| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
446L-S08-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | CY8C3446LTI-073 | Infineon Technologies AG | MCU 8-Bit PSoC 8051 CISC 64KB Flash 2.5V/3.3V/5V 48-Pin QFN EP Tray - Trays (Alt: CY8C3446LTI-073) RoHS : Compliant |
| 0 | |
| CY8C3446LTI-083 | Infineon Technologies AG | - Trays (Alt: CY8C3446LTI-083) RoHS : Compliant |
| 0 | ||
| CY8C3446LTI-085 | Infineon Technologies AG | MCU 8-Bit PSoC 8051 CISC 64KB Flash 2.5V/3.3V/5V 68-Pin QFN EP Tray - Trays (Alt: CY8C3446LTI-085) RoHS : Compliant |
| 0 | ||
| DW-32-09-F-D-446-LL | Samtec Inc | Board Stackers & Spacers, Pin Header, 11.33 mm, 64 Contacts, Solder, 2 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-32-09-F-D-446-LL) RoHS : Compliant |
| 0 | ||
| DW-05-09-F-D-446-LL | Samtec Inc | Board Stackers & Spacers, Pin Header, 11.33 mm, 10 Contacts, Solder, 2 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-05-09-F-D-446-LL) RoHS : Compliant |
| 0 | ||
| CY8C3446LTI-073T | Infineon Technologies AG | MCU 8-Bit PSoC 8051 CISC 64KB Flash 3.3V/5V 48-Pin QFN EP T/R - Tape and Reel (Alt: CY8C3446LTI-073T) RoHS : Compliant |
| 0 | ||
| DW-13-09-F-D-446-LL | Samtec Inc | Board Stackers & Spacers, Pin Header, 11.33 mm, 26 Contacts, Solder, 2 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-13-09-F-D-446-LL) RoHS : Compliant |
| 0 | ||
| DW-17-09-F-D-446-LL | Samtec Inc | Board Stackers & Spacers, Pin Header, 11.33 mm, 34 Contacts, Solder, 2 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-17-09-F-D-446-LL) RoHS : Compliant |
| 0 | ||
| CY8C3446LTI-085T | Infineon Technologies AG | - Tape and Reel (Alt: CY8C3446LTI-085T) RoHS : Compliant |
| 0 | ||
| CY8C3446LTI-073 | Infineon Technologies AG | MCU 8-Bit PSoC 8051 CISC 64KB Flash 2.5V/3.3V/5V 48-Pin QFN EP Tray - Trays (Alt: CY8C3446LTI-073) RoHS : Compliant |
| 0 | ||
![]() Newark | LTC1446LCS8#PBF | Analog Devices Inc | DAC, 12BIT, SOIC-8, 0 TO 70DEG C; RoHS : Compliant |
| 47 | |
| 3446LANU | Keysight Technologies | 3446LANU / Upgrade- enable rear panel LA; RoHS : Not Compliant |
| 0 | ||
| 3446LANU | Keysight Technologies | TEST ACCESSORY, LAN/LXI WEB INTERFACE; RoHS : Not Compliant |
| 0 | ||
| CY8C3446LTI-085 | Infineon Technologies AG | MCU, 8BIT, 8051/C-M3, 50MHZ, QFN-68; RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | LTC1446LCN8#PBF | Analog Devices Inc | 2x 12-B R2R uP DACs in SO-8 RoHS : Compliant |
| 1,450 | |
| LTC1446LIS8#PBF | Analog Devices Inc | 2x 12-B R2R uP DACs in SO-8 RoHS : Compliant |
| 47 | ||
| LTC1446LCS8#PBF | Analog Devices Inc | 2x 12-B R2R uP DACs in SO-8 RoHS : Compliant |
| 4 | ||
| LTC1446LCS8#TRPBF | Analog Devices Inc | 2x 12-B R2R uP DACs in SO-8 RoHS : Compliant |
| 0 | ||
| LTC1446LIN8#PBF | Analog Devices Inc | 2x 12-B R2R uP DACs in SO-8 RoHS : Compliant |
| 0 | ||
| LTC1446LIS8#TRPBF | Analog Devices Inc | 2x 12-B R2R uP DACs in SO-8 RoHS : Compliant |
| 0 | ||
![]() RS | 446L100 | Gates | POWERGRIP TIMING BELT |
| 0 | |
| 446L075 | Gates | POWERGRIP TIMING BELT |
| 0 | ||
| 446L075G | B&B Electronics Manufacturing Company | TIMING BELT, 0.750" BELT WIDTH, 119 TEETH, 44.625" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 3446LANU | Agilent Technologies Inc | UPGRADE - REAR PANEL LAN/LXI WEB INTERFACE, EXTERNAL TRIGGERING FOR 34460A |
| 0 | ||
| E446L100 | Gates | POWERGRIP TRUMOTION BELTS |
| 0 | ||
| 446L050G | B&B Electronics Manufacturing Company | TIMING BELT, 0.500" BELT WIDTH, 119 TEETH, 44.625" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 446L100G | B&B Electronics Manufacturing Company | TIMING BELT, 1.000" BELT WIDTH, 119 TEETH, 44.625" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| TP446L050 | Gates | POWERGRIP TWIN POWER TIMING BELT |
| 0 | ||
| TP446L100 | Gates | POWERGRIP TWIN POWER TIMING BELT |
| 0 | ||
| 89883446LF | Amphenol FCi | DUBOX |
| 0 | ||
| 7731342446LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| VP544-6LZ1-A | SMC Corporation of America | VALVE, SOL, VP300-700 SERIES |
| 0 | ||
| 0800446:L3 (PMH 0:SYMBOLE L3) | Phoenix Contact | LABELING;WIRE MARKER;TERM BLOCK MARKER |
| 0 | ||
| LT-1541-154-012 (GLT-00103446 | LT-1541-154-012 | LT1541154012) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
| LT-2564-602-012 (GLT-00107446 | LT-2564-602-012 | LT2564602012) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
![]() Bisco Industries | 66446 L-12 | Accurate Screw Machine | 166 | |||
![]() Rochester Electronics | CY8C3446LTI-085 | Infineon Technologies AG | Multifunction Peripheral, CMOS RoHS : Compliant |
| 1,078 | |
| CY8C3446LTI-073 | Infineon Technologies AG | IC MCU 8051 8Bit 1 Core FLASH 64kB (64k x 8) 50MHz 48-QFN Tray RoHS : Compliant |
| 21,658 | ||
CY8C3446LTI-073![]() | Cypress Semiconductor | IC MCU 8051 8Bit 1 Core FLASH 64kB (64k x 8) 50MHz 48-QFN Tray RoHS : Compliant |
| 3,064 | ||
CY8C3446LTI-074![]() | Cypress Semiconductor | Programmable SoC, CMOS RoHS : Compliant |
| 95 | ||
CY8C3446LTI-083![]() | Cypress Semiconductor | Programmable SoC, CMOS RoHS : Compliant |
| 543 | ||
CY8C3446LTI-085![]() | Cypress Semiconductor | Multifunction Peripheral, CMOS RoHS : Compliant |
| 35 | ||
![]() Sager | DW-32-09-F-D-446-LL | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 0 | |
| DW-05-09-F-D-446-LL | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| DW-13-09-F-D-446-LL | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| 0800446:L2 | Phoenix Contact | Terminal Block Tools & Accessories PMH 0:SYMBOLE | 0 | |||
| DW-17-09-F-D-446-LL | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| 0800446:L3 | Phoenix Contact | Terminal Block Tools & Accessories PMH 0:SYMBOLE | 0 | |||
| 0800446:L1 | Phoenix Contact | Terminal Block Tools & Accessories PMH 0:SYMBOLE | 0 | |||
![]() TME | 2446-LAP | Bahco | Knife; Tool length: 225mm; Blade length: 100mm; stainless steel |
| 12 | |
| SB2446-LAP | Bahco | Knife; survival; Tool length: 218mm; Blade length: 102mm |
| 9 | ||
| 52103446LF | Lapp Group | Stopper; M32; 1.5; IP68; brass; nickel; SKINDICHT®; with O-ring |
| 0 | ||
![]() ComSIT USA | LTC1446LCS8PBF | Linear Technology | IC DAC 2 CONV 12Bits Segmented DAC 3-Wire Serial 8-SOIC Tube RoHS : Compliant | 4 | ||
![]() PEI Genesis | WA23-446L | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
![]() Richardson RFPD | E6446LF | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | ||
| LTC1446LCS8#TRPBF | Analog Devices Inc | DAC 2-CH Segment 12-bit 8-Pin SOIC N T/R RoHS : Compliant |
| 0 | ||
| LTC1446LCS8#PBF | Analog Devices Inc | DAC 2-CH Segment 12-bit 8-Pin SOIC N Tube RoHS : Compliant |
| 0 | ||
| LTC1446LIN8#PBF | Analog Devices Inc | DAC 2-CH Segment 12-bit 8-Pin PDIP N Tube RoHS : Compliant |
| 0 | ||
| LTC1446LIS8#PBF | Analog Devices Inc | DAC 2-CH Segment 12-bit 8-Pin SOIC N Tube RoHS : Compliant |
| 0 | ||
| LTC1446LCN8#PBF | Analog Devices Inc | DAC 2-CH Segment 12-bit 8-Pin PDIP N Tube RoHS : Compliant |
| 0 | ||
| LTC1446LIS8#TRPBF | Analog Devices Inc | DAC 2-CH Segment 12-bit 8-Pin SOIC N T/R RoHS : Compliant |
| 0 | ||
![]() Avnet Abacus | 77313-124-46LF | Amphenol Corporation | Conn Unshrouded Header HDR 46 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-124-46LF) RoHS : Compliant | 0 | ||
| DW-13-09-F-D-446-LL | Samtec Inc | Board Stackers Spacers Pin Header 1133 mm 26 Contacts Solder 2 Rows 254 mm DW Series (Alt: DW-13-09-F-D-446-LL) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 10162876-1SF446LF | Amphenol Corporation | FCI10162876-1SF446LF BARKLIP CABLE ASSY, (Alt: 10162876-1SF446LF) RoHS : Compliant |
| 2 | |
| 10172495-1F0446LF | Amphenol Corporation | FCI10172495-1F0446LF COOL POWRE HD TO WI (Alt: 10172495-1F0446LF) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | CY8C3446LTI-073 | Infineon Technologies AG | MCU 8Bit PSoC 8051 CISC 64KB Flash 25V33V5V 48Pin QFN EP Tray (Alt: SP005642783) RoHS : Compliant | 0 | ||
| CY8C3446LTI-085T | Infineon Technologies AG | (Alt: SP005642793) RoHS : Compliant | 0 | |||
![]() FDH Electronics | MS3446L27-50S | TE Connectivity | Connector MIL M |
| 40 | |
| MS3446L27-5S L/C | TE Connectivity | Circular Conn |
| 3 | ||
| MS3446L27-5S | TE Connectivity | Connector MIL M |
| 3 | ||
![]() Flip Electronics | CY8C3446LTI-073T | Cypress Semiconductor | Stock RoHS : Compliant | 27,530 | ||
| CY8C3446LTI-073 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 27,530 | ||
| CY8C3446LTI-083 | Infineon Technologies AG | Stock, Ship Today |
| 736 | ||
![]() Master Electronics | 0800446:L2 | Phoenix Contact | Conductor marking collar - horizontally labeled with the symbol: Symbols - suitable for diameters 1.4 ... 2.5 mm - yellow - width: 3.2 mm RoHS : Compliant |
| 96 | |
| S1SS-20-28-GF-14.46-L3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-08-28-GF-24.46-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-32-09-F-D-446-LL | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-05-09-F-D-446-LL | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| MS3446L27-50S | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| S1SS-05-28C-GF-14.46-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SD-10-28-GF-04.46-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-13-09-F-D-446-LL | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-28-09-F-D-446-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-17-09-F-D-446-LL | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| MS3446L27-5S | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
| DW-28-11-F-D-446-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SD-10-28-GF-24.46-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MS3446L37-50S | TE Connectivity | PLUG ASSY MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W01446LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SSMA Female to SSMA Female Cable Using RG188 Coax with HeatShrink, RoHS. PE3W01446LF/HS is a SSMA female to SSMA female cable using RG188 coax. This Pasternack SSMA female to SSMA female cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SSMA for connector 2. Our female SSMA to female SSMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01446LF/HS SSMA female to SSMA female cable assembly is constructed with RG188 coax. | 0 | ||
| PE34446LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SHV Plug to BNC Female Cable Using RG58 Coax, LF Solder. PE34446LF is a SHV plug to BNC female cable using RG58 coax. This Pasternack SHV plug to BNC female cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm BNC for connector 2. Our plug SHV to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34446LF SHV plug to BNC female cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W14446LF/BR | Pasternack Enterprises | Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. SC Male to SC Male Cable Using RG225, LF Solder. PE3W14446LF/BR is a SC male to SC male cable using RG225 coax. This Pasternack SC male to SC male cable assembly uses a 50 Ohm SC for connector 1 and a 50 Ohm SC for connector 2. Our male SC to male SC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14446LF/BR SC male to SC male cable assembly is constructed with RG225 coax. | 0 | |||
| PE3W16446LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 10KV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10KV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 10KV Male to 10KV Male Cable Using RG58 Coax, LF Solder. PE3W16446LF is a 10KV male to 10KV male cable using RG58 coax. This Pasternack 10KV male to 10KV male cable assembly uses a 50 Ohm 10KV for connector 1 and a 50 Ohm 10KV for connector 2. Our male 10KV to male 10KV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16446LF 10KV male to 10KV male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W02446LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using LMR-400-UF Coax with HeatShrink, LF Solder. PE3W02446LF/HS is a N male right angle to N male cable using LMR-400-UF coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02446LF/HS N male right angle to N male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C1446LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using LMR-600 Coax with HeatShrink, LF Solder, RoHS. PE3C1446LF/HS is a N male right angle to N male right angle cable using LMR-600 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1446LF/HS N male right angle to N male right angle cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C9446LF | Pasternack Enterprises | 0 | ||||
| PE34446LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SHV Plug to BNC Female Cable Using RG58 Coax with HeatShrink, LF Solder, RoHS. PE34446LF/HS is a SHV plug to BNC female cable using RG58 coax. This Pasternack SHV plug to BNC female cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm BNC for connector 2. Our plug SHV to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34446LF/HS SHV plug to BNC female cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C3446LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to BNC Female Bulkhead Cable 36 Inch Length Using RG316 Coax, LF Solder., Radio frequency assembly BNC male to BNC female bulkhead cable 36 inch length using RG316 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC female bulkhead cable 36 inch length using RG316 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3C3446LF-36 can also be known as a BNC plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C3446LF-36 RF cable has a FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our BNC male to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC plug to BNC jack cable assembly PE3C3446LF-36 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3446LF-36 can also be used in the other direction and will be a BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03446LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SSMA Male to SMA Male Cable Using RG316 Coax with HeatShrink, LF Solder, RoHS. PE3W03446LF/HS is a SSMA male to SMA male cable using RG316 coax. This Pasternack SSMA male to SMA male cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SSMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03446LF/HS SSMA male to SMA male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C3446LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to BNC Female Bulkhead Cable 12 Inch Length Using RG316 Coax, LF Solder., Radio frequency assembly BNC male to BNC female bulkhead cable 12 inch length using RG316 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC female bulkhead cable 12 inch length using RG316 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3C3446LF-12 can also be known as a BNC plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C3446LF-12 RF cable has a FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our BNC male to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC plug to BNC jack cable assembly PE3C3446LF-12 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3446LF-12 can also be used in the other direction and will be a BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W20446LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 50 Ohm TNC Male to 75 Ohm BNC Male Cable Using 75 Ohm RG59 Coax, LF Solder. PE3W20446LF is a TNC male to BNC male cable using RG59 coax. This Pasternack TNC male to BNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 75 Ohm BNC for connector 2. Our male TNC to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W20446LF TNC male to BNC male cable assembly is constructed with RG59 coax. | 0 | |||
| PE3C1446LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using LMR-600 Coax, LF Solder. PE3C1446LF is a N male right angle to N male right angle cable using LMR-600 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1446LF N male right angle to N male right angle cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C3446LF-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Female Bulkhead Cable 48 Inch Length Using RG316 Coax, LF Solder., Radio frequency assembly BNC male to BNC female bulkhead cable 48 inch length using RG316 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC female bulkhead cable 48 inch length using RG316 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3C3446LF-48 can also be known as a BNC plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C3446LF-48 RF cable has a FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our BNC male to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC plug to BNC jack cable assembly PE3C3446LF-48 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3446LF-48 can also be used in the other direction and will be a BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3446LF-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. BNC Male to BNC Female Bulkhead Cable 72 Inch Length Using RG316 Coax, LF Solder., Radio frequency assembly BNC male to BNC female bulkhead cable 72 inch length using RG316 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC female bulkhead cable 72 inch length using RG316 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3C3446LF-72 can also be known as a BNC plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C3446LF-72 RF cable has a FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our BNC male to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC plug to BNC jack cable assembly PE3C3446LF-72 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3446LF-72 can also be used in the other direction and will be a BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | LTC1446LIN8 | Analog Devices Inc | D/A Converter, 2 Func, Serial Input Loading, 14us Settling Time, PDIP8 RoHS : Not Compliant | 11,908 | ||
| LTC1446LIS8#PBF | Analog Devices Inc | D/A Converter, 2 Func, Serial Input Loading, 14us Settling Time, PDSO8 RoHS : Compliant | 10,734 | |||
| LTC1446LCS8#TRPBF | Analog Devices Inc | D/A Converter, 2 Func, Serial Input Loading, 14us Settling Time, PDSO8 RoHS : Compliant | 10,655 | |||
| LTC1446LCS8#PBF | Analog Devices Inc | D/A Converter, 2 Func, Serial Input Loading, 14us Settling Time, PDSO8 RoHS : Compliant | 10,414 | |||
| LTC1446LIS8 | Analog Devices Inc | D/A Converter, 2 Func, Serial Input Loading, 14us Settling Time, PDSO8 RoHS : Not Compliant | 10,369 | |||
| LTC1446LCN8-PBF | Analog Devices Inc | 10,118 | ||||
| LTC1446LCS8-PBF | Analog Devices Inc | 9,588 | ||||
| LTC1446LIN8-PBF | Analog Devices Inc | 9,314 | ||||
| LTC1446LIS8-TRPBF | Analog Devices Inc | 8,851 | ||||
| LTC1446LCS8#TR | Analog Devices Inc | D/A Converter, 2 Func, Serial Input Loading, 14us Settling Time, PDSO8 RoHS : Not Compliant | 8,433 | |||
| DW-13-09-F-D-446-LL | Samtec Inc | Board Stacking Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator RoHS : Compliant | 6,322 | |||
| LTC1446LCN8 | Analog Devices Inc | D/A Converter, 2 Func, Serial Input Loading, 14us Settling Time, PDIP8 RoHS : Not Compliant | 6,014 | |||
| LTC1446LIS8#TR | Analog Devices Inc | D/A Converter, 2 Func, Serial Input Loading, 14us Settling Time, PDSO8 RoHS : Not Compliant | 5,200 | |||
LTC1446LIN8#PBF![]() | Linear Technology | D/A Converter, 2 Func, Serial Input Loading, 14us Settling Time, PDIP8 RoHS : Compliant | 893 | |||
| 72V51446L6BB8 | Integrated Device Technology Inc | FIFO, 32KX36, 3.7ns, Synchronous, CMOS, PBGA256 RoHS : Not Compliant | 651 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |