 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
4BL-AB-P08-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 TME | MMBZ5234BLT1G | onsemi | Diode: Zener; 0.3W; 6.2V; SMD; SOT23; single diode; reel,tape RoHS : Compliant |
| 1,808 | |
| R8-104-BLACK | SCI | Laboratory connector: 4mm banana; plug; 10A; 60VDC; black; 58.5mm |
| 562 | ||
| RPI OFFICIAL CASE FOR PI4 (BLACK/GREY) | Raspberry Pi | Case; black,grey; ABS; Raspberry Pi 4 |
| 242 | ||
| OPL.04-BL | 4Carmedia | Braid; polyester; blue; Package: 100m; ØBraid : 3÷7nom.4mm |
| 159 | ||
| 1854 BL005 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 24AWG; PVC; blue; 600V; 30.5m |
| 1 | ||
| 7134 BL005 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 16AWG; PVC; blue; 300V; 30.5m |
| 1 | ||
| 3254 BL001 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 16AWG; PVC; blue; 300V; 305m |
| 0 | ||
| AT13-6P2-BM04BLU | Amphenol Corporation | Connector: automotive; Automotive RoHS : Compliant |
| 0 | ||
| AX 4B LR | ReeR spa | Safety light grid; H: 900mm; 60m; AX LR; 24VDC; 0÷55°C |
| 0 | ||
| D4BL-4DRA | OMRON Corporation | Safety switch: bolting; D4BL; NC x2; IP67; Electr.connect: M20 RoHS : Compliant |
| 0 | ||
| D4BL-4DRA-A | OMRON Corporation | Safety switch: bolting; D4BL; NC x2; IP67; Electr.connect: M20 RoHS : Compliant |
| 0 | ||
| D4N-4BLE | OMRON Corporation | Limit switch; roller lever; 10A; max.240VAC; max.250VDC; M20; IP67 RoHS : Compliant |
| 0 | ||
| GN 111.3-14-A4-BL | Elesa+Ganter | Protective ring; A4 stainless steel; safety pin; 14mm |
| 0 | ||
| IS43TR81024BL-125KBLI | Integrated Silicon Solution Inc | IC: DRAM memory; 8GbDRAM; 1Gx8bit; 933MHz; 13.75ns; TWBGA78 RoHS : Compliant |
| 0 | ||
| EP-DOP-SZ24-BL-B | TE Connectivity | Stopper; polyamide; black; Entrelec; Ø: 20.4mm; Size: 24; L: 15.5mm |
| 0 | ||
 Avnet Americas | MMBZ5234BLT1G | onsemi | - Tape and Reel (Alt: MMBZ5234BLT1G) RoHS : Compliant |
| 63,000 | |
| IS35ML01G084-BLA2-TR | Integrated Silicon Solution Inc | IS35ML01G084-BLA2-TR - Tape and Reel (Alt: IS35ML01G084-BLA2-TR) RoHS : Not Compliant | 30,000 | |||
| MMBZ5244BLT1G | onsemi | - Tape and Reel (Alt: MMBZ5244BLT1G) RoHS : Compliant |
| 27,000 | ||
| 72309-8034BLF | Amphenol Corporation | - Rail/Tube (Alt: 72309-8034BLF) RoHS : Compliant |
| 2,908 | ||
| 72309-8014BLF | Amphenol Corporation | - Rail/Tube (Alt: 72309-8014BLF) RoHS : Compliant |
| 1,609 | ||
| 72309-8044BLF | Amphenol Corporation | - Rail/Tube (Alt: 72309-8044BLF) RoHS : Compliant |
| 365 | ||
| PWBTL4BL | Panduit Corp | Tray Liner for 4Inch Width Wire Basket Cable Tray Routing System Steel Black - Bulk (Alt: PWBTL4BL) RoHS : Not Compliant |
| 0 | ||
| RHER4BL | Panduit Corp | - Bulk (Alt: RHER4BL) RoHS : Compliant |
| 0 | ||
| LCC4-14B-L | Panduit Corp | - Bulk (Alt: LCC4-14B-L) RoHS : Compliant |
| 0 | ||
| 10121505-080004BLF | Amphenol Corporation | Connector High Power Card Edge Receptacle 8PowerPOS/4SignalPOS 2.54mm/1.27mm Press Fit Straight Through Hole - Trays (Alt: 10121505-080004BLF) RoHS : Compliant |
| 0 | ||
| 10127905-B04B24BLF | Amphenol Corporation | - Trays (Alt: 10127905-B04B24BLF) RoHS : Compliant |
| 0 | ||
| AB-DD14BL-DDBL-QD001 | Amphenol Corporation | - Trays (Alt: AB-DD14BL-DDBL-QD001) RoHS : Compliant |
| 0 | ||
| CFG4BL | Panduit Corp | - Bulk (Alt: CFG4BL) RoHS : Compliant |
| 0 | ||
| ZL30734BLDG1 | Microchip Technology Inc | 4-CHANNEL, 10-OUTPUT ENHANCED 1588 TIMING CARD - Trays (Alt: ZL30734BLDG1) RoHS : Not Compliant |
| 0 | ||
| DSC1124BL2-100.0000T | Microchip Technology Inc | MEMS OSC, HCSL, 100MHz, 25PPM, 2.5-3.3V, -40 to 105C, 5.0x3.2mm - Tape and Reel (Alt: DSC1124BL2-100.0000T) RoHS : Not Compliant |
| 0 | ||
 Newark | 10129378-903004BLF | Amphenol Communications Solutions | Conn, Hdr, 3Pos, 1Row, 2.54Mm, Th; Connector Systems:Board-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:1Rows; No. Of Contacts:3Contacts; Contact Termination Type:Through Hole Straight; Product Range:Econostik 10129378 Series Rohs Compliant: Yes RoHS : Compliant |
| 12,253 | |
| 10129379-909004BLF | Amphenol Communications Solutions | Conn, R/A Header, 9Pos, 1Row, 2.54Mm, Th; |Amphenol Communications Solutions 10129379-909004BLF RoHS : Compliant |
| 2,582 | ||
| 10129379-910004BLF | Amphenol Communications Solutions | Btb Conn, Header, 10Pos, 1Row, 2.54Mm; Connector Systems:Board-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:1Rows; No. Of Contacts:10Contacts; Contact Termination Type:Through Hole Right Angle; Product Range:Fci Econostik Series Rohs Compliant: Yes RoHS : Compliant |
| 2,432 | ||
| 70524BLF | Amphenol Communications Solutions | Dust Cover, Pp, Black, 15Pos D-Sub Conn; Accessory Type:Dust Cap; For Use With:15 Position D-Sub Receptacle Connectors; Connector Body Material:Pp (Polypropylene) Body; Product Range:- Rohs Compliant: Yes |Amphenol Communications Solutions 70524BLF RoHS : Compliant |
| 636 | ||
| BIM2004/14-BLK/BLK | CamdenBoss Ltd | Enclosure Plast, Pcb Box, Abs, 40.01Mm; |Camdenboss BIM2004/14-BLK/BLK RoHS : Compliant |
| 374 | ||
| CV150K14BL1 | Bourns Inc | Varistor, Mov, 395V, Disc 14Mm; |Bourns, Inc. CV150K14BL1 RoHS : Compliant |
| 144 | ||
| D4BL-K2 | OMRON Scientific Technologies Inc | Safety Interlock Switch; For Use With:Om |Omron Sti D4BL-K2 RoHS : Compliant |
| 92 | ||
| PRB06E24-BLS(LC)(C) | Amphenol Industrial Operations | Industrial Cir Conn, Plug, 5Pos, Cable; Product Range:Amphe-Prb Series; Circular Connector Shell Style:Straight Plug; No. Of Contacts:5Contacts; Circular Contact Type:Crimp Socket - Contacts Not Supplied; Contact Plating:Gold, Silverrohs Compliant: Yes RoHS : Compliant |
| 92 | ||
| TRD824-BLU-7F | L-com Inc | Enet Cord, Cat8, Rj45 Plug-Plug, 7Ft; |L-Com TRD824-BLU-7F RoHS : Compliant |
| 79 | ||
| FOA-824-BLK | L-com Inc | Fiber Optic Adapter, Black, Mpo Duplex; |L-Com FOA-824-BLK RoHS : Compliant |
| 74 | ||
| TRD695RA4BL-2 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695RA4BL-2 RoHS : Compliant |
| 42 | ||
| AT44 BLACK 33M X 50MM | Advance Tapes International Ltd | Protective Film Tape, Pvc, 33M X 50Mm; |Advance Tapes AT44 BLACK 33M X 50MM RoHS : Compliant |
| 42 | ||
| D4BL-2DRG | OMRON Scientific Technologies Inc | Safety Interl Sw, 115V, 3Pst-Nc, Screw; |Omron Sti D4BL-2DRG RoHS : Compliant |
| 12 | ||
| SL4-BL120-G | Eaton Cutler-Hammer | Module, Sl4 Sgnl Towers, Green, Flashing; |Eaton Cutler Hammer SL4-BL120-G RoHS : Not Compliant |
| 7 | ||
| FMCA2604/BL-120 | Fairview Microwave Inc | Cbl Assy, Hd Bnc Plug-Plug, 75 Ohm, 120"; |Fairview Microwave FMCA2604/BL-120 RoHS : Not Compliant |
| 1 | ||
 Analog Devices Inc | HMC7044BLP10BE | Analog Devices Inc | 3.2GHz, 14-Output Jitter Atten RoHS : Compliant |
| 0 | |
| EK1HMC7044BLP10B | Analog Devices Inc | HMC7044B Evaluation Kit RoHS : Compliant |
| 0 | ||
| HMC7044BLP10BETR | Analog Devices Inc | 3.2GHz, 14-Output Jitter Atten RoHS : Compliant |
| 0 | ||
 RS | B2 3/64 BLUE 4FT (106-10011) | SUMITOMO ELECTRIC Interconnect Products | HEAT SHRINK TUBING;FLEX POLYOLEFIN; 3/64; 2:1; +135C; BLU; 4FT LENGTHS |
| 1,532 | |
| D4BL-K1 (D4BLK1) | OMRON Industrial Automation | KEY, OPERATION, HORIZONTAL, 3 A, 250 V, 78.7 MM, 300 VAC, 50 MILLIOHMS (MAX.) |
| 41 | ||
| D4BL-K2 (D4BLK2) | OMRON Industrial Automation | KEY, OPERATION, VERTICAL, 3 A, 250 V, 53.7 MM, 300 VAC, 50 MILLIOHMS (MAX.) |
| 10 | ||
| D4BL-K3 (D4BLK3) | OMRON Industrial Automation | KEY, OPERATION, ADJUSTABLE (HORIZONTAL), 3 A, 250 V, 80.7 MM, 300 VAC, IP67 |
| 4 | ||
| 50737 (KEL-DPZ 25/4 BLACK) | icotek Corporation | MULTI-MEMBRANE CABLE ENTRY PLATES, ROUND, KEL-DPZ 25/4 BLACK |
| 4 | ||
| ZB4BL3 | Schneider Electric | GREEN PUSH BUTTON HEAD, SPRING RETURN, 22MM CUTOUT, ELECTRIC XB4 SERIES RoHS : Compliant |
| 3 | ||
| D4BL-2CRA (D4BL2CRA) | OMRON Industrial Automation | MECHANICAL LOCKING INTERLOCK SWITCH, KEY/TONGUE, 1NC 1NO+1NC, D4BL SERIES |
| 3 | ||
| D4BL-2DRA (D4BL2DRA) | OMRON Industrial Automation | MECHANICAL INTERLOCK SWITCH, 24 VDC, 2NC + 1NC, IP67, DB4L SERIES |
| 3 | ||
| D4BL-2DRG (D4BL2DRG) | OMRON Industrial Automation | SOLENOID INTERLOCK SWITCH, 24 VDC, 2NC + 1NC, IP67, DB4L SERIES |
| 3 | ||
| D4BL-1CRA (D4BL1CRA) | OMRON Industrial Automation | D4BL SOLENOID INTERLOCK SWITCH POWER TO UNLOCK 24 V DC |
| 2 | ||
| D4BL-4CRA-NPT (D4BL4CRANPT) | OMRON Industrial Automation | MECHANICAL LOCKING INTERLOCK SWITCH, KEY/TONGUE, 1NO+1NC 1NC, 3A, D4BL SERIES |
| 2 | ||
| XPF 1 3/4" BLACK (XPF 1 3/4" BLACK) | Ico-Rally | SLEEVING, EXPANDABLE, ABRASION RESISTANT, FLAME RETARDANT, BLK POLYESTER |
| 2 | ||
| 100004BL (100004BL-C) | Platinum Tools | EZ-RJ45 REPLACEMENT TRIMMING BLADE CAVITY SET, 2 PACK |
| 1 | ||
| HIX 3/4 BLACK (HIX 3/4 BLACK) | Ico-Rally | TUBING, HEAT SHRINK, ABRASION, SOLVENT RESISTANT, BLK POLYOLEFIN, 4FT. L |
| 1 | ||
| HIX 1/4 BLACK UL (HIX 1/4 BLACK UL) | Ico-Rally | TUBING, HEAT SHRINK, ABRASION, SOLVENT RESISTANT, BLK POLYOLEFIN, 4FT. L |
| 1 | ||
 Microchip Technology Inc | ZL40294BLDG6 | Microchip Technology Inc | DB2000QL, 20 Output Buffer, PCIe Gen1-7, LP-HCSL, VGQFN, Projected EOL: 2051-02-18 RoHS : Compliant |
| 14,700 | |
| APT20M34BLLG | Microchip Technology Inc | MOSFET MOS 7 200 V 34 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 627 | ||
| APT5014BLLG | Microchip Technology Inc | MOSFET MOS 7 500 V 140 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 143 | ||
| APT5024BLLG | Microchip Technology Inc | MOSFET MOS 7 500 V 240 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| ZL30734BLDG1 | Microchip Technology Inc | 4-channel, 10-output enhanced 1588 timing card, VQFN, Projected EOL: 2050-10-24 RoHS : Compliant |
| 0 | ||
| ZL40294BLDX6 | Microchip Technology Inc | DB2000QL, 20 Output Buffer, PCIe Gen1-7, LP-HCSL, VGQFN, Projected EOL: 2051-02-18 RoHS : Compliant |
| 0 | ||
| APT1201R4BLLG | Microchip Technology Inc | MOSFET MOS 7 1200 V 1.4 Ohm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| DSC1224BL2-156M2500 | Microchip Technology Inc | MEMS OSC, HCSL, 156.25MHz, 25ppm, 2.5-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2051-02-12 RoHS : Compliant |
| 0 | ||
| DSC1204BL3-122M8800 | Microchip Technology Inc | MEMS OSC, HCSL, 122.88MHz, 20PPM, 2.5-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2046-04-16 RoHS : Compliant |
| 0 | ||
| DSC1124BL3-100.0000 | Microchip Technology Inc | MEMS Osc., Low Jitter, 100MHz, HCSL, -40-105C, 20ppm, 5x3.2mm, VDFN, Projected EOL: 2051-09-05 RoHS : Compliant |
| 0 | ||
| DSC1124BL1-100.0000 | Microchip Technology Inc | MEMS OSC, HCSL, 100MHz, 50PPM, 2.5-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2046-08-18 RoHS : Compliant |
| 0 | ||
| DSC1124BL2-100.0000T | Microchip Technology Inc | MEMS OSC, HCSL, 100MHz, 25PPM, 2.5-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2051-04-20 RoHS : Compliant |
| 0 | ||
| DSC1124BL1-100.0000T | Microchip Technology Inc | MEMS OSC, HCSL, 100MHz, 50PPM, 2.5-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2046-08-18 RoHS : Compliant |
| 0 | ||
| DSC1204BL3-122M8800T | Microchip Technology Inc | MEMS OSC, HCSL, 122.88MHz, 20PPM, 2.5-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2046-04-16 RoHS : Compliant |
| 0 | ||
| DSA1124BL2-100.0000TVAO | Microchip Technology Inc | MEMS OSC, AUTO, HCSL, 100MHz, 25ppm, 2.5-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2051-10-03 RoHS : Compliant |
| 0 | ||
 Bisco Industries | CEC-24 BLACK | Caplugs | 2,701 | |||
| CCF-1-1/4-10-14 BLACK | Caplugs | 820 | ||||
| 1635F 3/4" BLACK SP | Dunbar | 600 | ||||
| DS-31Q4 BLACK | Caplugs | 514 | ||||
| FP-164 BLACK | Caplugs | 300 | ||||
| S71-3-L-4-BLSM | Birtcher Products | 210 | ||||
| M16878/4-BLE-0 | MIL-SPEC Wire Cable Tubing Sleeve | 100 | ||||
| CL4-BLPT-0.75-S | Carr Lane Manufacturing Co Inc | 96 | ||||
| S71-2-L-4-BLSM | Birtcher Products | 47 | ||||
| S71-2-R-4-BLSM | Birtcher Products | 30 | ||||
| CL-4-BLPT-1.00-S | Carr Lane Manufacturing Co Inc | 8 | ||||
| CE-324 BLACK | Caplugs | 4 | ||||
| 42-4-B-LF-LN-S-L | Birtcher Products | 4 | ||||
| FP-301 1/4 BL 200 | 3M Interconnect | 2 | ||||
| FIT-221-3/64 BL103 | Alpha Wire | 1 | ||||
 Rochester Electronics | MMBZ5234BLT1G | onsemi | Zener Diode Single 6.2V 225mW SOT-23-3 T/R RoHS : Compliant |
| 192,500 | |
| SZMMBZ5234BLT1G | onsemi | Zener Diode Single 6.2V 225mW SOT-23-3 T/R RoHS : Compliant |
| 507,000 | ||
| MMBZ5254BLT1G | onsemi | Zener Diode Single 27V 225mW SOT-23-3 T/R RoHS : Compliant |
| 919,843 | ||
| MMBZ5244BLT1G | onsemi | Zener Diode Single 14V 225mW SOT-23-3 T/R RoHS : Compliant |
| 10,750 | ||
TL16PC564BLVPZ | Texas Instruments | Serial I/O Controller, 1 Channel(s), 0.0140380859375MBps, CMOS, PQFP100 RoHS : Compliant |
| 2,160 | ||
| TL16PC564BLVIPZ | Texas Instruments | Serial I/O Controller, 1 Channel(s), 0.0140380859375MBps, PQFP100 RoHS : Compliant |
| 28,276 | ||
JM38510/50504BLA | Texas Instruments | OT PLD, 25ns, TTL, CDIP24 RoHS : Not Compliant |
| 672 | ||
| LM2794BL | National Semiconductor Corporation | Display Driver RoHS : Not Compliant |
| 12 | ||
| HZ4BLLTD-E | Renesas Electronics Corporation | Zener Diode, 0.25W, Silicon, Unidirectional, DO-35 RoHS : Compliant |
| 8,090 | ||
HZS4BLLRX-E | Renesas Electronics Corporation | Zener Diode, 0.25W, Silicon, Unidirectional, DO-34 RoHS : Compliant |
| 13,505 | ||
| HZU4BLL-JTRF | Renesas Electronics Corporation | Epitaxial Planar Zener Diode for Hard Knee Low Noise RoHS : Compliant |
| 9,000 | ||
| HZU4BLLTRF-E | Renesas Electronics Corporation | Zener Diode, 3.9V V(Z), 0.15W, Silicon, Unidirectional RoHS : Compliant |
| 2,800 | ||
| M51944BL#TF0J | Renesas Electronics Corporation | Voltage Detecting, System Resetting IC RoHS : Compliant |
| 8,004 | ||
| TLP293(V4-BLTR,E(T | Toshiba America Electronic Components | TLP293 - Photocoupler (phototransistor output) |
| 10,000 | ||
| TLP781F(D4BL-TP7,F | Toshiba America Electronic Components | TLP781F - Photocoupler (phototransistor output) RoHS : Compliant |
| 38,000 | ||
 Sager | PWBTL4BL | Panduit Corp | Wire Ducting & Raceways TRAY LINER 4, BL, PANDUIT WIRE BASKET, |
| 0 | |
| RHER4BL | Panduit Corp | Printers Ribbon Resin for use with TDP4HE Seri |
| 0 | ||
| LCC4-14B-L | Panduit Corp | Terminals Copp Comp Lug 2H #4 - #3 AWG ST RoHS : Compliant |
| 0 | ||
| CFG4BL | Panduit Corp | Wire Ducting & Raceways GFCI Frame 4 Port Black |
| 0 | ||
| UTP6A34BL | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A, Black UTP Cab RoHS : Compliant | 0 | |||
| LCDX8-14B-L | Panduit Corp | Terminals Copp Comp Lug 2H #8 AWG Flex 1 RoHS : Compliant |
| 0 | ||
| FD1W24BLDSC | Panduit Corp | Wire Ducting & Raceways Opticom Pre-loaded fibre drawer with 24 | 0 | |||
| FRTR4X4BL | Panduit Corp | Wire Ducting & Raceways 4X4 FIBER RUNNER TRUMPET | 0 | |||
| PSM7004BL-KED | Panduit Corp | Multi-Conductor Cables Copper Cable, Cat 7, 4-Pair, 23 AWG stra | 0 | |||
| PUO6X04BL-CEG | Panduit Corp | Multi-Conductor Cables Copper Cable, Category 6A, 4-pair, 23AWG |
| 0 | ||
| PUP6C2204BL-WZ | Panduit Corp | COPPER CABLE, EXTENDED REACH, CAT 6, 4-P |
| 0 | ||
| PKCS34/BL/50M | ABB Group | Conduit Fittings & Accessories | 0 | |||
| PPS0204BLMRC-L | Panduit Corp | SOLAR LABEL, 2.00 H X 4.00 W, MAX RATE |
| 0 | ||
| PUP6004BL-W | Panduit Corp | Multi-Conductor Cables Copper Cable, Enhanced Cat 6, 4-Pair, 23 | 0 | |||
| PUR6004BL-WZ | Panduit Corp | COPPER CABLE, ENHANCED, CAT6, 4-PAIR, 23AWG, U/UTP, CMR, BLACK, 1000FT/305M |
| 0 | ||
 Ameya Holding Limited | MMBZ5244BLT1G | onsemi | MMBZ5244BL Series 225 mW 10 mA 14 V SMT Zener Voltage Regulator - SOT-23-3 RoHS : Compliant | 21,100 | ||
| IS34ML01G084-BLI | Integrated Silicon Solution Inc | IC: FLASH memory; parallel 8bit; VFBGA63; parallel RoHS : Compliant | 24 | |||
 ComSIT USA | FIT22114BLACK | Alpha Wire | AVAILABLE EU | 63,586 | ||
| 6714BL | Alpha Wire | AVAILABLE EU | 41,250 | |||
ComSIT USA | SZMMBZ5234BLT3G | onsemi | Zener Voltage Regulator Zener Diode, 6.2V V(Z), 5%, 0.225W, Silicon, Unidirectional, TO-236 RoHS : Compliant | 60,000 | ||
| CV550K14BL1 | Bourns Inc | Varistor, 264J, Through Hole Mount RoHS : Not Compliant | 9,300 | |||
| TLP781D4BLF | Toshiba America Electronic Components | Photocoupler IRED And Photo-Transistor Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 5,200 | |||
| HM6264BLFPI10T | Hitachi Ltd | 64 K SRAM (8-KWORD X 8-BIT) Standard SRAM, 8KX8, 100ns, CMOS, PDSO28 RoHS : Not Compliant | 5,000 | |||
| HSMP3894BLKG | Avago Technologies | SURFACE MOUNT RF PIN SWITCH DIODE Pin Diode, 100V V(BR), Silicon RoHS : Compliant | 3,100 | |||
| KM6264BLS10L | Samsung Semiconductor | 8K X 8 STANDARD SRAM Standard SRAM, 8KX8, 100ns, CMOS, PDIP28 RoHS : Not Compliant | 2,214 | |||
| MMBZ5234BLT1G | onsemi | 225 MILLI WATT SOT-23 SURFACE MOUNT ZENER VOLTAGE REGULATOR Zener Diode, 6.2V V(Z), 5%, 0.225W, Silicon, Unidirectional, TO-236AB RoHS : Compliant | 2,040 | |||
| KM6264BLG10 | Samsung Semiconductor | 8K X 8 STANDARD SRAM Standard SRAM, 8KX8, 100ns, CMOS, PDSO28 RoHS : Not Compliant | 782 | |||
| 723098034BLF | Amphenol FCi | UNIV. SERIAL BUS DOUBLE DECK RECEPTACLE USB Connector, 4+4 Contact(s), Female, Right Angle, Solder Terminal, Locking, Receptacle RoHS : Compliant | 531 | |||
| HSMP3814BLKG | Avago Technologies | SURFACE MOUNT RF PIN LOW DISTORTION ATTENUATOR DIODE Pin Diode, 100V V(BR), Silicon RoHS : Compliant | 400 | |||
| LM2794BL | National Semiconductor Corporation | CURRENT REGULATED SWITCHED CAPACITOR LED SUPPLY WITH ANALOG AND PWM BRIGHTNESS CONTROL Switched Capacitor Regulator, 675kHz Switching Freq-Max, CMOS, PBGA14 RoHS : Not Compliant | 250 | |||
| MGA725M4BLK | Avago Technologies | LOW NOISE AMPLIFIER WITH BYPASS SWITCH IN MINIATURE LEADLESS PACKAGE Wide Band Low Power Amplifier, 100MHz Min, 6000MHz Max, 1 Func, GAAS RoHS : Compliant | 200 | |||
| HM6264BLP10L | Hitachi Ltd | 64 K SRAM (8-KWORD X 8-BIT) Standard SRAM, 8KX8, 100ns, CMOS, PDIP28 RoHS : Not Compliant | 21 | |||
| KAL01514BLFGFG | keetouch | Electronic Component RoHS : Not Compliant | 4 | |||
| KAL01704BLFGFG | keetouch | Electronic Component RoHS : Not Compliant | 2 | |||
 Interstate Connecting Components | F2(Z) 1/4 BLACK SPL | SUMITOMO ELECTRIC Interconnect Products | 139-10022 F2(Z) 1/4 BLACK SPL |
| 900 | |
| SFTW-203-3/4-BLK-200FT | 3M Interconnect | 7100025274 TE100045208 SFTW203 3/4 (18MM) BK SPL 3200 |
| 150 | ||
| B2 (4XC) 3/4 BLACK SPL | SUMITOMO ELECTRIC Interconnect Products | 133-10001 B2 (4XC) 3/4 BLACK SPL |
| 100 | ||
| O2B2S 3/4 BLACK SPL | SUMITOMO ELECTRIC Interconnect Products | 114-11007 M23053/4-204-0 O2B2S 3/4 BLACK SPL |
| 75 | ||
| 447HS531M2314BL | Glenair Inc | BANDING BACKSHELL STRAIGHT W BOOT AND SPANNER NUT | 0 | |||
| 10121505-080004BLF | Amphenol FCi | HPCE VR-2HP4S | 0 | |||
| 10127905-B04B24BLF | Amphenol FCi |
| 0 | |||
| AB-DD14BL-DDBL-QD001 | Amphenol LTW Technology | X-LOK, LARGE SIZE, PLASTIC, 5A OVERMOLDED | 0 | |||
| 10121505-160044BLF | Amphenol FCi | HPCE VR PF 4HP44S-10121505-160 |
| 0 | ||
| 10139371-1824BLF | Amphenol FCi | EHPCE RAR STB 18MP24S-10139371 | 0 | |||
| AB-DD14BL-DDBL-QDA05 | Amphenol LTW Technology | X-LOK, LARGE SIZE, PLASTIC, 5A OVERMOLDED | 0 | |||
| 70524BLF | Amphenol FCi | 70524BLF-DSUB F DUST CAP STD 1 |
| 0 | ||
| 10126619-000844BLF | Amphenol FCi | HPCE RAR STB 44S4LP-10126619-0 RoHS : Unknown | 0 | |||
| AB-CB04BL-CBBR-QD004 | Amphenol LTW Technology | X-LOK, MIDDLE SIZE, PLASTIC, 1 OVERMOLDED | 0 | |||
| 10129378-903004BLF | Amphenol FCi | 10129378-903004BLF-HEADER SR V RoHS : Compliant |
| 0 | ||
 NexGen Digital | MMBZ5224BLT1G | onsemi | RoHS : Compliant | 6,000 | ||
| APT5014BLLX | Advanced Power Technology | 36 | ||||
 PEI Genesis | B2 4XC 3/4 BLACK SPL | SUMITOMO ELECTRIC Interconnect Products |
| 6,000 | ||
| DCC.07.04B.LAG | LEMO connectors | RoHS : Compliant |
| 8 | ||
| 21F4014BL1906CN | SOURIAU-SUNBANK |
| 0 | |||
| 21F4014BL1102C | SOURIAU-SUNBANK |
| 0 | |||
| 21F4014BL0902N | SOURIAU-SUNBANK |
| 0 | |||
| 21F4014BL2507CN | SOURIAU-SUNBANK |
| 0 | |||
| AT13-6P2-BM04BLU | Amphenol Sine Systems |
| 0 | |||
| ATP13-4P-BM04BLK | Amphenol Sine Systems |
| 0 | |||
| ATP15-2P-BM04BLK | Amphenol Sine Systems |
| 0 | |||
| CPX100-0094-BLK | DSG-Canusa |
| 0 | |||
| ATP15-4P-BM04BLK | Amphenol Sine Systems |
| 0 | |||
| ATP13-2P-BM04BLK | Amphenol Sine Systems |
| 0 | |||
| CPX100-0094-BLK-SP1000 | DSG-Canusa |
| 0 | |||
| AT15-6P2-BM04BLU | Amphenol Sine Systems |
| 0 | |||
| 21F4014BL1302C | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | STB24-BLANK-2 | TE Connectivity | Connectors |
| 2,442 | |
| CMT4/BL | Altech Corporation | DIN Term Blk, Screw, Feed-Thru |
| 1,304 | ||
| 10129379-910004BLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,188 | ||
| 72309-8034BLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,109 | ||
| 10129381-912004BLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,056 | ||
| 10129382-912004BLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,047 | ||
| 10129382-916004BLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 924 | ||
| FP21-HST-1/4-X-4'-BLACK | TE Connectivity | Connectors |
| 660 | ||
| CP2.5/4/BL | Altech Corporation | DIN Term Blk, Push-In, 4 Conn |
| 630 | ||
| CX4/4/BL | Altech Corporation | DIN Term Blk, Spring, 4 Conn |
| 345 | ||
| CYDL4/BL | Altech Corporation | DIN Term Blk, Screw, Dbl Level |
| 329 | ||
| CYF4/BL | Altech Corporation | DIN Term Blk, Screw, Fuse, 5x20mm |
| 231 | ||
| CMB4/BL | Altech Corporation | Term Blk, Screw, Panel Mount, Feed-Thru |
| 188 | ||
| AT13-6P2-BM04BLU | Amphenol Sine Systems | Connector |
| 20 | ||
| NKTT-04BL | Neutrik USA Inc | Patch Cable TT nickel crimp/solder 18"- |
| 20 | ||
 Richardson RFPD | SE2574BL-RC | Skyworks Solutions Inc | 2.4 GHz 802.11b/g/n Power Amplifier RoHS : Compliant | 0 | ||
| HMC7044BLP10BE | Analog Devices Inc | Clock Generator 0.00015MHz to 800MHz-IN 3200MHz-OU RoHS : Compliant | 0 | |||
| APT5014BLLG | Microchip Technology Inc | Trans MOSFET N-CH 500V 35A 3-Pin(3+Tab) TO-247 Tub RoHS : Compliant |
| 0 | ||
| M3534B-L006-060-A5 | Bonitron | UNDERVOLT RIDE THRU | 0 | |||
| 303064BL | Winchester Interconnect | Misc Connector RoHS : Compliant | 0 | |||
| SE2574BL-R | Skyworks Solutions Inc | RF Amp Single Power Amp 2.5GHz 5V 8-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | TLP785(D4-BLL,F(C | Toshiba America Electronic Components | INSTOCK RoHS : Compliant | 17,031 | ||
| 72309-8034BLF | Amphenol Corporation | INSTOCK | 9,646 | |||
| SK54BL_R2_00001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 2,767 | |||
| 2SC3324-BL | Toshiba America Electronic Components | INSTOCK | 2,641 | |||
| MGZ 8541-6-6-1414 BLACK | STOCK | INSTOCK | 1,781 | |||
| MMA0204 BL | Vishay Intertechnologies | INSTOCK | 1,500 | |||
| MMA0204 BL | Vishay Intertechnologies | INSTOCK | 1,500 | |||
| KM6264BL-7L | INSTOCK | 1,400 | ||||
| CMA0204BL 1K5 +/-2% | INSTOCK | 1,260 | ||||
| MMBZ5234BLT1 | onsemi | INSTOCK RoHS : Not Compliant | 700 | |||
| DE1E3KX472MA4BL01 | INSTOCK | 588 | ||||
| IS63WV10224BLL-12HLI | INSTOCK | 325 | ||||
| HM6264BLP10L | GRIDC | INSTOCK | 13 | |||
| HM6264BLPI-10 | INSTOCK | 5 | ||||
| MMBZ5234BLT1G | onsemi | INSTOCK RoHS : Compliant | 4 | |||
 Avnet Abacus | 72309-8034BLF | Amphenol Corporation | USB Stacked Connector USB Type A USB 20 8 Ways Right Angle Copper Alloy (Alt: 72309-8034BLF) RoHS : Compliant | 20,951 | ||
| 70524BLF | Amphenol Corporation | Dust Cap Cover Dust Cap 15 Position DSub Receptacle Connectors PP Polypropylene Body (Alt: 70524BLF) RoHS : Compliant | 0 | |||
| SV75K14BL1 | Bourns Inc | (Alt: SV75K14BL1) RoHS : Compliant | 0 | |||
| EV150K14BL2 | Bourns Inc | EV 150 K 14 B L2 (Alt: EV150K14BL2) RoHS : Not Compliant | 0 | |||
| CVQ320K14BL1 | Bourns Inc | (Alt: CVQ320K14BL1) RoHS : Compliant | 0 | |||
| D15S13A6GV4BLF | Amphenol Corporation | Conn DSubminiature SKT 15 POS 274mm Solder RA ThruHole 15 Terminal 1 Port (Alt: D15S13A6GV4BLF) RoHS : Compliant | 0 | |||
| PQ2614BLA-330K | Bourns Inc | (Alt: PQ2614BLA-330K) RoHS : Compliant | 0 | |||
| PQ2614BLA-220K | Bourns Inc | (Alt: PQ2614BLA-220K) RoHS : Compliant | 0 | |||
| PQ2614BLA-4R7K | Bourns Inc | (Alt: PQ2614BLA-4R7K) RoHS : Compliant | 0 | |||
| SC-L-ULT2-04-BL | Amphenol Corporation | (Alt: SC-L-ULT2-04-BL) RoHS : Compliant | 0 | |||
| DE2F3KH103MA4BL02H | Murata Manufacturing Co Ltd | MURDE2F3KH103MA4BL02H (Alt: DE2F3KH103MA4BL02H) RoHS : Compliant | 0 | |||
| 10129378-903004BLF | Amphenol Corporation | (Alt: 10129378-903004BLF) RoHS : Compliant | 0 | |||
| 10129379-909004BLF | Amphenol Corporation | Pin Header BoardtoBoard 254 mm 1 Rows 9 Contacts Through Hole Right Angle (Alt: 10129379-909004BLF) RoHS : Compliant | 0 | |||
| 10129379-910004BLF | Amphenol Corporation | Conn Unshrouded Header 10 POS 254mm Solder RA Through Hole (Alt: 10129379-910004BLF) RoHS : Compliant | 0 | |||
| 10129381-912004BLF | Amphenol Corporation | Pin Header BoardtoBoard 254 mm 2 Rows 12 Contacts Through Hole Straight FCI Econostik (Alt: 10129381-912004BLF) RoHS : Compliant | 0 | |||
Avnet Asia | TLP293(V4-BLTR,E(T | Toshiba America Electronic Components | TOSTLP293(V4-BLTR,E(T PHOTOCOUPLERS (Alt: TLP293(V4-BLTR,E(T) RoHS : Compliant | 0 | ||
| 70524BLF | Amphenol Corporation | (Alt: 70524BLF) RoHS : Compliant | 0 | |||
| TLP383(D4BL-TL,E(T | Toshiba America Electronic Components | TOSTLP383(D4BL-TL,E(T TOSHIBA PHOTOCOUPL (Alt: TLP383(D4BL-TL,E(T) RoHS : Compliant | 0 | |||
| 72309-8034BLF | Amphenol Corporation | (Alt: 72309-8034BLF) RoHS : Compliant | 0 | |||
| MMBZ5234BLT1G | onsemi | (Alt: MMBZ5234BLT1G) RoHS : Compliant | 0 | |||
| SZMMBZ5244BLT1G | onsemi | (Alt: SZMMBZ5244BLT1G) RoHS : Compliant | 0 | |||
| TLP185(V4BLTL,SE | Toshiba America Electronic Components | Optocoupler Single Open Collector-OUT 3750Vrms 4-Pin SOIC (Alt: TLP185(V4BLTL,SE) RoHS : Compliant | 0 | |||
| TLP785(D4-BLL,F(C | Toshiba America Electronic Components | (Alt: TLP785(D4-BLL,F(C) RoHS : Compliant | 0 | |||
| MMBZ5254BLT1G | onsemi | (Alt: MMBZ5254BLT1G) RoHS : Compliant | 0 | |||
| N201-S04-BL | Eaton Corporation | CAT6 GIGABIT SNAGLESS SLIM UTP ETHERNET (Alt: N201-S04-BL) RoHS : Compliant | 0 | |||
| MMBZ5244BLT1G | onsemi | (Alt: MMBZ5244BLT1G) RoHS : Compliant | 0 | |||
| SK54BLF | PanJit Semiconductor | Diode Schottky 5A 2-Pin SMB-FL (Alt: SK54BLF) RoHS : Compliant | 0 | |||
| TLP293(V4BLLTL,E(T | Toshiba America Electronic Components | Optocoupler 1-CH Common Collector 3750Vrms 4-Pin SOIC (Alt: TLP293(V4BLLTL,E(T) RoHS : Compliant | 0 | |||
| TLP383(D4BLLTL,E | Toshiba America Electronic Components | (Alt: TLP383(D4BLLTL,E) RoHS : Compliant | 0 | |||
| TLP385(D4BLLTR,E(T | Toshiba America Electronic Components | (Alt: TLP385(D4BLLTR,E(T) RoHS : Compliant | 0 | |||
 Avnet Silica | PZU24BL,315 | Nexperia | Zener Diode Single 24V 250mW 2Pin SOD882 (Alt: PZU24BL,315) RoHS : Compliant | 0 | ||
| VIPER114BLS | STMicroelectronics | (Alt: VIPER114BLS) RoHS : Compliant | 0 | |||
| PZU2V4BL,315 | Nexperia | PZU24BLSOD882SOD212NC934061651315 (Alt: PZU2.4BL,315) RoHS : Compliant | 0 | |||
| APT20M34BLLG | Microchip Technology Inc | (Alt: APT20M34BLLG) RoHS : Compliant | 0 | |||
| MMBZ5234BLT1G | onsemi | Zener Single Diode 62 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5234BLT1G) RoHS : Compliant | 0 | |||
| MMBZ5254BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: MMBZ5254BLT1G) RoHS : Compliant | 0 | |||
| MC60ECB-04-BLE | Quectel Wireless Solutions Co Ltd | Cellular Module GNSS GPRS GSM 33V to 46V 187mm x 16mm x 21mm (Alt: MC60ECB-04-BLE) RoHS : Compliant | 0 | |||
| SZMMBZ5244BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5244BLT1G) RoHS : Compliant | 0 | |||
| SK54BL_R2_00001 | PanJit Semiconductor | (Alt: SK54BL_R2_00001) RoHS : Compliant | 0 | |||
| SZMMBZ5234BLT1G | onsemi | Zener Single Diode 62 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: SZMMBZ5234BLT1G) RoHS : Compliant | 0 | |||
| IS34MW01G164-BLI | Integrated Silicon Solution Inc | NAND Flash Memory with 4b ECC 1Gb 64Mx16 18V 63Pin VFBGA Tray (Alt: IS34MW01G164-BLI) RoHS : Compliant | 0 | |||
| IS34MW01G084-BLI | Integrated Silicon Solution Inc | SLC NAND Flash Parallel 18V 1Gbit 128M X 8bit 45ns 63Pin VFBGA Tray (Alt: IS34MW01G084-BLI) RoHS : Compliant | 0 | |||
| IS34MW01G164-BLI-TR | Integrated Silicon Solution Inc | (Alt: IS34MW01G164-BLI-TR) RoHS : Compliant | 0 | |||
| IS34ML01G084-BLI-TR | Integrated Silicon Solution Inc | NAND Flash Memory 1Gb 33V 63Pin VFBGA Surface Mount TR (Alt: IS34ML01G084-BLI-TR) RoHS : Compliant | 0 | |||
| IS34MW01G084-BLI-TR | Integrated Silicon Solution Inc | (Alt: IS34MW01G084-BLI-TR) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | MMBZ5234BLT1 | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 9,756 | |
| MMBZ5234BLT1 | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 9,498 | ||
| RS1094B-LRIP | Murata Connectivity | IN STOCK SHIP TODAY | 8,645 | |||
| MMBZ5244BLT1 | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 925 | ||
| PYK-4-BLACK | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 800 | |||
| AVK-4-BLUE | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY |
| 600 | ||
| PYK-4-BLUE | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 400 | |||
| AVK-4-BLACK | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY |
| 300 | ||
| HSMP-3804-BLK | Hewlett Packard Co | IN STOCK SHIP TODAY |
| 200 | ||
| LCC4-14B-L | Panduit Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 168 | ||
| XS100-3/4-BLK | Manhattan Wire Products (MWP) | IN STOCK SHIP TODAY |
| 97 | ||
| FPS-012-6024-BLK | IN STOCK SHIP TODAY |
| 89 | |||
| CBX4BL-A | Panduit Corp | IN STOCK SHIP TODAY |
| 60 | ||
| ATF-551M4-BLK | Agilent Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
| 64BLD | Cooper Industries | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | SHCM4X14-BLU-STL | SOCKET HEAD CAP SCR | Socket Head Cap Screw |
| 5,760 | |
| CCF-1-3/4-10-14-BLK | Caplugs |
| 6 | |||
| 7810-24BL-G1001 | Sugatsune Kogyo Co Ltd | CABINET LOCK | 0 | |||
| HG-JHS11-4BL | Sugatsune Kogyo Co Ltd | SELF-OPEN DAMPER HINGE | 0 | |||
| SYH-224BL-M4 | Sugatsune Kogyo Co Ltd | LARGE HANDLE | 0 | |||
| 2534-BLANK-A | RAF Electronic Hardware | 0 | ||||
| 3314BLACK | Essentra Components | 0 | ||||
| 29R004BL | Essentra Components | ROUND PRESS LOCK THUMB SCREW K | 0 | |||
| NF-R64-BL | Sugatsune Kogyo Co Ltd | 2-12 ROUND RETRACTABLE HOOKS | 0 | |||
| KN4C----4S4BL22 | Essentra Components | CLAMPING 4 ARM KNOB 1.730 IN D | 0 | |||
| SRH-224BL-M5 | Sugatsune Kogyo Co Ltd | ALUMINIUM DOOR HANDLE | 0 | |||
| MC-84/BLK | Sugatsune Kogyo Co Ltd | 0 | ||||
| D-CATCH24/BLK | Sugatsune Kogyo Co Ltd | 0 | ||||
| 3724BLACK | Essentra Components | 0 | ||||
| RKW-12-24-BL | Essentra Components | CABLE TIE, HOOK LOOP, BLUE | 0 | |||
 EBV Elektronik | TLP383(D4BLLTL,E(T | Toshiba America Electronic Components | Optocoupler 1CH Open CollectorOUT 5000Vrms 4Pin SOIC (Alt: TLP383(D4BLLTL,E(T) RoHS : Compliant | 66,000 | ||
| TLP383(D4BLLTR,E(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin SO6L Tube (Alt: TLP383(D4BLLTR,E(T) RoHS : Compliant | 24,000 | |||
| TLP293(V4BLLTL,E(T | Toshiba America Electronic Components | Optocoupler 1CH Common Collector 3750Vrms 4Pin SOIC (Alt: TLP293(V4BLLTL,E(T) RoHS : Compliant | 10,000 | |||
| NFAM5065L4BL | onsemi | Intelligent Power Module SPM31 650 V 50A Low Speed Version (Alt: NFAM5065L4BL) RoHS : Compliant | 0 | |||
| MMBZ5234BLT1G | onsemi | Zener Single Diode 62 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5234BLT1G) RoHS : Compliant | 0 | |||
| MMBZ5254BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: MMBZ5254BLT1G) RoHS : Compliant | 0 | |||
| SZMMBZ5244BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5244BLT1G) RoHS : Compliant | 0 | |||
| SAF8544BLEL1/3Y | NXP Semiconductors | Pluto Sensor 12NC935464161518 (Alt: SAF8544BLEL1/3Y) RoHS : Compliant | 0 | |||
| SZMMBZ5234BLT1G | onsemi | Zener Single Diode 62 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: SZMMBZ5234BLT1G) RoHS : Compliant | 0 | |||
| TLP785(D4-BLL,F(C | Toshiba America Electronic Components | (Alt: TLP785(D4-BLL,F(C) RoHS : Compliant | 0 | |||
| TLP385(D4BLLTL,E(T | Toshiba America Electronic Components | Optocoupler 1CH Open CollectorOUT 5000Vrms 4Pin SO6L TR (Alt: TLP385(D4BLLTL,E(T) RoHS : Compliant | 0 | |||
| TLP293(V4-BLTL,E(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin SO Embossed TR (Alt: TLP293(V4-BLTL,E(T) RoHS : Compliant | 0 | |||
| TLP620MF(D4BLT4E(O | Toshiba America Electronic Components | Photocouplers (Alt: TLP620MF(D4BLT4E(O) RoHS : Compliant | 0 | |||
| TLP183(V4-BLTL,E(T | Toshiba America Electronic Components | (Alt: TLP183(V4-BLTL,E(T) RoHS : Compliant | 0 | |||
| E810XXVDA4BLK 978335 | Intel Corporation | Intel Ethernet Network Adapter E810XXVDA4 Retail Bulk (Alt: 978335) RoHS : Compliant | 0 | |||
 ECCO | F2211/4-BLACK-10 | Alpha Wire |
| 159 | ||
| FIT2211/4-BLACK-20X6-IN | Alpha Wire |
| 159 | |||
 FDH Electronics | 1/4-BLACK-INCH | SUMITOMO ELECTRIC Industries Ltd | Cable Protect | 2,494 | ||
| ES-P-1/4-BLACK | Saylor Technical Products | Cable Protect |
| 299 | ||
| ES-FR-3/4-BLACK/WHITE | Saylor Technical Products | Identification |
| 289 | ||
| A-A-52080-B-4-BLACK | Breyden Products | Cable Rt & Sec |
| 215 | ||
| M16878/4-BLE-0 | Amphenol Cable & Interconnect Technologies | Hook-Up Wire |
| 99 | ||
| A-A-52081-C-4-BLACK | Breyden Products | Cable Rt & Sec |
| 32 | ||
| MS3456KT10SL-4B-LC | Corsair Electrical Connectors Inc | Connector | 25 | |||
| 3/4-BLACK-INCH | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 8 | |||
| 7224-BLK | MARK | Cable Rt & Sec | 2 | |||
| H-2504 BLACK | FDH Electronics | Supplies - Wire | 2 | |||
| B2 (4XC) 3/4 BLACK SPL | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 0 | |||
| B2 (3X) 12/4 BLACK SPL | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 0 | |||
| 15PA90-4BL | Honeywell Sensing and Control | Switch Acc. | 0 | |||
| M16878/4-BLE-0 | Harbour Industries | Wire and Cable |
| 0 | ||
| KH230 1/4 BLACK SPL | SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | 0 | |||
 Flip Electronics | SZMMBZ5234BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 81,000 | ||
| SZMMBZ5264BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 72,000 | |||
| SZMMBZ5234BLT3G | onsemi | Stock, Ship Today RoHS : Compliant | 60,000 | |||
| MMBZ5264BLT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 24,000 | ||
| MMBZ5234BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 18,000 | |||
| MMBZ5244BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 5,400 | |||
| FS32V234BLN1VUB | NXP Semiconductors | Stock RoHS : Compliant | 721 | |||
 Maritex | MMBZ5234BLT1G | onsemi | Zener Diodes; MMBZ5234BLT1G; ON SEMICONDUCTOR; 3; 6.2 V; 5 �A; Single RoHS : Compliant |
| 11,297 | |
| MJ04BL-CT | CONNTHERM | Mini-Jumper; height 3.5mm; pitch 2.00mm; open cover; blue |
| 2,579 | ||
| MJ14BL-CT | CONNTHERM | Mini-Jumper with handle; height 13.5mm; pitch 2.54mm; open cover; blue |
| 230 | ||
| 72309-8034BLF | Amphenol Corporation | USB/DVI/HDMI Connectors; 72309-8034BLF; AMPHENOL; Receptacle; Gold; 8; Right Angle |
| 154 | ||
| P1614B-LN | BEISIT | Cabel gland PG16; nylon; PG16 10-14mm; black; Flat O-ring; with lock nut |
| 50 | ||
| M2014B-LN | BEISIT | Cabel gland M20; nylon; M20x1.5 10-14mm; flat O-ring;black;for wrench 27mm; with lock nut; |
| 48 | ||
 Master Electronics | CFG4BL | Panduit Corp | Module Frame Four Position RoHS : Compliant |
| 110 | |
| LCC4-14B-L | Panduit Corp | Two-hole long barrel lug #4 – #3 AWG STR #2 AWG SOL wire 1/4 stud hole .75 hole spacing. RoHS : Compliant |
| 28 | ||
| 5854-BLACK-1000 | Alpha Wire | Black - 304.8m (1000ft)/Spool RoHS : Compliant |
| 16 | ||
| 1854-BL005 | Alpha Wire | Hook-up Wire 24AWG 1.09mm Tinned Copper - Blue - 600V - 30.48m (100ft)/Spool RoHS : Compliant |
| 10 | ||
| 1854-BLACK-100 | Alpha Wire | Hook-up Wire 24AWG 1.09mm Tinned Copper Black 600V - 30.48m (100ft)/Spool RoHS : Compliant |
| 10 | ||
| 5854-BLACK-100 | Alpha Wire | Hook-up Wire 24AWG 1.14mm Silver Plated Copper Black 600V - 30.48m (100ft)/Spool RoHS : Compliant |
| 10 | ||
| CP2.5/4/BL | Altech Corporation | Terminal Block - Feed Through - 4 Position - 1 Level - 24A 1000V IEC / 20A 600V UL - 12 to 24 AWG - 5mm Width - Push In / Spring Termination - Black. RoHS : Compliant |
| 0 | ||
| XS200N3/4-BLACK-100 | Alpha Wire | Heat Shrink Tubing ST Nylon Black - 30.48m (100ft)/Spool RoHS : Compliant |
| 0 | ||
| XW5SP404BL | OMRON Industrial Automation | SHRT BAR 4MM 4 POLE BLUE RoHS : Compliant |
| 0 | ||
| VS-M12FSBP-OE-94B-LI/0-5 | Phoenix Contact | A 0.5-meter shielded 4-pair Ethernet cable assembly featuring an M12 flush-type socket for panel mounting on one end and a free cable end on the other. RoHS : Compliant |
| 0 | ||
| VS-M12FSBP-OE-94B-LI/5-0 | Phoenix Contact | Assembled Ethernet cable - shielded - 4-pair - AWG 26 stranded (7-wire) - RAL 5021 (sea blue) - M12 flush-type socket - rear/screw mounting with M16 thread to free cable end - line - length 5 m RoHS : Compliant |
| 0 | ||
| ZL30734BLDG1 | Microchip Technology Inc | 4-channel 10-output enhanced 1588 timing card RoHS : Compliant |
| 0 | ||
| DSC1124BL2-100.0000T | Microchip Technology Inc | MEMS OSC HCSL 100MHz 25PPM 2.5-3.3V -40 to 105C 5.0x3. RoHS : Compliant |
| 0 | ||
| DSC1224BL2-156M2500 | Microchip Technology Inc | MEMS OSC HCSL 156.25MHz 25ppm 2.5-3.3V -40 to 105C 5.0 RoHS : Compliant |
| 0 | ||
| CV150K14BL1 | Bourns Inc | Varistor Mov 395V Disc 14Mm Rohs Compliant: Yes |Bourns CV150K14BL1 RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8874/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/BL, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/BL is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/BL can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-BL coax. | 417 | ||
| PE3C8874/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/BL-12, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/BL-12 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/BL-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-BL coax. |
| 89 | ||
| PE3C8874/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/BL-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/BL-120 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/BL-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax. |
| 89 | ||
| PE3C8874/BL-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/BL-36, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/BL-36 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/BL-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-BL coax. |
| 89 | ||
| PE3C8874/BL-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/BL-72, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/BL-72 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/BL-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-BL coax. |
| 89 | ||
| PE3C8814/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/BL-12, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/BL-12 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/BL-12 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax. |
| 0 | ||
| PE3W19504/BL/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: MIL-STD-1553, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: MIL-STD-1553, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: PE-30-02001, RF Cable Impedance: 78 Ohm. MIL-STD-1553 Plug to MIL-STD-1553 Plug Cable Using 78 Ohm PE-30-02001 Coax with HeatShrink., Pasternack’s PE3W19504/BL/HS MIL-STD-1553 plug to MIL-STD-1553 plug RF cable assembly using PE-30-02001 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MIL-STD-1553 plug to MIL-STD-1553 plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MIL-STD-1553 cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MIL-STD-1553 cable connection on one end and a MIL-STD-1553 cable connection on the other. Our MIL-STD-1553 to MIL-STD-1553 cable assembly has a plug gender on end 1 and a plug on end 2. PE3W19504/BL/HS can also be known as a MIL-STD-1553 male to MIL-STD-1553 male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. The minimum bend radius for this cable is 2.42 inches, allowing for a single bend without damaging the cable. Our PE3W19504/BL/HS RF cable has a pvc jacket. This radio frequency cable assembly can withstand temperatures ranging from -20 to 75 degrees C. The flexible RF cable has an in-series connection. This PE3W19504/BL/HS MIL-STD-1553 male to MIL-STD-1553 male cable assembly is built with PE-30-02001, which is a flexible coax type. The Pasternack flexible MIL-STD-1553 cable assembly is manufactured with MIL-STD-1553 to MIL-STD-1553 cable connectors and has a 78 Ohm impedance. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This MIL-STD-1553 male to MIL-STD-1553 male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MIL-STD-1553 to MIL-STD-1553 cable assembly for quick shipment worldwide. Variations of MIL-STD-1553 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MIL-STD-1553 to MIL-STD-1553 RF cable assembly as per your requirements. | 0 | |||
| PE3C8744/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/BL-12, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/BL-12 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
| PE3C8744/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/BL-120, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/BL-120 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
| PE3C8814/BL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/BL-300, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/BL-300 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/BL-300 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-BL coax. |
| 0 | ||
| PE3C8814/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/BL-120, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/BL-120 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/BL-120 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax. |
| 0 | ||
| PE3C8744/BL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/BL-300, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/BL-300 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
| PE3W05154/BL/HS | Pasternack Enterprises | 0 | ||||
| PE3W15474/BL/HS | Pasternack Enterprises | 0 | ||||
| PE3C8814/BL-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/BL-72, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/BL-72 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/BL-72 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-BL coax. |
| 0 | ||
 Teledyne HiRel | M38510/50804BLA | Teledyne HiRel | PROG. LOGIC DEVICE, 22-INPUT 10-OUTPUT, 15 NS RoHS : Not Compliant | 0 | ||
 Vyrian | APT5024BLLG | Microchip Technology Inc | Power Field-Effect Transistor, 22A I(D), 500V, 0.24ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-247AD RoHS : Compliant | 8,504 | ||
| LM5574BLDT/NOPB | Texas Instruments | Switching Regulator, Current-mode, 0.8A, PDSO16 RoHS : Unknown | 8,058 | |||
| ATF-551M4-BLK | Broadcom Limited | RoHS : Compliant | 7,596 | |||
| HSMS-2814-BLKG | Broadcom Limited | Mixer Diode, Silicon RoHS : Compliant | 7,189 | |||
| AMGP-6434-BLKG | Broadcom Limited | Telecom Circuit, 1-Func RoHS : Compliant | 6,515 | |||
| DSC1124BL2-100.0000T | Microchip Technology Inc | HCSL Output Clock Oscillator, 100MHz Nom RoHS : Compliant | 6,104 | |||
| AMMP-5024-BLKG | Broadcom Limited | Wide Band Low Power Amplifier, 0.03MHz Min, 40000MHz Max, 1 Func, GAAS RoHS : Compliant | 6,020 | |||
| ADP2114-BL2-EVZ | Analog Devices Inc | 5,667 | ||||
| BLM16G40C18U4BL | Micron Technology Inc | 5,472 | ||||
| D4N-4BLE | OMRON Corporation | Snap Acting/Limit Switch, DPST, Momentary, 2.5A, 250VDC, Screw Terminal, Fork Lever Lock Actuator, Panel Mount RoHS : Compliant | 5,268 | |||
| HSMP-3824-BLK | Broadcom Limited | Pin Diode, 50V V(BR), Silicon RoHS : Not Compliant | 4,989 | |||
| BL8G30C15U4BL | Micron Technology, Inc | 2,726 | ||||
| MGF4964BL | Mitsubishi Electric | RF Small Signal Field-Effect Transistor, 1-Element, K Band, Gallium Arsenide, P-Channel, High Electron Mobility FET | 863 | |||
| FIT221-3/64-BLK | Alpha Wire | HEAT SHRINK TUBE, CROSSLINKED POLYOLEFIN, 1.17 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 629 | |||
| GUS-SS4BLF-03-5490-CC | Tt Electronics Plc | Array/Network Resistor, Bussed, Tantalum Nitride/nickel Chrome, 0.05W, 549ohm, 100V, 0.25% +/-Tol, 25ppm/Cel, 1915 | 601 | |||
 Waytek, Inc. | PET 3/4 BLACK 250' | Techflex Inc | Techflex PTN0.75BK-250 Standard Expandable Sleeving is black 3/4" braided polyester sleeving on a 250' spool. It features a 10 mil standard wall, fits recommended bundle sizes from 1/2" to 1-1/4", and is designed to slip over wire harnesses or tubing for abrasion protection and cable bundling. |
| 39,000 | |
| PET 1-1/4 BLACK 250' | Techflex Inc | Techflex PTN1.25BK-250 Standard Expandable Sleeving is black 1-1/4" braided polyester sleeving on a 250' spool. It features a 10 mil standard wall, fits recommended bundle sizes from 3/4" to 1-3/4", and is designed to slip over wire harnesses or tubing for abrasion protection and cable bundling. |
| 6,500 | ||
| PET 1-3/4 BLACK 200' | Techflex Inc | Techflex PTN1.75BK-200 Standard Expandable Sleeving is black 1-3/4" braided polyester sleeving on a 200' spool. It features a 10 mil standard wall, fits recommended bundle sizes from 1-1/4" to 2-3/4", and is designed to slip over wire harnesses or tubing for abrasion protection and cable bundling. |
| 5,400 | ||
| HST154BL-48-BULK | NSPA | NSPA HST154BL-48 HST150 Series flexible thin-wall heat shrink tubing is blue polyolefin tubing built for insulating and protecting wires, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable harness insulation. |
| 30 | ||
 Wuhan P&S | MMBZ5244BLT1G | onsemi | Zener Voltage Regulators 225 mW SOT23 Surface Mount RoHS : Compliant |
| 9,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand