| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
8327-AL1A-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | 742C083273JP | CTS Corporation | Fixed Network Resistor, 27 kohm, Isolated, 4 Resistors, 0603 [1608 Metric], Concave, ? 5%, 50 V - Tape and Reel (Alt: 742C083273JP) RoHS : Compliant |
| 15,000 | |
| IRF8327STRPBF | Infineon Technologies AG | Trans MOSFET N-CH 30V 14A 6-Pin Direct-FET SQ T/R 4.8k - Tape and Reel (Alt: IRF8327STRPBF) RoHS : Compliant |
| 4,800 | ||
| 178327-2 | TE Connectivity | Conn Power M 16 POS 3.81mm Solder ST Thru-Hole 16 Terminal 1 Port Tube - Rail/Tube (Alt: 178327-2) RoHS : Compliant |
| 4,200 | ||
| G8327A048 | Diodes Incorporated | Crystal Plastic SMD3215 T&R 3K - Tape and Reel (Alt: G8327A048) RoHS : Compliant |
| 0 | ||
| MKP383275140JC02R0 | Vishay Intertechnologies | Power Film Capacitor, Double Metallized PP, Radial Box - 2 Pin, 7500 pF, ? 5%, Through Hole, 500 V - Tape and Reel (Alt: MKP383275140JC02R0) RoHS : Compliant | 0 | |||
| 8-327637-2 | TE Connectivity | - Bulk (Alt: 8-327637-2) RoHS : Compliant | 0 | |||
| S42C083271JP | CTS Corporation | Fixed Network Resistor, 270 ohm, Isolated, 4 Resistors, 0603 [1608 Metric], Concave, ? 5%, 50 V - Tape and Reel (Alt: S42C083271JP) RoHS : Compliant |
| 0 | ||
| S42X083274FP | CTS Corporation | Fixed Network Resistor, 270 kohm, Isolated, 4 Resistors, 0603 [1608 Metric], Convex, ? 1%, 50 V - Tape and Reel (Alt: S42X083274FP) RoHS : Compliant | 0 | |||
| MKP383275200JC02R0 | Vishay Intertechnologies | Power Film Capacitor, Double Metallized PP, Radial Box - 2 Pin, 7500 pF, ? 5%, Through Hole, 700 V - Tape and Reel (Alt: MKP383275200JC02R0) RoHS : Compliant | 0 | |||
| 87832-7430 | Molex | MGRID HDR SHRD SMT/PGSCAP.38AULFT&R 50CK - Bulk (Alt: 0878327430) RoHS : Compliant |
| 0 | ||
| S41C083272GP | CTS Corporation | Fixed Network Resistor, 2.7 kohm, Isolated, 4 Resistors, 0402 [1005 Metric], Concave, ? 2%, 50 V - Tape and Reel (Alt: S41C083272GP) RoHS : Compliant | 0 | |||
| M39003/01-8327H | Vishay Intertechnologies | - Bulk (Alt: M39003/01-8327H) RoHS : Not Compliant |
| 0 | ||
| 120108-8327 | Molex | - Bulk (Alt: 1201088327) RoHS : Not Compliant |
| 0 | ||
| 1983270000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1983270000) RoHS : Compliant | 0 | |||
| 2168327-1 | TE Connectivity | FUSE, CARTRIDGE, FAST-ACTING, CLASS CC - Bulk (Alt: 2168327-1) RoHS : Not Compliant | 0 | |||
![]() Newark | QTP832.76812B20R | QANTEK Technology Corporation | Crystal, 32.768Khz, 12.5Pf, 8.7 X 3.8Mm; |Qantek Technology Corporation QTP832.76812B20R RoHS : Compliant |
| 14,520 | |
| QTP832.76812B20R | QANTEK Technology Corporation | Crystal, 32.768Khz, 12.5Pf, 8.7 X 3.8Mm; |Qantek Technology Corporation QTP832.76812B20R RoHS : Compliant |
| 14,520 | ||
| FDMC8327L | onsemi | Pwr Mosfet, N Channel, 40V, 14A; |Onsemi FDMC8327L RoHS : Compliant |
| 5,958 | ||
| FDMC8327L | onsemi | Pwr Mosfet, N Channel, 40V, 14A; |Onsemi FDMC8327L RoHS : Compliant |
| 5,958 | ||
| R38-32.768-12.5 | Raltron Electronics Corporation | Crystal, 32.768Khz, 12.5Pf/8.3Mm X 3.1Mm; |Raltron R38-32.768-12.5 RoHS : Compliant |
| 1,700 | ||
| RJE1Y62A8327E401 | Amphenol Communications Solutions | Enet Cable, Cat8, Rj45 Plug-Plug, 1.83M; |Amphenol Communications Solutions RJE1Y62A8327E401 RoHS : Compliant |
| 195 | ||
| RP0000383278 | TR Fastenings | Hinged Screw Cap, Pp, M5-M6, Blk; |Tr Fastenings RP0000383278 RoHS : Not Compliant |
| 42 | ||
| MP008327 | SPC Multicomp | Type K Thermocouple; |Multicomp Pro MP008327 RoHS : Compliant |
| 30 | ||
| RP0000383276 | TR Fastenings | Expansion Rivet, Nylon, 24.8Mm, Natural; |Tr Fastenings RP0000383276 RoHS : Not Compliant |
| 10 | ||
| RP0000383279 | TR Fastenings | Expansion Rivet, Nylon, 13.2Mm, Natural; |Tr Fastenings RP0000383279 RoHS : Not Compliant |
| 10 | ||
| PCWND-08327-1953 | L-com Inc | Passive Cwdm, Compact Demux, 8 Channel; |L-Com PCWND-08327-1953 RoHS : Not Compliant |
| 5 | ||
| PCWND-08327-19N3 | L-com Inc | Passive Cwdm, Compact Demux, 8 Channel; |L-Com PCWND-08327-19N3 RoHS : Not Compliant |
| 5 | ||
| PCWND-08327-1943 | L-com Inc | Passive Cwdm, Compact Demux, 8 Channel; |L-Com PCWND-08327-1943 RoHS : Not Compliant |
| 4 | ||
| 8327 | Abbatron | Standoff; |Abbatron Hh Smith 8327 RoHS : Not Compliant |
| 0 | ||
| 8327 | Keystone Electronics Corp | Led Spacer; |Keystone 8327 RoHS : Compliant |
| 0 | ||
![]() RS | OKLPC5569R0-EVB (1883274) | OKdo | E1 DEVELOPMENT BOARD, SRAM 320 KB, DUAL-CORE ARM CORTEX M33, MICROCONTROLLER |
| 81 | |
| 1832798 | Phoenix Contact | DIN RAIL SCREW 3.81MM 16AWG 160V 8A 8 POSITION COMBICON CONTROL SERIES RoHS : Compliant |
| 50 | ||
| 1883276 | RS Pro | DEEP GROOVE BALL BEARING 8 X 22 X 7MM SEALED END CLOSURE C3 PLAIN RACE |
| 34 | ||
| 1883279 | RS Pro | DEEP GROOVE BALL BEARING 10 X 26 X 8MM SEALED END CLOSURE C3 PLAIN RACE |
| 27 | ||
| T18SP6DQ-38327 (38327) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, PNP, 400MM RANGE 10MS RESPONSE TIME, 38327, T18 |
| 18 | ||
| 09140006221 (3983273) | HARTING Technology Group | HAN COAXIAL SERIES FEMALE COAXIAL CONTACT,1 WAY, HAN MODULAR, HAN MULTI DIN 41626 |
| 8 | ||
| 34.81.7.060.9024 (7083279) | FINDER SpA | SOLID STATE PCB/PLUG-IN RELAY, SPST-NO 6A, 60V DC INPUT, 1.524V DC OUTPUT |
| 7 | ||
| 2338327 | RS Pro | M21 SP21 PANEL FRONT NUT MOUNT CONNECTOR FEMALE 2 PIN |
| 5 | ||
| PBAT46UHFMTA (83276) | Banner Engineering Corp | FIBER OPTICS, PLASTIC FIBER, OPPOSED, LENGTH 2M, THREAD, LENS, HIGH FLEX |
| 3 | ||
| 9832713 | WIKA Instrument LP | ANALOG POSITIVE PRESS GAUGE BOTTOM ENTRY 3000PSI, CONNECTION SIZE NPT 1/2 |
| 2 | ||
| 9832721 | WIKA Instrument LP | ANALOG POSITIVE PRESS GAUGE BOTTOM ENTRY 5000PSI, CONNECTION SIZE NPT 1/2 |
| 1 | ||
| 7832772 | RS Pro | INSTRUMENT CABLE 2 WIRES STRANDED BLACK PVC FM2R 7X0.2MM 328FT (100M) |
| 1 | ||
| DSNU-25-150-PPS-A (1908327) | Festo | CYLINDER, STANDARD, DSNU-25-150-PPS-A |
| 1 | ||
| 8327 | Keystone Electronics Corp | SPACER; SELF-ALIGING; BI-LEAD; LENGTH .400; NYLON 6/6; FOR LED SIZE T-1-3/4 |
| 0 | ||
| 8327 | HH Smith | STANDOFF; ROUND; ALUMINUM; 4-40 THREAD; 1/4" OD; 1" LENGTH; FULL THREAD |
| 0 | ||
![]() Bisco Industries | 6235-SS-0832-7 | Amatom Electronic Hardware | 189 | |||
| NAS514P832-7 | NAS MACHINE SCREWS | 162 | ||||
| 8156-SS-0832-7 | Amatom Electronic Hardware | 77 | ||||
| 8780-SS-0832-7 | Amatom Electronic Hardware | 23 | ||||
| 10326-SS-0832-7 | Amatom Electronic Hardware | 21 | ||||
| 8570-SS-0832-7 | Amatom Electronic Hardware | 11 | ||||
| 6282D-SS-0832-7 | Amatom Electronic Hardware | 10 | ||||
| 8517-SS-0832-7 | Amatom Electronic Hardware | 5 | ||||
| 13332-SS-0832-7 | Amatom Electronic Hardware | 4 | ||||
| 6272C-SS-0832-7 | Amatom Electronic Hardware | 4 | ||||
| 10349-SS-0832-7 | Amatom Electronic Hardware | 3 | ||||
| 12742-SS-0832-7 | Amatom Electronic Hardware | 3 | ||||
| 6105-SS-0832-7 | Amatom Electronic Hardware | 2 | ||||
| 10325-SS-0832-7 | Amatom Electronic Hardware | 1 | ||||
| 10227-SS-0832-7 | Amatom Electronic Hardware | 1 | ||||
![]() Rochester Electronics | IRF8327STRPBF | Infineon Technologies AG | Power Field-Effect Transistor, 60A I(D), 30V, 0.0073ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant |
| 822 | |
AD8327ARU-REEL![]() | Analog Devices Inc | Line Driver, 1 Func, 1 Driver, PDSO20 RoHS : Not Compliant |
| 5,000 | ||
AD8327ARUZ![]() | Analog Devices Inc | Line Driver, 1 Func, 1 Driver, PDSO20 RoHS : Compliant |
| 4,022 | ||
AD8327ARU![]() | Analog Devices Inc | Line Driver, 1 Func, 1 Driver, PDSO20 RoHS : Not Compliant |
| 3,633 | ||
ADS8327IPW![]() | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 16-SOP Tube RoHS : Compliant |
| 22 | ||
ADS8327IRSAR![]() | Texas Instruments | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PQCC16 RoHS : Compliant |
| 17,800 | ||
ADS8327IBRSAR![]() | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 16-QFN T/R RoHS : Compliant |
| 8,453 | ||
ADS8327IRSAT![]() | Texas Instruments | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PQCC16 RoHS : Compliant |
| 4,300 | ||
ADS8327IBRSAT![]() | Texas Instruments | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PQCC16 RoHS : Compliant |
| 4,606 | ||
LM8327JGR8/NOPB![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 2.5V 250mA SOT-23-5 T/R RoHS : Compliant |
| 14,000 | ||
LM8327JGR8X/NOPB![]() | Texas Instruments | IC Mobile Communications I²C 1.62V - 1.98V 36-BGA T/R RoHS : Compliant |
| 574,000 | ||
ADS8327IBPW![]() | Texas Instruments | IC Video Decoder I²C 10Bits 1.71V - 1.89V 1.65V - 2V 48-QFP Tray RoHS : Compliant |
| 10,817 | ||
ADS8327IBPWR![]() | Texas Instruments | IC ADC 1 CONV 16Bits SAR SPI 16-SOP T/R RoHS : Compliant |
| 113 | ||
| FDMC8327L | Fairchild Semiconductor Corporation | N-Channel PowerTrench® MOSFET 40V, 14A, 9.7mΩ RoHS : Compliant |
| 410 | ||
| IRF8327STRPBF | International Rectifier | Power Field-Effect Transistor, 60A I(D), 30V, 0.0073ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant |
| 4,538 | ||
![]() Sager | 8327 | Keystone Electronics Corp | LED Mounting Hardware .40 T1 3/4 BI-LEAD .197 (5mm) DIA |
| 0 | |
| CLB-183-27E3N-R-A | Carling Technologies | Circuit Breakers CLB18327E3NRA RoHS : Compliant |
| 0 | ||
| CLB-183-27ENN-B-A | Carling Technologies | Circuit Breakers CLB-183-27ENN-B-A RoHS : Compliant |
| 0 | ||
| CMB-083-27G3N-B-J-XBH1 | Carling Technologies | Circuit Breakers | 0 | |||
| AS568-327FKM | BOYD Laconia | Mounting Hardware | 0 | |||
| 0638008327 | Molex | Crimpers / Crimping Tools UPPER COVER PLATE |
| 0 | ||
| 0638083270 | Molex | Tool Kits & Cases TOOL KIT |
| 0 | ||
| 1108327 | Phoenix Contact | PHT22-SVD-GN/PT10/GN |
| 0 | ||
| 1832701 | Phoenix Contact | Pluggable Terminal Blocks 3 Pos 3.81mm pitch Through Hole Header RoHS : Compliant | 0 | |||
| 2832726 | Phoenix Contact | Managed Ethernet Switches FL SWITCH SF 7 TX/FX RoHS : Compliant | 0 | |||
| 2832771 | Phoenix Contact | Managed Ethernet Switches FL SWITCH SF 8 TX RoHS : Compliant |
| 0 | ||
| 229-4-8327-61 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 83278-B00000200-21 | Honeywell Sensing and Control / Hobbs | Industrial Pressure Sensors PRESSURE SWITCH |
| 0 | ||
| CMB-083-27GNN-B-A/08 | Carling Technologies | Circuit Breakers CMB08327GNNBA08 RoHS : Compliant |
| 0 | ||
| CMB-083-27GNN-W-A | Carling Technologies | Circuit Breakers CMB-083-27GNN-W-A RoHS : Compliant |
| 0 | ||
![]() TME | 87832-7023 | Molex | Connector: PCB-cable/PCB; PIN: 42; straight; Plating: gold-plated |
| 10,000 | |
| 218327-1060 | Molex | Connector: PCB to PCB |
| 600 | ||
| 83273 | HELUKABEL | Wire; LiYCY UL; 6x24AWG; shielded,tinned copper braid; PVC; grey RoHS : Compliant |
| 55 | ||
| BD18327EFV-ME2 | ROHM Semiconductor | IC: driver; boost,buck; HTSSOP20; 1.5A; 6÷18V RoHS : Compliant |
| 35 | ||
| G2RL8327R | OMRON Corporation | Relay: electromagnetic |
| 25 | ||
| A018327 | IDEC Corporation | A018327 |
| 15 | ||
| 8327 | Keystone Electronics Corp | Spacer sleeve; LED; Øout: 5mm; ØLED: 5mm; L: 10.2mm; natural; UL94V-2 |
| 0 | ||
| 83276 | HELUKABEL | Wire; LiYCY UL; 16x24AWG; shielded,tinned copper braid; PVC; grey RoHS : Compliant |
| 0 | ||
| 08-327 | NEO TOOLS | Socket: 12-angles; socket spanner; 38mm; 3/4" |
| 0 | ||
| 1832769 | Phoenix Contact | Connector: pluggable terminal block; male; COMBICON S; 8A; 320V RoHS : Compliant |
| 0 | ||
| 49.7083-27 | Stäubli Electrical Connectors | Laboratory connector: 4mm banana; socket; 1kV; 24A; brown |
| 0 | ||
| 1683270000 | Weidmüller Interface GmbH & Co. KG | Splice terminal: rail; 24A; 800V; clamp; wemid; L: 38.5mm; 0.5÷4mm2 RoHS : Compliant |
| 0 | ||
| 83273 | Delock | Cable; FireWire 6pin plug,both sides; 0.5m; black; Øcable: 6mm |
| 0 | ||
| 1832785 | Phoenix Contact | Connector: pluggable terminal block; male; COMBICON S; 8A; 320V RoHS : Compliant |
| 0 | ||
| 83278 | HELUKABEL | Wire; LiYCY UL; 24x24AWG; shielded,tinned copper braid; PVC; grey RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | BD18327EFV-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 10 | |
![]() ComSIT USA | TC3832768KHZ | auris GmbH | TUNING FORK CRYSTAL Parallel - Fundamental Quartz Crystal, 0.032768MHz Nom RoHS : Not Compliant | 37,750 | ||
| M820832768KHZ20PPM | PETERMANN-TECHNIK GmbH | SMD WATCH CRYSTAL Parallel - Fundamental Quartz Crystal, 0.032768MHz Nom RoHS : Compliant | 17,000 | |||
| HD64F38327HV | Renesas Electronics Corporation | IC MCU H8/300L 8Bit 1 Core FLASH 60kB (60k x 8) 8MHz 80-QFP Tray RoHS : Not Compliant | 22 | |||
![]() Interstate Connecting Components | 8327 | Keystone Electronics Corp | LED SPACER |
| 75 | |
| 178327-5 | TE Connectivity | DYNAMIC D/ROW HDR 16P V ASSY RoHS : Compliant |
| 9 | ||
| 12934383-2727 | Glenair Inc | D8 - CONNECTOR, ACCESS | 5 | |||
| EK8327-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55PC0812-2-0-G110 | 0 | |||
| 049883-2762 | ITT Interconnect Solutions | CV6E36A96S-C22 | 0 | |||
| RJE581883276N | Amphenol Commercial | 8P8C, THR, RA, CAT5E, SHIELD, | 0 | |||
| ZPF000000000118327 | TE Connectivity | MALE INSERT 19POLES | 0 | |||
| M24308/8-327F | Amphenol Positronic | D-SUB PLUG 37 #20 PIN CRIMP |
| 0 | ||
| 7-2150832-7 | TE Connectivity | OC-110SP150O-CRIMPTOOLINGKIT |
| 0 | ||
| 10-522958-327 | Amphenol Aerospace | 0 | ||||
| 10-522958-327 | Amphenol Industrial Operations | 0 | ||||
| M24308/3-27 | Amphenol Positronic | D-SUB PLUG 50 #20 PIN SOLDER |
| 0 | ||
| RJE591883271 | Amphenol Commercial | 8P8C, RA, CAT6, SHIELD, STANDA | 0 | |||
| 2448327-2 | TE Connectivity | SRK MULTI RoHS : Compliant | 0 | |||
| 7-2151832-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-044F0 |
| 0 | ||
![]() NexGen Digital | 9398327 | General Motors Corporation | 123,100 | |||
| DT-38-32.768KHZ | KDS Daishinku Corp | 2,560 | ||||
![]() PEI Genesis | GTC08-32-7PZ-025-B30 | Amphenol Corporation |
| 0 | ||
| GTC08-32-7PZ-B30 | Amphenol Corporation |
| 0 | |||
| GTC08-32-7PX-023 | Amphenol Corporation |
| 0 | |||
| GTC08-32-7PY-023-B30 | Amphenol Corporation |
| 0 | |||
| GTC08-32-7PY-023-B30-LC | Amphenol Corporation |
| 0 | |||
| 12934383-2722 | SOURIAU-SUNBANK |
| 0 | |||
| GTC08-32-7PW-025 | Amphenol Corporation |
| 0 | |||
| 12983275 | SOURIAU-SUNBANK |
| 0 | |||
| C5278327-3 | SOURIAU-SUNBANK |
| 0 | |||
| GTC08-32-7PY-025-LC | Amphenol Corporation |
| 0 | |||
| GTS08-32-7PY-025 | Amphenol Corporation |
| 0 | |||
| C5278327-17 | SOURIAU-SUNBANK |
| 0 | |||
| GTC08-32-7PW-B30-LC | Amphenol Corporation |
| 0 | |||
| GTC08-32-7P | Amphenol Corporation |
| 0 | |||
| GTC08-32-7P-023-LC | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 178327-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 63,970 | |
| 1832785-1 | TE Connectivity | Connectors |
| 1,094 | ||
| 8-327717-1 | TE Connectivity | PIDG SPD 22-16 COMM 22-18MIL 4 RoHS : Compliant |
| 660 | ||
| 178327-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 602 | ||
| 83278-B00000200-21 | Honeywell Sensing and Control | Legacy Pressure Switches |
| 360 | ||
| EK8327-000 | TE Connectivity | MOLDED PART EK8327-000 |
| 198 | ||
| 1-282832-7 | TE Connectivity | Terminal Blocks RoHS : Compliant |
| 40 | ||
| D83276-000 | TE Connectivity | adapters RoHS : Compliant |
| 35 | ||
| 83272-B00300030-25 | Honeywell Sensing and Control | Switch |
| 33 | ||
| 10-562832-7S | Amphenol Corporation | CONNECTOR |
| 24 | ||
| 10-214832-7P | Amphenol Corporation | CONNECTOR |
| 19 | ||
| 83271-00000040-04 | Honeywell Sensing and Control | Switch |
| 13 | ||
| 6-747832-7 | TE Connectivity | D-Sub Connectors RoHS : Not Compliant |
| 11 | ||
| 83276-B00000350-01 | Honeywell Sensing and Control | Switch |
| 5 | ||
| M80-4000000F2-08-327-00-000 | Harwin | Datamate Mix-Tek Female Crimp Connector, RoHS : Compliant |
| 1 | ||
![]() Richardson RFPD | 742C083270JP | CTS Corporation | Res Thick Film Array 27 Ohm 5% 0.25W(1/4W) ±200ppm RoHS : Compliant |
| 0 | |
| 019832-72 | Wakefield-Vette | EXTRUDED HEAT SINK RoHS : Compliant | 0 | |||
| LFSPXO083276REEL | IQD Frequency Products | Surface Mount Crystal Oscillator RoHS : Compliant | 0 | |||
| 741C083271JP | CTS Corporation | Res Thick Film Array 270 Ohm 5% 0.25W(1/4W) ±200pp RoHS : Compliant |
| 0 | ||
| R433832700 | Radiall | RFDIRECTIONAL COUPLR RoHS : Compliant | 0 | |||
| SI5341B-D08327-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| SI5341B-D08327-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| 742C083271JP | CTS Corporation | Res Thick Film Array 270 Ohm 5% 0.25W(1/4W) ±200pp RoHS : Compliant |
| 0 | ||
| 5832-7501-000 | Radiall | Between Series Adapt RoHS : Not Compliant | 0 | |||
| 742C08327R4FP | CTS Corporation | 742C08327R4FP RoHS : Not Compliant | 0 | |||
![]() Chip 1 Exchange | 178327-2 | TE Connectivity | INSTOCK RoHS : Compliant | 130,107 | ||
| 87832-7023 | Molex | INSTOCK | 13,000 | |||
| CFS308-32.768KDZF-UB | INSTOCK | 8,913 | ||||
| 742C083272JP | CTS Corporation | INSTOCK RoHS : Compliant | 7,777 | |||
| R38-32.768-6-EXT-5PPM | Raltron Electronics Corporation | INSTOCK | 6,227 | |||
| FDMC8327L | onsemi | INSTOCK RoHS : Compliant | 3,906 | |||
| R38-32.768-12.5 | Raltron Electronics Corporation | INSTOCK RoHS : Compliant | 1,826 | |||
| QTF-M28 32.768KHZ | INSTOCK | 1,716 | ||||
| NC38-32.768KHZ | Fox Electronics | INSTOCK RoHS : Not Compliant | 192 | |||
| 902832735 | INSTOCK | 184 | ||||
| 10683270 | Thomson Components-Mostek Corp | INSTOCK | 118 | |||
| 10683270- | THOM | INSTOCK | 81 | |||
![]() Avnet Abacus | 1832769 | Phoenix Contact | MCVK 15 5G381 MCVK155G381 (Alt: 1832769) RoHS : Compliant | 0 | ||
| 1832797 | Phoenix Contact | GMSTB 25 3ST762 BK H1L GMSTB253ST762BKH1L (Alt: 1832797) RoHS : Compliant | 0 | |||
| 583274-3 | TE Connectivity | Connector Accessories Keying Plug GlassFilled Polyester (Alt: 583274-3) RoHS : Compliant | 0 | |||
| 8-327637-2 | TE Connectivity | (Alt: 8-327637-2) RoHS : Compliant | 0 | |||
| 1683270000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1683270000) RoHS : Compliant | 0 | |||
| 8-327635-1 | TE Connectivity | (Alt: 8-327635-1) RoHS : Compliant | 0 | |||
| 1883270000 | Weidmüller Interface GmbH & Co. KG | Conn Shrouded Header HDR 64 POS 5mm Solder ST ThruHole Box (Alt: 1883270000) RoHS : Compliant | 0 | |||
| S42C083271JP | CTS Corporation | Fixed Network Resistor 270 ohm Isolated 4 Resistors 0603 1608 Metric Concave 5 50 V - Tape and Reel (Alt: S42C083271JP) RoHS : Compliant | 0 | |||
| 744C083273JP | CTS Corporation | Fixed Network Resistor 27 kohm Isolated 4 Resistors 1206 3216 Metric Concave 5 200 V - Tape and Reel (Alt: 744C083273JP) RoHS : Compliant | 0 | |||
| 741C083270JP | CTS Corporation | Fixed Network Resistor 27 ohm Isolated 4 Resistors 0402 1005 Metric Concave 5 25 V - Tape and Reel (Alt: 741C083270JP) RoHS : Compliant | 0 | |||
| 743C083274JP | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 4 Resistors 0805 2012 Metric Concave 5 100 V - Tape and Reel (Alt: 743C083274JP) RoHS : Compliant | 0 | |||
| S42C083272JP | CTS Corporation | Fixed Network Resistor 27 kohm Isolated 4 Resistors 0603 1608 Metric Concave 5 50 V - Tape and Reel (Alt: S42C083272JP) RoHS : Compliant | 0 | |||
| CRA12E08327K0JTR | Vishay Intertechnologies | Resistor Array 27 kOhm 5 500 mW 4 Resistors Isolated 2012 5030 Metric Convex (Alt: CRA12E08327K0JTR) RoHS : Compliant | 0 | |||
| RV-8263-C8 32.768KHZ-20PPM-TA-QC | Micro Crystal AG | RV8263C8TAQC020MC01 (Alt: RV-8263-C8-TA-QC-020-MC01) RoHS : Compliant | 0 | |||
| RV-8063-C8-32.768-20PPM-TA-QC-MC01 | Micro Crystal AG | RV8063C8 RealTime Clock SPI Bus 20ppm 25C 40 to 85C SMD 20 x 12 x 07 (Alt: RV-8063-C8-32.768-20PPM-TA-QC-MC01) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2183271060 | Molex | (Alt: 2183271060) RoHS : Compliant | 200 | ||
| 10138327-10130ALF | Amphenol Corporation | PCI EXPRESS TH-10138327-10130ALF (Alt: 10138327-10130ALF) RoHS : Compliant | 0 | |||
| 742C083274JP | CTS Corporation | Fixed Network Resistor, 270 kohm, Isolated, 4 Resistors, 0603 [1608 Metric], Concave, ? 5%, 50 V (Alt: 742C083274JP) RoHS : Compliant | 0 | |||
| BD18327EFV-ME2 | ROHM Semiconductor | (Alt: BD18327EFV-ME2) RoHS : Compliant | 0 | |||
| Z34081832709J6DC04 | Vishay Intertechnologies | (Alt: Z34081832709J6DC04) RoHS : Compliant | 0 | |||
| G8327A044 | Diodes Incorporated | (Alt: G8327A044) RoHS : Compliant | 0 | |||
| 10138327-10132ALF | Amphenol Corporation | PCI EXPRESS TH-10138327-10132ALF (Alt: 10138327-10132ALF) RoHS : Compliant | 0 | |||
| G8327A038 | Diodes Incorporated | Crystal, Tuning Fork, 32.768 kHz, SMD, 3.2mm x 1.5mm x 0.9mm, G8 (Alt: G8327A038) RoHS : Compliant | 0 | |||
| Z34081832700J6EC10 | Vishay Intertechnologies | (Alt: Z34081832700J6EC10) RoHS : Compliant | 0 | |||
| FDMC8327L | onsemi | N-Channel PowerTrench? MOSFET 40V, 14A, 9.7mO (Alt: FDMC8327L) RoHS : Compliant | 0 | |||
![]() Avnet Silica | G8327A048 | Diodes Incorporated | Crystal Plastic SMD3215 TR 3K (Alt: G8327A048) RoHS : Compliant | 0 | ||
| G8327A050 | Diodes Incorporated | Tuning Fork Quartz Crystals G8 Series Quartz Crystal 32768 kHz SMD Crystal (Alt: G8327A050) RoHS : Compliant | 0 | |||
| G8327A045 | Diodes Incorporated | Crystal Tuning Fork 32768 kHz SMD 32mm x 15mm x 09mm G8 (Alt: G8327A045) RoHS : Compliant | 0 | |||
| G8327A058 | Diodes Incorporated | Crystal 32768KHz 125pF 2Pin SMD TR (Alt: G8327A058) RoHS : Compliant | 0 | |||
| G8327A060 | Diodes Incorporated | Crystal Plastic SMD3215 TR 3K (Alt: G8327A060) RoHS : Compliant | 0 | |||
| G8327A049 | Diodes Incorporated | G8 Series Quartz Crystal 32768 kHz SMD Crystal 32 x 15mm (Alt: G8327A049) RoHS : Compliant | 0 | |||
| G8327A039 | Diodes Incorporated | (Alt: G8327A039) RoHS : Compliant | 0 | |||
| G8327A047 | Diodes Incorporated | Crystal 32678kHz 2Pin Surface Mount TR (Alt: G8327A047) RoHS : Compliant | 0 | |||
| G8327A046 | Diodes Incorporated | Crystal Tuning Fork 32768 kHz SMD 32mm x 15mm x 09mm G8 (Alt: G8327A046) RoHS : Compliant | 0 | |||
| G8327A059 | Diodes Incorporated | Crystal Tuning Fork 32768 kHz SMD 32mm x 15mm x 09mm 18 pF G8 (Alt: G8327A059) RoHS : Compliant | 0 | |||
| G8327A038 | Diodes Incorporated | Crystal Tuning Fork 32768 kHz SMD 32mm x 15mm x 09mm G8 (Alt: G8327A038) RoHS : Compliant | 0 | |||
| FDMC8327L | onsemi | NChannel PowerTrench MOSFET 40V 14A 97mO (Alt: FDMC8327L) RoHS : Compliant | 0 | |||
| C18327_BRIANNA-7X1-W | LEDIL | LINEAR LENSRECTANG7 POS2800 X 360MM (Alt: C18327_BRIANNA-7X1-W) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 742C083270J | CTS Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12,250 | |
| 742C083270JTR | CTS Corporation | IN STOCK SHIP TODAY |
| 7,000 | ||
| 2322-180-83279 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 4,500 | ||
| 742C083271J | CTS Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,450 | ||
| 743C083270JTR | CTS Corporation | IN STOCK SHIP TODAY |
| 3,900 | ||
| NC38-327 | Fox Electronics | IN STOCK SHIP TODAY |
| 400 | ||
| CRA06S08327R0FTA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant | 300 | |||
| NC38-32.768KHZ | CTS Valpey Corporation | IN STOCK SHIP TODAY | 134 | |||
| SCP8-32.768KHZ-TR | Suntsu Electronics Inc | IN STOCK SHIP TODAY | 22 | |||
| WC-38-32.768KHZ | RXD Technologies | IN STOCK SHIP TODAY |
| 10 | ||
![]() DB Roberts | PFC2P-832-72 | PennEngineering (PEM) | PF,ASSY,SS; PHILLIPS DRIVE 8-32THREAD |
| 3,895 | |
| PFC2-832-72 | PennEngineering (PEM) | Available in steel or stainless steel.Meets operator access area requirements similar to UL 508.Tool or finger operation.Most sizes available in three screw lengths. |
| 3,003 | ||
| 10352-SS-0832-7 | Amatom Electronic Hardware |
| 236 | |||
| MS27183-27 | Military Specifications |
| 3 | |||
| 3BT-P8327-00 | Acumnet / Camcar | 0 | ||||
| 8327-1024-A-22 | RAF Electronic Hardware | 0 | ||||
| 8327-832-A-24 | RAF Electronic Hardware | 0 | ||||
| 20832711 | Essentra Components | 0 | ||||
| 20832728 | Essentra Components | 0 | ||||
| 20832773 | Essentra Components | 0 | ||||
| PFC4-832-72 | PennEngineering (PEM) | PANEL FASTENER,ASSY,STAINLESS 8-32 THREAD | 0 | |||
| PFS2-832-72CN | PennEngineering (PEM) | PANEL FASTENER,ASSY,STEEL 8-32THREAD | 0 | |||
| 20832735 | Essentra Components | 0 | ||||
| 20832780 | Essentra Components | 0 | ||||
| 48327 | Essentra Components | 0 | ||||
![]() EBV Elektronik | FDMC8327L | onsemi | NChannel PowerTrench MOSFET 40V 14A 97mO (Alt: FDMC8327L) RoHS : Compliant | 0 | ||
| C18327_BRIANNA-7X1-W | LEDIL | LINEAR LENSRECTANG7 POS2800 X 360MM (Alt: C18327_BRIANNA-7X1-W) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 12934383-2727 | SOURIAU-SUNBANK | Backshells & Ac |
| 73 | |
| 38327-2-B | SCS | Magnet Wire | 37 | |||
| MS25041-8-327 | Dialight | Switches | 1 | |||
| 83278-B00000200-21 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 83276-B00000400-01 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 83276-B00000250-05 | Honeywell Sensing and Control | Switches |
| 0 | ||
![]() Maritex | SJK-6K8-32.768-12.5-20-40-B | SJK | Quartz crystal; 32.768kHz; 20ppm; 12.5pF |
| 686 | |
| 178327-3 | TE Connectivity | Male Pin Headers; 178327-3; TE CONNECTIVITY; 2; Gold, Tin; 16; Vertical RoHS : Compliant |
| 475 | ||
![]() Master Electronics | CLB-183-27E3N-R-A | Carling Technologies | CLB18327E3NRA RoHS : Compliant |
| 0 | |
| 000083270 | ITT Interconnect Solutions | Backshell without provision accessories wire sealing grommet compression ring RoHS : Not Compliant |
| 0 | ||
| CLB-183-27ENN-B-A | Carling Technologies | RoHS : Compliant |
| 0 | ||
| 278327N001 | TE Connectivity | 5416-10-340712 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 2832771 | Phoenix Contact | Ethernet Switch - 8 TP RJ45 ports - automatic detection of data transmission speed of 10 or 100 Mbps (RJ45) - autocrossing function RoHS : Compliant |
| 0 | ||
| 83278-B00000200-21 | Honeywell Sensing and Control | Industrial Pressure Sensors Transportation Pressure Switches RoHS : Compliant |
| 0 | ||
| CMB-083-27GNN-B-A/08 | Carling Technologies | CMB08327GNNBA08 RoHS : Compliant |
| 0 | ||
| CMB-083-27GNN-W-A | Carling Technologies | CMB08327GNNWA RoHS : Compliant |
| 0 | ||
| EK8327-000 | TE Connectivity | 55PC0812-2-0-G110 RoHS : Compliant |
| 0 | ||
| 049883-2762 | ITT Interconnect Solutions | CV6E36A96S-C22; Pv/cv/kpd; Circular RoHS : Compliant |
| 0 | ||
| CLB-083-27J3A-B-A | Carling Technologies | CLB08327J3ABA RoHS : Compliant |
| 0 | ||
| CLB-083-27JNN-B-A | Carling Technologies | CLB08327JNNBA RoHS : Compliant |
| 0 | ||
| CLB-083-27E7N-W-A | Carling Technologies | CLB08327E7NWA RoHS : Compliant |
| 0 | ||
| CMB-083-27G3N-B-A | Carling Technologies | CMB08327G3NBA RoHS : Compliant |
| 0 | ||
| 1832769 | Phoenix Contact | DIN rail connector - nominal current: 8 A - rated voltage (III/2): 160 V - nominal cross section: 1.5 mm² - number of positions: 5 - pitch: 3.81 mm - connection method: Screw connection with tension sleeve - color: green - contact surface: Tin - mounting: DIN rail RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1683270000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks ZDU 2.5 GE RoHS : Compliant |
| 47 | |
| 1832769 | Phoenix Contact | Pluggable Terminal Blocks MCVK 1.5/ 5-G-3.81 RoHS : Compliant |
| 39 | ||
| 1308327 | Phoenix Contact | General Purpose Relays REL-FO/LRC-120AC/1X21/MS |
| 33 | ||
| T18SP6DQ-38327 | Banner Engineering Corp | T18SP6DQ-38327 400MM RANGE 10ms RESPONSE TIME; 38327 |
| 18 | ||
| 2832726 | Phoenix Contact | Ethernet Modules FL SWITCH SF 7 TX/FX RoHS : Compliant |
| 0 | ||
| 2832771 | Phoenix Contact | Unmanaged Ethernet Switches FL SWITCH SF 8 TX RoHS : Compliant |
| 0 | ||
| 8327GL3-30ML | MG Chemicals | Thermal Interface Products Non Silicone Liquid Thermal Gel, Cartridge 30ml, Ultra Soft Gel, White |
| 0 | ||
| 9768327 | WIKA Instrument LP | Pressure Gauge 232.53 2.5 100PSI 1/4 B SS |
| 0 | ||
| CFM-A225B-018-327-20 | CUI Inc | DC Fan, Sq120x25 mm, 5 Vdc 0.45A, 1800RPM, 62.8CFM, Tach, 3wire |
| 0 | ||
CFM-A225B-018-327-20![]() | Same Sky | DC Fans dc axial fan, 120 mm square, 25 mm, 5 Vd RoHS : Compliant |
| 0 | ||
| 2908327 | Phoenix Contact | Industrial Relays RIF-0-RPT-M-24DC/21 |
| 0 | ||
| 8327GL6-30ML | MG Chemicals | Thermal Interface Products Non Silicone Liquid Thermal Gel, Cartridge 30ml, Paste like Gel, Gray |
| 0 | ||
| 8327GL5-30ML | MG Chemicals | Thermal Interface Products Non Silicone Liquid Thermal Gel, Cartridge 30ml, High Temp Soft Gel, Gray |
| 0 | ||
| 1832798 | Phoenix Contact | DIN Rail Terminal Blocks MCVK 1.5/ 8-G-3.81 RoHS : Compliant |
| 0 | ||
| 1832756 | Phoenix Contact | DIN Rail Terminal Blocks MCVK 1 5/ 4-G-3 81 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W08327/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. SMA Male to N Male Right Angle Low Loss Cable Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly SMA male to N male right angle low loss cable using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male right angle low loss cable using LMR-400-UF coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle N type cable connection on the other. Our low loss SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W08327/HS can also be known as a low loss SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3W08327/HS is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08327/HS can also be used in the other direction and will be right angle type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle low loss cable using LMR-400-UF coax with heatshrink. | 2,130 | ||
| PE3W08327/HS-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. SMA Male to N Male Right Angle Low Loss Cable 120 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly SMA male to N male right angle low loss cable 120 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male right angle low loss cable 120 inch length using LMR-400-UF coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle N type cable connection on the other. Our low loss SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W08327/HS-120 can also be known as a low loss SMA plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W08327/HS-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08327/HS-120 can also be used in the other direction and will be right angle N type male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle low loss cable 120 inch length using LMR-400-UF coax with heatshrink. |
| 426 | ||
| PE3W08327/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly SMA male to N male right angle low loss cable 36 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male right angle low loss cable 36 inch length using LMR-400-UF coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle type N cable connection on the other. Our low loss SMA to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3W08327/HS-36 can also be known as a low loss SMA plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W08327/HS-36 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08327/HS-36 can also be used in the other direction and will be right angle N type male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle low loss cable 36 inch length using LMR-400-UF coax with heatshrink. |
| 426 | ||
| PE3W08327/HS-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to N Male Right Angle Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly SMA male to N male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle N type cable connection on the other. Our low loss SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W08327/HS-300 can also be known as a low loss SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W08327/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08327/HS-300 can also be used in the other direction and will be right angle type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink. |
| 426 | ||
| PE3W08327/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly SMA male to N male right angle low loss cable 12 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male right angle low loss cable 12 inch length using LMR-400-UF coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle N type cable connection on the other. Our low loss SMA to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W08327/HS-12 can also be known as a low loss SMA plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W08327/HS-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08327/HS-12 can also be used in the other direction and will be right angle type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle low loss cable 12 inch length using LMR-400-UF coax with heatshrink. |
| 426 | ||
| PE8327 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 2 GHz, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 0.8 dB, Maximum Input Power: 25 Watts, Minimum Isolation: 14 dB. Isolator With 14 dB Isolation From 2 GHz to 6 GHz, 25 Watts And SMA Female. Pasternack RF isolator PE8327 is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF isolator is manufactured with SMA connectors that are female. Our SMA isolator has a minimum frequency of 2 GHz and a maximum frequency of 6 GHz. This SMA coaxial isolator has a minimum isolation of 14 dB and a maximum input power of 25 Watts. PE8327 coaxial SMA isolator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency isolator can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. RoHS : Compliant |
| 4 | ||
| PE3C8327-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-48 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-48 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-48 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-150CM can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-150CM can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-12 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-12 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3C8327-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 36 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-36 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-36 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-50CM can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-50CM can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE38327 | Pasternack Enterprises | 0 | ||||
| PE3C8327-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 200 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 200 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-200CM can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-200CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-200CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-200CM can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8327-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 7/16 DIN male right angle to N male low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male low PIM cable 60 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8327-60 can also be known as a low PIM right angle 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 7/16 DIN low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8327-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C8327-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8327-60 can also be used in the other direction and will be a type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
![]() TE Connectivity | 178327-5 | TE Connectivity | DYNAMIC D/ROW HDR 16P V ASSY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 16 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 178327-5 | Internal Number: 178327-5 | TE Connectivity RoHS : Compliant |
| 3,888 | |
| 8-327717-1 | TE Connectivity | PIDG SPD 22-16 COMM 22-18MIL 4 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .326 – 1.31 mm² Wire Size: 509 – 3260 CMA Stud Size: M2.5 #4 Spade Tongue Terminal 22 – 16 AWG .326 – 1.31 mm² 509 – 3260 CMA | Pidg Spade Tongue Terminal | Part Number: 8-327717-1 | Internal Number: 8-327717-1 | TE Connectivity RoHS : Compliant |
| 1,260 | ||
| 8-327043-1 | TE Connectivity | PG SPD 22-16 COMM 22-18 MIL 6 Spade Terminal Type: Spade Tongue Terminal Wire Size: 22 – 16 AWG Wire Size: .26 – 1.65 mm² Wire Size: 509 – 3260 CMA Stud Size: M3.5 #6 Spade Tongue Terminal 22 – 16 AWG .26 – 1.65 mm² 509 – 3260 CMA | Spade Terminal | Part Number: 8-327043-1 | Internal Number: 8-327043-1 | TE Connectivity RoHS : Compliant |
| 1,179 | ||
| 178327-3 | TE Connectivity | DYNAMIC D/ROW HDR 16P V ASSY PdNi PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 16 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 16 | Header Assembly: Wire-To-Board & 15A & Gold Or Tin Plated | Part Number: 178327-3 | Internal Number: 178327-3 | TE Connectivity RoHS : Compliant |
| 731 | ||
![]() Vyrian | G83270021 | Diodes Incorporated | Parallel - Fundamental Quartz Crystal, 0.032768MHz Nom | 14,935 | ||
| 1832701 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 13,285 | |||
AD8327ARU-REEL![]() | Analog Devices Inc | Line Driver, 1 Func, 1 Driver, PDSO20 RoHS : Not Compliant | 11,005 | |||
AD8327ARUZ-REEL![]() | Analog Devices Inc | Line Driver, 1 Func, 1 Driver, PDSO20 RoHS : Compliant | 10,005 | |||
| 1832769 | Phoenix Contact | Modular Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,803 | |||
| 2832726 | Phoenix Contact | Switches/Accessories RoHS : Compliant | 7,673 | |||
| HMC8327LG | Analog Devices Inc | Down Converter RoHS : Compliant | 6,942 | |||
| 2832771 | Phoenix Contact | Switches/Accessories RoHS : Compliant | 6,358 | |||
ADS8327IBRSARG4![]() | Texas Instruments | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PQCC16 RoHS : Compliant | 6,197 | |||
ADS8327IPW![]() | Texas Instruments | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 6,161 | |||
| 583274-3 | TE Connectivity | Connector Accessory RoHS : Compliant | 3,875 | |||
| ASAKMPC8-32.768KHZT3 | Abracon Corporation | CMOS Output Clock Oscillator, 0.032768MHz Nom RoHS : Compliant | 783 | |||
| ASAKMPA8-32.768KHZT3 | Abracon Corporation | CMOS Output Clock Oscillator, 0.032768MHz Nom RoHS : Compliant | 756 | |||
| 1832742 | Phoenix Contact | Barrier Strip Terminal Block RoHS : Compliant | 703 | |||
| ACT88327VU101-T | Qorvo | Power Management Circuit RoHS : Compliant | 676 | |||
![]() Win Source Electronics | FDMC8327L | Fairchild Semiconductor Corporation | MOSFET N-CH 40V 12A 8MLP RoHS : Compliant |
| 21,000 | |
ADS8327IPW![]() | Texas Instruments | IC ADC 16BIT 500KSPS 16-TSSOP RoHS : Compliant |
| 888 | ||
ADS8327IPWR![]() | Texas Instruments | IC ADC 16BIT 500KSPS 16-TSSOP RoHS : Compliant |
| 810 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |