| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
720HA115B nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() TME | C1720HOAAA | Bulgin | C1720HOAAA |
| 1,160 | |
| B82720H14A25 | TDK Corporation | Inductor: common mode; THT; 10mH; -30÷50%; 42VAC; Leads: radial |
| 900 | ||
| TB0720H-13-F | Diodes Incorporated | Thyristor: TSS; Urmax: 65V; SMB; SMD; 100A; bidirectional; UBO: 88V RoHS : Compliant |
| 0 | ||
| PSW-720H88 | GW Instek | Laboratory power supply: programmable; multi-channel; 800VDC |
| 0 | ||
| PSW-720H66 | GW Instek | Laboratory power supply: programmable; multi-channel; 250VDC |
| 0 | ||
| B82720H0015A035 | TDK Corporation | Inductor: wire with current compensation; THT; 68mH; 200mA RoHS : Compliant |
| 0 | ||
| 720HC | Klein Tools Inc | Cutters; tapes; Tool length: 232mm; Blade length: 76mm |
| 0 | ||
| 720 H 200 | OPTIBELT GmbH | Timing belt; H; W: 50.8mm; Lw: 1828.8mm; ZR |
| 0 | ||
| PSW-720H68 | GW Instek | Laboratory power supply: programmable; multi-channel; 250VDC |
| 0 | ||
![]() Avnet Americas | 390BA002NF2720HN | Glenair Inc | - Bulk (Alt: 390BA002NF2720HN) RoHS : Not Compliant | 0 | ||
| 380HS103M1720H6 | Glenair Inc | - Bulk (Alt: 380HS103M1720H6) RoHS : Not Compliant | 0 | |||
| XT5720H12M | Vishay Intertechnologies | - Tape and Reel (Alt: XT5720H12M) RoHS : Not Compliant |
| 0 | ||
| XT5720H20M | Vishay Intertechnologies | - Tape and Reel (Alt: XT5720H20M) RoHS : Not Compliant |
| 0 | ||
| 3882720-HR-V | Advanced Energy Industries Inc | IGA 50-LO PLUS, 3501800C, 10M FIBER RED, OPTICS I 700MM - Bag (Alt: 3882720-HR-V) RoHS : Compliant |
| 0 | ||
| BFP720H6327XTSA1 | Infineon Technologies AG | - Tape and Reel (Alt: BFP720H6327XTSA1) RoHS : Compliant | 0 | |||
| ZW-17-20-H-T-750-280 | Samtec Inc | - Bulk (Alt: ZW-17-20-H-T-750-280) RoHS : Compliant |
| 0 | ||
| L-1206MR720HBWS | Vishay Intertechnologies | L-1206 300PPM .72 3% B WS - Waffle Pack (Alt: L-1206MR720HBWS) RoHS : Not Compliant |
| 0 | ||
| B82720H15A16 | TDK Corporation | - Trays (Alt: B82720H0015A016) RoHS : Compliant |
| 0 | ||
| XT5720H18M432 | Vishay Intertechnologies | - Tape and Reel (Alt: XT5720H18M432) RoHS : Not Compliant |
| 0 | ||
| B82720H14A13 | TDK Corporation | - Trays (Alt: B82720H0014A013) RoHS : Compliant |
| 0 | ||
| B82720H15A30 | TDK Corporation | - Boxed Product (Development Kits) (Alt: B82720H0015A030) RoHS : Compliant |
| 0 | ||
| TSW-107-20-H-D-LL | Samtec Inc | Classic PCB Header Strips, 0.100" pitch - Bulk (Alt: TSW-107-20-H-D-LL) RoHS : Compliant |
| 0 | ||
| 3882720-HR-D | Advanced Energy Industries Inc | IGA 50-LO PLUS, 3501800C, 10M FIBER RED, OPTICS II 200346MM - Bag (Alt: 3882720-HR-D) RoHS : Compliant |
| 0 | ||
| XT5720H14M7456 | Vishay Intertechnologies | - Tape and Reel (Alt: XT5720H14M7456) RoHS : Not Compliant |
| 0 | ||
![]() Newark | B82720H0015A035 | TDK Corporation | Power Line Choke, Ring Core, 68Mh, 0.2A; |Tdk B82720H0015A035 RoHS : Compliant |
| 3,569 | |
| C1720HOAAD | Bulgin | Switch, Spdt, Ctr Off; |Arcolectric/bulgin Limited C1720HOAAD RoHS : Compliant |
| 834 | ||
| B82720H0015A025 | TDK Corporation | Common Mode Choke, 0.01H, 0.6A; |Tdk B82720H0015A025 RoHS : Compliant |
| 314 | ||
| BFP720H6327XTSA1 | Infineon Technologies AG | Transistor, Rf, Aec-Q101, Npn, Sot-343; |Infineon Technologies BFP720H6327XTSA1 RoHS : Compliant |
| 68 | ||
| BFP720H6327XTSA1 | Infineon Technologies AG | Transistor, Rf, Aec-Q101, Npn, Sot-343; |Infineon Technologies BFP720H6327XTSA1 RoHS : Compliant |
| 68 | ||
| 720HC | Klein Tools Inc | Scissors, First Aid, 76Mm, 232Mm, 3 "; |Klein Tools 720HC RoHS : Not Compliant |
| 0 | ||
| C1720H | Bulgin | Toggle Sw, C1720H; |Arcolectric/bulgin Limited C1720H RoHS : Not Compliant |
| 0 | ||
| PSW-720H66 | GW Instek | Bench Power Supply, Programmable; |Gw Instek PSW-720H66 RoHS : Compliant |
| 0 | ||
| PSW-720H68 | GW Instek | Bench Power Supply, Programmable; |Gw Instek PSW-720H68 RoHS : Compliant |
| 0 | ||
| PSW-720H88 | GW Instek | Bench Power Supply, Programmable; |Gw Instek PSW-720H88 RoHS : Compliant |
| 0 | ||
| B 907 20 HD | Thomas & Betts | Chnl 14Ga 1-1/2X3/4 20Ft Hdg Stl; |Abb Thomas & Betts B 907 20 HD RoHS : Not Compliant |
| 0 | ||
| 380HS103M1720H6 | Glenair Inc | Circular Connector Clamp, 17, 31.8Mm; |Glenair 380HS103M1720H6 RoHS : Compliant |
| 0 | ||
| M39003/01-5720H | Vishay Intertechnologies | 376D126X5075S2Bsh; |Vishay M39003/01-5720H RoHS : Not Compliant |
| 0 | ||
| 390BA002NF2720HN | Glenair Inc | Conn, Glenair 390Ba002Nf2720Hn; |Glenair 390BA002NF2720HN RoHS : Not Compliant |
| 0 | ||
| M39003/01-5720/HSD | Vishay Intertechnologies | 376D126X5075S2Bszx1; |Vishay M39003/01-5720/HSD RoHS : Not Compliant |
| 0 | ||
![]() RS | DA-720 HDD KIT | Moxa Inc | DA-720 HDD ACCESSORY PACKAGE |
| 2 | |
| 2453576 (25533720) (HFI808703001NA-015RS) | RS Pro | 7/8-14 X 3 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 2 | ||
| 720H300G | B&B Electronics Manufacturing Company | TIMING BELT, 3.000" BELT WIDTH, 144 TEETH, 72" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 720H150G | B&B Electronics Manufacturing Company | TIMING BELT, 1.500" BELT WIDTH, 144 TEETH, 72" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 0443720HN | Essentra Components | HEX NUT, 7/16-20 THREAD, .380 HEIGHT |
| 0 | ||
| 0443720HJN | Essentra Components | HEX JAM NUT, 7/16-20 THREAD, .250 HEIGHT |
| 0 | ||
| 67997720HLF | Amphenol FCi | 67997-720HLF-B/S II .100CC DR |
| 0 | ||
| MY1M63-720H | SMC Corporation of America | CYLINDER, RODLESS, SLIDE BEARING GUIDE TYPE, MY1 SERIES |
| 0 | ||
| MY3B32-720H6H | SMC Corporation of America | RODLESS CYLINDER, MECH JOINT, SLIDE TABLE, MY3 SERIES |
| 0 | ||
| FMD-1720-HMMTF | Bimba Manufacturing Company | CYLINDER, METRIC FLAT ONE, DBL ACT, 38MM ; STROKE: 20 MM(S); MALE THREA |
| 0 | ||
| MY1B25TN-720HZ | SMC Corporation of America | CYLINDER, RODLESS, MECH JOINT, SLIDE TABLE, MY1 SERIES |
| 0 | ||
| MLG30N-0720H50501 | SICK AG | LIGHT GRID, PRONET, 30MM, 720MM HT, ETHERNET/IP, IP69K, 5M DIST |
| 0 | ||
| MY1B32G-720HZ-M9PL | SMC Corporation of America | CYLINDER, RODLESS, MECH JOINT, SLIDE TABLE, MY1 SERIES |
| 0 | ||
| UCP207-20-AH (PER.UCP207-20HR) | PEER Bearing Company | PEER MOUNTED INSERT (MI) |
| 0 | ||
| LRX12R720PS2/HP (LRX12R720HS2/HP) | IKO International Inc | LINEAR ROLLER WAY, 720 MM RAIL, HALF PITCH SPECIFICATION, PRECISION ACCURACY GR |
| 0 | ||
![]() Rochester Electronics | BFP720H6327XTSA1 | Infineon Technologies AG | RF BJT Single 4V 25mA SOT-343 T/R RoHS : Compliant |
| 438,568 | |
| PMB7720HV1.4510PCC | Infineon Technologies AG | (Telecoms DECT IC) Limted Data Available |
| 821 | ||
| PMB7720HV1.458PCC | Infineon Technologies AG | (Telecoms DECT IC) Limted Data Available |
| 471 | ||
| PMB7720HV1.4510PCC | Lantiq | (Telecoms DECT IC) Limted Data Available |
| 5,500 | ||
| PMB7720HV1.458PCC | Lantiq | (Telecoms DECT IC) Limted Data Available |
| 1,000 | ||
![]() Sager | HW-17-20-H-D-250-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | ||
| HW-17-20-H-D-575-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-17-20-H-S-675-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-17-20-H-D-375-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-17-20-H-S-475-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-17-20-H-D-675-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-17-20-H-S-775-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-07-20-H-D-375-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-07-20-H-S-475-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-27-20-H-S-875-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-07-20-H-D-875-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-07-20-H-S-975-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 3882720-HR-V | Lumasense Technologies Inc | IGA 50-LO PLUS, 350�1800�C, 10M FIBER RED, OPTICS I 700MM |
| 0 | ||
| HW-07-20-H-S-375-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-27-20-H-S-775-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() Interstate Connecting Components | 360GS003B1720H6 | Glenair Inc | NON-ENVIRONMENTAL BS STRAIGHT W STRAIN RELIEF RoHS : Compliant | 1 | ||
| 360HS001M1720H8 | Glenair Inc | 38999 BS SZ17 AL/E-NI RoHS : Compliant | 0 | |||
| 380HS103M1720H6 | Glenair Inc | EMI BACKSHELL STRAIGHT SPIN COUPLING RoHS : Compliant |
| 0 | ||
| 390BA002NF2720HN | Glenair Inc | 5015 EMI BS 90 DEG SZ26 Al/Cad |
| 0 | ||
| 390HS036NF1720H5 | Glenair Inc | 38999 sIII&IV EMI BS STR SZ17 Al/Cad | 0 | |||
| 390HS001NF1720H6 | Glenair Inc | 38999 sIII&IV EMI BS STR SZ17 Al/Cad RoHS : Not Compliant | 0 | |||
| 390HS007Z11720H9 | Glenair Inc | 38999 sIII&IV EMI BS STR SZ17 SS | 0 | |||
| 390GH013NF1720H | Glenair Inc | 28840 EMI BS 45 DEG Al/Cad RoHS : Not Compliant |
| 0 | ||
| 380HS001NF1720H4 | Glenair Inc | EMI/RFI NON-ENVIRO BS STRAIGHT W STRAIN RELIEF | 0 | |||
| 390GJ013NF1720H | Glenair Inc | 28840 EMI BS 90 DEG Al/Cad | 0 | |||
![]() Chip 1 Exchange | HBO.C172.0H | INSTOCK | 243 | |||
| B82720-H15-A130 | TDK Electronics | INSTOCK | 59 | |||
![]() Avnet Abacus | B82720H15A35 | TDK Corporation | (Alt: B82720H0015A035) RoHS : Compliant | 1,050 | ||
| C1720HOAAD | Bulgin | Switch Toggle ONON SPDT Flat Toggle Quick Connect 250VAC Panel Mount (Alt: C1720HOAAD) RoHS : Compliant | 0 | |||
| C1720HOAAG | Bulgin | Switch Toggle ONOFFON SPDT Flat Toggle Quick Connect 250VAC Panel Mount (Alt: C1720HOAAG) RoHS : Compliant | 0 | |||
| B82720H14A13 | TDK Corporation | (Alt: B82720H0014A013) RoHS : Compliant | 0 | |||
| B82720H15A30 | TDK Corporation | (Alt: B82720H0015A030) RoHS : Compliant | 0 | |||
| B82720H15A25 | TDK Corporation | Choke Common Mode 10 mH 600 mA (Alt: B82720H0015A025) RoHS : Compliant | 0 | |||
| B82720H14A16 | TDK Corporation | Choke Common Mode 47 mH 300 mA (Alt: B82720H0014A016) RoHS : Compliant | 0 | |||
| B82720H15A28 | TDK Corporation | (Alt: B82720H0015A028) RoHS : Compliant | 0 | |||
| TSW-107-20-H-D-LL | Samtec Inc | (Alt: TSW-107-20-H-D-LL) RoHS : Compliant | 0 | |||
![]() Avnet Silica | TB0720H-13-F | Diodes Incorporated | (Alt: TB0720H-13-F) RoHS : Compliant | 3,000 | ||
| B39121B1720H810 | Qualcomm RFFE Filter Products | SAW Filters IF Band Pass 10893GHz to 12143GHz 12 Pins SMD (Alt: B39121B1720H810) RoHS : Compliant | 0 | |||
![]() DB Roberts | 0443720HJN | Essentra Components | HEX JAM NUT, 716-20 THREAD, .2 | 0 | ||
| 0443720HN | Essentra Components | HEX NUT, 716-20 THREAD, .380 H | 0 | |||
| 0443720HJNB | Essentra Components | HEX JAM NUT, 716-20 THREAD, .2 | 0 | |||
| 0443720HNB | Essentra Components | HEX NUT, 716-20 THREAD, .380 H | 0 | |||
![]() EBV Elektronik | BFP720H6327XTSA1 | Infineon Technologies AG | Trans GP BJT NPN 4V 0025A 4Pin3Tab SOT343 TR (Alt: SP000750410) RoHS : Compliant | 0 | ||
![]() Master Electronics | TSW-127-20-H-Q | Samtec Inc | RoHS : Compliant |
| 0 | |
| DW-07-20-H-S-200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-117-20-H-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-17-20-H-D-250-SM | Samtec Inc | Conn Board Stacker HDR 34 POS 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| HW-17-20-H-D-575-SM | Samtec Inc | Conn Board Stacker HDR 34 POS 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| HW-17-20-H-S-675-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-17-20-H-D-375-SM | Samtec Inc | Conn Board Stacker HDR 34 POS 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| HW-17-20-H-S-475-SM | Samtec Inc | Conn Board Stacker HDR 17 POS 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| HW-17-20-H-D-975-SM-LC | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-147-20-H-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-17-20-H-D-675-SM | Samtec Inc | Conn Board Stacker HDR 34 POS 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| HW-17-20-H-S-775-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HW-07-20-H-D-375-SM | Samtec Inc | Conn Board Stacker HDR 14 POS 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| HW-07-20-H-S-475-SM | Samtec Inc | Conn Board Stacker HDR 7 POS 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| HW-27-20-H-S-875-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | C1720HOAAD | Bulgin | Toggle Switches C1720HO BLACK ASSEMBLED |
| 50 | |
![]() Pasternack Enterprises US | PE3C5720/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to BNC Female Bulkhead Cable Using LMR-100 Coax with HeatShrink. PE3C5720/HS is a SMA male to BNC female bulkhead cable using LMR-100A coax. This Pasternack SMA male to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5720/HS SMA male to BNC female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | ||
| PE3W13720/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. TNC Male to Reverse Polarity SMA Male Cable Using LMR-240-DB Coax with HeatShrink. PE3W13720/HS is a TNC male to reverse polarity SMA male cable using LMR-240-DB coax. This Pasternack TNC male to reverse polarity SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13720/HS TNC male to SMA reverse polarity male cable assembly is constructed with LMR-240-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W03720/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Reverse Polarity BNC Male Cable Using RG188 Coax with HeatShrink. PE3W03720/HS is a SMA male right angle to reverse polarity BNC male cable using RG188 coax. This Pasternack SMA male right angle to reverse polarity BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to reverse polarity male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03720/HS SMA male right angle to BNC reverse polarity male cable assembly is constructed with RG188 coax. | 0 | |||
| PE34720/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to SMA Female Cable 24 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly TNC male to SMA female cable 24 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA female cable 24 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a female on end 2. PE34720/HS-24 can also be known as a TNC plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE34720/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our TNC male to SMA female cable has a maximum VSWR of 1.4:1. TNC plug to SMA jack cable assembly PE34720/HS-24 is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE34720/HS-24 can also be used in the other direction and will be a SMA female to TNC male cable assembly if the opposite connectivity is required. TNC plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C0720/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug Right Angle to SMA Male Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug right angle to SMA male low loss cable 12 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA plug right angle to SMA male low loss cable 12 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3C0720/HS-12 can also be known as a low loss right angle reverse polarity SMA male to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0720/HS-12 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Reverse polarity SMA male to SMA plug cable assembly PE3C0720/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0720/HS-12 can also be used in the other direction and will be a SMA male to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0720/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity SMA Plug Right Angle to SMA Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug right angle to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA plug right angle to SMA male low loss cable 36 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3C0720/HS-36 can also be known as a low loss right angle reverse polarity SMA male to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0720/HS-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Reverse polarity SMA male to SMA plug cable assembly PE3C0720/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0720/HS-36 can also be used in the other direction and will be a SMA male to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE34720/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to SMA Female Cable 48 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly TNC male to SMA female cable 48 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA female cable 48 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a female on end 2. PE34720/HS-48 can also be known as a TNC plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE34720/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our TNC male to SMA female cable has a maximum VSWR of 1.4:1. TNC plug to SMA jack cable assembly PE34720/HS-48 is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE34720/HS-48 can also be used in the other direction and will be a SMA female to TNC male cable assembly if the opposite connectivity is required. TNC plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W12720/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using LMR-100A-UF Coax with HeatShrink. PE3W12720/HS is a SMA male to SMA male right angle cable using LMR-100A-UF coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12720/HS SMA male to SMA male right angle cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE34720/HS-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. TNC Male to SMA Female Cable 72 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly TNC male to SMA female cable 72 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA female cable 72 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a female on end 2. PE34720/HS-72 can also be known as a TNC plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE34720/HS-72 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our TNC male to SMA female cable has a maximum VSWR of 1.4:1. TNC plug to SMA jack cable assembly PE34720/HS-72 is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE34720/HS-72 can also be used in the other direction and will be a SMA female to TNC male cable assembly if the opposite connectivity is required. TNC plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C0720/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity SMA Plug Right Angle to SMA Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug right angle to SMA male low loss cable 60 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA plug right angle to SMA male low loss cable 60 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3C0720/HS-60 can also be known as a low loss right angle reverse polarity SMA male to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0720/HS-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Reverse polarity SMA male to SMA plug cable assembly PE3C0720/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0720/HS-60 can also be used in the other direction and will be a SMA male to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE34720/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to SMA Female Cable 36 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly TNC male to SMA female cable 36 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA female cable 36 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a female on end 2. PE34720/HS-36 can also be known as a TNC plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE34720/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our TNC male to SMA female cable has a maximum VSWR of 1.4:1. TNC plug to SMA jack cable assembly PE34720/HS-36 is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE34720/HS-36 can also be used in the other direction and will be a SMA female to TNC male cable assembly if the opposite connectivity is required. TNC plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C0720/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Plug Right Angle to SMA Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug right angle to SMA male low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA plug right angle to SMA male low loss cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3C0720/HS-24 can also be known as a low loss right angle reverse polarity SMA male to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0720/HS-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Reverse polarity SMA male to SMA plug cable assembly PE3C0720/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0720/HS-24 can also be used in the other direction and will be a SMA male to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE34720/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to SMA Female Cable 12 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly TNC male to SMA female cable 12 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to SMA female cable 12 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a TNC cable connection on one end and a SMA cable connection on the other. Our TNC to SMA cable assembly has a male gender on end 1 and a female on end 2. PE34720/HS-12 can also be known as a TNC plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE34720/HS-12 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our TNC male to SMA female cable has a maximum VSWR of 1.4:1. TNC plug to SMA jack cable assembly PE34720/HS-12 is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE34720/HS-12 can also be used in the other direction and will be a SMA female to TNC male cable assembly if the opposite connectivity is required. TNC plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W09720/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. BNC Male to N Female Bulkhead Cable Using LMR-195-FR Coax with HeatShrink. PE3W09720/HS is a BNC male to N female bulkhead cable using LMR-195-FR coax. This Pasternack BNC male to N female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. Our male BNC to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09720/HS BNC male to N female bulkhead cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W10720/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Mini UHF Female Cable Using RG142 Coax with HeatShrink. PE3W10720/HS is a SMA male right angle to Mini UHF female cable using RG142 coax. This Pasternack SMA male right angle to Mini UHF female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm Mini UHF for connector 2. SMA right angle to Mini UHF coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10720/HS SMA male right angle to Mini UHF female cable assembly is constructed with RG142 coax. | 0 | |||
![]() Vyrian | TB0720H-13 | Diodes Incorporated | Thyristor Surge Protector, 50A | 15,888 | ||
| 117720-HMC647LP6 | Analog Devices Inc | 11,671 | ||||
| 117720-HMC649LP6 | Analog Devices Inc | 8,912 | ||||
| 117720-HMC936LP6E | Analog Devices Inc | 8,897 | ||||
| LME49720HABD | Texas Instruments | 8,133 | ||||
LME49720HA/NOPB![]() | Texas Instruments | Operational Amplifier, 2 Func, 700uV Offset-Max, MBCY8 RoHS : Compliant | 7,244 | |||
| 117720-HMC648LP6 | Analog Devices Inc | 6,542 | ||||
| LME49720HA | Texas Instruments | Operational Amplifier, 2 Func, 700uV Offset-Max, MBCY8 RoHS : Not Compliant | 4,330 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |