 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
6BL-S14-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Avnet Americas | MMBZ5226BLT1G | onsemi | - Tape and Reel (Alt: MMBZ5226BLT1G) RoHS : Compliant |
| 792,000 | |
| BC846BLT1G | onsemi | - Tape and Reel (Alt: BC846BLT1G) RoHS : Compliant |
| 312,000 | ||
| SBC846BLT1G | onsemi | - Tape and Reel (Alt: SBC846BLT1G) RoHS : Compliant |
| 72,000 | ||
| BC846BLT3G | onsemi | - Tape and Reel (Alt: BC846BLT3G) RoHS : Compliant |
| 20,000 | ||
| BC856BLT3G | onsemi | PNP Bipolar Transistor. ONSSPCTRNSTVU6M5P; - Tape and Reel (Alt: BC856BLT3G) RoHS : Compliant |
| 10,000 | ||
| SZMMBZ5246BLT1G | onsemi | - Tape and Reel (Alt: SZMMBZ5246BLT1G) RoHS : Compliant |
| 9,000 | ||
| SBC856BLT3G | onsemi | - Tape and Reel (Alt: SBC856BLT3G) RoHS : Compliant |
| 8,630 | ||
IS61WV25616BLL-10TLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 2.5V/3.3V 4M-Bit 256K x 16 10ns 44-Pin TSOP-II T/R - Tape and Reel (Alt: IS61WV25616BLL-10TLI-TR) RoHS : Compliant |
| 7,000 | ||
| IS64WV6416BLL-15TLA3-TR | Integrated Silicon Solution Inc | - Tape and Reel (Alt: IS64WV6416BLL-15TLA3-TR) RoHS : Compliant |
| 3,000 | ||
| IS43TR16256BL-107MBLI | Integrated Silicon Solution Inc | DRAM, DDR3L, 4 Gbit, 256M x 16bit, 933 MHz, BGA, 96 Pins - Trays (Alt: IS43TR16256BL-107MBLI) RoHS : Compliant | 760 | |||
IS61WV102416BLL-10MLI | Integrated Silicon Solution Inc | SRAM, 16 Mbit, 1M x 16bit, 3 V, 48 Pins, TFBGA - Trays (Alt: IS61WV102416BLL-10MLI) RoHS : Compliant |
| 420 | ||
| IS61WV204816BLL-10TLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 3.3V 32M-Bit 2M x 16 10ns 48-Pin TSOP-I - Bulk (Alt: IS61WV204816BLL-10TLI) RoHS : Compliant |
| 124 | ||
| IS62WV51216BLL-55TLI | Integrated Silicon Solution Inc | IC, SRAM, 8 Mbit, 512K x 16bit, 55 ns Access Time, TTL Interface, 2.5 V to 3.6 V supply, TSOP-II-44 - Bulk (Alt: IS62WV51216BLL-55TLI) RoHS : Compliant |
| 117 | ||
| NK6APC6BL | Panduit Corp | - Bulk (Alt: NK6APC6BL) RoHS : Compliant |
| 0 | ||
| 10128622-000416BLF | Amphenol Corporation | - Trays (Alt: 10128622-000416BLF) RoHS : Compliant |
| 0 | ||
 Newark | MMBZ5226BLT1G | onsemi | Zener Single Diode, 3.3 V, 225 mW, SOT-2; RoHS : Compliant |
| 15,232 | |
| MMBZ5226BLT1G | onsemi | Zener Single Diode, 3.3 V, 225 mW, SOT-2; RoHS : Compliant |
| 15,232 | ||
| MMBZ5226BLT1G | onsemi | Z DIODE SINGLE, 3.3V, 225MW, SOT-23; RoHS : Compliant |
| 15,000 | ||
| MMBZ5226BLT1G | onsemi | Z DIODE SINGLE, 3.3V, 225MW, SOT-23; RoHS : Compliant |
| 6,170 | ||
| MMBZ5226BLT1G | onsemi | Z DIODE SINGLE, 3.3V, 225MW, SOT-23; RoHS : Compliant |
| 6,170 | ||
| IS42VM32800M-6BLI | Integrated Silicon Solution Inc | DRAM, 166MHZ, 256MBIT, 1.8V, FBGA-90; RoHS : Compliant |
| 240 | ||
| FOC-LCSM0216-BLUER | L-com Inc | CONN FIBER OPT, LC, SINGLEMODE, 1.6MM; RoHS : Not Compliant |
| 64 | ||
| FP301-3/8-6-BLACK-10 PCPKS | 3M Interconnect | HEAT SHRINK TUBING, 0.375IN ID, PO, BLAC; RoHS : Compliant |
| 31 | ||
| TRD695ASZRA6BLK-2 | L-com Inc | ETHERNET CABLE; RoHS : Not Compliant |
| 21 | ||
| FP301-1/8-6-BLACK-10 PCPKS | 3M Interconnect | HEAT SHRINK TUBING, 0.125IN ID, PO, BLAC; RoHS : Compliant |
| 18 | ||
| TRD695ASRA6BLK-20 | L-com Inc | ETHERNET CABLE; RoHS : Not Compliant |
| 14 | ||
| TRD815SRA6BLK-5 | L-com Inc | ENET CBL, CAT5E, 90° RJ45 PL TO RJ45 PL; RoHS : Compliant |
| 7 | ||
| 46BL-1 | GRAS SOUND & VIBRATION APS | CCP MICROPHONE, 0.25", 4HZ TO 20KHZ; Directivity:-; Carrier Frequency:-; Frequency Response Min:4Hz; Frequency Response Max:20kHz; Product Range:- RoHS : Not Compliant |
| 5 | ||
| TOFIC6-BLK-100F | L-com Inc | Bulk C6 4P F/UTP POE 23SLD CMR-CMG PVC B; RoHS : Not Compliant |
| 5 | ||
| TRD695RA6BL-5 | L-com Inc | ETHERNET CBL, CAT6; RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | HMC6146BLC5A | Analog Devices Inc | 40.5-43.5GHz IQ Up Converter RoHS : Compliant |
| 541 | |
| EV1HMC6146BLC5A | Analog Devices Inc | HMC6146BLC5A EVALUATION PCB AS RoHS : Compliant |
| 26 | ||
| HMC6146BLC5ATR | Analog Devices Inc | 40.5-43.5GHz IQ Up Converter RoHS : Compliant |
| 0 | ||
| HMC6146BLC5ATR-R5 | Analog Devices Inc | 40.5-43.5GHz IQ Up Converter RoHS : Compliant |
| 0 | ||
 RS | B2 3/16 BLUE 4FT (106-10106) | SUMITOMO ELECTRIC Interconnect Products | HEAT SHRINK TUBING, FLEX POLYOLEFIN, 3/16 IN, 2:1, +135C, BLU, 4FT LENGTHS |
| 7,776 | |
| PUN-H-5/16-BL-150-CB (567949) | Festo | TUBING, POLYURETHANE, BLUE, 1 EA 1 FOOT, 150FT LENGTH, 5/16"OD, TUV, FOOD-SAFE |
| 300 | ||
N201-S06-BL | Tripp Lite | CAT6 GIGABIT SNAGLESS MOLDED SLIM UTP PATCH CABLE (RJ45 M/M), BLUE, 6 FT. RoHS : Compliant |
| 67 | ||
| FP301-3/32-6"-BLACK (7010350269) | 3M | HEAT SHRINK TUBING, 2.36MM, 2:1, 15CM LENGTH, BLACK, FP-301 SERIES |
| 52 | ||
| 54216 (KEL-U 10/6 BLACK) | icotek Corporation | SPLIT MULTI CABLE TRANSIT FRAMES, KEL-U 10/6 BLACK |
| 30 | ||
| 4136-BLACK | 80/20 Inc | BLACK 10 S 4 HOLE INSIDE CORNER GUSSET CORNER BRACKET |
| 12 | ||
| 51521 (KEL-BES-S 16 BLACK) | icotek Corporation | SPLIT BRUSH PLATE, M32/M50, FOR CABLE ROUTING, SNAP-IN, BLACK, KEL-BES-S SERIES |
| 11 | ||
| 42420 (KEL-QUICK 10/6 BLACK) | icotek Corporation | SPLIT MULTI CABLE TRANSIT FRAMES, KEL-QUICK 10/6, BLACK |
| 8 | ||
| LUCAX6BL | Schneider Electric | MODULE, MOTOR STARTER, FOR TESYS SERIES, SUP-V 24DC, TESYS SERIES |
| 7 | ||
| LC1D186BL | Schneider Electric | NON-REVERSING CONTACTOR, 24VDC, 18A, 3P, DIN RAIL, TESYS DECA SERIES RoHS : Compliant |
| 7 | ||
| FP-301VW-1/16-BLACK-1000' (00054007084624) | 3M | HEAT SHRINK TUBING, HIGH FLAME FLEXABLE, 1/16IN, 2:1 BLACK, SPOOL, FP-301 SERIES |
| 6 | ||
| EPS300-1 1/2-6"-BLACK (7010350271) | 3M | TUBING, HEAT SHRINK, ADHESIVE LINED, FLAME RETARDANT, BLK & CLEAR POLYOLEFIN,6" L |
| 5 | ||
| FP301-1 1/2-6"-BLACK (7010350272) | 3M | HEAT SHRINK TUBING, 38.1MM, 2:1, 15CM LENGTH, BLACK, FP-301 SERIES |
| 4 | ||
| HIX 3/16 BLACK (HIX 3/16 BLACK) | Ico-Rally | HEAT SHRINK TUBING, 3/16 IN., 0.020 IN., 2:1, -55 TO +135 C, POLYOLEFIN, BLACK |
| 2 | ||
| HIX 1/16 BLACK UL (HIX 1/16 BLACK UL) | Ico-Rally | HEAT SHRINK TUBING, 1/16 IN., 0.017 IN., 2:1, -55 TO +135 C, POLYOLEFIN, BLACK |
| 2 | ||
 Microchip Technology Inc | APT5016BLLG | Microchip Technology Inc | MOSFET MOS 7 500 V 160 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 197 | |
| APT20M36BLLG | Microchip Technology Inc | MOSFET MOS 7 200 V 36 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 138 | ||
| SG1526BL | Microchip Technology Inc | Voltage Mode PWM, 500Khz - 8V to 35V Operation -55C to 125C, Projected EOL: 2045-10-23 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| SG1526BL-883B | Microchip Technology Inc | Voltage Mode PWM, 500Khz - 8V to 35V Operation -55C to 125C, Projected EOL: 2045-10-23 - Contact for Pricing RoHS : Not Compliant | 0 | |||
 Bisco Industries | VC-312-16 BLACK | Caplugs | 3,620 | |||
| VC-234-16 BLACK | Caplugs | 3,586 | ||||
| VC-218-16 BLACK | Caplugs | 3,000 | ||||
| VRF-250X1500-16 BLACK | Caplugs | 1,049 | ||||
| VC-1062-16 BLACK | Caplugs | 937 | ||||
| VC-1250-16 BLACK | Caplugs | 766 | ||||
| VC-750-16 BLACK | Caplugs | 595 | ||||
| VRF-250X875-16 BLACK | Caplugs | 420 | ||||
| VC-2500-16 BLACK | Caplugs | 350 | ||||
| BPF-11/16 BLACK | Caplugs | 150 | ||||
| VHC-3000-16 BLACK | Caplugs | 150 | ||||
| 801-6-BLK-RL | Parker Hannifin Corp | 120 | ||||
| HT-800-1/16-BLK | B&J Rubber Products | 30 | ||||
| CL-6-BLPL-3.00-S | Carr Lane Manufacturing Co Inc | 5 | ||||
| 0031-00116-BLACK | MISCELLANEOUS | 1 | ||||
 Rochester Electronics | PZU5.6BL,315 | Nexperia | PZUxBL series - Single Zener diodes RoHS : Compliant |
| 30,000 | |
| MMBZ5226BLT1G | onsemi | Zener Diode Single 3.3V 225mW SOT-23-3 T/R RoHS : Compliant |
| 55,457 | ||
| MMBZ5226BLT1 | onsemi | 225 mW; 5% Zener Diode Voltage Regulator RoHS : Compliant |
| 188,655 | ||
| BC846BLT1G | onsemi | Trans BJTs Single 65V 100mA SOT-23-3 T/R RoHS : Compliant |
| 47,300 | ||
| SBC856BLT1G | onsemi | PNP Bipolar Transistor RoHS : Compliant |
| 4 | ||
| MMBZ5246BLT1G | onsemi | Zener Diode Single 16V 225mW SOT-23-3 T/R RoHS : Compliant |
| 247,437 | ||
| MMBZ5256BLT1 | onsemi | Zener Diode, 30V V(Z), 5%, 0.225W, Silicon, Unidirectional, TO-236AB RoHS : Not Compliant |
| 6,000 | ||
| BC856BLT1 | onsemi | PNP Bipolar Transistor RoHS : Compliant |
| 534,133 | ||
LM336BLP-2-5 | Texas Instruments | IC VOL REF Shunt Fixed 2.49V 10mA ±2% TO-226-3 Bulk RoHS : Compliant |
| 1,700 | ||
| CS5016-BL16 | Cirrus Logic | CS5016 - 16-Bit, Self-Calibrating A/D Converter RoHS : Not Compliant |
| 102 | ||
IS43LR32160B-6BLI | Integrated Silicon Solution Inc | DDR1 DRAM, 16MX32, 5.5ns, CMOS, PBGA90 RoHS : Compliant |
| 0 | ||
| IS62C25616BL-45TLI | Integrated Silicon Solution Inc | Standard SRAM, 32KX8, 45ns, CMOS, PDSO44 RoHS : Compliant |
| 1,719 | ||
| LP3986BL-285285 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2 Output, 2.85V1, 2.85V2, CMOS, PBGA8 RoHS : Not Compliant |
| 1,500 | ||
| LP3986BL-3131 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 2 Output, 3.1V1, 3.1V2, CMOS, PBGA8 RoHS : Not Compliant |
| 217 | ||
| M51956BL#TF0J | Renesas Electronics Corporation | Voltage Detecting, System Resetting IC RoHS : Not Compliant |
| 15,680 | ||
 Sager | NK6APC6BL | Panduit Corp | Ethernet Cables / Networking Cables Netkey copper patch cord, category 6A, C RoHS : Compliant |
| 0 | |
| Y282816/BL | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| UTP28CH16BL-Q | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 5e (SD), 28 AWG, | 0 | |||
| FRH45SC6BL | Panduit Corp | Wire Ducting & Raceways SPLIT COVER FOR HORIZ 45 |
| 0 | ||
| HLCD-30-15.56-BLS-TRS-1 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| STP6X26BL | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A, Black S/FTP C | 0 | |||
| CAD.M26.BLA.C92BZ | LEMO connectors | Circular Push Pull Connectors |
| 0 | ||
| FROVRASC6BL | Panduit Corp | Wire Ducting & Raceways SPLIT COVER FOR 6X4 OUTSI | 0 | |||
| FRTSC12W6BL | Panduit Corp | Wire Ducting & Raceways SPLIT COVER FOR HORIZONTA | 0 | |||
| K676BLRCS429 | ABB Group | Thomas & Betts |
| 0 | ||
| K6BLGN1.52NLV3060D | C&K Switches | Pushbutton Switches K6BLGN1.52N LV3060D | 0 | |||
| K6BLYE1.52NLV3270D | C&K Switches | Pushbutton Switches K6BLYE1.52N LV3270D RoHS : Compliant | 0 | |||
| PKG.M0.6BL.LZ | LEMO connectors | Circular Push Pull Connectors 6P FIX RCPT W/2NUTS FEMALE FOR SOLDER RoHS : Compliant |
| 0 | ||
| NKFD1W6BLDSC | Panduit Corp | Wire Ducting & Raceways Keyst eDrawer 6 Duplex SC Adapte | 0 | |||
| HLCD-30-08.66-BLS-TR-1 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
 Coilcraft Direct | FA2786-BLD | Coilcraft Inc | Transformer, for TI TPS68000, SMT, RoHS RoHS : Compliant |
| 744 | |
| BU9H-2011R6BL | Coilcraft Inc | Common mode choke, power line, RoHS RoHS : Compliant |
| 408 | ||
| HA3586-BLD | Coilcraft Inc | Transformer, for Akros AS1113, SMT, RoHS RoHS : Compliant |
| 397 | ||
| TTWB-16-BLD | Coilcraft Inc | Wideband RF transformer, SMT, RoHS RoHS : Compliant |
| 350 | ||
| BU15-2721R6BL | Coilcraft Inc | Common mode choke, signal line, RoHS RoHS : Compliant |
| 257 | ||
| PWB-16-BLC | Coilcraft Inc | Wideband RF transformer, SMT, RoHS RoHS : Compliant |
| 191 | ||
| BU9-2011R6BL | Coilcraft Inc | Common mode choke, power line, RoHS RoHS : Compliant |
| 84 | ||
| GA3366-BL | Coilcraft Inc | Transformer for ON Semiconductor NCP1606, RoHS RoHS : Compliant |
| 39 | ||
| FA2706-BLD | Coilcraft Inc | Transformer, for PM8800, SMT, RoHS RoHS : Compliant |
| 15 | ||
| GA3136-BL | Coilcraft Inc | Transformer, for TI UCC2809, SMT, RoHS RoHS : Compliant |
| 9 | ||
| BU10-1311R6BL | Coilcraft Inc | Common mode choke, power line, RoHS RoHS : Compliant |
| 7 | ||
| Q4436-BL | Coilcraft Inc | Transformer, for NSC LM258x, SMT, RoHS RoHS : Compliant |
| 0 | ||
| YA8916-BLD | Coilcraft Inc | Flyback Transformer, for TI LM5180-Q1, SMT, RoHS RoHS : Compliant |
| 0 | ||
 TME | 2SC3326-B,LF(T | Toshiba America Electronic Components | Transistor: NPN; bipolar; 20V; 0.3A; 0.15W; SC59 RoHS : Compliant |
| 14,185 | |
| SBC846BLT1G | onsemi | Transistor: NPN; bipolar; 65V; 0.1A; 0.225W; SOT23,TO236AB RoHS : Compliant |
| 2,693 | ||
| CC-006BL | Ninigi | Connector: RCA; plug; male; with strain relief; straight; blue |
| 310 | ||
| CR2016 BLISTER | Energizer Battery Company | Battery: lithium; coin; CR2016; 3V; 90mAh; non-rechargeable; 1pcs. |
| 144 | ||
| 421626 BL005 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 16AWG; PVC; blue; 300V; 30.5m |
| 2 | ||
| 7036 BL001 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 12AWG; PVC; blue; 300V; 305m |
| 1 | ||
| 300DP4R6BLKM1QEBLK | E-Switch Inc | ROCKER; DPDT; (ON)-OFF-(ON); 5A/120VAC; 5A/28VDC; black; 300 RoHS : Unknown |
| 0 | ||
| 300SP5R6BLKM1QEBLK | E-Switch Inc | ROCKER; SPDT; ON-OFF-(ON); 5A/120VAC; 5A/28VDC; black; 300; silver RoHS : Compliant |
| 0 | ||
| 300SP5J6BLKVS2QE | E-Switch Inc | ROCKER; SP3T; Pos: 3; ON-OFF-(ON); 2A/250VAC; 5A/28VDC; black; 300 RoHS : Compliant |
| 0 | ||
| 400MSP1R6BLKM7QE | E-Switch Inc | ROCKER; SPDT; ON-ON; 3A/120VAC; 3A/28VDC; black; 400; Leads: for PCB RoHS : Compliant |
| 0 | ||
| 400MSP6R6BLKM7QE | E-Switch Inc | ROCKER; SPST; OFF-ON; 3A/120VAC; 3A/28VDC; black; 400; 15.8x7.11mm RoHS : Compliant |
| 0 | ||
| 3003P4R6BLKM1QEBLK | E-Switch Inc | ROCKER; 3PDT; (ON)-OFF-(ON); 5A/120VAC; 5A/28VDC; black; 300 RoHS : Compliant |
| 0 | ||
| 300DP1R6BLKM1QEBLK | E-Switch Inc | ROCKER; DPDT; ON-ON; 5A/120VAC; 5A/28VDC; black; 300; 15.2x12.7mm RoHS : Compliant |
| 0 | ||
| 400MSP6R6BLKVS2QE | E-Switch Inc | ROCKER; SPST; OFF-ON; 3A/120VAC; 3A/28VDC; black; 400; 15.8x7.11mm RoHS : Compliant |
| 0 | ||
| BC856BLT3G | onsemi | Transistor: PNP; bipolar; 65V; 0.1A; 0.225W; SOT23,TO236AB RoHS : Compliant |
| 0 | ||
 ComSIT USA | IS62WV25616BLL55TLITR | Integrated Silicon Solution Inc | AVAILABLE EU | 829 | ||
| IS43TR16256BL125KBLTR | Integrated Silicon Solution Inc | AVAILABLE EU | 758 | |||
| 400MSP1R6BLKM6QE | AVAILABLE EU | 812 | ||||
| MMBZ5246BLT1G | ON SEMICONDUCTOR/ONSEMI | AVAILABLE EU | 554 | |||
| EPS300316BLACK | 3M Interconnect | AVAILABLE EU | 7,811 | |||
| IS42S16400J6BL | AVAILABLE EU | 224 | ||||
| IS42S32800G6BLI | AVAILABLE EU | 233 | ||||
ComSIT USA | SBC856BLT1G | onsemi | PNP SILICON GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 65V V(BR)CEO, 1-Element, PNP, Silicon, TO-236AB RoHS : Compliant | 80,992 | ||
| BC846BLT1G | onsemi | GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 65V V(BR)CEO, 1-Element, NPN, Silicon, TO-236 RoHS : Compliant | 66,006 | |||
| BC856BLT1 | onsemi | PNP SILICON GENERAL PURPOSE TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 65V V(BR)CEO, 1-Element, PNP, Silicon, TO-236AB RoHS : Not Compliant | 9,935 | |||
| IS64WV6416BLL15BA3 | Integrated Silicon Solution Inc | Standard SRAM, 64KX16, 15ns, CMOS, PBGA48 RoHS : Compliant | 4,388 | |||
| ALM2506BLKG | Avago Technologies | GPS LOW NOISE AMPLIFIER VARIABLE CURRENT/SHUTDOWN FUNCTION RF and Baseband Circuit, PDSO6 RoHS : Compliant | 1,300 | |||
| MGA685T6BLKG | Avago Technologies | RF Amp Single LNA 1.5GHz 6-Pin UTSLP Bag RoHS : Compliant | 900 | |||
| IS64WV25616BLL10CTLA3 | Integrated Silicon Solution Inc | Standard SRAM, 256KX16, 10ns, CMOS, PDSO44 RoHS : Not Compliant | 540 | |||
| IS61WV102416BLL10MLI | Integrated Silicon Solution Inc | 1M X 16 HIGH-SPEED ASYNCHRONOUS CMOS STATIC RAM WITH 3.3V SUPPLY Standard SRAM, 1MX16, 10ns, CMOS, PBGA48 RoHS : Not Compliant | 326 | |||
| MGA30316BLKG | Avago Technologies | 3.3-3.9 GHZ 1/2 WATT HIGH LINEARITY AMPLIFIER Narrow Band Medium Power Amplifier, 3300MHz Min, 3900MHz Max, 1 Func, GAAS RoHS : Compliant | 189 | |||
| IS46R16160F6BLA2 | Integrated Silicon Solution Inc | 16MX16 DDR SDRAM DDR DRAM, 16MX16, 0.7ns, CMOS, PBGA60 RoHS : Not Compliant | 155 | |||
| IS62WV6416BLL55TLI | Integrated Silicon Solution Inc | Standard SRAM, 64KX16, 55ns, CMOS, PDSO44 RoHS : Not Compliant | 119 | |||
| HM62256BLP7 | Hitachi Ltd | 256K SRAM (32-KWORD X 8-BIT) Standard SRAM, 32KX8, 70ns, CMOS, PDIP28 RoHS : Not Compliant | 66 | |||
| IS42S32400F6BLI | Integrated Silicon Solution Inc | 4M X 32, 128 M BIT SYNCHRONOUS DRAM Synchronous DRAM, 4MX32, 5.4ns, CMOS, PBGA90 RoHS : Compliant | 52 | |||
| IS43R16320D6BL | Integrated Silicon Solution Inc | 32M X 16, 512 MEGABIT DDR SDRAM DDR DRAM, 32MX16, 0.7ns, CMOS, PBGA60 RoHS : Compliant | 15 | |||
| IS61WV51216BLL10TLI | Integrated Silicon Solution Inc | Standard SRAM, 512KX16, 10ns, CMOS, PDSO44 RoHS : Not Compliant | 13 | |||
 GLYN GmbH & Co. KG | IS43LQ32512A-046BLI-TR | Integrated Silicon Solution Inc | mobile LPDDR4/LPDDR4X, 16Gb, 512Mx32, 2133MHz, 1.0 | 5,000 | ||
 Interstate Connecting Components | B2 1/16 BLACK SPL | SUMITOMO ELECTRIC Interconnect Products | M23053/5-102-0 M23053/5-302-0 B2 1/16 BLACK SPL |
| 4,200 | |
| SM3-12 1/16 BLACK SPL | SUMITOMO ELECTRIC Interconnect Products | M23053/5-102-0 M23053/5-302-0 SM3-12 1/16 BLACK SPL |
| 1,244 | ||
| W3B2 19/6 BLACK 4FT | SUMITOMO ELECTRIC Interconnect Products | 115-10091 W3B2 19/6 BLACK 4FT |
| 1,123 | ||
| SM3-12 3/16 BLACK SPL | SUMITOMO ELECTRIC Interconnect Products | M23053/5-105-0 M23053/5-305-0 SM3-12 3/16 BLACK SPL |
| 490 | ||
| W3B2 (4X) 24/6 BLACK 4FT | SUMITOMO ELECTRIC Interconnect Products | 124-10009 W3B2 (4X) 24/6 BLACK 4FT |
| 460 | ||
| 10128622-000416BLF | Amphenol FCi | HPCE RAR 2LP16S-ENHANCE WALL | 0 | |||
| AB-BBD06BL-BBDBR-QF001 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| AB-BD06BL-BDBR-QD003 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| AB-BBD06BL-BBDBR-QFA05 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| ITS4106AGG18-1PPG16-BL | Glenair Inc | 0 | ||||
| ITS4106AGG36-B78SF6-BL | Glenair Inc | 0 | ||||
| AB-BBD06BL-BBDBL-QF003 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| AB-BD06BL-BDBL-QD005 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| AT04-4P-PM06BLK | Amphenol Sine Systems | 4 POSITION PANEL MOUNT RECEPTA | 0 | |||
| 10130787-160426BLF | Amphenol FCi | HPCE VR PF 4HP2LP26S-10130787- | 0 | |||
 NexGen Digital | BC846BLT1G | onsemi | RoHS : Compliant | 29,079 | ||
| IS61WV6416BLL-12TLI | Integrated Silicon Solution Inc | RoHS : Compliant | 1,168 | |||
| F4U036-BLK | 6 | |||||
 PEI Genesis | O2B2S 3/16 BLACK | SUMITOMO ELECTRIC Interconnect Products |
| 20,000 | ||
| B2 3X 18/6 BLACK SPL | SUMITOMO ELECTRIC Interconnect Products |
| 6,000 | |||
| DV6BL1 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| DRK95-16BL | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| DAK95-16BL | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
 Powell Electronics | R120 (TW) 3/16 BLACK SPL | SUMITOMO ELECTRIC Industries Ltd | R120 (TW) 3/16 BLACK SPL |
| 20,000 | |
| CY6/BL | Altech Corporation | DIN Term Blk, Screw, Feed-Thru |
| 7,944 | ||
| STB06-BLANK-6 | TE Connectivity | Connectors |
| 5,742 | ||
| B2 (3X) 18/6 BLACK SPL | SUMITOMO ELECTRIC Industries Ltd | B2 (3X) 18/6 BLACK SPL |
| 1,200 | ||
| BSX-6-BLUE | Neutrik USA Inc | Colored boot - X series -Blue |
| 924 | ||
| DB16/BL | Altech Corporation | 1 pole disti. Block 80Amp |
| 805 | ||
| BXX-6-BLUE | Neutrik USA Inc | Colored Boot - XX-Series -Blue |
| 462 | ||
| BPX-6-BLUE | Neutrik USA Inc | Colored boot - PX series plug-Blue |
| 396 | ||
| CX6/BL | Altech Corporation | DIN Term Blk, Spring, Feed-Thru RoHS : Unknown |
| 264 | ||
| 863086BLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 152 | ||
| 89898-316BLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 148 | ||
| SCDX-6-BLUE | Neutrik USA Inc | D size hinged sealing cover - plastic - |
| 132 | ||
| PXR-6-BLUE | Neutrik USA Inc | 1/4" Phone Plug Accessory |
| 18 | ||
 PUI | 8949-ID2882/06BLKA | 8 | ||||
| TOFC6-BLK | L-com Inc | 8 | ||||
 Richardson RFPD | CP0402A0836BLTR | Kyocera AVX Components | RF Couplers Uni-directional Coupling 22dB 0.824GHz RoHS : Not Compliant |
| 0 | |
| HMC6146BLC5ATR | Analog Devices Inc | Up/Down Conv Mixer 44GHz 16-Pin CLLCC T/R RoHS : Compliant |
| 0 | ||
| HMC6146BLC5ATR-R5 | Analog Devices Inc | Up/Down Conv Mixer 44GHz 16-Pin CLLCC T/R RoHS : Compliant |
| 0 | ||
| APT5016BLLG | Microchip Technology Inc | Trans MOSFET N-CH 500V 30A 3-Pin(3+Tab) TO-247 Tub RoHS : Compliant |
| 0 | ||
| EV1HMC6146BLC5A | Analog Devices Inc | HMC6146BLC5A Up-Down Converter and Mixer Evaluatio RoHS : Compliant |
| 0 | ||
 Rutronik | LBC846BLT1G | LRC Leshan Radio Co Ltd | NPN TRANSISTOR 0,1A 80V SOT23 RoHS : Compliant |
| 15,000 | |
 Chip 1 Exchange | BC846BLT3G | onsemi | INSTOCK RoHS : Compliant | 902,120 | ||
| MMBZ5226BLT1G | onsemi | INSTOCK RoHS : Compliant | 62,400 | |||
| SBC856BLT1G | onsemi | INSTOCK RoHS : Compliant | 36,000 | |||
| BC846BLT1G | onsemi | INSTOCK RoHS : Compliant | 10,400 | |||
| MMBZ5226BLT1 | Microchip Technology Inc | INSTOCK | 9,000 | |||
| SBC856BLT1 | onsemi | INSTOCK RoHS : Not Compliant | 3,000 | |||
| MMBZ5226BLT1 | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 3,000 | |||
| IS61WV25616BLL-10TLITR | Integrated Silicon Solution Inc | INSTOCK | 2,959 | |||
| BC846BLT1G | onsemi | INSTOCK RoHS : Compliant | 1,800 | |||
| IS61WV102416BLL-10MLI-TR | Integrated Silicon Solution Inc | INSTOCK RoHS : Compliant | 1,128 | |||
| ZPB46BL300H | Nichicon Corporation | INSTOCK RoHS : Unknown | 500 | |||
| IS61WV25616BLL-10TLI | Integrated Silicon Solution Inc | INSTOCK RoHS : Compliant | 87 | |||
| IS61WV51216BLL-10MLI | INSTOCK | 69 | ||||
| IS43R32800B-6BL | INSTOCK | 7 | ||||
| IS43TR16256BL-107MBL | Integrated Silicon Solution Inc | INSTOCK RoHS : Compliant | 4 | |||
 Avnet Abacus | 70526BLF | Amphenol Corporation | Plastic Dust Cap for C Shell Size Female Connector (Alt: 70526BLF) RoHS : Compliant | 0 | ||
| 07-26 BLK | Grayhill Inc | (Alt: 07-26 BLK) RoHS : Compliant | 0 | |||
| 863086BLF | Amphenol Corporation | Connector Accessories Plastic Hood Black Thermoplastic (Alt: 863086BLF) RoHS : Compliant | 0 | |||
| VT92PH16BLT | Aptiv PLC | Conn Housing F 16 POS 5mm ST Cable Mount (Alt: VT92PH16BLT) RoHS : Compliant | 0 | |||
| 89898-306BLF | Amphenol Corporation | Conn Socket Strip RCP 12 POS 254mm Solder ST SMD Tube (Alt: 89898-306BLF) RoHS : Compliant | 0 | |||
| SJ5076 BLACK | 3M | Bumpon FeetStopSpacerProtector for 3M Racks and Cabinets PU Polyurethane Strip (Alt: 7000001953) RoHS : Compliant | 0 | |||
| AB3526B-LW100-R | PUI Audio | Piezo Bender 26 kHz 003 UF 300 ohm 138 Dia 003 H (Alt: AB3526B-LW100-R) RoHS : Compliant | 0 | |||
| AB2746B-LW100-R | PUI Audio | Piezo Bender 46 kHz 0016 UF 250 ohm 107 Dia 003 H (Alt: AB2746B-LW100-R) RoHS : Compliant | 0 | |||
GMK316BLD475KL-T | TAIYO YUDEN | SMD Multilayer Ceramic Capacitor 47 uF 35 V 1206 3216 Metric 10 X5R MSAY Series 32 mm - Tape and Reel (Alt: CFGMK316BLD475KL-T) RoHS : Compliant | 0 | |||
| TMK316BLD106KL-T | TAIYO YUDEN | SMD Multilayer Ceramic Capacitor 10 uF 25 V 1206 3216 Metric 10 X5R MSAY Series 32 mm - Tape and Reel (Alt: CFTMK316BLD106KL-T) RoHS : Compliant | 0 | |||
| TMK316BLD106ML-T | TAIYO YUDEN | SMD Multilayer Ceramic Capacitor 10 uF 25 V 1206 3216 Metric 20 X5R MSAY Series 32 mm (Alt: CFTMK316BLD106ML-T) RoHS : Compliant | 0 | |||
| GMK316BLD475ML-T | TAIYO YUDEN | SMD Multilayer Ceramic Capacitor 47 uF 35 V 1206 3216 Metric 20 X5R MSAY Series 32 mm (Alt: CFGMK316BLD475ML-T) RoHS : Compliant | 0 | |||
Avnet Asia | SBC846BLT1G | onsemi | (Alt: SBC846BLT1G) RoHS : Compliant |
| 3,000 | |
| IS61WV51216BLL-10MLI | Integrated Silicon Solution Inc | SRAM, Asynchronous SRAM, 8 Mbit, 512K x 16bit, BGA, 48 Pins, 2.4 V (Alt: IS61WV51216BLL-10MLI) RoHS : Compliant |
| 1,050 | ||
| IS43LQ32256C-046BLI | Integrated Silicon Solution Inc | IS43LQ32256C-046BLI (Alt: IS43LQ32256C-046BLI) RoHS : Compliant | 0 | |||
| IS61WV102416BLL-10MLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 2.5V/3.3V 16M-Bit 1M x 16 10ns 48-Pin TFBGA T/R (Alt: IS61WV102416BLL-10MLI-TR) RoHS : Compliant | 0 | |||
| MMBZ5226BLT1G | onsemi | (Alt: MMBZ5226BLT1G) RoHS : Compliant | 0 | |||
| IS62WV12816BLL-55TLI | Integrated Silicon Solution Inc | IC, SRAM, 2 Mbit, 128K x 16bit, 55 ns Access Time, TTL Interface, 2.5 V to 3.6 V supply, TSOP-II-44 (Alt: IS62WV12816BLL-55TLI) RoHS : Compliant | 0 | |||
| IS62WV51216BLL-55TLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 3.3V 8M-Bit 512K x 16 55ns 44-Pin TSOP-II T/R (Alt: IS62WV51216BLL-55TLI-TR) RoHS : Compliant | 0 | |||
| IS64WV25616BLL-10CTA3-TR | Integrated Silicon Solution Inc | (Alt: IS64WV25616BLL-10CTA3-TR) RoHS : Compliant | 0 | |||
| IS43LQ16K01B-046BLI | Integrated Silicon Solution Inc | (Alt: IS43LQ16K01B-046BLI) RoHS : Compliant | 0 | |||
| IS61WV25616BLL-10BLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 2.5V/3.3V 4M-Bit 256K x 16 10ns 48-Pin Mini-BGA (Alt: IS61WV25616BLL-10BLI) RoHS : Compliant |
| 0 | ||
| BC846BLT3G | onsemi | (Alt: BC846BLT3G) RoHS : Compliant |
| 0 | ||
| IS46LQ32K01B-046BLA2-TR | Integrated Silicon Solution Inc | AUTOMOTIVE (TC: -40 TO +105C), 32G, 1.06-1.17/1.70-1.95V, LPDDR4, 1GX32, 2133MHZ, 200 BALL BGA# (10MMX14.5MM) ROHS, T&R (Alt: IS46LQ32K01B-046BLA2-TR) RoHS : Compliant | 0 | |||
| IS42S32200N-6BLI-TR | Integrated Silicon Solution Inc | (Alt: IS42S32200N-6BLI-TR) RoHS : Compliant | 0 | |||
| IS43LQ32512AL-046BLI-TR | Integrated Silicon Solution Inc | ISNIS43LQ32512AL-046BLI-TR LPDDR4 16G 21 (Alt: IS43LQ32512AL-046BLI-TR) RoHS : Compliant | 0 | |||
| IS64WV51216BLL-10CTLA3 | Integrated Silicon Solution Inc | (Alt: IS64WV51216BLL-10CTLA3) RoHS : Compliant | 0 | |||
 Avnet Silica | SBC846BLT3G | onsemi | NPN Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: SBC846BLT3G) RoHS : Compliant | 650,000 | ||
| SBC856BLT1G | onsemi | PNP Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: SBC856BLT1G) RoHS : Compliant | 126,000 | |||
| SZMMBZ5246BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5246BLT1G) RoHS : Compliant | 126,000 | |||
| IS61WV102416BLL-10TLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 25V33V 16MBit 1M x 16 10ns 48Pin TSOPI TR (Alt: IS61WV102416BLL-10TLI-TR) RoHS : Compliant | 1,500 | |||
| IS64WV25616BLL-10CTLA3 | Integrated Silicon Solution Inc | SRAM Chip Async Single 25V33V 4MBit 256K x 16 10ns 44Pin TSOPII (Alt: IS64WV25616BLL-10CTLA3) RoHS : Compliant | 135 | |||
| MMBZ5226BLT1G | onsemi | Zener Single Diode 33 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5226BLT1G) RoHS : Compliant | 0 | |||
| IS42S32160H-6BLI | Integrated Silicon Solution Inc | B41252B338M62 (Alt: IS42S32160H-6BLI) RoHS : Compliant | 0 | |||
| IS45SM32800K-6BLA2 | Integrated Silicon Solution Inc | (Alt: IS45SM32800K-6BLA2) RoHS : Compliant | 0 | |||
| IS43LR16320B-6BL-TR | Integrated Silicon Solution Inc | DRAM Chip Mobile DDR SDRAM 512MBit 32M x 16 18V 60Pin TFBGA TR (Alt: IS43LR16320B-6BL-TR) RoHS : Compliant | 0 | |||
| IS62WV12816BLL-55TLI | Integrated Silicon Solution Inc | IC SRAM 2 Mbit 128K x 16bit 55 ns Access Time TTL Interface 25 V to 36 V supply TSOPII44 (Alt: IS62WV12816BLL-55TLI) RoHS : Compliant | 0 | |||
| IS46LQ32K01S2A-046BLA3 | Integrated Silicon Solution Inc | 32Gb x16 x 2 channel Mobile LPDDR4LPDDR4X (Alt: IS46LQ32K01S2A-046BLA3) RoHS : Compliant | 0 | |||
| IS62WV51216BLL-55TLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 33V 8MBit 512K x 16 55ns 44Pin TSOPII TR (Alt: IS62WV51216BLL-55TLI-TR) RoHS : Compliant | 0 | |||
| IS61WV102416BLL-10MLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 25V33V 16MBit 1M x 16 10ns 48Pin TFBGA TR (Alt: IS61WV102416BLL-10MLI-TR) RoHS : Compliant | 0 | |||
| SDRIS61WV102416BLL-10MLI | Integrated Silicon Solution Inc | 16MbHighSpeedAsync1Mbx168ns33vor 10ns24v36v 48 Ball mBGA 9x11 mm RoHS (Alt: IS61WV102416BLL-10MLI) RoHS : Compliant | 0 | |||
| IS64WV204816BLL-12BLA3-TR | Integrated Silicon Solution Inc | (Alt: IS64WV204816BLL-12BLA3-TR) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | IC-TL6-BLCC-1206-1R | iC-Haus | Pointsource LED (300um) |
| 0 | |
 Chip-Germany GmbH | BPE-0388-3BG026-BL | Emulation Technology Inc | 6 | |||
 Component Electronics, Inc | BC856BLT1 | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,739 | |
| MMBZ5226BLT1 | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,841 | ||
| MMBZ5226BLT1 | ON SMEI | IN STOCK SHIP TODAY |
| 2,700 | ||
| MMBZ5226BLT1 | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,680 | ||
| BC846BLT1G | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,875 | ||
| MMBZ5256BLT1 | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,539 | ||
| HS-101-1/16-BLACK | Insultab | IN STOCK SHIP TODAY |
| 400 | ||
| HM62256BLFP-8T | Hitachi Ltd | IN STOCK SHIP TODAY |
| 193 | ||
| IU-7/16-BLUE | Canare Electric Co Ltd | IN STOCK SHIP TODAY |
| 117 | ||
| MB156W-26-BL | TCI | IN STOCK SHIP TODAY |
| 100 | ||
| CB26-BLU | Canare Electric Co Ltd | IN STOCK SHIP TODAY |
| 94 | ||
| K1526BLC-20.0000MHZ | CTI Electronics Corporation | IN STOCK SHIP TODAY | 83 | |||
HM65256BLP-10 | Hitachi Ltd | IN STOCK SHIP TODAY RoHS : Not Compliant | 28 | |||
| QMV306BL5 | Nortel Networks | IN STOCK SHIP TODAY | 3 | |||
| SB151-006-BLACK | Sifam Meters | IN STOCK SHIP TODAY |
| 2 | ||
 DB Roberts | ABA46/BLACK | Industrial Rivet & Fastener Company | RIVET |
| 9,000 | |
| VRF-125X750-16BLK | Caplugs |
| 7,036 | |||
| VC-312-16-BLK | Caplugs |
| 4,000 | |||
| VC-312-16-BLUE | Shercon Inc |
| 1,726 | |||
| VC-625-16 BLUE | Caplugs |
| 1,325 | |||
| VC-1000-16-BLK | Caplugs |
| 326 | |||
| VC-500-16-BLACK | Caplugs |
| 322 | |||
| VC-125-16-BLUE | Caplugs |
| 270 | |||
| CLM-6-BLPT-90 | Carr Lane Manufacturing Co Inc |
| 8 | |||
| DSI-350-16-BL | Sugatsune Kogyo Co Ltd | STAINLESS EDGE PULL, BLACK | 0 | |||
| CHC-S26BL | Sugatsune Kogyo Co Ltd | SPLIT CABLE GROMMET | 0 | |||
| 29F516BL | Essentra Components | FLOWERETTE PRESS LOCK THUMB SC | 0 | |||
| 29R516BL | Essentra Components | ROUND PRESS LOCK THUMB SCREW K | 0 | |||
| RKW-6-6-BL | Essentra Components | CABLE TIE, HOOK LOOP, BLUE | 0 | |||
| APD-KH66-BL | Sugatsune Kogyo Co Ltd | VENTILATOR W CABLE GROMMET B | 0 | |||
 EBV Elektronik | BC856BLT1G | onsemi | Bipolar BJT Single Transistor General Purpose PNP 65 V 100 mA 225 mW SOT23 Surface Mount (Alt: BC856BLT1G) RoHS : Compliant | 870,000 | ||
| BC846BLT3G | onsemi | Bipolar BJT Single Transistor NPN 65 V 100 mA 225 mW SOT23 Surface Mount (Alt: BC846BLT3G) RoHS : Compliant | 320,000 | |||
| SBC856BLT1G | onsemi | PNP Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: SBC856BLT1G) RoHS : Compliant | 267,000 | |||
| SBC856BLT3G | onsemi | PNP Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: SBC856BLT3G) RoHS : Compliant | 20,000 | |||
| BC846BLT1G | onsemi | Bipolar BJT Single Transistor NPN 65 V 100 mA 300 mW SOT23 Surface Mount (Alt: BC846BLT1G) RoHS : Compliant | 0 | |||
| PD204-6B/L3 | Everlight Electronics Co Ltd | (Alt: 3302040303) RoHS : Compliant | 0 | |||
| SBC846BLT3G | onsemi | NPN Bipolar Transistor ONSSPCTRNSTVU6M5P (Alt: SBC846BLT3G) RoHS : Compliant | 0 | |||
| MMBZ5226BLT1G | onsemi | Zener Single Diode 33 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5226BLT1G) RoHS : Compliant | 0 | |||
| MMBZ5246BLT1G | onsemi | Zener Single Diode 16 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5246BLT1G) RoHS : Compliant | 0 | |||
| MMBZ5236BLT1G | onsemi | Zener Single Diode 75 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5236BLT1G) RoHS : Compliant | 0 | |||
| ACPF-W066-BLK | Broadcom Limited | 6GHz WiFi Bandpass Filter for Coexistence with 6GHz WiFi (Alt: ACPF-W066-BLK) RoHS : Compliant | 0 | |||
| 2SC3326-B,LF(T | Toshiba America Electronic Components | Transistor GP BJT NPN 20V 300mA 3Pin TO236MOD Emboss TR (Alt: 2SC3326-B,LF(T) RoHS : Compliant | 0 | |||
| SZMMBZ5256BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5256BLT1G) RoHS : Compliant | 0 | |||
| SGM706B-LXS8G/TR | SG Micro Corp | (Alt: SGM706B-LXS8G/TR) RoHS : Compliant | 0 | |||
| 2SC4116-BL,LHIJF(T | Toshiba America Electronic Components | Transistor Silicon NPN Epitaxial Type PCT process (Alt: 2SC4116-BL,LHIJF(T) RoHS : Compliant | 0 | |||
 ECCO | F2211/16-BLACK-18 | Alpha Wire |
| 12 | ||
| FIT2211/16-BLACK-36X6-IN | Alpha Wire |
| 12 | |||
 FDH Electronics | W3B2 19/6 BLACK 4FT | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 5,582 | ||
| 3/16-BLACK-AL | SUMITOMO ELECTRIC Industries Ltd | Cable Protect | 2,174 | |||
| 3/16-BLUE-INCH | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 1,132 | |||
| TT-16 BLACK | Weico Wire & Cable Inc | Identification | 1,040 | |||
| F4(Z)-1/16-BLACK-S | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 750 | |||
| ALPHA 25106 BLK | Alpha Wire | Wire and Cable | 550 | |||
| VC625-16-BLK | Caplugs | Connector Acc | 269 | |||
| 3/16-BLACK-INCH | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 40 | |||
| VC750-16-BLK | Caplugs | Connector Acc | 21 | |||
| S-13756BLU | FDH Electronics | Wire Placehldr | 1 | |||
| W3B2 (4X) 24/6 BLACK 4FT | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 0 | |||
| B2 (3X) 18/6 BLACK SPL | SUMITOMO ELECTRIC Industries Ltd | Terminals & Spl | 0 | |||
| SM3-12 3/16 BLACK SPL | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 0 | |||
| SM3-23 3/16 BLACK SPL | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 0 | |||
| B2 (3X) 18/6 BLUE SPL | SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | 0 | |||
 Flip Electronics | ICS9DB306BLLF | Integrated Device Technology Inc | Stock RoHS : Compliant | 90,000 | ||
9DB306BLLFT | Integrated Device Technology Inc | Stock RoHS : Compliant | 90,000 | |||
| 9DB306BLLF | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 90,000 | ||
| IDT9DB306BLLF | Integrated Device Technology Inc | Stock | 90,000 | |||
| MMBZ5256BLT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 50,925 | ||
| BC846BLT3G | onsemi | Stock, Ship Today RoHS : Compliant |
| 29,470 | ||
| BC846BLT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 18,694 | ||
| MMBZ5226BLT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 15,000 | ||
| SZMMBZ5226BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 6,000 | |||
| MMBZ5236BLT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,880 | ||
| NCP1246BLD065R2G | onsemi | Stock, Ship Today RoHS : Compliant | 2,500 | |||
| NCP1246BLD100R2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,500 | ||
| FDPF041N06BL1-F154 | onsemi | Stock, Ship Today RoHS : Compliant |
| 670 | ||
| FDPF041N06BL1 | onsemi | Stock RoHS : Compliant | 670 | |||
 Maritex | BC856BLT1G | onsemi | Bipolar Transistors (BJT); BC856BLT1G; ON SEMICONDUCTOR; PNP; 3; 65 V; 100 mA RoHS : Compliant |
| 116,971 | |
| SS36BL | LGE | Shottky Diode; 60V; 3A; -55+150 st.C; SMD; DO214AA(SMB) |
| 6,000 | ||
| PD204-6B/L3 | Everlight Electronics Co Ltd | Fiber Optic Transceivers; PD204-6B/L3; EVERLIGHT; Yes RoHS : Compliant |
| 3,234 | ||
| MJ06BL-CT | CONNTHERM | Mini-Jumper; height 6.0mm; pitch 2.54mm; open cover; blue |
| 2,102 | ||
| BC846BLT1G | onsemi | Transistor: NPN; bipolar; 65V; 0.1A; 0.225W; -55+150 deg.C; SMD; SOT23 RoHS : Compliant |
| 403 | ||
| MMBZ5236BLT1G | onsemi | Zener Diodes; MMBZ5236BLT1G; ON SEMICONDUCTOR; 3; 225 mW; 7.5 V; 3 �A RoHS : Compliant |
| 94 | ||
| M2516B-LN | BEISIT | Cabe gland M25; nylon; M25x1.5 9-16mm; flat O-ring; with lock nut; black; for wrench 33 |
| 50 | ||
| P0906B-LN | BEISIT | Cable gland PG9; nylon; Pg9 2-6mm; black; with lock nut; flat O-ring; for wrench 19 |
| 50 | ||
| P2116B-LN | BEISIT | Cable gland PG21; nylon; PG21 9-16mm; black; flat O-ring; with lock-nut; for wrench 33 |
| 50 | ||
| M1606B-LN | BEISIT | Cabel gland M16; nylon; M16 2-6mm; black; with lock nut; for wrench 19 |
| 45 | ||
| SBC856BLT1G | onsemi | Bipolar Transistors (BJT); SBC856BLT1G; ON SEMICONDUCTOR; PNP; 3; 65 V; 100 mA RoHS : Compliant |
| 3 | ||
 Master Electronics | FIT2211/16-BLACK-25X4 | Alpha Wire | FIT-221 1/16 BLACK - 25x4ft/Pkg RoHS : Compliant |
| 2,870 | |
| 26-BLK | Mueller Electric Company | Cable Clamps and Clips Clip Vinyl Black RoHS : Not Compliant |
| 2,705 | ||
| 17406-BLK-B1 | Volex Group | Cable Assembly AC Power 1.83m NEMA 5-15P 3 POS M 18AWG RoHS : Compliant |
| 97 | ||
| F1053/16-BLACK-25 | Alpha Wire | FIT1053/16 BLACK 25 FT RoHS : Compliant |
| 34 | ||
| 1856-BLACK-100 | Alpha Wire | Hook-up Wire 20AWG 1.47mm Tinned Copper Black 600V - 30.48m (100ft)/Spool RoHS : Compliant |
| 7 | ||
| FIT221V1/16-BLACK-1000 | Alpha Wire | The FIT221V1/16-BLACK-1000 is a flame-retardant irradiated polyolefin heat shrink tubing with a 2:1 shrink ratio and a low shrink temperature. RoHS : Compliant |
| 5 | ||
| LC136-BLACK-1 | Alpha Wire | LC136 BLACK 500 YDS RoHS : Compliant |
| 4 | ||
| 5856-BL005 | Alpha Wire | Hook-up Wire 20AWG 1.5mm Silver Plated Copper - Blue - 600V Spool - 30.48m (100ft)/Spool RoHS : Compliant |
| 2 | ||
| F221L3/16-BLACK-200 | Alpha Wire | FIT221L3/16 BLACK 200FT RoHS : Compliant |
| 2 | ||
| Y282816/BL | Thomas & Betts | Y-PIECE PA66 28/28/16MM-BL RoHS : Compliant |
| 0 | ||
| N201-S06-BL | Tripp Lite | 6FT CAT6 NETWORK PATCH CABLE RoHS : Compliant |
| 0 | ||
| 7056-BL005 | Alpha Wire | Hook-up Wire - Stranded - 20 (7/28) AWG - PVC Blue - 100 ft - Tinned Copper RoHS : Compliant |
| 0 | ||
| HLCD-30-15.56-BLS-TRS-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-30-08.66-BLS-TR-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-40-15.16-BL-BR-3-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Neutron USA | N262-006-BL | Tripp Lite | CAT6A ETHERNET CABLE POE M/M BLUE 6FT RoHS : Compliant |
| 588 | |
N200-006-BL | Tripp Lite | 6FT CAT6 MOLDED PATCH CABLE GIGABIT RJ45 550MHZ 24AWG M/M BLUE RoHS : Compliant |
| 588 | ||
| M45PATCH6BL | StarTech | StarTech.com 6 ft Blue Molded Cat5e UTP Patch Cable |
| 344 | ||
| N201-S06-BL | Tripp Lite | CAT6 GIGABIT PATCH CABLE 5 MOLDED RJ45 M/M 550MHZ 24 AWG BLACK RoHS : Compliant |
| 50 | ||
| C6ASPAT6BL | StarTech | 6FT CAT6A BLUE ETHERNET STP CABLE |
| 50 | ||
| N6PATCH6BL | StarTech | 6ft Blue Cat6 |
| 50 | ||
| C6PATCH6BL | StarTech | StarTech.com 6 ft Blue Molded Cat6 UTP Patch Cable - ETL Verified |
| 50 | ||
| S45PATCH6BL | StarTech | StarTech.com 6 ft Cat5e Blue Snagless Shielded RJ45 F/UTP Cat 5e Patch Cable - 6ft Patch Cord |
| 50 | ||
| 07-26 BLK | Grayhill Inc | Switch; Pushbutton; SPDT; BBM; Black Button; Solder Terminals |
| 29 | ||
| CAT6PC-006-BL | Black Box Corporation | Black Box CAT6 Value Line Patch Cable, Stranded, Blue, 6-ft. (1.8-m) RoHS : Compliant |
| 26 | ||
| KSW26BLK-0100 | Jonard Tools | Hook-up Wire 26AWG LOW STRP FORCE 100' SPOOL BLACK |
| 22 | ||
N002-006-BL | Tripp Lite | Tripp Lite Cat5e 350MHz Molded Patch Cable RoHS : Compliant |
| 9 | ||
| N261P-006-BL | Eaton Corporation | 6FT CAT6A BLUE PATCH CABLE FUTP SNAGLESS W/ POE 10G CMR-LP M/M RoHS : Compliant |
| 0 | ||
| N105-006-BL | Eaton Corporation | 6FT CAT5E PATCH CABLE BLUE M/M MOLDED SHIELDED STP RJ45 350 MHZ RoHS : Compliant |
| 0 | ||
| AR8136BLK200 | APC by Schneider Electric | APC 1U 19" Black Modular Toolless Blanking Panel |
| 0 | ||
 Pasternack Enterprises US | PE3C8746/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/BL, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/BL is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-BL coax. | 351 | ||
| PE3C8746/BL-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/BL-36, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/BL-36 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-BL coax. |
| 105 | ||
| PE3C8746/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/BL-12, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/BL-12 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-BL coax. |
| 105 | ||
| PE3C8746/BL-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/BL-72, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/BL-72 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-BL coax. |
| 77 | ||
| PE3C8746/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/BL-120, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/BL-120 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax. |
| 46 | ||
| PE3C8746/BL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/BL-300, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/BL-300 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax. |
| 18 | ||
| PE3C8816/BL-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/BL-72, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/BL-72 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-BL coax. |
| 0 | ||
| PE3C10626/BL | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, RF Cable Part Number: 4694R-BL. 75 Ohm 1.0/2.3 Male to Trimmed Lead Cable Using 75 Ohm 4694R-BL Coax. PE3C10626/BL is a 1.0/2.3 male to cable using coax. This Pasternack 1.0/2.3 male to cable assembly uses a 75 Ohm 1.0/2.3 for connector 1 and a for connector 2. Our male 1.0/2.3 to cable assembly uses a cable type that is. Pasternack PE3C10626/BL 1.0/2.3 male to cable assembly is constructed with coax. | 0 | |||
| PE3C8816/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/BL-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/BL-120 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax. |
| 0 | ||
| PE3C8816/BL-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/BL-36, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/BL-36 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-BL coax. |
| 0 | ||
| PE3C8816/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/BL-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/BL-12 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax. |
| 0 | ||
| PE3C8816/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/BL, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/BL is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-BL coax. | 0 | |||
| PE3C8816/BL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/BL-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/BL-300 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-BL coax. |
| 0 | ||
| PE3W05086/BL/HS | Pasternack Enterprises | 0 | ||||
 TE Connectivity | USLPT3026BL1TR | TE Connectivity | TACT ULTRA JB 3.0X2.6X0.45 100GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Flush, Top Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Flush, Top Actuator Stainless Steel | Part Number: USLPT3026BL1TR | Internal Number: 2337227-1 | TE Connectivity RoHS : Compliant |
| 3,061 | |
| USLPT3026BL2TR | TE Connectivity | TACT ULTRA JB 3.0X2.6X0.45 160GF SPST-NO Contact Current Rating: 50 mA Actuator Style: Flush, Top Actuator Operating Function: NO Contact Base Material: Stainless Steel Switch Contact Plating Material: Silver Tactile Switch | 50 mA Flush, Top Actuator Stainless Steel | Part Number: USLPT3026BL2TR | Internal Number: 2337227-2 | TE Connectivity RoHS : Compliant |
| 1,037 | ||
 Vyrian | IS61WV102416BLL-10MLI-TR | Integrated Silicon Solution | Standard SRAM, 1MX16, 10ns, CMOS, PBGA48 | 17,078 | ||
| AP9101CK6-BLTRG1 | Diodes Incorporated | Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO6 | 16,517 | |||
| IS43TR16256BL-107MBLI-TR | Integrated Silicon Solution | DDR3L DRAM, 256MX16, CMOS, PBGA96 | 10,025 | |||
| MGA-65606-BLKG | Broadcom Limited | Wide Band Low Power Amplifier, 2500MHz Min, 4000MHz Max, 1 Func, GAAS RoHS : Compliant | 9,370 | |||
| MGA-635T6-BLKG | Broadcom Limited | Wide Band Medium Power Amplifier, 900MHz Min, 2400MHz Max, 1 Func, GAAS RoHS : Compliant | 8,865 | |||
| LM336BLPE3-2-5 | Texas Instruments | Two Terminal Voltage Reference, 1 Output, 2.49V, Trim/Adjustable, BIPolar, PBCY3 RoHS : Compliant | 7,924 | |||
| AT-42086-BLKG | Agilent Technologies Inc | RF Small Signal Bipolar Transistor, 0.08A I(C), 1-Element, C Band, Silicon, NPN RoHS : Compliant | 6,026 | |||
| MGA-30216-BLKG | Broadcom Limited | Wide Band Medium Power Amplifier, 1700MHz Min, 2700MHz Max, 1 Func, GAAS RoHS : Compliant | 5,939 | |||
| MGA-31816-BLKG | Broadcom Limited | Wide Band Low Power Amplifier, 1500MHz Min, 4000MHz Max, 1 Func, GAAS RoHS : Compliant | 5,264 | |||
| MGA-13516-BLKG | Broadcom Limited | Wide Band Medium Power Amplifier, 400MHz Min, 1500MHz Max, 1 Func, GAAS RoHS : Compliant | 3,218 | |||
| AX88796BLI | Asix Electronics | LAN Controller, 2 Channel(s), 12.5MBps, CMOS, PQFP64 | 862 | |||
| FIT221-3/16-BLK | Alpha Wire | HEAT SHRINK TUBE, CROSSLINKED POLYOLEFIN, 4.74 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 677 | |||
| FIT-221-1/16BL001 | Alpha Wire | HEAT SHRINK TUBE, CROSSLINKED POLYOLEFIN, 1.60 ID Before Shrink, 2:1 Shrink Ratio, BLUE RoHS : Compliant | 510 | |||
| IS64WV204816BLL-12BLA3-TR | Integrated Silicon Solution | Standard SRAM | 448 | |||
| MSA-0686-BLKG | Agilent Technologies | Wide Band Low Power Amplifier, 0MHz Min, 800MHz Max, 1 Func, BIPolar | 309 | |||
 Waytek, Inc. | 602071-736 BLACK | QuickCable Corporation | Battery Clamp Extra Heavy Duty 800 Amp, Black, 1/0 to 2/0 |
| 36 | |
 Win Source Electronics | BC846BLT3G | onsemi | TRANS NPN 65V 0.1A SOT23-3 RoHS : Compliant |
| 443,550 | |
| MMBZ5226BLT1G | onsemi | DIODE ZENER 3.3V 225MW SOT23-3 RoHS : Compliant |
| 150,000 | ||
| IS61WV25616BLL-10BLI | Integrated Silicon Solution Inc | IC SRAM 4MBIT 10NS 48MINIBGA / SRAM Chip Async Single 2.5V/3.3V 4M-bit 256K x 16 10ns 48-Pin Mini-BGA RoHS : Compliant |
| 14,393 | ||
| IS62WV51216BLL-55TLI-TR | Integrated Silicon Solution Inc | IC SRAM 8MBIT 55NS 44TSOP RoHS : Compliant |
| 12,120 | ||
| IS42S16800F-6BLI | Integrated Silicon Solution Inc | IC DRAM 128MBIT PAR 54TFBGA RoHS : Compliant |
| 11,520 | ||
| IS62WV12816BLL-55TLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 3.3V 2M-bit 128K x 16 55ns 44-Pin TSOP-II / IC SRAM 2MBIT 55NS 44TSOP RoHS : Compliant |
| 10,000 | ||
| IS42S16800F-6BLI-TR | Integrated Silicon Solution Inc | IC SDRAM 128MBIT 166MHZ 54BGA / DRAM Chip SDRAM 128Mbit 8Mx16 3.3V 54-Pin TFBGA T/R RoHS : Compliant |
| 9,690 | ||
| IS64WV51216BLL-10CTLA3 | Integrated Silicon Solution Inc | 512K x 16 HIGH-SPEED ASYNCHRONOUS CMOS STATIC RAM WITH 3.3V SUPPLY | IC SRAM 8M PARALLEL 44TSOP II RoHS : Compliant |
| 8,810 | ||
| IS43TR16256BL-107MBL | Integrated Silicon Solution Inc | IC DRAM 4GBIT PARALLEL 96TWBGA / SDRAM - DDR3L Memory IC 4Gb (256M x 16) Parallel 933 MHz 20 ns 96-TWBGA (9x13) RoHS : Compliant |
| 6,000 | ||
| IS43TR16256BL-107MBLI-TR | Integrated Silicon Solution Inc | DDR3-1600 256Mx16 (4Gb) RoHS : Compliant |
| 5,430 | ||
| AX88796BLI | ASIX Electronics Corporation | Low-pin-count Non-PCI 8/16-bit 10/100M Fast Ethernet Controller / Ethernet CTLR Single Chip 10Mbps/100Mbps 1.8V/3.3V 64-Pin LQFP RoHS : Compliant |
| 4,500 | ||
| IS46TR16256BL-125KBLA2 | Integrated Silicon Solution Inc | IC DRAM 4GBIT PARALLEL 96TWBGA RoHS : Compliant |
| 3,800 | ||
| IS61WV204816BLL-10BLI | Integrated Silicon Solution Inc | IC SRAM 32MBIT PARALLEL 48TFBGA RoHS : Compliant |
| 3,000 | ||
| IS46TR16256BL-125KBLA1-TR | Integrated Silicon Solution Inc | IC DRAM 4GBIT PARALLEL 96TWBGA / SDRAM - DDR3L Memory IC 4Gb (256M x 16) Parallel 800 MHz 20 ns 96-TWBGA (9x13) RoHS : Compliant |
| 1,720 | ||
| IS62WV25616BLL-55BLI | Integrated Silicon Solution Inc | 256K x 16 LOW VOLTAGE, ULTRA LOW POWER CMOS STATIC SRAM | IC SRAM 4M PARALLEL 48MINIBGA RoHS : Compliant |
| 811 | ||
 Wuhan P&S | BC846BLT3G | onsemi | General Purpose Transistors NPN Silicon RoHS : Compliant |
| 166,490 | |
| MMBZ5246BLT1G | onsemi | Zener Voltage Regulators 225 mW SOT23 Surface Mount RoHS : Compliant |
| 117,000 | ||
| SZMMBZ5246BLT1G | onsemi | RoHS : Compliant |
| 111,000 | ||
| MMBZ5226BLT1G | onsemi | Zener Voltage Regulators 225 mW SOT23 Surface Mount RoHS : Compliant |
| 42,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand