| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
8340-G230-R1F4 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | 8340 | Keystone Electronics Corp | LED HOLDER T1 3/4 NYLON NAT |
| 3,092 | |
| 929834-03-03 | 3M Interconnect | CONN HEADER VERT 3POS 2.54MM RoHS : Not Compliant |
| 1,549 | ||
| 76383-404LF | Amphenol Communications Solutions | CONN HEADER R/A 8POS 2.54MM RoHS : Compliant |
| 299 | ||
| M8340109K1002FCD03 | Vishay Dale | RES ARRAY 9 RES 10K OHM 10SIP RoHS : Not Compliant |
| 120 | ||
| 17-834001-003MY | Gruber Industries Inc | Fiber Jumper, SM/Dx, ST/ST, OS2, |
| 94 | ||
| 8340 | Radial Magnet Inc | MAGNET 1.650"D X 0.350"THICK RND |
| 91 | ||
| 10183400 | Lapp Group | H-EE 18 BCM FEMALE INSERT RoHS : Compliant |
| 70 | ||
| B383404S2360 | Eaton Bussmann | MAGNUM B38 SERIES |
| 49 | ||
| 6183401022000 | HARTING Technology Group | BLIND GROMMET Y-JUNCTION BOX |
| 17 | ||
| CE.83401-5N | Elesa SPA | DD52R, MECHANICAL POSITION INDIC |
| 10 | ||
| 1834070000 | Weidmüller Interface GmbH & Co. KG | JUMPER TERM BLK 3POS SCREW RoHS : Compliant |
| 6 | ||
| 8340 | AMPCO USA | Tweezer 5-1/2" OAL |
| 1 | ||
| 8340 | Littelfuse Inc | NUT FACE 3/8-24 CRB |
| 0 | ||
| 8340 | Heyco | HEYCO-FLEX CUTTING TOOL 1/4-1 IN |
| 0 | ||
| 8340 | Abbatron | SPCR 8340 AL |
| 0 | ||
![]() Avnet Americas | 1-2834011-2 | TE Connectivity | Conn PC Board 2 POS 3.5mm 45? Angle Through Hole 6A Tray - Boxed Product (Development Kits) (Alt: 1-2834011-2) RoHS : Compliant |
| 3,142 | |
| M8340109K2872FCD03 | Vishay Intertechnologies | Res Thick Film NET 28.7K Ohm 1% 1.08W ?100ppm/?C BUS Molded 10-Pin SIP Pin Thru-Hole Tube - Rail/Tube (Alt: M8340109K2872FCD03) RoHS : Not Compliant |
| 374 | ||
| M8340106M4700JGD03 | Vishay Intertechnologies | MSM10C-03 470 5% M M8340106M4700JG D03 - Rail/Tube (Alt: M8340106M4700JGD03) RoHS : Not Compliant |
| 191 | ||
| M8340107K1152FGD03 | Vishay Intertechnologies | MSM06A-03 11.5K 1% K M8340107K1152FG D03 - Rail/Tube (Alt: M8340107K1152FGD03) RoHS : Not Compliant |
| 190 | ||
| M8340108K4992FGD03 | Vishay Intertechnologies | - Rail/Tube (Alt: M8340108K4992FGD03) RoHS : Not Compliant |
| 140 | ||
| M8340109K1002FCD03 | Vishay Intertechnologies | - Rail/Tube (Alt: M8340109K1002FCD03) RoHS : Not Compliant |
| 132 | ||
| M8340108K1002GCD03 | Vishay Intertechnologies | Resistor, Network, 10 kOhm, ? 2%, 840 mW, 7 Resistors, Bussed, SIP, PC Pin, Through Hole, Thick Film - Rail/Tube (Alt: M8340108K1002GCD03) RoHS : Not Compliant |
| 119 | ||
| M8340108K1001GCD03 | Vishay Intertechnologies | - Rail/Tube (Alt: M8340108K1001GCD03) RoHS : Not Compliant |
| 119 | ||
| M8340108M2203GCD03 | Vishay Intertechnologies | Res Thick Film NET 220K Ohm 2% 21/25W ?300ppm/?C BUS Molded 8-Pin SIP Pin Thru-Hole Tube - Rail/Tube (Alt: M8340108M2203GCD03) RoHS : Not Compliant |
| 85 | ||
| M8340108K2492FCD03 | Vishay Intertechnologies | Res Thick Film NET 24.9K Ohm 1% 21/25W ?100ppm/?C BUS Molded 8-Pin SIP Pin Thru-Hole Tube - Rail/Tube (Alt: M8340108K2492FCD03) RoHS : Not Compliant |
| 49 | ||
| 929834-05-36 | 3M Interconnect | - Bulk (Alt: 7010399235) RoHS : Not Compliant |
| 44 | ||
| M8340106K2001GGD03 | Vishay Intertechnologies | Resistor, Network, 2 kOhm, ? 2%, 1 W, 5 Resistor, Isolated, SIP, PC Pin, Through Hole, Thick Film - Rail/Tube (Alt: M8340106K2001GGD03) RoHS : Not Compliant |
| 32 | ||
| M8340105M1002JGD03 | Vishay Intertechnologies | MSM08C-03 10K 5% M M8340105M1002JG D03 - Rail/Tube (Alt: M8340105M1002JGD03) RoHS : Not Compliant |
| 31 | ||
| M8340108K3743FGD03 | Vishay Intertechnologies | - Rail/Tube (Alt: M8340108K3743FGD03) RoHS : Not Compliant |
| 10 | ||
| M8340108K1004GGD03 | Vishay Intertechnologies | Res Thick Film NET 1M Ohm 2% 12/25W ?100ppm/?C ISOL Molded 8-Pin SIP Pin Thru-Hole Tube - Rail/Tube (Alt: M8340108K1004GGD03) RoHS : Not Compliant |
| 9 | ||
![]() Newark | 2-2834067-2 | TE Connectivity | CONTACT, SOCKET, 22-18AWG, CRIMP; RoHS : Compliant |
| 13,048 | |
| 1-2834049-3 | TE Connectivity | CONNECTOR, PLUG, POKE-IN, 2POS, 4.5MM; RoHS : Compliant |
| 10,784 | ||
| 1-2834011-2 | TE Connectivity | TERMINAL BLOCK, WIRE-BRD, 2POS, 14AWG; RoHS : Compliant |
| 9,395 | ||
| 1-2834011-5 | TE Connectivity | TB, WIRE TO BRD, 5WAY, 14AWG; RoHS : Compliant |
| 5,029 | ||
| 1-2834011-4 | TE Connectivity | TB, WIRE TO BRD, 1POS, 14AWG; RoHS : Compliant |
| 4,502 | ||
| FN283-4-06 | TE Connectivity | POWER ENTRY MODULE; CONNECTOR MOUNTING:P RoHS : Compliant |
| 88 | ||
| 783407-01 | NI | COUNTER I/P MODULE, NI-9361, 8CH, 32 BIT; RoHS : Compliant |
| 39 | ||
| 152834-01 | NI | TEST CABLE ASSEMBLY, POWER CABLE, 12"; RoHS : Compliant |
| 23 | ||
| 2834010-3 | TE Connectivity | SLIM CONTACT, POKE-IN, 24-20AWG, SMT; RoHS : Compliant |
| 21 | ||
| 2834010-3 | TE Connectivity | SLIM CONTACT, POKE-IN, 24-20AWG, SMT; RoHS : Compliant |
| 21 | ||
| 2883400000 | Weidmüller Interface GmbH & Co. KG | TERMINAL RAIL, CONN HOUSING/TRAFFIC GREY; RoHS : Compliant |
| 20 | ||
| SI83408AFA-KIT | Silicon Laboratories Inc | EVAL BOARD, ISOLATED SMART SWITCH; RoHS : Compliant |
| 2 | ||
| PSG08340 | Pro-Signal | BNC TERMINATOR + CHAIN - 75OHM; RoHS : Compliant |
| 1 | ||
| 308-34010 | HellermannTyton | HEAT SHRINK TUBE, 308-34010; RoHS : Compliant |
| 1 | ||
| FMWCP1083-40 | Fairview Microwave Inc | 40 DB WR-112 WAVEGUIDE CROSSGUIDE COUPLE; RoHS : Not Compliant |
| 1 | ||
![]() RS | 1838.3402 | Marquardt Switches Inc | ROCKER SWITCH, SPDT, ON-OFF-ON, 6A, NON-ILLIMINATED, BLACK, 1830 SERIES |
| 213 | |
| 8340-G110-R1H1-A7H0-20A | E-T-A | CIRCUIT BREAKER MAGNETIC PUSH/PULL DC MED ROUND CONNECTOR 240VAC/80VDC 1P 20A |
| 60 | ||
| 0810834:0002 (ZBF 6 LGS:GERADE ZAHLEN 2-20) | Phoenix Contact | TERMINAL BLOCK MARKER, WHITE, BLACK PRINT, EVEN 2-20, HORIZONTAL, ZB/ZBF SERIES |
| 22 | ||
| 8340-F430-K2M2-A2H0-25A | E-T-A | CIRCUIT BREAKER MAGNETIC BLACK LONG TOGGLE AC 50/60HZ MEDIUM 240VAC/80VDC 3P 25A |
| 20 | ||
| 8340-F130-K3M2-A2H0-10A | E-T-A | CIRCUIT BREAKER MAGNETIC BLK LONG TOGGLE AC60/50HZ MED SCREW 240VAC/80VDC 3P 10A |
| 3 | ||
| 2834091 | RS Pro | PIN HINGE BOLT-ON POLYCARBONATE 1.6X1.6X0.2" (40X40X5MM) FREE SWINGING CLOSE M5 |
| 2 | ||
| 1883406 | RS Pro | P80 GRIT SANDPAPER ROLL ALUMINUM OXIDE ABRASIVE 1 X 2IN PHENOLIC RESIN BOND |
| 2 | ||
| B258B (98083401) | Time Mark Corporation | MONITORING RELAY, 3-PHASE, 8-PIN SOCKET, SPDT 10A, 120 VAC 60HZ, 258 SERIES |
| 2 | ||
| 8340 | Heyco | HEYCO-FLEX LIQUID TIGHT CUTTING TOOL |
| 0 | ||
| 8340 | Littelfuse Inc | NUT FACE 3/8-24 CRB |
| 0 | ||
| 8340 | Keystone Electronics Corp | SPACER; SELF-ALIGING; BI-LEAD; LENGTH .850; NYLON 6/6; FOR LED SIZE T-1-3/4 |
| 0 | ||
| 8340 | Olympic Wire & Cable Corp | MULTICONDUCTOR CABLE,20C,16AWG,7X24,BC, PVC INS, BLACK PVC JKT, TFFN |
| 0 | ||
| 8340 | HH Smith | STANDOFF; ROUND; ALUMINUM; 4-40X1/4" THREAD; 1/4" OD; 4" LENGTH |
| 0 | ||
| 8340 | Keystone Electronics Corp | SPACER, SELF-ALIGING, BI-LEAD, LENGTH .850, NYLON 6/6, FOR LED SIZE T-1-3/4 |
| 0 | ||
| 8340 | Olympic Wire & Cable Corp | MULTICONDUCTOR CABLE, 20C, 16AWG, 7X24, BC, PVC INS, BLACK PVC JKT, TFFN |
| 0 | ||
![]() Microchip Technology Inc | 2283400-R | Microchip Technology Inc | AEC-82885T SINGLE, Projected EOL: 2045-10-24 RoHS : Compliant |
| 0 | |
| EX-4210-EAE-3083-40M0000000 | Microchip Technology Inc | EX-4210-EAE-3083-40M0000000, Projected EOL: 2049-11-17 - Contact for Pricing | 0 | |||
![]() Rochester Electronics | SBRS8340T3G | onsemi | Rectifier Single Schottky 40V 4A SMC 2-LEAD T/R RoHS : Not Compliant |
| 11,731 | |
AD8340ACPZ-REEL7![]() | Analog Devices Inc | RF Modulator and Demodulator Modulator 24-QFN T/R RoHS : Compliant |
| 11,126 | ||
AD8340ACPZ-WP![]() | Analog Devices Inc | RF and Baseband Circuit, Bipolar RoHS : Compliant |
| 9,538 | ||
| MC68340AB16EB1 | Freescale Semiconductor | RISC Microprocessor, 32-Bit, 16.78MHz, CMOS, PQFP144 RoHS : Compliant |
| 3,635 | ||
MC68340CAB16E![]() | Freescale Semiconductor | Microprocessor, 32-Bit, MC68000 Family, 16MHz 144-Pin CQFP Tray RoHS : Compliant |
| 4,215 | ||
MC68340CAG25E![]() | Freescale Semiconductor | Microprocessor, 32-Bit, MC68000 Family, 25MHZ 144LQFP RoHS : Compliant |
| 8 | ||
| MC68340FT25E | Motorola Mobility LLC | Microcontroller, 32-Bit, 25.16MHz, HCMOS, PQFP144 RoHS : Not Compliant |
| 8 | ||
| MC68340PV16VE | Motorola Mobility LLC | Microcontroller, 32-Bit, 16.78MHz, HCMOS, PQFP144 RoHS : Compliant |
| 1,445 | ||
| 5962-9583401Q2A | National Semiconductor Corporation | Line Receiver, 4 Func, 4 Rcvr, CMOS, CQCC20 RoHS : Not Compliant |
| 76 | ||
| 5962-9583401VFA/SD | National Semiconductor Corporation | Dual marked (DS90C032W-QMLV) RoHS : Not Compliant |
| 25 | ||
| 5962L9583401VFA | National Semiconductor Corporation | IC INTERFACE Receiver LVDS 155.5Mbps 4.5V - 5.5V 16-CFP Tube RoHS : Not Compliant |
| 69 | ||
| DP8340N | National Semiconductor Corporation | DP8340 - IBM 3270 Protocol Transmitter/Encoder RoHS : Not Compliant | 2,554 | |||
| LP8340CDTX-5.0/NOPB | National Semiconductor Corporation | Fixed Positive LDO Regulator, 5V, 0.8V Dropout, CMOS, PSSO2 RoHS : Compliant |
| 1,340 | ||
| LP8340ILDX-ADJ/NOPB | National Semiconductor Corporation | IC VOLT REG Adjustable 1 REG 1.25V 1A 6-SON T/R RoHS : Compliant |
| 108,500 | ||
| SI83404AAA-IFR | Skyworks Solutions Inc | Buffer/Inverter Based Peripheral Driver, 4 Driver, 0.88A, CMOS, PDSO32 RoHS : Compliant |
| 1,815 | ||
![]() Sager | 8340 | Littelfuse Inc | Switch Hardware NUT FACE 3/8-24 CRB |
| 0 | |
| 8340 | Keystone Electronics Corp | LED Mounting Hardware .85 T1 3/4 BI-LEAD .197 (5mm) DIA |
| 0 | ||
| 2834079-1 | TE Connectivity | Modular Connectors / Ethernet Connectors 5.08MM TOP ENTRY MSC 2P_GY RoHS : Compliant |
| 0 | ||
| 2834085-4 | TE Connectivity | Modular Connectors / Ethernet Connectors 2.54MM TOP ENTRY MSC 5P_GY RoHS : Compliant | 0 | |||
| 4-2834026-4 | TE Connectivity | Modular Connectors / Ethernet Connectors 2POS 3.5MM TOP ENTRY MSC_BE/GY | 0 | |||
| 7-683403-3 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMBINATION |
| 0 | ||
| 5-2834016-5 | TE Connectivity | Modular Connectors / Ethernet Connectors 5POS 2.54MM SES CONN. RoHS : Compliant | 0 | |||
| 11583405 | TE Connectivity | Wire Labels & Markers | 0 | |||
| 0008340109 | Molex | Molex | 0 | |||
| 5-2834016-6 | TE Connectivity | Modular Connectors / Ethernet Connectors 6POS 2.54MM SES CONN. RoHS : Compliant | 0 | |||
| 8-683403-9 | TE Connectivity | Crimpers / Crimping Tools TOOL | 0 | |||
| 7-683403-4 | TE Connectivity | Crimpers / Crimping Tools ANVIL, COMBINATION ASSY APPLICATOR TOOL | 0 | |||
| B383404S2360 | Eaton Bussmann | Barrier Terminal Blocks MAGNUM B38 SERIES |
| 0 | ||
| CA8340-000 | TE Connectivity | TE Connectivity TXR54SC00-1004AI |
| 0 | ||
| 2834086-3 | TE Connectivity | Modular Connectors / Ethernet Connectors 2.50MM TOP ENTRY MSC 4P_GY RoHS : Compliant |
| 0 | ||
![]() TME | 2834048-2 | TE Connectivity | Connector: wire-wire; plug; Inom: 9A; 600V; PIN: 2; straight; crimped RoHS : Compliant |
| 30,500 | |
| 1-2834055-2 | TE Connectivity | Connector: wire-wire; male; Inom: 9A; 600V; PIN: 3; straight; cables RoHS : Compliant |
| 4,800 | ||
| 4-2834075-3 | TE Connectivity | Connector: wire-wire RoHS : Compliant |
| 3,565 | ||
| 2834048-1 | TE Connectivity | Connector: wire-wire; plug; male; Plating: tinned; PIN: 2; 4.5mm RoHS : Compliant |
| 2,667 | ||
| 3-2834074-2 | TE Connectivity | Connector: wire-wire; plug; male; Inom: 5A; 400V; PIN: 2; IP67; tinned RoHS : Compliant |
| 1,862 | ||
| 2638340000 | Weidmüller Interface GmbH & Co. KG | 2638340000 RoHS : Compliant |
| 294 | ||
| 2478340000 | Weidmüller Interface GmbH & Co. KG | Circuit breaker; 3A; Poles: 3; for DIN rail mounting; mcb489 |
| 92 | ||
| 05004834001 | Wera | Socket: 6-angles; socket spanner,impact; HEX 17mm; 1/2"; long |
| 2 | ||
| 8340 | Keystone Electronics Corp | Spacer sleeve; LED; Øout: 5mm; ØLED: 5mm; L: 21.6mm; natural; UL94V-2 |
| 0 | ||
| 1-2834068-2 | TE Connectivity | Contact; male; copper alloy; tinned; 22AWG÷18AWG; crimped; Inom: 5A RoHS : Compliant |
| 0 | ||
| 01038340 | GSR | Tap; M33; 3.5; L: 180mm; Holder: square,machine; 20mm |
| 0 | ||
| 10048340 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 24; THT; 3A; 250V; 1x24 |
| 0 | ||
| 1761834001 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; OMNIMATE; 13A; 250V; tinned |
| 0 | ||
| 1838340000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; OMNIMATE; 19A; 400V RoHS : Compliant |
| 0 | ||
| 08340600 | GSR | Drill bit-kit; for metal; high speed steel ruled HSS-R; 170pcs. |
| 0 | ||
![]() Ameya Holding Limited | SBRS8340T3G | onsemi | SBRS8340T3G Series 40 V 4 A SMT Schottky Power Rectifier - SMC (DO-214AB) RoHS : Compliant | 7,500 | ||
| SURS8340T3G | onsemi | MURS Series 3 A 400 V 75 ns Automotive Ultrafast Power Rectifier - SMC RoHS : Compliant | 2,600 | |||
| BD18340FV-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
![]() ComSIT USA | SBRD8340T4GVF01 | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 3A, 40V V(RRM), Silicon RoHS : Compliant | 64,180 | ||
| BFC238340223 | Vishay Intertechnologies | AC AND PULSE DOUBLE METALLIZED POLYPROPYLENE FILM CAPACITOR Film Capacitor, Polypropylene, 1400V, 5% +Tol, 5% -Tol, 0.022uF, Through Hole Mount RoHS : Compliant | 29,200 | |||
| SBRS8340T3 | onsemi | SURFACE MOUNT SCHOTTKY POWER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 4A, 40V V(RRM), Silicon RoHS : Not Compliant | 12,980 | |||
| 18340011 | TE Connectivity | CONNECTOR ASSY,PCI,EXTENDED,18 Card Edge Connector, 184 Contact(s), 2 Row(s), Straight, 0.05 inch Pitch, Solder Terminal, Locking, Natural Insulator, Receptacle RoHS : Compliant | 4,320 | |||
| SBRS8340T3G | onsemi | SURFACE MOUNT SCHOTTKY POWER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 4A, 40V V(RRM), Silicon RoHS : Compliant | 2,500 | |||
| LP8340ILDADJNOPB | National Semiconductor Corporation | LOW DROPOUT, LOW IQ, 1 AMP CMOS LINEAR REGULATOR Adjustable Positive LDO Regulator, 1.25V Min, 9V Max, 1V Dropout, CMOS RoHS : Compliant | 930 | |||
| M8340105M1501GCD03 | Vishay Intertechnologies | THICK FILM NETWORK RESISTOR Array/Network Resistor, Bussed, Metal Glaze/thick Film, 1.4W, 1500ohm, 50V, 2% +/-Tol, 300ppm/Cel, Through Hole Mount, 7810 RoHS : Not Compliant | 144 | |||
| LP8340IDT33NOPB | National Semiconductor Corporation | LDO Regulator Pos 3.3V 1A 3-Pin(2+Tab) TO-252 Rail RoHS : Compliant | 26 | |||
| PC68340PV16F | Motorola Semiconductor Products | Electronic Component RoHS : Not Compliant | 10 | |||
| MC68340FE16 | Motorola Semiconductor Products | HIGH-PERFORMANCE 32-BIT INTEGRATED PROCESSOR WITH DIRECT MEMORY ACCESS (DMA) Microcontroller, 32-Bit, 16.78MHz, HCMOS, CQFP144 RoHS : Not Compliant | 8 | |||
| MC68340FE16B | Motorola Semiconductor Products | High Performance Microprocessor Unit RoHS : Not Compliant | 8 | |||
| MC68340FE25B | Motorola Semiconductor Products | Electronic Component RoHS : Not Compliant | 6 | |||
| MC68340FV25E | Motorola Semiconductor Products | Electronic Component RoHS : Not Compliant | 6 | |||
| MC68340RP16C | Motorola Semiconductor Products | INTEGRATED PROCESSOR UNIT Microcontroller, 32-Bit, 16.78MHz, CMOS, PPGA145 RoHS : Not Compliant | 6 | |||
| MC68340PV16CSD | Motorola Semiconductor Products | Electronic Component RoHS : Not Compliant | 4 | |||
![]() PEI Genesis | M12883/40-01S-LC | Amphenol PCD |
| 0 | ||
| M12883/40-16S | Amphenol PCD |
| 0 | |||
| 21-033834-081 | Amphenol Corporation |
| 0 | |||
| M12883/40-08S | Amphenol PCD |
| 0 | |||
| M12883/40-09-LC | Amphenol PCD |
| 0 | |||
| M12883/40-09 | Amphenol PCD |
| 0 | |||
| 378-3402-01-203 | Dialight |
| 0 | |||
| DPC9FN7/9FN70-1834.0 | Amphenol Positronic |
| 0 | |||
| M12883/40-17 | Amphenol PCD |
| 0 | |||
| M12883/40-17-LC | Amphenol PCD |
| 0 | |||
| M24308/3-40 | Amphenol Positronic |
| 0 | |||
| M12883/40-05 | Amphenol PCD |
| 0 | |||
| M12883/40-05-LC | Amphenol PCD |
| 0 | |||
| M12883/40-14 | Amphenol PCD |
| 0 | |||
| M12883/40-22S | Amphenol PCD |
| 0 | |||
![]() Richardson RFPD | SI83404AAA-IFR | Skyworks Solutions Inc | Current Limit SW 4-IN 4-OUT to 0.7A 32-Pin DFN EP RoHS : Compliant |
| 0 | |
| DMF2834-000 | Skyworks Solutions Inc | Diode RF Mixer Schottky 2V 75mW 3-Pin RoHS : Compliant | 0 | |||
| SI83408AFA-IF | Skyworks Solutions Inc | Isolated Smart Limit Switch RoHS : Compliant |
| 0 | ||
| R573883405 | Radiall | RF Switch SP4T 0MHz to 40GHz 50dB RoHS : Not Compliant |
| 0 | ||
| SI83404AAA-IF | Skyworks Solutions Inc | Isolated Smart Limit Switch RoHS : Compliant |
| 0 | ||
| SI83408AFA-KIT | Skyworks Solutions Inc | Si83408AFA Digital Isolator Evaluation Kit RoHS : Compliant | 0 | |||
| SI83401BBA-IFR | Skyworks Solutions Inc | Current Limit SW 1-IN 1-OUT to 2.5A 32-Pin DFN EP RoHS : Compliant |
| 0 | ||
| SI8340XEN1-IF | Skyworks Solutions Inc | SI8340XEN1-IF RoHS : Compliant | 0 | |||
| SI8340XEN1-IFR | Skyworks Solutions Inc | SI8340XEN1-IFR RoHS : Compliant | 0 | |||
| SI83401BCA-IF | Skyworks Solutions Inc | Isolated Smart Switch RoHS : Compliant |
| 0 | ||
| SI88340BD-IS | Skyworks Solutions Inc | Quad Digital Isolators with DC DC Converter RoHS : Compliant |
| 0 | ||
| 510CAAM983400CAGR | Skyworks Solutions Inc | Oscillator XO 0.9834MHz ±100ppmCMOS 52% 3.3V 4-Pin RoHS : Compliant |
| 0 | ||
| R183405007 | Radiall | Square Flange Receptacle Panel Seal RoHS : Compliant | 0 | |||
| R183404007 | Radiall | RF COAX PNL MT CONN |
| 0 | ||
| SI5345A-D08340-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 1-2834011-2 | TE Connectivity | INSTOCK RoHS : Compliant | 189,356 | ||
| 9-2834006-2 | TE Connectivity | INSTOCK RoHS : Compliant | 72,800 | |||
| 2834048-3 | TE Connectivity | INSTOCK RoHS : Compliant | 67,902 | |||
| 2834048-2 | TE Connectivity | INSTOCK RoHS : Compliant | 50,407 | |||
| 2-2834006-1 | TE Connectivity | INSTOCK RoHS : Compliant | 39,000 | |||
| 2834036-1 | TE Connectivity | INSTOCK RoHS : Compliant | 38,350 | |||
| 1-2834049-3 | TE Connectivity | INSTOCK RoHS : Compliant | 37,986 | |||
| 1834017-1 | TE Connectivity | INSTOCK RoHS : Compliant | 10,704 | |||
| 9-2834001-1 | TE Connectivity | INSTOCK RoHS : Compliant | 6,240 | |||
| 9-2834005-1 | TE Connectivity | INSTOCK RoHS : Compliant | 6,210 | |||
| 16834-0001 | Molex | INSTOCK | 4,524 | |||
| 929834-01-06 | 3M | INSTOCK | 518 | |||
| LP8340CDTX.33 | INSTOCK | 32 | ||||
| 929834-01-06 | INSTOCK | 10 | ||||
| M8340109K1501JC | INSTOCK | 3 | ||||
![]() Avnet Abacus | 086262008340846 | Kyocera AVX Components | Conn FFCFPC Connector SKT 8 POS 05mm Solder RA SMD TR (Alt: 086262008340846+) RoHS : Compliant | 16,000 | ||
| 1-2834067-2 | TE Connectivity | Contact F Crimp ST Cable Mount Reel (Alt: 1-2834067-2) RoHS : Compliant | 10,000 | |||
| 086210028340800A+ | Kyocera AVX Components | - Tape and Reel (Alt: 086210028340800A+) RoHS : Compliant | 10,000 | |||
| 1-2834074-2 | TE Connectivity | Conn Housing Wire to Board PL 2 POS 25mm ST Cable Mount Loose (Alt: 1-2834074-2) RoHS : Compliant | 5,760 | |||
| 5069834023 | TE Connectivity | (Alt: 5069834023) RoHS : Compliant | 3,300 | |||
| M80-8883405 | Harwin | Datamate LTek DIL Female Small Bore Crimp Connector gold clip gold shell 1717 contacts (Alt: M80-8883405) RoHS : Compliant | 463 | |||
| M8340109K1002GCD03 | Vishay Intertechnologies | Resistor Network 10 kOhm 2 108 W 9 Resistors Bussed SIP PC Pin Through Hole Thick Film (Alt: M8340109K1002GCD03) RoHS : Not Compliant | 242 | |||
| M8340108K1002GCD03 | Vishay Intertechnologies | Resistor Network 10 kOhm 2 840 mW 7 Resistors Bussed SIP PC Pin Through Hole Thick Film (Alt: M8340108K1002GCD03) RoHS : Not Compliant | 140 | |||
| 7-683403-3 | TE Connectivity | (Alt: 7-683403-3) RoHS : Not Compliant | 0 | |||
| 1888340000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1888340000) RoHS : Compliant | 0 | |||
| 1834070000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1834070000) RoHS : Compliant | 0 | |||
| 8-683403-9 | TE Connectivity | ANVIL COMBINATION (Alt: 8-683403-9) RoHS : Not Compliant | 0 | |||
| 76383-403LF | Amphenol Corporation | Conn Shrouded Header HDR 6 POS 254mm Solder RA ThruHole Bag (Alt: 76383-403LF) RoHS : Compliant | 0 | |||
| M8340104M4702GGD03 | Vishay Intertechnologies | MSM06C03 47K 2 M M8340104M4702GG D03 (Alt: M8340104M4702GGD03) RoHS : Not Compliant | 0 | |||
| M8340105K15R0GGD03 | Vishay Intertechnologies | MSM08C03 15 2 K M8340105K15R0GG D03 (Alt: M8340105K15R0GGD03) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | 1-2834011-2 | TE Connectivity | Conn PC Board 2 POS 3.5mm 45? Angle Through Hole 6A Tray (Alt: 1-2834011-2) RoHS : Compliant |
| 1,701 | |
| M8340109K1002FCD03 | Vishay Intertechnologies | (Alt: M8340109K1002FCD03) RoHS : Not Compliant | 0 | |||
| 1-2834068-2 | TE Connectivity | Contact M Crimp ST Cable Mount Reel (Alt: 1-2834068-2) RoHS : Compliant | 0 | |||
| 10200834-001LF | Amphenol Corporation | (Alt: 10200834-001LF) RoHS : Compliant | 0 | |||
| 5017834009 | Molex | (Alt: 5017834009) RoHS : Compliant | 0 | |||
| M8340109KA006FHD03 | Vishay Intertechnologies | MSM10A-05-1800/3900F 1% K M8340109KA006F (Alt: M8340109KA006FHD03) RoHS : Not Compliant | 0 | |||
| 10166834-000511LF | Amphenol Corporation | FCI10166834-000511LF OCTIS 8 POS SIGNAL (Alt: 10166834-000511LF) RoHS : Compliant | 0 | |||
| M8340109K1000FCD03 | Vishay Intertechnologies | (Alt: M8340109K1000FCD03) RoHS : Compliant | 0 | |||
| 10143483-402E001LF | Amphenol Corporation | (Alt: 10143483-402E001LF) RoHS : Compliant | 0 | |||
| M8340109M4701GCD03 | Vishay Intertechnologies | MSM10A-01 4.7K 2% M M8340109M4701GC D03 (Alt: M8340109M4701GCD03) RoHS : Not Compliant | 0 | |||
| M8340109K4700FCD03 | Vishay Intertechnologies | (Alt: M8340109K4700FCD03) RoHS : Compliant | 0 | |||
| M8340109K1002GCD03 | Vishay Intertechnologies | Resistor, Network, 10 kOhm, ? 2%, 1.08 W, 9 Resistors, Bussed, SIP, PC Pin, Through Hole, Thick Film (Alt: M8340109K1002GCD03) RoHS : Not Compliant | 0 | |||
| 10166834-001011LF | Amphenol Corporation | FCI10166834-001011LF OCTIS 8 POS SIGNAL (Alt: 10166834-001011LF) RoHS : Compliant | 0 | |||
| M8340109K4701FCD03 | Vishay Intertechnologies | (Alt: M8340109K4701FCD03) RoHS : Not Compliant | 0 | |||
| M8340106K4701GCD03 | Vishay Intertechnologies | (Alt: M8340106K4701GCD03) RoHS : Not Compliant | 0 | |||
![]() Avnet Silica | SURS8340T3G | onsemi | Power Rectifier UltraFast Recovery 3 A 400 V (Alt: SURS8340T3G) RoHS : Compliant | 30,000 | ||
| 2283400-R | Microchip Technology Inc | SAS Expander Card 36Port 12VDC Socket Mount (Alt: 2283400-R) RoHS : Compliant | 0 | |||
| SBRS8340T3G | onsemi | Schottky Rectifier 40 V 3 A Single DO214AB SMC 2 Pins 500 mV (Alt: SBRS8340T3G) RoHS : Compliant | 0 | |||
SBRD8340T4G-VF01![]() | onsemi | Schottky Barrier Rectifier 40 V 30 A (Alt: SBRD8340T4G-VF01) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | IND83405 | indiemicro | Automotive Gateway |
| 1 | |
| AMER160-48340Z | Aimtec | RoHS : Compliant |
| 0 | ||
![]() DB Roberts | 8340 | Heyco | HEYCO-FLEX CUTTING TOOL 1/4-1 | 0 | ||
| 8340-832-SS-20 | RAF Electronic Hardware | 0 | ||||
| 48340 | Essentra Components | 0 | ||||
| 85-78-340-16 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | 0 | |||
| 20834074 | Essentra Components | 0 | ||||
| M2183-4007-AMODB=7MM | RAF Electronic Hardware | 0 | ||||
| 8340-832-A | RAF Electronic Hardware | 0 | ||||
| 3BT-P834-00 | Acumnet / Camcar | 632X3/8 PAN TORX SEMS | 0 | |||
| M2183-4007-SS | RAF Electronic Hardware | 0 | ||||
| RIV938-3403 | PennEngineering (PEM) | 0 | ||||
| M2183-4007-SS-0 | RAF Electronic Hardware | 0 | ||||
| 1008340000VR | Essentra Components | 0 | ||||
| 8340-832-A-24 | RAF Electronic Hardware | 0 | ||||
| 20834081 | Essentra Components | 0 | ||||
| 8340-1032-A | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | SC668340VLHR | NXP Semiconductors | SC668340VLHR (Alt: SC668340VLHR) RoHS : Compliant | 306,000 | ||
| SBRS8340T3G | onsemi | Schottky Rectifier 40 V 3 A Single DO214AB SMC 2 Pins 500 mV (Alt: SBRS8340T3G) RoHS : Compliant | 0 | |||
| SURS8340T3G | onsemi | Power Rectifier UltraFast Recovery 3 A 400 V (Alt: SURS8340T3G) RoHS : Compliant | 0 | |||
SBRD8340T4G-VF01![]() | onsemi | Schottky Barrier Rectifier 40 V 30 A (Alt: SBRD8340T4G-VF01) RoHS : Compliant | 0 | |||
| BXHK-DK-6834-0951-S0 | Bridgelux Inc | (Alt: BXHK-DK-6834-0951-S0) RoHS : Compliant | 0 | |||
| BXHK-DK-6834-0951-SH | Bridgelux Inc | (Alt: BXHK-DK-6834-0951-SH) RoHS : Compliant | 0 | |||
| CD8069504283404S RFPP | Intel Corporation | (Alt: 999FW1) RoHS : Compliant | 0 | |||
![]() Flip Electronics | MC68340AG16E | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 40,446 | |
| MC68340AG25E | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 31,271 | ||
| MC68340AB16E | NXP Semiconductors | Stock RoHS : Compliant | 14,256 | |||
| MC68340CAG16E | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 12,834 | ||
| MC68340AB25E | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 11,083 | ||
| MC68340CAG25E | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 7,621 | ||
| MC68340AG16VE | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 2,618 | ||
| MC68340FE16E | NXP Semiconductors | Stock, Ship Today |
| 2,449 | ||
| MC68340FE25E | NXP Semiconductors | Stock | 1,653 | |||
| MC68340FE16VE | NXP Semiconductors | Stock, Ship Today |
| 912 | ||
| MC68340CAB16E | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 845 | ||
| MC68340CFE16E | NXP Semiconductors | Stock | 741 | |||
| MC68340CFE25E | NXP Semiconductors | Stock, Ship Today |
| 741 | ||
| MC68340CAB25E | NXP Semiconductors | Stock RoHS : Compliant | 172 | |||
![]() Maritex | 2-2834074-2 | TE Connectivity | Solid-State Lighting (SSL) Connectors; 2-2834074-2; TE CONNECTIVITY; 5 A; Yes; 2; 2 RoHS : Compliant |
| 13,152 | |
| 1-2834067-2 | TE Connectivity | Solid-State Lighting (SSL) Connectors; 1-2834067-2; TE CONNECTIVITY; 5 A; Yes RoHS : Compliant |
| 10,531 | ||
| 1-2834011-4 | TE Connectivity | Wire-to-Board Terminal Blocks; 1-2834011-4; TE CONNECTIVITY; Yes; Green; 4; 300 V RoHS : Compliant |
| 692 | ||
| SBRS8340T3G | onsemi | Rectifier Diodes & Bridges; SBRS8340T3G; ON SEMICONDUCTOR; 2; 40 V; 2 mA RoHS : Compliant |
| 576 | ||
| 1-2834068-2 | TE Connectivity | Solid-State Lighting (SSL) Connectors; 1-2834068-2; TE CONNECTIVITY; 5 A; Yes; 22 AWG; Wire-to-Wire RoHS : Compliant |
| 23 | ||
| 2834006-2 | TE Connectivity | Solid-State Lighting (SSL) Connectors; 2834006-2; TE CONNECTIVITY; Yes; 6 A; Receptacle; Surface Mount RoHS : Compliant |
| 1 | ||
![]() Master Electronics | 7-683403-3 | TE Connectivity | Anvil - Combination. RoHS : Not Compliant |
| 10 | |
| 74A834073-2003 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 74A834073-2003 RoHS : Compliant |
| 0 | ||
| 2834079-1 | TE Connectivity | 5.08MM TOP ENTRY MSC 2P_GY MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2834085-4 | TE Connectivity | 2.54MM TOP ENTRY MSC 5P_GY MOQ Reduction RoHS : Compliant |
| 0 | ||
| 4-2834026-4 | TE Connectivity | 2POS 3.5MM TOP ENTRY MSC_BE/GY MOQ Reduction RoHS : Compliant |
| 0 | ||
| 5-2834016-5 | TE Connectivity | 2.54mm Side Entry Modular Screwless Connector MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1834070000 | Weidmüller Interface GmbH & Co. KG | Cross-connector when screwed in RoHS : Compliant |
| 0 | ||
| 1838.3402 | Marquardt Switches Inc | Switch Rocker N.O./N.C. SPDT Quick Connect Rocker 6A 250VAC 93.21VA 50000Cycles RoHS : Compliant |
| 0 | ||
| 112288-3401 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 5-2834016-6 | TE Connectivity | 2.54mm Side Entry Modular Screwless Connector MOQ Reduction RoHS : Compliant |
| 0 | ||
| 8-683403-9 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 7-683403-4 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| CA8340-000 | TE Connectivity | TXR54SC00-1004AI MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2834086-3 | TE Connectivity | 2.50MM TOP ENTRY MSC 4P_GY MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2834097-1 | TE Connectivity | 5.0MM SIDE ENTRY MSC 2P_GY MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Neutron USA | FN283-4-06 | Schaffner | AC Power Entry Modules 4A 250VAC 50/60Hz Fast-On RoHS : Compliant |
| 50 | |
| 1838340000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks SL-SMT 5.08HC/15/180G 3.2SN BK BX RoHS : Compliant |
| 50 | ||
| 1683400000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks ZDU 2.5/3AN WS RoHS : Compliant |
| 50 | ||
| 1-2308340-6 | TE Connectivity | D-Sub Backsheels FULL METAL HOODS SIZE1-6 (RAW 180 DEG) RoHS : Compliant |
| 50 | ||
| 1-2308340-9 | TE Connectivity | D-Sub Backshells FULL METAL HOODS SIZE 1-9 RAW 135 DEG RoHS : Compliant |
| 50 | ||
| 8000078340 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks MHS 7S/04-5/03 H RoHS : Compliant |
| 50 | ||
| 1278340000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks B2CF 3.50/24/180LR SN BK BX RoHS : Compliant |
| 50 | ||
| 1834070000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories WQV 50N/3 RoHS : Compliant |
| 34 | ||
| 1834080000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories WQV 50N/4 RoHS : Compliant |
| 17 | ||
| 9834057 | WIKA Instrument LP | Analog Positive Press Gauge Bottom Entry 400psi,Connection Size NPT 1/2 |
| 11 | ||
| 9834049 | WIKA Instrument LP | Wika Instruments 9834049 9834049 Analog Positive Press Gauge Bottom Entry 300psi,Connection Size NPT 1/2 |
| 7 | ||
| 8808340000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories IE-XM-ST/ST RoHS : Compliant |
| 4 | ||
| 2478340000 | Weidmüller Interface GmbH & Co. KG | Circuit Breakers MCB 489 3P C 3A ACDC |
| 1 | ||
| AXG98340 | Axiom Manufacturing | AXIOM 75FT CAT6 SHIELDED CABLE - BLACK |
| 0 | ||
| 3583/40 MC005 | Alpha Wire | Flat Cables 28AWG 40C UNSHLD 100ft SPOOL MULTI |
| 0 | ||
![]() Pasternack Enterprises US | PE3W08340-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. BNC Male to BNC Male Cable 50 cm Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 50 cm using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 50 cm using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-50CM, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-50CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 50 cm using LMR-240-UF coax. |
| 3 | |
| PE3W08340-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. BNC Male to BNC Male Cable 150 cm Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 150 cm using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 150 cm using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-150CM, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-150CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 150 cm using LMR-240-UF coax. |
| 3 | ||
| PE3W08340-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 24 inches. BNC Male to BNC Male Cable 24 Inch Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 24 inch using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 24 inch using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-24, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 24 inch using LMR-240-UF coax. |
| 3 | ||
| PE3W08340-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Cable 12 Inch Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 12 inch using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 12 inch using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-12, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 12 inch using LMR-240-UF coax. |
| 3 | ||
| PE3W08340-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. BNC Male to BNC Male Cable 200 cm Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 200 cm using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 200 cm using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-200CM, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-200CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 200 cm using LMR-240-UF coax. |
| 3 | ||
| PE3W08340-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 18 inches. BNC Male to BNC Male Cable 18 Inch Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 18 inch using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 18 inch using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-18, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-18 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 18 inch using LMR-240-UF coax. |
| 3 | ||
| PE3W08340-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 36 inches. BNC Male to BNC Male Cable 36 Inch Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 36 inch using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 36 inch using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-36, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 36 inch using LMR-240-UF coax. |
| 3 | ||
| PE3W08340-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male to BNC Male Cable 60 Inch Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 60 inch using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 60 inch using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-60, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 60 inch using LMR-240-UF coax. |
| 3 | ||
| PE3W08340-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male to BNC Male Cable 48 Inch Using LMR-240-UF Coax., Radio frequency assembly BNC male to BNC male cable 48 inch using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 48 inch using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W08340-48, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W08340-48 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch using LMR-240-UF coax. |
| 3 | ||
| PE7483-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 2 dB, Input Power, Max (CW): 100 Watts, Body Material: Black Anodized Aluminum Heatsink, Connector-In Series: 4.3-10, Connector-In Gender: Female, Connector-Out Series: 4.3-10, Connector-Out Gender: Female, Max Operating Temperature: 75 deg C, Min Operating Temperature: -40 deg C. Low PIM 40dB Fixed Attenuator 4.3-10 female to 4.3-10 female Black Anodized Aluminum Body to 100 Watts 0.6 GHz to 6 GHz. The PE7483-40 is a low PIM fixed 40 dB attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This low PIM threaded RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Pasternack's PE7483-40 fixed attenuator is available with a typical attenuation accuracy of 2 dB. The max input power rating (CW) of this RF attenuator is 100 Watts. Our low PIM radio frequency attenuator with 4.3-10 connectors is constructed with black anodized aluminum heatsink body material. This passive connectorized radio frequency attenuator has -160 dBc typical passive intermodulation. The connectorized directional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 4.3-10 attenuator has a female gender on side 1 and a 4.3-10 female connector on side 2. Our low PIM RF attenuator is rated for a maximum attenuation value of 40 dB. The Pasternack PE7483-40 attenuator is rated for frequency range between 600 MHz to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The attenuator has a black anodized aluminum heatsink 4.3-10 connector with gold-plated beryllium copper contact. Our fixed RF attenuator PE7483-40 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 40 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PEWCP1083-40 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-112, Flange Size: None, Flange Type : UG Cover, Minimum Frequency: 6.57 GHz, Maximum Frequency: 9.99 GHz, Maximum VSWR: 1.25:1, Coupling: 40 dB. WR-112 Waveguide 40 dB Crossguide Coupler, UG Cover Flange, N Female Coupled Port, 6.57 GHz to 9.99 GHz, Aluminum. The PEWCP1083-40 is a 40 dB WR-112 three port crossguide coupler with intergrated N Female connector for the coupled port. This coupler can be mounted directly into the waveguide signal path, connected via coax to allow signal sampling /monitoring. The coupler has a typical VSWR of 1.1:1 and are made of Aluminum with UG Cover flanges. The PEWCP1083-40 is part of a family of cross guide couplers offered by Pasternack with coupling values ranging from 20 to 50 dB. |
| 1 | ||
| PE3W18340LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMC Plug Cable Using PE-SR405FL Coax with HeatShrink, LF Solder. PE3W18340LF/HS is a SMA male right angle to SMC plug cable using PE-SR405FL coax. This Pasternack SMA male right angle to SMC plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMC for connector 2. SMA right angle to SMC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug SMC cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18340LF/HS SMA male right angle to SMC plug cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3C8340/HS | Pasternack Enterprises | 0 | ||||
| PE3W18340 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMC Plug to SMA Male Right Angle Cable Using PE-SR405FL Coax. PE3W18340 is a SMC plug to SMA male right angle cable using PE-SR405FL coax. This Pasternack SMC plug to SMA male right angle cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm SMA for connector 2. SMC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMC to male SMA right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18340 SMC plug to SMA male right angle cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE7583-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.5:1, Input Power, Max (CW): 200 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 200 Watts Up to 10 GHz. PE7583-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7583-40 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 200 Watts. This attenuator has a maximum VSWR of 1.5:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7583-40 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 40 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7583-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
![]() TE Connectivity | 1-2834049-1 | TE Connectivity | REC MOD, 2P LATCHED POKE-IN WTW CONN.NL Number of Positions: 2 Lighting Product Type: Connector Termination Method to Wire & Cable: Poke-In Connector System: Wire-to-Wire Centerline (Pitch): 4.5 mm Ballast Connector | 2 Connector Poke-In Wire-to-Wire | Part Number: 1-2834049-1 | Internal Number: 1-2834049-1 | 4.5 mm | TE Connectivity RoHS : Compliant |
| 69,982 | |
| 1-2834011-2 | TE Connectivity | 2POS 3.5MM TOP ENTRY SCREWLESS CONN. Number of Positions: 2 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Centerline (Pitch): .138 in Centerline (Pitch): 3.5 mm PCB Terminal Block | 2 Receptacle Wire-to-Board .138" | Part Number: 1-2834011-2 | Internal Number: 1-2834011-2 | .138" | TE Connectivity RoHS : Compliant |
| 51,339 | ||
| 2834076-1 | TE Connectivity | 5.0MM TOP ENTRY MSC 2P_GY Number of Positions: 2 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 2 Receptacle Wire-to-Board .197" | Part Number: 2834076-1 | Internal Number: 2834076-1 | .197" | TE Connectivity RoHS : Compliant |
| 25,595 | ||
| 2834048-2 | TE Connectivity | PLUG, 2P LATCHED POKE-IN WTW CONN.BK Number of Positions: 2 Lighting Product Type: Connector Termination Method to Wire & Cable: Poke-In Connector System: Wire-to-Wire Centerline (Pitch): 4.5 mm Ballast Connector | 2 Connector Poke-In Wire-to-Wire | Part Number: 2834048-2 | Internal Number: 2834048-2 | 4.5 mm | TE Connectivity RoHS : Compliant |
| 20,013 | ||
| 1-2834068-2 | TE Connectivity | PIN CONTACT,MINIATURE WATERPROOF CONN Lighting Product Type: Connector Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Centerline (Pitch): 2.5 mm Sealable: Yes Connector Crimp Wire-to-Wire 2.5 mm | Ballast Connector | Part Number: 1-2834068-2 | Internal Number: 1-2834068-2 | TE Connectivity RoHS : Compliant |
| 16,213 | ||
| 1-2834049-4 | TE Connectivity | REC MOD, 2P LATCHED POKE-IN WTW CONN.RD Number of Positions: 2 Lighting Product Type: Connector Termination Method to Wire & Cable: Poke-In Connector System: Wire-to-Wire Centerline (Pitch): .177 in Ballast Connector | 2 Connector Poke-In Wire-to-Wire | Part Number: 1-2834049-4 | Internal Number: 1-2834049-4 | .177" | TE Connectivity RoHS : Compliant |
| 10,280 | ||
| 2834085-2 | TE Connectivity | 2.54MM TOP ENTRY MSC 3P_GY Number of Positions: 3 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm PCB Terminal Block | 3 Receptacle Wire-to-Board .1" | Part Number: 2834085-2 | Internal Number: 2834085-2 | .1" | TE Connectivity RoHS : Compliant |
| 7,920 | ||
| 2834084-1 | TE Connectivity | 2.50MM TOP ENTRY MSC 2P_GY Number of Positions: 2 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Centerline (Pitch): .098 in Centerline (Pitch): 2.5 mm PCB Terminal Block | 2 Receptacle Wire-to-Board .098" | Part Number: 2834084-1 | Internal Number: 2834084-1 | .098" | TE Connectivity RoHS : Compliant |
| 6,658 | ||
| 5-2834006-2 | TE Connectivity | 2P MRPK _WE/RD Connector System: Wire-to-Board Number of Positions: 2 Centerline (Pitch): 4 mm Connector & Contact Terminates To: Printed Circuit Board Connector Height: .176 in Wire-to-Board 2 4 mm Printed Circuit Board | Poke-In Connector | Part Number: 5-2834006-2 | Internal Number: 5-2834006-2 | TE Connectivity RoHS : Compliant |
| 5,688 | ||
| 2834078-1 | TE Connectivity | 5.0MM TOP ENTRY MSC 2P_GY Number of Positions: 2 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 2 Receptacle Wire-to-Board .197" | Part Number: 2834078-1 | Internal Number: 2834078-1 | .197" | TE Connectivity RoHS : Compliant |
| 5,586 | ||
| 5-2834006-3 | TE Connectivity | 3P MRPK CONN_BK/WE/RD Connector System: Wire-to-Board Centerline (Pitch): 4 mm Connector & Contact Terminates To: Printed Circuit Board Connector Height: .176 in Connector Height: 4.48 mm Wire-to-Board 4 mm Printed Circuit Board .176" | Poke-In Connector | Part Number: 5-2834006-3 | Internal Number: 5-2834006-3 | TE Connectivity RoHS : Compliant |
| 3,410 | ||
| 1-2834019-2 | TE Connectivity | 2POS 3.5MM THTS CONN. Number of Positions: 2 Terminal Block Connector Type: Receptacle Connector System: Wire-to-Board Centerline (Pitch): .138 in Centerline (Pitch): 3.5 mm PCB Terminal Block | 2 Receptacle Wire-to-Board .138" | Part Number: 1-2834019-2 | Internal Number: 1-2834019-2 | .138" | TE Connectivity RoHS : Compliant |
| 202 | ||
| 2483407-2 | TE Connectivity | HDBNC M to M Str 12G 75 Ohm NFC55a 500mm Cable Assembly Type: HDBNC to HDBNC Cable Assembly Length: .5 m Cable Assembly Length: 1.64 ft Cable Color: Black Operating Frequency Range: 12 GHz HDBNC to HDBNC .5 m 1.64 ft Black | Rf Cable Assembly | Part Number: 2483407-2 | Internal Number: 2483407-2 | TE Connectivity RoHS : Compliant |
| 76 | ||
| 1-2308340-3 | TE Connectivity | FULL METAL HOODS SIZE 1-3 (RAW 180 DEG) Connector Backshell Product Style: Shielded Connector Backshell Product Type: Backshell Primary Product Material: Zinc Body Orientation: Straight Compatible With Connector Shell Size: 1 Shielded Backshell Zinc Straight | D-Sub Backshell Size 1 | Part Number: 1-2308340-3 | Internal Number: 1-2308340-3 | TE Connectivity RoHS : Compliant |
| 43 | ||
| 2-2308340-0 | TE Connectivity | FULL METAL HOODS SIZE 1-10 (RAW 135 DEG) Connector Backshell Product Style: Shielded Connector Backshell Product Type: Backshell Primary Product Material: Zinc Body Orientation: Straight Compatible With Connector Shell Size: 1 Shielded Backshell Zinc Straight | D-Sub Backshell Size 1 | Part Number: 2-2308340-0 | Internal Number: 2-2308340-0 | TE Connectivity RoHS : Compliant |
| 5 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |