52HA3JB-T Price, nhà phân phối, Stock

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Female to TNC Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly TNC female to TNC male right angle low loss cable 12 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female to TNC male right angle low loss cable 12 inch length using LMR-240-UF coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to TNC cable is a female to male coax assembly, PE3W02152/HS-12, can also be known as a low loss TNC jack to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC plug cable assembly PE3W02152/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC female to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02152/HS-12 can also be used in the other direction and will be right angle TNC male to TNC female cable assembly if the opposite connectivity is required. Low loss TNC jack to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female to TNC male right angle low loss cable 12 inch length using LMR-240-UF coax with heatshrink.

1 : $131.99
25 : $125.39
50 : $118.79
100 : $113.51

995

PE3W22252/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to TNC Female Low Loss Cable 48 Inch Length Using LMR-400-DB Coax with HeatShrink., Pasternack’s PE3W22252/HS-48 low loss BNC male to TNC female RF cable assembly using LMR-400-DB coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to TNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a TNC cable connection on the other. Our BNC to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W22252/HS-48 can also be known as a low loss BNC plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W22252/HS-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our BNC male to TNC female cable has a maximum VSWR of 1.4:1. This PE3W22252/HS-48 BNC plug to TNC jack cable assembly is built with LMR-400-DB, which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W22252/HS-48 can also be used in the other direction and will be a TNC female to BNC male cable assembly if the opposite connectivity is required. This low loss BNC plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to TNC low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

1 : $64.15
25 : $60.94
50 : $57.74
100 : $55.17

395

PE3W16752/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Cable 24 Inch Length Using TCOM-240 Coax with HeatShrink., Pasternack’s PE3W16752/HS-24 SMA male to SMA male RF cable assembly using TCOM-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W16752/HS-24 can also be known as an SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.312-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16752/HS-24 RF cable has a PE jacket of 0.24-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W16752/HS-24 SMA plug to SMA plug cable assembly is built with TCOM-240, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $132.08
25 : $125.48
50 : $118.87
100 : $113.59

363

PE3852/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. HN Male to HN Male Cable Using RG58 Coax with HeatShrink. PE3852/HS is a HN male to HN male cable using RG58 coax. This Pasternack HN male to HN male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm HN for connector 2. Our male HN to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3852/HS HN male to HN male cable assembly is constructed with RG58 coax.

PE3W03452/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SMB Jack Cable Using LMR-100 Coax with HeatShrink. PE3W03452/HS is a MMCX plug right angle to SMB jack cable using LMR-100A coax. This Pasternack MMCX plug right angle to SMB jack cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMB for connector 2. MMCX right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to jack SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03452/HS MMCX plug right angle to SMB jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W18852/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Female Bulkhead Cable Using LMR-100 Coax with HeatShrink. PE3W18852/HS is a TNC female bulkhead to SMA female bulkhead cable using LMR-100A coax. This Pasternack TNC female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our female TNC bulkhead to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18852/HS TNC female bulkhead to SMA female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C7652/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SSMC Plug to Reverse Polarity TNC Female Bulkhead Cable Using RG188 Coax with HeatShrink., Radio frequency assembly SSMC plug to reverse polarity TNC female bulkhead cable using RG188 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to reverse polarity TNC female bulkhead cable using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and reverse polarity TNC bulkhead cable connection on the other. Our SSMC to reverse polarity TNC cable assemblies have a plug gender on end 1 and female on end 2. This SSMC to reverse polarity TNC cable is a plug to female coax assembly, PE3C7652/HS, can also be known as a SSMC male to reverse polarity TNC jack cable assembly and will be shipped same-day as it is purchased. SSMC male to reverse polarity TNC jack cable assembly PE3C7652/HS is built with RG188 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMC plug to reverse polarity TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7652/HS can also be used in the other direction and will be reverse polarity TNC female bulkhead to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to TNC reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to reverse polarity TNC female bulkhead cable using RG188 coax with heatshrink.

PE3W09252/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Reverse Polarity Push-On MCX Plug Right Angle Cable Using RG316 Coax with HeatShrink. PE3W09252/HS is a SMA male right angle to reverse polarity MCX plug right angle cable using RG316 coax. This Pasternack SMA male right angle to reverse polarity MCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. SMA right angle to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to reverse polarity plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09252/HS SMA male right angle to MCX reverse polarity plug right angle cable assembly is constructed with RG316 coax.

PE3W13752/HS

Pasternack Enterprises

PE3W22352/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to TNC Female Bulkhead Cable Using LMR-100 Coax with HeatShrink. PE3W22352/HS is a reverse polarity SMA male to TNC female bulkhead cable using LMR-100A coax. This Pasternack reverse polarity SMA male to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male SMA to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22352/HS SMA reverse polarity male to TNC female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3652/HS

Pasternack Enterprises

PE38752H-12

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. Violet FAKRA Plug to FAKRA Jack Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly violet FAKRA plug to FAKRA jack cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Violet FAKRA plug to FAKRA jack cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a plug to jack coax assembly, PE38752H-12, can also be known as a FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE38752H-12 is built with RG174 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38752H-12 can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this violet FAKRA plug to FAKRA jack cable 12 inch length using RG174 coax.

1 : $56.99
25 : $54.14
50 : $51.29
100 : $49.01

PE3C9952/HS

Pasternack Enterprises

PE3W00652/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Female Bulkhead Cable Us. PE3W00652/HS is a SMA male right angle to N female bulkhead cable using LMR-100A coax. This Pasternack SMA male right angle to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00652/HS SMA male right angle to N female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W24652/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female to SMA Male Cable Using LMR-195 Coax with HeatShrink. PE3W24652/HS is a reverse polarity TNC female to SMA male cable using LMR-195 coax. This Pasternack reverse polarity TNC female to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24652/HS TNC reverse polarity female to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

Vyrian

BZT52H-C6V2

Nexperia

Zener Diode, 6.2V V(Z), 6.45%, 0.375W, Silicon, Unidirectional
RoHS : Compliant

14,008

BZT52H-A62-QX

Nexperia

RoHS : Compliant

13,523

BZT52H-C24-QX

Nexperia

RoHS : Compliant

12,146

LTC6252HS6-TRMPBF

Analog Devices Inc

11,360

BZT52H-A8V2-QX

Nexperia

RoHS : Compliant

9,381

LTC2052HVCGN#PBF

Analog Devices Inc

Operational Amplifier, 4 Func, 3uV Offset-Max, CMOS, PDSO16
RoHS : Compliant

9,243

BZT52H-B39,135

Nexperia

Zener Diode, 39V V(Z), 2.05%, 0.375W, Silicon, Unidirectional

9,104

LT3652HVIMSE#TRPBF

Analog Devices Inc

Battery Charge Controller, 1 Channel, BIPolar, PDSO12
RoHS : Compliant

8,808

LTC2052HVCGN#TR

Analog Devices Inc

Operational Amplifier, 4 Func, 3uV Offset-Max, CMOS, PDSO16
RoHS : Not Compliant

8,655

LTC2852HMS#TRPBF

Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10
RoHS : Compliant

8,220

BZT52H-A8V2-Q

Nexperia

Zener Diode
RoHS : Compliant

7,678

BZT52H-A9V1

Nexperia

Zener Diode, 9.1V V(Z), 1%, 0.83W, Silicon, Unidirectional

6,850

LTC2052HVHGN

Analog Devices Inc

Operational Amplifier, 4 Func, 3uV Offset-Max, CMOS, PDSO16
RoHS : Not Compliant

6,449

BZT52H-C39

Nexperia

Zener Diode, 39V V(Z), 5.13%, 0.375W, Silicon, Unidirectional
RoHS : Compliant

4,887

M39006/25-0252H

Defense Logistics Agency

Tantalum Capacitor, Polarized, Tantalum (wet), 100V, 10% +Tol, 10% -Tol, 39uF, Through Hole Mount

652

Win Source Electronics

BZT52H-C10 (10V)

Nexperia

4,055 : $0.074
3,250 : $0.077
2,500 : $0.08
1,745 : $0.0861
1,125 : $0.0891
530 : $0.0951

240,320

BZT52H-C24

Nexperia

Single Zener diodes in a SOD123F package
RoHS : Compliant

8,045 : $0.0373
6,445 : $0.0388
4,955 : $0.0404
3,460 : $0.0434
2,230 : $0.0449
1,045 : $0.0479

225,000

BZT52H-B10

Nexperia

BZT52H-B10
RoHS : Compliant

2,705 : $0.111
2,165 : $0.1155
1,670 : $0.12
1,165 : $0.1291
750 : $0.1336
355 : $0.1426

180,000

BZT52H-C3V3

Nexperia

Single Zener diodes in a SOD123F package
RoHS : Compliant

20,275 : $0.0148
16,235 : $0.0154
12,500 : $0.016
8,675 : $0.0173
5,590 : $0.0179
2,620 : $0.0191

160,180

BZT52H-C4V7

Nexperia

Single Zener diodes in a SOD123F package
RoHS : Compliant

10,950 : $0.0274
8,170 : $0.0306
6,330 : $0.0316
4,590 : $0.0327
2,970 : $0.0337
1,220 : $0.0411

123,000

BZT52H-C5V1

Nexperia

Single Zener diodes in a SOD123F package
RoHS : Compliant

3,270 : $0.1028
2,620 : $0.1071
2,015 : $0.1112
1,405 : $0.1196
905 : $0.1238
425 : $0.132

120,000

BZT52H-C51

Nexperia

Single Zener diodes in a SOD123F package
RoHS : Compliant

15,080 : $0.0223
11,265 : $0.0249
8,735 : $0.0256
6,330 : $0.0265
4,085 : $0.0274
1,680 : $0.0334

120,000

BZT52H-B24

Nexperia

Single Zener diodes in a SOD123F package
RoHS : Compliant

3,270 : $0.1028
2,620 : $0.1071
2,015 : $0.1112
1,405 : $0.1196
905 : $0.1238
425 : $0.1322

103,761

BZT52H-B3V9

Nexperia

Single Zener diodes in a SOD123F package
RoHS : Compliant

1,280 : $0.2346
960 : $0.2617
740 : $0.2707
540 : $0.2797
350 : $0.2888
145 : $0.3519

60,000

BZT52H-B47

Nexperia

Single Zener diodes in a SOD123F package
RoHS : Compliant

3,620 : $0.0829
2,705 : $0.0925
2,090 : $0.0957
1,520 : $0.0989
980 : $0.1021
405 : $0.1244

60,000

BZT52HC8V2WF-7

Diodes Incorporated

DIODE ZENER 8.2V 375MW SOD123F / Zener Diode 8.2 V 375 mW ±6.1% Surface Mount SOD-123F
RoHS : Compliant

21,900 : $0.0137
16,340 : $0.0153
12,660 : $0.0158
9,150 : $0.0164
5,920 : $0.0169
2,430 : $0.0206

25,000

BZT52HC2V4WF-7

Diodes Incorporated

ZENER DIODE SOD123F T&R 3K
RoHS : Compliant

5,740 : $0.0523
4,290 : $0.0583
3,320 : $0.0603
2,410 : $0.0623
1,560 : $0.0643
640 : $0.0784

20,000

MP1652HGTF-Z

Monolithic Power Systems

895 : $0.3355
720 : $0.3491
555 : $0.3628
385 : $0.39
250 : $0.4037
120 : $0.431

13,000

LT3652HVEMSE#PBF

Linear Technology

IC BATTERY CHARGER 2A 12-MSOP / Switching Battery Charger Lead-Acid/Li-FePO4/Li-Ion/Li-Pol 2000mA 3.3V Automotive 12-Pin MSOP EP Tube
RoHS : Compliant

31 : $9.8485
23 : $10.9849
18 : $11.3637
13 : $11.7425
9 : $12.1213
4 : $14.7728

4,060

LTC4352HMS#TRPBF

Analog Devices Inc

IC OR CTRLR N+1 12MSOP / OR Controller N+1 ORing Controller N-Channel N:1 12-MSOP
RoHS : Compliant

24 : $12.8031
18 : $14.2804
14 : $14.7728
10 : $15.2652
7 : $15.7576
3 : $19.2046

650

52HA3JB-T nhà phân phối

Link URL