| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
830L-TQ2-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | MPXV1D0830L220 | KEMET Corporation | FIXED IND 22UH 3.6A 134.5 MOHM RoHS : Compliant |
| 2,978 | |
| MPXV1D0830L220 | KEMET Corporation | FIXED IND 22UH 3.6A 134.5 MOHM RoHS : Compliant |
| 2,978 | ||
| MPXV1D0830L220 | KEMET Corporation | FIXED IND 22UH 3.6A 134.5 MOHM RoHS : Compliant |
| 2,978 | ||
| 18/30 L 2/500-SI | Sensopart | Fiberoptic cable for FMS series |
| 500 | ||
| 18/30 L 3/500-MSC | Sensopart | Fiberoptic cable for FMS series |
| 500 | ||
| 18/30 L 3/1000-MSC | Sensopart | Fiberoptic cable for FMS series |
| 500 | ||
| 18/30 LZ 2/750-SI LS=10 | Sensopart | Fiberoptic cable for FMS series |
| 500 | ||
| 18/30 LZ 3/1000-MSC LS=10 | Sensopart | Fiberoptic cable for FMS series |
| 500 | ||
| OPB830L51 | TT Electronics OPTEK Technology | SENSOR OPT SLOT PHOTOTRAN PCB MT RoHS : Compliant |
| 408 | ||
| CL-830-L225-PC | Intematix Corporation | CHROMALIT LINEAR 80CRI 305X22.5 |
| 241 | ||
| DW-06-20-G-D-830-LL | JRH ELECTRONICS | CONN HDR 12POS 0.1 STACK T/H |
| 164 | ||
| MPXV1D0830L150 | KEMET Corporation | FIXED IND 15UH 4.3A 94.6 MOHM RoHS : Compliant |
| 9 | ||
| MPXV1D0830L150 | KEMET Corporation | FIXED IND 15UH 4.3A 94.6 MOHM RoHS : Compliant |
| 9 | ||
| MPXV1D0830L150 | KEMET Corporation | FIXED IND 15UH 4.3A 94.6 MOHM RoHS : Compliant |
| 9 | ||
| MLX90830-LXG-BAG-003-SP | Melexis Microelectronic Integrated Systems | MEMS PRESSURE SENSORS |
| 4 | ||
![]() Avnet Americas | MPX1D0830L2R2 | KEMET Corporation | Power Inductor (SMD), 2.2 uH, ? 20%, 11.4 A, Shielded, 14 A, 8mm x 8mm x 3mm - Product that comes on tape, but is not reeled (Alt: 03AH4422) RoHS : Compliant |
| 0 | |
| DW-06-20-G-D-830-LL | Samtec Inc | Stacking Board Connector, Locking Lead, DW Series, 12 Contacts, Header, 2.54 mm, Through Hole - Bulk (Alt: DW-06-20-G-D-830-LL) RoHS : Compliant |
| 0 | ||
| MPX1D0830L2R2 | KEMET Corporation | Power Inductor (SMD), 2.2 uH, ? 20%, 11.4 A, Shielded, 14 A, 8mm x 8mm x 3mm - Tape and Reel (Alt: MPX1D0830L2R2) RoHS : Compliant |
| 0 | ||
| MPX1D0830L6R8 | KEMET Corporation | Power Inductor (SMD), 6.8 uH, ? 20%, 6.8 A, Shielded, 10 A, 8mm x 8mm x 3mm - Tape and Reel (Alt: MPX1D0830L6R8) RoHS : Compliant |
| 0 | ||
| MTSW-106-12-G-D-830-LL | Samtec Inc | Pin Header, Board-to-Board, 2 Rows, 12 Contacts, Through Hole, MTSW Series, Unshrouded, Straight - Bulk (Alt: MTSW-106-12-G-D-830-LL) RoHS : Compliant | 0 | |||
| MMSDT-08-30-L-12.00-S-K | Samtec Inc | Cable Assembly Discrete Wire 30AWG 0.3m 16 Position Discrete Wire Housing Receptacle - Bulk (Alt: MMSDT-08-30-L-12.00-S-K) RoHS : Compliant |
| 0 | ||
| PLT0805Z3830LST5 | Vishay Intertechnologies | SMD Chip Resistor, 383 ohm, ? 0.01%, 250 mW, 0805 [2012 Metric], Thin Film, Precision, PLT Series - Tape and Reel (Alt: PLT0805Z3830LST5) RoHS : Compliant |
| 0 | ||
| S1SD-03-28-GF-08.30-L1 | Samtec Inc | - Bulk (Alt: S1SD-03-28-GF-08.30-L1) RoHS : Compliant |
| 0 | ||
| S1SS-02-28-GF-08.30-L1 | Samtec Inc | - Bulk (Alt: S1SS-02-28-GF-08.30-L1) RoHS : Compliant |
| 0 | ||
| MMSD-08-30-L-12.00-D-K-LDS | Samtec Inc | Cable Assembly, IDC Receptacle to IDC Receptacle, 16 Ways, 2.54 mm, 2 Row, 305 mm, 12 "" - Bulk (Alt: MMSD-08-30-L-12.00-D-K-LDS) RoHS : Compliant |
| 0 | ||
| MMSD-08-30-L-28.00-D-K-LDX | Samtec Inc | - Bulk (Alt: MMSD-08-30-L-28.00-D-K-LDX) RoHS : Compliant |
| 0 | ||
| TSW-148-30-L-D | Samtec Inc | - Bulk (Alt: TSW-148-30-L-D) RoHS : Compliant | 0 | |||
| TSW-208-30-L-S-RA | Samtec Inc | - Bulk (Alt: TSW-208-30-L-S-RA) RoHS : Compliant | 0 | |||
| MPXV1D0830L220 | KEMET Corporation | Power Inductor (SMD), 22 uH, ? 20%, 3.6 A, Shielded, 5 A, 8mm x 8mm x 3mm - Tape and Reel (Alt: MPXV1D0830L220) RoHS : Compliant |
| 0 | ||
| S1SS-03-28C-GF-08.30-L1 | Samtec Inc | - Bulk (Alt: S1SS-03-28C-GF-08.30-L1) RoHS : Compliant |
| 0 | ||
![]() Newark | MPXV1D0830L220 | KEMET Corporation | INDUCTOR, AEC-Q200, 22UH, SHIELDED, 3.6A; RoHS : Compliant |
| 2,924 | |
| MPXV1D0830L220 | KEMET Corporation | INDUCTOR, AEC-Q200, 22UH, SHIELDED, 3.6A; RoHS : Compliant |
| 2,924 | ||
| DW-06-20-G-D-830-LL | Samtec Inc | CONN STACK BRD, 2.54MM, 12POS, HDR; RoHS : Compliant |
| 249 | ||
| MPX1D0830L2R2 | KEMET Corporation | INDUCTOR, 2.2UH, 0.01OHM, 11.44A, SMD; RoHS : Compliant |
| 200 | ||
| MPX1D0830L2R2 | KEMET Corporation | INDUCTOR, 2.2UH, 0.01OHM, 11.44A, SMD; RoHS : Compliant |
| 200 | ||
| MPX1D0830LR68 | KEMET Corporation | INDUCTOR, 0.68UH, 4400UOHM, 20.08A, SMD; RoHS : Compliant |
| 200 | ||
| MPX1D0830LR68 | KEMET Corporation | INDUCTOR, 0.68UH, 4400UOHM, 20.08A, SMD; RoHS : Compliant |
| 200 | ||
| MPXV1D0830L2R2 | KEMET Corporation | INDUCTOR, AEC-Q200, 2.2UH, SHLD, 11.4A; RoHS : Compliant |
| 200 | ||
| MPXV1D0830L2R2 | KEMET Corporation | INDUCTOR, AEC-Q200, 2.2UH, SHLD, 11.4A; RoHS : Compliant |
| 200 | ||
| MPXV1D0830L3R3 | KEMET Corporation | INDUCTOR, AEC-Q200, 3.3UH, SHLD, 8.9A; RoHS : Compliant |
| 200 | ||
| MPXV1D0830L3R3 | KEMET Corporation | INDUCTOR, AEC-Q200, 3.3UH, SHLD, 8.9A; RoHS : Compliant |
| 200 | ||
| MPXV1D0830L3R3 | KEMET Corporation | INDUCTOR, AEC-Q200, 3.3UH, SHLD, 8.9A; RoHS : Compliant |
| 184 | ||
| DW-10-14-G-D-830-LL | Samtec Inc | CONN STACK BRD, 2.54MM, 20POS, HDR; RoHS : Compliant |
| 151 | ||
| MPXV1D0830L2R2 | KEMET Corporation | INDUCTOR, AEC-Q200, 2.2UH, SHLD, 11.4A; RoHS : Compliant |
| 149 | ||
| MPXV1D0830L2R2 | KEMET Corporation | INDUCTOR, AEC-Q200, 2.2UH, SHLD, 11.4A; RoHS : Compliant |
| 149 | ||
![]() RS | 100-2830/L | Protective Industrial Products | CO-POLYMERVINYL, CLASS10,12INLENGTH,5MIL.,POWDERFREE;SIZEL;100GLOVESPERPK |
| 4 | |
| 36CC/LED/830/LS EX39 G3 BB 3/1 (564120) | Philips Semiconductors | LED BULB, C COBB, 36 WATTS, 3000 KELVIN, 5000 LUMENS, 100-277 VOLTS, UL TYPE B |
| 3 | ||
| 54CC/LED/830/LS EX39 G3 BB 3/1 (564203) | Philips Semiconductors | LED BULB, C COBB, 54 WATTS, 3000 KELVIN, 7500 LUMENS, 100-277 VOLTS, UL TYPE B |
| 3 | ||
| 63CC/LED/830/LS EX39 G3 BB 3/1 (564237) | Philips Semiconductors | LED BULB, C COBB, 63 WATTS, 3000 KELVIN, 8600 LUMENS, 100-277 VOLTS, UL TYPE B |
| 1 | ||
| 45CC/LED/830/LS EX39 G3 BB 3/1 (564179) | Philips Semiconductors | LED BULB, C COBB, 45 WATTS, 3000 KELVIN, 6200 LUMENS, 100-277 VOLTS, UL TYPE B |
| 1 | ||
| OPB830L51 | TT Electronics OPTEK Technology | SENSOR, SLOTTED OPTICAL SWITCH, 3.18MM SLOT, 2V EMITTER, 30V DETECTOR, 30 MA RoHS : Compliant |
| 0 | ||
| 7731181830LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 7731541830LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| MPX1D0830L2R2 | KEMET Corporation | INDUCTOR, METAL 2.2 UH, 14A, 13.6 MOHM RoHS : Compliant |
| 0 | ||
| MPX1D0830L6R8 | KEMET Corporation | INDUCTOR, METAL 6.8 UH, 10A, 37.9 MOHM RoHS : Compliant |
| 0 | ||
| 98414-G08-30LF | Amphenol FCi | MINITEK HDR DR TMT VERT-SHROUDED RoHS : Compliant |
| 0 | ||
| MY1C40TN-1830L | SMC Corporation of America | CYLINDER, RODLESS, MECH JOINT, SLIDE TABLE, MY1 SERIES |
| 0 | ||
| SGE-225-0-1830L 03000C-00100C (701771035) | OMRON Scientific Technologies Inc | SGE-225-0-1830L 03000C-00100C |
| 0 | ||
| SGE-365-0-1830L 05000C-05000C (701521805) | OMRON Scientific Technologies Inc | SGE-365-0-1830L 05000C-05000C |
| 0 | ||
| LT-2544-511-012 (GLT-00003830 | LT-2544-511-012 | LT2544511012) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
![]() Microchip Technology Inc | HV830LG-G | Microchip Technology Inc | EL LAMP DRIVER, SOIC, Projected EOL: 2027-03-15 RoHS : Compliant |
| 3,395 | |
MCP73830LT-0BCI/MYY![]() | Microchip Technology Inc | Charger with Soft Start, TDFN, Projected EOL: 2040-09-29 RoHS : Compliant |
| 1,316 | ||
MCP73830LT-0AAI/MYY![]() | Microchip Technology Inc | CHARGER WITH SOFT START, TDFN, Projected EOL: 2040-09-29 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | PSMN5R8-30LL,115![]() | NXP Semiconductors | Power Field-Effect Transistor, 40A I(D), 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 33 | |
| HMC830LP6GETR | Analog Devices Inc | HMC830 - 25-3000 Mhz Fractional-N Pll with Integrated VCO RoHS : Compliant |
| 1,048,644 | ||
![]() Sager | DW-06-20-G-D-830-LL | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 249 | |
| C-938-30-LI-LO | General Devices | Mounting Hardware |
| 0 | ||
| MTSW-106-12-G-D-830-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MMSD-08-30-L-08.00-D-K-LUX | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-08-30-L-16.00-D-K-LUS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-08-30-L-30.00-D-K-LDX | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSDT-08-30-L-12.00-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, Teflon Cable, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| S1SD-03-28-GF-08.30-L1 | Samtec Inc | Rectangular Cable Assemblies Micro Mate Double Row Discrete Wire Cable Assembly, 1.00 mm Pitch RoHS : Compliant |
| 0 | ||
| S1SS-02-28-GF-08.30-L1 | Samtec Inc | Rectangular Cable Assemblies Micro Mate Single Row Discrete Wire Cable Assembly, 1.00 mm Pitch RoHS : Compliant |
| 0 | ||
| MMSD-08-30-L-04.00-D-K-LDX | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-08-30-L-12.00-D-K-LDS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| MMSD-08-30-L-25.00-D-K-LDS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMTS-08-30-L-07.87-S | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-08-30-L-06.00-S-K | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-08-30-L-10.00-D-K-LDS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
![]() TME | MPX1D0830L2R2 | KEMET Corporation | Inductor: wire; SMD; 2.2uH; Ioper: 11.4A; R: 13.6mΩ; ±20%; Isat: 14A RoHS : Compliant |
| 199 | |
| MPX1D0830LR68 | KEMET Corporation | Inductor: wire; SMD; 680nH; Ioper: 20.1A; R: 4.4mΩ; ±20%; Isat: 28A RoHS : Compliant |
| 188 | ||
| MPX1D0830LR33 | KEMET Corporation | Inductor: wire; SMD; 330nH; Ioper: 25.8A; R: 2.7mΩ; ±20%; Isat: 35A RoHS : Compliant |
| 188 | ||
| 2037 18-30 LGR | OBO BETTERMANN GmbH & Co KG | Mounting holder; ØBraid : 18÷30mm; W: 40mm; H: 34mm |
| 150 | ||
| MPX1D0830L1R5 | KEMET Corporation | Inductor: wire; SMD; 1.5uH; Ioper: 14A; R: 9.1mΩ; ±20%; Isat: 18A RoHS : Compliant |
| 34 | ||
| MPXV1D0830L220 | KEMET Corporation | Inductor: ferrite; 22uH; Ioper: 3.6A; R: 134.5mΩ; ±20%; Isat: 5A RoHS : Compliant |
| 0 | ||
| MPXV1D0830L150 | KEMET Corporation | Inductor: ferrite; 15uH; Ioper: 4.3A; R: 94.6mΩ; ±20%; Isat: 6.5A RoHS : Compliant |
| 0 | ||
| MPXV1D0830L2R2 | KEMET Corporation | Inductor: ferrite; 2.2uH; Ioper: 11.4A; R: 13.6mΩ; ±20%; Isat: 14A RoHS : Compliant |
| 0 | ||
| MPXV1D0830L6R8 | KEMET Corporation | Inductor: ferrite; 6.8uH; Ioper: 6.8A; R: 37.9mΩ; ±20%; Isat: 10A RoHS : Compliant |
| 0 | ||
| MPXV1D0830L3R3 | KEMET Corporation | Inductor: ferrite; 3.3uH; Ioper: 8.9A; R: 22.3mΩ; ±20%; Isat: 12.5A RoHS : Compliant |
| 0 | ||
| MPX1D0830L220 | KEMET Corporation | Inductor: wire; SMD; 22uH; Ioper: 3.6A; R: 134.5mΩ; ±20%; Isat: 5A RoHS : Compliant |
| 0 | ||
| R0830LC14F | IXYS UK Westcode | Thyristor: hockey-puck; 1.4kV; 830A; W10; Ø58.5/Ø34mm; Press-Pack |
| 0 | ||
| GN 2342-NI-8-30-L-1 | Elesa+Ganter | Assembly pin; Ø: 8mm; L: 30mm; stainless steel |
| 0 | ||
| MPXV1D0830L1R5 | KEMET Corporation | Inductor: ferrite; 1.5uH; Ioper: 14A; R: 9.1mΩ; ±20%; Isat: 18A RoHS : Compliant |
| 0 | ||
| MPXV1D0830LR33 | KEMET Corporation | Inductor: ferrite; 330nH; Ioper: 25.8A; R: 2.7mΩ; ±20%; Isat: 35A RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | VND830LSPTRE | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 2 Driver, 23A, PDSO10 RoHS : Compliant | 10,200 | ||
| VND830LSPE | STMicroelectronics | Buffer/Inverter Based Peripheral Driver, 2 Driver, 23A, PDSO10 RoHS : Compliant | 200 | |||
![]() Interstate Connecting Components | 10159583-0L71000LF | Amphenol FCi | PWRBLADE MINI MEZZ VH ST-40LP5 | 0 | ||
| 98414-G08-30LF | Amphenol FCi | LEAD FREE RoHS : Compliant |
| 0 | ||
| 98414-S08-30LF | Amphenol FCi | MINITEK HEADER RoHS : Compliant |
| 0 | ||
| 77313-118-30LF | Amphenol FCi | BERGSTIK RoHS : Unknown |
| 0 | ||
![]() Powell Electronics | TSW-108-30-L-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 492 | |
| 77313-118-30LF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 264 | ||
| DW-02-12-T-D-830-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 180 | ||
| DW-06-20-G-D-830-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 164 | ||
| DW-07-20-G-D-830-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 158 | ||
| DW-12-20-G-D-830-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 129 | ||
| TSW-118-30-L-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 126 | ||
| DW-10-14-G-D-830-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 100 | ||
| ZSS-107-04-L-D-830-LL | Samtec Inc | .100" Shrouded Elevated Terminal Strip RoHS : Compliant |
| 65 | ||
![]() Chip 1 Exchange | MPXV1D0830L220 | YAGEO Corporation | INSTOCK RoHS : Compliant | 46,800 | ||
| IRF830LPBF | INSTOCK | 2,945 | ||||
| GT-S5830L | INSTOCK | 154 | ||||
| CL-830-L152-XT | INSTOCK | 10 | ||||
![]() Avnet Abacus | MPXV1D0830LR47 | KEMET Corporation | Power Inductor SMD AECQ200 470 nH 24 A Shielded 30 A MPXV Series - Tape and Reel (Alt: MPXV1D0830LR47) RoHS : Compliant | 24,000 | ||
| MPX1D0830L2R2 | KEMET Corporation | Power Inductor SMD 22 uH 20 114 A Shielded 14 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPX1D0830L2R2) RoHS : Compliant | 0 | |||
| MPX1D0830L6R8 | KEMET Corporation | Power Inductor SMD 68 uH 20 68 A Shielded 10 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPX1D0830L6R8) RoHS : Compliant | 0 | |||
| MPX1D0830LR68 | KEMET Corporation | Power Inductor SMD 680 nH 20 201 A Shielded 28 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPX1D0830LR68) RoHS : Compliant | 0 | |||
| MPX1D0830L220 | KEMET Corporation | Power Inductor SMD 22 uH 20 36 A Shielded 5 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPX1D0830L220) RoHS : Compliant | 0 | |||
| MPX1D0830L1R5 | KEMET Corporation | Power Inductor SMD 15 uH 20 14 A Shielded 18 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPX1D0830L1R5) RoHS : Compliant | 0 | |||
| MPX1D0830LR33 | KEMET Corporation | Power Inductor SMD 330 nH 20 258 A Shielded 35 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPX1D0830LR33) RoHS : Compliant | 0 | |||
| MPXV1D0830L220 | KEMET Corporation | Power Inductor SMD 22 uH 20 36 A Shielded 5 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPXV1D0830L220) RoHS : Compliant | 0 | |||
| MPXV1D0830L150 | KEMET Corporation | Power Inductor SMD 15 uH 20 43 A Shielded 65 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPXV1D0830L150) RoHS : Compliant | 0 | |||
| MPXV1D0830L2R2 | KEMET Corporation | Power Inductor SMD 22 uH 20 114 A Shielded 14 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPXV1D0830L2R2) RoHS : Compliant | 0 | |||
| MPXV1D0830L6R8 | KEMET Corporation | Power Inductor SMD 68 uH 20 68 A Shielded 10 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPXV1D0830L6R8) RoHS : Compliant | 0 | |||
| MPXV1D0830L3R3 | KEMET Corporation | Power Inductor SMD 33 uH 20 89 A Shielded 125 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPXV1D0830L3R3) RoHS : Compliant | 0 | |||
| 77311-118-30LF | Amphenol Corporation | Conn Unshrouded Header HDR 30 POS 254mm Solder ST ThruHole Bag (Alt: 77311-118-30LF) RoHS : Compliant | 0 | |||
| MPXV1D0830L1R5 | KEMET Corporation | Power Inductor SMD 15 uH 20 14 A Shielded 18 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPXV1D0830L1R5) RoHS : Compliant | 0 | |||
| MPXV1D0830LR33 | KEMET Corporation | Power Inductor SMD 330 nH 20 258 A Shielded 35 A 8mm x 8mm x 3mm - Tape and Reel (Alt: MPXV1D0830LR33) RoHS : Compliant | 0 | |||
![]() Avnet Asia | MPXV1D0830LR47 | KEMET Corporation | (Alt: MPXV1D0830LR47) RoHS : Compliant | 0 | ||
| UPI2X10830LR47 | KEMET Corporation | (Alt: UPI2X10830LR47) RoHS : Compliant | 0 | |||
![]() Avnet Silica | HV830LG-G | Microchip Technology Inc | (Alt: HV830LG-G) RoHS : Compliant | 0 | ||
MCP73830LT-0BCI/MYY![]() | Microchip Technology Inc | (Alt: MCP73830LT-0BCI/MYY) RoHS : Compliant | 0 | |||
MCP73830LT-0AAI/MYY![]() | Microchip Technology Inc | (Alt: MCP73830LT-0AAI/MYY) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | HV830LG-G | Microchip Technology Inc | (Alt: HV830LG-G) RoHS : Compliant | 0 | ||
| IRF830LPBF | Vishay Intertechnologies | MOSFET NCHANNEL 500V (Alt: IRF830LPBF) RoHS : Compliant | 0 | |||
MCP73830LT-0AAI/MYY![]() | Microchip Technology Inc | (Alt: MCP73830LT-0AAI/MYY) RoHS : Compliant | 0 | |||
![]() Master Electronics | HTSW-218-30-L-Q | Samtec Inc | RoHS : Compliant |
| 0 | |
| HTSW-108-30-L-D-RA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-138-30-L-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| T2SD-08-30-L-03.00-D-NUS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-06-20-G-D-830-LL | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| MTSW-106-12-G-D-830-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-08-30-L-03.00-S-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-08-30-L-08.00-D-K-LUX | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-08-30-L-16.00-D-K-LUS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSD-08-30-L-30.00-D-K-LDX | Samtec Inc | Cable Assembly IDC Receptacle to IDC Receptacle 16 Ways 2.54 mm 2 Row 762 mm 30 RoHS : Compliant |
| 0 | ||
| MMSDT-08-30-L-03.25-D-P-LD | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSDT-08-30-L-12.00-S-K | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Teflon® Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSDT0830L24.00DKLDX | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSST-08-30-L-04.25-D-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SD-03-28-GF-08.30-L1 | Samtec Inc | MICRO MATE DOUBLE ROW DI RoHS : Compliant |
| 0 | ||
![]() Neutron USA | CG83.0LTR | Littelfuse Inc | Gas Discharge Tubes - GDTs / Gas Plasma Arrestors GP S.A. STANDARD 3000V NOMINAL RoHS : Compliant |
| 50 | |
![]() Pasternack Enterprises US | PE3830LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to N Female Bulkhead Cable 48 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly N male to N female bulkhead cable 48 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 48 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3830LF-48, can also be known as a type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3830LF-48 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3830LF-48 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 48 inch length using RG402 coax, RoHS. |
| 0 | |
| PE3W01830LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using LMR-240-DB Coax, RoHS. PE3W01830LF is a N male to N female bulkhead cable using LMR-240-DB coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01830LF N male to N female bulkhead cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W12830LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. 7/16 DIN Female Bulkhead to 7/16 DIN Female Bulkhead Cable Using 1/4 inch Superflexible Coax, LF Solder. PE3W12830LF is a 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable using 1/4" Superflexible coax. This Pasternack 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our female 7/16 DIN bulkhead to female 7/16 DIN bulkhead cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W12830LF 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable assembly is constructed with 1/4" Superflexible coax. | 0 | |||
| PE3C3830LF-12 | Pasternack Enterprises |
| 0 | |||
| PE3W10830LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C3830LF-48 | Pasternack Enterprises |
| 0 | |||
| PE3W18830LF | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity BNC Female to Reverse Polarity BNC Female Cable Using LMR-195 Coax, LF Solder. PE3W18830LF is a reverse polarity BNC female to reverse polarity BNC female cable using LMR-195 coax. This Pasternack reverse polarity BNC female to reverse polarity BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our reverse polarity female BNC to reverse polarity female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18830LF BNC reverse polarity female to BNC reverse polarity female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3830LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 18 inches. N Male to N Female Bulkhead Cable 18 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly N male to N female bulkhead cable 18 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 18 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3830LF-18, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3830LF-18 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3830LF-18 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 18 inch length using RG402 coax, RoHS. |
| 0 | ||
| PE3W09830LF | Pasternack Enterprises | 0 | ||||
| PE3C3830LF-36 | Pasternack Enterprises |
| 0 | |||
| PE3C3830LF-18 | Pasternack Enterprises |
| 0 | |||
| PE3C1830LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Cable Using LMR-240 Coax with HeatShrink, LF Solder. PE3C1830LF/HS is a SMA male to BNC male cable using LMR-240 coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1830LF/HS SMA male to BNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3830LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Female Bulkhead Cable 60 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly N male to N female bulkhead cable 60 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 60 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3830LF-60, can also be known as a N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3830LF-60 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3830LF-60 can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 60 inch length using RG402 coax, RoHS. |
| 0 | ||
| PE3W11830LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG141 Coax with HeatShrink, LF Solder. PE3W11830LF/HS is a N male right angle to N male right angle cable using RG141 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11830LF/HS N male right angle to N male right angle cable assembly is constructed with RG141 coax. | 0 | |||
| PE3830LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Female Bulkhead Cable 36 Inch Length Using RG402 Coax, RoHS., Radio frequency assembly N male to N female bulkhead cable 36 inch length using RG402 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 36 inch length using RG402 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type bulkhead cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3830LF-36, can also be known as a N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3830LF-36 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3830LF-36 can also be used in the other direction and will be N type female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 36 inch length using RG402 coax, RoHS. |
| 0 | ||
![]() Vyrian | PH3830L,115 | NXP Semiconductors | Power Field-Effect Transistor, 98A I(D), 30V, 0.0049ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant | 12,010 | ||
| MAX6830LGUT-T | Analog Devices Inc | Power Supply Management Circuit, Fixed, 2 Channel, BICMOS, PDSO6 RoHS : Not Compliant | 10,803 | |||
| MAX6830LHUT-T | Analog Devices Inc | Power Supply Management Circuit, Fixed, 2 Channel, BICMOS, PDSO6 RoHS : Not Compliant | 10,272 | |||
| PH4830L | Nexperia | Power Field-Effect Transistor, 84A I(D), 30V, 0.0048ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant | 8,113 | |||
| EVAL01-HMC830LP6GE | Analog Devices Inc | Development kits/Accessories RoHS : Compliant | 7,176 | |||
| MAX6830LVUT-T | Analog Devices Inc | Power Supply Management Circuit, Fixed, 2 Channel, BICMOS, PDSO6 RoHS : Not Compliant | 6,844 | |||
MT5C2568-30LIT![]() | Micron Technology Inc | Standard SRAM, 32KX8, 30ns, CMOS, PDIP28 RoHS : Not Compliant | 6,749 | |||
| MAX6830LDUT-T | Analog Devices Inc | Power Supply Management Circuit, Fixed, 2 Channel, BICMOS, PDSO6 RoHS : Not Compliant | 6,600 | |||
| MT5C1608-30LAT | Micron Technology Inc | Standard SRAM, 2KX8, 30ns, CMOS, PDIP24 RoHS : Not Compliant | 6,436 | |||
PSMN3R8-30LL,115![]() | NXP Semiconductors | Power Field-Effect Transistor, 40A I(D), 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 5,849 | |||
| MT5C1608-30L | Micron Technology Inc | Standard SRAM, 2KX8, 30ns, CMOS, PDIP24 RoHS : Not Compliant | 4,944 | |||
PH4830L,115![]() | Nexperia | Power Field-Effect Transistor, 84A I(D), 30V, 0.0048ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant | 4,364 | |||
EP1830LC-25![]() | Altera Corporation | OT PLD, 28ns, 48-Cell, CMOS, PQCC68 RoHS : Not Compliant | 3,795 | |||
| MT5C1628-30L | Micron Technology Inc | Standard SRAM, 2KX8, 30ns, CMOS, PDIP28 RoHS : Not Compliant | 3,715 | |||
DAC0830LJ![]() | Texas Instruments | D/A Converter | 3,085 | |||
![]() Win Source Electronics | HMC830LP6GE | Analog Devices Inc | IC INTEGER-N/FRACTIONAL 40SMT RoHS : Compliant |
| 30,000 | |
| HMC830LP6GETR | Analog Devices Inc | Clock Generator MHz to 350MHz-IN 3000MHz-OUT 40-Pin LFCSP EP Cut Tape / IC FRACT-N PLL W/VCO 40QFN RoHS : Compliant |
| 14,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |