| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
4913L-AE3-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | TLE4913HTSA1![]() | Infineon Technologies AG | Hall Effect Switch, Omnipolar, 20 Gauss, 10 Gauss, 3 V to 28 V, 3 Pins, SOT-23 - Tape and Reel (Alt: TLE4913HTSA1) RoHS : Compliant |
| 9,000 | |
| 1-1469491-3 | TE Connectivity | Connector Accessory, Keyed, Guide Pin, AMP MultiGig RT Series Backplane Connectors, MultiGig - Bulk (Alt: 1-1469491-3) RoHS : Compliant |
| 1,209 | ||
| M85049/130-16V | Glenair Inc | - Bulk (Alt: M85049/130-16V) RoHS : Not Compliant |
| 0 | ||
| M85049/130-15C | Glenair Inc | - Bulk (Alt: M85049/130-15C) RoHS : Not Compliant |
| 0 | ||
| 2214913-7 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 2214913-7) RoHS : Compliant | 0 | |||
| 45491-36T89 | ITT Interconnect Solutions | - Bulk (Alt: 45491-36T89) RoHS : Not Compliant |
| 0 | ||
RHFL4913KPA1![]() | STMicroelectronics | - Bulk (Alt: RHFL4913KPA1) RoHS : Not Compliant | 0 | |||
| ZW-05-12-F-S-649-137 | Samtec Inc | Board Stackers & Spacers, Pin Header, 16.48 mm, 5 Contacts, Solder, 1 Rows, 2.54 mm, ZW Series - Bulk (Alt: ZW-05-12-F-S-649-137) RoHS : Compliant |
| 0 | ||
| 5-146491-3 | TE Connectivity | - Bulk (Alt: 5-146491-3) RoHS : Compliant | 0 | |||
| 7010349131 | 3M Interconnect | This is a custom cable assembly. P - Bulk (Alt: 7010349131) RoHS : Not Compliant |
| 0 | ||
| M85049/130-05N | Glenair Inc | - Bulk (Alt: M85049/130-05N) RoHS : Not Compliant |
| 0 | ||
| M85049/130-05N | Amphenol Corporation | - Bulk (Alt: A8504913005N) RoHS : Not Compliant |
| 0 | ||
| M85049/130-13AV | Amphenol Corporation | Gasket for 5015 Circular Connector Viton - Bulk (Alt: A8504913013AV) RoHS : Not Compliant |
| 0 | ||
| M85049/130-16V | Amphenol Corporation | Gasket for 5015 Circular Connector Viton - Bulk (Alt: A8504913016V) RoHS : Not Compliant |
| 0 | ||
| M85049/130-20AN | Amphenol Corporation | Gasket for 5015 Circular Connector Neoprene - Bulk (Alt: A8504913020AN) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 744913118 | Wurth Elektronik | AIR CORE INDUCTOR, 18.5NH, 2.5GHZ, 4A; RoHS : Compliant |
| 7,110 | |
| 744913118 | Wurth Elektronik | AIR CORE INDUCTOR, 18.5NH, 2.5GHZ, 4A; RoHS : Compliant |
| 7,110 | ||
| TW-04-09-SM-S-249-138 | Samtec Inc | CONN STACK BRD, 2MM, 4POS, HDR; RoHS : Compliant |
| 755 | ||
| TW-06-09-SM-S-249-138 | Samtec Inc | CONN STACK BRD, 2MM, 6POS, HDR; RoHS : Compliant |
| 521 | ||
| 744913118G | Wurth Elektronik | AIR CORE INDUCTOR, 18.5NH, 0.0039 OHM/4A; RoHS : Compliant |
| 340 | ||
| 744913118G | Wurth Elektronik | AIR CORE INDUCTOR, 18.5NH, 0.0039 OHM/4A; RoHS : Compliant |
| 340 | ||
| 7447649133 | Wurth Elektronik | INDUCTOR, 33UH, 10%, 0.32A, 22MHZ, 1210; RoHS : Compliant |
| 220 | ||
| 744913112 | Wurth Elektronik | AIRCORE INDUCTOR, 12.5NH, 4A; RoHS : Compliant |
| 118 | ||
| 744913112 | Wurth Elektronik | AIRCORE INDUCTOR, 12.5NH, 4A; RoHS : Compliant |
| 118 | ||
| 094.91.3 | FINDER SpA | RELAY ACCESSORIES; RoHS : Compliant |
| 96 | ||
| FMC00491-36 | Fairview Microwave Inc | RF - COAXIAL CABLE ASSEMBLIES; RoHS : Not Compliant |
| 64 | ||
| 744913080G | Wurth Elektronik | AIR CORE INDUCTOR, 8NH, 0.0026 OHM, 4A; RoHS : Compliant |
| 46 | ||
| 744913080G | Wurth Elektronik | AIR CORE INDUCTOR, 8NH, 0.0026 OHM, 4A; RoHS : Compliant |
| 46 | ||
| M85049/139-8 | Glenair Inc | Telescoping Bushing; RoHS : Not Compliant |
| 4 | ||
| 11_N-50-4-9/133_NE | HUBER+SUHNER | RF COAX CONN, N PLUG, 50 OHM, CABLE; RoHS : Compliant |
| 3 | ||
![]() Analog Devices Inc | MAX14913EVKIT# | Analog Devices Inc | EVKIT for Octal High-Speed Hig |
| 9 | |
![]() RS | T92S11D22-24 (9-1393211-4) | TE Connectivity | HIGH POWER PCB RELAY, 30A, 24 VDC, RATED 120/277VAC, PANEL MOUNT, QUICK CONNECT |
| 403 | |
| 54913BE | Color-Keyed | COPPER ONE-HOLE LUG, 250 KCMIL, 1/2" BOLTSIZE, DIE CODE 62, COLOR CODE YELLOW |
| 100 | ||
| 104913 | RS Pro | CLEAR FILAMENT INDICATOR LAMP G3 1/2 BA9S 6.5V 300 MA 12LM 4000H |
| 75 | ||
| 69083149138 | Norton Winter | MOUNTED POINT, VITRIFIED BOND, QUANTUM, 3NQ CA,1IN. X 1/8IN. |
| 20 | ||
| 73093-5 (4913027) | Pomona Electronics | RET. SHEATHED BANANA PLUG QUICK CONNECTION (GREEN) |
| 12 | ||
| 45-34-9134 | Milwaukee Electric Tool Corporation | DEEP SOCKET WITH FOUR FLAT SIDES 1/2-INCH DRIVE 10MM METRIC 6-POINT |
| 11 | ||
| 130048-0349 (1300480349) | Woodhead Molex | DOUBLE ENDED CORDSET, 4 POLES, M12 MALE TO RJ-45 MALE, 24AWG, TPE, TEAL, 3 M |
| 9 | ||
| 73093-9 (4913066) | Pomona Electronics | RET. SHEATHED BANANA PLUG QUICK CONNECTION (WHITE) |
| 8 | ||
| 69083149139 | Norton Winter | QUANTUM VITRIFIED BOND MOUNTED POINT A13NQ80-OVS 80 GRIT, 3/4 X 1/4 IN. |
| 5 | ||
| 449130 | RS Pro | CABLE MOUNT LOUDSPEAKER CONNECTOR 4 WAY 20 A |
| 3 | ||
| RSFV 49-1.3M/14.5 (U-06946) | TURCK Inc | CONNECTOR, RSFV 49-1.3M/14.5, U-06946 |
| 3 | ||
| VUVS-L25-M32C-AD-N14-F8-1C1 (594913) | Festo | SOLENOID VALVE, 24VDC, 1300L/MIN FLOW, 3/2, NC, 1/4NPT, VUVS-L SERIES |
| 2 | ||
| 4913 | CR Seals | SINGLE LIP OIL SEAL, I.D. 12 MM, O.D. 19 MM, THICKNESS 3 MM |
| 0 | ||
| 4913 | Adafruit Industries | ADAFRUIT MINI SKINNY NEOPIXEL LED STRIP - WARM WHITE 3000K |
| 0 | ||
| 4913 | Dichtomatik | O-RING, 18,00 4,50 70 NBR NB7027 |
| 0 | ||
![]() Microchip Technology Inc | 1N4913A | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 615 | |
| 2N4913 | Microchip Technology Inc | Power BJT _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 121 | ||
| CDLL4913 | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| GC4491-30 | Microchip Technology Inc | Si PIN Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| 1N4913/TR | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| CDLL4913A | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| 1N4913A/TR | Microchip Technology Inc | Temperature Compensated _ DO-35, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| CDLL4913/TR | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| CDLL4913A/TR | Microchip Technology Inc | Temperature Compensated _ DO-213AA, Projected EOL: 2049-02-05 RoHS : Not Compliant |
| 0 | ||
| USB24913C-V/LSXV10 | Microchip Technology Inc | 2-port (1 type-C) USB 2.0 Hi-Speed Multi-Host Hub, VQFN, Projected EOL: 2051-09-14 - Contact for Pricing RoHS : Compliant | 0 | |||
| USB24913C-V/LSXV03 | Microchip Technology Inc | 2-port (1 type-C) USB 2.0 Hi-Speed Multi-Host Hub, VQFN, Projected EOL: 2051-08-10 - Contact for Pricing RoHS : Compliant | 0 | |||
| USB24913PT-V/LSXV06 | Microchip Technology Inc | 2-port (1 type-C) USB 2.0 Hi-Speed Multi-Host Hub with full PD, VQFN, Projected EOL: 2051-02-22 - Contact for Pricing RoHS : Compliant | 0 | |||
| USB24913CT-V/LSXV08 | Microchip Technology Inc | 2-port (1 type-C) USB 2.0 Hi-Speed Multi-Host Hub, VQFN, Projected EOL: 2051-06-10 - Contact for Pricing RoHS : Compliant | 0 | |||
| USB24913CT-V/LSXV11 | Microchip Technology Inc | 2-port (1 type-C) USB 2.0 Hi-Speed Multi-Host Hub, VQFN, Projected EOL: 2051-02-06 - Contact for Pricing RoHS : Compliant | 0 | |||
| USB24913CT-V/LSXV04 | Microchip Technology Inc | 2-port (1 type-C) USB 2.0 Hi-Speed Multi-Host Hub, VQFN, Projected EOL: 2050-11-11 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Rochester Electronics | TLE4913HTSA1![]() | Infineon Technologies AG | TLE4913 - Hall Switch RoHS : Compliant |
| 585 | |
| 2SC4913-01-E | Renesas Electronics Corporation | NPN Triple Diffused Transistor RoHS : Compliant |
| 46 | ||
![]() Sager | 2214913-7 | TE Connectivity | Power to the Board MBCE 2X2 P + 2X6 S VERTICAL EON RoHS : Compliant | 0 | ||
| 54913BEUB | ABB Group | Fixed Terminal Blocks |
| 0 | ||
| ZW-05-12-F-S-649-137 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| 54913BEPH | ABB Group | Terminals |
| 0 | ||
| 614-91-308-31-018000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD RECEPTACLE CARRIER | 0 | |||
| 1491347 | Phoenix Contact | Pluggable Terminal Blocks XPC 2 5/ 5-ST-5 08 RoHS : Compliant |
| 0 | ||
| 124-91-328-41-002000 | Mill-Max Mfg Corp | IC & Component Sockets DIP Dual In Line Socket | 0 | |||
| 114-91-328-41-117000 | Mill-Max Mfg Corp | IC & Component Sockets DIP Dual In Line Socket RoHS : Not Compliant | 0 | |||
| 5044491307 | Molex | Headers & Wire Housings PICOCLASP 1.00MM HDR 01X13P RoHS : Compliant |
| 0 | ||
| 54913BE06B | ABB Group | 54913BE 3/8 BOLT BOTTOM STACK LUG |
| 0 | ||
| 54913BERF | ABB Group | Terminals | 0 | |||
| M49138B021000G | BOYD Laconia | Heat Sinks Max Clip Heat Sink, TO247, TO220, TO126, Solder Pins, 22x35.05x32mm, No Clip | 0 | |||
| DW-49-13-F-S-885 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| IELHK11-1REC5-34913-13-R24 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 4913HA22101200 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding GK,NiCu,PTAF,TPE,HB,Rec | 0 | |||
![]() TME | 1249139 | Lapp Group | Wire; ÖLFLEX® HEAT 125 SC A; 1x0.75mm2; stranded; Cu; XLPO; black |
| 100 | |
| 94913 | Goobay | Patch cord; U/FTP; Cat 6; RJ45 plug,both sides; stranded; Cu; PVC |
| 11 | ||
| MIKROE-4913 | MikroElektronika | Click board; prototype board; Comp: KP264XTMA1; pressure sensor |
| 1 | ||
| 0623 004 913 | RECA | Drill bit-kit; for metal; high speed steel HSS-TiaIN; 1÷13mm |
| 1 | ||
| 00114913 | GSR | Tap; M20; 0.5; L: 80mm; Holder: square,hand; 12mm; finishing |
| 0 | ||
| 10049130 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 30; SMT; 3A; 250V; 2x15 |
| 0 | ||
| 1491320000 | Weidmüller Interface GmbH & Co. KG | 1491320000 RoHS : Compliant |
| 0 | ||
| 1849134 | Phoenix Contact | Connector: pluggable terminal block; female; COMBICON M; 12A RoHS : Compliant |
| 0 | ||
| 1934913 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 12A; 630V RoHS : Compliant |
| 0 | ||
| 1491342 | Bossard Group | Lifting eye bolt; M10; M10x70; 1.5; Head: eye; A2 stainless steel |
| 0 | ||
| 1849133 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 8A; 320V RoHS : Compliant |
| 0 | ||
| ECWF4913JL | Panasonic Electronic Components | Capacitor: polypropylene; ECWF; 91nF; 400VDC; 13x7.8x10.7mm; THT RoHS : Compliant |
| 0 | ||
| SK 75 TAA 12 24913990 | SEMIKRON | Module: thyristor; double independent; 1.2kV; 75A; SEMITOP2; screw |
| 0 | ||
| 1491377 | Bossard Group | Lifting eye bolt; M12; M12x50; 1.75; Head: eye; A2 stainless steel |
| 0 | ||
| 1491390000 | Weidmüller Interface GmbH & Co. KG | 1491390000 RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | SI4913DY![]() | Vishay Siliconix | Transistor RoHS : Not Compliant | 84 | ||
![]() Interstate Connecting Components | 2214913-7 | TE Connectivity | MBCE 2X2 P + 2X6 S VERTICAL EON RoHS : Compliant |
| 247 | |
| 45491-36T89 | ITT Interconnect Solutions | 45491-36T89 | 0 | |||
| M85049/130-05N | Amphenol PCD | M85049130-05N | 0 | |||
| M85049/130-05N | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| M85049/130-13AV | Amphenol PCD | M85049130-13AV | 0 | |||
| M85049/130-15C | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
| M85049/130-16V | Amphenol PCD | M85049130-16V | 0 | |||
| M85049/130-16V | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| M85049/130-20AN | Amphenol PCD | M85049130-20AN | 0 | |||
| M85049/130-37S | Amphenol PCD | M85049130-37S | 0 | |||
| M85049/130-37S | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S | 0 | |||
| M85049/130-42M | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
| 2204913-1 | TE Connectivity | MEZZANINE POWER PIN 200A CONNE RoHS : Compliant | 0 | |||
| 10159549-132KCLF | Amphenol FCi | WIRELOCK 32PIN C REC-10159549- |
| 0 | ||
| M85049/130-12F | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
![]() PEI Genesis | M85049/130-05N | Amphenol PCD |
| 0 | ||
| M85049/130-13AV | Amphenol PCD |
| 0 | |||
| M85049/130-16V | Amphenol PCD |
| 0 | |||
| M85049/130-20AN | Amphenol PCD |
| 0 | |||
| M85049/130-37S | Amphenol PCD |
| 0 | |||
| M85049/130-12F | Amphenol PCD |
| 0 | |||
| M85049/130-23N | Amphenol PCD |
| 0 | |||
| M85049/130-34V | Amphenol PCD |
| 0 | |||
| M85049/130-49F | Amphenol PCD |
| 0 | |||
| M85049/138-63B | ITT Interconnect Solutions |
| 0 | |||
| M85049/139-4L | Amphenol PCD |
| 0 | |||
| KJA111434-913 | ITT Interconnect Solutions |
| 0 | |||
| M85049/130-19S | Amphenol PCD |
| 0 | |||
| M85049/130-21F | Amphenol PCD |
| 0 | |||
| M85049/130-32N | Amphenol PCD |
| 0 | |||
![]() Richardson RFPD | 1491-3-LIM | Spectrum Control | RF Coax Termination RoHS : Compliant | 0 | ||
| SI5391A-A14913-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| 3684913 | Wakefield-Vette | THERMAL HARDWARE RoHS : Compliant |
| 0 | ||
| 85174913 | HUBER+SUHNER | Cable Assembly Coaxial 0.203m SMPM-T to SMPM-T F-F | 0 | |||
| SI5391A-A14913-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| SI5338K-B04913-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| 85154913 | HUBER+SUHNER | 85154913 RoHS : Compliant |
| 0 | ||
| SI5338K-B04913-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| PKB4913PINB | Ericsson Power Modules | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| PKU4913DPI | Ericsson Power Modules | DCTODC CONVERTR MOD RoHS : Compliant |
| 0 | ||
![]() Rutronik | TLE4913HTSA1![]() | Infineon Technologies AG | Hallswitch Omnipolar SC59-3 SMD RoHS : Compliant |
| 39,010 | |
![]() Chip 1 Exchange | 31404-9135 | Molex | INSTOCK | 11,440 | ||
TLE4913![]() | Infineon Technologies AG | INSTOCK RoHS : Compliant | 6,985 | |||
| 3-1461491-3 | TE Connectivity | INSTOCK RoHS : Compliant | 4,842 | |||
| 214913-E | ERNI | INSTOCK | 1,638 | |||
| 2214913-5 | TE Connectivity | INSTOCK RoHS : Compliant | 1,387 | |||
| APA83044913 | INSTOCK | 235 | ||||
![]() Avnet Abacus | 1491347 | Phoenix Contact | XPC 25 5ST508 XPC255ST508 (Alt: 1491347) RoHS : Compliant | 0 | ||
| 1491342 | Phoenix Contact | XPC 25 3ST508 XPC253ST508 (Alt: 1491342) RoHS : Compliant | 0 | |||
| 1491351 | Phoenix Contact | XPC 25 6ST508 XPC256ST508 (Alt: 1491351) RoHS : Compliant | 0 | |||
| 1491362 | Phoenix Contact | XPC 2516ST508 XPC2516ST508 (Alt: 1491362) RoHS : Compliant | 0 | |||
| 2302491-3 | TE Connectivity | (Alt: 2302491-3) RoHS : Compliant | 0 | |||
| 549135-000 | TE Connectivity | Connector Accessories TinelLock Backshell with Ring Size 10SL ST Aluminum Alloy Cadmium Finish Oli (Alt: 549135-000) RoHS : Not Compliant | 0 | |||
| 549135-000 | TE Connectivity | Connector Accessories TinelLock Backshell with Ring Size 10SL ST Aluminum Alloy Cadmium Finish Oli (Alt: 549135-000) RoHS : Not Compliant | 0 | |||
| 491332-000 | TE Connectivity | (Alt: 491332-000) RoHS : Not Compliant | 0 | |||
| 491394-000 | TE Connectivity | (Alt: 491394-000) RoHS : Compliant | 0 | |||
| 5-212491-3 | TE Connectivity | Conn Housing PL 5Coaxial POS Crimp ST (Alt: 5-212491-3) RoHS : Compliant | 0 | |||
| ECWF4913HLB | Panasonic Electronic Components | General Purpose Film Capacitor Metallized PP Radial Box 2 Pin 0091 uF 3 141 V 400 V (Alt: ECWF4913HLB) RoHS : Compliant | 0 | |||
| 1-1469491-3 | TE Connectivity | Connector Accessory Keyed Guide Pin AMP MultiGig RT Series Backplane Connectors MultiGig (Alt: 1-1469491-3) RoHS : Compliant | 0 | |||
| 1-1469491-3 | TE Connectivity | Connector Accessory Keyed Guide Pin AMP MultiGig RT Series Backplane Connectors MultiGig (Alt: 1-1469491-3) RoHS : Compliant | 0 | |||
| M85049/139-4L | Glenair Inc | Telescoping Bushing for M85049 Series Circular Connector Cable Clamp Blue Fluorosilicone (Alt: M85049/139-4L) RoHS : Not Compliant | 0 | |||
| M85049/139-4L | Amphenol Corporation | (Alt: M85049/139-4L) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 3-1461491-3 | TE Connectivity | Power Relay, PCN Series (Alt: 3-1461491-3) RoHS : Compliant |
| 10,000 | |
| 10159549-132KALF | Amphenol Corporation | Connector Housing, w/ CPA & TPA, WireLock, Receptacle, 32 Ways, 1.8 mm (Alt: 10159549-132KALF) RoHS : Compliant |
| 30 | ||
| 2577491-3 | TE Connectivity | (Alt: 2577491-3) RoHS : Compliant | 0 | |||
| FAN49130AUC300A2X | onsemi | (Alt: FAN49130AUC300A2X) RoHS : Compliant | 0 | |||
| FAN49130AUC370A2X-ENG | onsemi | (Alt: FAN49130AUC370A2X-ENG) RoHS : Compliant | 0 | |||
| FAN49130FAUC370A2X-ENG | onsemi | (Alt: FAN49130FAUC370A2X-ENG) RoHS : Compliant | 0 | |||
| FAN49130AUC370A2X | onsemi | (Alt: FAN49130AUC370A2X) RoHS : Compliant | 0 | |||
| PKU4913DPIHS | Flex Ltd | Isolated Through Hole DC/DC Converter, ITE, 2:1, 100 W, 1 Output, Adj, Fixed, 12 V, 8.3 A (Alt: PKU4913DPIHS) RoHS : Compliant | 0 | |||
| FAN49130AUC300A2X-ENG | onsemi | (Alt: FAN49130AUC300A2X-ENG) RoHS : Compliant | 0 | |||
| FAN49130AUC300X | onsemi | DC/DC BUCK-BOOST 1A (Alt: FAN49130AUC300X) RoHS : Compliant | 0 | |||
| FAN49130AUC350X | onsemi | DC/DC BUCK-BOOST 1A (Alt: FAN49130AUC350X) RoHS : Compliant | 0 | |||
| FAN49130AUC370X | onsemi | WLCSP16 SNGL PBF (Alt: FAN49130AUC370X) RoHS : Compliant | 0 | |||
| FAN49130FAUC300A2X | onsemi | (Alt: FAN49130FAUC300A2X) RoHS : Compliant | 0 | |||
| FAN49130FAUC390A2X | onsemi | (Alt: FAN49130FAUC390A2X) RoHS : Compliant | 0 | |||
| FAN49130FAUC300A2X-ENG | onsemi | (Alt: FAN49130FAUC300A2X-ENG) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BCV49,135![]() | Nexperia | (Alt: BCV49,135) RoHS : Compliant | 0 | ||
| RHFL4913ESY151 | STMicroelectronics | (Alt: RHFL4913ESY151) RoHS : Not Compliant | 0 | |||
RHFL4913KPA-01V![]() | STMicroelectronics | (Alt: RHFL4913KPA-01V) RoHS : Not Compliant | 0 | |||
RHFL4913KPA-02V![]() | STMicroelectronics | (Alt: RHFL4913KPA-02V) RoHS : Not Compliant | 0 | |||
| USB24913CT-V/LSXVAO | Microchip Technology Inc | VQFN44 AAutomotive USB 20 HiSpeed Controller with MultiHost Reflector and Power Delivery 30 (Alt: USB24913CT-V/LSXVAO) RoHS : Compliant | 0 | |||
| USB24913PT-V/LSXVAO | Microchip Technology Inc | VQFN44 AAutomotive USB 20 HiSpeed Controller with MultiHost Reflector and Power Delivery 30 (Alt: USB24913PT-V/LSXVAO) RoHS : Compliant | 0 | |||
| USPD24913P-V/LSXVAO | Microchip Technology Inc | B43548C6157M82 (Alt: USPD24913P-V/LSXVAO) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | TLE4913HTSA1![]() | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 39,000 | |
| CF1/4-913-J-T52 | KOA Speer Electronics Inc | IN STOCK SHIP TODAY |
| 7,100 | ||
| SML4749/13 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 180 | ||
| M85049/138-42B | Caplugs | IN STOCK SHIP TODAY |
| 35 | ||
| 2N4913 | Motorola Semiconductor Products | IN STOCK SHIP TODAY |
| 9 | ||
| 2N4913 | IN STOCK SHIP TODAY |
| 4 | |||
| 2N4913 | RCA | IN STOCK SHIP TODAY |
| 3 | ||
![]() DB Roberts | 491312 | Essentra Components | 0 | |||
| 491394 | Essentra Components | 0 | ||||
| 491313 | Essentra Components | 0 | ||||
| D1-004-913-010 | Southco | These versatile economical quarter turn fasteners for high-volume light-duty applications provide a low installed cost attractive aesthetics and more generous tolerance ranges than other quarter turn fasteners. Built-in detents indicate full engagement | 0 | |||
| 491331 | Essentra Components | 0 | ||||
| R4-81-491-30 | Southco | R4-81-491-30 | 0 | |||
| 491318 | Essentra Components | 0 | ||||
| 491319 | Essentra Components | 0 | ||||
| 491327 | Essentra Components | 0 | ||||
| 491328 | Essentra Components | 0 | ||||
| 491311 | Essentra Components | 0 | ||||
| 491393 | Essentra Components | 0 | ||||
| 491352 | Essentra Components | 0 | ||||
| 491389 | Essentra Components | 0 | ||||
| 491337 | Essentra Components | 0 | ||||
![]() EBV Elektronik | TLE4913HTSA1![]() | Infineon Technologies AG | Hall Effect Switch Omnipolar 20 Gauss 10 Gauss 3 V to 28 V 3 Pins SOT23 (Alt: SP000013490) RoHS : Compliant | 42,000 | ||
| RHFL4913KPA | STMicroelectronics | FLAT16MRadHard 30 A Adjustable Positive Vreg (Alt: RHFL4913KPA) RoHS : Compliant | 0 | |||
| IS31AP4913-QFLS2-TR | Lumissil Microsystems | 3D Surround Bass Enhanced High Quality Stereo Headphone Driver (Alt: IS31AP4913-QFLS2-TR) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M85049/130-05N | Glenair Inc | Connector | 0 | ||
| M85049/130-15C | Glenair Inc | Connector | 0 | |||
| M85049/130-16V | Glenair Inc | Connector | 0 | |||
| M85049/130-37S | Glenair Inc | Connector | 0 | |||
| M85049/130-42M | Glenair Inc | Connector | 0 | |||
| M85049/130-12F | Glenair Inc | Connector | 0 | |||
| M85049/130-15M | Glenair Inc | Connector Acc | 0 | |||
| M85049/130-23N | Glenair Inc | Connector | 0 | |||
| M85049/130-33C | Glenair Inc | Connector | 0 | |||
| M85049/130-34V | Glenair Inc | Connector | 0 | |||
| M85049/130-49F | Glenair Inc | Connector | 0 | |||
| M85049/139-4L | Glenair Inc | Connector Acc | 0 | |||
| M85049/139-4L | Amphenol PCD | Backshells & Ac | 0 | |||
| M85049/130-19S | Glenair Inc | Connector | 0 | |||
| M85049/130-21F | Glenair Inc | Connector | 0 | |||
![]() Master Electronics | 2214913-7 | TE Connectivity | MBCE 2X2 P + 2X6 S VERTICAL EON MOQ Reduction RoHS : Compliant |
| 0 | |
| 549135-000 | TE Connectivity | TXR18AB00D1104AI MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 54913BEUB | Thomas & Betts | Copper One-Hole Lug - 90 Degree Bend Long Barrel - Blind End - Wire Size 250 kcmil - 1/2 Inch Bolt Size - Tin Plated - Die Code 62 - Die Color Code Yellow. RoHS : Compliant |
| 0 | ||
| ZW-05-12-F-S-649-137 | Samtec Inc | FLEXIBLE BOARD STACKING H RoHS : Compliant |
| 0 | ||
| 54913BENT | Thomas & Betts | Copper One-Hole Lug - Long Barrel - Narrow Tongue - Blind End - Wire Size 250 kcmil - 1/2 Inch Bolt Size - Tin Plated - Die Code 62 - Die Color Code Yellow. RoHS : Compliant |
| 0 | ||
| 54913BEPH | Thomas & Betts | Copper One-Hole Lug - Long Barrel - Peep Hole - Wire Size 250 kcmil - 1/2 Inch Bolt Size - Tin Plated - Die Code 62 - Die Color Code Yellow. RoHS : Compliant |
| 0 | ||
| 7010349131 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 1491347 | Phoenix Contact | XPC 2 5/ 5-ST-5 08 RoHS : Compliant |
| 0 | ||
| 54913BE06B | Thomas & Betts | Copper One-Hole Lug - Long Barrel - Bottom Stacking - Blind End - Wire Size 250 kcmil - 3/8 Inch Bolt Size - Tin Plated - Die Code 62 - Die Color Code Yellow. RoHS : Compliant |
| 0 | ||
| ECW-F4913RHB | Panasonic Electronic Components | Cap Film 0.091uF 400V PP 3% (18 X 7 X 19mm) Radial 7.5mm 105°C Ammo Pack RoHS : Compliant |
| 0 | ||
| DW-49-13-F-D-745 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-49-13-F-D-790 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-49-13-F-S-885 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-49-13-L-S-740 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-149-13-T-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE4913 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Interface Type 1: .062 inch End Launch. SMA Male Connector Solder Attachment .062 inch End Launch PCB, .020 inch x .010 inch Contact. PE4913 SMA male pcb connector has an interface type of .062 inch end launch and a 50 Ohm impedance. Pasternack SMA male connector uses shield/contact solder as an attachment method. The Pasternack SMA male pcb connector has a PTFE dielectric type. The Pasternack SMA pcb connector has a brass body with gold plating. This SMA male pcb RF connector is RoHS and REACH compliant. This Pasternack male SMA connector will ship the same day as purchased. Our SMA male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well. |
| 475 | |
| PE3C4913-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Jack 2 Hole Flange to N Male Cable 24 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to N male cable 24 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to N male cable 24 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and type N cable connection on the other. Our BMA to type N cable assemblies have a jack gender on end 1 and male on end 2. This BMA to type N cable is a jack to male coax assembly, PE3C4913-24, can also be known as a BMA female to N type plug cable assembly and will be shipped same-day as it is purchased. BMA female to type N plug cable assembly PE3C4913-24 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency BMA jack 2 hole flange to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4913-24 can also be used in the other direction and will be type N male to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to N male cable 24 inch length using PE-SR402FLJ coax. |
| 84 | ||
| PE3C4913-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Jack 2 Hole Flange to N Male Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to N male cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to N male cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and N type cable connection on the other. Our BMA to type N cable assemblies have a jack gender on end 1 and male on end 2. This BMA to type N cable is a jack to male coax assembly, PE3C4913-12, can also be known as a BMA female to type N plug cable assembly and will be shipped same-day as it is purchased. BMA female to N type plug cable assembly PE3C4913-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency BMA jack 2 hole flange to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4913-12 can also be used in the other direction and will be type N male to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to N male cable 12 inch length using PE-SR402FLJ coax. |
| 84 | ||
| PE3C4913-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 6 inches. Slide-On BMA Jack 2 Hole Flange to N Male Cable 6 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to N male cable 6 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to N male cable 6 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and type N cable connection on the other. Our BMA to type N cable assemblies have a jack gender on end 1 and male on end 2. This BMA to type N cable is a jack to male coax assembly, PE3C4913-6, can also be known as a BMA female to type N plug cable assembly and will be shipped same-day as it is purchased. BMA female to N type plug cable assembly PE3C4913-6 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency BMA jack 2 hole flange to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4913-6 can also be used in the other direction and will be type N male to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to N male cable 6 inch length using PE-SR402FLJ coax. |
| 84 | ||
| PE3C4913-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Jack 2 Hole Flange to N Male Cable 36 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to N male cable 36 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to N male cable 36 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and N type cable connection on the other. Our BMA to type N cable assemblies have a jack gender on end 1 and male on end 2. This BMA to type N cable is a jack to male coax assembly, PE3C4913-36, can also be known as a BMA female to type N plug cable assembly and will be shipped same-day as it is purchased. BMA female to N type plug cable assembly PE3C4913-36 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency BMA jack 2 hole flange to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4913-36 can also be used in the other direction and will be type N male to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to N male cable 36 inch length using PE-SR402FLJ coax. |
| 84 | ||
| PE3C4913-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Jack 2 Hole Flange to N Male Cable 60 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to N male cable 60 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to N male cable 60 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and type N cable connection on the other. Our BMA to type N cable assemblies have a jack gender on end 1 and male on end 2. This BMA to N type cable is a jack to male coax assembly, PE3C4913-60, can also be known as a BMA female to type N plug cable assembly and will be shipped same-day as it is purchased. BMA female to type N plug cable assembly PE3C4913-60 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency BMA jack 2 hole flange to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4913-60 can also be used in the other direction and will be type N male to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to type N cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to N male cable 60 inch length using PE-SR402FLJ coax. |
| 84 | ||
| PE3W07491-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length: 36 inches. 2.92mm Male to 2.92mm Male Cable 36 Inch Length Using PE-118SR Coax., Radio frequency assembly 2.92mm male to 2.92mm male cable 36 inch length using PE-118SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.92mm male to 2.92mm male cable 36 inch length using PE-118SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE3W07491-36, can also be known as a 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3W07491-36 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 45 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male cable 36 inch length using PE-118SR coax. |
| 50 | ||
| PE3C9491-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP67 Rated, Length, Max: 36 inches. SHV Jack to SHV Jack Bulkhead Cable 36 Inch Length Using RG58 Coax., Radio frequency assembly SHV jack to SHV jack bulkhead cable 36 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack to SHV jack bulkhead cable 36 inch length using RG58 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV IP67 Rated cable assemblies have a jack gender on end 1 and jack on end 2. PE3C9491-36 can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3C9491-36 is built with RG58 which is a flexible coax type. The Pasternack IP67 Rated flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency SHV jack to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9491-36 can also be used in the other direction and will be SHV jack bulkhead to SHV jack cable assembly if the opposite connectivity is required. SHV female to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack to SHV jack bulkhead cable 36 inch length using RG58 coax. |
| 33 | ||
| PE3W04491-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMP Female Right Angle to SMP Female Right Angle Cable 36 Inch Length Using PE-SR047AL Coax., Radio frequency assembly SMP female right angle to SMP female right angle cable 36 inch length using PE-SR047AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMP female right angle cable 36 inch length using PE-SR047AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W04491-36 can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W04491-36 is built with PE-SR047AL which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable 36 inch length using PE-SR047AL coax. |
| 27 | ||
| PE44913 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMP, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder/Solder, Mount Method: None, Interface Type 1: RG405, Interface Type 2: PE-SR405FL, Interface Type 3: PE-SR405FLJ. SMP Female Right Angle Connector Solder Attachment for RG405, PE-SR405FL, PE-SR405FLJ Mitered Body. PE44913 SMP female right angle coaxial connector has an interface type of RG405, PE-SR405FL, PE-SR405FLJ and a 50 Ohm impedance. Pasternack SMP female connector uses shield/contact solder/solder as an attachment method. The Pasternack right angle SMP female coaxial connector has a PTFE dielectric type. The Pasternack SMP coaxial connector has a beryllium copper body with gold plating. Our PE44913 SMPright angle connector uses beryllium copper contact. This SMP female right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle female SMP connector will ship the same day as purchased. Our SMP right angle female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMP connector cable assemblies that will ship the same day as well. |
| 17 | ||
| PE3MSA00491-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRS SUBMINIATURE, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRS SUBMINIATURE, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. Lead Free TRS Subminiature Plug to Plug for PE-30-02003, 36" Cable., Radio frequency assembly lead free TRS subminiature plug to plug for PE-30-02003, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free TRS subminiature plug to plug for PE-30-02003, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS SUBMINIATURE to TRS SUBMINIATURE cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS SUBMINIATURE cable connection on one end and TRS SUBMINIATURE cable connection on the other. Our 1553 TRS SUBMINIATURE to TRS SUBMINIATURE cable assemblies have a plug gender on end 1 and plug on end 2. PE3MSA00491-36 can also be known as a 1553 TRS SUBMINIATURE male to TRS SUBMINIATURE male cable assembly and will be shipped same-day as it is purchased. TRS SUBMINIATURE male to TRS SUBMINIATURE male cable assembly PE3MSA00491-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRS SUBMINIATURE cable assembly is manufactured with TRS SUBMINIATURE to TRS SUBMINIATURE cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRS SUBMINIATURE plug to TRS SUBMINIATURE plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRS SUBMINIATURE male to TRS SUBMINIATURE male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS SUBMINIATURE to TRS SUBMINIATURE cable assembly for quick shipment worldwide. Variations of TRS SUBMINIATURE cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free TRS subminiature plug to plug for PE-30-02003, 36" cable. |
| 9 | ||
| PE7491-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 10 Watts, Body Material: Aluminum, Connector-In Series: NEX10, Connector-In Gender: Male, Connector-Out Series: NEX10, Connector-Out Gender: Female, Max Operating Temperature: 75 deg C, Min Operating Temperature: -40 deg C. 3 dB Fixed Attenuator, NEX10 Male to NEX10 Female Aluminum Body Rated to 10 Watts Up to 6 GHz. PE7491-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7491-3 fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 10 Watts. This attenuator has a maximum VSWR of 1.25:1 and operates between -40 and 75 deg C. Our fixed radio frequency attenuator with NEX10 connectors is constructed with aluminum body material. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a silver-plated beryllium copper inner conductor. This NEX10 attenuator has a male gender on side 1 and a NEX10 female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7491-3 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 3 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7491-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE3W04913LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male to TNC Female Bulkhead Cable Using PE-SR405FL Coax, LF Solder, RoHS. PE3W04913LF is a SMA male to TNC female bulkhead cable using PE-SR405FL coax. This Pasternack SMA male to TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to female TNC bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W04913LF SMA male to TNC female bulkhead cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3C6491-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX004, RF Cable Type: PE-SR070TNLL, RF Cable Impedance: 50 Ohm, Length: 36 inches. 1.85mm Male to 1.85mm Male Low Loss Cable 36 Inch Length Using 070 Coax., Radio frequency assembly 1.85mm male to 1.85mm male low loss cable 36 inch length using 070 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 1.85mm male to 1.85mm male low loss cable 36 inch length using 070 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.85mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 1.85mm cable connection on one end and 1.85mm cable connection on the other. Our low loss 1.85mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 1.85mm to 1.85mm cable is a male to male coax assembly, PE3C6491-36, can also be known as a low loss 1.85mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 1.85mm plug to 1.85mm plug cable assembly PE3C6491-36 is built with PE-SR070TNLL which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 70 GHz maximum frequency 1.85mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 1.85mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.85mm male to 1.85mm male low loss cable 36 inch length using 070 coax. |
| 0 | ||
| PE3W24913 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male Right Angle to Reverse Polarity SMA Male Cable Using RG142 Coax. PE3W24913 is a reverse polarity TNC male right angle to reverse polarity SMA male cable using RG142 coax. This Pasternack reverse polarity TNC male right angle to reverse polarity SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC right angle to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24913 TNC reverse polarity male right angle to SMA reverse polarity male cable assembly is constructed with RG142 coax. | 0 | |||
![]() TE Connectivity | 2842491-3 | TE Connectivity | 2x3P TB HDR HZ (90) 3.5, BK Number of Positions: 6 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .137 in Centerline (Pitch): 3.5 mm Push-In PCB Terminal Blocks: Time Saving Connector | 6 Header Wire-to-Board .137" | Part Number: 2842491-3 | Internal Number: 2842491-3 | .137" | TE Connectivity RoHS : Compliant |
| 2,183 | |
| 2491393-1 | TE Connectivity | SMA Jack Hermetic 2-Hole Flange EMI Gskt RF Interface: SMA RF Connector Style: Jack RF Connector Mated Outer Diameter (Approximate): .24 in RF Connector Mated Outer Diameter (Approximate): 6.29 mm Impedance: 50 Ω SMA Jack .24" 6.29 mm | Coax Connector | Part Number: 2491393-1 | Internal Number: 2491393-1 | TE Connectivity RoHS : Compliant |
| 260 | ||
| 1-1469491-3 | TE Connectivity | MULTIGIG RT GUIDEPIN, 9MM 4.20 Connector Hardware Accessory Type: Guide Pin Primary Product Material: Zinc Alloy Operating Temperature (Max): 221 °F Operating Temperature (Max): 105 °C Operating Temperature Range: -67 – 221 °F Guide Pin Zinc Alloy | Connector Hardware | Part Number: 1-1469491-3 | Internal Number: 1-1469491-3 | TE Connectivity RoHS : Compliant |
| 258 | ||
![]() Vyrian | MAX14913EVKIT | Analog Devices (Maxim Integrated) | 12,002 | |||
| MAX14913AKN-T | Analog Devices (Maxim Integrated) | 10,377 | ||||
| M85049/139-24D | Glenair Inc | Connector Accessory, Bushing, Silicone | 9,220 | |||
RHFL4913KPA1![]() | STMicroelectronics | Adjustable Positive Standard Regulator, 1.23V Min, 9V Max, BIPolar, CDFP16 RoHS : Not Compliant | 9,130 | |||
| 1934913 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,803 | |||
RHFL4913S331![]() | STMicroelectronics | Fixed Positive Standard Regulator, 3.3V, BIPolar, CBCC3 RoHS : Compliant | 8,164 | |||
| 1714913 | Phoenix Contact | Barrier Strip Terminal Block, 32A, 4mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,319 | |||
| 1N4913A | Microchip Technology Inc | Zener Diode, 12.8V V(Z), 5%, 0.4W RoHS : Not Compliant | 6,242 | |||
| RHFL4913ESY1505V | STMicroelectronics | Fixed Positive Standard Regulator, 1.5V, BIPolar | 5,717 | |||
| 1849134 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,913 | |||
| 2N4913 | Texas Instruments | Power Bipolar Transistor, 5A I(C), 40V V(BR)CEO, 1-Element, NPN, Silicon, TO-3, Metal, 2 Pin RoHS : Not Compliant | 3,091 | |||
| M85049/130-18N | Glenair Inc | Connector Accessory, Gasket, Neoprene | 680 | |||
RHFL4913KP501![]() | STMicroelectronics | Fixed Positive Standard Regulator, 5V, BIPolar, CDFP16 RoHS : Compliant | 451 | |||
RHFL4913KP25-01V![]() | STMicroelectronics | Fixed Positive Standard Regulator, 2.5V, BIPolar, CDFP16 RoHS : Compliant | 435 | |||
RHFL4913ESY251![]() | STMicroelectronics | Fixed Positive Standard Regulator, 2.5V, BIPolar, CSFM3 RoHS : Compliant | 403 | |||
![]() Waytek, Inc. | COV4913Z2 | KMC Controls Inc | 3" Vinyl Coated Clamp 3/4" Wide |
| 1,399 | |
![]() Win Source Electronics | TLE4913HTSA1![]() | Infineon Technologies AG | MAGNETIC SWITCH OMNIPOLAR SC59 RoHS : Compliant |
| 9,000 | |
| A4913KJPTR-T | Allegro MicroSystems LLC | IC MOTOR DRVR MULTIPHASE 48LQFP |
| 4,500 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |