| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
50SPX4-48D8-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() TME | 4C.02.9.024.0050SPA | FINDER SpA | Relay: interface; Ucoil: 24VDC; DPDT; 15A; 8A/250VAC; 8A/24VDC; IP20 |
| 344 | |
| 14150/SP | Bulgin | 14150/SP |
| 100 | ||
| C13085_MIRELLA-50-S-PF | LEDIL | Spotlight; LEDs; 50mm |
| 70 | ||
| 50SP60-01-1-06N | Grayhill Inc | Switch: rotary; Pos: 6; on panel,THT; Rcont max: 10mΩ; 50; -40÷85°C RoHS : Compliant |
| 5 | ||
| 48.52.7.024.5050SPA | FINDER SpA | Relay: interface; Ucoil: 24VDC; DPDT; 15A; 8A/250VAC; 8A/24VDC; IP20 |
| 0 | ||
| 4C.02.9.110.0050SPA | FINDER SpA | Relay: interface; Ucoil: 110VDC; DPDT; 8A/250VAC; 8A/24VDC; 4C.02 |
| 0 | ||
| 48.62.7.012.0050SPA | FINDER SpA | Relay: interface; Ucoil: 12VDC; DPDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
| 48.81.7.024.0050SPA | FINDER SpA | Relay: interface; Ucoil: 24VDC; Uswitch: max.220VDC; 48.81; IP20 |
| 0 | ||
| 58.P3.9.024.0050SPA | FINDER SpA | Relay: interface; Ucoil: 24VDC; 3PDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
CMS-4052-0550SP![]() | Same Sky | Loudspeaker; miniature; 500mW; 50Ω; Ø40x5.2mm; 3.6kHz; Ø: 40mm; PEN RoHS : Compliant |
| 0 | ||
| SL16SMD24750SP | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 50; SMT; 3A; 250V |
| 0 | ||
| 48.31.7.012.0050SPA | FINDER SpA | Relay: interface; Ucoil: 12VDC; SPDT; 20A; 10A/250VAC; 10A/24VDC |
| 0 | ||
CMS-3648-150SP![]() | Same Sky | Loudspeaker; miniature; 1W; 50Ω; Ø36x4.8mm; 6kHz; Sound level: 89dB RoHS : Compliant |
| 0 | ||
| AP7375Q-50SP-13 | Diodes Incorporated | IC: voltage regulator; LDO,linear,fixed; 5V; 0.35A; SO8-EP; SMD RoHS : Compliant |
| 0 | ||
| ATUM-4.5/1.5-0-SP | TE Connectivity | Heat shrink sleeve; glued; 3: 1; 4.5mm; black; polyolefine; reel |
| 0 | ||
![]() Avnet Americas | DDMME50SP | ITT Interconnect Solutions | - Bulk (Alt: DDMME50SP) RoHS : Not Compliant | 1 | ||
| GPO-135-19/9.5-0-SP | TE Connectivity | - Tape and Reel (Alt: 1807774001) RoHS : Not Compliant |
| 0 | ||
| ZHTM-3/1.5-0-SP | TE Connectivity | - Cable Rools/Shrink Tubing (Alt: 2411034003) RoHS : Compliant |
| 0 | ||
| DDNGL-50S-P1 | ITT Interconnect Solutions | - Bulk (Alt: DDNGL-50S-P1) RoHS : Not Compliant |
| 0 | ||
| 50SP45-01-1-05N | Grayhill Inc | - Bulk (Alt: 50SP45-01-1-05N) RoHS : Compliant |
| 0 | ||
| 50SPT36-01B04N | Grayhill Inc | - Bulk (Alt: 50SPT36-01B04N) RoHS : Compliant |
| 0 | ||
| C28S-06.50-SPS8-BJT8 | Samtec Inc | Circular RF Shielded Twisted Pair Twinax Cabl - Bulk (Alt: C28S-06.50-SPS8-BJT8) RoHS : Compliant | 0 | |||
| 50SP36-01-1-03N | Grayhill Inc | - Bulk (Alt: 50SP36-01-1-03N) RoHS : Compliant |
| 0 | ||
| C28S-05.50-SPS8-RPS8 | Samtec Inc | Circular RF Shielded Twisted Pair Twinax Cabl - Bulk (Alt: C28S-05.50-SPS8-RPS8) RoHS : Compliant | 0 | |||
| C28S-17.50-SPS8-SPS8 | Samtec Inc | - Bulk (Alt: C28S-17.50-SPS8-SPS8) RoHS : Compliant | 0 | |||
| DDNGE-50S-P1-408 | ITT Interconnect Solutions | - Bulk (Alt: DDNGE-50S-P1-408) RoHS : Not Compliant |
| 0 | ||
| DDNGZ-50S-P1 | ITT Interconnect Solutions | - Bulk (Alt: DDNGZ-50S-P1) RoHS : Not Compliant |
| 0 | ||
| KRP-C-1350SP | Eaton Corporation | - Bulk (Alt: KRP-C-1350SP) RoHS : Compliant |
| 0 | ||
| LPN-RK-350SP | Eaton Corporation | - Bulk (Alt: LPN-RK-350SP) RoHS : Not Compliant |
| 0 | ||
| DDNGX-50S-P1-408 | ITT Interconnect Solutions | - Bulk (Alt: DDNGX-50S-P1-408) RoHS : Not Compliant |
| 0 | ||
![]() Newark | MCKP4050SP1R16-4785 | SPC Multicomp | Piezo, 400Hz, 85Db; Driver Type:General Purpose; Impedance:16Ohm; Power Rating Nom:700Mw; Resonant Frequency:650Hz; Sound Pressure Level (Spl):88Db; Speaker Shape:Round; Frequency Range:0Hz To 7Khz; Ip Rating:-; Product Range:- Rohs Compliant: Yes RoHS : Compliant |
| 290 | |
| 48.62.7.024.0050SPA | FINDER SpA | Relay Interface Mod, Dpdt, 10A, 24Vdc; |Finder Relays, Inc. 48.62.7.024.0050SPA RoHS : Compliant |
| 110 | ||
| HO 250-/SP30 | LEM Holdings SSA | Current Sensor, 250A, Voltage O/P, 5Vdc; |Lem HO 250-/SP30 RoHS : Compliant |
| 47 | ||
| 48.52.7.024.0050SPA | FINDER SpA | Relay, Dpdt, 250Vac, 8A; Contact Configuration:Dpdt; Coil Voltage:24Vdc; Contact Current:8A; Product Range:48 Series; Relay Mounting:Din Rail; Coil Type:Dc Sensitive; Contact Voltage Vac:250V; Relay Terminals:Screw; Coil Resistance:-Rohs Compliant: Yes RoHS : Compliant |
| 33 | ||
| EXT-K-C1-5.0-SP-SS-JIS | Labfacility Limited | Thermocouple, Type K, 5M, Jis; |Labfacility EXT-K-C1-5.0-SP-SS-JIS RoHS : Compliant |
| 15 | ||
| 89078650SP | nVent Hoffman | Mounting Gasket; |Nvent Hoffman 89078650SP RoHS : Compliant |
| 12 | ||
| MB-ISK-S30-150-SP-JIS | Labfacility Limited | Thermocouple, Type K, 150Mm, Jis; |Labfacility MB-ISK-S30-150-SP-JIS RoHS : Compliant |
| 10 | ||
| LPJ-50SP | Eaton Bussmann | Fuse, 50A, 600V, Time Delay; Product Range:Low-Peak Lpj Series; Fuse Current:50A; Voltage Rating Vac:600V; Voltage Rating Vdc:300V; Fuse Size Metric:27Mm X 60.3Mm; Fuse Size Imperial:1-1/16" X 2-3/8"; Blow Characteristic:Time Delay Rohs Compliant: No RoHS : Not Compliant |
| 9 | ||
| X2-3.5-0-SP-SM | TE Connectivity | Heat-Shrink Tubing, 2:1, Blk, 200M Reel; |Te Connectivity Raychem X2-3.5-0-SP-SM RoHS : Compliant |
| 4 | ||
ZH150-5/2.5-0-SP![]() | TE Connectivity | Heat Shrink Tubing, 5Mm, Black; Shrink R |Te Connectivity Raychem ZH150-5/2.5-0-SP RoHS : Compliant |
| 3 | ||
| X4-2.5-0-SP-SM | TE Connectivity | Heat-Shrink Tubing, 2:1, Black, 2.8Mm; |Te Connectivity Raychem X4-2.5-0-SP-SM RoHS : Compliant |
| 2 | ||
| CGPT-1.5/0.5-0-SP | TE Connectivity | Heat-Shrink Tubing, 3:1, Blk, 1.5Mm; |Te Connectivity Raychem CGPT-1.5/0.5-0-SP RoHS : Compliant |
| 2 | ||
| 89096950SP | nVent Hoffman | Swt Spdt Malf 500 425 Hr; |Nvent Hoffman 89096950SP RoHS : Compliant |
| 1 | ||
| 99049050SP | nVent Hoffman | Cply Tube 0.049 Id X 50; |Nvent Hoffman 99049050SP RoHS : Compliant |
| 1 | ||
| ZHTM-3/1.5-0-SP | TE Connectivity | Heat-Shrink Tubing, 2:1, 3Mm, Black; |Te Connectivity Raychem ZHTM-3/1.5-0-SP RoHS : Compliant |
| 1 | ||
![]() RS | 48.61.7.024.0050.SPA | FINDER SpA | INTERFACE MODULE, SPDT 16A, 24V DC COIL, AGCDO CONTACT, LED, DIODES, SCREW TERM |
| 27 | |
| 48.61.7.012.0050.SPA | FINDER SpA | INTERFACE MODULE, SPDT 16A, 12V DC COIL, AGCDO CONTACT, LED, DIODES, SCREW TERM |
| 16 | ||
| LPN-RK-50SP | Eaton Bussmann | FUSE CLASS RK1 SLOW BLOW CARTRIDGE HOLDER MOUNT CLIP TERM 250VAC/DC 50A RoHS : Unknown |
| 10 | ||
| 58.P4.9.024.0050.SPA | FINDER SpA | INTERFACE MODULE, 4PDT 7A, 24V DC COIL, LED, PUSH-IN TERMINAL SOCKET |
| 10 | ||
| 4C.P1.9.024.0050.SPA | FINDER SpA | INTERFACE MODULE, SPDT 10A, 24V DC COIL, PUSH-IN TERMINAL SOCKET |
| 6 | ||
| ITV2050-SPN-N3-DUX02357 | SMC Corporation of America | REGULATOR, E/P, 0.9 MPA, PROFINET, ITV |
| 4 | ||
| LPJ-150SP | Eaton Bussmann | FUSE, CYLINDER, TIME LAG, 150A, CLASS J, 1.63X5.75", CARTRIDGE, 600/300VAC/VDC RoHS : Unknown |
| 3 | ||
| LPJ-150SPI | Eaton Bussmann | FUSE CLASS J SLOW BLOW CARTRIDGE BLADE HOLDER MOUNT KNIFE TERM 600VAC 150A |
| 3 | ||
| LPS-RK-350SP | Eaton Bussmann | FUSE CLASS RK1 SLOW BLOW CARTRIDGE HOLDER MOUNT CLIP TERM 600VAC 300VDC 350A RoHS : Unknown |
| 3 | ||
| 4C.01.9.012.0050.SPA | FINDER SpA | INTERFACE MODULE, SPDT 16A, 12V DC COIL, SCREW TERMINAL SOCKET |
| 3 | ||
| LPN-RK-350SP | Eaton Bussmann | FUSE CLASS RK1 SLOW BLOW CARTRIDGE HOLDER MOUNT CLIP TERM 250VAC/DC 350A RoHS : Unknown |
| 2 | ||
| LPS-RK-50SP | Eaton Bussmann | INDUSTRIAL & ELECTRICAL FUSES 600V 50A DUAL ELEMENT TIME DELAY RoHS : Unknown |
| 1 | ||
| LPN-RK-250SP | Eaton Bussmann | FUSE CLASS RK1 SLOW BLOW CARTRIDGE HOLDER MOUNT CLIP TERM 250VAC/DC 250A RoHS : Unknown |
| 1 | ||
| LPS-RK-450SP | Eaton Bussmann | FUSE CLASS RK1 SLOW BLOW CARTRIDGE HOLDER MOUNT CLIP TERM 600VAC 300VDC 450A RoHS : Unknown |
| 1 | ||
| LPS-RK-250SP | Eaton Bussmann | FUSE CLASS RK1 SLOW BLOW CARTRIDGE HOLDER MOUNT CLIP TERM 600VAC 300VDC 250A RoHS : Unknown |
| 1 | ||
![]() Bisco Industries | 0.078X0.750SP 42 PS | PINS | 5,300 | |||
| 0.078X1.250SP 42 PS | PINS | 3,600 | ||||
| 0.187X0.750SP ST PL | PINS | 1,362 | ||||
| 0.156X0.250SP ST PL | PINS | 675 | ||||
| 0.125X0.250SP 42 PS | PINS | 640 | ||||
| 0.078X1.250SP SS PS | PINS | 476 | ||||
| 0.125X0.250SP ST ZC | PINS | 400 | ||||
| L050-SPIDER-SOX | MISC. FITTINGS/ELBOWS | 285 | ||||
| 0.093X0.250SP SS PS | PINS | 275 | ||||
| 310X11250SPG9V | MISC. INDUSTRIAL HRD | 150 | ||||
| 0.250X1.250SP SS PS | PINS | 97 | ||||
| 0.375X1.250SP ST C1 | PINS | 84 | ||||
| 0.094X0.250SP BCP PL | PINS | 79 | ||||
| 5100-250SPPB | Rotor Clip Company Inc | 73 | ||||
| 5100-50SPPB | Rotor Clip Company Inc | 14 | ||||
![]() Rochester Electronics | R8A66150SP#D1 | Renesas Electronics Corporation | 12-Bit I/O Expander RoHS : Compliant |
| 23,566 | |
| R8A66150SP#T1 | Renesas Electronics Corporation | 12-Bit I/O Expander RoHS : Compliant |
| 383 | ||
![]() Sager | 50SP45-01-1-08N-C | Grayhill Inc | 50SP45-01-1-08N-C |
| 0 | |
| ZHTM-3/1.5-0-SP | TE Connectivity | Heat Shrink Tubing & Sleeves HS-TBG 3MM BLK PRICE PER METER RoHS : Compliant | 0 | |||
| LV100-750/SP4 | LEM Holdings SSA | Industrial Current Sensors RoHS : Compliant | 0 | |||
| MMSD-02-20-S-04.50-S-P | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| MMSD-15-24C-L-08.50-S-P | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| EXN/M50/SP | ABB Group | Cable Glands, Strain Reliefs & Cord Grips | 0 | |||
| 50SP45-01-1-05N | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant |
| 0 | ||
| 50SPT36-01B04N | Grayhill Inc | Rotary Switches 50SPT36-01-1-04N |
| 0 | ||
| 50SP36-01-1-03N | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant |
| 0 | ||
| 50SPT36-01-2-03S | Grayhill Inc | Rotary Switches | 0 | |||
| 50SPT45-01-1-08N-F | Grayhill Inc | Rotary Switches RoHS : Compliant |
| 0 | ||
| MT2000-0.265-0-SP | TE Connectivity | Heat Shrink Tubing & Sleeves HS-TBG PRICE PER FT | 0 | |||
| LV100-150/SP4 | LEM Holdings SSA | Industrial Current Sensors | 0 | |||
| KRP-C-1350SP | Eaton Bussmann | Industrial & Electrical Fuses 1350A RoHS : Unknown | 0 | |||
| HCTE-0875-0-SP | TE Connectivity | Spiral Wraps, Sleeves, Tubing & Conduit HCTE CONDUIT BK PRICE PER FT RoHS : Compliant | 0 | |||
![]() Ameya Holding Limited | SBRT10U50SP5-13 | Diodes Incorporated | SBRT10U50SP5 Series 50 V 10 A SMT Trench Super Barrier Rectifier - POWERDI5 RoHS : Compliant | 8,160 | ||
| SBRT15U50SP5-13 | Diodes Incorporated | SBRT15U50SP5 Series 50 V 15 A Trench Super Barrier Rectifier - POWERDI-5 RoHS : Compliant | 368 | |||
![]() ComSIT USA | DMPH6050SPDQ13 | Diodes Incorporated | AVAILABLE EU | 3,110 | ||
![]() ComSIT USA | VS40CTQ150SPBF | Vishay Intertechnologies | SCHOTTKY RECTIFIER, 2 X 20 A Rectifier Diode, Schottky, 1 Phase, 2 Element, 20A, 150V V(RRM), Silicon RoHS : Compliant | 4,600 | ||
| BLM41P750SPTM0003 | Murata Manufacturing Co Ltd | SURFACE MOUNT CHIP FERRITE BEADS EMI FILTER Ferrite Chip, 1 Function(s), 3A, 2 Pin(s) RoHS : Compliant | 1,600 | |||
| VS20CTQ150SPBF | Vishay Intertechnologies | 2 X 10 A SCHOTTKY RECTIFIER Rectifier Diode, Schottky, 1 Phase, 2 Element, 10A, 150V V(RRM), Silicon RoHS : Compliant | 900 | |||
![]() Interstate Connecting Components | ZH150-5/2.5-0-SP![]() | TE Connectivity | EH3263-000 ZH150-5/2.5-0-SP RoHS : Compliant |
| 0 | |
| ZHTM-3/1.5-0-SP | TE Connectivity | 2411034003 2-1191771-7 RoHS : Compliant |
| 0 | ||
| DDNGL-50S-P1 | ITT Interconnect Solutions | DDNGL-50S-P1 RoHS : Not Compliant | 0 | |||
| TUGA-GP-3/1.5-0-SP.M | TE Connectivity | TUGA-GP-3/1.5-0-SP | 0 | |||
| ATUM-4.5/1.5-0-SP | TE Connectivity | NB10884001 |
| 0 | ||
| GPO-135-19/9.5-0-SP | TE Connectivity | RoHS : Compliant |
| 0 | ||
| DDNGE-50S-P1-408 | ITT Interconnect Solutions | DDNGE-50S-P1-408 | 0 | |||
| DDNGZ-50S-P1 | ITT Interconnect Solutions | DDNGZ-50S-P1 | 0 | |||
| HCTE-0875-0-SP | TE Connectivity | HCTE-0875-0-SP RoHS : Compliant |
| 0 | ||
| DDNGX-50S-P1-408 | ITT Interconnect Solutions | DDNGX-50S-P1-408 | 0 | |||
| DDNGX-50S-P1-A191 | ITT Interconnect Solutions | DDNGX-50S-P1-A191 | 0 | |||
| NETM1000-5-0-SP | TE Connectivity | NETM1000-5-0-SP RoHS : Compliant | 0 | |||
| CGPT-19/9.5-0-SP | TE Connectivity | BLACK, 2:1, SINGLE WALL TUBING 5069874011 RoHS : Compliant |
| 0 | ||
| TUGA-GP-3/1.5-0-SP | TE Connectivity | TUGA-GP-3/1.5-0-SP RoHS : Compliant | 0 | |||
| LSTT-9.5-0-SP | TE Connectivity | LSTT-9.5-0-SP RoHS : Compliant | 0 | |||
![]() PEI Genesis | PCST-12B.50 SPLIT | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | ||
| DDMA50SPNMBK128K134 | ITT Interconnect Solutions |
| 0 | |||
| DDMME50SP | ITT Interconnect Solutions |
| 0 | |||
![]() Chip 1 Exchange | ER14250-SPC1520/W | INSTOCK | 42,840 | |||
| CGPE-105-0.825-0-SP | TE Connectivity | INSTOCK | 26,000 | |||
| V2-1.5-0-SP-SM | TE Connectivity | INSTOCK RoHS : Compliant | 19,760 | |||
| NETM1000-5-0-SP | TE Connectivity | INSTOCK RoHS : Compliant | 6,500 | |||
| SBRT15U50SP5-13 | Diodes Incorporated | INSTOCK RoHS : Compliant | 5,440 | |||
| DWHF-4.5/1.5-0-SP | TE Connectivity | INSTOCK RoHS : Compliant | 3,510 | |||
![]() Avnet Abacus | 14150/SP | Bulgin | REPLACEMENT SHIELDED RJ45 SALEABLE (Alt: 14150/SP) RoHS : Compliant | 0 | ||
| DDNG-50S-P1 | ITT Interconnect Solutions | Conn DSubminiature RCP 50 POS Press Fit ST ThruHole 50 Terminal 1 Port (Alt: 121584-0025) RoHS : Compliant | 0 | |||
| DDNGE-50S-P1 | ITT Interconnect Solutions | (Alt: 121584-0030) RoHS : Not Compliant | 0 | |||
| 50SP45-01-1-05N | Grayhill Inc | Switch Rotary SP5T 5 Flatted Shaft PC Pins 02A 220VAC 28VDC (Alt: 50SP45-01-1-05N) RoHS : Compliant | 0 | |||
| 50SP45-01-1-03N | Grayhill Inc | Switch Rotary SP3T 3 Flatted Shaft PC Pins 02A 220VAC 28VDC (Alt: 50SP45-01-1-03N) RoHS : Compliant | 0 | |||
| 50SP36-01-1-04N | Grayhill Inc | Switch Rotary SP4T 4 Flatted Shaft PC Pins 02A 220VAC 28VDC (Alt: 50SP36-01-1-04N) RoHS : Compliant | 0 | |||
| 50SP45-01-2-04N | Grayhill Inc | Switch Rotary DP4T 4 Flatted Shaft PC Pins 02A 220VAC 28VDC (Alt: 50SP45-01-2-04N) RoHS : Compliant | 0 | |||
| 50SP45-01-1-08N | Grayhill Inc | Switch Rotary SP8T 8 Flatted Shaft PC Pins 02A 220VAC 28VDC (Alt: 50SP45-01-1-08N) RoHS : Compliant | 0 | |||
| 50SP60-01-1-03N | Grayhill Inc | Switch Rotary SP3T 3 Flatted Shaft PC Pins 02A 220VAC 28VDC (Alt: 50SP60-01-1-03N) RoHS : Compliant | 0 | |||
| 50SP45-01-1-06N | Grayhill Inc | Switch Rotary SP6T 6 Flatted Shaft PC Pins 02A 220VAC 28VDC (Alt: 50SP45-01-1-06N) RoHS : Compliant | 0 | |||
| 50SPT45-01-1-05N | Grayhill Inc | Switch Rotary SP5T 5 Flatted Shaft PC Pins 02A 220VAC 28VDC (Alt: 50SPT45-01B05N) RoHS : Compliant | 0 | |||
| DDNG-50S-P1-A191 | ITT Interconnect Solutions | Conn DSubminiature SKT 50 POS Solder RA ThruHole 50 Terminal 1 Port (Alt: 121584-0075) RoHS : Not Compliant | 0 | |||
| 50SPT90-01-2-02N | Grayhill Inc | Switch Rotary DPDT 2 Flat Shaft PC Pins 02A 28VDC 220V (Alt: 50SPT90-01C02N) RoHS : Compliant | 0 | |||
| 50SP45-01-1-08N-F | Grayhill Inc | (Alt: 50SP45-01B08N) RoHS : Compliant | 0 | |||
| 50SPT60-01-1-06N-F | Grayhill Inc | (Alt: 50SPT60-01B06N) RoHS : Compliant | 0 | |||
![]() Avnet Asia | SBRT15U50SP5-13D | Diodes Incorporated | (Alt: SBRT15U50SP5-13D) RoHS : Compliant | 0 | ||
| SBRT10U50SP5-13D | Diodes Incorporated | Schottky Rectifier, 50 V, 10 A, Single, PowerDI 5, 3 Pins, 450 mV (Alt: SBRT10U50SP5-13D) RoHS : Compliant | 0 | |||
| SBRT10U50SP5-13D-52 | Diodes Incorporated | (Alt: SBRT10U50SP5-13D-52) RoHS : Compliant | 0 | |||
| SBRT15U50SP5-7 | Diodes Incorporated | Schottky Rectifier, 50 V, 15 A, Single, PowerDI 5, 3 Pins, 470 mV (Alt: SBRT15U50SP5-7) RoHS : Compliant | 0 | |||
| SBRT15U50SP5-13 | Diodes Incorporated | (Alt: SBRT15U50SP5-13) RoHS : Compliant | 0 | |||
| AP64350SP-13 | Diodes Incorporated | DC/DC Switching Regulator, Adjustable, Synchronous Buck (Step Down), Single Output, 800 mV to 40 V (Alt: AP64350SP-13) RoHS : Compliant | 0 | |||
| SBR15U50SP5-13 | Diodes Incorporated | (Alt: SBR15U50SP5-13) RoHS : Compliant |
| 0 | ||
| AP7375Q-50SP-13 | Diodes Incorporated | (Alt: AP7375Q-50SP-13) RoHS : Compliant | 0 | |||
| DMPH6050SPD-13 | Diodes Incorporated | (Alt: DMPH6050SPD-13) RoHS : Compliant | 0 | |||
| SBRT10U50SP5-13 | Diodes Incorporated | (Alt: SBRT10U50SP5-13) RoHS : Compliant | 0 | |||
| DMP6050SPS-13 | Diodes Incorporated | (Alt: DMP6050SPS-13) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | DMPH6050SPD-13 | Diodes Incorporated | (Alt: DMPH6050SPD-13) RoHS : Compliant | 2,500 | ||
| AP64350SP-13 | Diodes Incorporated | DCDC Switching Regulator Adjustable Synchronous Buck Step Down Single Output 800 mV to 40 V (Alt: AP64350SP-13) RoHS : Compliant | 0 | |||
| DMP6050SPS-13 | Diodes Incorporated | (Alt: DMP6050SPS-13) RoHS : Compliant | 0 | |||
| SBRT15U50SP5-7 | Diodes Incorporated | Schottky Rectifier 50 V 15 A Single PowerDI 5 3 Pins 470 mV (Alt: SBRT15U50SP5-7) RoHS : Compliant | 0 | |||
| DMP6050SPSW-13 | Diodes Incorporated | (Alt: DMP6050SPSW-13) RoHS : Compliant | 0 | |||
| SBR15U50SP5-13 | Diodes Incorporated | (Alt: SBR15U50SP5-13) RoHS : Compliant | 0 | |||
SBR2A150SP5-13![]() | Diodes Incorporated | (Alt: SBR2A150SP5-13) RoHS : Compliant | 0 | |||
| SBRT15U50SP5-13 | Diodes Incorporated | (Alt: SBRT15U50SP5-13) RoHS : Compliant | 0 | |||
| DMPH6050SPDQ-13 | Diodes Incorporated | (Alt: DMPH6050SPDQ-13) RoHS : Compliant | 0 | |||
| AP7375Q-50SP-13 | Diodes Incorporated | (Alt: AP7375Q-50SP-13) RoHS : Compliant | 0 | |||
| SBRT10U50SP5-13 | Diodes Incorporated | (Alt: SBRT10U50SP5-13) RoHS : Compliant | 0 | |||
| SBRT15U50SP5-13D | Diodes Incorporated | (Alt: SBRT15U50SP5-13D) RoHS : Compliant | 0 | |||
| SBRT10U50SP5-13D | Diodes Incorporated | Schottky Rectifier 50 V 10 A Single PowerDI 5 3 Pins 450 mV (Alt: SBRT10U50SP5-13D) RoHS : Compliant | 0 | |||
| C13085_MIRELLA-50-S-PF | LEDIL | Round Reflector For LED (Alt: C13085_MIRELLA-50-S-PF) RoHS : Compliant | 0 | |||
| C12480_MIRELLA-50-S-PIN | LEDIL | Mirella Reflector With Metal Color (Alt: C12480_MIRELLA-50-S-PIN) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | 108-00019-050-SP | Silex Technology America Inc | (Sample Pack) Prestta WLAN Antenna - 6 Piece Sample Pack, Isolated Magnetic Dipole (IMD) stamped metal antenna for use with SX-SDCAG, SX-SDMGN/SX-SDMAN, and SX-560/SX-570/SX-580 |
| 0 | |
![]() Component Electronics, Inc | BLM41P750SPTM00-03 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 6,407 | |
| BLM11B750SPTM00-03 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 3,985 | ||
| BLM21B050SPT | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,700 | ||
| LPJ-150SP | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 10 | ||
![]() EBV Elektronik | C13085_MIRELLA-50-S-PF | LEDIL | Round Reflector For LED (Alt: C13085_MIRELLA-50-S-PF) RoHS : Compliant | 1,960 | ||
| C18450_SPORT-2X2-FT4 | LEDIL | MultiLens for LUXEON 5050 Square LES NV4WB35AM XPG3 LUXEON 5050 HE SFT12RWA (Alt: C18450_SPORT-2X2-FT4) RoHS : Compliant | 0 | |||
| C12480_MIRELLA-50-S-PIN | LEDIL | Mirella Reflector With Metal Color (Alt: C12480_MIRELLA-50-S-PIN) RoHS : Compliant | 0 | |||
![]() Master Electronics | ATUM-4.5/1.5-0-SP | TE Connectivity | ATUM-4.5/1.5-0-SP RoHS : Compliant |
| 300 | |
| HCTE-0875-0-SP | TE Connectivity | Cable Accessories Corrugated Tubing Ethylene Tetrafluoroethylene Black Spool RoHS : Compliant |
| 200 | ||
| 50SP45-01-1-08N-C | Grayhill Inc | 50SP45-01-1-08N-C RoHS : Compliant |
| 19 | ||
| ZHTM-3/1.5-0-SP | TE Connectivity | Heat Shrink Tubing ST Cross Linked Polyolefin Black Thick Piece RoHS : Compliant |
| 2 | ||
ZH150-5/2.5-0-SP![]() | TE Connectivity | ZH150-5/2.5-0-SP MOQ Reduction RoHS : Compliant |
| 0 | ||
| DDNGL-50S-P1 | ITT Interconnect Solutions | Connector D-sub Rectangular DNG D 50 Rec | ITT Cannon DDNGL50SP1 RoHS : Compliant |
| 0 | ||
| MMSD-02-20-S-04.50-S-P | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| MMSD-15-24C-L-08.50-S-P | Samtec Inc | .100 Mini Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| EXN/M50/SP | Thomas & Betts | Stopping Plug - M50 Thread - Suitable for Use in Zones 1 2 21 and 22 Exd I and Exd IIC - UL1203 - Nickel Plated Brass. RoHS : Compliant |
| 0 | ||
| 650SP010 | Ohmite Mfg Co | RoHS : Compliant |
| 0 | ||
| R88ACA1H50SPA | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| GPO-135-19/9.5-0-SP | TE Connectivity | GPO-135-19/9.5-0-SP RoHS : Compliant |
| 0 | ||
| MT2000-0.265-0-SP | TE Connectivity | Heat Shrink Tubing ST Polyolefin Black Thin Spool MOQ Reduction RoHS : Compliant |
| 0 | ||
| DDNGE-50S-P1-408 | ITT Interconnect Solutions | DDNGE-50S-P1-408 RoHS : Compliant |
| 0 | ||
| DDNGZ-50S-P1 | ITT Interconnect Solutions | D Sub 130363-0001 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W01950/SP | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Low Loss Cable Using LMR-240-DB Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable using LMR-240-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable using LMR-240-DB coax with heatshrink, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W01950/SP can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W01950/SP is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable using LMR-240-DB coax with heatshrink, LF solder. | 5,380 | ||
| PE3W01950/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Male Low Loss Cable 48 Inch Length Using LMR-240-DB Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 48 inch length using LMR-240-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 48 inch length using LMR-240-DB coax with heatshrink, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W01950/SP-48 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W01950/SP-48 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 48 inch length using LMR-240-DB coax with heatshrink, LF solder. |
| 1,076 | ||
| PE3W01950/SP-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-240-DB Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 12 inch length using LMR-240-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 12 inch length using LMR-240-DB coax with heatshrink, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W01950/SP-12 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W01950/SP-12 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 12 inch length using LMR-240-DB coax with heatshrink, LF solder. |
| 1,076 | ||
| PE3W01950/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-240-DB Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 24 inch length using LMR-240-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 24 inch length using LMR-240-DB coax with heatshrink, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W01950/SP-24 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W01950/SP-24 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 24 inch length using LMR-240-DB coax with heatshrink, LF solder. |
| 1,076 | ||
| PE3W01950/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-240-DB Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 60 inch length using LMR-240-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 60 inch length using LMR-240-DB coax with heatshrink, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W01950/SP-60 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W01950/SP-60 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 60 inch length using LMR-240-DB coax with heatshrink, LF solder. |
| 1,076 | ||
| PE3W01950/SP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-240-DB Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 36 inch length using LMR-240-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 36 inch length using LMR-240-DB coax with heatshrink, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W01950/SP-36 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W01950/SP-36 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 36 inch length using LMR-240-DB coax with heatshrink, LF solder. |
| 1,076 | ||
| PE3W03350/SP1 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Full Detent SMP Male Bulkhead to SMP Female Right Angle Cable Using RG405 Coax., Radio frequency assembly full detent SMP male bulkhead to SMP female right angle cable using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Full detent SMP male bulkhead to SMP female right angle cable using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a male gender on end 1 and female on end 2. This SMP to SMP cable is a male to female coax assembly, PE3W03350/SP1, can also be known as a SMP plug to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP plug to SMP jack cable assembly PE3W03350/SP1 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency SMP male bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03350/SP1 can also be used in the other direction and will be right angle SMP female to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this full detent SMP male bulkhead to SMP female right angle cable using RG405 coax. | 0 | |||
![]() Vyrian | VS-10CTQ150SPBF![]() | Vishay Intertechnologies | Rectifier Diode, Schottky, 1 Phase, 2 Element, 5A, 150V V(RRM), Silicon, TO-263AB RoHS : Compliant | 16,021 | ||
| AP65550SP-13 | Diodes Incorporated | Switching Regulator, 7.9A, 650kHz Switching Freq-Max, PDSO8 | 14,407 | |||
| SBRT15U50SP5-7D | Diodes Incorporated | Rectifier Diode, 1 Phase, 1 Element, 15A, 50V V(RRM), Silicon | 13,375 | |||
| LT8650SPJV#TRPBF | Analog Devices Inc | RoHS : Compliant | 11,846 | |||
| AP65450SP-13 | Diodes Incorporated | Switching Regulator, 6.9A, 650kHz Switching Freq-Max, PDSO8 | 10,803 | |||
| LM3550SPX | Texas Instruments | LED Driver | 9,720 | |||
| LM3550SP | Texas Instruments | LED Driver | 9,710 | |||
| TGS8250SPC | Texas Instruments | SPDT, 1 Func, GAAS | 9,149 | |||
| TGF1350SPMX | Texas Instruments | RF Small Signal Field-Effect Transistor, 1-Element, KU Band, Gallium Arsenide, N-Channel, Junction FET | 6,973 | |||
| ADP1850SP-EVALZ | Analog Devices Inc | 6,380 | ||||
| HCTE-0375-0-SP-CS7397 | TE Connectivity | Heat Shrinks RoHS : Compliant | 5,870 | |||
EPF10K50SPC208-2![]() | Altera Corporation | Loadable PLD, 9.5ns, CMOS, PQFP208 | 3,185 | |||
EPF10K50SPC240-1![]() | Altera Corporation | Loadable PLD, 8ns, CMOS, PQFP240 | 2,549 | |||
EPF10K50SPC240-2![]() | Altera Corporation | Loadable PLD, 9.5ns, CMOS, PQFP240 | 2,282 | |||
| IRG4PH50SPBFEL | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 57A I(C), 1200V V(BR)CES, N-Channel, TO-247AC | 862 | |||
![]() Waytek, Inc. | DFN1.25BK 50' SPOOLS | Techflex Inc | Techflex Heavy-Duty Dura-Flex Sleeving DF1.25BK 50' SPOOLS is black 1.25" nylon sleeving on a 50' spool. It is non-expandable but easily slides over hoses and cables, resists chemicals, UV damage, rot, engine chemicals, and salt, and is built for harsh industrial environments. |
| 3,300 | |
| CFBAR1-250SP | Eaton Electronics | Single 1/4-20 Stud MRBF Fuse Holder 3/8" Mounting Hole HARDWARE NOT INCLUDED 45575 |
| 1,716 | ||
| DFN2.38BK 50' SPOOLS | Techflex Inc | Techflex Heavy-Duty Dura-Flex Sleeving DFN2.38BK 50' SPOOLS is black 2.38" nylon sleeving on a 50' spool. It is non-expandable but easily slides over hoses and cables, resists chemicals, UV damage, rot, engine chemicals, and salt, and is built for harsh industrial environments. |
| 1,400 | ||
| DFN1.75BK 50' SPOOLS | Techflex Inc | Techflex Heavy-Duty Dura-Flex Sleeving DFN1.75BK 50' SPOOLS is black 1.75" nylon sleeving on a 50' spool. It is non-expandable but easily slides over hoses and cables, resists chemicals, UV damage, rot, engine chemicals, and salt, and is built for harsh industrial environments. |
| 850 | ||
| CFBAR2-250SP | Eaton Electronics | Double 1/4-20 Stud MRBF Fuse Holder 3/8" Mounting Hole HARDWARE NOT INCLUDED |
| 246 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |