 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
502-35OC-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Pasternack Enterprises US | PE3C6250-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum Snap-On 4.3-10 Male to SMA Male Right Angle Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to SMA male right angle low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to SMA male right angle low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-RA-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and right angle TC-SPP250-SM-RA-LP SMA cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to right angle TC-SPP250-SM-RA-LP SMA cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-RA-LP SMA cable is a male to male coax assembly, PE3C6250-24, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to right angle TC-SPP250-SM-RA-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-SM-RA-LP SMA plug cable assembly PE3C6250-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to right angle TC-SPP250-SM-RA-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-SM-RA-LP SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6250-24 can also be used in the other direction and will be right angle TC-SPP250-SM-RA-LP SMA male to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-SM-RA-LP SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-SM-RA-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to SMA male right angle low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 74 | |
| PE3C6502-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 60 inches. Outdoor Rated 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 60 Inch Length Using SPO-375 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 60 inch length using SPO-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 60 inch length using SPO-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP375-716M-LP 7/16 DIN cable connection on one end and TC-SPP375-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable is a male to male coax assembly, PE3C6502-60, can also be known as a low PIM TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly PE3C6502-60 is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP375-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-SPP375-716M-LP 7/16 DIN male to TC-SPP375-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP375-716M-LP 7/16 DIN plug to TC-SPP375-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP375-716M-LP 7/16 DIN to TC-SPP375-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP375-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to 7/16 DIN male low PIM cable 60 inch length using SPO-375 coax using Times Microwave parts. |
| 60 | ||
| PE5020 | Pasternack Enterprises |
| 2 | |||
| PE82P5021 | Pasternack Enterprises | Key Specifications, Connector In Series: 2.92mm, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: 2.92mm, Connector Out Gender: Female, Maximum VSWR: 3.5:1, Maximum Insertion Loss: 16 dB, Maximum Power: 11 Watts. 6 Bit TTL Programmable Phase Shifter, 18 GHz to 26 GHz, 360 degree Phase Range, 11.25 degree Control Step Size, +20 dBm Max Pin, 2.92mm. Pasternack programmable phase shifter PE82P5021 is part of our large selection of in-stock RF, microwave and millimeter wave components available for purchase. This programmable phase shifter is manufactured with 2.92mm connectors and has a phase adjustment of 360 degrees. Our 2.92mm programmable phase shifter has a minimum frequency of 18 GHz and a maximum frequency of 26 GHz. 2.92mm coaxial RF programmable phase shifter has a maximum input power of 11 watts and a maximum VSWR of 3.5:1. PE82P5021 coaxial 2.92mm programmable phase shifter is one of over 40,000 RF components supplied by Pasternack. Our programmable phase shifter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 2 | ||
| PE3C5024/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to SMA Male Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX plug right angle to SMA male low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX plug right angle to SMA male low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a MCX cable connection on one end and a SMA cable connection on the other. Our low loss right angle a MCX to a SMA cable assembly has plug gender on end 1 and male on end 2. PE3C5024/HS can also be known as a low loss right angle MCX male to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5024/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX male to SMA plug cable assembly PE3C5024/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5024/HS can also be used in the other direction and will be SMA male to right angle MCX plug cable assembly if the opposite connectivity is required. Low loss MCX right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C6350-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 24 inches. Fire Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 24 Inch Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 4.3-10 female to 7/16 DIN male low PIM cable 24 inch length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 4.3-10 female to 7/16 DIN male low PIM cable 24 inch length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-SPP250-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable is a female to male coax assembly, PE3C6350-24, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-716M-LP 7/16 DIN plug cable assembly PE3C6350-24 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-SPP250-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6350-24 can also be used in the other direction and will be TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 female to 7/16 DIN male low PIM cable 24 inch length using SPF-250 coax using Times Microwave parts. |
| 0 | ||
| PE3W05022/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: D-Sub, Connector 1 Gender: Receptacle, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: D-Sub, Connector 2 Gender: Receptacle, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to D-Sub Receptacle Cable Using LMR-195 Coax with HeatShrink., Pasternack’s PE3W05022/BK/HS D-Sub receptacle to D-Sub receptacle RF cable assembly using LMR-195 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The D-Sub receptacle to D-Sub receptacle cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom D-Sub cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a D-Sub cable connection on one end and a D-Sub cable connection on the other. Our D-Sub to D-Sub cable assembly has a receptacle gender on end 1 and a receptacle on end 2. PE3W05022/BK/HS can also be known as a D-Sub receptacle to D-Sub receptacle cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05022/BK/HS RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. This PE3W05022/BK/HS D-Sub receptacle to D-Sub receptacle cable assembly is built with LMR-195, which is a flexible coax type. The Pasternack flexible D-Sub cable assembly is manufactured with D-Sub to D-Sub cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This D-Sub receptacle to D-Sub receptacle cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality D-Sub to D-Sub cable assembly for quick shipment worldwide. Variations of D-Sub cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal D-Sub to D-Sub RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W15027/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using TFT-5G-402 Coax with HeatShrink. PE3W15027/HS is a N male to SMA male cable using TFT-5G-402 coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15027/HS N male to SMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3W24502 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Female Bulkhead to MCX Plug Right Angle Cable Using RG223 Coax. PE3W24502 is a N female bulkhead to MCX plug right angle cable using RG223 coax. This Pasternack N female bulkhead to MCX plug right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MCX for connector 2. N to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24502 N female bulkhead to MCX plug right angle cable assembly is constructed with RG223 coax. | 0 | |||
| PE82P5022 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: SMA, Connector Out Gender: Female, Maximum VSWR: 2.5:1, Maximum Insertion Loss: 12 dB, Maximum Power: 30 Watts. 6 Bit TTL Programmable Phase Shifter, 6 GHz to 18 GHz, 360 degree Phase Range, 5.625 degree Control Step Size, SMA. Pasternack programmable phase shifter PE82P5022 is part of our large selection of in-stock RF, microwave and millimeter wave components available for purchase. This programmable phase shifter is manufactured with SMA connectors and has a phase adjustment of 360 degrees. Our SMA programmable phase shifter has a minimum frequency of 6 GHz and a maximum frequency of 18 GHz. SMA coaxial RF programmable phase shifter has a maximum input power of 30 watts and a maximum VSWR of 2.5:1. PE82P5022 coaxial SMA programmable phase shifter is one of over 40,000 RF components supplied by Pasternack. Our programmable phase shifter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 0 | ||
| PE3W05023/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SMA Male Right Angle Cable Using RG188-DS Coax with HeatShrink. PE3W05023/HS is a MMCX plug right angle to SMA male right angle cable using RG188-DS coax. This Pasternack MMCX plug right angle to SMA male right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05023/HS MMCX plug right angle to SMA male right angle cable assembly is constructed with RG188-DS coax. | 0 | |||
| PE3W08050-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SSMA Male to BNC Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SSMA male to BNC female bulkhead low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA male to BNC female bulkhead low loss cable 24 inch length using LMR-100 coax, SSMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SSMA cable connection on one end and BNC bulkhead cable connection on the other. Our low loss SSMA to BNC cable assemblies have a male gender on end 1 and female on end 2. PE3W08050-24 can also be known as a low loss SSMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SSMA plug to BNC jack cable assembly PE3W08050-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SSMA male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08050-24 can also be used in the other direction and will be BNC female bulkhead to SSMA male cable assembly if the opposite connectivity is required. Low loss SSMA plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMA to BNC cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMA male to BNC female bulkhead low loss cable 24 inch length using LMR-100 coax. |
| 0 | ||
| PE3W25023 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to Plug Cable Using RG174 Coax. PE3W25023 is a TNC male right angle to FAKRA plug cable using RG174 coax. This Pasternack TNC male right angle to FAKRA plug cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm FAKRA for connector 2. TNC right angle to FAKRA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25023 TNC male right angle to FAKRA plug cable assembly is constructed with RG174 coax. | 0 | |||
| PE33502-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 24 Inch Length Using RG402 Coax., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 24 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to SMA female 4 hole flange cable 24 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33502-24, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33502-24 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to SMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to SMA female 4 hole flange cable 24 inch length using RG402 coax. |
| 0 | ||
| PE35028-72 | Pasternack Enterprises |
| 0 | |||
 TE Connectivity | 36502AR47JTDG | TE Connectivity | 3650 0805 0.47uH 5% 2K RL Inductance: .47 µH Inductor Type: High Frequency Current Rating (Max): 220 mA DC Resistance: 1.7 Ω Package Size Code: 0805 0.47 µH High Frequency 220 mA 1.7 Ω | High Frequency & Rf Inductor | Part Number: 36502AR47JTDG | Internal Number: 6-1624113-1 | TE Connectivity RoHS : Compliant |
| 104,066 | |
| 350221-1 | TE Connectivity | 093 PIN REC 28-26 PTPPHBZ PCB Terminal Type: Receptacle Mating Pin Diameter: .093 in Mating Pin Diameter: 2.36 mm Compatible Insulation Diameter (Max): 1.45 mm Compatible Insulation Diameter (Max): .057 in Receptacle .093" 2.36 mm 1.45 mm | PCB Terminal | Part Number: 350221-1 | Internal Number: 350221-1 | .093" | TE Connectivity RoHS : Compliant |
| 15,021 | ||
| 350256RJT | TE Connectivity | 3502 56R 5% Resistance Value: 56 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Surface Mount Resistor | 56 Ω Thick Metal Film Power Resistor 5 % | Part Number: 350256RJT | Internal Number: 9-2176398-2 | TE Connectivity RoHS : Compliant |
| 5,796 | ||
| 35022K0FT | TE Connectivity | 3502 2K0 1% Resistance Value: 2K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 2K Ω Thick Metal Film Power Resistor 1 % | Part Number: 35022K0FT | Internal Number: 8-2176397-0 | TE Connectivity RoHS : Compliant |
| 3,868 | ||
| 350282RJT | TE Connectivity | 3502 82R 5% Resistance Value: 82 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Surface Mount Resistor | 82 Ω Thick Metal Film Power Resistor 5 % | Part Number: 350282RJT | Internal Number: 9-2176398-4 | TE Connectivity RoHS : Compliant |
| 3,780 | ||
| 36502A8N7JTDG | TE Connectivity | 3650 0805 8.7nH 5% 2K RL Inductance: .0087 µH Inductor Type: High Frequency Current Rating (Max): 400 mA DC Resistance: .21 Ω Package Size Code: 0805 0.0087 µH High Frequency 400 mA .21 Ω | High Frequency & Rf Inductor | Part Number: 36502A8N7JTDG | Internal Number: 2-1624113-8 | TE Connectivity RoHS : Compliant |
| 3,639 | ||
| 35021M8FT | TE Connectivity | 3502 1M8 1% Resistance Value: 1.8M Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 1.8M Ω Thick Metal Film Power Resistor 1 % | Part Number: 35021M8FT | Internal Number: 5-2176398-2 | TE Connectivity RoHS : Compliant |
| 3,452 | ||
| 36502C4R7JTDG | TE Connectivity | 3650 1008 4.7uH 5% 2K RL Inductance: 4.7 µH Inductor Type: High Frequency Current Rating (Max): 260 mA DC Resistance: 4 Ω Package Size Code: 1008 High Frequency & Rf Inductor | 4.7 µH High Frequency 260 mA 4 Ω | Part Number: 36502C4R7JTDG | Internal Number: 4-1879023-4 | TE Connectivity RoHS : Compliant |
| 2,991 | ||
| 350256KFT | TE Connectivity | 3502 56K 1% Resistance Value: 56K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 56K Ω Thick Metal Film Power Resistor 1 % | Part Number: 350256KFT | Internal Number: 1-2176398-6 | TE Connectivity RoHS : Compliant |
| 2,785 | ||
| 35021R3FT | TE Connectivity | 3502 1R3 1% Resistance Value: 1.3 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 1.3 Ω Thick Metal Film Power Resistor 1 % | Part Number: 35021R3FT | Internal Number: 2176397-4 | TE Connectivity RoHS : Compliant |
| 2,328 | ||
| 36502AR10JTDG | TE Connectivity | 3650 0805 0.10uH 5% 2K RL Inductance: .1 µH Inductor Type: High Frequency Current Rating (Max): 400 mA DC Resistance: .46 Ω Package Size Code: 0805 0.1 µH High Frequency 400 mA .46 Ω | High Frequency & Rf Inductor | Part Number: 36502AR10JTDG | Internal Number: 4-1624113-6 | TE Connectivity RoHS : Compliant |
| 1,998 | ||
| 3502220RFT | TE Connectivity | 3502 220R 1% Resistance Value: 220 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 220 Ω Thick Metal Film Power Resistor 1 % | Part Number: 3502220RFT | Internal Number: 5-2176397-7 | TE Connectivity RoHS : Compliant |
| 1,630 | ||
| 3502110KFT | TE Connectivity | 3502 110K 1% Resistance Value: 110K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 110K Ω Thick Metal Film Power Resistor 1 % | Part Number: 3502110KFT | Internal Number: 2-2176398-3 | TE Connectivity RoHS : Compliant |
| 1,466 | ||
| SQBW502K7J | TE Connectivity | SQB50 2K7 (WIRE) 5% FASTON Resistance Value: 2.7K Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 50 W Through-Hole Resistor | 2.7K Ω Wire Wound Power Resistor 5 % | Part Number: SQBW502K7J | Internal Number: 8-2176631-3 | TE Connectivity RoHS : Compliant |
| 1,080 | ||
| 350275KFT | TE Connectivity | 3502 75K 1% Resistance Value: 75K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 75K Ω Thick Metal Film Power Resistor 1 % | Part Number: 350275KFT | Internal Number: 1-2176398-9 | TE Connectivity RoHS : Compliant |
| 711 | ||
 Teledyne HiRel | 5962-8680502XA | Teledyne HiRel | PROM, UV ERASABLE, 64K X 16, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
5962-9071502MYA | Teledyne HiRel | FIFO MEMORY, 4K X 9, 80 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8751502KA | Teledyne HiRel | PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8981502LA | Teledyne HiRel | PROM, UV ERASABLE, 2K X 8, REGISTERED, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-89755023A | Teledyne HiRel | PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT AND-OR RoHS : Not Compliant | 0 | |||
| 5962-9215502MXA | Teledyne HiRel | PROM, 32K X 8, REGISTERED, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-9450202QXA | Teledyne HiRel | BUS TRANSCEIVER/REGISTER, 16-BIT, W/3-STATE OUTPUTS, TTL COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9215502MZA | Teledyne HiRel | PROM, 32K X 8, REGISTERED, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9158502MYA | Teledyne HiRel | FIFO MEMORY, 1K X 9 PARALLEL, 80 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-9154502MXA | Teledyne HiRel | LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-90555023A | Teledyne HiRel | PROG. LOGIC DEVICE, ASYNCHRONOUS, 25 NS RoHS : Not Compliant | 0 | |||
| 5962-8975502LA | Teledyne HiRel | PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT AND-OR RoHS : Not Compliant | 0 | |||
| 5962-88735023A | Teledyne HiRel | PROM, ONE TIME, 2K X 8, REGISTERED, 35 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-9154502MYA | Teledyne HiRel | LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9071502MZA | Teledyne HiRel | FIFO MEMORY, 4K X 9, 80 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | SAFC1812C0G502-181JNE | VENKEL LTD | Safety Cap;1812;C0G;X1/Y2;180pF;�5% RoHS : Compliant | 0 | ||
| SAFC2208C0G502-181JNE | VENKEL LTD | Safety Cap;2208;C0G;X1/Y2;180pF;�5% RoHS : Compliant | 0 | |||
| SAFC2211C0G502-561JNE | VENKEL LTD | Safety Cap;2211;C0G;X1/Y2;560pF;�5% RoHS : Compliant | 0 | |||
| PWCR0402-AK-1502DT | VENKEL LTD | Pulse Withstanding CR;0402;1/5W;�100PPM;15K;�0.5% RoHS : Compliant | 0 | |||
| PWCR0805-VK-7502FT | VENKEL LTD | Pulse Withstanding CR;0805;1/2W;�100PPM;75K;�1% RoHS : Compliant | 0 | |||
| PWCR1206-VK-1502FT | VENKEL LTD | Pulse Withstanding CR;1206;1/2W;�100PPM;15K;�1% RoHS : Compliant | 0 | |||
| PWCR2010-XK-7502FT | VENKEL LTD | Pulse Withstanding CR;2010;1W;�100PPM;75K;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-1502CT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;15K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-7502BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;75K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-7502CT | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;75K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-7502FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;75K;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-1502FT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;15K;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-K-7502DT | VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;75K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-1502CT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;15K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-7502FT | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;75K;�1% RoHS : Compliant | 0 | |||
 Win Source Electronics | 43025-0200 | Molex | CONN RECEPT 2POS 3MM VERT DUAL RoHS : Compliant |
| 90,000 | |
| 5023520200 | Molex | CONN HEADER SMD R/A 2POS 2MM |
| 67,200 | ||
| 22-03-5025 | Molex | Headers & Wire Housings 2.5 VERT HDR SPOX 2P shrouded RoHS : Compliant |
| 40,000 | ||
| LP38502TSX-ADJ | National Semiconductor Corporation | 1.5A FlexCap Low Dropout Linear Regulator for 2.7V to 5.5V Inputs RoHS : Not Compliant |
| 30,360 | ||
| 3314J-1-502E/TS4YJ502 | Bourns Inc |
| 11,919 | |||
LM5021MMX-2/NOPB | Texas Instruments | IC PWM CTLR AC-DC CURR 8VSSOP / AC to DC Switching Converter Flyback 560kHz T/R 8-Pin VSSOP RoHS : Compliant |
| 10,500 | ||
TPS65021RHAR | Texas Instruments | POWER MANAGEMENT IC FOR LI-ION POWERED SYSTEMS | IC PWR MGMT FOR LI-ION SYS 40QFN RoHS : Compliant |
| 10,254 | ||
| LP38502ASD-ADJ/LP38502ASDX-ADJ | Texas Instruments |
| 9,299 | |||
| LMZ20502SILR/LMZ20502SILT | Texas Instruments |
| 9,160 | |||
| 5025983393 | Molex | CONN FPC 33POS 0.3MM R/A RoHS : Compliant |
| 6,118 | ||
| 3266X-1-502LF | Bourns Inc | TRIMMER 5K OHM 0.25W PC PIN SIDE RoHS : Compliant |
| 5,000 | ||
| MBI5026GF | Macroblock Inc | RoHS : Compliant |
| 4,607 | ||
CY7C53150-20AXI | Cypress Semiconductor | IC PROCESSOR NEURON 64LQFP RoHS : Compliant |
| 3,000 | ||
XC6SLX150-2FGG484C | AMD Xilinx | IC FPGA 338 I/O 484FBGA RoHS : Compliant |
| 600 | ||
| CN5020-400BG564-SCP | Cavium Networks | Embedded Processor 564-Pin HSBGA |
| 400 | ||
 Wuhan P&S | MJ15025G | onsemi | Silicon Power Transistors RoHS : Compliant |
| 7,400 | |
| 10145028-030LF | Amphenol FCi | Wire-to-board connector, socket, 30 positions, left and right double row |
| 5,000 | ||
| NTCS0805E3502JLT | Vishay Intertechnologies | NTC thermistor 5k 0805 (2012 metric) RoHS : Compliant |
| 4,000 | ||
| UJ4C075023B7S | onsemi | Silicon Carbide (SiC) Cascode JFET RoHS : Compliant |
| 2,400 | ||
| 10025026-10002TLF | Amphenol FCi | PCI Express : x8 Straddle-Mount Card Edge Connector, 98 Positions, 1 mm (0.039 in.) P RoHS : Compliant |
| 1,200 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand