| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
603HPF-R30 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | 0603H101N1R3BCU | Frontier Electronics Co Ltd | CAP CER 1.3PF 100V C0G/NP0 0603 |
| 885,000 | |
| 0603H101NR75BCU | Frontier Electronics Co Ltd | CAP CER 0.75PF 100V C0G/NP0 0603 |
| 495,000 | ||
| MGTC0603H51N_ST | Shenzhen Microgate Technology Co Ltd | FIXED IND 51 NH 370 MA 0.33 OHM |
| 12,000 | ||
| SF-0603HI100F-2 | Bourns Inc | FUSE BRD MNT 1A 35VAC/65VDC 0603 RoHS : Compliant |
| 5,749 | ||
| SF-0603HI100F-2 | Bourns Inc | FUSE BRD MNT 1A 35VAC/65VDC 0603 RoHS : Compliant |
| 5,749 | ||
| SF-0603HI100F-2 | Bourns Inc | FUSE BRD MNT 1A 35VAC/65VDC 0603 RoHS : Compliant |
| 5,749 | ||
| TR-0603HV500-R | Eaton Bussmann | FUSE BOARD MNT 500MA 63VDC 0603 |
| 5,716 | ||
| TR-0603HV500-R | Eaton Bussmann | FUSE BOARD MNT 500MA 63VDC 0603 |
| 5,716 | ||
| SF-0603HIA200M-2 | Bourns Inc | FUSE BOARD MOUNT 2A 32VDC 0603 RoHS : Compliant |
| 4,918 | ||
| SF-0603HIA200M-2 | Bourns Inc | FUSE BOARD MOUNT 2A 32VDC 0603 RoHS : Compliant |
| 4,918 | ||
| PTN0603H49R9BBT1 | Vishay Thin Film | PTN0603 50PPM 49.9 0.1% B T1 |
| 3,940 | ||
| PTN0603H49R9BBT1 | Vishay Thin Film | PTN0603 50PPM 49.9 0.1% B T1 |
| 3,940 | ||
| PTN0603H49R9BBT1 | Vishay Thin Film | PTN0603 50PPM 49.9 0.1% B T1 |
| 3,940 | ||
C0603H103J3GAFT100![]() | KEMET Corporation | CAP CER 10000PF 25V C0G/NP0 0603 RoHS : Compliant |
| 200 | ||
C0603H103J3GAFT100![]() | KEMET Corporation | CAP CER 10000PF 25V C0G/NP0 0603 RoHS : Compliant |
| 200 | ||
![]() Avnet Americas | PTN0603H4751BSTF | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0603H4751BSTF) RoHS : Compliant |
| 10,000 | |
| F0603HI4500V032TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 4.5 A, 32 VDC, 0603 [1608 Metric], SolidMatrix HI - Tape and Reel (Alt: F0603HI4500V032TM) RoHS : Not Compliant |
| 8,000 | ||
| T0603HI3000TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 3 A, 35 VDC, 0603 [1608 Metric], TF-Fuse HI - Tape and Reel (Alt: T0603HI3000TM) RoHS : Not Compliant |
| 8,000 | ||
| F0603HI3500V032TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 3.5 A, 32 VDC, 0603 [1608 Metric], SolidMatrix HI - Tape and Reel (Alt: F0603HI3500V032TM) RoHS : Not Compliant |
| 8,000 | ||
| F0603HI5000V032TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 5 A, 32 VDC, 0603 [1608 Metric], SolidMatrix HI - Tape and Reel (Alt: F0603HI5000V032TM) RoHS : Not Compliant |
| 8,000 | ||
| F0603HI3000V032TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 3 A, 32 VDC, 0603 [1608 Metric], SolidMatrix HI - Tape and Reel (Alt: F0603HI3000V032TM) RoHS : Not Compliant |
| 8,000 | ||
| AISC-0603HP-10NJ-T | Abracon Corporation | Wirewound Inductor, 10 nH, 60 Milliohm, ? 5%, 4.8 GHz, 1.35 A, 0603 [1608 Metric] - Tape and Reel (Alt: AISC-0603HP-10NJ-T) RoHS : Compliant |
| 6,000 | ||
| F0603HI1500V032TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 1.5 A, 32 VDC, 0603 [1608 Metric], SolidMatrix HI - Tape and Reel (Alt: F0603HI1500V032TM) RoHS : Not Compliant |
| 4,000 | ||
| 809A060-3H | Glenair Inc | - Bulk (Alt: 809A060-3H) RoHS : Compliant |
| 1 | ||
| TR-0603HV500-R | Eaton Corporation | SMD Fuse, Fast Acting, 500 mA, 63 VDC, 0603 [1608 Metric], 0603HV - Tape and Reel (Alt: TR-0603HV500-R) RoHS : Compliant |
| 0 | ||
| PNM0603H2001BBT1 | Vishay Intertechnologies | - Tape and Reel (Alt: PNM0603H2001BBT1) RoHS : Not Compliant |
| 0 | ||
| PTN0603H1001BBT1 | Vishay Intertechnologies | SMD Chip Resistor, 1 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0603H1001BBT1) RoHS : Not Compliant |
| 0 | ||
| PTN0603H1003BSTF | Vishay Intertechnologies | SMD Chip Resistor, 100 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0603H1003BSTF) RoHS : Compliant |
| 0 | ||
| PTN0603H1022BBWS | Vishay Intertechnologies | SMD Chip Resistor, 10.2 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PTN Series - Waffle Pack (Alt: PTN0603H1022BBWS) RoHS : Not Compliant |
| 0 | ||
| PTN0603H1043BBT5 | Vishay Intertechnologies | SMD Chip Resistor, 104 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0603H1043BBT5) RoHS : Not Compliant |
| 0 | ||
![]() Newark | T0603HI2500TM | AEM Inc | FUSE, HIGH INRUSH, 2.5A, 35VDC, 0603; RoHS : Compliant |
| 7,230 | |
| TR-0603HV500-R | Eaton Electronics | FUSE, FAST ACTING, 0.5A, 63VDC, 0603; RoHS : Compliant |
| 4,316 | ||
| TR-0603HV500-R | Eaton Electronics | FUSE, FAST ACTING, 0.5A, 63VDC, 0603; RoHS : Compliant |
| 4,316 | ||
| TR-0603HV500-R | Eaton Bussmann | FUSE, FAST ACTING, 0.5A, 63VDC, 0603; RoHS : Compliant |
| 1,665 | ||
| TR-0603HV500-R | Eaton Bussmann | FUSE, FAST ACTING, 0.5A, 63VDC, 0603; RoHS : Compliant |
| 1,665 | ||
| 0603HP-27NXGRW | Coilcraft Inc | WIREWOUND INDUCTOR, 27NH, 0.78A, 0603; RoHS : Compliant |
| 1,634 | ||
| 0603HP-27NXGRW | Coilcraft Inc | WIREWOUND INDUCTOR, 27NH, 0.78A, 0603; RoHS : Compliant |
| 1,634 | ||
| 0603HP-6N8XGRW | Coilcraft Inc | WIREWOUND INDUCTOR, 6.8NH, 1.4A, 0603; RoHS : Compliant |
| 1,430 | ||
| 0603HP-6N8XGRW | Coilcraft Inc | WIREWOUND INDUCTOR, 6.8NH, 1.4A, 0603; RoHS : Compliant |
| 1,430 | ||
| 0603HP-33NXJRW | Coilcraft Inc | WIREWOUND INDUCTOR, 33NH, 0.68A, 0603; RoHS : Compliant |
| 600 | ||
| 0603HP-33NXJRW | Coilcraft Inc | WIREWOUND INDUCTOR, 33NH, 0.68A, 0603; RoHS : Compliant |
| 600 | ||
| C0603H680J5GACT500 | KEMET Corporation | CAPACITOR, 68PF, C0G / NP0, 50V, 0603; RoHS : Compliant |
| 490 | ||
| C0603H680J5GACT500 | KEMET Corporation | CAPACITOR, 68PF, C0G / NP0, 50V, 0603; RoHS : Compliant |
| 490 | ||
| SF-0603HIA200M-2 | Bourns Inc | FUSE, AECQ200, HIGH INRUSH, 2A/32V, 0603; RoHS : Compliant |
| 32 | ||
| SF-0603HIA200M-2 | Bourns Inc | FUSE, AECQ200, HIGH INRUSH, 2A/32V, 0603; RoHS : Compliant |
| 32 | ||
![]() NXP Semiconductors | SFS2603HMBE6AD | NXP Semiconductors | S32K324 for BMS Application, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 500 | |
![]() RS | 03450603H | Littelfuse Inc | FUSEHOLDER, 3AG/AB, HIGH PROFILE, FINGERGRIP KNOB, 3/16" R/A SLDR/QC, 20A, 250V RoHS : Compliant |
| 4,286 | |
| 2454167 (25533603) (HFI803704501NA-025RS) | RS Pro | 3/8-24 X 4 1/2 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 1 | ||
| 603HR010 | Ohmite Mfg Co | RESISTORS, CURRENT SENSE, THROUGH HOLE 1/4WATT .01OHM 3% RoHS : Not Compliant |
| 0 | ||
| C042603-HD | Norgren | VALVE, 3-POS TOG 2W S/R HD 1/8 NPT (F), PNEUMADYNE |
| 0 | ||
| EJK-603-HEI | Norgren | SEAL KIT, 6.00 INCH BORE PISTON |
| 0 | ||
| BMXDDI1603H | Schneider Electric | H DIG 16 IN 48 VDC SINK |
| 0 | ||
| TR-0603HV500-R | Eaton Electronics | 0603 63V ROHS CHIP FUSE COMMERCIAL 0.5A |
| 0 | ||
| SF-0603HI100F-2 | Bourns Inc | 0603 HIGH-INRUSH PCB 1A RoHS : Compliant |
| 0 | ||
| SF-0603HI250F-2 | Bourns Inc | 0603 HIGH-INRUSH PCB 2.5A RoHS : Compliant |
| 0 | ||
| 6AV72603HB310BX1 | Siemens | SIMATIC IPC677D. 15" MULTITOUCH |
| 0 | ||
| SF-0603HIA200M-2 | Bourns Inc | 0603 HIGH-INRUSH MULTILAYER 2A AUTO RoHS : Compliant |
| 0 | ||
| SF-0603HIA300M-2 | Bourns Inc | 0603 HIGH-INRUSH MULTILAYER 3A AUTO RoHS : Compliant |
| 0 | ||
| CMCP 603H-32-01-01 | SKF | BEARING MAINTENANCE PRODUCT |
| 0 | ||
| ODP-2-56060-3H042-MN | Invertek Drives Ltd | AC DRIVE, FRAME 5, 65A, 60HP, 3 PHASE, IP20, TFT KEYPAD, NO FILTER, ODP-2 SERIES |
| 0 | ||
| 2435260-3 (HCP16DTD0L04) | TE Connectivity | SWITCH, PIN PLUNGER ACTUATOR, 16A, 125VAC, 250VDC, .187 TERM, LGT FORCE |
| 0 | ||
![]() Microchip Technology Inc | UES2603HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
![]() Rochester Electronics | LTM4603HVEV#PBF | Analog Devices Inc | DC/DC CONVERTER 1 OUT 600mV to 5V 6A 30W 118-LGA Tray RoHS : Compliant |
| 24 | |
| ACML-0603H-221-T | Abracon Corporation | FERRITE BEAD 1A 0603 T/R RoHS : Compliant |
| 8,000 | ||
![]() Sager | TSM-126-03-H-DV | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | ||
| TR-0603HV500-R | Eaton Bussmann | Surface Mount Fuses .5A 63V FAST ACTING |
| 0 | ||
| FW-16-03-H-D-295-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FTM-106-03-H-DV | Samtec Inc | Headers & Wire Housings 1.00 mm Surface Mount Micro Low Profile Terminal Strip RoHS : Compliant |
| 0 | ||
| MIT-076-03-H-D-TR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MW-16-03-H-D-123-187 | Samtec Inc | 1.00 MM FLEX STACK, FLEXIBLE MICRO BOARD STACKER, SURFACE MOUNT RoHS : Compliant |
| 0 | ||
| TW-06-03-H-D-255-150 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| YTQ-106-03-H-6 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TR-0603HV1-5-R | Eaton Bussmann | Surface Mount Fuses 1.5A 63V FAST ACTING |
| 0 | ||
| TST-136-03-H-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| SSW-136-03-H-T | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| EM352603HC | Eaton Bussmann | Pluggable Terminal Blocks 3P EM3526 Series HC |
| 0 | ||
| ESQT-126-03-H-5-375 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 8020.0603.H | Schurter Electronic Components | SUT-H 6.3X32, 12 A, 100 VDC, 250 VAC, TIME-LAG T, FUSE RoHS : Compliant |
| 0 | ||
| YTQ-116-03-H-Q | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() TME | ACML-0603H-121-T | Abracon Corporation | Ferrite: bead; Imp.@ 100MHz: 120Ω; SMD; 0603; Z: 120Ω; 100MHz RoHS : Compliant |
| 48,000 | |
AIML-0603HC-4R7M-T![]() | Abracon Corporation | Inductor: ferrite; SMD; 0603; 4.7uH; R: 500mΩ; ±20%; -55÷125°C RoHS : Compliant |
| 36,000 | ||
| AISC-0603HP-10NJ-T | Abracon Corporation | Inductor: wire; SMD; 0603; 10nH; ±5%; Core mat: ceramics; 1.8x1.12mm RoHS : Compliant |
| 18,000 | ||
| C0603H103J3GACT250 | YAGEO Corporation | Capacitor: ceramic; 10nF; 25VDC; C0G (NP0); SMD; 0603 |
| 4,250 | ||
| ACML-0603H-300-T | Abracon Corporation | Ferrite: bead; SMD; 0603; 3A; 100MHz; -55÷125°C RoHS : Compliant |
| 4,000 | ||
| C0603H103J3GAG | YAGEO Corporation | Capacitor: ceramic; 0.01uF; 25VDC; C0G (NP0) |
| 3,000 | ||
| AISC-0603HP-3N3B-T | Abracon Corporation | Inductor: wire; SMD; 0603; 3.3nH; 1.7A; 1.8x1.12mm; 35mΩ; -40÷125°C RoHS : Compliant |
| 2,695 | ||
| C0603H180J5GACT500 | YAGEO Corporation | Capacitor: ceramic; 18pF; 50VDC; C0G (NP0); ±5%; 1608 |
| 1,000 | ||
| C0603H100J5GACT500 | YAGEO Corporation | Capacitor: ceramic; 10pF; 50VDC; C0G (NP0); ±5%; 1608 |
| 500 | ||
| 710-10603 HELATAPE FLEX1000+ | HellermannTyton | Tape: electrical insulating; W: 19mm; L: 20m; Thk: 0.18mm; blue; 300% |
| 4 | ||
| EB2S 160/3HF 160A 3P | ETI Polam | Power breaker; Poles: 3; screw type; Inom: 160A; 690VAC; IP20; MCCB |
| 0 | ||
| MCT0603HC6049FP100 | Vishay Intertechnologies | Resistor: thin film; 60.4Ω; SMD; 0603; 0.1W; ±1%; MCT0603; H; 75V RoHS : Compliant |
| 0 | ||
| EB2S 160/3HF 16A 3P | ETI Polam | Power breaker; Poles: 3; screw type; Inom: 16A; 690VAC; IP20; MCCB |
| 0 | ||
| EB2S 160/3HF 20A 3P | ETI Polam | Power breaker; Poles: 3; screw type; Inom: 20A; 690VAC; IP20; MCCB |
| 0 | ||
| MCT0603HC4873FP100 | Vishay Intertechnologies | Resistor: thin film; 487kΩ; SMD; 0603; 0.1W; ±1%; MCT0603; H; 75V RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 0603HP68NXGLW | Coilcraft Inc | AVAILABLE EU | 1,125 | ||
| 0603HP91NXGL | Coilcraft Inc | AVAILABLE EU | 2,708 | |||
![]() ComSIT USA | BKP0603HS121T | TAIYO YUDEN | MULTILAYER CHIP BEAD INDUCTOR FOR POWER LINE Ferrite Chip, 0.85A RoHS : Compliant | 90,000 | ||
| ELM50603HDL | Bivar Inc | Optoelectronic Device RoHS : Compliant | 1,000 | |||
![]() Interstate Connecting Components | 809B060-3H | Glenair Inc | SHRINK BOOTS SHAPE MEMORY RoHS : Compliant |
| 26 | |
| 809SL060-3H | Glenair Inc | SHRINK BOOTS SHAPE MEMORY HAL SHRK BOOT RoHS : Compliant |
| 2 | ||
| 380AS001M1603H3 | Glenair Inc | SA- | 0 | |||
| 10-041636-03H | Amphenol Industrial Operations | PLUG | 0 | |||
| 2M809S060-3H | Amphenol Aerospace | 2M ACCESSORY | 0 | |||
| 380FS103M1603H3 | Glenair Inc | EMI BACKSHELL, SPIN COUPLING 38999 SIII, SZ16 | 0 | |||
| 809S060-3H | Glenair Inc | SHRINK BOOTS SHAPE MEMORY ACCESSORY RoHS : Compliant |
| 0 | ||
| 2M809A060-3H | Amphenol Aerospace | 2M SHRINK BOOT RIGHT ANGLE | 0 | |||
| 10-042636-03H | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| 809A060-3H | Glenair Inc | SHRINK BOOTS SHAPE MEMORY RoHS : Compliant |
| 0 | ||
![]() NexGen Digital | PTN0603H2002BST1 | Vishay Huntington | 8,000 | |||
| BK0603HS121-T | TAIYO YUDEN | RoHS : Compliant | 7,653 | |||
C0603HQN201-100JNE![]() | VENKEL LTD | RoHS : Compliant | 1,697 | |||
C0603H103J3GAC![]() | KEMET Corporation | RoHS : Compliant | 694 | |||
| 0603HC-18NXJLW | Coilcraft Inc | RoHS : Compliant | 365 | |||
| 0603HP-11NXGLW | Coilcraft Inc | RoHS : Compliant | 175 | |||
![]() Avnet Abacus | ACML-0603H-221-T | Abracon Corporation | - Tape and Reel (Alt: ACML-0603H-221-T) RoHS : Compliant | 48,000 | ||
| SF-0603HI050F-2 | Bourns Inc | - Tape and Reel (Alt: SF-0603HI050F-2) RoHS : Compliant | 8,000 | |||
| CA50C2603HLT | CTS Corporation | - Tape and Reel (Alt: CA50C2603HLT) RoHS : Compliant | 0 | |||
| CA70C2603HNT | CTS Corporation | - Tape and Reel (Alt: CA70C2603HNT) RoHS : Compliant | 0 | |||
| TR-0603HV500-R | Eaton Corporation | SMD Fuse Fast Acting 500 mA 63 VDC 0603 1608 Metric 0603HV - Tape and Reel (Alt: TR-0603HV500-R) RoHS : Compliant | 0 | |||
| SF-0603HI100F-2 | Bourns Inc | - Tape and Reel (Alt: SF-0603HI100F-2) RoHS : Compliant | 0 | |||
| CC0603HNPO040CTR | TDK Corporation | TDKCC0603HNPO040CTR (Alt: CC0603HNPO040CTR) RoHS : Compliant | 0 | |||
| CC0603HY5V224ZTR | TDK Corporation | TDKCC0603HY5V224ZTR (Alt: CC0603HY5V224ZTR) RoHS : Compliant | 0 | |||
| CC0603HNPO180JTR | TDK Corporation | TDKCC0603HNPO180JTR (Alt: CC0603HNPO180JTR) RoHS : Compliant | 0 | |||
| SF-0603HIA200M-2 | Bourns Inc | - Tape and Reel (Alt: SF-0603HIA200M-2) RoHS : Compliant | 0 | |||
| SF-0603HIA300M-2 | Bourns Inc | - Tape and Reel (Alt: SF-0603HIA300M-2) RoHS : Compliant | 0 | |||
| F0603HI2000V032TM | AEM Inc | SMD Fuse High Inrush Current Withstand 2 A 32 VDC 0603 1608 Metric SolidMatrix HI - Tape and Reel (Alt: F0603HI2000V032TM) RoHS : Compliant | 0 | |||
| MCT0603HC1002FP500 | Vishay Intertechnologies | MCT 060350 1 VG01 P5 10K - Tape and Reel (Alt: MCT0603HC1002FP500) RoHS : Compliant | 0 | |||
| MCT0603HC1211FP100 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT0603HC1211FP100) RoHS : Compliant | 0 | |||
| RN/0603-HIGH-LAB-KIT | TE Connectivity | (Alt: 1614758-4) RoHS : Compliant | 0 | |||
![]() Avnet Asia | F0603HI1000V032T | AEM Inc | (Alt: F0603HI1000V032T) RoHS : Compliant | 0 | ||
| TR-0603HV1-5-R | Eaton Corporation | (Alt: TR-0603HV1-5-R) RoHS : Compliant | 0 | |||
| PE-0603HFB601ST | Pulse Electronics Corporation | Ferrite Bead, 0603 [1608 Metric], 600 Ohm, 500 mA, 350 Milliohms, ? 25% (Alt: PE-0603HFB601ST) RoHS : Compliant | 0 | |||
| CPS8603HR-T0 | ConvenientPower | (Alt: CPS8603HR-T0) RoHS : Compliant | 0 | |||
| F0603HI5000V032T | AEM Inc | (Alt: F0603HI5000V032T) RoHS : Compliant | 0 | |||
| F0603HI7000V032T | AEM Inc | (Alt: F0603HI7000V032T) RoHS : Compliant | 0 | |||
C0603H222J1GAC7867![]() | KEMET Corporation | (Alt: C0603H222J1GAC7867) RoHS : Compliant | 0 | |||
| F0603HI3500V032T | AEM Inc | (Alt: F0603HI3500V032T) RoHS : Compliant | 0 | |||
| F0603HI2000V032T | AEM Inc | (Alt: F0603HI2000V032T) RoHS : Compliant |
| 0 | ||
| F0603HI4000V032T | AEM Inc | (Alt: F0603HI4000V032T) RoHS : Compliant | 0 | |||
| P-0603H1001BST0 | Vishay Intertechnologies | P-0603 50PPM 1K 0.1% S T0 e1 (Alt: P-0603H1001BST0) RoHS : Compliant | 0 | |||
| P0603H2003WNT | Vishay Intertechnologies | (Alt: P0603H2003WNT) RoHS : Compliant | 0 | |||
| F0603HI3000V032T | AEM Inc | (Alt: F0603HI3000V032T) RoHS : Not Compliant | 0 | |||
| ACML-0603H-601-T | Abracon Corporation | (Alt: ACML-0603H-601-T) RoHS : Compliant | 0 | |||
C0603H101J5GAC7867![]() | KEMET Corporation | KEMC0603H101J5GAC7867 MLCC 50V 100PF C0G (Alt: C0603H101J5GAC7867) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AISC-0603HP-5N1K-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-0603HP-8N7B-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-68NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R11G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R27J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ACML-0603H-121-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-6N8K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-8N7J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-30NK-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-9N5J-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R25K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-30NG-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R12K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R25G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-39NJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() EBV Elektronik | PFS2603HMBK9AD | NXP Semiconductors | SOT1571eFS26 12NC 935466770557 (Alt: PFS2603HMBK9AD) RoHS : Compliant | 0 | ||
| MFS2603HMBA0AD | NXP Semiconductors | EFS26 (Alt: MFS2603HMBA0AD) RoHS : Compliant | 0 | |||
| PFS2603HMBK9ADR2 | NXP Semiconductors | HLQFP48 eFS26 (Alt: PFS2603HMBK9ADR2) RoHS : Compliant | 0 | |||
![]() Master Electronics | SSW-116-03-H-S-RA-LL | Samtec Inc | RoHS : Compliant |
| 0 | |
| TW-06-03-H-D-295-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-06-03-H-D-305-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSM-126-03-H-DV | Samtec Inc | Conn Unshrouded Header HDR 52 POS 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| SF-0603HI100F-2 | Bourns Inc | 0603 SMD High-Inrush Thin-Film 1.0A RoHS : Compliant |
| 0 | ||
| TFM-106-03-H-S-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-06-03-H-D-210-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SSW-136-03-H-P-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SF-0603HIA200M-2 | Bourns Inc | SMD High-Inrush Fuse - 2A - 0603 - 32VDC - Automotive Grade - -55°C to 125°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| FTSH-106-03-H-DV-ES-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-16-03-H-D-295-100 | Samtec Inc | Conn Board Stacker HDR 32 POS 1.27mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| ESQT-116-03-H-Q-408 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SF-0603HIA300M-2 | Bourns Inc | SMD High-Inrush Fuse - 3A - 0603 - 32VDC - Automotive Grade - -55°C to 125°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| RN/0603-HIGH-LAB-KIT | TE Connectivity | RN 0603 10K2-332K LAB KIT Lab Kits Fixed Resistor MOQ Reduction RoHS : Compliant |
| 0 | ||
| MW-16-03-H-D-095-085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 8020.0603.H | Schurter Electronic Components | Cartridge Fuses SUT-H 6.3x32 Fuse T 12A RoHS : Compliant |
| 50 | |
| 03450603H | Littelfuse Inc | Fuse Holder; Shock-Safe; Finger Grip Knob; Front Mnt; Rt Angle Term.; for 3AG Fuses RoHS : Compliant |
| 50 | ||
| 8020.0603.H.PT | Schurter Electronic Components | Cartridge Fuses SUT-H 6.3x32 PT Fuse T 12A RoHS : Compliant |
| 50 | ||
| 603HG079184X | Switchcraft Conxall | Specialized Cables 2M Mini-XLR Cable 3P F Socket to Stip/Tin |
| 50 | ||
![]() Pasternack Enterprises US | PE3W04603/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Low Loss Cable Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W04603/HS low loss right angle SMA male to SMA female RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W04603/HS can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04603/HS RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W04603/HS SMA plug to SMA jack cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04603/HS can also be used in the other direction and will be an SMA female to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 1,135 | ||
| PE3W04603/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to SMA Female Low Loss Cable 36 Inch Length Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W04603/HS-36 low loss right angle SMA male to SMA female RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W04603/HS-36 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04603/HS-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W04603/HS-36 SMA plug to SMA jack cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04603/HS-36 can also be used in the other direction and will be an SMA female to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 227 | ||
| PE3W04603/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to SMA Female Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W04603/HS-60 low loss right angle SMA male to SMA female RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W04603/HS-60 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04603/HS-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W04603/HS-60 SMA plug to SMA jack cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04603/HS-60 can also be used in the other direction and will be an SMA female to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 227 | ||
| PE3W04603/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMA Female Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W04603/HS-12 low loss right angle SMA male to SMA female RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W04603/HS-12 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04603/HS-12 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W04603/HS-12 SMA plug to SMA jack cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04603/HS-12 can also be used in the other direction and will be an SMA female to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 227 | ||
| PE3W04603/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Female Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W04603/HS-24 low loss right angle SMA male to SMA female RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W04603/HS-24 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04603/HS-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W04603/HS-24 SMA plug to SMA jack cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04603/HS-24 can also be used in the other direction and will be an SMA female to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 227 | ||
| PE3W04603/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to SMA Female Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W04603/HS-48 low loss right angle SMA male to SMA female RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W04603/HS-48 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04603/HS-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W04603/HS-48 SMA plug to SMA jack cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04603/HS-48 can also be used in the other direction and will be an SMA female to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 227 | ||
| PE3W15603/HS | Pasternack Enterprises | 0 | ||||
| PE3C2603/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-600 Coax with Hea. PE3C2603/HS is a N male to N male cable using LMR-600 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2603/HS N male to N male cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C2603/HSBL | Pasternack Enterprises |
| 0 | |||
| PE3W08603/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using LMR-400-DB Coax with HeatShrink. PE3W08603/HS is a N male right angle to N male cable using LMR-400-DB coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08603/HS N male right angle to N male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C8603/HS | Pasternack Enterprises | 0 | ||||
| PE3C2603/HSGR | Pasternack Enterprises | 0 | ||||
| PE3W10603/HS2 | Pasternack Enterprises | 0 | ||||
| PE3C5603/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm MCX Jack to 75 Ohm F Female Bulkhead Cable Using 75 Ohm RG179 Coax with HeatShrink. PE3C5603/HS is a MCX jack to F female bulkhead cable using RG179 coax. This Pasternack MCX jack to F female bulkhead cable assembly uses a 75 Ohm MCX for connector 1 and a 75 Ohm F for connector 2. Our jack MCX to female F bulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3C5603/HS MCX jack to F female bulkhead cable assembly is constructed with RG179 coax. | 0 | |||
| PE3C1603/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. | 0 | |||
![]() Vyrian | PHT0603H2103FGW | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.0375W, 210000ohm, 75V, 1% +/-Tol, 55ppm/Cel, Surface Mount, 0603 RoHS : Compliant | 17,652 | ||
| BKP0603HM121-T | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 0.8A, 2 Pin(s) RoHS : Compliant | 17,357 | |||
| BK0603HR102-T | TAIYO YUDEN | Ferrite Chip, 1 Function(s), 0.22A, 2 Pin(s) RoHS : Compliant | 15,595 | |||
| BKP0603HM220-T | TAIYO YUDEN | Ferrite Chip, 1A RoHS : Compliant | 10,240 | |||
| LTM4603HVEV-PBF | Analog Devices Inc | 9,196 | ||||
| LTM4603HVIV-PBF | Analog Devices Inc | 7,776 | ||||
C0603H102F5GAC![]() | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 50V, 1% +Tol, 1% -Tol, C0G, 30ppm/Cel TC, 0.001uF, Surface Mount, 0603 RoHS : Compliant | 6,057 | |||
C0603H100J1GACTU![]() | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 100V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.00001uF, Surface Mount, 0603 RoHS : Compliant | 4,852 | |||
C0603H103F3GAC![]() | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 25V, 1% +Tol, 1% -Tol, C0G, 30ppm/Cel TC, 0.01uF, Surface Mount, 0603 RoHS : Compliant | 2,560 | |||
| C0603H472F5GACT500 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 50V, 1% +Tol, 1% -Tol, C0G, 30ppm/Cel TC, 0.0047uF, Surface Mount, 0603 | 1,078 | |||
| C0603H472F5GAE | KEMET Corporation | Ceramic Capacitor, Ceramic | 816 | |||
| ELM51603HDL | Bivar Inc | Optoelectronic Device RoHS : Compliant | 774 | |||
| 2M809S060-3H | Amphenol Corporation | Connector Accessory RoHS : Compliant | 510 | |||
| 0603HP-56NXJEW | Coilcraft Inc | General Purpose Inductor, 0.056uH, 5%, 1 Element, Ceramic-Core, SMD, 0603 RoHS : Compliant | 461 | |||
| C0603H103J3GAC | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.01uF, Surface Mount, 0603 | 196 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |