP144 RoHS : Not Compliant |
| 994 | ||
| GW JCLPS2.EM-H1H8-A838-1-65-2-R33 | ams OSRAM Group | LED Lighting White, Warm 2700K 80 2-SMD T/R RoHS : Compliant |
| 20,000 | ||
![]() Sager | 2083810813 | Molex | Molex Pico-Clasp1.0 SRVTETP .76GLHBLK 8Ckt RoHS : Compliant |
| 0 | |
| 2083811209 | Molex | PICO-CLASP1.0 SRVTETP TINLHNAT 12CKT RoHS : Compliant |
| 0 | ||
| 0838112090 | Molex | Molex | 0 | |||
| 3 838 178 | Lumasense Technologies Inc | REPLACEMENT OPTICAL FIBER, RED, 5M, DIN (ATMOSPHERE) SMA (VACUUM), FIBER CU COATED, FIXED KF16 FLANGE (SPECIAL) |
| 0 | ||
| ARC6-08-38.1-LU-LD-2-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
| 3 838 198 | Lumasense Technologies Inc | LL 0,2X 5M DIN AUF LC |
| 0 | ||
| 2083810419 | Molex | PICO-CLASP1.0 SRVTETP TINLHBLK 4CKT RoHS : Compliant |
| 0 | ||
| 2083810707 | Molex | PICO-CLASP1.0 SRVTETP GLHNAT 7CKT RoHS : Compliant |
| 0 | ||
| 2083811517 | Molex | PICO-CLASP1.0 SRVTETP GLHBLK 15CKT RoHS : Compliant |
| 0 | ||
| 1062838103 | Molex | Fiber Optic Cable Assemblies MX QSFP MTP-4LCD SM BRKOUT CBL ASSY 1m RoHS : Compliant | 0 | |||
2688381![]() | Phoenix Contact | Terminal Block Interface Modules AXL DO 8/2-2A RoHS : Compliant |
| 0 | ||
| 2083810915 | Molex | PICO-CLASP1.0 SRVTETP .38GLHBLK 9CKT RoHS : Compliant |
| 0 | ||
| 1-1971838-1 | TE Connectivity | Headers & Wire Housings 11P RAST 2.5 Tab Hdr Ex-Lock T/H Vrt-slvr RoHS : Compliant | 0 | |||
| 2083810515 | Molex | PICO-CLASP1.0 SRVTETP .38GLHBLK 5CKT RoHS : Compliant |
| 0 | ||
| 2083810803 | Molex | Molex Pico-Clasp1.0 SRVTETP .76GLHNat 8Ckt RoHS : Compliant | 0 | |||
![]() TME | 60838-1 | TE Connectivity | Terminal: flat; 6.3mm; 0.8mm; female; 0.3÷0.9mm2; crimped; straight RoHS : Compliant |
| 3,798 | |
| 008381065 000 100 | RECA | Screw; M10; M10x65; Head: cheese head; hex key; HEX 8mm; steel |
| 0 | ||
| 0083812100000 50 | RECA | Screw; M12; M12x100; Head: cheese head; hex key; HEX 10mm; steel |
| 0 | ||
| 0083812150000 50 | RECA | Screw; M12; M12x150; Head: cheese head; hex key; HEX 10mm; steel |
| 0 | ||
| 008381290 000 50 | RECA | Screw; M12; M12x90; Head: cheese head; hex key; HEX 10mm; steel |
| 0 | ||
| 20838 10 000 200 | RECA | Screw; M8; M8x10; Head: cheese head; hex key; HEX 6mm; steel; none |
| 0 | ||
| 20838 110000 100 | RECA | Screw; M8; M8x110; Head: cheese head; hex key; HEX 6mm; steel; none |
| 0 | ||
| 20838 115000 100 | RECA | Screw; M8; M8x115; Head: cheese head; hex key; HEX 6mm; steel; none |
| 0 | ||
| 208381035 000 100 | RECA | Screw; M10; M10x35; Head: cheese head; hex key; HEX 6mm; steel |
| 0 | ||
| 2083816160000 25 | RECA | Screw; M16; M16x160; Head: cheese head; hex key; HEX 14mm; steel |
| 0 | ||
| 83814 | Delock | Cable; DisplayPort plug,DVI-D (24+1) plug; 4K,UHD 2160p; 2m |
| 0 | ||
| A9N18381 | Schneider Electric | Circuit breaker; 230/400VAC; Inom: 125A; Poles: 1; Charact: D; 10kA RoHS : Compliant |
| 0 | ||
| 00838 120000 100 | RECA | Screw; M8; M8x120; Head: cheese head; hex key; 6mm; steel; none |
| 0 | ||
| 00838 16 000 200 | RECA | Screw; M8; M8x16; Head: cheese head; hex key; HEX 6mm; steel; none |
| 0 | ||
| 008381690 000 50 | RECA | Screw; M16; M16x90; Head: cheese head; hex key; HEX 14mm; steel |
| 0 | ||
![]() Ameya Holding Limited | ADS8381IBPFBT![]() | Texas Instruments | IC ADC 18BIT 580KSPS 48-TQFP RoHS : Compliant | 3,235 | ||
| BD83816EFV-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD83812EFV-ME2 | ROHM Semiconductor | 车载用 带三线串行接口 12ch 串行并行LED驱动器 RoHS : Compliant |
| 100 | ||
| BD8381AEFV-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 20 | ||
![]() ComSIT USA | GWJTLQS1EMK5LXA8381150R33 | OSRAM GmbH | LED Lighting White, Warm 2700K 80 1411 RoHS : Compliant | 100,000 | ||
| GWSBLMA2EMGTHPA838165R18 | OSRAM GmbH | LED Lighting White, Warm 2700K 80 0806 T/R RoHS : Compliant | 30,000 | |||
| AKZ6018381VGREEN | PTR Hartmann GmbH | Electronic Component RoHS : Not Compliant | 200 | |||
| DP83816AVNG | National Semiconductor Corporation | 10/100 MEGA BITS/SEC INTEGRATED PCI ETHERNET MEDIA ACCESS CONTROLLER AND PHYSICAL LAYER (MACPHYTER-II) LAN Controller, 1 Channel(s), 12.5MBps, CMOS, PQFP144 RoHS : Not Compliant | 189 | |||
| DP83815DVNG | National Semiconductor Corporation | 10/100 MEGA BITS/SEC INTEGRATED PCI ETHERNET MEDIA ACCESS CONTROLLER AND PHYSICAL LAYER (MACPHYTER) LAN Controller, 2 Channel(s), 12.5MBps, CMOS, PQFP144 RoHS : Compliant | 60 | |||
![]() PEI Genesis | SM-A-838185-5 | SOURIAU-SUNBANK |
| 0 | ||
| C10-838137-00D | Amphenol Corporation |
| 0 | |||
| 507-3838-1433-600F | Dialight |
| 0 | |||
| 507-5838-1437-630 | Dialight |
| 0 | |||
| 507-5838-1431-630 | Dialight |
| 0 | |||
| SJS838120 | Amphenol PCD |
| 0 | |||
| SM-A-838108-5 | SOURIAU-SUNBANK |
| 0 | |||
| SJS838110 | Amphenol PCD |
| 0 | |||
| S2838-16V-12 | SOURIAU-SUNBANK |
| 0 | |||
| S2838-12V-12 | SOURIAU-SUNBANK |
| 0 | |||
| 838149002L | Ulti-Mate Connector Inc |
| 0 | |||
| SM-A-838108-3 | SOURIAU-SUNBANK |
| 0 | |||
| 838149001L | Ulti-Mate Connector Inc |
| 0 | |||
| 8381.74.2517.35.PA.44.61.P1 | Trafag Sensors and Controls |
| 0 | |||
| S2838-14V-12 | SOURIAU-SUNBANK |
| 0 | |||
![]() Chip 1 Exchange | MAL203838109E3 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 63,000 | ||
| 60838-1 | TE Connectivity | INSTOCK RoHS : Compliant | 15,145 | |||
| 1703838-1 | TE Connectivity | INSTOCK RoHS : Compliant | 5,790 | |||
| 6098-3810 | SUMITOMO ELECTRIC Interconnect Products | INSTOCK | 5,004 | |||
| 7283-8123-40 | INSTOCK | 674 | ||||
| 222204838101- | Vishay Intertechnologies | INSTOCK | 625 | |||
| 222204838101 | INSTOCK | 625 | ||||
| DP83816AVNG | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 400 | |||
| 85838163 | Amphenol FCi | INSTOCK | 319 | |||
| DP83815DUJB | INSTOCK | 211 | ||||
| AKZ 1700/18-3,81-B-GRÜN | PTR Messtechnik GmbH & Co KG | INSTOCK | 183 | |||
| 1B9229A-CC8381G | INSTOCK | 98 | ||||
| DP83815DVNG | INSTOCK | 60 | ||||
| 1D49838-1 | ASC | INSTOCK | 2 | |||
| 238838-1 | INSTOCK | 1 | ||||
![]() Avnet Abacus | 1703838-1 | TE Connectivity | Connector Accessory Mounting Clip AMP HDSCS Series Connectors HDSCS (Alt: 1703838-1) RoHS : Compliant | 4,800 | ||
| 2301838-1 | TE Connectivity | D Sub Connector DB9 Standard Receptacle 9 Contacts DE Solder (Alt: 2301838-1) RoHS : Compliant | 1,530 | |||
| 1703838-1 | TE Connectivity | Connector Accessory Mounting Clip AMP HDSCS Series Connectors HDSCS (Alt: 1703838-1) RoHS : Compliant | 1,200 | |||
| 1708381 | Phoenix Contact | IPC 5 2G762 IPC52G762 (Alt: 1708381) RoHS : Compliant | 450 | |||
| 20838108 | nVent Schroff | PEN20838108 (Alt: 20838108) RoHS : Compliant | 0 | |||
| 20838109 | nVent Schroff | PEN20838109 (Alt: 20838109) RoHS : Compliant | 0 | |||
| 1757838-1 | TE Connectivity | (Alt: 1757838-1) RoHS : Compliant | 0 | |||
| 2083810813 | Molex | (Alt: 2083810813) RoHS : Compliant | 0 | |||
| 1983810000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1983810000) RoHS : Compliant | 0 | |||
| 1838100000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1838100000) RoHS : Compliant | 0 | |||
| 2-1838161-0 | TE Connectivity | AMP218381610 (Alt: 2-1838161-0) RoHS : Compliant | 0 | |||
| 4-1768381-9 | TE Connectivity | LBFGD00161AA4 (Alt: 4-1768381-9) RoHS : Not Compliant | 0 | |||
| MAL204838102E3 | Vishay Intertechnologies | - Tape and Reel (Alt: MAL204838102E3) RoHS : Compliant | 0 | |||
| MAL214838152E3 | Vishay Intertechnologies | 1500uF 63V 16x31 105C 3000h - Tape and Reel (Alt: MAL214838152E3) RoHS : Compliant | 0 | |||
| F1A2-383818-100M | Bel Fuse | - Tape and Reel (Alt: F1A2-383818-100M) RoHS : Compliant | 0 | |||
![]() Avnet Asia | MAL211838109E3 | Vishay Intertechnologies | Electrolytic Capacitor, 10 uF, 63 V, ? 20%, Axial Leaded, 4000 hours @ 125?C, Polar, Axial Leaded (Alt: MAL211838109E3) RoHS : Compliant |
| 0 | |
| 2458838-1 | TE Connectivity | US BAR ASSY, 48V, 600A, BLACK CAGE (Alt: 2458838-1) RoHS : Compliant | 0 | |||
| 10052838-101LF | Amphenol Corporation | Connector, FCI AirMax VS, 96 Contacts, 1.4 mm, Header, Press Fit, 8 Rows (Alt: 10052838-101LF) RoHS : Compliant | 0 | |||
| 1-2385838-1 | TE Connectivity | 62.POS.MIXED REC.HSG (Alt: 1-2385838-1) RoHS : Compliant | 0 | |||
| B39552B8381L210W05 | Qualcomm RFFE Filter Products | RFCB39552B8381L210W05 WIFI 5.5G SAW FILT (Alt: B39552B8381L210W05) RoHS : Compliant | 0 | |||
| GTR686838110W2EU | Amphenol Corporation | AHLGTR686838110W2EU CMIO,SLIMSAS 4X RA T (Alt: GTR686838110W2EU) RoHS : Compliant | 0 | |||
| BD83812EFV-ME2 | ROHM Semiconductor | (Alt: BD83812EFV-ME2) RoHS : Compliant | 0 | |||
| 2552838-1 | TE Connectivity | (Alt: 2552838-1) RoHS : Compliant | 0 | |||
| B39552B8381L210 | Qualcomm RFFE Filter Products | BAW FILTER 5.5 GHZ WI-FI UNII 1-3 (Alt: B39552B8381L210) RoHS : Compliant | 0 | |||
| 2301838-1 | TE Connectivity | D Sub Connector, DB9, Standard, Receptacle, 9 Contacts, DE, Solder (Alt: 2301838-1) RoHS : Compliant | 0 | |||
| 2083811009 | Molex | (Alt: 2083811009) RoHS : Compliant | 0 | |||
| 179838-1 | TE Connectivity | (Alt: 179838-1) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BD83816EFV-ME2 | ROHM Semiconductor | LED Driver DC DC 50 mA 16 Output 125 MHz 40 C to 125 C HTSSOPB24 (Alt: BD83816EFV-ME2) RoHS : Compliant | 0 | ||
AT28C256E-25LM/883-815![]() | Microchip Technology Inc | EEPROM 256 Kbit 32K x 8bit Parallel CLCC32 (Alt: AT28C256E-25LM/883-815) RoHS : Compliant | 0 | |||
| AT28C256E-20DM/883-815 | Microchip Technology Inc | EEPROM Parallel 256Kbit 32K X 8 5V 28Pin CDIP (Alt: AT28C256E-20DM/883-815) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 27.02718.381 | Isheng Electronics | IN STOCK SHIP TODAY |
| 63 | |
| 206838-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 44 | ||
| MKDS1/8-3.81 | Phoenix Contact | IN STOCK SHIP TODAY |
| 26 | ||
| 2222-038-38102 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 15 | ||
| 205838-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
| DP83815DVNG | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6 | ||
| 747838-1 | TE Connectivity | IN STOCK SHIP TODAY | 5 | |||
| 227838-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
![]() EBV Elektronik | 920208381IDT | Microchip Technology Inc | CUSTOM ASIC (Alt: 920208381IDT) RoHS : Compliant | 0 | ||
AT28C256E-15LM/883-815![]() | Microchip Technology Inc | EEPROM Parallel 256Kbit 32K X 8 5V 32Pin CLCC (Alt: AT28C256E-15LM/883-815) RoHS : Not Compliant | 0 | |||
| GWCSSRM1.BM-MPMR-A838-1-700-R18 | ams OSRAM Group | (Alt: Q65113A9533) RoHS : Compliant | 0 | |||
| GWJCLPS2.CM-G9H1-A838-1-65-2-R33 | ams OSRAM Group | LED Chip Warm White 2700K 150mA 2Pin SMD TR (Alt: Q65112A8708) RoHS : Compliant | 0 | |||
| GWJCLPS2.EM-H1H8-A838-1-65-2-R33 | ams OSRAM Group | LED Chip Warm White 2700K 150mA 2Pin SMD TR (Alt: Q65112A8480) RoHS : Compliant | 0 | |||
| GWJDSTS2.CM-GVH2-A838-1-65-2-R33 | ams OSRAM Group | (Alt: Q65112A8884) RoHS : Compliant | 0 | |||
| GWJDSTS2.EM-H3H7-A838-1-65-2-R33 | ams OSRAM Group | (Alt: Q65112A8871) RoHS : Compliant | 0 | |||
| GW CSSRM3.PM-N4N8-A838-1-700-R33 | ams OSRAM Group | (Alt: Q65113A7446) RoHS : Compliant | 0 | |||
![]() ECCO | 205838-1 | TE Connectivity | RoHS : Compliant |
| 14 | |
![]() Flip Electronics | BCM88381CA1KFSBG | Broadcom Limited | Stock, Ship Today |
| 57 | |
![]() Master Electronics | 1838.1502 | Marquardt Switches Inc | Switch Rocker N.O./N.C. SPDT Quick Connect Rocker 6A 250VAC 93.21VA 50000Cycles RoHS : Compliant |
| 30 | |
| CPGI-2-1838161-0-50 | TE Connectivity | Crimp Ring Terminal - Vinyl - 12-10 AWG - Stud 8-10 - 50/Clam RoHS : Compliant |
| 30 | ||
| RFA-8381P | Pan Pacific | ADAPTOR SMA FEMALE TO BNC FEMALE Pan Pacific Part Number: RFA-8381P RoHS : Compliant |
| 20 | ||
| 30838128 | nVent Schroff | Aluminium Front Anodized Rear Passivated Untreated Edges RoHS : Compliant |
| 9 | ||
| 468-38185-001 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| ARC6-08-38.1-LU-LD-2-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
2688381![]() | Phoenix Contact | Axioline F - Digital output module - Digital outputs: 8 - 24 V DC - 2 A - connection method: 2-wire - transmission speed in the local bus: 100 Mbps - degree of protection: IP20 - including bus base module and Axioline F connectors RoHS : Compliant |
| 0 | ||
| 1-2110838-1 | TE Connectivity | Parallel Strap Standard and Sight Hole Butt Splices Kit RoHS : Compliant |
| 0 | ||
| 1757838-1 | TE Connectivity | AMPLIMITE R/A RCPT ASY 109 ZN 1 MOQ Reduction RoHS : Compliant |
| 0 | ||
| IEG11-32838-15-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| HW-11-20-L-S-838-192-002 | Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Through-hole RoHS : Compliant |
| 0 | ||
| RCV-00108381 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| 507-3838-1431-600F | Dialight | 110-125V AC RED SHORT CYLINDRICAL NEON INDICATOR NO INTERNAL RESISTOR RoHS : Not Compliant |
| 0 | ||
| 63838-1 | TE Connectivity | 187 FASTON TAB TPBR MOQ Reduction RoHS : Compliant |
| 0 | ||
| 5-1618381-6 | TE Connectivity | CAP200ADANA=RELAY SPST-NO 48V MOQ Reduction RoHS : Not Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W11838-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG188 Coax In 12 Inch Length., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 12 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 12 inch length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. This SHV to SHV cable is a jack to jack coax assembly, PE3W11838-12, can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3W11838-12 is built with RG188 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 12 inch length. |
| 132 | |
| PE3W11838-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG188 Coax In 100 CM Length., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 100 cm length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 100 cm length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. This SHV to SHV cable is a jack to jack coax assembly, PE3W11838-100CM, can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3W11838-100CM is built with RG188 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 100 cm length. |
| 48 | ||
| PE3W11838-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG188 Coax In 150 CM Length., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 150 cm length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 150 cm length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. This SHV to SHV cable is a jack to jack coax assembly, PE3W11838-150CM, can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3W11838-150CM is built with RG188 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 150 cm length. |
| 32 | ||
| PE3W17838-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: N/A, Length, Max: 12 inches. 2.92mm Male to TNC Female Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly 2.92mm male to TNC female cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack 0 coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to TNC female cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a TNC cable connection on the other. Our a 2.92mm to a TNC N/A cable assembly has male gender on end 1 and female on end 2. PE3W17838-12 can also be known as a 0 2.92mm plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17838-12 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. 2.92mm plug to TNC jack cable assembly PE3W17838-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack N/A formable 2.92mm cable assembly is manufactured with 2.92mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17838-12 can also be used in the other direction and will be TNC female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to TNC cable assembly for quick shipment worldwide. Variations of 2.92mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to TNC RF cable assembly as per your requirements. |
| 21 | ||
| PE3C5838-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 4.3-10 Female to QMA Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.3-10 female to QMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 female to QMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and QMA cable connection on the other. Our low PIM 4.3-10 to QMA cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to QMA cable is a female to male coax assembly, PE3C5838-12, can also be known as a low PIM 4.3-10 jack to QMA plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to QMA plug cable assembly PE3C5838-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5838-12 can also be used in the other direction and will be QMA male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to QMA cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 female to QMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. |
| 5 | ||
| PE3C5838-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 4.3-10 Female to QMA Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.3-10 female to QMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 female to QMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and QMA cable connection on the other. Our low PIM 4.3-10 to QMA cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to QMA cable is a female to male coax assembly, PE3C5838-150CM, can also be known as a low PIM 4.3-10 jack to QMA plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to QMA plug cable assembly PE3C5838-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5838-150CM can also be used in the other direction and will be QMA male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to QMA cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 female to QMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 5 | ||
| PE3C7838-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 7/16 DIN Male to 7/16 DIN Female Bulkhead Low PIM Cable 150 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN bulkhead cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C7838-150CM, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C7838-150CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7838-150CM can also be used in the other direction and will be 7/16 DIN female bulkhead to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN female bulkhead low PIM cable 150 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C8381-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 2.2-5 Male to N Male Low PIM Cable 100 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 male to N male low PIM cable 100 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to N male low PIM cable 100 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and type N cable connection on the other. Our low PIM 2.2-5 to type N cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to type N cable is a male to male coax assembly, PE3C8381-100CM, can also be known as a low PIM 2.2-5 plug to N type plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to type N plug cable assembly PE3C8381-100CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 2.2-5 male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8381-100CM can also be used in the other direction and will be type N male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to N type cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to N male low PIM cable 100 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3C6838-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.4mm Male to SMA Male Cable 18 Inch Length Using PE-P086HF Coax., Radio frequency assembly 2.4mm male to SMA male cable 18 inch length using PE-P086HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to SMA male cable 18 inch length using PE-P086HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and SMA cable connection on the other. Our 2.4mm to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C6838-18 can also be known as a 2.4mm plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to SMA plug cable assembly PE3C6838-18 is built with PE-P086HF which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 2.4mm male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6838-18 can also be used in the other direction and will be SMA male to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to SMA cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to SMA male cable 18 inch length using PE-P086HF coax. |
| 0 | ||
| PE3C8381-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 2.2-5 Male to N Male Low PIM Cable 200 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 male to N male low PIM cable 200 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to N male low PIM cable 200 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and type N cable connection on the other. Our low PIM 2.2-5 to N type cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to type N cable is a male to male coax assembly, PE3C8381-200CM, can also be known as a low PIM 2.2-5 plug to N type plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to type N plug cable assembly PE3C8381-200CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 2.2-5 male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8381-200CM can also be used in the other direction and will be type N male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to N male low PIM cable 200 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3C6838-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to SMA Male Cable 12 Inch Length Using PE-P086HF Coax., Radio frequency assembly 2.4mm male to SMA male cable 12 inch length using PE-P086HF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to SMA male cable 12 inch length using PE-P086HF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and SMA cable connection on the other. Our 2.4mm to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C6838-12 can also be known as a 2.4mm plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to SMA plug cable assembly PE3C6838-12 is built with PE-P086HF which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 2.4mm male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6838-12 can also be used in the other direction and will be SMA male to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to SMA cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to SMA male cable 12 inch length using PE-P086HF coax. |
| 0 | ||
| PE3C8381-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 2.2-5 Male to N Male Low PIM Cable 150 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 male to N male low PIM cable 150 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to N male low PIM cable 150 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and type N cable connection on the other. Our low PIM 2.2-5 to type N cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to N type cable is a male to male coax assembly, PE3C8381-150CM, can also be known as a low PIM 2.2-5 plug to type N plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to type N plug cable assembly PE3C8381-150CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 2.2-5 male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8381-150CM can also be used in the other direction and will be N type male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to N type cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to N male low PIM cable 150 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3C7838-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. 7/16 DIN Male to 7/16 DIN Female Bulkhead Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN bulkhead cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C7838-12, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C7838-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7838-12 can also be used in the other direction and will be 7/16 DIN female bulkhead to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C8381-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 48 inches. 2.2-5 Male to N Male Low PIM Cable 48 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 male to N male low PIM cable 48 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to N male low PIM cable 48 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and N type cable connection on the other. Our low PIM 2.2-5 to type N cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to type N cable is a male to male coax assembly, PE3C8381-48, can also be known as a low PIM 2.2-5 plug to type N plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to N type plug cable assembly PE3C8381-48 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 2.2-5 male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8381-48 can also be used in the other direction and will be type N male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to N male low PIM cable 48 inch length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE3C8381-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. 2.2-5 Male to N Male Low PIM Cable 12 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 2.2-5 male to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and type N cable connection on the other. Our low PIM 2.2-5 to type N cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to N type cable is a male to male coax assembly, PE3C8381-12, can also be known as a low PIM 2.2-5 plug to type N plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to type N plug cable assembly PE3C8381-12 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 2.2-5 cable assembly is manufactured with 2.2-5 to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 2.2-5 male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8381-12 can also be used in the other direction and will be type N male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to type N cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to N male low PIM cable 12 inch length using TFT-402 coax using Times Microwave components. |
| 0 | ||
![]() Vyrian | BD8381AEFV-ME2 | ROHM Semiconductor | LED Driver, 6-Segment, PDSO28 RoHS : Compliant | 15,872 | ||
| 2838160 | Phoenix Contact | Surge Arrestors RoHS : Compliant | 9,972 | |||
| 5962-01-183-8146 | Texas Instruments | Binary Counter, Asynchronous, Up Direction, TTL, CDIP14 RoHS : Not Compliant | 8,496 | |||
| 83810A0KEFBH-A | Broadcom Limited | 8,295 | ||||
| AT28C256F-15DM/883-815 | Microchip Technology Inc | EEPROM, 32KX8, 150ns, Parallel, CMOS, CDIP28 RoHS : Not Compliant | 7,370 | |||
| 1883815 | Phoenix Contact | Barrier Strip Terminal Block, 10A, 1mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,360 | |||
| DP83815DVNG | National Semiconductor Corporation | LAN Controller, 2 Channel(s), 12.5MBps, CMOS, PQFP144 RoHS : Not Compliant | 5,968 | |||
| AD8381-EB | Analog Devices Inc | 5,899 | ||||
| DP83816AVNG/NOPB | National Semiconductor Corporation | LAN Controller, 1 Channel(s), 12.5MBps, CMOS, PQFP144 RoHS : Compliant | 5,516 | |||
ADS8381IBPFBT![]() | Texas Instruments | ADC, Successive Approximation, 18-Bit, 1 Func, 1 Channel, Parallel, 8 Bits, Parallel, Word Access, CMOS, PQFP48 RoHS : Compliant | 5,152 | |||
| 1838381 | Phoenix Contact | Barrier Strip Terminal Block, 20A, 4mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,646 | |||
| 1783818 | Phoenix Contact | Board Connector, 12 Contact(s), Female RoHS : Compliant | 4,407 | |||
| AT28C256-20DM/883-815 | Microchip Technology Inc | EEPROM, 32KX8, 200ns, Parallel, CMOS, CDIP28 RoHS : Not Compliant | 3,666 | |||
| AT28C256-25DM/883-815 | Microchip Technology Inc | EEPROM, 32KX8, 250ns, Parallel, CMOS, CDIP28 RoHS : Not Compliant | 2,458 | |||
| DP83816AVNG-EX/NOPB | National Semiconductor Corporation | LAN Controller, 7 Channel(s), 12.5MBps, CMOS, PQFP144 RoHS : Compliant | 598 | |||
![]() Win Source Electronics | DP83816AVNG/NOPB![]() | Texas Instruments | IC MEDIA ACCESS CTRLR 144-LQFP RoHS : Compliant |
| 7,200 | |
| DP83816AVNG | National Semiconductor Corporation | LAN CONTROLLER, 1 CHANNEL(S) RoHS : Not Compliant |
| 300 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |