| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
6908G-SH2-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | 6469083-1 | TE Connectivity | - Rail/Tube (Alt: 6469083-1) RoHS : Compliant |
| 21,340 | |
| 6469081-1 | TE Connectivity | - Rail/Tube (Alt: 6469081-1) RoHS : Compliant |
| 8,592 | ||
| 2386908-3 | TE Connectivity | Circular Cable Assembly, Series 1, Circular Receptacle to Free End, 4 Positions, 6.6 ft, 2 m - Bulk (Alt: 70AJ5442) RoHS : Not Compliant |
| 0 | ||
| EV6908-J-00A | Monolithic Power Systems | Evaluation Board, MP6908GJ-Z, Synchronous Rectifier (Alt: EV6908-J-00A) RoHS : Compliant |
| 0 | ||
| 2386908-3 | TE Connectivity | Circular Cable Assembly, Series 1, Circular Receptacle to Free End, 4 Positions, 6.6 ft, 2 m - Bag (Alt: 2386908-3) RoHS : Not Compliant | 0 | |||
| 1469083-3 | TE Connectivity | - Rail/Tube (Alt: 1469083-3) RoHS : Not Compliant |
| 0 | ||
| 690813-1 | TE Connectivity | - Bag (Alt: 690813-1) RoHS : Not Compliant | 0 | |||
| 53426-9080 | Molex | Pin Header, 8 Contacts, 1 Row, 2.5mm, Matte Tin, 3A, Right Angle, Shrouded, Phosphor Bronze, THT RA - Bulk (Alt: 0534269080) RoHS : Compliant |
| 0 | ||
| 1583690-8 | TE Connectivity | - Bag (Alt: 1583690-8) RoHS : Not Compliant |
| 0 | ||
| 690816-2 | TE Connectivity | - Bulk (Alt: 690816-2) RoHS : Compliant | 0 | |||
| 7-2266908-7 | TE Connectivity | - Bag (Alt: 7-2266908-7) RoHS : Not Compliant |
| 0 | ||
| 015312690853-M | TE Connectivity | PR-750-10000-0853 W/SET SCR-BRAZED CCR4M - Bulk (Alt: 015312690853-M) RoHS : Not Compliant |
| 0 | ||
| ZW-03-10-F-S-669-080 | Samtec Inc | - Bulk (Alt: ZW-03-10-F-S-669-080) RoHS : Compliant |
| 0 | ||
| 690802-000 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 690802-000) RoHS : Not Compliant |
| 0 | ||
| 690801-2 | TE Connectivity | - Bulk (Alt: 690801-2) RoHS : Not Compliant | 0 | |||
![]() Newark | LTC6908CS6-1#TRPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908CS6-1#TRPBF RoHS : Compliant |
| 2,509 | |
| LTC6908CS6-1#TRPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908CS6-1#TRPBF RoHS : Compliant |
| 2,509 | ||
| LTC6908HS6-1#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908HS6-1#TRMPBF RoHS : Compliant |
| 1,449 | ||
| LTC6908HS6-1#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908HS6-1#TRMPBF RoHS : Compliant |
| 1,449 | ||
| LTC6908IDCB-1#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908IDCB-1#TRMPBF RoHS : Compliant |
| 690 | ||
| LTC6908IDCB-1#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908IDCB-1#TRMPBF RoHS : Compliant |
| 690 | ||
| LTC6908CS6-1#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908CS6-1#TRMPBF RoHS : Compliant |
| 550 | ||
| LTC6908CS6-1#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908CS6-1#TRMPBF RoHS : Compliant |
| 550 | ||
| LTC6908HS6-2#WTRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908HS6-2#WTRMPBF RoHS : Compliant |
| 483 | ||
| LTC6908IS6-1#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908IS6-1#TRMPBF RoHS : Compliant |
| 470 | ||
| LTC6908IS6-1#TRMPBF | Analog Devices Inc | Osc, Spread Spectrum, Cmos, 50Khz-10Mhz; |Analog Devices, Inc. LTC6908IS6-1#TRMPBF RoHS : Compliant |
| 470 | ||
| 2386908-3 | TE Connectivity | Cir Cable, Rcpt-Free End, Rev, 4P, 2M; Connector To Connector:Circular Receptacle To Free End; No. Of Positions:4Positions; Cable Length - Imperial:6.6Ft; Cable Length - Metric:2M; Jacket Color:-; Product Range:- Rohs Compliant: Yes RoHS : Compliant |
| 192 | ||
| 69080 | Grip-On Tools | Screwdriver Set, Power Nut, 14 Piece; |Grip On Tools 69080 RoHS : Not Compliant |
| 9 | ||
| EV6908-J-00A | Monolithic Power Systems | Evaluation Board, Synchronous Rectifier; |Monolithic Power Systems (Mps) EV6908-J-00A RoHS : Compliant |
| 5 | ||
| 1546908-1 | TE Connectivity | Connector, Rj45, Receptacle, 8 Position, Panel; Modular Connector Type:Rj45 Jack; Port Configuration:1 X 1 (Port); No. Of Positions/Loaded Contacts (Per Port):8P8C; Lan Category:Cat5; Ip Rating:Ip67; Connector Mounting:Cable Mount Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | LTC6908HS6-2#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 27,827 | |
| LTC6908HS6-2#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 22,500 | ||
| LTC6908IDCB-2#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 19,601 | ||
| LTC6908IDCB-2#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 17,640 | ||
| LTC6908CDCB-2#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 14,018 | ||
| LTC6908CS6-1#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 8,353 | ||
| LTC6908CDCB-1#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 8,136 | ||
| LTC6908CDCB-1#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 7,580 | ||
| LTC6908HS6-1#WTRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 2,500 | ||
| LTC6908HS6-2#WTRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 2,500 | ||
| LTC6908HS6-2#WTRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 557 | ||
| LTC6908CS6-2#TRPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 486 | ||
| LTC6908HS6-1#TRMPBF | Analog Devices Inc | 2x Out Osc w/ SS Mod RoHS : Compliant |
| 122 | ||
| MAX16908RAUE50/V+ | Analog Devices Inc | 600mA, 2.1MHz, High-Voltage, M | 0 | |||
| MAX16908RAUE50/V+T | Analog Devices Inc | 600mA, 2.1MHz, High-Voltage, M | 0 | |||
![]() RS | 90816-0006 (908160006) | Molex | PICOFLEX SERIES, PCB MOUNT IDC CONNECTOR SOCKET, 6 WAY, 1 ROW, 1.27MM PITCH |
| 50 | |
| 69083149138 | Norton Winter | MOUNTED POINT, VITRIFIED BOND, QUANTUM, 3NQ CA,1IN. X 1/8IN. |
| 20 | ||
| BWA-9O2-C (76908) | Banner Engineering Corp | ANTENNA, RUBBER, 2DBI OMNI, SWIVAL, RSMA MALE, 902-928MHZ |
| 18 | ||
| 2369085 | RS Pro | MALE MICRO USB TYPE A TO FEMALE MICRO USB TYPE B 2.0 CABLE, 1.6FT (0.5M) |
| 17 | ||
| 2369083 | RS Pro | MALE USB TYPE A TO RIGHT ANGLE MALE MICRO USB TYPE B 2.0 CABLE, 6FT (2M) |
| 13 | ||
| 2369082 | RS Pro | MALE MICRO USB TYPE B TO MALE MICRO USB TYPE B 2.0 EXTENDED CABLE, 7.8IN (200MM) |
| 10 | ||
| 2269089 | RS Pro | HIGH RATIO HEAVY WALL HEAT SHRINK |
| 9 | ||
| 120066-0690 (884030K05M030) | Woodhead Molex | MICRO-CHANGE (M12) DOUBLE-ENDED CORDSET, 4 POLES, FEMALE TO MALE, 884030K05M030 |
| 6 | ||
| 2269080 | RS Pro | BLACK ADHESIVE LINED END CAP 5.72MM SLEEVE DIA X 30.35MM LENGTH 4:1 RATIO |
| 5 | ||
| 69083149133 | Norton Winter | QUANTUM VITRIFIED BOND MOUNTED POINT W154 3NQ80-OVS 80 GRIT, 3/16 X 1/8 IN. |
| 5 | ||
| 2846908 | RS Pro | 15M OM2 FIBRE OPTIC CABLE ST - SC (MULTI |
| 3 | ||
| 1SFA616908R9018 | ABB Low Voltage Products and Systems | TEXT CAP BLACK FLUSH SYMBOL |
| 2 | ||
| CPE14-M1BH-5J-QS-8 (196908) | Festo | VALVE, 5/2 BISTABLE, QS-8, G1/8, 24VDC, INT PILOT, 2 TO 8 BAR, 680L/MIN |
| 2 | ||
| 2269083 | RS Pro | HEAVY WALL ADHESIVE LINED HEAT SH |
| 1 | ||
| 6908 | Koyo Encoder Inc | BALL BEARING, RADIAL, 40MM ID, 62MM OD |
| 0 | ||
![]() Bisco Industries | F6-908 | Southco | 4,782 | |||
| VC-690-8 BLACK | Caplugs | 2,400 | ||||
| 6908-SS-20 | RAF Electronic Hardware | 728 | ||||
| MS35690-822 | MS Nuts | 300 | ||||
| MS35690-827 | MS Nuts | 50 | ||||
| NAS1669-08L5 | NAS Rivets | 48 | ||||
| MS21069-08 | MS Nuts | 14 | ||||
| 051-328-6908229 | ITT Interconnect Solutions | 6 | ||||
| MS35690-802 | MS Nuts | 2 | ||||
| MS35690-810 | MS Nuts | 1 | ||||
| 6908-SS | RAF Electronic Hardware | 1 | ||||
![]() Rochester Electronics | LTC6908IS6-1#TRMPBF | Analog Devices Inc | LTC6908-1 - 2 Phase 10kHz - 10MHz oscillator W/SSFM RoHS : Compliant |
| 69 | |
| MAX16908RAUE50/V+ | Analog Devices Inc | 600mA, 2.1MHz, High-Voltage, Mini-Buck C | 11,955 | |||
| MAX16908RAUE50/V+T | Analog Devices Inc | 600mA, 2.1MHz, High-Voltage, Mini-Buck C | 15,000 | |||
| LTC6908CS6-1#TRMPBF | Linear Technology | LTC6908-1 - 2 Phase 10kHz - 10MHz oscillator W/SSFM RoHS : Compliant |
| 400 | ||
| MAX16908XAUE50/V+ | Maxim Integrated Products | MAX16904 2.1Mhz, High-Voltage, 600mA, Mini-Buck Converter |
| 51,360 | ||
![]() Sager | 6469083-3 | TE Connectivity | Hard Metric Connectors HMZD 3PAIR, HDR ASSY, 25MM MOD RoHS : Compliant |
| 0 | |
| 8-1583690-8 | TE Connectivity | Bench Top Tools CRIMPER INSULATION O (.094) | 0 | |||
| 2386908-3 | TE Connectivity | Standard Circular Connector SQ.FL RCPT CONN CA, REV,SER1,SZ11-4,2.0M RoHS : Compliant | 0 | |||
| COOPER2690851D16 | ABB Group | COOPER 2690851D16 CONN ASY |
| 0 | ||
| 1469083-3 | TE Connectivity | High Speed / Modular Connectors HMZD 3PAIR, HDR ASSY, 25MM MOD RoHS : Not Compliant |
| 0 | ||
| 166-90811 | HellermannTyton | HELAGUARD NON-METALLIC ULTRA FITTING, 90-DEG ELBOW, IP68, M50 THREAD, 42MM DIA, PA66, BLACK, 2/PKG |
| 0 | ||
| 690813-1 | TE Connectivity | Bench Top Tools BLADE SLUG | 0 | |||
| COOPER2690851D20 | ABB Group | COOPER POWER 2690851D20 |
| 0 | ||
| 586908-000 | TE Connectivity | Wire Labels & Markers STD03W-C RoHS : Compliant |
| 0 | ||
| 0534269080 | Molex | Molex 2.50MM HDR 08P RA TH RoHS : Compliant |
| 0 | ||
| 0039269087 | Molex | Molex | 0 | |||
| 0387416908 | Molex | Barrier Terminal Blocks SR BTS FT BRS 8 ASY | 0 | |||
| ZW-20-12-G-D-669-085 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 1546908-1 | TE Connectivity | Modular Connectors / Ethernet Connectors RECEPTACLE KIT SHIELDED RoHS : Compliant | 0 | |||
| 1583690-8 | TE Connectivity | Crimpers / Crimping Tools CRIMPER INSULATION O .120 |
| 0 | ||
![]() TME | 690888-000 | TE Connectivity | Tip: solder sleeve RoHS : Not Compliant |
| 800 | |
| 14269088 | WIKA Instrument LP | Automation module: pressure switch; pressure; OUT 1: relay,SPDT |
| 24 | ||
| 690816-6 | TE Connectivity | Anvil |
| 2 | ||
| 213069-0800 | Molex | Tool: aplicator; 20AWG÷18AWG |
| 1 | ||
| 8-1879690-8 | TE Connectivity | Resistor: thin film; 100kΩ; THT; 500mW; ±0.1%; Ø3.7x10mm; axial RoHS : Compliant |
| 0 | ||
| 8690840000 | Weidmüller Interface GmbH & Co. KG | Socket; 12A; H: 77mm; W: 15.5mm; for DIN rail mounting; -40÷70°C RoHS : Compliant |
| 0 | ||
| 10056908 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 16; THT; 3A; 250V; SL 5 |
| 0 | ||
| 14269089 | WIKA Instrument LP | Automation module: pressure switch; pressure; OUT 1: relay,SPDT |
| 0 | ||
| 46908 | Wiha Quality Tools | Tool: interchangeable blade; Torx®; T20; 110mm; max.8Nm |
| 0 | ||
| 1569080000 | Weidmüller Interface GmbH & Co. KG | Cable gland; PG11; IP66,IP68; brass; silver; for cable; vg; 32x26mm RoHS : Compliant |
| 0 | ||
| 3-146-908 | Schurter Electronic Components | Switch: vandal resistant; Pos: 2; SPDT; MSM II; 3A/125VAC; ON-(ON) |
| 0 | ||
| 8690830000 | Weidmüller Interface GmbH & Co. KG | Socket; 12A; H: 77.6mm; W: 15.6mm; for DIN rail mounting; -40÷70°C RoHS : Compliant |
| 0 | ||
| 1769081 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON M; 12A; 630V RoHS : Compliant |
| 0 | ||
| 3769-08F | KING TONY | Wrench: rattle; 3/8"; 200mm; Teeth: 32 |
| 0 | ||
| 4269-08-A0 | KING TONY | Extension; impact; 1/2"; 195mm |
| 0 | ||
![]() Ameya Holding Limited | LTC6908IS6-1#TRPBF | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 RoHS : Compliant | 370 | ||
![]() ComSIT USA | JZ505416908 | STORA ENSO | AVAILABLE EU | 13,337 | ||
![]() ComSIT USA | RA6908105MRD | Coilcraft Inc | Inductor, Coilcraft, RA series, 105 �H, SMT RoHS : Compliant | 13,500 | ||
![]() Interstate Connecting Components | 8-1879690-8 | TE Connectivity | H4 100K 0.1% 100PPM RoHS : Compliant |
| 0 | |
| 6469083-3 | TE Connectivity | HMZD 3PAIR, HDR ASSY, 25MM MOD RoHS : Compliant |
| 0 | ||
| 1469083-3 | TE Connectivity | HMZD 3PAIR, HDR ASSY, 25MM MOD RoHS : Not Compliant |
| 0 | ||
| 9-1879690-8 | TE Connectivity | H4 127K 0.1% 100PPM RoHS : Compliant |
| 0 | ||
| 10-769082-000N | Amphenol Aerospace | 10-769082-000N | 0 | |||
| 62GB106908 | Amphenol PCD | 62GB | 0 | |||
| 1583690-8 | TE Connectivity | CRIMPER, INSULATION O (.120 ) |
| 0 | ||
| 7-2266908-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-079F1 |
| 0 | ||
| 1879690-8 | TE Connectivity | H4 14K7 0.1% 100PPM RoHS : Compliant |
| 0 | ||
| 015312690853-M | TE Connectivity | PR-750-10000-0853 W/SET SCR-BR | 0 | |||
| 4-1879690-8 | TE Connectivity | H4 38K3 0.1% 100PPM RoHS : Compliant |
| 0 | ||
| 690802-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCB-028-00 RoHS : Not Compliant | 0 | |||
| 8-2176690-8 | TE Connectivity | MELF SMA-Q 9K09 0.1% 25PPM 020 RoHS : Compliant | 0 | |||
| CQ69083001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55/9952-14-2(LAT3) RoHS : Compliant | 0 | |||
| 69082 | TE Connectivity | DYNA-CRP HD AMPOWER 400-1000M |
| 0 | ||
![]() PEI Genesis | 6908 | SOURIAU-SUNBANK |
| 0 | ||
| S3684FM6908A2.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| S3715FM-A6908A12 | SOURIAU-SUNBANK |
| 0 | |||
| S4304FM6908A34-R | SOURIAU-SUNBANK |
| 0 | |||
| SE30FMR6908ARS2.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| SE53FM6908A4R | SOURIAU-SUNBANK |
| 0 | |||
| SE57FM6908ASE-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE1FMR6908ES-2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4024S6908-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FM6908F1.5R12 | SOURIAU-SUNBANK |
| 0 | |||
| 16-9083B0-0020-22P14 | SOURIAU-SUNBANK |
| 0 | |||
| S4024R6908-34-2 | SOURIAU-SUNBANK |
| 0 | |||
| S4173FM6908S1.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FM6908A1.5R34 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FMR6908A2.0R12 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 586908-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 792 | |
| M10-676908-199A | Amphenol Corporation | Connector |
| 655 | ||
| M10-676908-239A | Amphenol Corporation | Connector |
| 591 | ||
| 6469083-3 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 237 | ||
| M10-676908-199B | Amphenol Corporation | Connector |
| 221 | ||
| M10-676908-13HA | Amphenol Corporation | Connector |
| 146 | ||
| M10-676908-25HA | Amphenol Corporation | Connector |
| 127 | ||
| M10-676908-099N | Amphenol Corporation | Connector |
| 96 | ||
| 88-552069-08G | Amphenol Corporation | RECEPT |
| 16 | ||
| 1583690-8 | TE Connectivity | CRIMPER, INSULATION O (.120 ) |
| 2 | ||
| 88-565869-08G | Amphenol Corporation | PLUG |
| 2 | ||
| 91-565869-08G | Amphenol Corporation | PLUG |
| 2 | ||
| 7-1583690-8 | TE Connectivity | Tools RoHS : Unknown |
| 2 | ||
| 91-565869-08P | Amphenol Corporation | PLUG |
| 2 | ||
| 690816-6 | TE Connectivity | Connectors |
| 1 | ||
![]() Richardson RFPD | LTA/GTRB266908FC-E2 | MACOM | Doherty Evaluation Board, 2515-2675 MHz RoHS : Compliant | 0 | ||
| LTC6908CS6-1#TRPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908HS6-1#TRMPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908HS6-1#WTRPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908IDCB-1#TRPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908HS6-2#TRPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908CS6-1#TRMPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908IDCB-1#TRMPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908IS6-1#TRMPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908CS6-2#TRPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908HS6-2#WTRMPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908IDCB-2#TRMPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| LTC6908CS6-2#TRMPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
| GTRB266908FC-V1-R2 | MACOM | Trans RF MOSFET 125V 13.5A 7-Pin Case H-37248KC-6/ RoHS : Compliant | 0 | |||
| LTC6908IS6-2#TRPBF | Analog Devices Inc | Spread Spectrum Silicon Oscillator - 0.05MHz to 10 RoHS : Compliant |
| 0 | ||
![]() Rutronik | 10169084-128KALF | Amphenol Communications Solutions | 1.8MM WIRE TO BOARD-HEADER RoHS : Compliant |
| 10 | |
![]() Chip 1 Exchange | 87369-0800 | Molex | INSTOCK RoHS : Compliant | 581,659 | ||
| 30140690820 | Kostal GmbH & Co KG | INSTOCK | 218,400 | |||
| BSS138N H6908 | Infineon Technologies AG | INSTOCK | 30,000 | |||
| 1469081-2 | TE Connectivity | INSTOCK RoHS : Not Compliant | 8,526 | |||
| 36769-0832 | Molex | INSTOCK | 6,500 | |||
| 44769-0802 | Molex | INSTOCK RoHS : Compliant | 5,124 | |||
| 586908-000 | TE Connectivity | INSTOCK RoHS : Compliant | 3,510 | |||
| AON6908ALS | INSTOCK | 2,169 | ||||
| 6469083-2 | TE Connectivity | INSTOCK RoHS : Compliant | 1,950 | |||
| 15369084 | DELPH | INSTOCK | 624 | |||
| 1469081-1 | TE Connectivity | INSTOCK RoHS : Not Compliant | 20 | |||
| LTC6908IS6-2#TRPBF | LTECH | INSTOCK | 3 | |||
![]() Avnet Abacus | 6469081-1 | TE Connectivity | Connector HMZd 60 Contacts 25 mm Receptacle Press Fit 6 Rows (Alt: 6469081-1) RoHS : Compliant | 2,520 | ||
| 6469081-1 | TE Connectivity | Connector HMZd 60 Contacts 25 mm Receptacle Press Fit 6 Rows (Alt: 6469081-1) RoHS : Compliant | 100 | |||
| 1769087 | Phoenix Contact | Pluggable Terminal Block 35 mm 5 Ways 15 mm Screw (Alt: 1769087) RoHS : Compliant | 50 | |||
| 690816-2 | TE Connectivity | (Alt: 690816-2) RoHS : Compliant | 0 | |||
| 6469083-3 | TE Connectivity | (Alt: 6469083-3) RoHS : Compliant | 0 | |||
| 447690802 | Molex | (Alt: 447690802) RoHS : Compliant | 0 | |||
| 447690802 | Molex | (Alt: 447690802) RoHS : Compliant | 0 | |||
| 1546908-1 | TE Connectivity | Conn RJ45 RCP 8 POS Crimp ST Panel Mount 8 Terminal 1 Port Cat 5 (Alt: 1546908-1) RoHS : Compliant | 0 | |||
| 1583690-8 | TE Connectivity | (Alt: 1583690-8) RoHS : Not Compliant | 0 | |||
| 1583690-8 | TE Connectivity | (Alt: 1583690-8) RoHS : Not Compliant | 0 | |||
| 586908-000 | TE Connectivity | Cable Marker SnapOn Marker C Polyoxymethylene White Strip (Alt: 586908-000) RoHS : Compliant | 0 | |||
| 586908-000 | TE Connectivity | Cable Marker SnapOn Marker C Polyoxymethylene White Strip (Alt: 586908-000) RoHS : Compliant | 0 | |||
| 690801-000 | TE Connectivity | (Alt: 690801-000) RoHS : Not Compliant | 0 | |||
| 8-1583690-8 | TE Connectivity | CRIMPER INSULATION O 094 (Alt: 8-1583690-8) RoHS : Not Compliant | 0 | |||
| M80-8690822 | Harwin | Datamate LTek DIL Male Vertical 3mm PC Tail Connector unlatched selective gold tinlead (Alt: M80-8690822) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | M1001-06908 | Amphenol Corporation | NAFI CONNECTOR (Alt: M1001-06908) RoHS : Compliant | 0 | ||
| PI3EQX16908GLZLEX | Diodes Incorporated | (Alt: PI3EQX16908GLZLEX) RoHS : Compliant | 0 | |||
| BA6908F-GE2 | ROHM Semiconductor | 1-Phase Full Wave Motor Driver 2.6V to 14V 8-Pin SOP Emboss T/R (Alt: BA6908F-GE2) RoHS : Compliant | 0 | |||
| 6469085-1 | TE Connectivity | Conn Hard Metric HDR 60 POS 2.5mm Press Fit ST Thru-Hole (Alt: 6469085-1) RoHS : Compliant | 0 | |||
| 6469081-1 | TE Connectivity | (Alt: 6469081-1) RoHS : Compliant | 0 | |||
![]() Avnet Silica | 856908TR | Qorvo | SAW Duplexer 8365MHz 8815MHz CSMP (Alt: 856908TR) RoHS : Compliant | 0 | ||
| MP6908GJ-P | Monolithic Power Systems | (Alt: MP6908GJ-P) RoHS : Compliant | 0 | |||
| MP6908GJ-Z | Monolithic Power Systems | (Alt: MP6908GJ-Z) RoHS : Compliant | 0 | |||
| MP6908LGJ-P | Monolithic Power Systems | Fast TurnOff Intelligent Rectifier IC 45 V to 13 V Supply TSOT236 40 C to 125 C (Alt: MP6908LGJ-P) RoHS : Compliant | 0 | |||
| MP6908AGJ-P | Monolithic Power Systems | (Alt: MP6908AGJ-P) RoHS : Compliant | 0 | |||
| MP6908AGJ-Z | Monolithic Power Systems | (Alt: MP6908AGJ-Z) RoHS : Compliant | 0 | |||
| PI3EQX16908GLZLEX | Diodes Incorporated | RedriverEqualizer PCIe 40 3 V to 36 V Supply 40 to 85 C TQFN72 (Alt: PI3EQX16908GLZLEX) RoHS : Compliant | 0 | |||
| C16908_ALISE-50-M | LEDIL | Alise Reflector with 24 Degree Medium Beam Aluminum Metal Color Box (Alt: C16908_ALISE-50-M) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | LTC6908HS6 | Linear Technology | 1 | |||
![]() Component Electronics, Inc | 569088-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 147 | |
| 102690-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 133 | ||
| 569084-4 | TE Connectivity | IN STOCK SHIP TODAY |
| 65 | ||
| 569086-4 | TE Connectivity | IN STOCK SHIP TODAY |
| 31 | ||
| 269085-2 | TE Connectivity | IN STOCK SHIP TODAY | 2 | |||
| 1469085-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
| 1469083-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
![]() DB Roberts | F6-908 | Southco |
| 892 | ||
| F6-908-5 | Southco | RoHS : Compliant |
| 671 | ||
| 6908-SS-PL | RAF Electronic Hardware | 0 | ||||
| 1690-832-B-14 | RAF Electronic Hardware | 0 | ||||
| 6908-S-12 | RAF Electronic Hardware | 0 | ||||
| 1690-832-S-42 | RAF Electronic Hardware | 0 | ||||
| SS6908 | Heyco | SS-LOCK CRIMPLESS SUNBUNDLER 8 | 0 | |||
| 1690-832-SS | RAF Electronic Hardware | 0 | ||||
| 6908-S-12-PL | RAF Electronic Hardware | 0 | ||||
| SS6908-P | Heyco | SS-LOCK CRIMPLESS SUNBUNDLER 8 | 0 | |||
| 20546908 | Essentra Components | P0.418,0.361 C0.365,0.298SILIC | 0 | |||
| 6908-SS | RAF Electronic Hardware | 0 | ||||
| 6908-SS-PL-20 | RAF Electronic Hardware | 0 | ||||
| 1690-832-B-16 | RAF Electronic Hardware | 0 | ||||
| 1690-832-B | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | BSS138NH6908XTMA1 | Infineon Technologies AG | Power MOSFET N Channel 60 V 230 mA 35 Ohm SOT23 3 Pins Surface Mount (Alt: SP000924062) RoHS : Compliant | 0 | ||
| C16908_ALISE-50-M | LEDIL | Alise Reflector with 24 Degree Medium Beam Aluminum Metal Color Box (Alt: C16908_ALISE-50-M) RoHS : Compliant | 0 | |||
| SSDSC2KB480G7 956908 | Intel Corporation | INTEL SSD DC S4500 SERIES 480GB 25IN SATA 6GBS 3D1 TLC GENERIC 50 PACK (Alt: 956908) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M22759/43-26-908 | Whitmore/Wirenetics | Wire and Cable | 13,250 | ||
| M10-676908-09HB | Amphenol Aerospace | Connector Acc |
| 63 | ||
| M10-676908-13HN | Amphenol Aerospace | Connector Acc |
| 58 | ||
| 10-676908-13HN | Amphenol Aerospace | Connector 38999 | 55 | |||
| M10-676908-099N | Amphenol Aerospace | Connector Acc |
| 35 | ||
| M10-676908-219E | Amphenol Aerospace | Connector Acc |
| 23 | ||
| M10-676908-259E | Amphenol Aerospace | Connector 38999 |
| 20 | ||
| 10-676908-119C | Amphenol Aerospace | Connector Acc |
| 20 | ||
| M10-676908-21HE | Amphenol Aerospace | Connector Acc |
| 4 | ||
| M10-676908-239B | Amphenol Aerospace | Circular Conn |
| 3 | ||
| M39016/9-088P | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| M10-676908-199D | Amphenol Aerospace | Circular Conn | 0 | |||
| M10-676908-259D | Amphenol Aerospace | Connector Acc | 0 | |||
| M10-676908-119N | Amphenol Aerospace | Connector Acc |
| 0 | ||
| M39016/9-085L | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
![]() Master Electronics | 6469083-3 | TE Connectivity | Conn Hard Metric HDR 60 POS 2.5mm Solder ST Thru-Hole Tube RoHS : Compliant |
| 359 | |
| 8-1879690-8 | TE Connectivity | H4 100K 0.1% 100PPM RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-169-085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-269-084 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 8-1583690-8 | TE Connectivity | CRIMPER INSULATION O (.094) RoHS : Not Compliant |
| 0 | ||
| 2386908-3 | TE Connectivity | SQ.FL RCPT CONN CA REV SER1 SZ11-4 2.0M MOQ Reduction RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-269-084 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-269-083 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-169-083 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 690813-1 | TE Connectivity | BLADE SLUG RoHS : Not Compliant |
| 0 | ||
| 9-1879690-8 | TE Connectivity | H4 127K 0.1% 100PPM RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-169-089 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 586908-000 | TE Connectivity | STD03W-C RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-269-086 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-169-080 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE36908 | Pasternack Enterprises | 0 | |||
| PE3C6908-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 24 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 24 inch length using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908-24 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 24 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
| PE3C6908/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-48 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-48 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-48 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C6908 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. 4.3-10 Male to 4.3-10 Male Low Loss Cable Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable using LMR-400 coax with Times Microwave components. | 0 | |||
| PE3C6908-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 60 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 60 inch length using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908-60 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 60 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
| PE3C6908/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-24 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-24 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-24 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C6908/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-36 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-36 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-36 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C6908LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C6908/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-60 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-60 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-60 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C6908/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. 4.3-10 Male to 4.3-10 Male Low Loss Cable Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C6908/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 12 Inch Length Using LMR-400 Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C6908/HS-12 low loss 4.3-10 male to 4.3-10 male RF cable assembly using LMR-400 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3C6908/HS-12 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6908/HS-12 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. This PE3C6908/HS-12 4.3-10 plug to 4.3-10 plug cable assembly is built with LMR-400, which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C6908-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 48 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 48 inch length using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908-48 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 48 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
| PE3C6908-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 12 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 12 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 12 inch length using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908-12 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 12 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
| PE3W16908 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Female to SMA Male Cable Using LMR-240-UF Coax. PE3W16908 is a TNC female to SMA male cable using LMR-240-UF coax. This Pasternack TNC female to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our female TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16908 TNC female to SMA male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C6908-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 36 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 36 inch length using LMR-400 coax with Times Microwave components, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C6908-36 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C6908-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 36 inch length using LMR-400 coax with Times Microwave components. |
| 0 | ||
![]() Vyrian | LTC6908CDCB-1#TRPBF | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Compliant | 11,314 | ||
| LTC6908CDCB-1#TRMPBF | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Compliant | 11,234 | |||
| LTC6908CDCB-2#TRPBF | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Compliant | 10,936 | |||
| LTC6908CDCB-2-TRMPBF | Analog Devices Inc | 10,593 | ||||
| LTC6908CDCB-1#TRM | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Not Compliant | 8,699 | |||
| LTC6908CDCB-1-TRPBF | Analog Devices Inc | 8,694 | ||||
| LTC6908CDCB-1-TRMPBF | Analog Devices Inc | 8,288 | ||||
| LTC6908CDCB-2#PBF | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Compliant | 7,176 | |||
| LTC6908CDCB-1#PBF | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Compliant | 6,548 | |||
| LTC6908CDCB-1#TR | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Not Compliant | 6,050 | |||
| LTC6908CDCB-1 | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Not Compliant | 5,947 | |||
| LTC6908CDCB-2 | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Not Compliant | 5,893 | |||
| LTC6908CDCB-2#TRMPBF | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Compliant | 5,475 | |||
| LTC6908CDCB-2#TR | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Not Compliant | 5,300 | |||
| LTC6908CDCB-2#TRM | Analog Devices Inc | CMOS Output Clock Oscillator, 0.05MHz Min, 10MHz Max RoHS : Not Compliant | 5,292 | |||
![]() Win Source Electronics | LTC6908IS6-1#TRPBF | Linear Technology | Spread Spectrum Silicon Oscillator - 0.05MHz to 10MHz CMOS/Squarewave Automotive 6-Pin TSOT-23 T/R / IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 12,500 | |
| LTC6908HS6-1#TRPBF | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 12,000 | ||
| LTC6908IS6-1 | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 / IC RoHS : Not Compliant |
| 11,920 | ||
| LTC6908IS6-1#TRMPBF | Linear Technology | Spread Spectrum Silicon Oscillator - 0.05MHz to 10MHz CMOS/Squarewave Automotive 6-Pin TSOT-23 T/R / IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 11,560 | ||
| LTC6908IS6-1#TRM | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 RoHS : Not Compliant |
| 11,500 | ||
| LTC6908IS6-2#TRMPBF | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 / Oscillator, Silicon IC 50kHz ~ 10MHz TSOT-23-6 RoHS : Compliant |
| 11,270 | ||
| LTC6908CS6-1 | Linear Technology | Resistor Set SOT-23 Oscillator with Spread Spectrum Modulation RoHS : Not Compliant |
| 10,360 | ||
| LTC6908CS6-1#TRMPBF | Linear Technology | Spread Spectrum Silicon Oscillator - 0.05MHz to 10MHz CMOS/Squarewave Automotive 6-Pin TSOT-23 T/R / IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 9,640 | ||
| LTC6908CS6-1#TRPBF | Linear Technology | Spread Spectrum Silicon Oscillator - 0.05MHz to 10MHz CMOS/Squarewave Automotive 6-Pin TSOT-23 T/R / IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 9,520 | ||
| LTC6908IS6-2#TRPBF | Analog Devices Inc | IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 7,550 | ||
| LTC6908HS6-1#TRMPBF | Linear Technology | Spread Spectrum Silicon Oscillator - 0.05MHz to 10MHz CMOS/Squarewave Automotive 6-Pin TSOT-23 T/R / IC OSC SILICON PROG TSOT23-6 RoHS : Compliant |
| 6,852 | ||
| 6469081-1 | TE Connectivity | CONN RCPT HIGH SPEED 60P EDGE MT RoHS : Compliant |
| 5,680 | ||
| 6469083-1 | TE Connectivity | CONN HEADER HIGH SPEED 60POS PCB RoHS : Compliant |
| 4,500 | ||
| MP6908GJ-Z | Monolithic Power Systems | FAST TURN-OFF INTELLIGENT RECTIF RoHS : Compliant |
| 167 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |