| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
8041FDHKP nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | 7847804120 | Wurth Elektronik | FIXED IND 12NH 300MA 410 MOHM RoHS : Compliant |
| 1,792 | |
| 7847804120 | Wurth Elektronik | FIXED IND 12NH 300MA 410 MOHM RoHS : Compliant |
| 1,792 | ||
| M80-4140698 | Harwin | CONN RCPT HSG 6POS 2.00MM RoHS : Compliant |
| 1,033 | ||
| 0804109:0001 | Phoenix Contact | ADHESIVE MARKER CARD 1-10 RoHS : Compliant |
| 238 | ||
| 2804-102 | Abbatron | BDG POST 2804-102 SPR TYPE |
| 100 | ||
| 280-415 | WAGO Innovative Connections | PROTECTIVE WARNING MARKER; WITH RoHS : Compliant |
| 84 | ||
| 0804160 | Phoenix Contact | AC RCPT NEMA 5-15R RoHS : Compliant |
| 65 | ||
| M80-4151498 | Harwin | CONN RCPT HSG 14POS 2.00MM RoHS : Compliant |
| 33 | ||
| 0804183:0011 | Phoenix Contact | MARKER CARD PRINTED 11-20 RoHS : Compliant |
| 22 | ||
| 7848041801 | Wurth Elektronik | CMC 1.5 MH; 18 A; 3.2 M |
| 8 | ||
| M80-4182098 | Harwin | CONN RCPT HSG 20POS 2.00MM RoHS : Compliant |
| 8 | ||
| 7000-18041-0160500 | Murrelektronik GmbH | MSUD VALVE PLUG FORM A 18MM, PVC RoHS : Compliant |
| 4 | ||
| 7000-08041-6100750 | Murrelektronik GmbH | CIRC CBL 3POS PLUG TO WIRE 24.6' RoHS : Compliant |
| 2 | ||
| 7000-18041-2161000 | Murrelektronik GmbH | MSUD VALVE PLUG FORM A 18MM, PVC RoHS : Compliant |
| 1 | ||
| 8041 | Heyco | 8041-000 (SWITCH BUS BAR #3691 |
| 0 | ||
![]() Avnet Americas | 53048-0410 | Molex | Pin Header, 4 Contacts, 1 Row, 1.25mm, Matte Tin, 1A, Right Angle, Shrouded, Phosphor Bronze, THT RA - Trays (Alt: 0530480410) RoHS : Compliant |
| 100,000 | |
| EMI8041MUTAG | onsemi | Common Mode Filter with ESD Protection=750MHz CM Stop Band Attenuation for HDMI Interfaces Single Pair EMI Filter - Consumer Qualified. ONSSPCPRTCNIW2U6D; - Tape and Reel (Alt: EMI8041MUTAG) RoHS : Compliant |
| 45,000 | ||
| ISL80410IBEZ-T | Renesas Electronics Corporation | - Tape and Reel (Alt: ISL80410IBEZ-T) RoHS : Compliant | 15,000 | |||
| 09-50-8041 | Molex | Conn Housing RCP 4 POS 3.96mm Crimp ST Bag - Bulk (Alt: 0009508041) RoHS : Compliant |
| 5,029 | ||
| RJE231880413T | Amphenol Corporation | RJ45 Connector Receptacle 8 Position 1 Port Right Angle Surface Mount T/R - Tape and Reel (Alt: RJE231880413T) RoHS : Not Compliant |
| 2,800 | ||
| 215958-0416 | Molex | - Bulk (Alt: 2159580416) RoHS : Compliant |
| 336 | ||
| 42818-0412 | Molex | Conn Housing Wire to Board Housing Plug 4 POS 10mm ST Panel Mount Bag - Bulk (Alt: 0428180412) RoHS : Compliant |
| 15 | ||
| 20026680-41 | TE Connectivity | Pressure Transmitter, IoT Wireless, Compound, BSPP, 0 bar, 35 bar, 1/4", Connector" - Bulk (Alt: 20026680-41) RoHS : Not Compliant |
| 10 | ||
| 59804-1 | TE Connectivity | Insertion Tool, 68.05mm, T-Handle, MTA .156" Connectors, Slotted Blade" - Bag (Alt: 59804-1) RoHS : Compliant |
| 1 | ||
| 22-28-8041 | Molex | - Bulk (Alt: 0022288041) RoHS : Compliant |
| 0 | ||
| 38041-0000-25-7 | congatec AG | COME-BRP6 E2 I7-13800HRE - Bulk (Alt: 38041-0000-25-7) RoHS : Not Compliant | 0 | |||
| 13008-041KESB/HR | Vishay Intertechnologies | Surface Mount Tantalum Capacitor, 330 uF, 20 V, ? 10%, 0.1 Ohm, F Size Code - Tape and Reel (Alt: 13008-041KESB/HR) RoHS : Not Compliant |
| 0 | ||
| 34793-8041 | Molex | Pin Header, 4 Contacts, 1 Row, 2 mm, Tin, Brass, PCB Header, Right Angle, Mini50 34793 Series, 4 A - Tape and Reel (Alt: 0347938041) RoHS : Compliant |
| 0 | ||
| 680415-1 | TE Connectivity | - Bulk (Alt: 680415-1) RoHS : Not Compliant | 0 | |||
| 50641-8041 | Molex | Contact SKT Crimp ST Cable Mount Reel - Tape and Reel (Alt: 0506418041) RoHS : Compliant | 0 | |||
![]() Newark | 50641-8041 | Molex | CONTACT, SOCKET, 28AWG, CRIMP PRODUCT RA; (Alternate Part Number: 800753746749 RoHS : Compliant |
| 50,000 | |
| 50641-8041 | Molex | CONTACT, SOCKET, 28AWG, CRIMP; (Alternate Part Number: 800753746749 RoHS : Compliant |
| 37,650 | ||
| 480416-1 | TE Connectivity | CONNECTOR HOUSING, RCPT, 1POS; RoHS : Compliant |
| 7,383 | ||
| 8041 | Videk Ltd | PORT SAVER, D, 9WAY; RoHS : Compliant |
| 1,398 | ||
KSZ8041RNLI-TR![]() | Microchip Technology Inc | ENET TRANSCEIVER, 100MBPS, -40TO85DEG C; RoHS : Compliant |
| 834 | ||
KSZ8041RNLI-TR![]() | Microchip Technology Inc | ENET TRANSCEIVER, 100MBPS, -40TO85DEG C; RoHS : Compliant |
| 834 | ||
| RJE1J-188-0410 | Amphenol Communications Solutions | CONNECTOR, UNSHLD, RJ45, JACK, 8P8C; RoHS : Compliant |
| 701 | ||
| KSZ8041FTL | Microchip Technology Inc | ETHERNET TRANSCEIVER, 100MBPS, TQFP-48; RoHS : Compliant |
| 288 | ||
| 7847804120 | Wurth Elektronik | MULTILAYER INDUCTOR, 12NH, 0.3A, 0402; RoHS : Compliant |
| 250 | ||
| 7847804120 | Wurth Elektronik | MULTILAYER INDUCTOR, 12NH, 0.3A, 0402; RoHS : Compliant |
| 250 | ||
AD8041ARZ![]() | Analog Devices Inc | OP-AMP, 170MHZ, -40 TO 85DEG C, SOIC-8; RoHS : Compliant |
| 111 | ||
| M80-4131298 | Harwin | WTB HOUSING CONNECTOR, 12POS, 2ROW, 2MM; RoHS : Compliant |
| 81 | ||
| 2804-102 | Abbatron | BINDING POST, 15A, #6-32, STUD, RED; Product Range:280x-10x Series; Current Rating:15A; Voltage Rating:-; Contact Plating:Nickel Plated Contacts; Connector Mounting:Panel Mount; Connector Colour:Red; Contact Material:Brass RoHS Compliant: Yes RoHS : Compliant |
| 80 | ||
| 2480410000 | Weidmüller Interface GmbH & Co. KG | SUPPLEMENTARY CKT BREAKER, 2 POLE, 30A; Product Range:MCB 1077 Series; Current Rating:30A; No. of Poles:2 Pole; Voltage Rating VDC:125V; Voltage Rating VAC:415V; Circuit Breaker Mounting:DIN Rail RoHS Compliant: Yes RoHS : Compliant |
| 4 | ||
| M80-4182098 | Harwin | WTB HOUSING CONNECTOR, 20POS, 2ROW, 2MM; RoHS : Compliant |
| 1 | ||
![]() RS | 2804-102 | HH Smith | BINDING POST SPRING TYPE 6-32 THREADED BRASS/NYLON/NICKEL RED |
| 119 | |
| 42818-0412 (428180412) | Molex | MINI-FIT SR. SERIES 10MM PITCH 4 WAY 1 ROW MALE STRAIGHT PCB HOUSING 42818 |
| 16 | ||
| 0804109:0001 (SK 3 81/2 8:FORTL.ZAHLEN 1-10) | Phoenix Contact | CIRCULAR CONNECTOR SK 3 81/2 8:FORTL.ZAHLEN 1-10 SK SERIES |
| 11 | ||
| 7000-08041-2100500 | SMC Corporation of America | PVC JACKET, 5M LG, JIS, M8 3 PIN FEMALE GRAY |
| 10 | ||
| 0804183:0011 (SK 5/3 8:FORTL.ZAHLEN 11-20) | Phoenix Contact | MARKER CARD PRINT HORIZONTALLY 11 TO 20 SK SERIES |
| 10 | ||
| 280414 | RS Pro | PLAIN STAINLESS STEEL THREADED ROD M10 1M |
| 7 | ||
| 7000-18041-0160500 | Murrelektronik GmbH | MSUD VALVE PLUG FORM A 18MM, PVC 3X0.75 YELLOW, 5M RoHS : Compliant |
| 6 | ||
| 80414-2W | Leviton Manufacturing Co | BLANK MULTIMEDIA INSERT, QUICKPORT DECORA, WHITE, UL LISTED COVER, 80414 SERIES |
| 5 | ||
| 7000-08041-6100500 | Murrelektronik GmbH | CABLE, M8 FEMALE 0 DEGREE A-CODED, 3-POLE, PVC CABLE, 3 WIRES, 5 METERS, BLACK RoHS : Compliant |
| 5 | ||
| 7000-08041-2100500 | Murrelektronik GmbH | M8 FEMALE WITH CABLE, PVC 3X0.25 GY UL/CSA 5M RoHS : Compliant |
| 5 | ||
| 7014-08041-2100300 | Murrelektronik GmbH | CORDSET, M8, FEMALE 0 DEG. WITH CABLE F+B, PVC 3X0.25 GY UL/CSA 3M RoHS : Compliant |
| 3 | ||
| 0804160 | Phoenix Contact | SOCKET PIN CONNECTOR PATTERN TYPE AB 15A SCREW CONNECTION FOR USA RoHS : Compliant |
| 2 | ||
| 19127080411 | HARTING Technology Group | CONNECTOR, POWER, HEAVY DUTY, HAN COMPACT-GG M25-SW-METAL RoHS : Compliant |
| 2 | ||
| 7000-08041-6100500 | SMC Corporation of America | PVC JACKET, 5M, BLACK, M8 3 PIN FEMALE STR |
| 2 | ||
| 05028041001 (028041) | Wera Werk Hermann Werner GmbH & Co. KG | 300 7 IP/0.9 TAMPERPROOF, TORQUE-INDICATOR SERIES |
| 1 | ||
![]() Microchip Technology Inc | KSZ8041FTLI-TR | Microchip Technology Inc | 10/100 BASE-FX Physical Layer Transceiver, TQFP, Projected EOL: 2041-09-02 RoHS : Compliant |
| 73,220 | |
KSZ8041RNLI-TR![]() | Microchip Technology Inc | 10/100 BASE-TX Physical Layer Transceiver, VQFN, Projected EOL: 2040-10-18 RoHS : Compliant |
| 44,691 | ||
| KSZ8041NLI | Microchip Technology Inc | 10/100 BASE-TX Physical Layer Transceiver, VQFN, Projected EOL: 2046-03-08 RoHS : Compliant |
| 11,498 | ||
| KSZ8041RNLI | Microchip Technology Inc | 10/100 BASE-TX Physical Layer Transceiver, VQFN, Projected EOL: 2046-03-08 RoHS : Compliant |
| 10,290 | ||
| KSZ8041NL-AM-TR | Microchip Technology Inc | 10/100 BASE-TX Physical Layer Transceiver, VQFN, Projected EOL: 2027-12-11 RoHS : Compliant |
| 10,026 | ||
| KSZ8041MLL | Microchip Technology Inc | 10/100 BASE-TX Physical Layer Transceiver, LQFP, Projected EOL: 2036-06-04 RoHS : Compliant |
| 9,500 | ||
| KSZ8041FTL-S | Microchip Technology Inc | 10/100 BASE-FX Physical Layer Transceiver, TQFP, Projected EOL: 2040-10-13 RoHS : Compliant |
| 9,250 | ||
| KSZ8041NL | Microchip Technology Inc | 10/100 BASE-TX Physical Layer Transceiver, VQFN, Projected EOL: 2035-09-30 RoHS : Compliant |
| 9,095 | ||
KSZ8041FTL-TR![]() | Microchip Technology Inc | 10/100 BASE-FX Physical Layer Transceiver, TQFP, Projected EOL: 2036-08-07 RoHS : Compliant |
| 9,000 | ||
| KSZ8041FTLI | Microchip Technology Inc | 10/100 BASE-FX Physical Layer Transceiver, TQFP, Projected EOL: 2035-11-08 RoHS : Compliant |
| 7,576 | ||
KSZ8041NL-AM![]() | Microchip Technology Inc | 10/100 BASE-TX Physical Layer Transceiver, VQFN, Projected EOL: 2027-12-11 RoHS : Compliant |
| 6,427 | ||
| KSZ8041FTL | Microchip Technology Inc | 10/100 BASE-FX Physical Layer Transceiver, TQFP, Projected EOL: 2036-02-16 RoHS : Compliant |
| 5,349 | ||
| KSZ8041RNL-TR | Microchip Technology Inc | 10/100 BASE-TX Physical Layer Transceiver, VQFN, Projected EOL: 2041-02-08 RoHS : Compliant |
| 469 | ||
| KSZ8041RNL | Microchip Technology Inc | 10/100 BASE-TX Physical Layer Transceiver, VQFN, Projected EOL: 2046-03-08 RoHS : Compliant |
| 226 | ||
| KSZ8041NL-EVAL | Microchip Technology Inc | KSZ8041NL EVAL BOARD, Projected EOL: |
| 16 | ||
![]() Rochester Electronics | LA78041-E | onsemi | Vertical Deflection IC, PZIP7 RoHS : Compliant |
| 75 | |
| EMI8041BMUTAG | onsemi | Common Mode Filter with ESD Protection 750MHz Stop Band Attenuation for HDMI Interfaces Single Pair EMI Filter Consumer Qualified RoHS : Compliant |
| 658,831 | ||
AD8041AR![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 8000uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant |
| 4,154 | ||
AD8041ARZ-REEL![]() | Analog Devices Inc | Op Amp Standard 160MHz 8-SOIC T/R RoHS : Compliant |
| 27 | ||
AD8041AR-REEL![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 8000uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant |
| 480 | ||
AD8041AN![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 8000uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant |
| 3,591 | ||
AD8041ARZ-REEL7![]() | Analog Devices Inc | Op Amp Standard 160MHz 8-SOIC T/R RoHS : Compliant |
| 24 | ||
AD8041ANZ![]() | Analog Devices Inc | Op Amp Standard 160MHz 8-DIP Tube RoHS : Compliant |
| 120 | ||
AD8041AR-REEL7![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 8000uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant |
| 6,733 | ||
P8041AH![]() | Intel Corporation | Microcontroller, 8-Bit, MROM, 8048 CPU, 0.833MHz, NMOS, PDIP40 RoHS : Not Compliant |
| 666 | ||
| ISL80410IBEZ | Intersil Corporation | ISL80410 - 40V, Low Quiescent Current, High Accuracy, 150mA Linear Regulator RoHS : Compliant |
| 2 | ||
DS1804-100![]() | Maxim Integrated Products | DS1804 NV Trimmer Potentiometer RoHS : Not Compliant |
| 1,446 | ||
| UPD78F8041K8(R)-9B4-E2-AX | Renesas Electronics Corporation | Microcontroller, 16-Bit, 64KB FLASH, 78K0R CPU RoHS : Compliant |
| 2,494 | ||
![]() Sager | 0804109:0001 | Phoenix Contact | Terminal Block Tools & Accessories SK 3,81/2,8 FORTL.ZAHLEN 1-10 RoHS : Compliant |
| 5 | |
| 7706608041 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707218041 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 1-480418-3 | TE Connectivity | Terminals 205 FASTON HSG.,REC.,1 POS,NATRUAL RoHS : Compliant |
| 0 | ||
| 1804-100 | HONEYWELL TEST AND MEASUREMENT | 1804-100,1AD,2U,6AC,15C:MODEL 1800, 100 | 0 | |||
| 0804115 | Phoenix Contact | Surge Suppressors EO-K/UT/LED RoHS : Compliant | 0 | |||
| 0804160 | Phoenix Contact | AC Power Entry Modules EO-AB/UT/LED/S/15 RoHS : Compliant |
| 0 | ||
0804197![]() | Phoenix Contact | Labels & Industrial Warning Signs EMLF (108XE)R BU RoHS : Compliant |
| 0 | ||
| V751A804-1KZ00-000 | Carling Technologies | Rocker Switches V751A8041KZ00000 |
| 0 | ||
| V2B1B804-1KZMG-100 | Carling Technologies | Rocker Switches V2B1B8041KZMG100 RoHS : Compliant |
| 0 | ||
| 70F3-18-04-1-C | TE Connectivity | Circular MIL Spec Backshells 70F3-18-04-1-C | 0 | |||
| 0732880410 | Molex | 1500 PF 4/40 RESIN EMI FILTER |
| 0 | ||
| CA1-B0-24-480-412-FG | Carling Technologies | Circuit Breakers CA1B024480412FG RoHS : Compliant | 0 | |||
| 7708308041 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 8-1768041-1 | TE Connectivity | Wire Labels & Markers STD02Y-F RoHS : Compliant |
| 0 | ||
![]() TME | 80412001 | Spelsberg els UK Ltd | Enclosure: junction box; X: 102mm; Y: 102mm; Z: 57mm; IP66; white |
| 60 | |
TUSB8041RGCT![]() | Texas Instruments | IC: USB interface; GPIO,I2C,SMBus,USB; HUB controller; 28mA RoHS : Compliant |
| 0 | ||
| 096R080418Z | FATH | Rhombus nut; for profiles; Width of the groove: 8mm; steel; zinc |
| 0 | ||
| 28041 | HELUKABEL | Wire; H05VV-F/SJT; 5x15AWG; stranded; Cu; PVC; black; 300V; 15AWG RoHS : Compliant |
| 0 | ||
| 6080410 | Gedore Torque Ltd | Wrench: combination spanner; double-sided,bent; 21mm; L: 338mm |
| 0 | ||
| 7000-48041-2910080 | Murrelektronik GmbH | Cable: for sensors; PIN: 8; 0.8m; 30VDC; 30VAC; 2A; Cores: 8; PUR |
| 0 | ||
| 7000-48041-2910120 | Murrelektronik GmbH | Cable: for sensors; PIN: 8; 1.2m; 30VDC; 30VAC; 2A; Cores: 8; PUR |
| 0 | ||
| 7000-48041-2913000 | Murrelektronik GmbH | Cable: for sensors; PIN: 8; 30m; 30VDC; 30VAC; 2A; Cores: 8; PUR |
| 0 | ||
| 7000-48041-2940550 | Murrelektronik GmbH | Cable: for sensors; PIN: 8; 5.5m; 30VDC; 30VAC; 2A; Cores: 8; PUR |
| 0 | ||
| 7000-48041-2941400 | Murrelektronik GmbH | Cable: for sensors; PIN: 8; 14m; 30VDC; 30VAC; 2A; Cores: 8; PUR |
| 0 | ||
| 7000-48041-7171500 | Murrelektronik GmbH | Cable: for sensors; PIN: 8; 15m; 30VDC; 30VAC; 2A; Cores: 8; PUR |
| 0 | ||
| 78041 SL005 | Alpha Wire | Wire; EcoCable Mini®; EcoGen®; 15x22AWG; unshielded; 300V; 30.5m |
| 0 | ||
| 804126-SF | TE Connectivity | Connector: AC supply; socket; male; Inom: 15A; Ir: 310uA; 250VAC RoHS : Compliant |
| 0 | ||
| 804130-SF | TE Connectivity | Connector: AC supply; socket; male; Inom: 8A; Ir: 310uA; 250VAC RoHS : Compliant |
| 0 | ||
| 804167-SF | TE Connectivity | Connector: AC supply; socket; male; Inom: 12A; Ir: 310uA; 250VAC RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | KSZ8041NLI-TR | Microchip Technology Inc | KSZ8041 Series 3.465 V Physical Layer Transceiver 10/100BASE-T/TX - MLF-32 RoHS : Compliant | 13,974 | ||
![]() ComSIT USA | KSZ8041FTLI | AVAILABLE EU | 92 | |||
![]() ComSIT USA | KSZ8041NLITR![]() | Micrel Inc | IC INTERFACE Transceiver Ethernet, PHY 10Mbps, 100Mbps 3.135V - 3.465V 32-QFN T/R RoHS : Not Compliant | 45,345 | ||
| KSZ8041MLLTR | Micrel Inc | 10BASE-T/100BASE-TX/100BASE-FX PHYSICAL LAYER TRANSCEIVER Ethernet Transceiver, 1-Trnsvr, CMOS, PQFP48 RoHS : Compliant | 4,000 | |||
| KSZ8041NL-AM-TR | Microchip Technology Inc | IC INTERFACE Transceiver Ethernet, PHY 10Mbps, 100Mbps 3.135V - 3.465V 32-QFN T/R RoHS : Compliant | 2,360 | |||
| KSZ8041FTL | Micrel Inc | 10BASE-T/100BASE-TX/100BASE-FX PHYSICAL LAYER TRANSCEIVER Ethernet Transceiver, 1-Trnsvr, CMOS, PQFP48 RoHS : Not Compliant | 351 | |||
| 1780410000 | Weidmüller Interface GmbH & Co. KG | PCB PLUG-IN CONNECTOR Strip Terminal Block, 18.5A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 94 | |||
![]() GLYN GmbH & Co. KG | CAB-GRE-PCAP-250-CG18041901 | Great Ideal Co Ltd | PCAP USB cable, 250mm, ePC to GLYN LVDS displays | 28 | ||
| CAB-GRE-BL-250-CG18041902 | Great Ideal Co Ltd | Backlight cable, 250mm, ePC to GLYN LVDS displays | 16 | |||
![]() NexGen Digital | KSZ8041NLI | Microchip Technology Inc | RoHS : Compliant | 1,001 | ||
| KSZ8041NLI-TR | Micron Technology Inc | 626 | ||||
![]() PEI Genesis | S4731-1708-04-12 | SOURIAU-SUNBANK |
| 0 | ||
| 8298.21.2528.04.19.43.58 | Trafag Sensors and Controls |
| 0 | |||
| 3268041P2 | SOURIAU-SUNBANK |
| 0 | |||
| 171-804106-00 | Amphenol Socapex |
| 0 | |||
| 10-597878-041 | Amphenol Corporation |
| 0 | |||
| 657-1804-103F | Dialight | RoHS : Compliant |
| 0 | ||
| 171-804108-00 | Amphenol Socapex |
| 0 | |||
| 248-0098-041 | ITT Interconnect Solutions |
| 0 | |||
| C016 20H003 804 12 | Amphenol Tuchel |
| 0 | |||
| 804-1710-0331-504 | Dialight | RoHS : Not Compliant |
| 0 | ||
| RJE231880413T | Amphenol Corporation |
| 0 | |||
| S4732-2008-04-12 | SOURIAU-SUNBANK |
| 0 | |||
| SE60F2804-12N | SOURIAU-SUNBANK |
| 0 | |||
| C146-10G010-804-1 | Amphenol Tuchel |
| 0 | |||
| 171-804102-X0 | Amphenol Socapex |
| 0 | |||
![]() PUI | 12.88041 | 4,464 | ||||
| 780418 | 2 | |||||
![]() Richardson RFPD | AD8041ARZ![]() | Analog Devices Inc | Op Amp Single High Speed Amplifier R-R O/P ±6V/12V RoHS : Compliant |
| 79 | |
| 22648041 | HUBER+SUHNER | Attenuator 6GHz Single RoHS : Compliant | 0 | |||
| 135108-04-12.00 | Amphenol Corporation | RF Cable Assembly SMA Straight Jack to SMA Straigh RoHS : Compliant |
| 0 | ||
| KSZ8041NLI-TR | Microchip Technology Inc | PHY 1-CH 10Mbps/100Mbps 3.3V 32-Pin QFN EP T/R RoHS : Compliant | 0 | |||
| SI5342D-D08041-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 4 RoHS : Compliant | 0 | |||
| IPP-8041 | Innovative Power Products Inc | RF Couplers Coupling 36dB 0.5GHz to 2.5GHz SMD RoHS : Not Compliant | 0 | |||
| R411804119 | Radiall | Attenuator 8GHz RoHS : Compliant |
| 0 | ||
| 2-480416-5 | TE Connectivity | Discrete Housing For Connector RoHS : Compliant | 0 | |||
| R413804121 | Radiall | Attenuator 26.5GHz RoHS : Compliant |
| 0 | ||
| R180415007W | Radiall | RF Connector RoHS : Not Compliant |
| 0 | ||
| 85180413 | HUBER+SUHNER | SENCITY Tram MIMO Antenna RoHS : Compliant |
| 0 | ||
| AD8041-000C | Analog Devices Inc | Op Amp Single Low Power Amplifier R-R O/P ±6.3V/12 RoHS : Compliant | 0 | |||
| R413804117 | Radiall | Fixed Coaxial Attenuators 12.4GHz 4dB RoHS : Compliant |
| 0 | ||
| 901-9804-1 | Amphenol Corporation | Conn SMA 0Hz to 12.4GHz 50Ohm Solder ST Flange Mou RoHS : Compliant | 0 | |||
| SKY85804-11EK1 | Skyworks Solutions Inc | RF MW AMP EVAL BD RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 50641-8041 | Molex | INSTOCK RoHS : Compliant | 1,982,500 | ||
| 35748-0410 | Molex | INSTOCK | 1,287,000 | |||
| 502250-8041 | Molex | INSTOCK | 93,600 | |||
| 34912-8041 | Molex | INSTOCK RoHS : Compliant | 29,250 | |||
| 174804-1 | TE Connectivity | INSTOCK RoHS : Compliant | 17,114 | |||
| 180414-0113 | Molex | INSTOCK | 8,385 | |||
| 480414-00 | Murata Manufacturing Co Ltd | INSTOCK | 7,500 | |||
| 279804-1 | TE Connectivity | INSTOCK | 6,396 | |||
| KSZ8041FTLI-TR | Microchip Technology Inc | INSTOCK RoHS : Compliant | 5,000 | |||
| CMT8041W0 | INSTOCK | 1,300 | ||||
| 0804109:0001 | Phoenix Contact | INSTOCK RoHS : Compliant | 846 | |||
| KSZ8041RNL TR | INSTOCK | 430 | ||||
| 125-804-162TJS | INSTOCK | 274 | ||||
| 15-48-0412 | INSTOCK | 27 | ||||
| 174804-1 | INSTOCK | 1 | ||||
![]() Avnet Abacus | 1-480417-0 | TE Connectivity | Conn Housing RCP 1 POS Crimp ST Loose Piece (Alt: 1-480417-0) RoHS : Compliant | 66,434 | ||
| 6-1768041-4 | TE Connectivity | AMP617680414 (Alt: 6-1768041-4) RoHS : Compliant | 23,100 | |||
| 428180412 | Molex | Conn Housing Wire to Board Housing Plug 4 POS 10mm ST Panel Mount Bag (Alt: 428180412) RoHS : Compliant | 6,400 | |||
| 524180410 | Molex | PCB Receptacle BoardtoBoard Signal 2 mm 1 Rows 4 Contacts Through Hole Mount Right Angle (Alt: 524180410) RoHS : Compliant | 6,000 | |||
| M80-4141298 | Harwin | Conn Housing Datamate RCP 12 POS 2mm ST Cable Mount Bag (Alt: M80-4141298) RoHS : Compliant | 1,761 | |||
| M80-4142098 | Harwin | Conn Housing Datamate Receptacle 20 POS 2mm ST Cable Mount BulkLoose (Alt: M80-4142098) RoHS : Compliant | 1,270 | |||
| M80-4140698 | Harwin | Conn Housing Datamate RCP 6 POS 2mm ST Cable Mount Bag (Alt: M80-4140698) RoHS : Compliant | 1,172 | |||
| T4011008041-000 | TE Connectivity | Sensor Connector M8 Male 4 Positions Screw Pin Straight Cable Mount (Alt: T4011008041-000) RoHS : Compliant | 743 | |||
| 1703804-1 | TE Connectivity | Connector Accessory Fixing Slide (Alt: 1703804-1) RoHS : Compliant | 600 | |||
| T4010008041-000 | TE Connectivity | (Alt: T4010008041-000) RoHS : Compliant | 350 | |||
| 428180412 | Molex | Conn Housing Wire to Board Housing Plug 4 POS 10mm ST Panel Mount Bag (Alt: 428180412) RoHS : Compliant | 100 | |||
| M80-4102042 | Harwin | Datamate JTek DIL Female Vertical 3mm PC Tail Connector gold clip tin shell no jackscrews (Alt: M80-4102042) RoHS : Compliant | 72 | |||
| M80-4130498 | Harwin | Conn Housing Datamate RCP 4 POS 2mm ST Cable Mount Bag (Alt: M80-4130498) RoHS : Compliant | 68 | |||
| M80-4102642 | Harwin | Datamate JTek DIL Female Vertical 3mm PC Tail Connector gold clip tin shell no jackscrews (Alt: M80-4102642) RoHS : Compliant | 14 | |||
| 59804-1 | TE Connectivity | Insertion Tool 6805mm THandle MTA 156 Connectors Slotted Blade (Alt: 59804-1) RoHS : Compliant | 10 | |||
![]() Avnet Asia | 4804153004 | TE Connectivity | (Alt: 4804153004) RoHS : Compliant | 0 | ||
| B39771B8041P810 | Qualcomm RFFE Filter Products | (Alt: B39771B8041P810) RoHS : Compliant | 0 | |||
| 10163418-0412002LF | Amphenol Corporation | FCI10163418-0412002LF BTB,BERGSTAK 0.5MM (Alt: 10163418-0412002LF) RoHS : Compliant | 0 | |||
| 2528041-2 | TE Connectivity | DLF CEM TO MXIO 8X STR (2X)+ POWE ONLY (Alt: 2528041-2) RoHS : Compliant | 0 | |||
| 2528041-1 | TE Connectivity | DLF CEM TO MXIO 8X STR (2X)+ POWE ONLY (Alt: 2528041-1) RoHS : Compliant | 0 | |||
| RJE092880410H | Amphenol Corporation | MODULAR JACK - 8P8C, RIGHT ANGLE, TWO PO (Alt: RJE092880410H) RoHS : Compliant | 0 | |||
| EMI8041BMUTAG | onsemi | (Alt: EMI8041BMUTAG) RoHS : Compliant | 0 | |||
| EMI8041MUTAG | onsemi | Common Mode Filter with ESD Protection=750MHz CM Stop Band Attenuation for HDMI Interfaces Single Pair EMI Filter - Consumer Qualified. ONSSPCPRTCNIW2U6D; (Alt: EMI8041MUTAG) RoHS : Compliant | 0 | |||
| 98028-8041LF | Amphenol Corporation | Conn Housing PL 8 POS Crimp ST Cable Mount Bag (Alt: 98028-8041LF) RoHS : Compliant | 0 | |||
| RJE23-188-0413-T | Amphenol Corporation | (Alt: RJE23-188-0413-T) RoHS : Compliant | 0 | |||
| T4010008041-000 | TE Connectivity | (Alt: T4010008041-000) RoHS : Compliant | 0 | |||
| 0530480410 | Molex | (Alt: 0530480410) RoHS : Compliant | 0 | |||
| 1768041-7 | TE Connectivity | (Alt: 1768041-7) RoHS : Compliant | 0 | |||
| 0347928041 | Molex | Pin Header, 4 Contacts, 1 Row, 2 mm, Tin, Brass, PCB Header, Straight, Mini50 34792 Series, 4 A (Alt: 0347928041) RoHS : Compliant | 0 | |||
| 0009508041 | Molex | Conn Housing RCP 4 POS 3.96mm Crimp ST Bag (Alt: 0009508041) RoHS : Compliant | 0 | |||
![]() Avnet Silica | EMI8041MUTAG | onsemi | Common Mode Filter with ESD Protection750MHz CM Stop Band Attenuation for HDMI Interfaces Single Pair EMI Filter Consumer Qualified ONSSPCPRTCNIW2U6D (Alt: EMI8041MUTAG) RoHS : Compliant | 12,000 | ||
| KSZ8041NLI-TR | Microchip Technology Inc | Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V QFN 32 Pins (Alt: KSZ8041NLI-TR) RoHS : Compliant | 4,000 | |||
| KSZ8041FTLI-TR | Microchip Technology Inc | PHY 1CH 10Mbps100Mbps 48Pin TQFP TR (Alt: KSZ8041FTLI-TR) RoHS : Compliant | 2,000 | |||
| KSZ8041FTL | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin TQFP Tray (Alt: KSZ8041FTL) RoHS : Compliant | 0 | |||
| KSZ8041MLL | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin LQFP (Alt: KSZ8041MLL) RoHS : Compliant | 0 | |||
| KSZ8041TLI | Microchip Technology Inc | Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V TQFP 48 Pins (Alt: KSZ8041TLI) RoHS : Compliant | 0 | |||
| KSZ8041RNLI | Microchip Technology Inc | 10100 BASETX Physical Layer Transceiver (Alt: KSZ8041RNLI) RoHS : Compliant | 0 | |||
| ISL80410IBEZ | Renesas Electronics Corporation | (Alt: ISL80410IBEZ) RoHS : Compliant | 0 | |||
| KSZ8041TL-TR | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin TQFP TR (Alt: KSZ8041TL-TR) RoHS : Compliant | 0 | |||
| KSZ8041TLI-TR | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin TQFP TR (Alt: KSZ8041TLI-TR) RoHS : Compliant | 0 | |||
| EMI8041BMUTAG | onsemi | Common Mode Filter with ESD Protection750MHz CM Stop Band Attenuation for HDMI Interfaces Single Pair EMI Filter Consumer Qualified ONSSPCPRTCNIW2U6D (Alt: EMI8041BMUTAG) RoHS : Compliant | 0 | |||
KSZ8041MLL-TR![]() | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin LQFP TR (Alt: KSZ8041MLL-TR) RoHS : Compliant | 0 | |||
| KSZ8041RNL-TR | Microchip Technology Inc | PHY 1CH 100Mbps 32Pin QFN TR (Alt: KSZ8041RNL-TR) RoHS : Compliant | 0 | |||
| KSZ8041NLJ-TR | Microchip Technology Inc | 10100 BASETX PHYSICAL LAYER TRANSCEIVER (Alt: KSZ8041NLJ-TR) RoHS : Compliant | 0 | |||
KSZ8041RNLI-TR![]() | Microchip Technology Inc | PHY 1CH 100Mbps 32Pin QFN TR (Alt: KSZ8041RNLI-TR) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | SW350804-1 | DB Unlimited | Waterproof Dynamic Speaker |
| 0 | |
![]() DB Roberts | 8041 | Heyco | 8041-000 (SWITCH BUS BAR #3691 | 0 | ||
| 304818041152 | Essentra Components | 0 | ||||
| 301518041152 | Essentra Components | 0 | ||||
| 38-108-04-16 | Southco | Create high-strength permanent bonding of diverse materials such as metal wood and masonry in through-hole and blind-hole applications with affordable Southco Drive Rivets. Easy installation and removal make Drive Rivets an easy choice for field wo | 0 | |||
| 304308041152 | Essentra Components | 0 | ||||
| 16CW008041 | Essentra Components | CUPPED WASHER, 8 SCREW, .171 I | 0 | |||
| SSG-804-17 | SHEREX FASTENING SO | 0 | ||||
| 16CW008041B | Essentra Components | CUPPED WASHER, 8 SCREW, .171 I | 0 | |||
| 304318041152 | Essentra Components | 0 | ||||
| 304408041152 | Essentra Components | 0 | ||||
| CN-80-4-1 | Southco | These robust modules satisfy requirements of the AdvancedTCA� Base Specification for telecom applications including the drop test without additional support components. And multiple keying configurations provide any plug-in circuit board application wit | 0 | |||
| SSG-804-18 | SHEREX FASTENING SO | 0 | ||||
| 3BT-P8041-00 | Acumnet / Camcar | 832X5/8 TX PAN HD CREST CUP ZI | 0 | |||
| 301318041152 | Essentra Components | 0 | ||||
| 301408041152 | Essentra Components | 0 | ||||
![]() EBV Elektronik | KSZ8041NLI-TR | Microchip Technology Inc | Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V QFN 32 Pins (Alt: KSZ8041NLI-TR) RoHS : Compliant | 2,000 | ||
| KSZ8041FTLI | Microchip Technology Inc | Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V TQFP 48 Pins (Alt: KSZ8041FTLI) RoHS : Compliant | 1,000 | |||
| KSZ8041FTL | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin TQFP Tray (Alt: KSZ8041FTL) RoHS : Compliant | 0 | |||
| KSZ8041TLI | Microchip Technology Inc | Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V TQFP 48 Pins (Alt: KSZ8041TLI) RoHS : Compliant | 0 | |||
| KSZ8041NLI | Microchip Technology Inc | Single Chip Ethernet Physical Layer Transceiver 3135 V to 3465 V 32 Pins VQFNEP (Alt: KSZ8041NLI) RoHS : Compliant | 0 | |||
| EMI8041MUTAG | onsemi | Common Mode Filter with ESD Protection750MHz CM Stop Band Attenuation for HDMI Interfaces Single Pair EMI Filter Consumer Qualified ONSSPCPRTCNIW2U6D (Alt: EMI8041MUTAG) RoHS : Compliant | 0 | |||
| KSZ8041TLI-TR | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin TQFP TR (Alt: KSZ8041TLI-TR) RoHS : Compliant | 0 | |||
| EMI8041BMUTAG | onsemi | Common Mode Filter with ESD Protection750MHz CM Stop Band Attenuation for HDMI Interfaces Single Pair EMI Filter Consumer Qualified ONSSPCPRTCNIW2U6D (Alt: EMI8041BMUTAG) RoHS : Compliant | 0 | |||
KSZ8041MLL-TR![]() | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin LQFP TR (Alt: KSZ8041MLL-TR) RoHS : Compliant | 0 | |||
| KSZ8041RNL-TR | Microchip Technology Inc | PHY 1CH 100Mbps 32Pin QFN TR (Alt: KSZ8041RNL-TR) RoHS : Compliant | 0 | |||
KSZ8041RNLI-TR![]() | Microchip Technology Inc | PHY 1CH 100Mbps 32Pin QFN TR (Alt: KSZ8041RNLI-TR) RoHS : Compliant | 0 | |||
| SGM8041YN5G/TR | SG Micro Corp | (Alt: SGM8041YN5G/TR) RoHS : Compliant | 0 | |||
| SGM3804-1YG/TR | SG Micro Corp | Single Inductor PositiveNegative Dual Output BuckBoost Converter (Alt: SGM3804-1YG/TR) RoHS : Compliant | 0 | |||
| KSZ8041FTLI-TR | Microchip Technology Inc | PHY 1CH 10Mbps100Mbps 48Pin TQFP TR (Alt: KSZ8041FTLI-TR) RoHS : Compliant | 0 | |||
| SGM8041YMS8G/TR | SG Micro Corp | (Alt: SGM8041YMS8G/TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | EMI8041MUTAG | onsemi | Stock, Ship Today RoHS : Compliant |
| 185,780 | |
![]() Maritex | 530480410 | Molex | Male Pin Headers; 530480410; MOLEX; 1; Tin; 4; 4 |
| 11,708 | |
| 10144518-041802LF | Amphenol Corporation | Board Stacking Connectors; 10144518-041802LF; AMPHENOL; 2; 500 mA; Yes; 60 m? |
| 3,600 | ||
AD8041ARZ-REEL7![]() | Analog Devices Inc | Operational Amplifiers; AD8041ARZ-REEL7; ANALOG DEVICES; 7 mV; 8; 12 V; 1 RoHS : Compliant |
| 457 | ||
| KSZ8041NLI-TR | Microchip Technology Inc | Ethernet PHY ICs; KSZ8041NLI-TR; MICROCHIP TECHNOLOGY; 100 Mbps; 32; 3.135 V; 3.465 V RoHS : Compliant |
| 16 | ||
![]() Master Electronics | 50641-8041 | Molex | Contact SKT Crimp ST Cable Mount 28-30AWG PanelMate™ Reel RoHS : Compliant |
| 850,075 | |
| 0804109:0001 | Phoenix Contact | Marker card - self-adhesive - horizontally labeled with the consecutive numbers: 1 ... 10 - 10-section marker strips with 14 identical decades - white RoHS : Compliant |
| 231 | ||
| M80-4140698 | Harwin | Wtb Housing Connector 6Pos 2Row 2Mm Rohs Compliant: Yes |Harwin M80-4140698 RoHS : Compliant |
| 185 | ||
| 2804-102 | HH Smith | Spring Loaded Binding Post - 6-32 Thread - #6 Mounting Hole - 3/4 Stud Length - Red. RoHS : Compliant |
| 68 | ||
| 480416-2 | TE Connectivity | 250 FASTON HSG. REC 1P BLACK RoHS : Compliant |
| 41 | ||
| 1-480418-3 | TE Connectivity | 205 FASTON HSG. REC. 1 POS NATRUAL MOQ Reduction RoHS : Compliant |
| 0 | ||
0804197![]() | Phoenix Contact | Label - highly flexible - Roll - blue - unlabeled - can be labeled with: THERMOMARK ROLLMASTER 300/600 - THERMOMARK X1.2 - THERMOMARK ROLL X1 - THERMOMARK ROLL 2.0 - THERMOMARK ROLL - mounting type: adhesive - lettering field size: 108 x 48000 mm - Number of individual labels: 1 RoHS : Compliant |
| 0 | ||
| V751A804-1KZ00-000 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| V2B1B804-1KZMG-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| 80-6108-0419-9 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| CA1-B0-24-480-412-FG | Carling Technologies | CA1B024480412FG RoHS : Compliant |
| 0 | ||
| 8-1768041-1 | TE Connectivity | STD02Y-F RoHS : Compliant |
| 0 | ||
| 80-6108-0411-6 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| M39016/18-041P | TE Connectivity | Military/Aerospace High Performance Relays MOQ Reduction RoHS : Compliant |
| 0 | ||
| ECUE-08-041-T2-FF-01-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 0804160 | Phoenix Contact | AC Power Entry Modules EO-AB/UT/LED/S/15 RoHS : Compliant |
| 50 | |
| 0804109:0001 | Phoenix Contact | Marker Card for Terminal Blocks, SK 3,81/2,8 FORTL.ZAHLEN 1-10, Single Card Per Sale RoHS : Compliant |
| 50 | ||
| 0804183:0011 | Phoenix Contact | Marker card for terminal blocks 5mm W, White, horiz 11-20, Vert 12 identical decades, SK 5/3,8:FORTL.ZAHLEN 11-20, Price per card RoHS : Compliant |
| 50 | ||
| 2708041 | Phoenix Contact | Repeater, 3-way isolation, rail-mountable, PSM-ME-REP-LON485-P RoHS : Compliant |
| 50 | ||
| 1780410000 | Weidmüller Interface GmbH & Co. KG | Fixed Terminal Blocks 5.08HC/02/90LF3.2SN RoHS : Compliant |
| 50 | ||
| 7000-08041-2100500 | Murrelektronik GmbH | Circular DIN Connectors M8 female 0 with cable, PVC 3x0.25 gy UL/CSA 5m RoHS : Compliant |
| 50 | ||
| 7000-08041-6100500 | Murrelektronik GmbH | Cable, M8 Female 0 Degree A-Coded, 3-Pole, Pvc Cable, 3 Wires, 5 Meters, Black RoHS : Compliant |
| 43 | ||
| 19127080411 | HARTING Technology Group | Heavy Duty Power Connectors Han Compact-gg M25-SW-Metal RoHS : Compliant |
| 30 | ||
| 7000-18041-0160500 | Murrelektronik GmbH | Sensor Cables / Actuator Cables MSUD VALVE PLUG FORM A 18MM, PVC 3X0.75 YELLOW, 5m RoHS : Compliant |
| 10 | ||
| 657-1804-103F | Dialight | LED Panel Mount Indicators Blue 125fL 24V Flat Lens RoHS : Compliant |
| 6 | ||
| 2480410000 | Weidmüller Interface GmbH & Co. KG | Circuit Breakers MCB 1077 2P C 30A ACDC |
| 4 | ||
| 09931080415 | HARTING Technology Group | Specialized Cables AEF HV Hybrid Cable Assembly, 480VAC Connecting Cable, 50mm , 5m |
| 4 | ||
| 0804115 | Phoenix Contact | Industrial Surge Protectors EO-K/UT/LED RoHS : Compliant |
| 0 | ||
| 0804109:0091 | Phoenix Contact | Terminal Block Tools & Accessories SK 3,81/2,8 FORTL.ZAHLEN 91-1 |
| 0 | ||
| 38041 | Altech Corporation | Circuit Breaker; Therm/Mag; Handle; 3A 3 Pole 480Y/277 VAC Z; UL1059 Series |
| 0 | ||
![]() Pasternack Enterprises US | PE37804-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SHV Plug to Straight Cut Lead Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly SHV plug to straight cut lead cable 12 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug to straight cut lead cable 12 inch length using RG58 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and straight cut lead cable connection on the other. Our SHV to straight cut lead cable assemblies have a plug gender on end 1 and sexless on end 2. PE37804-12 can also be known as a SHV male to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SHV male to straight cut lead sexless cable assembly PE37804-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV plug to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37804-12 can also be used in the other direction and will be straight cut lead sexless to SHV plug cable assembly if the opposite connectivity is required. SHV male to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to straight cut lead cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV plug to straight cut lead cable 12 inch length using RG58 coax. |
| 3,760 | |
| PE33804-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female to N Male Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly SMA female to N male cable 12 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to N male cable 12 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our SMA to type N cable assembly has a female gender on end 1 and a male on end 2. PE33804-12 can also be known as a SMA jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE33804-12 RF cable has a PVC jacket of 0.210-inch diameter. The flexible RF cable has a between series connection. SMA jack to type N plug cable assembly PE33804-12 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33804-12 can also be used in the other direction and will be a type N male to SMA female cable assembly if the opposite connectivity is required. SMA jack to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 806 | ||
| PE3C9804-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 12 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 12 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 12 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C9804-12 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C9804-12 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable 12 inch length using TCOM-240 coax with Times Microwave components. |
| 254 | ||
| PE3C7804-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female to Straight Cut Lead Cable 12 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female to straight cut lead cable 12 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to straight cut lead cable 12 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a straight cut lead cable connection on the other. Our SMP to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C7804-12 can also be known as a SMP jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. SMP jack to straight cut lead sexless cable assembly PE3C7804-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7804-12 can also be used in the other direction and will be a straight cut lead sexless to SMP female cable assembly if the opposite connectivity is required. SMP jack to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to straight cut lead cable assembly for quick shipment worldwide. Variations of SMP and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to Straight Cut Lead RF cable assembly as per your requirements. |
| 211 | ||
| PE38804-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Female Bulkhead Cable 12 Inch Length Using PE-C195 Coax., Radio frequency assembly BNC male to BNC female bulkhead cable 12 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC female bulkhead cable 12 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE38804-12, can also be known as a low loss BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE38804-12 is built with PE-C195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38804-12 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female bulkhead cable 12 inch length using PE-C195 coax. |
| 166 | ||
| PE3C7804-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female to Straight Cut Lead Cable 18 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female to straight cut lead cable 18 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to straight cut lead cable 18 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a straight cut lead cable connection on the other. Our SMP to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C7804-18 can also be known as a SMP jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. SMP jack to straight cut lead sexless cable assembly PE3C7804-18 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7804-18 can also be used in the other direction and will be a straight cut lead sexless to SMP female cable assembly if the opposite connectivity is required. SMP jack to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to straight cut lead cable assembly for quick shipment worldwide. Variations of SMP and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to Straight Cut Lead RF cable assembly as per your requirements. |
| 140 | ||
| PE3C8041-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable 50 CM Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041-50CM can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041-50CM can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax. |
| 0 | ||
| PE3C8041-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041-24 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041-24 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax. |
| 0 | ||
| PE3C8041-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041-12 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041-12 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax. |
| 0 | ||
| PE48041 | Pasternack Enterprises |
| 0 | |||
| PE3C8041-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041-36 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041-36 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax. |
| 0 | ||
| PE3C8041-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041-60 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041-60 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax. |
| 0 | ||
| PE38041 | Pasternack Enterprises | 0 | ||||
| PE3C8041 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable using SPP-250-LLPL coax. | 0 | |||
| PE3W08041 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMC Plug to MCX Plug Cable Using RG188 Coax. PE3W08041 is a SMC plug to MCX plug cable using RG188 coax. This Pasternack SMC plug to MCX plug cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm MCX for connector 2. Our plug SMC to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08041 SMC plug to MCX plug cable assembly is constructed with RG188 coax. | 0 | |||
![]() TE Connectivity | 1-480417-0 | TE Connectivity | 110 FASTON HSG.,REC.,1 POS,NATRUAL Terminal Type: Receptacle Number of Positions: 1 Terminal Orientation: Straight Primary Product Color: Natural Connector & Housing Type: Receptacle Receptacle 1 Straight Natural | Crimp Terminal Housing | Part Number: 1-480417-0 | Internal Number: 1-480417-0 | TE Connectivity RoHS : Compliant |
| 24,369 | |
| 2238041-1 | TE Connectivity | 187 FASTON,FLAG,REC.,20-16 AWG,NPST Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | Part Number: 2238041-1 | Internal Number: 2238041-1 | TE Connectivity RoHS : Compliant |
| 17,071 | ||
| 174804-1 | TE Connectivity | M-N-L PIN HDR W/FIX BELT H 4P PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Right Angle Wire-to-Board 4 | PCB Header & Receptacle | Part Number: 174804-1 | Internal Number: 174804-1 | TE Connectivity RoHS : Compliant |
| 3,284 | ||
| T4010008041-000 | TE Connectivity | M8,SCREW, FEMALE,S,UNSHIELD,4P,GOLD Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Receptacle Number of Positions: 4 Circular Connector Shell Size: 12 Sealable: Yes Cable-to-Cable Circular Connector Receptacle 4 12 | M8 Field Installable | Part Number: T4010008041-000 | Internal Number: T4010008041-000 | TE Connectivity RoHS : Compliant |
| 1,958 | ||
| T4011008041-000 | TE Connectivity | M8,SCREW, MALE,S,UNSHIELD,4P,GOLD Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 4 Circular Connector Shell Size: 12 Sealable: Yes Cable-to-Cable Circular Connector Plug 4 12 | M8 Field Installable | Part Number: T4011008041-000 | Internal Number: T4011008041-000 | TE Connectivity RoHS : Compliant |
| 1,937 | ||
| 480415-002 | TE Connectivity | 10599-22-9 Cable Type: Cheminax Impedance: 70 Ω Wire Size: 22 AWG Operating Temperature Range: -65 – 200 °C Operating Temperature Range: -85 – 392 °F Cheminax 70 Ω | High Speed Data & Digital Coaxial Cable | Part Number: 480415-002 | Internal Number: 480415-002 | Alias Number: 6-1193596-2 | 22 AWG | TE Connectivity RoHS : Compliant |
| 1,443 | ||
| 1703804-1 | TE Connectivity | SLIDE,FOR TAB HOUSING, 15POS. Primary Product Color: Red Primary Product Material: PBT GF Automotive Connector Accessory Type: Mounting Clip Operating Temperature Range: -40 – 120 °C Operating Temperature Range: -40 – 248 °F Red PBT GF | Leavyseal Locking Slide | Part Number: 1703804-1 | Internal Number: 1703804-1 | TE Connectivity RoHS : Compliant |
| 547 | ||
| T4013008041-000 | TE Connectivity | M8,SCREW, MALE,R/A,UNSHIELD,4P,GOLD Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 4 Circular Connector Shell Size: 12 Sealable: Yes Cable-to-Cable Circular Connector Plug 4 12 | M8 Field Installable | Part Number: T4013008041-000 | Internal Number: T4013008041-000 | TE Connectivity RoHS : Compliant |
| 365 | ||
| T4012008041-000 | TE Connectivity | M8,SCREW, FEMALE,R/A,UNSHIELD,4P,GOLD Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Receptacle Number of Positions: 4 Circular Connector Shell Size: 12 Sealable: Yes Cable-to-Cable Circular Connector Receptacle 4 12 | M8 Field Installable | Part Number: T4012008041-000 | Internal Number: T4012008041-000 | TE Connectivity RoHS : Compliant |
| 116 | ||
| 59804-1 | TE Connectivity | MAINTENANCE TOOL Insertion & Extraction Tool Type: Contact Extraction Insertion & Extraction Tool Application: Contact-to-Wire Contact Extraction Contact-to-Wire | Insertion And Extraction Tool | Part Number: 59804-1 | Internal Number: 59804-1 | TE Connectivity RoHS : Compliant |
| 116 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |