| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
8041F8HKP nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() TME | 9-1768041-6 | TE Connectivity | Marker: cable; Marking: N; POM; yellow; STD; -40÷106°C RoHS : Compliant |
| 12,600 | |
| C01610D00680412 | Amphenol Corporation | C01610D00680412 |
| 600 | ||
| SGM8041YN5G/TR | SG Micro Corp | IC: operational amplifier; 14.5kHz; Ch: 1; 1.4÷5.5VDC; SOT23-5 |
| 170 | ||
| BTD3-08-04-1-ZB-SB | TE Connectivity | Enclosure for connectors: D-Sub; angled RoHS : Compliant |
| 62 | ||
| LCTB-1408041000A55 | LUMEL SA | Transformer: current; LCTB; I AC: 1kA; 30VA; Body dim: 155x140x45mm |
| 5 | ||
| BM80412 | BM Group spa | Crimping tool: cable terminals-set; insulated connectors |
| 2 | ||
| BTM1-08-04-1-B-SB | TE Connectivity | BTM1-08-04-1-B-SB |
| 2 | ||
| C14610G0068041 | Amphenol Corporation | Enclosure for connectors: HDC; size E6; for cable; with latch |
| 0 | ||
| BM80411 | BM Group spa | Crimping tool: cable terminals-set; insulated connectors; box |
| 0 | ||
| LCTS 1558041000A15 | LUMEL SA | Transformer: current; Iin: 1kA; Iout: 1A; for bus bar; 0.5@max10VA |
| 0 | ||
| LCTS 1558041500A51 | LUMEL SA | Transformer: current; Iin: 1.5kA; Iout: 5A; for bus bar; 1@max45VA |
| 0 | ||
| M80-4131698 | Harwin | Accessories: plug case; female; Datamate; PIN: 16; Datamate J-Tek RoHS : Compliant |
| 0 | ||
| M80-4132098 | Harwin | Accessories: plug case; female; Datamate; PIN: 20; Datamate J-Tek RoHS : Compliant |
| 0 | ||
| M80-4143898 | Harwin | Accessories: plug case; female; Datamate; PIN: 38; Datamate J-Tek RoHS : Compliant |
| 0 | ||
| M80-4144298 | Harwin | Accessories: plug case; female; Datamate; PIN: 42; Datamate J-Tek RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 53048-0410 | Molex | Pin Header, 4 Contacts, 1 Row, 1.25mm, Matte Tin, 1A, Right Angle, Shrouded, Phosphor Bronze, THT RA - Trays (Alt: 0530480410) RoHS : Compliant |
| 99,950 | |
| EMI8041MUTAG | onsemi | Common Mode Filter with ESD Protection - Tape and Reel (Alt: EMI8041MUTAG) RoHS : Compliant |
| 42,000 | ||
| 09-50-8041 | Molex | - Bulk (Alt: 0009508041) RoHS : Compliant |
| 5,029 | ||
| RJE231880413T | Amphenol Corporation | RJ45 Connector Receptacle 8 Position 1 Port Right Angle Surface Mount T/R - Tape and Reel (Alt: RJE231880413T) RoHS : Not Compliant |
| 2,800 | ||
| 215958-0416 | Molex | 32CKT HYB HSD_ASSY BLADE HSG KEY F - Bulk (Alt: 2159580416) RoHS : Compliant |
| 336 | ||
| 42818-0412 | Molex | - Bulk (Alt: 0428180412) RoHS : Compliant |
| 15 | ||
| 20026680-41 | TE Connectivity | Pressure Transmitter, IoT Wireless, Compound, BSPP, 0 bar, 35 bar, 1/4", Connector" - Bulk (Alt: 20026680-41) RoHS : Not Compliant |
| 10 | ||
| 59804-1 | TE Connectivity | Insertion Tool, 68.05mm, T-Handle, MTA .156" Connectors, Slotted Blade" - Bag (Alt: 59804-1) RoHS : Not Compliant |
| 1 | ||
| 212528-0410 | Molex | MICROFIT+ DR RA HDR SN 4CKT POL-B NAT - Bulk (Alt: 2125280410) RoHS : Compliant |
| 0 | ||
| 1768041-2 | TE Connectivity | Cable Marker Pre-Printed Snap-On "9" Legend Polyoxymethylene Yellow Box - Boxed Product (Development Kits) (Alt: 1768041-2) RoHS : Compliant |
| 0 | ||
| 3-1768041-6 | TE Connectivity | Cable Marker Pre-Printed Snap-On "Q" Legend Polyoxymethylene Yellow Strip - Boxed Product (Development Kits) (Alt: 3-1768041-6) RoHS : Compliant |
| 0 | ||
| C14610G0168041F | Amphenol Corporation | Hood with Single Locking Lever for Heavymate Housing - Boxed Product (Development Kits) (Alt: C14610G0168041F) RoHS : Compliant |
| 0 | ||
| XC2VE3804-1MSESSVA2112 | AMD | System On Chip Processor, ARM Cortex-A78AE/ARM Cortex-R52, 1.8 GHz, 2112 Pins, SFBGA - Trays (Alt: XC2VE3804-1MSESSVA2112) RoHS : Compliant |
| 0 | ||
| RN60C8041FB14 | Vishay Intertechnologies | - Bulk (Alt: RN60C8041FB14) RoHS : Not Compliant |
| 0 | ||
| RJE021880410 | Amphenol Corporation | - Trays (Alt: RJE021880410) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 1-480417-0 | TE Connectivity | Housing, Faston, 0.79Mm, 1Way; |Te Connectivity Amp 1-480417-0 RoHS : Compliant |
| 23,897 | |
| 10142708-04100LF | Amphenol Communications Solutions | Wtb Conn, Header, 4Pos, 2Row, 5.7Mm; |Amphenol Communications Solutions 10142708-04100LF RoHS : Compliant |
| 1,839 | ||
| M80-4140898 | Harwin | Conn Housing, Rcpt, 8Pos, 2Mm, Green; |Harwin M80-4140898 RoHS : Compliant |
| 1,753 | ||
| 019.28.041 | ETTINGER | Terminal, Pc Quickfit, 1.2Mm; |Ettinger 019.28.041 RoHS : Compliant |
| 1,665 | ||
| 8041 | Videk Ltd | Port Saver, D, 9Way; |Videk 8041 RoHS : Compliant |
| 1,242 | ||
| RJE021880410 | Amphenol Communications Solutions | Rj45 Conn, R/A Jack, 8P8C, 1Port, Th; |Amphenol Communications Solutions RJE021880410 RoHS : Compliant |
| 1,080 | ||
| RJE021880410 | Amphenol Communications Solutions | Rj45 Conn, R/A Jack, 8P8C, 1Port, Th; Modular Connector Type:Rj45 Jack; Port Configuration:1 X 1 (Port); No. Of Positions/Loaded Contacts (Per Port):8P8C; Lan Category:-; Ip Rating:-; Connector Mounting:Through Hole Mount Rohs Compliant: Yes RoHS : Compliant |
| 1,080 | ||
| 2434804-1 | TE Connectivity | Tactile Switch, 0.05A, 12Vdc, Smd, 360Gf; Product Range:-; Actuator Orientation:Top Actuated; Switch Mounting:Surface Mount; Actuator Style:Square Button; Actuating Force:360Gf; Contact Rating:50Ma At 12Vdc; Ip Rating:Ip40 Rohs Compliant: Yes RoHS : Compliant |
| 975 | ||
| M80-4141498 | Harwin | Wtb Housing Connector, 14Pos, 2Row, 2Mm; |Harwin M80-4141498 RoHS : Compliant |
| 157 | ||
| M80-4173098 | Harwin | Wtb Housing Connector, 30Pos, 2Row, 2Mm; |Harwin M80-4173098 RoHS : Compliant |
| 128 | ||
| M80-4140898 | Harwin | 4+4 Pos. Female Dil Cable Housing, Jackscrews Rohs Compliant: Yes |Harwin M80-4140898 RoHS : Compliant |
| 98 | ||
| M80-4144298 | Harwin | Wtb Housing Connector, 42Pos, 2Row, 2Mm; |Harwin M80-4144298 RoHS : Compliant |
| 48 | ||
| 108041 | raaco AS | Box, General Purpose Storage; |Raaco 108041 (Alternate Part Number: 5733439108041 RoHS : Not Compliant |
| 37 | ||
| G280416G060 | nVent Hoffman | Enclosure Cooling, Remote Access Control; |Nvent Hoffman G280416G060 RoHS : Compliant |
| 5 | ||
| 2480410000 | Weidmüller Interface GmbH & Co. KG | Supplementary Ckt Breaker, 2 Pole, 30A; Product Range:Mcb 1077 Series; Current Rating:30A; No. Of Poles:2 Pole; Voltage Rating Vdc:125V; Voltage Rating Vac:415V; Circuit Breaker Mounting:Din Rail Rohs Compliant: Yes |Weidmuller 2480410000 RoHS : Compliant |
| 4 | ||
![]() RS | 80412-W | Leviton Manufacturing Co | WH WP 4G DEC STD SIZE |
| 101 | |
| 80411-NGY | Leviton Manufacturing Co | GY WP 3G STD SIZE DEC W/SCR |
| 99 | ||
| NWT-8041 | Quest Technology International Inc | 4IN 18 LB BLACK NYLON CABLE TIE 100 PACK |
| 59 | ||
| 931804100 | Altech Corporation | TEST SOCKET ADAPTER KUN 30 BLACK 4MM TEST ADAPTER SOLDER TERMINAL 16A |
| 24 | ||
| 42818-0412 (428180412) | Molex | MINI-FIT SR. SERIES 10MM PITCH 4 WAY 1 ROW MALE STRAIGHT PCB HOUSING 42818 |
| 16 | ||
| LMBWLS27T (804163) | Banner Engineering Corp | LIGHTING, ACCESSORIES LIGHTING, BRACKETS |
| 10 | ||
| 0804159 | Phoenix Contact | SOCKET PIN CONNECTOR PATTERN TYPE AB 15A SCREW CONNECTION FOR USA RoHS : Compliant |
| 7 | ||
| 0804174 | Phoenix Contact | SOCKET PIN CONNECTOR PATTERN TYPE AB 15A PUSH-IN SPRING CONNECTION FOR US RoHS : Compliant |
| 5 | ||
| 7000-08041-6301000 | Murrelektronik GmbH | M8 FEMALE WITH CABLE, PUR 3X0.25 BK UL/CSA+DRAG CHAIN 10M RoHS : Compliant |
| 5 | ||
| 80-4188 | Eaton Cutler-Hammer | TERMINAL LUG |
| 4 | ||
| K30APT2XWF2Q (804188) | Banner Engineering Corp | TOUCH SWITCH, LED, GENERAL PURPOSE, WHITE, PNP, 4 PIN QD, IP67, K30 SERIES |
| 4 | ||
| B33-80-417 | Brady Worldwide Inc | B33 SELF-LAMINATING VINYL WIRE WRAPS, .75"H X .5'W, WHITE/CLEAR |
| 1 | ||
| 7448041104 | Wurth Elektronik | COMMON MODE CHOKE WE-CMBNC 4MH 11A 8.5MR RoHS : Compliant |
| 1 | ||
| 7014-08041-2100750 | Murrelektronik GmbH | INDUSTRIAL CABLE ASSEMBLIES, M8 FEMALE, PIGTAIL, STRAIGHT, GRAY, 10 M, PVC RoHS : Compliant |
| 1 | ||
| 05028041001 (028041) | Wera Werk Hermann Werner GmbH & Co. KG | 300 7 IP/0.9 TAMPERPROOF, TORQUE-INDICATOR SERIES |
| 1 | ||
![]() Bisco Industries | 5804-191-1 | Seastrom Mfg | 4,492 | |||
| 10039804-107 | MISC. SPACERS/STANDOFFS/HANDLES | 4,023 | ||||
| M38527/08-041P | Micro Dimensional Products Inc | 500 | ||||
| 5804-170-1 | Seastrom Mfg | 200 | ||||
| 5804-146-1 | Seastrom Mfg | 198 | ||||
| 5804-115-2 | Seastrom Mfg | 100 | ||||
| 5804-10-2 | Seastrom Mfg | 75 | ||||
| 5804-116-2 | Seastrom Mfg | 73 | ||||
| 804-144 | Zierick Manufacturing Corporation | RoHS : Compliant | 38 | |||
| 1-480417-0 | TE Connectivity | RoHS : Compliant | 25 | |||
| 68-04-1200 | SOCKET SCREWS | 23 | ||||
| 8041-440-SS-20 | RAF Electronic Hardware | 21 | ||||
| 243-8041 | ept Connectors | RoHS : Compliant | 13 | |||
| 1651804-1 | MISCELLANEOUS | 13 | ||||
| 7448041104 | MISCELLANEOUS | 3 | ||||
![]() Rochester Electronics | LA78041-E | onsemi | Video Processor Controller Consumer Video TO-220-7 Tube RoHS : Compliant |
| 75 | |
| EMI8041BMUTAG | onsemi | Common Mode Filter with ESD Protection 750MHz Stop Band Attenuation for HDMI Interfaces Single Pair EMI Filter Consumer Qualified RoHS : Compliant |
| 652,831 | ||
AD8041AR![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 8000uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant |
| 4,154 | ||
AD8041ANZ![]() | Analog Devices Inc | Op Amp Standard 160MHz 8-DIP Tube RoHS : Compliant |
| 120 | ||
AD8041ARZ-REEL![]() | Analog Devices Inc | Op Amp Standard 160MHz 8-SOIC T/R RoHS : Compliant |
| 27 | ||
AD8041ARZ-REEL7![]() | Analog Devices Inc | Op Amp Standard 160MHz 8-SOIC T/R RoHS : Compliant |
| 24 | ||
AD8041AN![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 8000uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant |
| 3,591 | ||
AD8041AR-REEL7![]() | Analog Devices Inc | Op Amp Standard 160MHz 8-SOIC T/R RoHS : Not Compliant |
| 6,733 | ||
AD8041AR-REEL![]() | Analog Devices Inc | Op Amp Standard 160MHz 8-SOIC T/R RoHS : Not Compliant |
| 480 | ||
P8041AH![]() | Intel Corporation | Microcontroller, 8-Bit, MROM, 8048 CPU, 0.833MHz, NMOS, PDIP40 RoHS : Not Compliant |
| 666 | ||
| ISL80410IBEZ | Intersil Corporation | IC VOLT REG Adjustable 1 REG 2.5V 150mA 8-SOIC Tube RoHS : Compliant |
| 2 | ||
DS1804-100![]() | Maxim Integrated Products | Pot Digital 1 Element 100 POS 100 kOhm 2.7V ±20% 8-DIP Tube RoHS : Not Compliant |
| 1,446 | ||
| UPD78F8041K8(R)-9B4-E2-AX | Renesas Electronics Corporation | IC MCU 78K0R 16Bit 1 Core FLASH 64kB (64k x 8) 20MHz 56-QFN RoHS : Compliant |
| 2,494 | ||
![]() Sager | 1768041-2 | TE Connectivity | Wire Labels & Markers STD01Y-9 RoHS : Compliant |
| 0 | |
| 1804177-1 | TE Connectivity | Extraction, Removal & Insertion Tools REMOVAL CHICKLET 4PR | 0 | |||
| V4B1B804-19Z5R-300 | Carling Technologies | Rocker Switches V4B1B80419Z5R300 RoHS : Compliant |
| 0 | ||
| 0836280410 | Molex | Molex | 0 | |||
| 0861280410 | Molex | Fiber Optic Connectors | 0 | |||
| 0982680416 | Molex | FFC / FPC Jumper Cables PREMO-FLEX 1.25 JMPR LGT 102 TYPED 34CKT RoHS : Compliant |
| 0 | ||
| 1-528041-3 | TE Connectivity | Crimpers / Crimping Tools DIE SET SHIELD CRIMP HVP800 90DEG 35SQMM | 0 | |||
| 3-1768041-6 | TE Connectivity | Wire Labels & Markers STD01Y-Q RoHS : Compliant |
| 0 | ||
| 7702108041 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7705608041 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| BTF1-18-04-1-C-SB | TE Connectivity | Circular MIL Spec Backshells BTF1-18-04-1-C-SB RoHS : Compliant | 0 | |||
| BTF3-18-04-1-C-SB | TE Connectivity | Circular MIL Spec Backshells BTF3-18-04-1-C-SB RoHS : Compliant | 0 | |||
| 0521480411 | Molex | Molex | 0 | |||
| 0347928041 | Molex | Automotive Connectors MINI50 VHDR 4CKT GRY POL B T&R RoHS : Compliant |
| 0 | ||
| IEGF66-32804-15-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
![]() Ameya Holding Limited | TUSB8041ARGCR![]() | Texas Instruments | RoHS : Compliant | 21,851 | ||
AD8041ARZ-REEL7![]() | Analog Devices Inc | IC OPAMP VFB 170MHZ RRO 8SOIC RoHS : Compliant | 26 | |||
| KSZ8041TLI | Microchip Technology Inc | KSZ8041 Series 3.465 V Physical Layer Transceiver 10/100BASE-T/TX TQFP-48 RoHS : Compliant | 25 | |||
![]() ComSIT USA | KSZ8041FTLI | AVAILABLE EU | 92 | |||
![]() ComSIT USA | KSZ8041NLITR![]() | Micrel Inc | IC INTERFACE Transceiver Ethernet, PHY 10Mbps, 100Mbps 3.135V - 3.465V 32-QFN T/R RoHS : Not Compliant | 45,345 | ||
| KSZ8041MLLTR | Micrel Inc | 10BASE-T/100BASE-TX/100BASE-FX PHYSICAL LAYER TRANSCEIVER Ethernet Transceiver, 1-Trnsvr, CMOS, PQFP48 RoHS : Compliant | 4,000 | |||
| KSZ8041NL-AM-TR | Microchip Technology Inc | IC INTERFACE Transceiver Ethernet, PHY 10Mbps, 100Mbps 3.135V - 3.465V 32-QFN T/R RoHS : Compliant | 2,360 | |||
| KSZ8041FTL | Micrel Inc | 10BASE-T/100BASE-TX/100BASE-FX PHYSICAL LAYER TRANSCEIVER Ethernet Transceiver, 1-Trnsvr, CMOS, PQFP48 RoHS : Not Compliant | 351 | |||
| 1780410000 | Weidmüller Interface GmbH & Co. KG | PCB PLUG-IN CONNECTOR Strip Terminal Block, 18.5A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 94 | |||
![]() GLYN GmbH & Co. KG | CAB-GRE-PCAP-250-CG18041901 | Great Ideal Co Ltd | PCAP USB cable, 250mm, ePC to GLYN LVDS displays | 28 | ||
| CAB-GRE-BL-250-CG18041902 | Great Ideal Co Ltd | Backlight cable, 250mm, ePC to GLYN LVDS displays | 16 | |||
![]() Interstate Connecting Components | 3-1768041-6 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCSTD01Y-Q RoHS : Compliant | 0 | ||
| RJE021880410 | Amphenol Commercial | 8P8C, NO SHIELD, SINGLE PORT | 0 | |||
| RJE061880410H | Amphenol Commercial | 8P8C, VERTICAL, NO SHIELD | 0 | |||
| SK21804-1-2K1 | Amphenol Positronic | 0 | ||||
| 10131318-04121GRLF | Amphenol FCi | 10131318-04121GRLF-MTK 4.2 04P | 0 | |||
| 10142708-04100LF | Amphenol FCi | 10142708-04100LF-MTK 5.7 DR 04 | 0 | |||
| RJE051880410H | Amphenol Commercial | 8P8C, LOW PROFILE, NO SHIELD, | 0 | |||
| RJE1J1880410T | Amphenol Commercial | Modular Connectors |
| 0 | ||
| 1-480417-0 | TE Connectivity | 110 S CIR FAST HSG NAT N RoHS : Compliant |
| 0 | ||
| 10131318-041210RLF | Amphenol FCi | 10131318-041210RLF-MTK 4.2 04P | 0 | |||
| 2407804-1 | TE Connectivity | COVER,SHIPPING CAP FOR HD1400 HEADR RoHS : Compliant |
| 0 | ||
| C14610G0168041 | Amphenol Sine Systems | COUPLING HOUSING | 0 | |||
| RJE1J1880410 | Amphenol Commercial | RJE1J1880410-VT 8P8C NO SHIELD | 0 | |||
| RJE451880412 | Amphenol Commercial | 8P8C, VERTICAL, CAT6, NO SHIEL | 0 | |||
| RJE741880410A | Amphenol Commercial | 8P8C, VERTICAL, NO SHIELD, SIN | 0 | |||
![]() PEI Genesis | 171-804108-00 | Amphenol Socapex |
| 0 | ||
| S4732-2008-04-12 | SOURIAU-SUNBANK |
| 0 | |||
| 171-804101-00 | Amphenol Socapex |
| 0 | |||
| C146-21R010-804-1 | Amphenol Tuchel |
| 0 | |||
| 171-804103-X0 | Amphenol Socapex |
| 0 | |||
| 171-804102-X0 | Amphenol Socapex |
| 0 | |||
| 901-9804-1 | Amphenol RF |
| 0 | |||
| 804190 | Amphenol PCD |
| 0 | |||
| C146-10G010-804-1 | Amphenol Tuchel |
| 0 | |||
| SE60F1804-12N | SOURIAU-SUNBANK |
| 0 | |||
| RJE231880413T | Amphenol Corporation |
| 0 | |||
| C146-21R006-804-1 | Amphenol Tuchel |
| 0 | |||
| SE27C1804-1.5C-34 | SOURIAU-SUNBANK |
| 0 | |||
| 10-597878-041 | Amphenol Corporation |
| 0 | |||
| C146-10N024-804-1 | Amphenol Tuchel |
| 0 | |||
![]() PUI | 12.88041 | 3,464 | ||||
| 80-4-10 | 25 | |||||
| 780418 | 2 | |||||
![]() Chip 1 Exchange | 35748-0410 | Molex | INSTOCK | 1,287,000 | ||
| 50753-8041 | Molex | INSTOCK RoHS : Compliant | 422,500 | |||
| 53388-0410 | Molex | INSTOCK RoHS : Compliant | 414,050 | |||
| 502250-8041 | Molex | INSTOCK | 93,600 | |||
| 1-480417-0 | TE Connectivity | INSTOCK RoHS : Compliant | 12,675 | |||
| 180414-0113 | Molex | INSTOCK | 8,385 | |||
| 279804-1 | TE Connectivity | INSTOCK | 6,396 | |||
| T4010008041-A30 | TE Connectivity | INSTOCK | 4,719 | |||
| 1703804-1 | TE Connectivity | INSTOCK RoHS : Compliant | 3,272 | |||
| CMT8041W0 | INSTOCK | 1,300 | ||||
| KSZ8041TLITR | Microchip Technology Inc | INSTOCK | 1,000 | |||
| 0804109:0001 | Phoenix Contact | INSTOCK RoHS : Compliant | 846 | |||
| KSZ8041RNLTR | INSTOCK | 430 | ||||
| KSZ8041RNL TR | INSTOCK | 430 | ||||
| XS-2804-12.000MHZ 30PF + - 10P | INSTOCK | 74 | ||||
![]() Avnet Abacus | 1-480417-0 | TE Connectivity | Conn Housing RCP 1 POS Crimp ST Loose Piece (Alt: 1-480417-0) RoHS : Compliant | 66,434 | ||
| 6-1768041-4 | TE Connectivity | AMP617680414 (Alt: 6-1768041-4) RoHS : Compliant | 23,100 | |||
| 428180412 | Molex | Conn Housing Wire to Board Housing Plug 4 POS 10mm ST Panel Mount Bag (Alt: 428180412) RoHS : Compliant | 6,400 | |||
| 524180410 | Molex | PCB Receptacle BoardtoBoard Signal 2 mm 1 Rows 4 Contacts Through Hole Mount Right Angle (Alt: 524180410) RoHS : Compliant | 6,000 | |||
| M80-4141298 | Harwin | Conn Housing Datamate RCP 12 POS 2mm ST Cable Mount Bag (Alt: M80-4141298) RoHS : Compliant | 1,761 | |||
| M80-4142098 | Harwin | Conn Housing Datamate Receptacle 20 POS 2mm ST Cable Mount BulkLoose (Alt: M80-4142098) RoHS : Compliant | 1,270 | |||
| M80-4140698 | Harwin | Conn Housing Datamate RCP 6 POS 2mm ST Cable Mount Bag (Alt: M80-4140698) RoHS : Compliant | 1,172 | |||
| T4011008041-000 | TE Connectivity | Sensor Connector M8 Male 4 Positions Screw Pin Straight Cable Mount (Alt: T4011008041-000) RoHS : Compliant | 743 | |||
| 1703804-1 | TE Connectivity | Connector Accessory Fixing Slide (Alt: 1703804-1) RoHS : Compliant | 600 | |||
| T4010008041-000 | TE Connectivity | (Alt: T4010008041-000) RoHS : Compliant | 350 | |||
| 428180412 | Molex | Conn Housing Wire to Board Housing Plug 4 POS 10mm ST Panel Mount Bag (Alt: 428180412) RoHS : Compliant | 100 | |||
| M80-4102042 | Harwin | Datamate JTek DIL Female Vertical 3mm PC Tail Connector gold clip tin shell no jackscrews (Alt: M80-4102042) RoHS : Compliant | 72 | |||
| M80-4130498 | Harwin | Conn Housing Datamate RCP 4 POS 2mm ST Cable Mount Bag (Alt: M80-4130498) RoHS : Compliant | 68 | |||
| M80-4102642 | Harwin | Datamate JTek DIL Female Vertical 3mm PC Tail Connector gold clip tin shell no jackscrews (Alt: M80-4102642) RoHS : Compliant | 14 | |||
| 59804-1 | TE Connectivity | Insertion Tool 6805mm THandle MTA 156 Connectors Slotted Blade (Alt: 59804-1) RoHS : Compliant | 10 | |||
![]() Avnet Asia | 10163418-0413002LF | Amphenol Corporation | (Alt: 10163418-0413002LF) RoHS : Compliant | 0 | ||
| Q24FA20H0080411 | Epson Electronics America Inc | FA-20H 25.000000 MHZ 10.0 +20.0-20.0 (Alt: Q24FA20H0080411) RoHS : Compliant | 0 | |||
| 2528041-2 | TE Connectivity | DLF CEM TO MXIO 8X STR (2X)+ POWE ONLY (Alt: 2528041-2) RoHS : Compliant | 0 | |||
| 10163418-0412002LF | Amphenol Corporation | FCI10163418-0412002LF BTB,BERGSTAK 0.5MM (Alt: 10163418-0412002LF) RoHS : Compliant | 0 | |||
| T4010008041-000 | TE Connectivity | (Alt: T4010008041-000) RoHS : Compliant | 0 | |||
| B39771B8041P810 | Qualcomm RFFE Filter Products | (Alt: B39771B8041P810) RoHS : Compliant | 0 | |||
| RJE23-188-0413-T | Amphenol Corporation | (Alt: RJE23-188-0413-T) RoHS : Compliant | 0 | |||
| 0530480410 | Molex | (Alt: 0530480410) RoHS : Compliant | 0 | |||
| 98028-8041LF | Amphenol Corporation | (Alt: 98028-8041LF) RoHS : Compliant | 0 | |||
| RJE092880410H | Amphenol Corporation | Conn RJ45 Receptacle 16 POS Solder RA Through Hole 16 Terminal Dual Port (Alt: RJE092880410H) RoHS : Compliant | 0 | |||
| EMI8041BMUTAG | onsemi | (Alt: EMI8041BMUTAG) RoHS : Compliant | 0 | |||
| EMI8041MUTAG | onsemi | Common Mode Filter with ESD Protection (Alt: EMI8041MUTAG) RoHS : Compliant | 0 | |||
| 2528041-1 | TE Connectivity | DLF CEM TO MXIO 8X STR (2X)+ POWE ONLY (Alt: 2528041-1) RoHS : Compliant | 0 | |||
| 0347928041 | Molex | Pin Header, 4 Contacts, 1 Row, 2 mm, Tin, Brass, PCB Header, Straight, Mini50 34792 Series, 4 A (Alt: 0347928041) RoHS : Compliant | 0 | |||
| 4804153004 | TE Connectivity | (Alt: 4804153004) RoHS : Compliant | 0 | |||
![]() Avnet Silica | EMI8041MUTAG | onsemi | Common Mode Filter with ESD Protection750MHz CM Stop Band Attenuation for HDMI Interfaces Single Pair EMI Filter Consumer Qualified ONSSPCPRTCNIW2U6D (Alt: EMI8041MUTAG) RoHS : Compliant | 12,000 | ||
| KSZ8041NLI-TR | Microchip Technology Inc | Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V QFN 32 Pins (Alt: KSZ8041NLI-TR) RoHS : Compliant | 4,000 | |||
| KSZ8041FTLI-TR | Microchip Technology Inc | PHY 1CH 10Mbps100Mbps 48Pin TQFP TR (Alt: KSZ8041FTLI-TR) RoHS : Compliant | 2,000 | |||
| KSZ8041TL | Microchip Technology Inc | PHY 1CH 10Mbps100Mbps 48Pin TQFP Tray (Alt: KSZ8041TL) RoHS : Compliant | 0 | |||
| KSZ8041RNL | Microchip Technology Inc | 10100 BASETX Physical Layer Transceiver (Alt: KSZ8041RNL) RoHS : Compliant | 0 | |||
| KSZ8041FTL | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin TQFP Tray (Alt: KSZ8041FTL) RoHS : Compliant | 0 | |||
| KSZ8041TLI | Microchip Technology Inc | Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V TQFP 48 Pins (Alt: KSZ8041TLI) RoHS : Compliant | 0 | |||
| KSZ8041RNLI | Microchip Technology Inc | 10100 BASETX Physical Layer Transceiver (Alt: KSZ8041RNLI) RoHS : Compliant | 0 | |||
| KSZ8041TL-TR | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin TQFP TR (Alt: KSZ8041TL-TR) RoHS : Compliant | 0 | |||
| KSZ8041TLI-S | Microchip Technology Inc | 10100 BASETX PHYSICAL LAYER TRANSCEIVER (Alt: KSZ8041TLI-S) RoHS : Compliant | 0 | |||
| KSZ8041NLJ-TR | Microchip Technology Inc | 10100 BASETX PHYSICAL LAYER TRANSCEIVER (Alt: KSZ8041NLJ-TR) RoHS : Compliant | 0 | |||
| KSZ8041RNL-TR | Microchip Technology Inc | PHY 1CH 100Mbps 32Pin QFN TR (Alt: KSZ8041RNL-TR) RoHS : Compliant | 0 | |||
KSZ8041MLL-TR![]() | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin LQFP TR (Alt: KSZ8041MLL-TR) RoHS : Compliant | 0 | |||
| KSZ8041TLI-TR | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin TQFP TR (Alt: KSZ8041TLI-TR) RoHS : Compliant | 0 | |||
KSZ8041RNLI-TR![]() | Microchip Technology Inc | PHY 1CH 100Mbps 32Pin QFN TR (Alt: KSZ8041RNLI-TR) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | SW350804-1 | DB Unlimited | Waterproof Dynamic Speaker |
| 0 | |
![]() Component Electronics, Inc | 1680411044 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,600 | |
| MS17804-16-20 | IN STOCK SHIP TODAY |
| 703 | |||
| 804125-11 | International Components Corporation | IN STOCK SHIP TODAY |
| 661 | ||
| PE8041A-1175 | Intel Corporation | IN STOCK SHIP TODAY |
| 602 | ||
| 0009508041 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 530 | ||
AD8041AR![]() | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 149 | ||
| 8041-15G10 | TE Connectivity | IN STOCK SHIP TODAY |
| 100 | ||
| RJA-051880410 | Amphenol Corporation | IN STOCK SHIP TODAY | 98 | |||
| D8041A | Intel Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 43 | |||
| M8041-15G7 | TE Connectivity | IN STOCK SHIP TODAY |
| 38 | ||
| P8041A | Intel Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 22 | ||
| PE8041A-1033 | Intel Corporation | IN STOCK SHIP TODAY | 8 | |||
| 0747280412 | Molex | IN STOCK SHIP TODAY | 4 | |||
| 0804183-0001 | Phoenix Contact | IN STOCK SHIP TODAY |
| 3 | ||
| 318041 | Vishay Intertechnologies | IN STOCK SHIP TODAY | 2 | |||
![]() DB Roberts | 8041 | Heyco | 8041-000 (SWITCH BUS BAR #3691 | 0 | ||
| 304308041152 | Essentra Components | 0 | ||||
| 301308041152 | Essentra Components | 0 | ||||
| 8041-440-SS-20 | RAF Electronic Hardware | 0 | ||||
| 8041-440-SS | RAF Electronic Hardware | 0 | ||||
| 301618041152 | Essentra Components | 0 | ||||
| 498041 | Essentra Components | PVC GROMMET, BLACK, 12 MM HOLE | 0 | |||
| E3-1418-041 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 2804-1032-A-21 | RAF Electronic Hardware | 0 | ||||
| CN-80-4-1 | Southco | These robust modules satisfy requirements of the AdvancedTCA� Base Specification for telecom applications including the drop test without additional support components. And multiple keying configurations provide any plug-in circuit board application wit | 0 | |||
| 8041-440-A-22 | RAF Electronic Hardware | 0 | ||||
| 3BT-P8041-00 | Acumnet / Camcar | 832X5/8 TX PAN HD CREST CUP ZI | 0 | |||
| 301518041152 | Essentra Components | 0 | ||||
| 6580411301VR | Essentra Components | 0 | ||||
| 304518041556 | Essentra Components | 0 | ||||
![]() EBV Elektronik | KSZ8041NLI-TR | Microchip Technology Inc | Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V QFN 32 Pins (Alt: KSZ8041NLI-TR) RoHS : Compliant | 2,000 | ||
| KSZ8041FTLI | Microchip Technology Inc | Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V TQFP 48 Pins (Alt: KSZ8041FTLI) RoHS : Compliant | 1,000 | |||
| KSZ8041TL | Microchip Technology Inc | PHY 1CH 10Mbps100Mbps 48Pin TQFP Tray (Alt: KSZ8041TL) RoHS : Compliant | 0 | |||
| KSZ8041NLI | Microchip Technology Inc | Single Chip Ethernet Physical Layer Transceiver 3135 V to 3465 V 32 Pins VQFNEP (Alt: KSZ8041NLI) RoHS : Compliant | 0 | |||
| KSZ8041FTL | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin TQFP Tray (Alt: KSZ8041FTL) RoHS : Compliant | 0 | |||
| KSZ8041TLI | Microchip Technology Inc | Ethernet Controller PHY Transceiver IEEE 8023 IEEE 8023u 3135 V 3465 V TQFP 48 Pins (Alt: KSZ8041TLI) RoHS : Compliant | 0 | |||
| KSZ8041MLLI | Microchip Technology Inc | (Alt: KSZ8041MLLI) RoHS : Compliant | 0 | |||
| KSZ8041TL-TR | Microchip Technology Inc | PHY 1CH 100Mbps 48Pin TQFP TR (Alt: KSZ8041TL-TR) RoHS : Compliant | 0 | |||
| KSZ8041TLI-S | Microchip Technology Inc | 10100 BASETX PHYSICAL LAYER TRANSCEIVER (Alt: KSZ8041TLI-S) RoHS : Compliant | 0 | |||
| KSZ8041NLJ-TR | Microchip Technology Inc | 10100 BASETX PHYSICAL LAYER TRANSCEIVER (Alt: KSZ8041NLJ-TR) RoHS : Compliant | 0 | |||
| KSZ8041RNL-TR | Microchip Technology Inc | PHY 1CH 100Mbps 32Pin QFN TR (Alt: KSZ8041RNL-TR) RoHS : Compliant | 0 | |||
| SGM3804-1YG/TR | SG Micro Corp | Single Inductor PositiveNegative Dual Output BuckBoost Converter (Alt: SGM3804-1YG/TR) RoHS : Compliant | 0 | |||
KSZ8041RNLI-TR![]() | Microchip Technology Inc | PHY 1CH 100Mbps 32Pin QFN TR (Alt: KSZ8041RNLI-TR) RoHS : Compliant | 0 | |||
| KSZ8041FTLI-TR | Microchip Technology Inc | PHY 1CH 10Mbps100Mbps 48Pin TQFP TR (Alt: KSZ8041FTLI-TR) RoHS : Compliant | 0 | |||
| SGM804-1.63YN5G/TR | SG Micro Corp | Processor Supervisor 16707V 16V to 5V 5Pin SOT23 TR (Alt: SGM804-1.63YN5G/TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | EMI8041MUTAG | onsemi | Stock, Ship Today RoHS : Compliant | 185,780 | ||
![]() Master Electronics | 1-480417-0 | TE Connectivity | 110 FASTON HSG. REC. 1 POS NATRUAL RoHS : Compliant |
| 45,528 | |
| M80-4173098 | Harwin | Wtb Housing Connector 30Pos 2Row 2Mm Rohs Compliant: Yes |Harwin M80-4173098 RoHS : Compliant |
| 100 | ||
| M80-4184898 | Harwin | Datamate J-Tek DIL Female Crimp Connector Housing with 101Lok fixings accepts 24+24 contacts RoHS : Compliant |
| 65 | ||
| 1768041-2 | TE Connectivity | STD01Y-9 RoHS : Not Compliant |
| 0 | ||
| 1804177-1 | TE Connectivity | REMOVAL TL CHICKLET 4 PR RoHS : Compliant |
| 0 | ||
| V4B1B804-19Z5R-300 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| 3-1768041-6 | TE Connectivity | STD01Y-Q RoHS : Compliant |
| 0 | ||
| 53728-0419 | Molex | Connector HDR 4 POS 6.5mm Solder ST Thru-Hole Bag RoHS : Compliant |
| 0 | ||
| IEGF66-32804-15-V | Sensata Circuit Breakers | IEG 2 Panel Mount Lever Magnetic (Hydraulic Delay) Circuit Breaker RoHS : Compliant |
| 0 | ||
| 2-1768041-7 | TE Connectivity | STD01Y-L RoHS : Compliant |
| 0 | ||
| 010150804-10IN | TE Connectivity | 10 IN SECT. TS35/F6 DIN RAIL PUNCH RoHS : Compliant |
| 0 | ||
| MPCC-2-24-2-L-48-04.10-D-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 10142708-04100LF | Amphenol FCi | Minitek®Pwr 5.7 Vertical Through Hole Header Dual Row Black Color 4 Positions 15μin Gold (100μin Tin on Tails) plating GW Compatible LCP With Pegs Tray. RoHS : Compliant |
| 0 | ||
| 1-1768041-3 | TE Connectivity | STD01Y-DOT RoHS : Compliant |
| 0 | ||
| 0208041 | Marathon Special Products | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C7804-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMP Female to Straight Cut Lead Cable 12 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female to straight cut lead cable 12 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to straight cut lead cable 12 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a straight cut lead cable connection on the other. Our SMP to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C7804-12 can also be known as a SMP jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. SMP jack to straight cut lead sexless cable assembly PE3C7804-12 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7804-12 can also be used in the other direction and will be a straight cut lead sexless to SMP female cable assembly if the opposite connectivity is required. SMP jack to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to straight cut lead cable assembly for quick shipment worldwide. Variations of SMP and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to Straight Cut Lead RF cable assembly as per your requirements. |
| 211 | |
| PE3C7804-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female to Straight Cut Lead Cable 18 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female to straight cut lead cable 18 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to straight cut lead cable 18 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a straight cut lead cable connection on the other. Our SMP to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C7804-18 can also be known as a SMP jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. SMP jack to straight cut lead sexless cable assembly PE3C7804-18 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7804-18 can also be used in the other direction and will be a straight cut lead sexless to SMP female cable assembly if the opposite connectivity is required. SMP jack to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to straight cut lead cable assembly for quick shipment worldwide. Variations of SMP and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to Straight Cut Lead RF cable assembly as per your requirements. |
| 140 | ||
| PE3C9804-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 12 Inch Length Using TCOM-240 Coax with Times Microwave Components., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 12 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 12 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C9804-12 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C9804-12 is built with TCOM-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable 12 inch length using TCOM-240 coax with Times Microwave components. |
| 21 | ||
| PE3W08041 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMC Plug to MCX Plug Cable Using RG188 Coax. PE3W08041 is a SMC plug to MCX plug cable using RG188 coax. This Pasternack SMC plug to MCX plug cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm MCX for connector 2. Our plug SMC to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08041 SMC plug to MCX plug cable assembly is constructed with RG188 coax. | 0 | |||
| PE3C8041-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041-24 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041-24 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax. |
| 0 | ||
| PE37804-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SHV Plug to Straight Cut Lead Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly SHV plug to straight cut lead cable 12 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug to straight cut lead cable 12 inch length using RG58 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and straight cut lead cable connection on the other. Our SHV to straight cut lead cable assemblies have a plug gender on end 1 and sexless on end 2. PE37804-12 can also be known as a SHV male to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SHV male to straight cut lead sexless cable assembly PE37804-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV plug to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37804-12 can also be used in the other direction and will be straight cut lead sexless to SHV plug cable assembly if the opposite connectivity is required. SHV male to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to straight cut lead cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV plug to straight cut lead cable 12 inch length using RG58 coax. |
| 0 | ||
| PE3C8041-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041-36 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041-36 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax. |
| 0 | ||
| PE3C8041-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041-12 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041-12 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax. |
| 0 | ||
| PE38804-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Female Bulkhead Cable 12 Inch Length Using PE-C195 Coax., Radio frequency assembly BNC male to BNC female bulkhead cable 12 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC female bulkhead cable 12 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE38804-12, can also be known as a low loss BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE38804-12 is built with PE-C195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38804-12 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female bulkhead cable 12 inch length using PE-C195 coax. |
| 0 | ||
| PE33804-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female to N Male Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly SMA female to N male cable 12 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to N male cable 12 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our SMA to type N cable assembly has a female gender on end 1 and a male on end 2. PE33804-12 can also be known as a SMA jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE33804-12 RF cable has a PVC jacket of 0.210-inch diameter. The flexible RF cable has a between series connection. SMA jack to type N plug cable assembly PE33804-12 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33804-12 can also be used in the other direction and will be a type N male to SMA female cable assembly if the opposite connectivity is required. SMA jack to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8041 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable using SPP-250-LLPL coax. | 0 | |||
| PE48041 | Pasternack Enterprises |
| 0 | |||
| PE3C8041-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041-60 can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041-60 can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax. |
| 0 | ||
| PE3C8041-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.1/9.5 Mini DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Male Low PIM Cable 50 CM Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, 4.1/9.5 mini DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C8041-50CM can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA plug cable assembly PE3C8041-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8041-50CM can also be used in the other direction and will be SMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax. |
| 0 | ||
| PE38041 | Pasternack Enterprises | 0 | ||||
![]() Vyrian | M80-4132098 | Harwin PLC | Board Connector, 20 Contact(s), 2 Row(s), Female, 0.079 inch Pitch, Crimp Terminal, M2x0.4, Black Insulator | 18,536 | ||
| 7448041104 | Wurth Elektronik | Single Phase EMI Filter, 250V, 50HzHz | 15,748 | |||
| 80412500440 | Littelfuse Inc | Electric Fuse, Time Lag Blow, 2.5A, 250VAC, 150A (IR), Through Hole, TE7 RoHS : Compliant | 11,123 | |||
| SN1708041DDCT | Texas Instruments | Switching Regulator | 9,727 | |||
| 80411600440 | Littelfuse Inc | Electric Fuse, Time Lag Blow, 1.6A, 250VAC, 150A (IR), Through Hole, TE7 RoHS : Compliant | 9,570 | |||
| ACPF-8041 | Broadcom Limited | 9,492 | ||||
| 281804-1 | TE Connectivity | Combination Line Connector, 4 Contact(s), Female RoHS : Compliant | 6,256 | |||
| 80411600000 | Littelfuse Inc | Electric Fuse, Time Lag Blow, 1.6A, 250VAC, 150A (IR), Through Hole, TE7 RoHS : Compliant | 5,264 | |||
| SN74ALS804-1N3 | Texas Instruments | NAND Gate, 6-Func, 2-Input, TTL, PDIP20 RoHS : Not Compliant | 4,823 | |||
| MT52C8041C35 | Micron Technology Inc | RoHS : Not Compliant | 4,216 | |||
| SN74ALS804-1N | Texas Instruments | NAND Gate, 6-Func, 2-Input, TTL, PDIP20 RoHS : Not Compliant | 4,052 | |||
TUSB8041RGCT![]() | Texas Instruments | USB Bus Controller, CMOS, PQCC64 RoHS : Compliant | 3,639 | |||
| MT52C8041-35 | Micron Technology Inc | FIFO, 4KX8, 35ns, Asynchronous, CMOS, PDIP28 RoHS : Not Compliant | 3,051 | |||
| 2980416 | Phoenix Contact | Modular Terminal Block RoHS : Compliant | 471 | |||
| M80-4144298 | Harwin PLC | Board Connector | 436 | |||
![]() Waytek, Inc. | 820-4080-41 | Xantrex Technology Inc | Xantrex Freedom EX 4000 Inverter / Charger |
| 4 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |