50BG-AB3-R Price, nhà phân phối, Stock

Key Specifications, Generic Name: SPF-250, Flex Type: Corrugated, Impedance: 50 Ohm, Dielectric Type: Foam PE, Velocity of Propagation: 83 %, Jacket Diameter: 0.303 in, Jacket Material: FRPE, No. of Shields: 1, Passive Intermodulation: -160 dBc, Frequency, Max: 6 GHz, Max Operating Temperature: 85 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, One Time: 1.25 in, Coax Type: Coax. Low Loss SPF-250 Rated Corrugated Coax Cable with Black FRPE Jacket Superflexible Fire Rated. SPF-250-BULK part number from Pasternack is a SPF-250 coax cable that is corrugated. Pasternack SPF-250 corrugated coax cable is 50 Ohm and has a Foam PE dielectric. Our SPF-250 coax is constructed with a 0.303 jacket made of FRPE. SPF-250 coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 6 GHz. Pasternack SPF-250 coax cables are part of over 40,000 RF, microwave and millimeter wave components. SPF-250 cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using SPF-250 or other coax can be built and shipped same day as well.

1 : $4.53
25 : $4.35
50 : $4.21
100 : $4.12

660

PE9850B-15

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-28, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz. WR-28 Waveguide Standard Gain Horn Antenna Operating From 26.5 GHz to 40 GHz With a Nominal 15 dBi Gain With UG-599/U Square Cover Flange. Pasternack’s PE9850B-15 WR-28 waveguide horn is also known as a waveguide horn antenna. This WR-28 standard gain horn waveguide antenna has a nominal gain of 15 dBi. Our waveguide horn can operate at frequencies ranging from 26.5 to 40 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 15 dBi waveguide horn from Pasternack has an overall length of 1.87 inches, a width of 0.84 inches, and a weight of 0.05 lbs. Our antenna comes with a UG-599/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-28 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-28 waveguide horn antenna with 15 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,710.0
5 : $1,641.6
10 : $1,573.2
25 : $1,504.8

PE3W05050/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/2SFHC, RF Cable Type: 1/2" Superflexible, RF Cable Impedance: 50 Ohm. 7/16 DIN Female to 7/16 DIN Female Cable Using 1/2 inch Superflexible Coax with HeatShrink., Pasternack’s PE3W05050/BK/HS 7/16 DIN female to 7/16 DIN female RF cable assembly using 1/2" superflexible coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN female to 7/16 DIN female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assembly has a female gender on end 1 and a female on end 2. PE3W05050/BK/HS can also be known as a 7/16 DIN jack to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 1.18-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05050/BK/HS RF cable has a PE jacket of 0.519-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 120 dB. Our 7/16 DIN female to 7/16 DIN female cable has a maximum VSWR of 1.21:1. This PE3W05050/BK/HS 7/16 DIN jack to 7/16 DIN jack cable assembly is built with 1/2" superflexible, which is a corrugated coax type. The Pasternack corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This 7/16 DIN jack to 7/16 DIN jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN RF cable assembly as per your requirements.

PE39350B-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female to White FAKRA Jack Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly SMA female to white FAKRA jack cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to white FAKRA jack cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our SMA to FAKRA cable assemblies have a female gender on end 1 and jack on end 2. This SMA to FAKRA cable is a female to jack coax assembly, PE39350B-12, can also be known as a SMA jack to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA female cable assembly PE39350B-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA female to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39350B-12 can also be used in the other direction and will be FAKRA jack to SMA female cable assembly if the opposite connectivity is required. SMA jack to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to white FAKRA jack cable 12 inch length using RG174 coax.

1 : $58.89
25 : $55.95
50 : $53.0
100 : $50.65

PE38750B-48

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 48 inches. White FAKRA Jack to FAKRA Jack Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly white FAKRA jack to FAKRA jack cable 48 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. White FAKRA jack to FAKRA jack cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our FAKRA to FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a jack to jack coax assembly, PE38750B-48, can also be known as a FAKRA female to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE38750B-48 is built with RG174 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency FAKRA jack to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. FAKRA female to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this white FAKRA jack to FAKRA jack cable 48 inch length using RG174 coax.

1 : $47.09
25 : $44.74
50 : $42.38
100 : $40.5

PE39350B-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Female to White FAKRA Jack Cable 24 Inch Length Using RG174 Coax., Radio frequency assembly SMA female to white FAKRA jack cable 24 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to white FAKRA jack cable 24 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our SMA to FAKRA cable assemblies have a female gender on end 1 and jack on end 2. This SMA to FAKRA cable is a female to jack coax assembly, PE39350B-24, can also be known as a SMA jack to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA female cable assembly PE39350B-24 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA female to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39350B-24 can also be used in the other direction and will be FAKRA jack to SMA female cable assembly if the opposite connectivity is required. SMA jack to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to white FAKRA jack cable 24 inch length using RG174 coax.

1 : $79.19
25 : $75.23
50 : $71.27
100 : $68.1

PE9850B-2F-30

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-28, Gain Min: 30, Beam Width, 3dB V: 5, Beam Width, 3dB H: 5, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz. WR-28 Waveguide Standard Gain Horn Antenna Operating from 26.5 GHz to 40 GHz with a Nominal 30 dB Gain 2.92mm Female Input. The PE9850B-2F-30 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-28 input and a waveguide to coaxial transition adapter. Our WR-28 waveguide antenna features a 2.92mm female connector. This single-band directional antenna comes with a UG-599/U square cover flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our WR-28 standard gain horn antenna with a 2.92mm female input has a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. Pasternack’s PE9850B-2F-30 waveguide horn antenna has a typical gain of 30 dB. Our waveguide antenna has a typical vertical and horizontal beam width of 5 degrees at 3 dB. This antenna has a length of 13.61 inches, a width of 5.09 inches, and a weight of 0.44 lbs. This WR-28 waveguide horn antenna with 30 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,675.0
5 : $2,621.5
10 : $2,568.0
25 : $2,514.5

PE38750BLF/HS

Pasternack Enterprises

PE39350B-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female to White FAKRA Jack Cable 60 Inch Length Using RG174 Coax., Radio frequency assembly SMA female to white FAKRA jack cable 60 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to white FAKRA jack cable 60 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our SMA to FAKRA cable assemblies have a female gender on end 1 and jack on end 2. This SMA to FAKRA cable is a female to jack coax assembly, PE39350B-60, can also be known as a SMA jack to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA female cable assembly PE39350B-60 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA female to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39350B-60 can also be used in the other direction and will be FAKRA jack to SMA female cable assembly if the opposite connectivity is required. SMA jack to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to white FAKRA jack cable 60 inch length using RG174 coax.

1 : $62.09
25 : $58.99
50 : $55.88
100 : $53.4

PE39350B-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Female to White FAKRA Jack Cable 36 Inch Length Using RG174 Coax., Radio frequency assembly SMA female to white FAKRA jack cable 36 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to white FAKRA jack cable 36 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our SMA to FAKRA cable assemblies have a female gender on end 1 and jack on end 2. This SMA to FAKRA cable is a female to jack coax assembly, PE39350B-36, can also be known as a SMA jack to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA female cable assembly PE39350B-36 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA female to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39350B-36 can also be used in the other direction and will be FAKRA jack to SMA female cable assembly if the opposite connectivity is required. SMA jack to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to white FAKRA jack cable 36 inch length using RG174 coax.

1 : $62.09
25 : $58.99
50 : $55.88
100 : $53.4

PE-B150-BULK

Pasternack Enterprises

Key Specifications, Generic Name: PE-B150, Flex Type: Flexible, Impedance: 75 Ohm, Dielectric Type: PE, Jacket Diameter: 0.15 in, Jacket Material: PVC, No. of Shields: 1, Attenuation at 1 Ghz.: 20 dB, Power, Max at 1 Ghz.: 25 Watts, Frequency, Max: 5 GHz, Max Operating Temperature: 80 deg C, Center Conductor Type: Stranded, Inner Conductor, Number of Strands: 7, Coax Type: Coax. 75 Ohm Flexible PE-B150 Coax Cable Single Shielded with Black PVC Jacket. PE-B150-BULK part number from Pasternack is a PE-B150 coax cable that is flexible. Pasternack PE-B150 flexible coax cable is 75 Ohm and has a PE dielectric. Our PE-B150 coax is constructed with a 0.15 jacket made of PVC. PE-B150 coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 5 GHz. PE-B150 coax cable has an attenuation at 1 GHz of 20 dB and a maximum power of 25 watts at 1 GHz. Pasternack PE-B150 coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-B150 cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-B150 or other coax can be built and shipped same day as well.

1 : $1.36
25 : $1.29
50 : $1.22
100 : $1.17

PE9850B/2F-15

Pasternack Enterprises

Key Specifications, Gain Min: 15, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz. WR-28 Standard Gain Horn Antenna Operating From 26.5 GHz to 40 GHz, 15 dBi Nominal Gain, 2.92mm Female Input Connector, ProLine. The PE9850B/2F-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Our waveguide antenna features a 2.92mm female connector. This single-band directional antenna comes with a flange. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use and microwave radio systems. Our standard gain horn antenna with a 2.92mm female input has a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. Pasternack’s PE9850B/2F-15 waveguide horn antenna has a typical gain of 15 dB. This antenna has a length of 2.45 inches, a width of 0.76 inches, and a weight of 0.5 lbs. This waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,850.0
5 : $2,736.0
10 : $2,622.0
25 : $2,508.0

PE3W05150/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to BNC Male Cable Using LMR-240-UF Coax with HeatShrink., Pasternack’s PE3W05150/BK/HS right angle SMA male to BNC male RF cable assembly using LMR-240-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a BNC cable connection on the other. Our SMA to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W05150/BK/HS can also be known as a right angle SMA plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05150/BK/HS RF cable has a tpe jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. This PE3W05150/BK/HS SMA plug to BNC plug cable assembly is built with LMR-240-UF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05150/BK/HS can also be used in the other direction and will be a BNC male to right angle SMA male cable assembly if the opposite connectivity is required. This SMA right angle plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to BNC RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

PEWRD750B002

Pasternack Enterprises

Key Specifications, Type of Bend: H-Bend, Waveguide Size 1: WRD-750, Flange Size 1: UG, Waveguide Size 2: WRD-750, Flange Size 2: UG, Frequency, Min: 7.5 GHz, Frequency, Max: 18 GHz. WRD-750 Waveguide H-Bend with UG Square Cover Flange Operating from 7.5 GHz to 18 GHz. PEWRD750B002 is a WR-WRD-750 waveguide bend that is a H-Bend type with a UG flange. Our WR-WRD-750 waveguide bend has a minimum frequency of 7.5 GHz and a maximum frequency of 18 GHz. WR WRD-750 waveguide bend PEWRD750B002 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This WR-WRD-750 H-Bend waveguide with UG flange can ship worldwide the same day as it is purchased as with our other available RF parts.

1 : $957.99
10 : $919.67
25 : $881.35
100 : $843.03

PE9850B-10

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-28, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz. WR-28 Waveguide Standard Gain Horn Antenna Operating From 26.5 GHz to 40 GHz With a Nominal 10 dBi Gain With UG-599/U Square Cover Flange. Pasternack’s PE9850B-10 WR-28 waveguide horn is also known as a waveguide horn antenna. This WR-28 standard gain horn waveguide antenna has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 26.5 to 40 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 10 dBi waveguide horn from Pasternack has an overall length of 1 inches, a width of 0.45 inches, and a weight of 0.3 lbs. Our antenna comes with a UG-599/U square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-28 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-28 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $1,330.0
5 : $1,276.8
10 : $1,223.6
25 : $1,170.4

Teledyne HiRel

CD4050BMJ//883

Teledyne HiRel

HEX NON-INVERTING BUFFER

CD4050BMW//883

Teledyne HiRel

HEX NON-INVERTING BUFFER

Venkel Ltd.

UPTF0603-16W-P-1650BT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;165R;�0.1%
RoHS : Compliant

UPTF1206-8W-N-1650BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;165R;�0.1%
RoHS : Compliant

UPTF1206-8W-N-3050BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;305R;�0.1%
RoHS : Compliant

UPTF1206-8W-N-7150BT

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;715R;�0.1%
RoHS : Compliant

UPTF1206-8W-P-5050BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;5PPM;505R;�0.1%
RoHS : Compliant

UPTF2010-2W-P-1150BT

VENKEL LTD

Ultra Precision Thin Film CR;2010;1/2W;�5PPM;115R;�0.1%
RoHS : Compliant

UPTF2512-2W-N-2550BT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�10PPM;255R;�0.1%
RoHS : Compliant

UPTF2512-2W-P-1450BT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�5PPM;145R;�0.1%
RoHS : Compliant

UPTF2512-2W-P-9650BT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�5PPM;965R;�0.1%
RoHS : Compliant

TFCR0402-16W-E-1450BT

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;145R;�0.1%
RoHS : Compliant

TFCR0402-16W-E-9650BT

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;965R;�0.1%
RoHS : Compliant

TFCR0603-10W-E-2050BT

VENKEL LTD

Thin Film CR;0603;1/10W;�25PPM;205R;�0.1%
RoHS : Compliant

TFCR0603-10W-K-1650BT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;165R;�0.1%
RoHS : Compliant

TFCR0603-10W-K-3050BT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;305R;�0.1%
RoHS : Compliant

TFCR0603-10W-K-6650BT

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;665R;�0.1%
RoHS : Compliant

Win Source Electronics

L5150BNTR

STMicroelectronics

IC REG LDO 5V 0.15A SOT223
RoHS : Compliant

805 : $0.3728
645 : $0.3879
500 : $0.4031
350 : $0.4334
225 : $0.4485
105 : $0.4788

32,190

HCPL-817-50BE

Broadcom Limited

OPTOISOLATOR 5KV TRANSISTOR 4SMD
RoHS : Compliant

2,025 : $0.1484
1,515 : $0.1655
1,170 : $0.1713
850 : $0.177
550 : $0.1827
225 : $0.2226

30,000

ACS758LCB-050B-PFF-T

Allegro MicroSystems LLC

Current Sensor Current Sensor AC/DC Current 5V Automotive 5-Pin Case CB-PFF Tube | SENSOR CURRENT HALL 50A AC/DC
RoHS : Compliant

70 : $4.2864
57 : $4.4607
44 : $4.6349
31 : $4.9834
20 : $5.1576
10 : $5.5061

22,522

STA350BWTR

STMicroelectronics

IC AUDIO SYSTEM DGTL 36PWRSSO
RoHS : Compliant

208 : $1.4457
156 : $1.6126
120 : $1.6682
88 : $1.7238
57 : $1.7794
24 : $2.1686

17,577

DEA252450BT-2027A1

TDK Corporation

FILTER BANDPASS 2.4GHZ WLAN SMD
RoHS : Compliant

3,245 : $0.0925
2,600 : $0.0963
2,000 : $0.1
1,395 : $0.1076
900 : $0.1113
425 : $0.1188

17,000

TLS850B0TEV33

Infineon Technologies AG

3.3V Positive Fixed TO-252-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators RoHS
RoHS : Compliant

325 : $0.9304
245 : $1.0377
190 : $1.0735
140 : $1.1093
90 : $1.145
40 : $1.3955

10,950

ADR4550BRZ-R7

Analog Devices Inc

IC VREF SERIES 0.02% 8SOIC / Ultralow Noise, High Accuracy
RoHS : Compliant

33 : $9.3182
26 : $9.697
20 : $10.0758
14 : $10.8334
9 : $11.2122
5 : $11.9697

3,690

TPS2HB50BQPWPRQ1

Texas Instruments

50 MOHM OTP B / Power Switch/Driver 2:1 N-Channel 18A 16-HTSSOP
RoHS : Compliant

204 : $1.4773
152 : $1.6478
118 : $1.7046
86 : $1.7614
55 : $1.8182
23 : $2.216

3,000

ADRF5050BCCZN

Analog Devices Inc

IC RF SWITCH SP4T 20GHZ 24LGA
RoHS : Compliant

5 : $70.9091
4 : $79.091
3 : $81.8182
2 : $84.5455
1 : $87.2728

2,500

HEF4050BT

Nexperia

HEX non-inverting buffers
RoHS : Compliant

860 : $0.3911
645 : $0.4362
500 : $0.4514
365 : $0.4664
235 : $0.4814
100 : $0.5867

2,500

PI7C8150BMAE

Diodes Incorporated

IC PCI-PCI BRIDGE ASYNC 208-FQFP / PCI Bridge Chip 66MHz 208-Pin FQFP
RoHS : Compliant

20 : $15.6391
15 : $17.4437
12 : $18.0452
9 : $18.6467
6 : $19.2482
3 : $23.4587

2,160

1N5350BRLG

onsemi

DIODE ZENER 13V 5W AXIAL
RoHS : Compliant

2,060 : $0.1459
1,540 : $0.1627
1,190 : $0.1683
865 : $0.1739
560 : $0.1795
230 : $0.2188

1,900

PEX8606-BA50BIG

Broadcom Limited

PEX8606-BA50BI G
RoHS : Compliant

1 : $364.394

630

PEX8608-BA50BC

PLX Technology

PCIe Gen2, 5.0 GT/s 8-lane 8-port PCI Express Switch

6 : $52.6587
5 : $58.7347
4 : $60.76
3 : $62.7854
2 : $64.8107
1 : $78.9881

272

AD9850BRS

Analog Devices Inc

IC DDS SYNTHESIZER CMOS 28-SSOP
RoHS : Not Compliant

16 : $18.8256
12 : $20.9978
10 : $21.7219
7 : $22.4459
5 : $23.17
2 : $28.2384

Wuhan P&S

SZMMSZ5250BT1G

onsemi

RoHS : Compliant

1 : $0.1126
100 : $0.0719
500 : $0.0593
1,000 : $0.0545

21,000

RS01062R50BE14

Vishay Intertechnologies

1 : $68.36
100 : $22.79
500 : $21.08
1,000 : $20.51

50BG-AB3-R nhà phân phối

Link URL