| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
521L-AB3-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | FT7521L6X | onsemi | - Tape and Reel (Alt: FT7521L6X) RoHS : Not Compliant |
| 0 | |
| XCVM2152-1LSINFVD1024 | AMD | XCVM2152-1LSINFVD1024 - Bulk (Alt: XCVM2152-1LSINFVD1024) RoHS : Compliant | 0 | |||
| MTSW-145-21-L-Q-200 | Samtec Inc | - Bulk (Alt: MTSW-145-21-L-Q-200) RoHS : Compliant | 0 | |||
| 521L25025DTR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 25MHz ?2.5ppm HCMOS 4-Pin CSMD T/R - Tape and Reel (Alt: 521L25025DTR) RoHS : Compliant |
| 0 | ||
| TSW-215-21-L-D | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 5.08 mm, 2 Rows, 30 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-215-21-L-D) RoHS : Compliant | 0 | |||
| 521L14725ITR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 14.7456MHz ?2.5ppm HCMOS 4-Pin CSMD T/R - Tape and Reel (Alt: 521L14725ITR) RoHS : Compliant |
| 0 | ||
| XAVE1752-1LLINSVG1369 | AMD | XAVE1752-1LLINSVG1369 - Bulk (Alt: XAVE1752-1LLINSVG1369) RoHS : Compliant |
| 0 | ||
| 10127819-20521LF | Amphenol Corporation | Connector Power Header 20 Position 4.2mm Solder Right Angle Through Hole 20 Terminal 1 Port Tray - Trays (Alt: 10127819-20521LF) RoHS : Not Compliant |
| 0 | ||
| TSW-115-21-L-S-RA | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 2.54 mm, 1 Rows, 15 Contacts, Through Hole, TSW Series - Bulk (Alt: TSW-115-21-L-S-RA) RoHS : Compliant | 0 | |||
| 10137867-0521LF | Amphenol Corporation | - Tape and Reel (Alt: 10137867-0521LF) RoHS : Not Compliant |
| 0 | ||
| XAVE1752-1LLQVSVA1596 | AMD | XAVE1752-1LLQVSVA1596 - Bulk (Alt: XAVE1752-1LLQVSVA1596) RoHS : Compliant |
| 0 | ||
| PLT0805Z1521LBTS | Vishay Intertechnologies | SMD Chip Resistor, 1.52 kohm, ? 0.01%, 250 mW, 0805 [2012 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT0805Z1521LBTS) RoHS : Not Compliant |
| 0 | ||
| 521L20025CTR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 20MHz ?2.5ppm HCMOS 4-Pin CSMD T/R - Tape and Reel (Alt: 521L20025CTR) RoHS : Compliant |
| 0 | ||
| 521L14425ITR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 14.4MHz ?2.5ppm HCMOS 4-Pin CSMD T/R - Tape and Reel (Alt: 521L14425ITR) RoHS : Compliant |
| 0 | ||
| 521L20025DTR | CTS Corporation | Temperature Compensated Crystal Oscillator (TCXO) 20MHz ?2.5ppm HCMOS 4-Pin CSMD T/R - Tape and Reel (Alt: 521L20025DTR) RoHS : Compliant |
| 0 | ||
![]() Newark | CTS521,L3F(T | Toshiba America Electronic Components | Schottky Diode, 30V, 0.2A, Sod-882; |Toshiba CTS521,L3F(T RoHS : Compliant |
| 5,743 | |
| CTS521,L3F(T | Toshiba America Electronic Components | Schottky Diode, 30V, 0.2A, Sod-882; |Toshiba CTS521,L3F(T RoHS : Compliant |
| 5,743 | ||
| 10155245-21LF | Amphenol Communications Solutions | Contact, Socket, 30-26Awg, Crimp; |Amphenol Communications Solutions 10155245-21LF RoHS : Compliant |
| 3,900 | ||
| MTSW-105-21-L-D-690 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 10Pos; |Samtec, Inc. MTSW-105-21-L-D-690 RoHS : Compliant |
| 888 | ||
| MTSW-105-21-L-T-1090 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 15Pos; |Samtec, Inc. MTSW-105-21-L-T-1090 RoHS : Compliant |
| 641 | ||
| TSW-105-21-L-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 5Way; |Samtec, Inc. TSW-105-21-L-S RoHS : Compliant |
| 538 | ||
| 10158517-00521LF | Amphenol Communications Solutions | Conn Housing, Rcpt, 5Pos, 1.5Mm; Product Range:Minitek Multipitch 10158517 Series; Gender:Receptacle; No. Of Positions:5Positions; Pitch Spacing:1.5Mm; For Use With:Amphenol Minitek Multipitch 10157551 Series Socket Contacts Rohs Compliant: Yes RoHS : Compliant |
| 500 | ||
| HTSW-105-21-L-D | Samtec Inc | Header, 2.54Mm, Vertical Tht, 10Way; |Samtec, Inc. HTSW-105-21-L-D RoHS : Compliant |
| 456 | ||
| HMTSW-105-21-L-D-1220 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 10Pos; |Samtec, Inc. HMTSW-105-21-L-D-1220 RoHS : Compliant |
| 333 | ||
| TMS-105-21-L-S | Samtec Inc | Pin Header, Tms-105-21-L-S; |Samtec, Inc. TMS-105-21-L-S RoHS : Compliant |
| 287 | ||
| MTSW-115-21-L-D-1240 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 30Pos; |Samtec, Inc. MTSW-115-21-L-D-1240 RoHS : Compliant |
| 283 | ||
| TMS-105-21-L-D | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 10Pos; |Samtec, Inc. TMS-105-21-L-D RoHS : Compliant |
| 266 | ||
| MTSW-125-21-L-T-340 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 75Pos; |Samtec, Inc. MTSW-125-21-L-T-340 RoHS : Compliant |
| 135 | ||
| TMS-125-21-L-D | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 50Pos; |Samtec, Inc. TMS-125-21-L-D RoHS : Compliant |
| 108 | ||
| XS2F-D521-LG0-A | OMRON Industrial Automation | Sensor I/O Connector; |Omron Industrial Automation XS2F-D521-LG0-A RoHS : Not Compliant |
| 1 | ||
![]() Analog Devices Inc | AD521LDZ![]() | Analog Devices Inc | PROGRAMMABLE GAIN IN AMP RoHS : Compliant |
| 0 | |
![]() RS | 4352-1L | MG Chemicals | THINNER 2,32 OZ (945ML),CLEAR, BLUSH RESISTANT, SELF LEVELING, GLOSS, PLASTIC SAFE |
| 3 | |
| FO-1252-1LW | Bimba Manufacturing Company | CYLINDER, FLAT-I, DBL ACT, SGL ROD, ; 4IN BORE ; STROKE: 2 INCH(S); PIVOT MOUN |
| 0 | ||
| PT65521L508 | APEM Inc | DIP ROTARY SWITCH P60 10MM RoHS : Compliant |
| 0 | ||
| 101366560521LF | Amphenol FCi | 10136656-0521LF-MINITEK PWR3.0 VT HEADER |
| 0 | ||
| 101366540521LF | Amphenol FCi | 10136654-0521LF-MINITEK PWR3.0 RA HEADER |
| 0 | ||
| ASD-B3A-1521-L | Delta Electronics Inc | B3A SERVO DRIVE, 1.5KW, 230V 1PH/3PH, STO, MODBUS, PULSE IN, ANALOG IN, PR MODE |
| 0 | ||
| E2 1PU2R521L41 | Pizzato Elettrica Srl | SPRING-RETURN YELLOW FLUSH PUSHBUTTON WITH MARKING |
| 0 | ||
| 1012781912521LF | Amphenol FCi | 10127819-12521LF-MTK 4.2 12P DR RA HDR SN |
| 0 | ||
| 1012781920521LF | Amphenol FCi | 10127819-20521LF-MTK 4.2 20P DR RA HDR SN |
| 0 | ||
| CC3-B0-26-615-21L-D | Carling Technologies | CIRCUIT BREAKER, C-SERIES, HYDRAULIC-MAGNETIC RoHS : Compliant |
| 0 | ||
| FDE322521LA34 (NULL) | Eaton Cutler-Hammer | FDE MCCB 35KAIC@480V 210+ ELECTR LSI 3P 40-100A 1A/1B AUX |
| 0 | ||
| XS2F-D521-LG0-A (XS2FD521LG0A) | OMRON Industrial Automation | SENSOR I/O CONNECTOR |
| 0 | ||
| XS2W-D521-LG1-A (XS2WD521LG1A) | OMRON Industrial Automation | SENSOR I/O CONNECTOR |
| 0 | ||
| TIGL52-1L-WH-FN (TGG-51027600|TIGL52-1L-WH-FN|TIGL521LWHFN) | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
| LT-2544-621-024 (GLT-00003521 | LT-2544-621-024 | LT2544621024) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
![]() Bisco Industries | C7521L6-29 | BOLTS | 2 | |||
![]() Rochester Electronics | MMBT6521LT1G![]() | onsemi | NPN Bipolar Small Signal Transistor RoHS : Compliant |
| 963,000 | |
| SMMBT6521LT1G | onsemi | NPN Bipolar Small Signal Transistor RoHS : Compliant |
| 615,000 | ||
AD521LD![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 1000uV Offset-Max, 2MHz Band Width, CDIP14 RoHS : Not Compliant |
| 6,540 | ||
AD521LDZ![]() | Analog Devices Inc | Op Amp Instrumentation 40MHz 14-DIP Tube RoHS : Compliant |
| 711 | ||
| PT6521L | Texas Instruments | Switching Regulator, Voltage-mode, 8A, 400kHz Switching Freq-Max, Hybrid RoHS : Compliant |
| 4 | ||
AD7521LN![]() | Intersil Corporation | Multiplying D/A Converters, 12-Bit, PDIP18 RoHS : Not Compliant |
| 364 | ||
| KED521LT3 | Kyoto Semiconductor Co Ltd | KED521LT3 - Plastic Mold Visible LEDs RoHS : Compliant |
| 1,232 | ||
MX7521LCWN![]() | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.5us Settling Time, PDSO18 RoHS : Not Compliant |
| 68 | ||
| MC521L | Motorola Mobility LLC | R-S Flip-Flop, 1-Func, TTL, CDIP14 RoHS : Not Compliant |
| 305 | ||
| MC521LB2 | Motorola Mobility LLC | MC521LB2 - R-S Flip-Flop, 1-Func, TTL, CDIP14 RoHS : Not Compliant |
| 1,745 | ||
![]() Sager | MTSW-115-21-L-D-1240 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 283 | |
| TFM-105-21-LM-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-145-21-L-Q-200 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TIHM52-1L-WH-FN-XVA1 | Carling Technologies | Rocker Switches | 0 | |||
| TSW-215-21-L-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-115-21-L-S-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| SSQ-105-21-L-D-009 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-125-21-L-T-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-125-21-L-D-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-135-21-L-T-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TFM-135-21-LM-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TFC-105-21-L-D-A | Samtec Inc | Headers & Wire Housings Tiger Eye Cost-Effective Terminal Strip, .050 Pitch RoHS : Compliant |
| 0 | ||
| CC3-B0-26-615-21L-D | Carling Technologies | Circuit Breakers CC3B02661521LD RoHS : Compliant | 0 | |||
| HTSW-205-21-L-S-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-145-21-L-Q-740 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() TME | 10155245-21LF | Amphenol Corporation | Connector: wire-board; socket; straight; SMT; tinned; 30AWG÷26AWG |
| 450,000 | |
| CTS521,L3F(B | Toshiba America Electronic Components | Diode: Schottky switching RoHS : Compliant |
| 8,479 | ||
| 10158517-00521LF | Amphenol Corporation | Connector: wire-board; female; Urated: 50V; PIN: 5; straight; 1.5mm |
| 3,000 | ||
| 521 LL90 | Pneumatic Components Limited (PCL) | Mechanical valve; -0.9÷10bar; 5/2 bistable; Thread: G 1/8" |
| 3 | ||
| BM2521L | BM Group spa | Cable gland; PG21; IP68; brass |
| 0 | ||
| XS2W-D521-LG1-A | OMRON Corporation | Cable: for sensors; PIN: 5; 20m; XS2W; IP67; automatics |
| 0 | ||
| MMDT521LW | Diotec Semiconductor AG | Transistor: NPN; bipolar; BRT; 50V; 0.1A; 200mW; SOT323; R1: 4.7kΩ RoHS : Compliant |
| 0 | ||
| FDMC89521L | onsemi | Transistor: N-MOSFET x2; unipolar; 60V; 8.2A; Idm: 40A; 16W; Power33 RoHS : Compliant |
| 0 | ||
MMBT6521LT1G![]() | onsemi | Transistor: NPN; bipolar; 25V; 0.1A; 0.225W; SOT23,TO236AB RoHS : Compliant |
| 0 | ||
BAS521LP-7![]() | Diodes Incorporated | Diode: switching; SMD; 325V; 0.4A; 50ns; X1-DFN1006-2; Ufmax: 1.1V RoHS : Compliant |
| 0 | ||
| SMMBT6521LT1G | onsemi | Transistor: NPN; bipolar; 25V; 0.1A; 0.225W; SOT23,TO236AB RoHS : Compliant |
| 0 | ||
PPM-2-5521L-S![]() | Same Sky | Connector: DC supply; plug; 7A; 20V; PIN: 2; vertical; soldering RoHS : Compliant |
| 0 | ||
| XS2F-D521-LG0-A | OMRON Corporation | Cable: for sensors; PIN: 5; M12 female straight; 20m; 250VDC; 4A |
| 0 | ||
| MMDT521LW-AQ | Diotec Semiconductor AG | Transistor: NPN; bipolar; BRT; 50V; 0.1A; 200mW; SOT323; R1: 4.7kΩ RoHS : Compliant |
| 0 | ||
| RE521-LF | Roth Elecronik GmbH | Board: universal; single sided,prototyping; W: 100mm; L: 160mm |
| 0 | ||
![]() ComSIT USA | LST3521LDA5 | Hewlett Packard Co | Laser Diode, 1336nm RoHS : Not Compliant | 20 | ||
![]() Interstate Connecting Components | 10127819-20521LF | Amphenol FCi | 10127819-20521LF-MTK 4.2 20P D RoHS : Unknown | 0 | ||
| 10137867-0521LF | Amphenol FCi | 10137867-0521LF-MINITEK PWR3.0 RoHS : Compliant | 0 | |||
| 10154457-0521LF | Amphenol FCi | FITMATE 1.20MM, LOW PROF-ILE, | 0 | |||
| 10127819-06521LF | Amphenol FCi | 10127819-06521LF-MTK 4.2 06P D RoHS : Unknown | 0 | |||
| 10127819-10521LF | Amphenol FCi | 10127819-10521LF-MTK 4.2 10P D RoHS : Unknown | 0 | |||
| 10127819-14521LF | Amphenol FCi | 10127819-14521LF-MTK 4.2 14P D RoHS : Unknown | 0 | |||
| 10127819-24521LF | Amphenol FCi | 10127819-24521LF-MTK 4.2 24P D RoHS : Unknown | 0 | |||
| 10179107-10521LF | Amphenol FCi | FITMATE 1.00MM, LOW PROF-ILE, | 0 | |||
| 66925-521LF | Amphenol FCi | RoHS : Compliant |
| 0 | ||
| 91901-31521LF | Amphenol FCi | CONAN PLUG RoHS : Compliant |
| 0 | ||
| 10127819-22521LF | Amphenol FCi | 10127819-22521LF-MTK 4.2 22P D RoHS : Unknown | 0 | |||
| 10136644-0521LF | Amphenol FCi | 10136644-0521LF-MINITEK PWR4.2 RoHS : Compliant | 0 | |||
| 91911-31521LF | Amphenol FCi | CONAN HEADER RoHS : Compliant |
| 0 | ||
| 10155245-21LF | Amphenol FCi | 10155245-21LF-1.25 MM TERMINAL CRIMP CONTACT |
| 0 | ||
| 10136654-0521LF | Amphenol FCi | 10136654-0521LF-MINITEK PWR3.0 RoHS : Compliant | 0 | |||
![]() Powell Electronics | 10158517-00521LF | Amphenol FCi | Cable Assembly |
| 1,980 | |
| MTSW-105-21-L-D-690 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 586 | ||
| MTSW-105-21-L-T-1090 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 423 | ||
| MTSW-105-21-L-T-340 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 423 | ||
| TSW-105-21-L-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 355 | ||
| HTSW-105-21-L-D | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 301 | ||
| HMTSW-105-21-L-D-1220 | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 220 | ||
| TMS-105-21-L-S | Samtec Inc | Tiger Buy Socket Strip with PCB Tails, 0 RoHS : Compliant |
| 189 | ||
| MTSW-115-21-L-D-1240 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 187 | ||
| TMS-105-21-L-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 176 | ||
| HTMS-105-21-L-D | Samtec Inc | PCB Header, High-Profile, Through-Hole, RoHS : Compliant |
| 171 | ||
| HMTSW-115-21-L-D-866 | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 123 | ||
| TSW-125-21-L-D | Samtec Inc | .100 Terminal Strip RoHS : Compliant |
| 106 | ||
| MTSW-125-21-L-T-340 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 89 | ||
| TMS-125-21-L-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 71 | ||
![]() Richardson RFPD | MAAT-010521-L1TR05 | MACOM | Variable Attenuator 37dB 16000MHz 16-Pin PQFN EP T RoHS : Compliant |
| 900 | |
| MAAT-010521-L2TR05 | MACOM | Voltage Variable Attenuator 37dB 12000MHz RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | HMC521LC4E | Analog Devices Inc | INSTOCK | 1,495 | ||
![]() Avnet Abacus | 10155245-21LF | Amphenol Corporation | (Alt: 10155245-21LF) RoHS : Compliant | 450,000 | ||
| 3521-LABKIT | TE Connectivity | (Alt: 1-1625873-6) RoHS : Compliant | 0 | |||
| 91901-31521LF | Amphenol Corporation | - Tape and Reel (Alt: 91901-31521LF) RoHS : Compliant | 0 | |||
| 91911-31521LF | Amphenol Corporation | Conn Board to Board HDR 21 POS 1mm Solder ST SMD TR - Tape and Reel (Alt: 91911-31521LF) RoHS : Compliant | 0 | |||
| 10155245-21LF | Amphenol Corporation | (Alt: 10155245-21LF) RoHS : Compliant | 0 | |||
| 91910-21521LF | Amphenol Corporation | Conn Board to Board HDR 21 POS 1mm Solder ST SMD Tube (Alt: 91910-21521LF) RoHS : Compliant | 0 | |||
| TFC-105-21-L-D | Samtec Inc | (Alt: TFC-105-21-L-D) RoHS : Compliant | 0 | |||
| TSW-105-21-L-D | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 254 mm 2 Rows 10 Contacts Through Hole TSW Series (Alt: TSW-105-21-L-D) RoHS : Compliant | 0 | |||
| 10136644-0521LF | Amphenol Corporation | (Alt: 10136644-0521LF) RoHS : Compliant | 0 | |||
| 10136654-0521LF | Amphenol Corporation | (Alt: 10136654-0521LF) RoHS : Compliant | 0 | |||
| TFM-135-21-L-D-A | Samtec Inc | Conn Shrouded Header HDR 70 POS 127mm Solder ST ThruHole Tube (Alt: TFM-135-21-L-D-A) RoHS : Compliant | 0 | |||
| TFM-115-21-L-D-A | Samtec Inc | Conn Shrouded Header HDR 30 POS 127mm Solder ST ThruHole (Alt: TFM-115-21-L-D-A) RoHS : Compliant | 0 | |||
| 10158517-00521LF | Amphenol Corporation | Connector Housing Wire to Board Receptacle 5 Position 15mm Crimp Straight Cable Mount (Alt: 10158517-00521LF) RoHS : Compliant | 0 | |||
| TFM-105-21-L-D-A | Samtec Inc | Conn Shrouded Header HDR 10 POS 127mm Solder ST ThruHole (Alt: TFM-105-21-L-D-A) RoHS : Compliant | 0 | |||
| MTSW-115-21-L-D-1240 | Samtec Inc | Pin Header BoardtoBoard 254 mm 2 Rows 30 Contacts Through Hole MTSW Series (Alt: MTSW-115-21-L-D-1240) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 10155245-21LF | Amphenol Corporation | (Alt: 10155245-21LF) RoHS : Compliant |
| 750,000 | |
| FDMC89521L | onsemi | (Alt: FDMC89521L) RoHS : Compliant | 0 | |||
| 10162876-1SF521LF | Amphenol Corporation | FCI10162876-1SF521LF G68HD,BARKLIP BK150 (Alt: 10162876-1SF521LF) RoHS : Compliant | 0 | |||
| CTS521,L3F(T | Toshiba America Electronic Components | Diode Schottky 30V 0.2A 2-Pin MO-236-EA (Alt: CTS521,L3F(T) RoHS : Compliant | 0 | |||
| DHVSD521LP-7B | Diodes Incorporated | Small Signal Switching Diode, Single, 325 V, 400 mA, 1.1 V, 50 ns, 8 A, X1-DFN1006, 2 Pins (Alt: DHVSD521LP-7B) RoHS : Compliant | 0 | |||
| 10129500-1GA1521LF | Amphenol Corporation | (Alt: 10129500-1GA1521LF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FT7521L6X | onsemi | Timer IC Reset 1 18 V to 5 V 6 Pins MicroPak (Alt: FT7521L6X) RoHS : Compliant | 0 | ||
| FDMC89521L | onsemi | Dual NChannel PowerTrench MOSFET 60V 82A 17mO (Alt: FDMC89521L) RoHS : Compliant | 0 | |||
MMBT6521LT1G![]() | onsemi | NPN Bipolar Small Signal Transistor ONSSPCTRNSTVU6M5P (Alt: MMBT6521LT1G) RoHS : Compliant | 0 | |||
| DHVSD521LP-7B | Diodes Incorporated | Small Signal Switching Diode Single 325 V 400 mA 11 V 50 ns 8 A X1DFN1006 2 Pins - Tape and Reel (Alt: DHVSD521LP-7B) RoHS : Compliant | 0 | |||
| C17521_LISA4-RS | LEDIL | Lens for XPE2XPG2XPG3LUXEON TXNCSxE17A LEDs 16 Spot Beam PMMA Clear (Alt: C17521_LISA4-RS) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | 45-21/LK2C-B50634C8CB2/2T | Everlight Electronics Co Ltd | Low Power LEDs SSL Solid State Lighting (Alt: S10C003244) RoHS : Compliant | 16,000 | ||
| FDMC89521L | onsemi | Dual NChannel PowerTrench MOSFET 60V 82A 17mO (Alt: FDMC89521L) RoHS : Compliant | 0 | |||
MMBT6521LT1G![]() | onsemi | NPN Bipolar Small Signal Transistor ONSSPCTRNSTVU6M5P (Alt: MMBT6521LT1G) RoHS : Compliant | 0 | |||
| CES521,L3F(T | Toshiba America Electronic Components | Diode Small Signal Schottky 200mA 2Pin SOD523 Emboss TR (Alt: CES521,L3F(T) RoHS : Compliant | 0 | |||
| CTS521,L3F(T | Toshiba America Electronic Components | Diode Schottky 30V 02A 2Pin MO236EA (Alt: CTS521,L3F(T) RoHS : Compliant | 0 | |||
| C17521_LISA4-RS | LEDIL | Lens for XPE2XPG2XPG3LUXEON TXNCSxE17A LEDs 16 Spot Beam PMMA Clear (Alt: C17521_LISA4-RS) RoHS : Compliant | 0 | |||
![]() FDH Electronics | LS-9521L | TE Connectivity | Relays RoHS : Not Compliant | 0 | ||
![]() Flip Electronics | SMMBT6521LT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 225,000 | |
| FT7521L6X | onsemi | Stock, Ship Today RoHS : Compliant |
| 10,000 | ||
![]() Master Electronics | TFM-105-21-LM-D | Samtec Inc | RoHS : Compliant |
| 0 | |
| MTSW-105-21-L-S-1205 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-115-21-L-S-1165 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-145-21-L-Q-200 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-125-21-L-S-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-215-21-L-D | Samtec Inc | Pin Header Board-to-Board 5.08 mm 2 Rows 30 Contacts Through Hole TSW Series RoHS : Compliant |
| 0 | ||
| TSW-225-21-L-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-105-21-L-S-1075 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-105-21-L-S-1200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-115-21-L-S-1115 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-115-21-L-S-1160 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-125-21-L-S-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-105-21-L-S-1220 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-115-21-L-S-1135 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-115-21-L-S-1180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | PT65521L508 | APEM Inc | Coded Rotary Switches 4POS R/A .2in SWITCH ROTARY DIP RoHS : Compliant |
| 12 | |
| 4352-1L | MG Chemicals | Thinner 2,32 oz (945mL),Clear,Blush Resistant,Self Leveling,Gloss,Plastic Safe |
| 3 | ||
![]() Pasternack Enterprises US | PE3521LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Female to SMA Female Cable 6 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly SMA female to SMA female cable 6 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA female cable 6 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3521LF-6, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3521LF-6 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable 6 inch length using RG401 coax, RoHS. |
| 43 | |
| PE3521LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Female to SMA Female Cable 24 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly SMA female to SMA female cable 24 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA female cable 24 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3521LF-24, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3521LF-24 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable 24 inch length using RG401 coax, RoHS. |
| 43 | ||
| PE3521LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Female to SMA Female Cable 36 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly SMA female to SMA female cable 36 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA female cable 36 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3521LF-36, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3521LF-36 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable 36 inch length using RG401 coax, RoHS. |
| 43 | ||
| PE3521LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female to SMA Female Cable 60 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly SMA female to SMA female cable 60 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA female cable 60 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3521LF-60, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3521LF-60 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable 60 inch length using RG401 coax, RoHS. |
| 39 | ||
| PE37521LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. | 0 | |||
| PE3W16521LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to Reverse Polarity TNC Male Cable Using LMR-195-FR Coax, LF Solder. PE3W16521LF is a TNC female bulkhead to reverse polarity TNC male cable using LMR-195-FR coax. This Pasternack TNC female bulkhead to reverse polarity TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC bulkhead to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16521LF TNC female bulkhead to TNC reverse polarity male cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE33521LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to BNC Male Cable 24 Inch Length Using RG393 Coax, RoHS., Radio frequency assembly SMA male to BNC male cable 24 inch length using RG393 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to BNC male cable 24 inch length using RG393 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE33521LF-24, can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE33521LF-24 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33521LF-24 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 24 inch length using RG393 coax, RoHS. |
| 0 | ||
| PE36521LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 24 inches. 1.85mm Male to 1.85mm Male Cable 24 Inch Length Using PE-SR047FL Coax, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 24 inch length using PE-SR047FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 24 inch length using PE-SR047FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36521LF-24, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36521LF-24 is built with PE-SR047FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 24 inch length using PE-SR047FL coax, RoHS. |
| 0 | ||
| PE33521LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50. SMA Male to BNC Male Cable Using RG393 Coax, RoHS. PE33521LF is a SMA male to BNC male cable using RG393 coax. This Pasternack SMA male to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33521LF SMA male to BNC male cable assembly is constructed with RG393 coax. | 0 | |||
| PE33521LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to BNC Male Cable 36 Inch Length Using RG393 Coax, RoHS., Radio frequency assembly SMA male to BNC male cable 36 inch length using RG393 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to BNC male cable 36 inch length using RG393 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE33521LF-36, can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE33521LF-36 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33521LF-36 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 36 inch length using RG393 coax, RoHS. |
| 0 | ||
| PE36521LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 48 inches. 1.85mm Male to 1.85mm Male Cable 48 Inch Length Using PE-SR047FL Coax, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 48 inch length using PE-SR047FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 48 inch length using PE-SR047FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36521LF-48, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36521LF-48 is built with PE-SR047FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 48 inch length using PE-SR047FL coax, RoHS. |
| 0 | ||
| PE36521LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 6 inches. 1.85mm Male to 1.85mm Male Cable 6 Inch Length Using PE-SR047FL Coax, RoHS., Radio frequency assembly 1.85mm male to 1.85mm male cable 6 inch length using PE-SR047FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 1.85mm male to 1.85mm male cable 6 inch length using PE-SR047FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE36521LF-6, can also be known as a 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE36521LF-6 is built with PE-SR047FL which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male cable 6 inch length using PE-SR047FL coax, RoHS. |
| 0 | ||
| PE3C1521LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to BNC Male Right Angle Cable Using RG316-DS Coax with HeatShrink, LF Solder. PE3C1521LF/HS is a SMB plug right angle to BNC male right angle cable using RG316-DS coax. This Pasternack SMB plug right angle to BNC male right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm BNC for connector 2. SMB right angle to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1521LF/HS SMB plug right angle to BNC male right angle cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE33521LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to BNC Male Cable 60 Inch Length Using RG393 Coax, RoHS., Radio frequency assembly SMA male to BNC male cable 60 inch length using RG393 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to BNC male cable 60 inch length using RG393 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE33521LF-60, can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE33521LF-60 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33521LF-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 60 inch length using RG393 coax, RoHS. |
| 0 | ||
| PE33521LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male to BNC Male Cable 72 Inch Length Using RG393 Coax, RoHS., Radio frequency assembly SMA male to BNC male cable 72 inch length using RG393 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to BNC male cable 72 inch length using RG393 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE33521LF-72, can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE33521LF-72 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33521LF-72 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 72 inch length using RG393 coax, RoHS. |
| 0 | ||
![]() Teledyne HiRel | 54F521LMQB | Teledyne HiRel | IDENTITY COMPARATOR, 8-BIT | 0 | ||
![]() Vyrian | MX7521LCWN+T | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.5us Settling Time, PDSO18 RoHS : Compliant | 12,195 | ||
| MX7521LD | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.5us Settling Time, CDIP18 RoHS : Not Compliant | 11,240 | |||
AD521LD![]() | Analog Devices Inc | Instrumentation Amplifier, 1 Func, 1000uV Offset-Max, 2MHz Band Width, CDIP14 RoHS : Not Compliant | 10,450 | |||
| AD7521LQ | Analog Devices Inc | 9,812 | ||||
| MX7521LQ | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.5us Settling Time, CDIP18 RoHS : Not Compliant | 8,860 | |||
| XCVP1552-1LSIVSVA2785 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA2785 RoHS : Compliant | 3,150 | |||
| XCVP1052-1LSIVSVC2021 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA2021 RoHS : Compliant | 3,094 | |||
| XCVC1352-1LSENSVE1369 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1369 RoHS : Compliant | 2,982 | |||
| XCVE1752-1LSEVSVA2197 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA2197 RoHS : Compliant | 2,740 | |||
| XCVE1752-1LSINSVG1369 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1369 RoHS : Compliant | 2,678 | |||
| XCVP1052-1LLIVSVC2021 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA2021 RoHS : Compliant | 2,556 | |||
| XCVC1352-1LSENBVA1024 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA1024 RoHS : Compliant | 2,463 | |||
| XCVP1552-1LSEVSVA3340 | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA3340 RoHS : Compliant | 2,050 | |||
| XCVC1352-1LLIVSVE1369 | AMD Xilinx | Microprocessor RoHS : Compliant | 1,201 | |||
| HMC521LC4TR | Hittite Microwave | Image Rejection Mixer, GAAS | 381 | |||
![]() Win Source Electronics | BAS521LP-7![]() | Diodes Incorporated | DIODE GEN PURP 325V 400MA 2DFN RoHS : Compliant |
| 90,000 | |
| FDMC89521L | Fairchild Semiconductor Corporation | MOSFET 2N-CH 60V 8.2A POWER33 RoHS : Compliant |
| 18,000 | ||
BAS521LP-7B![]() | Diodes Incorporated | DIODE GEN PURP 325V 400MA 2DFN RoHS : Compliant |
| 15,674 | ||
| HMC521LC4 | Analog Devices Inc | IC MMIC IQ MIXER 24SMD RoHS : Compliant |
| 2,400 | ||
| HMC521LC4TR | Analog Devices Inc | Up/Down Conv Mixer 13.5GHz 24-Pin CQFN EP T/R | IC MMIC IQ MIXER 24SMD RoHS : Compliant |
| 2,200 | ||
DS26521LN+![]() | Maxim Integrated Products | IC TELECOM INTERFACE 64LQFP / Telecom IC Transceiver 64-LQFP (10x10) RoHS : Compliant |
| 1,463 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |